def __init__(self):
self.logs = []
self.monitor = Monitor("config.json")
self.o = TerminalOutput()
#self.tMonitor = threading.Thread(target=self.monitor.Start, daemon=True)
pass
def test_ReportIcmpMS():
m = Monitor(IConfig("example.yaml"))
m.Start()
item = m.report[0]
if item.ms == 0:
assert True
def test_ReportIcmpStatus():
m = Monitor(IConfig("example.yaml"))
m.Start()
item = m.report[0]
if item.status == "Online":
assert True
def __init__(self, config: IConfig):
self.iconfig = config
self.logs = []
self.config = ContextConfig(config)
self.config.GetWorkingConfigClass(True)
self.config.ReadConfig()
# Seem to get strange results for passing the interface around.
# Move to a common storage place or move the result into monitor?
self.monitor = Monitor(IConfig(config.argPathConfig))
self.monitor.configuration = self.config.configuration
self.columnCount = 4
pass
class uiMain():
def __init__(self, config: IConfig):
self.iconfig = config
self.logs = []
self.config = ContextConfig(config)
self.config.GetWorkingConfigClass(True)
self.config.ReadConfig()
# Seem to get strange results for passing the interface around.
# Move to a common storage place or move the result into monitor?
self.monitor = Monitor(IConfig(config.argPathConfig))
self.monitor.configuration = self.config.configuration
self.columnCount = 4
pass
def Start(self):
ch = CursesHelper()
ch.WindowNew()
self.__RenderWindow(ch.stdscr)
#curses.wrapper(self.__RenderWindow)
pass
def __RenderWindow(self, stdscr):
ch = CursesHelper()
# Make this window not block.
# Lets the window keep looping but at the same time watches for key strokes
#stdscr.nodelay(True)
curses.halfdelay(10)
ch.stdscr = stdscr
self.monitor.Start(True)
self.__GenLogData()
# clear the scree and refresh
ch.WindowClear()
ch.WindowRefresh()
# Start colors in curses
curses.start_color()
curses.init_pair(1, curses.COLOR_MAGENTA, curses.COLOR_BLACK)
curses.init_pair(2, curses.COLOR_RED, curses.COLOR_BLACK)
curses.init_pair(4, curses.COLOR_GREEN, curses.COLOR_BLACK)
curses.init_pair(3, curses.COLOR_BLACK, curses.COLOR_WHITE)
# Refresh the screen with new data every 5 seconds
#dtRefresh = datetime.now()
# Checking to see if the last key that was entered was 'F12'
while (ch.key != curses.KEY_F12):
#ch.WindowClear()
#stdscr.clear()
# Tells us the screens height and width
ch.CursorMove()
if ch.key == curses.KEY_F2:
self.monitor.Start(force=True)
ch.WindowClear()
ch.WindowRefresh()
ch.key = 0
elif ch.key == curses.KEY_F10:
ch = self.__TuiHelp(stdscr)
ch.WindowRefresh()
elif ch.key == curses.KEY_F9:
ch = self.__TuiLogs(stdscr)
ch.WindowRefresh()
else:
# Render title
self.monitor.Start()
#ch.WindowRefresh()
ch.UpdateScreenSize()
self.__InsertTitle(stdscr)
self.__InsertColHeader(stdscr, ch)
self.__InsertLine(stdscr, ch, 2)
self.__InsertFooter(stdscr, ch)
#ch.CursorMove()
# Update the screen
#ch.WindowRefresh()
ch.GetCharacter()
#time.sleep(.1)
# Close key was pressed
ch.WindowClose()
def __GenLogData(self):
i = 0
while i < 10:
self.logs.insert(
self.logs.__len__() + 1,
LogsCol(level='debug',
message='Unable to reach service.',
name='Google',
address="www.google.com",
protocol='ICMP'))
