def testCommandLine(self):
cmd = ns3.CommandLine()
cmd.AddValue("Test1", "this is a test option")
cmd.AddValue("Test2", "this is a test option")
cmd.AddValue("Test3", "this is a test option", variable="test_xxx")
cmd.Test1 = None
cmd.Test2 = None
cmd.test_xxx = None
class Foo:
pass
foo = Foo()
foo.test_foo = None
cmd.AddValue("Test4",
"this is a test option",
variable="test_foo",
namespace=foo)
cmd.Parse([
"python", "--Test1=value1", "--Test2=value2", "--Test3=123",
"--Test4=xpto"
])
self.assertEqual(cmd.Test1, "value1")
self.assertEqual(cmd.Test2, "value2")
self.assertEqual(cmd.test_xxx, "123")
self.assertEqual(foo.test_foo, "xpto")
def main(argv):
#
# Allow the user to override any of the defaults and the above Bind() at
# run-time, via command-line arguments
#
cmd = ns3.CommandLine()
cmd.Parse(argv)
#
# But since this is a realtime script, don't allow the user to mess with
# that.
#
ns3.GlobalValue.Bind("SimulatorImplementationType",
ns3.StringValue("ns3::RealtimeSimulatorImpl"))
#
# Explicitly create the nodes required by the topology (shown above).
#
print "Create nodes."
n = ns3.NodeContainer()
n.Create(4)
internet = ns3.InternetStackHelper()
internet.Install(n)
#
# Explicitly create the channels required by the topology (shown above).
#
print("Create channels.")
csma = ns3.CsmaHelper()
csma.SetChannelAttribute("DataRate",
ns3.DataRateValue(ns3.DataRate(5000000)))
csma.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(2)))
csma.SetDeviceAttribute("Mtu", ns3.UintegerValue(1400))
d = csma.Install(n)
#
# We've got the "hardware" in place. Now we need to add IP addresses.
#
print("Assign IP Addresses.")
ipv4 = ns3.Ipv4AddressHelper()
ipv4.SetBase(ns3.Ipv4Address("10.1.1.0"), ns3.Ipv4Mask("255.255.255.0"))
i = ipv4.Assign(d)
print("Create Applications.")
#
# Create a UdpEchoServer application on node one.
#
port = 9 # well-known echo port number
server = ns3.UdpEchoServerHelper(port)
apps = server.Install(n.Get(1))
apps.Start(ns3.Seconds(1.0))
apps.Stop(ns3.Seconds(10.0))
#
# Create a UdpEchoClient application to send UDP datagrams from node zero to
# node one.
#
packetSize = 1024
maxPacketCount = 500
interPacketInterval = ns3.Seconds(0.01)
client = ns3.UdpEchoClientHelper(i.GetAddress(1), port)
client.SetAttribute("MaxPackets", ns3.UintegerValue(maxPacketCount))
client.SetAttribute("Interval", ns3.TimeValue(interPacketInterval))
client.SetAttribute("PacketSize", ns3.UintegerValue(packetSize))
apps = client.Install(n.Get(0))
apps.Start(ns3.Seconds(2.0))
apps.Stop(ns3.Seconds(10.0))
ascii = ns3.AsciiTraceHelper()
csma.EnableAsciiAll(ascii.CreateFileStream("realtime-udp-echo.tr"))
csma.EnablePcapAll("realtime-udp-echo", False)
#
# Now, do the actual simulation.
#
print("Run Simulation.")
ns3.Simulator.Run()
ns3.Simulator.Destroy()
print("Done.")
def main(argv):
cmd = ns3.CommandLine()
cmd.Parse(argv)
# Create nodes
print "Create nodes"
n0 = ns3.Node()
r = ns3.Node()
n1 = ns3.Node()
net1 = ns3.NodeContainer()
net1.Add(n0)
net1.Add(r)
net2 = ns3.NodeContainer()
net2.Add(r)
net2.Add(n1)
all = ns3.NodeContainer()
all.Add(n0)
all.Add(r)
all.Add(n1)
# Create IPv6 Internet Stack
internetv6 = ns3.InternetStackHelper()
internetv6.Install(all)
# Create channels
csma = ns3.CsmaHelper()
csma.SetChannelAttribute("DataRate",
ns3.DataRateValue(ns3.DataRate(5000000)))
csma.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(2)))
d1 = csma.Install(net1)
d2 = csma.Install(net2)
# Create networks and assign IPv6 Addresses
print "Addressing"
ipv6 = ns3.Ipv6AddressHelper()
ipv6.NewNetwork(ns3.Ipv6Address("2001:1::"), ns3.Ipv6Prefix(64))
i1 = ipv6.Assign(d1)
i1.SetRouter(1, True)
ipv6.NewNetwork(ns3.Ipv6Address("2001:2::"), ns3.Ipv6Prefix(64))
i2 = ipv6.Assign(d2)
i2.SetRouter(0, True)
# Create a Ping6 application to send ICMPv6 echo request from n0 to n1 via r
print "Application"
packetSize = 1024
maxPacketCount = 5
interPacketInterval = ns3.Seconds(1.)
ping6 = ns3.Ping6Helper()
ping6.SetLocal(i1.GetAddress(0, 1))
ping6.SetRemote(i2.GetAddress(1, 1))
ping6.SetAttribute("MaxPackets", ns3.UintegerValue(maxPacketCount))
ping6.SetAttribute("Interval", ns3.TimeValue(interPacketInterval))
ping6.SetAttribute("PacketSize", ns3.UintegerValue(packetSize))
apps = ping6.Install(ns3.NodeContainer(net1.Get(0)))
apps.Start(ns3.Seconds(2.0))
apps.Stop(ns3.Seconds(20.0))
print "Tracing"
ascii = ns3.ofstream("simple-routing-ping6.tr")
ns3.CsmaHelper.EnableAsciiAll(ascii)
ns3.CsmaHelper.EnablePcapAll("simple-routing-ping6", True)
# Run Simulation
ns3.Simulator.Run()
ns3.Simulator.Destroy()
def main(argv):
#
# First, we declare and initialize a few local variables that control some
# simulation parameters.
#
backboneNodes = 10
infraNodes = 5
lanNodes = 5
stopTime = 10
#
# Simulation defaults are typically set next, before command line
# arguments are parsed.
#
ns3.Config.SetDefault("ns3::OnOffApplication::PacketSize",
ns3.StringValue("210"))
ns3.Config.SetDefault("ns3::OnOffApplication::DataRate",
ns3.StringValue("448kb/s"))
#
# For convenience, we add the local variables to the command line argument
# system so that they can be overridden with flags such as
# "--backboneNodes=20"
#
cmd = ns3.CommandLine()
#cmd.AddValue("backboneNodes", "number of backbone nodes", backboneNodes)
#cmd.AddValue("infraNodes", "number of leaf nodes", infraNodes)
#cmd.AddValue("lanNodes", "number of LAN nodes", lanNodes)
#cmd.AddValue("stopTime", "simulation stop time(seconds)", stopTime)
