예제 #1
0
    def test(self):
        lon, lat = geodetic.point_at(10.0, 20.0, 30.0, 50.0)
        self.assertAlmostEqual(lon, 10.239856504796101, places=6)
        self.assertAlmostEqual(lat, 20.38925590463351, places=6)

        lon, lat = geodetic.point_at(-13.5, 22.4, -140.0, 120.0)
        self.assertAlmostEqual(lon, -14.245910669126582, places=6)
        self.assertAlmostEqual(lat, 21.57159463157223, places=6)
예제 #2
0
    def test(self):
        lon, lat = geodetic.point_at(10.0, 20.0, 30.0, 50.0)
        self.assertAlmostEqual(lon, 10.239856504796101, places=6)
        self.assertAlmostEqual(lat, 20.38925590463351, places=6)

        lon, lat = geodetic.point_at(-13.5, 22.4, -140.0, 120.0)
        self.assertAlmostEqual(lon, -14.245910669126582, places=6)
        self.assertAlmostEqual(lat, 21.57159463157223, places=6)
예제 #3
0
    def point_at(self, horizontal_distance, vertical_increment, azimuth):
        """
        Compute the point with given horizontal, vertical distances
        and azimuth from this point.

        :param horizontal_distance:
            Horizontal distance, in km.
        :type horizontal_distance:
            float
        :param vertical_increment:
            Vertical increment, in km. When positive, the new point
            has a greater depth. When negative, the new point
            has a smaller depth.
        :type vertical_increment:
            float
        :type azimuth:
            Azimuth, in decimal degrees.
        :type azimuth:
            float
        :returns:
            The point at the given distances.
        :rtype:
            Instance of :class:`Point`
        """
        lon, lat = geodetic.point_at(self.longitude, self.latitude, azimuth,
                                     horizontal_distance)
        return Point(lon, lat, self.depth + vertical_increment)
예제 #4
0
    def translate(self, p1, p2):
        """
        Translate the surface for a specific distance along a specific azimuth
        direction.

        Parameters are two points (instances of :class:`nhlib.geo.point.Point`)
        representing the direction and an azimuth for translation. The
        resulting surface corner points will be that far along that azimuth
        from respective corner points of this surface as ``p2`` is located
        with respect to ``p1``.

        :returns:
            A new :class:`PlanarSurface` object with the same mesh spacing,
            dip, strike, width, length and depth but with corners longitudes
            and latitudes translated.
        """
        azimuth = geodetic.azimuth(p1.longitude, p1.latitude,
                                   p2.longitude, p2.latitude)
        distance = geodetic.geodetic_distance(p1.longitude, p1.latitude,
                                              p2.longitude, p2.latitude)
        # avoid calling PlanarSurface's constructor
        nsurf = object.__new__(PlanarSurface)
        # but do call BaseSurface's one
        BaseSurface.__init__(nsurf)
        nsurf.mesh_spacing = self.mesh_spacing
        nsurf.dip = self.dip
        nsurf.strike = self.strike
        nsurf.corner_lons, nsurf.corner_lats = geodetic.point_at(
            self.corner_lons, self.corner_lats, azimuth, distance
        )
        nsurf.corner_depths = self.corner_depths.copy()
        nsurf._init_plane()
        nsurf.width = self.width
        nsurf.length = self.length
        return nsurf
예제 #5
0
파일: point.py 프로젝트: angri/nhlib
    def point_at(self, horizontal_distance, vertical_increment, azimuth):
        """
        Compute the point with given horizontal, vertical distances
        and azimuth from this point.

        :param horizontal_distance:
            Horizontal distance, in km.
        :type horizontal_distance:
            float
        :param vertical_increment:
            Vertical increment, in km. When positive, the new point
            has a greater depth. When negative, the new point
            has a smaller depth.
        :type vertical_increment:
            float
        :type azimuth:
            Azimuth, in decimal degrees.
        :type azimuth:
            float
        :returns:
            The point at the given distances.
        :rtype:
            Instance of :class:`Point`
        """
        lon, lat = geodetic.point_at(self.longitude, self.latitude,
                                     azimuth, horizontal_distance)
        return Point(lon, lat, self.depth + vertical_increment)
예제 #6
0
파일: planar.py 프로젝트: angri/nhlib
    def translate(self, p1, p2):
        """
        Translate the surface for a specific distance along a specific azimuth
        direction.

        Parameters are two points (instances of :class:`nhlib.geo.point.Point`)
        representing the direction and an azimuth for translation. The
        resulting surface corner points will be that far along that azimuth
        from respective corner points of this surface as ``p2`` is located
        with respect to ``p1``.

        :returns:
            A new :class:`PlanarSurface` object with the same mesh spacing,
            dip, strike, width, length and depth but with corners longitudes
            and latitudes translated.
        """
        azimuth = geodetic.azimuth(p1.longitude, p1.latitude,
                                   p2.longitude, p2.latitude)
        distance = geodetic.geodetic_distance(p1.longitude, p1.latitude,
                                              p2.longitude, p2.latitude)
        # avoid calling PlanarSurface's constructor
        nsurf = object.__new__(PlanarSurface)
        # but do call BaseSurface's one
        BaseSurface.__init__(nsurf)
        nsurf.mesh_spacing = self.mesh_spacing
        nsurf.dip = self.dip
        nsurf.strike = self.strike
        nsurf.corner_lons, nsurf.corner_lats = geodetic.point_at(
            self.corner_lons, self.corner_lats, azimuth, distance
        )
        nsurf.corner_depths = self.corner_depths.copy()
        nsurf._init_plane()
        nsurf.width = self.width
        nsurf.length = self.length
        return nsurf
예제 #7
0
    def discretize(self, mesh_spacing):
        """
        Get a mesh of uniformly spaced points inside the polygon area
        with distance of ``mesh_spacing`` km between.