i = i + 1
def __TuiHelp(self, stdscr):
h = uiHelp()
h.Start()
ch = CursesHelper()
curses.halfdelay(10)
ch.stdscr = stdscr
ch.SetCharacterBlockingMode(True)
ch.WindowClear()
ch.WindowRefresh()
ch.key = 0
return ch
def __TuiLogs(self, stdscr):
l = uiLogs()
l.logs = self.logs
l.Start()
# Once we come back here, update ch with the current stdscr
# Helps to make the window accept input again
ch = CursesHelper()
curses.halfdelay(10)
ch.stdscr = stdscr
ch.SetCharacterBlockingMode(True)
ch.WindowClear()
ch.WindowRefresh()
ch.key = 0
return ch
def __InsertTitle(self, stdscr):
res = self.monitor.refresh.GetNextRefresh()
#res = CleanTime().GetNextNodeRefreshTime(self.monitor.iconfig.SleepInterval, self.monitor.LastRefresh)
title = f"|NetworkMonitor |Refresh@{res} | "
stdscr.attron(curses.color_pair(3))
stdscr.addstr(0, 0, title, curses.color_pair(1))
stdscr.attroff(curses.color_pair(3))
pass
def __InsertFooter(self, stdscr, ch: CursesHelper):
statusbarstr = "|F2|Refresh |F9|Logs |F10|Help |F12|Quit"
stdscr.attron(curses.color_pair(3))
stdscr.addstr(ch.height - 1, 0, statusbarstr)
stdscr.addstr(ch.height - 1, len(statusbarstr),
" " * (ch.width - len(statusbarstr) - 1))
stdscr.attroff(curses.color_pair(3))
pass
def __InsertColHeader(self, stdscr, ch: CursesHelper):
#o = TerminalOutput()
hName = ch.AdjustColumn("Name", ch.width / 4)
hStatus = ch.AdjustColumn("Status", ch.width / 4)
hProtocol = ch.AdjustColumn("Protocol", ch.width / 4)
hMs = ch.AdjustColumn("MS", ch.width / 4)
header = f"{hName}{hStatus}{hProtocol}{hMs}"
stdscr.attron(curses.color_pair(3))
stdscr.addstr(1, 0, header)
#stdscr.addstr(2, len(header), " " * (ch.width - len(header) - 1))
stdscr.attroff(curses.color_pair(3))
pass
def __InsertLine(self, stdscr, ch: CursesHelper, yCord):
#o = TerminalOutput()
reports = self.monitor.report
for i in reports:
lName = ch.AdjustColumn(i.name, ch.width / 4)
lStatus = ch.AdjustColumn(i.status, ch.width / 4)
lProtocol = ch.AdjustColumn(i.protocol.upper(), ch.width / 4)
lMs = ch.AdjustColumn(str(i.ms), ch.width / 4)
line: str = f"{lName}{lStatus}{lProtocol}{lMs}"
if i.status == "Offline":
stdscr.attron(curses.color_pair(2))
stdscr.addstr(yCord, 0, line)
stdscr.attroff(curses.color_pair(2))
elif i.status == "Online":
stdscr.attron(curses.color_pair(4))
stdscr.addstr(yCord, 0, line)
stdscr.attroff(curses.color_pair(4))
else:
stdscr.addstr(yCord, 0, line)
yCord = yCord + 1
pass
def test_CallMonitor():
m = Monitor(IConfig("example.yaml"))
if m.__configuration__.nodes.__len__() == 4:
assert True
def test_ReportLen():
m = Monitor(IConfig("example.yaml"))
m.Start()
if m.report.__len__() == 4:
assert True
class uiMain():
def __init__(self):
self.logs = []
self.monitor = Monitor("config.json")
self.o = TerminalOutput()
#self.tMonitor = threading.Thread(target=self.monitor.Start, daemon=True)
pass
def Start(self):
ch = CursesHelper()
ch.WindowNew()
self.__RenderWindow(ch.stdscr)
#curses.wrapper(self.__RenderWindow)
pass
def __RenderWindow(self, stdscr):
ch = CursesHelper()
ch.stdscr = stdscr
#th = threading.Thread(target=self.monitor.Start, daemon=True)
#th.start()
self.monitor.Start(True)
self.__GenLogData()