#
# The system global variables and the local values added to the argument
# system can be overridden by command line arguments by using this call.
#
cmd.Parse(argv)
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # /
# #
# Construct the backbone #
# #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # /
#
# Create a container to manage the nodes of the adhoc(backbone) network.
# Later we'll create the rest of the nodes we'll need.
#
backbone = ns3.NodeContainer()
backbone.Create(backboneNodes)
#
# Create the backbone wifi net devices and install them into the nodes in
# our container
#
wifi = ns3.WifiHelper()
mac = ns3.NqosWifiMacHelper.Default()
mac.SetType("ns3::AdhocWifiMac")
wifi.SetRemoteStationManager("ns3::ConstantRateWifiManager", "DataMode",
ns3.StringValue("OfdmRate54Mbps"))
wifiPhy = ns3.YansWifiPhyHelper.Default()
wifiChannel = ns3.YansWifiChannelHelper.Default()
wifiPhy.SetChannel(wifiChannel.Create())
backboneDevices = wifi.Install(wifiPhy, mac, backbone)
#
# Add the IPv4 protocol stack to the nodes in our container
#
print "Enabling OLSR routing on all backbone nodes"
internet = ns3.InternetStackHelper()
olsr = ns3.OlsrHelper()
internet.SetRoutingHelper(olsr)
internet.Install(backbone)
# re-initialize for non-olsr routing.
internet.Reset()
#
# Assign IPv4 addresses to the device drivers(actually to the associated
# IPv4 interfaces) we just created.
#
ipAddrs = ns3.Ipv4AddressHelper()
ipAddrs.SetBase(ns3.Ipv4Address("192.168.0.0"),
ns3.Ipv4Mask("255.255.255.0"))
ipAddrs.Assign(backboneDevices)
#
# The ad-hoc network nodes need a mobility model so we aggregate one to
# each of the nodes we just finished building.
#
mobility = ns3.MobilityHelper()
positionAlloc = ns3.ListPositionAllocator()
x = 0.0
for i in range(backboneNodes):
positionAlloc.Add(ns3.Vector(x, 0.0, 0.0))
x += 5.0
mobility.SetPositionAllocator(positionAlloc)
mobility.SetMobilityModel(
"ns3::RandomDirection2dMobilityModel", "Bounds",
ns3.RectangleValue(ns3.Rectangle(0, 1000, 0, 1000)), "Speed",
ns3.RandomVariableValue(ns3.ConstantVariable(2000)), "Pause",
ns3.RandomVariableValue(ns3.ConstantVariable(0.2)))
mobility.Install(backbone)
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # /
# #
# Construct the LANs #
# #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # /
# Reset the address base-- all of the CSMA networks will be in
# the "172.16 address space
ipAddrs.SetBase(ns3.Ipv4Address("172.16.0.0"),
ns3.Ipv4Mask("255.255.255.0"))
for i in range(backboneNodes):
print "Configuring local area network for backbone node ", i
#
# Create a container to manage the nodes of the LAN. We need
# two containers here; one with all of the new nodes, and one
# with all of the nodes including new and existing nodes
#
newLanNodes = ns3.NodeContainer()
newLanNodes.Create(lanNodes - 1)
# Now, create the container with all nodes on this link
lan = ns3.NodeContainer(ns3.NodeContainer(backbone.Get(i)),
newLanNodes)
#
# Create the CSMA net devices and install them into the nodes in our
# collection.
#
csma = ns3.CsmaHelper()
csma.SetChannelAttribute("DataRate",
ns3.DataRateValue(ns3.DataRate(5000000)))
csma.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(2)))
lanDevices = csma.Install(lan)
#
# Add the IPv4 protocol stack to the new LAN nodes
#
internet.Install(newLanNodes)
#
# Assign IPv4 addresses to the device drivers(actually to the
# associated IPv4 interfaces) we just created.
#
ipAddrs.Assign(lanDevices)
#
# Assign a new network prefix for the next LAN, according to the
# network mask initialized above
#
ipAddrs.NewNetwork()
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # /
# #
# Construct the mobile networks #
# #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # /
# Reset the address base-- all of the 802.11 networks will be in
# the "10.0" address space
ipAddrs.SetBase(ns3.Ipv4Address("10.0.0.0"), ns3.Ipv4Mask("255.255.255.0"))
for i in range(backboneNodes):
print "Configuring wireless network for backbone node ", i
#
# Create a container to manage the nodes of the LAN. We need
# two containers here; one with all of the new nodes, and one
# with all of the nodes including new and existing nodes
#
stas = ns3.NodeContainer()
stas.Create(infraNodes - 1)
# Now, create the container with all nodes on this link
infra = ns3.NodeContainer(ns3.NodeContainer(backbone.Get(i)), stas)
#
# Create another ad hoc network and devices
#
ssid = ns3.Ssid('wifi-infra' + str(i))
wifiInfra = ns3.WifiHelper.Default()
wifiPhy.SetChannel(wifiChannel.Create())
wifiInfra.SetRemoteStationManager('ns3::ArfWifiManager')
macInfra = ns3.NqosWifiMacHelper.Default()
macInfra.SetType("ns3::NqstaWifiMac", "Ssid", ns3.SsidValue(ssid),
"ActiveProbing", ns3.BooleanValue(False))
# setup stas
staDevices = wifiInfra.Install(wifiPhy, macInfra, stas)
# setup ap.
macInfra.SetType("ns3::NqapWifiMac", "Ssid",
ns3.SsidValue(ssid), "BeaconGeneration",
ns3.BooleanValue(True), "BeaconInterval",
ns3.TimeValue(ns3.Seconds(2.5)))
apDevices = wifiInfra.Install(wifiPhy, macInfra, backbone.Get(i))
# Collect all of these new devices
infraDevices = ns3.NetDeviceContainer(apDevices, staDevices)
# Add the IPv4 protocol stack to the nodes in our container
#
internet.Install(stas)
#
# Assign IPv4 addresses to the device drivers(actually to the associated
# IPv4 interfaces) we just created.
#
ipAddrs.Assign(infraDevices)
#
# Assign a new network prefix for each mobile network, according to
# the network mask initialized above
#
ipAddrs.NewNetwork()
#
# The new wireless nodes need a mobility model so we aggregate one
# to each of the nodes we just finished building.
#
subnetAlloc = ns3.ListPositionAllocator()
for j in range(infra.GetN()):
subnetAlloc.Add(ns3.Vector(0.0, j, 0.0))
mobility.PushReferenceMobilityModel(backbone.Get(i))
mobility.SetPositionAllocator(subnetAlloc)
mobility.SetMobilityModel(
"ns3::RandomDirection2dMobilityModel", "Bounds",
ns3.RectangleValue(ns3.Rectangle(-25, 25, -25, 25)), "Speed",
ns3.RandomVariableValue(ns3.ConstantVariable(30)), "Pause",
ns3.RandomVariableValue(ns3.ConstantVariable(0.4)))
mobility.Install(infra)
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # /
# #
# Application configuration #
# #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # /
# Create the OnOff application to send UDP datagrams of size
# 210 bytes at a rate of 448 Kb/s, between two nodes
print "Create Applications."