        :returns:
            An instance of :class:`~nhlib.geo.mesh.Mesh` that holds
            the points data. Mesh is created with no depth information
            (all the points are on the Earth surface).
        """
        self._init_polygon2d()

        west, east, north, south = self._bbox

        lons = []
        lats = []

        # we cover the bounding box (in spherical coordinates) from highest
        # to lowest latitude and from left to right by longitude. we step
        # by mesh spacing distance (linear measure). we check each point
        # if it is inside the polygon and yield the point object, if so.
        # this way we produce an uniformly-spaced mesh regardless of the
        # latitude.
        latitude = north
        while latitude > south:
            longitude = west
            while utils.get_longitudinal_extent(longitude, east) > 0:
                # we use Cartesian space just for checking if a point
                # is inside of the polygon.
                x, y = self._projection(longitude, latitude)
                if self._polygon2d.contains(shapely.geometry.Point(x, y)):
                    lons.append(longitude)
                    lats.append(latitude)

                # move by mesh spacing along parallel...
                longitude, _, = geodetic.point_at(longitude, latitude, 90,
                                                  mesh_spacing)
            # ... and by the same distance along meridian in outer one
            _, latitude = geodetic.point_at(west, latitude, 180, mesh_spacing)

        lons = numpy.array(lons)
        lats = numpy.array(lats)

        return Mesh(lons, lats, depths=None)
예제 #8
0
    def discretize(self, mesh_spacing):
        """
        Get a mesh of uniformly spaced points inside the polygon area
        with distance of ``mesh_spacing`` km between.

        :returns:
            An instance of :class:`~nhlib.geo.mesh.Mesh` that holds
            the points data. Mesh is created with no depth information
            (all the points are on the Earth surface).
        """
        self._init_polygon2d()

        west, east, north, south = self._bbox

        lons = []
        lats = []

        # we cover the bounding box (in spherical coordinates) from highest
        # to lowest latitude and from left to right by longitude. we step
        # by mesh spacing distance (linear measure). we check each point
        # if it is inside the polygon and yield the point object, if so.
        # this way we produce an uniformly-spaced mesh regardless of the
        # latitude.
        latitude = north
        while latitude > south:
            longitude = west
            while utils.get_longitudinal_extent(longitude, east) > 0:
                # we use Cartesian space just for checking if a point
                # is inside of the polygon.
                x, y = self._projection(longitude, latitude)
                if self._polygon2d.contains(shapely.geometry.Point(x, y)):
                    lons.append(longitude)
                    lats.append(latitude)

                # move by mesh spacing along parallel...
                longitude, _, = geodetic.point_at(longitude, latitude,
                                                  90, mesh_spacing)
            # ... and by the same distance along meridian in outer one
            _, latitude = geodetic.point_at(west, latitude, 180, mesh_spacing)

        lons = numpy.array(lons)
        lats = numpy.array(lats)

        return Mesh(lons, lats, depths=None)
예제 #9
0
파일: _utils.py 프로젝트: GEMStudents/nhlib
def get_middle_point(lon1, lat1, lon2, lat2):
    """
    Given two points return the point exactly in the middle lying on the same
    great circle arc.

    Parameters are point coordinates in degrees.

    :returns:
        Tuple of longitude and latitude of the point in the middle.
    """
    if lon1 == lon2 and lat1 == lat2:
        return lon1, lat1
    dist = geodetic.geodetic_distance(lon1, lat1, lon2, lat2)
    azimuth = geodetic.azimuth(lon1, lat1, lon2, lat2)
    return geodetic.point_at(lon1, lat1, azimuth, dist / 2.0)
예제 #10
0
파일: utils.py 프로젝트: angri/nhlib
def get_middle_point(lon1, lat1, lon2, lat2):
    """
    Given two points return the point exactly in the middle lying on the same
    great circle arc.

    Parameters are point coordinates in degrees.

    :returns:
        Tuple of longitude and latitude of the point in the middle.
    """
    if lon1 == lon2 and lat1 == lat2:
        return lon1, lat1
    dist = geodetic.geodetic_distance(lon1, lat1, lon2, lat2)
    azimuth = geodetic.azimuth(lon1, lat1, lon2, lat2)
    return geodetic.point_at(lon1, lat1, azimuth, dist / 2.0)
예제 #11
0
 def test_zero_distance(self):
     lon, lat = geodetic.point_at(1.3, -5.6, -35.0, 0)
     self.assertAlmostEqual(lon, 1.3)
     self.assertAlmostEqual(lat, -5.6)
예제 #12
0
 def test_zero_distance(self):
     lon, lat = geodetic.point_at(1.3, -5.6, -35.0, 0)
     self.assertAlmostEqual(lon, 1.3)
     self.assertAlmostEqual(lat, -5.6)