# clear the scree and refresh
ch.WindowClear()
ch.WindowRefresh()
# Start colors in curses
curses.start_color()
curses.init_pair(1, curses.COLOR_MAGENTA, curses.COLOR_BLACK)
curses.init_pair(2, curses.COLOR_RED, curses.COLOR_BLACK)
curses.init_pair(3, curses.COLOR_BLACK, curses.COLOR_WHITE)
# Refresh the screen with new data every 5 seconds
dtRefresh = datetime.now()
# Checking to see if the last key that was entered was 'F12'
while (ch.key != curses.KEY_F12):
ch.WindowClear()
#stdscr.clear()
# Tells us the screens height and width
ch.CursorMove()
if ch.key == curses.KEY_F2:
self.monitor.Start(force=True)
ch.WindowClear()
ch.WindowRefresh()
ch.key = 0
elif ch.key == curses.KEY_F10:
ch = self.__TuiHelp(stdscr)
elif ch.key == curses.KEY_F9:
ch = self.__TuiLogs(stdscr)
else:
# Render title
self.monitor.Start()
self.__InsertTitle(stdscr)
self.__InsertColHeader(stdscr, ch)
self.__InsertLine(stdscr, ch, 2)
self.__InsertFooter(stdscr, ch)
ch.CursorMove()
# Update the screen
ch.WindowRefresh()
ch.GetCharacter()
pass
# Close key was pressed
ch.WindowClose()
def __GenLogData(self):
i = 0
while i < 10:
self.logs.insert(
self.logs.__len__() + 1,
LogsCol(level='debug',
message='Unable to reach service.',
name='Google',
address="www.google.com",
protocol='ICMP'))
i = i + 1
def __TuiHelp(self, stdscr):
h = uiHelp()
h.Start()
ch = CursesHelper()
ch.stdscr = stdscr
ch.WindowClear()
ch.WindowRefresh()
ch.key = 0
return ch
def __TuiLogs(self, stdscr):
l = uiLogs()
l.logs = self.logs
l.Start()
# Once we come back here, update ch with the current stdscr
# Helps to make the window accept input again
ch = CursesHelper()
ch.stdscr = stdscr
ch.WindowClear()
ch.WindowRefresh()
ch.key = 0
return ch
def __InsertTitle(self, stdscr):
h = Helper()
res = h.GetNextNodeRefreshTime(self.monitor.c.SleepTimer,
self.monitor.LastRefresh)
title = f"NetworkMonitor - Refresh@{res}"
stdscr.attron(curses.color_pair(3))
stdscr.addstr(0, 0, title, curses.color_pair(1))
stdscr.attroff(curses.color_pair(3))
pass
def __InsertFooter(self, stdscr, ch: CursesHelper):
statusbarstr = "|F2|Refresh |F9|Logs |F10|Help |F12|Quit"
stdscr.attron(curses.color_pair(3))
stdscr.addstr(ch.height - 1, 0, statusbarstr)
stdscr.addstr(ch.height - 1, len(statusbarstr),
" " * (ch.width - len(statusbarstr) - 1))
stdscr.attroff(curses.color_pair(3))
pass
def __InsertColHeader(self, stdscr, ch: CursesHelper):
o = TerminalOutput()
hName = o.AdjustColumn("Name", ch.width / 3)
hStatus = o.AdjustColumn("Status", ch.width / 3)
hProtocol = o.AdjustColumn("Protocol", ch.width / 3)
header = f"{hName}{hStatus}{hProtocol}"
stdscr.attron(curses.color_pair(3))
stdscr.addstr(1, 0, header)
#stdscr.addstr(2, len(header), " " * (ch.width - len(header) - 1))
stdscr.attroff(curses.color_pair(3))
pass
def __InsertLine(self, stdscr, ch: CursesHelper, yCord):
o = TerminalOutput()
reports = self.monitor.report
for i in reports:
lName = o.AdjustColumn(i.name, ch.width / 3)
lStatus = o.AdjustColumn(i.status, ch.width / 3)
lProtocol = o.AdjustColumn(i.protocol.upper(), ch.width / 3)
line: str = f"{lName}{lStatus}{lProtocol}"
stdscr.addstr(yCord, 0, line)
yCord = yCord + 1
pass