port = 9 # Discard port(RFC 863)
# Let's make sure that the user does not define too few LAN nodes
# to make this example work. We need lanNodes >= 5
assert (lanNodes >= 5)
appSource = ns3.NodeList.GetNode(11)
appSink = ns3.NodeList.GetNode(13)
remoteAddr = ns3.Ipv4Address("172.16.0.5")
onoff = ns3.OnOffHelper(
"ns3::UdpSocketFactory",
ns3.Address(ns3.InetSocketAddress(remoteAddr, port)))
onoff.SetAttribute("OnTime",
ns3.RandomVariableValue(ns3.ConstantVariable(1)))
onoff.SetAttribute("OffTime",
ns3.RandomVariableValue(ns3.ConstantVariable(0)))
apps = onoff.Install(ns3.NodeContainer(appSource))
apps.Start(ns3.Seconds(3.0))
apps.Stop(ns3.Seconds(20.0))
# Create a packet sink to receive these packets
sink = ns3.PacketSinkHelper(
"ns3::UdpSocketFactory",
ns3.InetSocketAddress(ns3.Ipv4Address.GetAny(), port))
apps = sink.Install(ns3.NodeContainer(appSink))
apps.Start(ns3.Seconds(3.0))
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # /
# #
# Tracing configuration #
# #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # /
print "Configure Tracing."
#
# Let's set up some ns-2-like ascii traces, using another helper class
#
#std.ofstream ascii
#ascii = ns3.AsciiTraceHelper();
#stream = ascii.CreateFileStream("mixed-wireless.tr");
#wifiPhy.EnableAsciiAll(stream);
#csma.EnableAsciiAll(stream);
print "(tracing not done for Python)"
# Look at nodes 11, 13 only
# WifiHelper.EnableAscii(ascii, 11, 0);
# WifiHelper.EnableAscii(ascii, 13, 0);
# Let's do a pcap trace on the backbone devices
wifiPhy.EnablePcap("mixed-wireless", backboneDevices)
# Let's additionally trace the application Sink, ifIndex 0
csma = ns3.CsmaHelper()
csma.EnablePcapAll("mixed-wireless", False)
# #ifdef ENABLE_FOR_TRACING_EXAMPLE
# Config.Connect("/NodeList/*/$MobilityModel/CourseChange",
# MakeCallback(&CourseChangeCallback))
# #endif
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# #
# Run simulation #
# #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
print "Run Simulation."
ns3.Simulator.Stop(ns3.Seconds(stopTime))
ns3.Simulator.Run()
ns3.Simulator.Destroy()
def main(argv):
#
# Allow the user to override any of the defaults and the above Bind() at
# run-time, via command-line arguments
#
cmd = ns3.CommandLine()
cmd.Parse(argv)
#
# Explicitly create the nodes required by the topology(shown above).
#
#print "Create nodes."
terminals = ns3.NodeContainer()
terminals.Create(4)
csmaSwitch = ns3.NodeContainer()
csmaSwitch.Create(1)
#print "Build Topology"
csma = ns3.CsmaHelper()
csma.SetChannelAttribute("DataRate",
ns3.DataRateValue(ns3.DataRate(5000000)))
csma.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(2)))
# Create the csma links, from each terminal to the switch
terminalDevices = ns3.NetDeviceContainer()
switchDevices = ns3.NetDeviceContainer()
for i in range(4):
link = csma.Install(
ns3.NodeContainer(ns3.NodeContainer(terminals.Get(i)), csmaSwitch))
terminalDevices.Add(link.Get(0))
switchDevices.Add(link.Get(1))
# Create the bridge netdevice, which will do the packet switching
switchNode = csmaSwitch.Get(0)
bridgeDevice = ns3.BridgeNetDevice()
switchNode.AddDevice(bridgeDevice)
for portIter in range(switchDevices.GetN()):
bridgeDevice.AddBridgePort(switchDevices.Get(portIter))
# Add internet stack to the terminals
internet = ns3.InternetStackHelper()
internet.Install(terminals)
# We've got the "hardware" in place. Now we need to add IP addresses.
#
#print "Assign IP Addresses."
ipv4 = ns3.Ipv4AddressHelper()
ipv4.SetBase(ns3.Ipv4Address("10.1.1.0"), ns3.Ipv4Mask("255.255.255.0"))
ipv4.Assign(terminalDevices)
#
# Create an OnOff application to send UDP datagrams from node zero to node 1.
#
#print "Create Applications."
port = 9 # Discard port(RFC 863)
onoff = ns3.OnOffHelper(
"ns3::UdpSocketFactory",
ns3.Address(ns3.InetSocketAddress(ns3.Ipv4Address("10.1.1.2"), port)))
onoff.SetAttribute("OnTime",
ns3.RandomVariableValue(ns3.ConstantVariable(1)))
onoff.SetAttribute("OffTime",
ns3.RandomVariableValue(ns3.ConstantVariable(0)))
app = onoff.Install(ns3.NodeContainer(terminals.Get(0)))
# Start the application
app.Start(ns3.Seconds(1.0))
app.Stop(ns3.Seconds(10.0))
# Create an optional packet sink to receive these packets
sink = ns3.PacketSinkHelper(
"ns3::UdpSocketFactory",
ns3.Address(ns3.InetSocketAddress(ns3.Ipv4Address.GetAny(), port)))
app = sink.Install(ns3.NodeContainer(terminals.Get(1)))
app.Start(ns3.Seconds(0.0))
#
# Create a similar flow from n3 to n0, starting at time 1.1 seconds
#
onoff.SetAttribute(
"Remote",
ns3.AddressValue(
ns3.InetSocketAddress(ns3.Ipv4Address("10.1.1.1"), port)))
app = onoff.Install(ns3.NodeContainer(terminals.Get(3)))
app.Start(ns3.Seconds(1.1))
app.Stop(ns3.Seconds(10.0))
app = sink.Install(ns3.NodeContainer(terminals.Get(0)))
app.Start(ns3.Seconds(0.0))
#
# Configure tracing of all enqueue, dequeue, and NetDevice receive events.
# Trace output will be sent to the file "csma-bridge.tr"
#
#print "Configure Tracing."
#ascii = ns3.AsciiTraceHelper();
#csma.EnableAsciiAll(ascii.CreateFileStream ("csma-bridge.tr"));
#
# Also configure some tcpdump traces; each interface will be traced.
# The output files will be named:
# csma-bridge.pcap-<nodeId>-<interfaceId>
# and can be read by the "tcpdump -r" command(use "-tt" option to
# display timestamps correctly)
#
csma.EnablePcapAll("csma-bridge", False)
#
# Now, do the actual simulation.
#
#print "Run Simulation."
ns3.Simulator.Run()
ns3.Simulator.Destroy()
def main(argv):
cmd = ns3.CommandLine()
cmd.NumNodesSide = None
cmd.AddValue(
"NumNodesSide",
"Grid side number of nodes (total number of nodes will be this number squared)"
)
cmd.Results = None
cmd.AddValue("Results", "Write XML results to file")
cmd.Plot = None
cmd.AddValue("Plot", "Plot the results using the matplotlib python module")
cmd.Parse(argv)
wifi = ns3.WifiHelper.Default()
wifiMac = ns3.NqosWifiMacHelper.Default()
wifiPhy = ns3.YansWifiPhyHelper.Default()
wifiChannel = ns3.YansWifiChannelHelper.Default()
wifiPhy.SetChannel(wifiChannel.Create())
ssid = ns3.Ssid("wifi-default")
wifi.SetRemoteStationManager("ns3::ArfWifiManager")
wifiMac.SetType("ns3::AdhocWifiMac", "Ssid", ns3.SsidValue(ssid))
internet = ns3.InternetStackHelper()
list_routing = ns3.Ipv4ListRoutingHelper()
olsr_routing = ns3.OlsrHelper()
static_routing = ns3.Ipv4StaticRoutingHelper()
list_routing.Add(static_routing, 0)
list_routing.Add(olsr_routing, 100)
internet.SetRoutingHelper(list_routing)
ipv4Addresses = ns3.Ipv4AddressHelper()
ipv4Addresses.SetBase(ns3.Ipv4Address("10.0.0.0"),
ns3.Ipv4Mask("255.255.255.0"))
port = 9 # Discard port(RFC 863)
onOffHelper = ns3.OnOffHelper(
"ns3::UdpSocketFactory",
ns3.Address(ns3.InetSocketAddress(ns3.Ipv4Address("10.0.0.1"), port)))
onOffHelper.SetAttribute("DataRate",
ns3.DataRateValue(ns3.DataRate("100kbps")))
onOffHelper.SetAttribute("OnTime",
ns3.RandomVariableValue(ns3.ConstantVariable(1)))
onOffHelper.SetAttribute("OffTime",
ns3.RandomVariableValue(ns3.ConstantVariable(0)))
addresses = []
nodes = []
if cmd.NumNodesSide is None:
num_nodes_side = NUM_NODES_SIDE
else:
num_nodes_side = int(cmd.NumNodesSide)
for xi in range(num_nodes_side):
for yi in range(num_nodes_side):
node = ns3.Node()
nodes.append(node)
internet.Install(ns3.NodeContainer(node))
mobility = ns3.ConstantPositionMobilityModel()
mobility.SetPosition(ns3.Vector(xi * DISTANCE, yi * DISTANCE, 0))
node.AggregateObject(mobility)
devices = wifi.Install(wifiPhy, wifiMac, node)
ipv4_interfaces = ipv4Addresses.Assign(devices)
addresses.append(ipv4_interfaces.GetAddress(0))
for i, node in enumerate(nodes):
destaddr = addresses[(len(addresses) - 1 - i) % len(addresses)]
#print i, destaddr
onOffHelper.SetAttribute(
"Remote", ns3.AddressValue(ns3.InetSocketAddress(destaddr, port)))
app = onOffHelper.Install(ns3.NodeContainer(node))
app.Start(ns3.Seconds(ns3.UniformVariable(20, 30).GetValue()))
#internet.EnablePcapAll("wifi-olsr")
flowmon_helper = ns3.FlowMonitorHelper()
#flowmon_helper.SetMonitorAttribute("StartTime", ns3.TimeValue(ns3.Seconds(31)))
monitor = flowmon_helper.InstallAll()
monitor.SetAttribute("DelayBinWidth", ns3.DoubleValue(0.001))
monitor.SetAttribute("JitterBinWidth", ns3.DoubleValue(0.001))
monitor.SetAttribute("PacketSizeBinWidth", ns3.DoubleValue(20))
ns3.Simulator.Stop(ns3.Seconds(44.0))
ns3.Simulator.Run()
def print_stats(os, st):
print >> os, " Tx Bytes: ", st.txBytes
print >> os, " Rx Bytes: ", st.rxBytes
print >> os, " Tx Packets: ", st.txPackets
print >> os, " Rx Packets: ", st.rxPackets
print >> os, " Lost Packets: ", st.lostPackets
if st.rxPackets > 0:
print >> os, " Mean{Delay}: ", (st.delaySum.GetSeconds() /
st.rxPackets)
print >> os, " Mean{Jitter}: ", (st.jitterSum.GetSeconds() /
(st.rxPackets - 1))
print >> os, " Mean{Hop Count}: ", float(
st.timesForwarded) / st.rxPackets + 1
if 0:
print >> os, "Delay Histogram"
for i in range(st.delayHistogram.GetNBins()):
print >> os, " ",i,"(", st.delayHistogram.GetBinStart (i), "-", \
st.delayHistogram.GetBinEnd (i), "): ", st.delayHistogram.GetBinCount (i)
print >> os, "Jitter Histogram"
for i in range(st.jitterHistogram.GetNBins()):
print >> os, " ",i,"(", st.jitterHistogram.GetBinStart (i), "-", \
st.jitterHistogram.GetBinEnd (i), "): ", st.jitterHistogram.GetBinCount (i)
print >> os, "PacketSize Histogram"
for i in range(st.packetSizeHistogram.GetNBins()):
print >> os, " ",i,"(", st.packetSizeHistogram.GetBinStart (i), "-", \
st.packetSizeHistogram.GetBinEnd (i), "): ", st.packetSizeHistogram.GetBinCount (i)
for reason, drops in enumerate(st.packetsDropped):
print " Packets dropped by reason %i: %i" % (reason, drops)
#for reason, drops in enumerate(st.bytesDropped):
# print "Bytes dropped by reason %i: %i" % (reason, drops)
monitor.CheckForLostPackets()
classifier = flowmon_helper.GetClassifier()
if cmd.Results is None:
for flow_id, flow_stats in monitor.GetFlowStats():
t = classifier.FindFlow(flow_id)
proto = {6: 'TCP', 17: 'UDP'}[t.protocol]
print "FlowID: %i (%s %s/%s --> %s/%i)" % \
(flow_id, proto, t.sourceAddress, t.sourcePort, t.destinationAddress, t.destinationPort)
print_stats(sys.stdout, flow_stats)
else:
print monitor.SerializeToXmlFile(cmd.Results, True, True)
if cmd.Plot is not None:
import pylab
delays = []
for flow_id, flow_stats in monitor.GetFlowStats():
tupl = classifier.FindFlow(flow_id)
if tupl.protocol == 17 and tupl.sourcePort == 698:
continue
delays.append(flow_stats.delaySum.GetSeconds() /
flow_stats.rxPackets)
pylab.hist(delays, 20)
pylab.xlabel("Delay (s)")
pylab.ylabel("Number of Flows")
pylab.show()
return 0
def main(argv):
cmd = ns3.CommandLine()
cmd.AddValue("deviceName_emu_0", "device name", emuDevice_emu_0)
cmd.AddValue("deviceName_emu_1", "device name", emuDevice_emu_1)
cmd.AddValue("deviceName_emu_2", "device name", emuDevice_emu_2)
cmd.AddValue("mode_tap_0", "Mode Setting of TapBridge", mode_tap_0)
cmd.AddValue("tapName_tap_0", "Name of the OS tap device", tapName_tap_0)
cmd.AddValue("mode_tap_1", "Mode Setting of TapBridge", mode_tap_1)
cmd.AddValue("tapName_tap_1", "Name of the OS tap device", tapName_tap_1)
cmd.AddValue("mode_tap_2", "Mode Setting of TapBridge", mode_tap_2)
cmd.AddValue("tapName_tap_2", "Name of the OS tap device", tapName_tap_2)
cmd.AddValue("deviceName_emu_0", "device name", emuDevice_emu_0)
cmd.AddValue("deviceName_emu_1", "device name", emuDevice_emu_1)
cmd.AddValue("deviceName_emu_2", "device name", emuDevice_emu_2)
cmd.AddValue("mode_tap_0", "Mode Setting of TapBridge", mode_tap_0)
cmd.AddValue("tapName_tap_0", "Name of the OS tap device", tapName_tap_0)
cmd.AddValue("mode_tap_1", "Mode Setting of TapBridge", mode_tap_1)
cmd.AddValue("tapName_tap_1", "Name of the OS tap device", tapName_tap_1)
cmd.AddValue("mode_tap_2", "Mode Setting of TapBridge", mode_tap_2)
cmd.AddValue("tapName_tap_2", "Name of the OS tap device", tapName_tap_2)
cmd.Parse (argv)
# Configuration.
GlobalValue::Bind ("SimulatorImplementationType", StringValue ("ns3::RealtimeSimulatorImpl"));
GlobalValue::Bind ("ChecksumEnabled", BooleanValue (true));
ns3.GlobalValue.Bind ("SimulatorImplementationType", ns3.StringValue ("ns3::RealtimeSimulatorImpl"));
ns3.GlobalValue.Bind ("ChecksumEnabled", ns3.BooleanValue (true));
# Build nodes
term_0 = ns3.NodeContainer()
term_0.Create (10)
term_1 = ns3.NodeContainer()
term_1.Create (10)
term_2 = ns3.NodeContainer()
term_2.Create (10)
bridge_0 = ns3.NodeContainer()
bridge_0.Create (1)
ap_0 = ns3.NodeContainer()
ap_0.Create (1)
station_0 = ns3.NodeContainer()
station_0.Create (1)
station_1 = ns3.NodeContainer()
station_1.Create (1)
station_2 = ns3.NodeContainer()
station_2.Create (1)
station_3 = ns3.NodeContainer()
station_3.Create (1)
station_4 = ns3.NodeContainer()
station_4.Create (1)
station_5 = ns3.NodeContainer()
station_5.Create (1)
station_6 = ns3.NodeContainer()
station_6.Create (1)
term_3 = ns3.NodeContainer()
term_3.Create (1)
term_4 = ns3.NodeContainer()
term_4.Create (1)
term_5 = ns3.NodeContainer()
term_5.Create (1)
term_6 = ns3.NodeContainer()
term_6.Create (1)
bridge_1 = ns3.NodeContainer()
bridge_1.Create (1)
bridge_2 = ns3.NodeContainer()
bridge_2.Create (1)
emu_0 = ns3.NodeContainer()
emu_0.Create (1)
emu_1 = ns3.NodeContainer()
emu_1.Create (1)
term_7 = ns3.NodeContainer()
term_7.Create (1)
term_8 = ns3.NodeContainer()
term_8.Create (1)
term_9 = ns3.NodeContainer()
term_9.Create (1)
term_10 = ns3.NodeContainer()
term_10.Create (1)
term_11 = ns3.NodeContainer()
term_11.Create (1)
term_12 = ns3.NodeContainer()
term_12.Create (10)
term_13 = ns3.NodeContainer()
term_13.Create (10)
term_14 = ns3.NodeContainer()
term_14.Create (10)
bridge_3 = ns3.NodeContainer()
bridge_3.Create (1)
term_15 = ns3.NodeContainer()
term_15.Create (1)
term_16 = ns3.NodeContainer()
term_16.Create (1)
term_17 = ns3.NodeContainer()
term_17.Create (1)
term_18 = ns3.NodeContainer()
term_18.Create (1)
term_19 = ns3.NodeContainer()
term_19.Create (1)
term_20 = ns3.NodeContainer()
term_20.Create (1)
term_21 = ns3.NodeContainer()
term_21.Create (1)
term_22 = ns3.NodeContainer()
term_22.Create (1)
term_23 = ns3.NodeContainer()
term_23.Create (1)
term_24 = ns3.NodeContainer()
term_24.Create (1)
bridge_4 = ns3.NodeContainer()
bridge_4.Create (1)
ap_1 = ns3.NodeContainer()
ap_1.Create (1)
station_7 = ns3.NodeContainer()
station_7.Create (1)
station_8 = ns3.NodeContainer()
station_8.Create (1)
station_9 = ns3.NodeContainer()
station_9.Create (1)
station_10 = ns3.NodeContainer()
station_10.Create (1)
station_11 = ns3.NodeContainer()
station_11.Create (1)
station_12 = ns3.NodeContainer()
station_12.Create (1)
station_13 = ns3.NodeContainer()
station_13.Create (1)
emu_2 = ns3.NodeContainer()
emu_2.Create (1)
tap_0 = ns3.NodeContainer()
tap_0.Create (1)
tap_1 = ns3.NodeContainer()
tap_1.Create (1)
tap_2 = ns3.NodeContainer()
tap_2.Create (1)
term_0 = ns3.NodeContainer()
term_0.Create (10)
term_1 = ns3.NodeContainer()
term_1.Create (10)
term_2 = ns3.NodeContainer()
term_2.Create (10)
bridge_0 = ns3.NodeContainer()
bridge_0.Create (1)
router_0 = ns3.NodeContainer()
router_0.Create (1)
ap_0 = ns3.NodeContainer()
ap_0.Create (1)
station_0 = ns3.NodeContainer()
station_0.Create (1)
station_1 = ns3.NodeContainer()
station_1.Create (1)
station_2 = ns3.NodeContainer()
station_2.Create (1)
station_3 = ns3.NodeContainer()
station_3.Create (1)
station_4 = ns3.NodeContainer()
station_4.Create (1)
station_5 = ns3.NodeContainer()
station_5.Create (1)
station_6 = ns3.NodeContainer()
station_6.Create (1)
term_3 = ns3.NodeContainer()
term_3.Create (1)
term_4 = ns3.NodeContainer()
term_4.Create (1)
term_5 = ns3.NodeContainer()
term_5.Create (1)
term_6 = ns3.NodeContainer()
term_6.Create (1)
bridge_1 = ns3.NodeContainer()
bridge_1.Create (1)
bridge_2 = ns3.NodeContainer()
bridge_2.Create (1)
emu_0 = ns3.NodeContainer()
emu_0.Create (1)
emu_1 = ns3.NodeContainer()
emu_1.Create (1)
term_7 = ns3.NodeContainer()
term_7.Create (1)
term_8 = ns3.NodeContainer()
term_8.Create (1)
term_9 = ns3.NodeContainer()
term_9.Create (1)
term_10 = ns3.NodeContainer()
term_10.Create (1)
term_11 = ns3.NodeContainer()
term_11.Create (1)
term_12 = ns3.NodeContainer()
term_12.Create (10)
term_13 = ns3.NodeContainer()
term_13.Create (10)
term_14 = ns3.NodeContainer()
term_14.Create (10)
bridge_3 = ns3.NodeContainer()
bridge_3.Create (1)
term_15 = ns3.NodeContainer()
term_15.Create (1)
term_16 = ns3.NodeContainer()
term_16.Create (1)
term_17 = ns3.NodeContainer()
term_17.Create (1)
term_18 = ns3.NodeContainer()
term_18.Create (1)
term_19 = ns3.NodeContainer()
term_19.Create (1)
term_20 = ns3.NodeContainer()
term_20.Create (1)
term_21 = ns3.NodeContainer()
term_21.Create (1)
term_22 = ns3.NodeContainer()
term_22.Create (1)
term_23 = ns3.NodeContainer()
term_23.Create (1)
term_24 = ns3.NodeContainer()
term_24.Create (1)
bridge_4 = ns3.NodeContainer()
bridge_4.Create (1)
ap_1 = ns3.NodeContainer()
ap_1.Create (1)
station_7 = ns3.NodeContainer()
station_7.Create (1)
station_8 = ns3.NodeContainer()
station_8.Create (1)
station_9 = ns3.NodeContainer()
station_9.Create (1)
station_10 = ns3.NodeContainer()
station_10.Create (1)
station_11 = ns3.NodeContainer()
station_11.Create (1)
station_12 = ns3.NodeContainer()
station_12.Create (1)
station_13 = ns3.NodeContainer()
station_13.Create (1)
emu_2 = ns3.NodeContainer()
emu_2.Create (1)
tap_0 = ns3.NodeContainer()
tap_0.Create (1)
tap_1 = ns3.NodeContainer()
tap_1.Create (1)
tap_2 = ns3.NodeContainer()
tap_2.Create (1)
router_2 = ns3.NodeContainer()
router_2.Create (1)
term_50 = ns3.NodeContainer()
term_50.Create (1)
term_51 = ns3.NodeContainer()
term_51.Create (1)
# Build link.
csma_bridge_0 = ns3.CsmaHelper();
csma_bridge_0.SetChannelAttribute("DataRate", ns3.DataRateValue (ns3.DataRate(100000000)))
csma_bridge_0.SetChannelAttribute("Delay", ns3.TimeValue (ns3.MilliSeconds(10000)))
wifiPhy_ap_0 = ns3.YansWifiPhyHelper.Default()
wifiChannel_ap_0 = ns3.YansWifiChannelHelper.Default()
wifiPhy_ap_0.SetChannel(wifiChannel_ap_0.Create())
csma_bridge_1 = ns3.CsmaHelper();
csma_bridge_1.SetChannelAttribute("DataRate", ns3.DataRateValue (ns3.DataRate(100000000)))
csma_bridge_1.SetChannelAttribute("Delay", ns3.TimeValue (ns3.MilliSeconds(10000)))
csma_bridge_2 = ns3.CsmaHelper();
csma_bridge_2.SetChannelAttribute("DataRate", ns3.DataRateValue (ns3.DataRate(100000000)))
csma_bridge_2.SetChannelAttribute("Delay", ns3.TimeValue (ns3.MilliSeconds(10000)))
csma_hub_0 = ns3.CsmaHelper()
csma_hub_0.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
csma_hub_0.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
emu_0 = ns3.EmuHelper()
emu_0.SetAttribute ("DeviceName", StringValue (emuDevice_emu_0))
emu_1 = ns3.EmuHelper()
emu_1.SetAttribute ("DeviceName", StringValue (emuDevice_emu_1))
csma_hub_1 = ns3.CsmaHelper()
csma_hub_1.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
csma_hub_1.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
csma_hub_2 = ns3.CsmaHelper()
csma_hub_2.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
csma_hub_2.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
csma_bridge_3 = ns3.CsmaHelper();
csma_bridge_3.SetChannelAttribute("DataRate", ns3.DataRateValue (ns3.DataRate(100000000)))
csma_bridge_3.SetChannelAttribute("Delay", ns3.TimeValue (ns3.MilliSeconds(10000)))
csma_bridge_4 = ns3.CsmaHelper();
csma_bridge_4.SetChannelAttribute("DataRate", ns3.DataRateValue (ns3.DataRate(100000000)))
csma_bridge_4.SetChannelAttribute("Delay", ns3.TimeValue (ns3.MilliSeconds(10000)))
wifiPhy_ap_1 = ns3.YansWifiPhyHelper.Default()
wifiChannel_ap_1 = ns3.YansWifiChannelHelper.Default()
wifiPhy_ap_1.SetChannel(wifiChannel_ap_1.Create())
emu_2 = ns3.EmuHelper()
emu_2.SetAttribute ("DeviceName", StringValue (emuDevice_emu_2))
csma_hub_3 = ns3.CsmaHelper()
csma_hub_3.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
csma_hub_3.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
csma_tap_0 = ns3.CsmaHelper()
csma_tap_0.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)));
csma_tap_0.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)));
csma_hub_4 = ns3.CsmaHelper()
csma_hub_4.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
csma_hub_4.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
csma_tap_1 = ns3.CsmaHelper()
csma_tap_1.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)));
csma_tap_1.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)));
csma_tap_2 = ns3.CsmaHelper()
csma_tap_2.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)));
csma_tap_2.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)));
csma_hub_5 = ns3.CsmaHelper()
csma_hub_5.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
csma_hub_5.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
csma_hub_6 = ns3.CsmaHelper()
csma_hub_6.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
csma_hub_6.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
csma_bridge_0 = ns3.CsmaHelper();
csma_bridge_0.SetChannelAttribute("DataRate", ns3.DataRateValue (ns3.DataRate(100000000)))
csma_bridge_0.SetChannelAttribute("Delay", ns3.TimeValue (ns3.MilliSeconds(10000)))
wifiPhy_ap_0 = ns3.YansWifiPhyHelper.Default()
wifiChannel_ap_0 = ns3.YansWifiChannelHelper.Default()
wifiPhy_ap_0.SetChannel(wifiChannel_ap_0.Create())
p2p_p2p_0 = ns3.PointToPointHelper()
p2p_p2p_0.SetDeviceAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
p2p_p2p_0.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
csma_bridge_1 = ns3.CsmaHelper();
csma_bridge_1.SetChannelAttribute("DataRate", ns3.DataRateValue (ns3.DataRate(100000000)))
csma_bridge_1.SetChannelAttribute("Delay", ns3.TimeValue (ns3.MilliSeconds(10000)))
csma_bridge_2 = ns3.CsmaHelper();
csma_bridge_2.SetChannelAttribute("DataRate", ns3.DataRateValue (ns3.DataRate(100000000)))
csma_bridge_2.SetChannelAttribute("Delay", ns3.TimeValue (ns3.MilliSeconds(10000)))
csma_hub_0 = ns3.CsmaHelper()
csma_hub_0.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
csma_hub_0.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
emu_0 = ns3.EmuHelper()
emu_0.SetAttribute ("DeviceName", StringValue (emuDevice_emu_0))
emu_1 = ns3.EmuHelper()
emu_1.SetAttribute ("DeviceName", StringValue (emuDevice_emu_1))
csma_hub_1 = ns3.CsmaHelper()
csma_hub_1.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
csma_hub_1.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
csma_hub_2 = ns3.CsmaHelper()
csma_hub_2.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
csma_hub_2.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
csma_bridge_3 = ns3.CsmaHelper();
csma_bridge_3.SetChannelAttribute("DataRate", ns3.DataRateValue (ns3.DataRate(100000000)))
csma_bridge_3.SetChannelAttribute("Delay", ns3.TimeValue (ns3.MilliSeconds(10000)))
csma_bridge_4 = ns3.CsmaHelper();
csma_bridge_4.SetChannelAttribute("DataRate", ns3.DataRateValue (ns3.DataRate(100000000)))
csma_bridge_4.SetChannelAttribute("Delay", ns3.TimeValue (ns3.MilliSeconds(10000)))
wifiPhy_ap_1 = ns3.YansWifiPhyHelper.Default()
wifiChannel_ap_1 = ns3.YansWifiChannelHelper.Default()
wifiPhy_ap_1.SetChannel(wifiChannel_ap_1.Create())
p2p_p2p_1 = ns3.PointToPointHelper()
p2p_p2p_1.SetDeviceAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
p2p_p2p_1.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
emu_2 = ns3.EmuHelper()
emu_2.SetAttribute ("DeviceName", StringValue (emuDevice_emu_2))
csma_hub_3 = ns3.CsmaHelper()
csma_hub_3.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
csma_hub_3.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
csma_tap_0 = ns3.CsmaHelper()
csma_tap_0.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)));
csma_tap_0.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)));
csma_hub_4 = ns3.CsmaHelper()
csma_hub_4.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
csma_hub_4.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
csma_tap_1 = ns3.CsmaHelper()
csma_tap_1.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)));
csma_tap_1.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)));
csma_tap_2 = ns3.CsmaHelper()
csma_tap_2.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)));
csma_tap_2.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)));
csma_hub_5 = ns3.CsmaHelper()
csma_hub_5.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
csma_hub_5.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
csma_hub_6 = ns3.CsmaHelper()
csma_hub_6.SetChannelAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
csma_hub_6.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
p2p_p2p_4 = ns3.PointToPointHelper()
p2p_p2p_4.SetDeviceAttribute("DataRate", ns3.DataRateValue(ns3.DataRate(100000000)))
p2p_p2p_4.SetChannelAttribute("Delay", ns3.TimeValue(ns3.MilliSeconds(10000)))
# Build link net device container.
all_bridge_0 = ns3.NodeContainer()
all_bridge_0.Add (term_0)
all_bridge_0.Add (term_1)
all_bridge_0.Add (term_2)
terminalDevices_bridge_0 = ns3.NetDeviceContainer()
BridgeDevices_bridge_0 = ns3.NetDeviceContainer()
for i in range(3):
link = csma_bridge_0.Install(NodeContainer(all_bridge_0.Get(i), bridge_0))
terminalDevices_bridge_0.Add(link.Get(0))
BridgeDevices_bridge_0.Add(link.Get(1))
bridge_bridge_0 = ns3.BridgeHelper
bridge_bridge_0.Install(bridge_0.Get(0), BridgeDevices_bridge_0)
ndc_bridge_0 = terminalDevices_bridge_0
all_ap_0 = ns3.NodeContainer()
ndc_ap_0 = ns3.NetDeviceContainer()
ssid_ap_0 = ns3.Ssid("wifi-default-0")
wifi_ap_0 = ns3.WifiHelper.Default()
wifiMac_ap_0 = ns3.NqosWifiMacHelper.Default()
wifi_ap_0.SetRemoteStationManager("ns3::ArfWifiManager")
wifiMac_ap_0.SetType ("ns3::ApWifiMac",
"Ssid", ns3.SsidValue(ssid_ap_0),
"BeaconGeneration", ns3.BooleanValue(True),
"BeaconInterval", ns3.TimeValue(ns3.Seconds(2.5)))
ndc_ap_0.Add(wifi_ap_0.Install(wifiPhy_ap_0, wifiMac_ap_0, ap_0))
wifiMac_ap_0.SetType("ns3::StaWifiMac",
"Ssid", ns3.SsidValue(ssid_ap_0),
"ActiveProbing", ns3.BooleanValue(False))
ndc_ap_0.Add(wifi_ap_0.Install(wifiPhy_ap_0, wifiMac_ap_0, all_ap_0 ))
mobility_ap_0 = ns3.MobilityHelper()
mobility_ap_0.SetMobilityModel ("ns3::ConstantPositionMobilityModel")
mobility_ap_0.Install(ap_0)
mobility_ap_0.Install(all_ap_0)
all_bridge_1 = ns3.NodeContainer()
all_bridge_1.Add (term_6)
all_bridge_1.Add (term_4)
all_bridge_1.Add (term_5)
all_bridge_1.Add (term_3)
all_bridge_1.Add (term_11)
all_bridge_1.Add (term_10)
all_bridge_1.Add (term_9)
all_bridge_1.Add (term_8)
terminalDevices_bridge_1 = ns3.NetDeviceContainer()
BridgeDevices_bridge_1 = ns3.NetDeviceContainer()
for i in range(8):
link = csma_bridge_1.Install(NodeContainer(all_bridge_1.Get(i), bridge_1))
terminalDevices_bridge_1.Add(link.Get(0))
BridgeDevices_bridge_1.Add(link.Get(1))
bridge_bridge_1 = ns3.BridgeHelper
bridge_bridge_1.Install(bridge_1.Get(0), BridgeDevices_bridge_1)
ndc_bridge_1 = terminalDevices_bridge_1
all_bridge_2 = ns3.NodeContainer()
terminalDevices_bridge_2 = ns3.NetDeviceContainer()
BridgeDevices_bridge_2 = ns3.NetDeviceContainer()
for i in range(0):
link = csma_bridge_2.Install(NodeContainer(all_bridge_2.Get(i), bridge_2))
terminalDevices_bridge_2.Add(link.Get(0))
BridgeDevices_bridge_2.Add(link.Get(1))
bridge_bridge_2 = ns3.BridgeHelper
bridge_bridge_2.Install(bridge_2.Get(0), BridgeDevices_bridge_2)
ndc_bridge_2 = terminalDevices_bridge_2
all_hub_0 = ns3.NodeContainer()
all_hub_0.Add (bridge_1)
all_hub_0.Add (bridge_2)
ndc_hub_0 = csma_hub_0.Install(all_hub_0)
all_emu_0 = ns3.NodeContainer()
all_emu_0.Add (emu_0)
ndc_emu_0 = emu_0.Install (all_emu_0)
all_emu_1 = ns3.NodeContainer()
all_emu_1.Add (emu_1)
ndc_emu_1 = emu_1.Install (all_emu_1)
all_hub_1 = ns3.NodeContainer()
all_hub_1.Add (bridge_2)
all_hub_1.Add (emu_0)
ndc_hub_1 = csma_hub_1.Install(all_hub_1)
all_hub_2 = ns3.NodeContainer()
all_hub_2.Add (bridge_2)
all_hub_2.Add (emu_1)
ndc_hub_2 = csma_hub_2.Install(all_hub_2)
all_bridge_3 = ns3.NodeContainer()
all_bridge_3.Add (term_12)
all_bridge_3.Add (term_13)
all_bridge_3.Add (term_14)
terminalDevices_bridge_3 = ns3.NetDeviceContainer()
BridgeDevices_bridge_3 = ns3.NetDeviceContainer()
for i in range(3):
link = csma_bridge_3.Install(NodeContainer(all_bridge_3.Get(i), bridge_3))
terminalDevices_bridge_3.Add(link.Get(0))
BridgeDevices_bridge_3.Add(link.Get(1))
bridge_bridge_3 = ns3.BridgeHelper
bridge_bridge_3.Install(bridge_3.Get(0), BridgeDevices_bridge_3)
ndc_bridge_3 = terminalDevices_bridge_3
all_bridge_4 = ns3.NodeContainer()
all_bridge_4.Add (term_21)
all_bridge_4.Add (term_22)
all_bridge_4.Add (term_20)
all_bridge_4.Add (term_7)
all_bridge_4.Add (term_24)
all_bridge_4.Add (term_23)
all_bridge_4.Add (term_15)
all_bridge_4.Add (term_19)
all_bridge_4.Add (term_16)
all_bridge_4.Add (term_17)
all_bridge_4.Add (term_18)
all_bridge_4.Add (term_51)
all_bridge_4.Add (term_50)
terminalDevices_bridge_4 = ns3.NetDeviceContainer()
BridgeDevices_bridge_4 = ns3.NetDeviceContainer()
for i in range(13):
link = csma_bridge_4.Install(NodeContainer(all_bridge_4.Get(i), bridge_4))
terminalDevices_bridge_4.Add(link.Get(0))
BridgeDevices_bridge_4.Add(link.Get(1))
bridge_bridge_4 = ns3.BridgeHelper
bridge_bridge_4.Install(bridge_4.Get(0), BridgeDevices_bridge_4)
ndc_bridge_4 = terminalDevices_bridge_4
all_ap_1 = ns3.NodeContainer()
ndc_ap_1 = ns3.NetDeviceContainer()
ssid_ap_1 = ns3.Ssid("wifi-default-1")
wifi_ap_1 = ns3.WifiHelper.Default()
wifiMac_ap_1 = ns3.NqosWifiMacHelper.Default()
wifi_ap_1.SetRemoteStationManager("ns3::ArfWifiManager")
wifiMac_ap_1.SetType ("ns3::ApWifiMac",
"Ssid", ns3.SsidValue(ssid_ap_1),
"BeaconGeneration", ns3.BooleanValue(True),
"BeaconInterval", ns3.TimeValue(ns3.Seconds(2.5)))
ndc_ap_1.Add(wifi_ap_1.Install(wifiPhy_ap_1, wifiMac_ap_1, ap_1))
wifiMac_ap_1.SetType("ns3::StaWifiMac",
"Ssid", ns3.SsidValue(ssid_ap_1),
"ActiveProbing", ns3.BooleanValue(False))
ndc_ap_1.Add(wifi_ap_1.Install(wifiPhy_ap_1, wifiMac_ap_1, all_ap_1 ))
mobility_ap_1 = ns3.MobilityHelper()
mobility_ap_1.SetMobilityModel ("ns3::ConstantPositionMobilityModel")
mobility_ap_1.Install(ap_1)
mobility_ap_1.Install(all_ap_1)
all_emu_2 = ns3.NodeContainer()
all_emu_2.Add (emu_2)
ndc_emu_2 = emu_2.Install (all_emu_2)
all_hub_3 = ns3.NodeContainer()
all_hub_3.Add (bridge_2)
all_hub_3.Add (emu_2)
ndc_hub_3 = csma_hub_3.Install(all_hub_3)
NodeContainer all_tap_0;
all_tap_0.Add (tap_0);
ndc_tap_0 = csma_tap_0.Install(all_tap_0);
all_hub_4 = ns3.NodeContainer()
all_hub_4.Add (emu_2)
all_hub_4.Add (tap_0)
ndc_hub_4 = csma_hub_4.Install(all_hub_4)
NodeContainer all_tap_1;
all_tap_1.Add (tap_1);
ndc_tap_1 = csma_tap_1.Install(all_tap_1);
NodeContainer all_tap_2;
all_tap_2.Add (tap_2);
ndc_tap_2 = csma_tap_2.Install(all_tap_2);
all_hub_5 = ns3.NodeContainer()
all_hub_5.Add (emu_0)
all_hub_5.Add (tap_2)
ndc_hub_5 = csma_hub_5.Install(all_hub_5)
all_hub_6 = ns3.NodeContainer()
all_hub_6.Add (emu_1)
all_hub_6.Add (tap_1)
ndc_hub_6 = csma_hub_6.Install(all_hub_6)
all_bridge_6 = ns3.NodeContainer()
all_bridge_6.Add (router_0)
all_bridge_6.Add (term_0)
all_bridge_6.Add (term_1)
all_bridge_6.Add (term_2)
terminalDevices_bridge_0 = ns3.NetDeviceContainer()
BridgeDevices_bridge_0 = ns3.NetDeviceContainer()
for i in range(4):
link = csma_bridge_0.Install(NodeContainer(all_bridge_6.Get(i), bridge_0))
terminalDevices_bridge_0.Add(link.Get(0))
BridgeDevices_bridge_0.Add(link.Get(1))
bridge_bridge_0 = ns3.BridgeHelper
bridge_bridge_0.Install(bridge_0.Get(0), BridgeDevices_bridge_0)
ndc_bridge_0 = terminalDevices_bridge_0
all_ap_2 = ns3.NodeContainer()
ndc_ap_2 = ns3.NetDeviceContainer()
ssid_ap_0 = ns3.Ssid("wifi-default-2")
wifi_ap_0 = ns3.WifiHelper.Default()
wifiMac_ap_0 = ns3.NqosWifiMacHelper.Default()
wifi_ap_0.SetRemoteStationManager("ns3::ArfWifiManager")
wifiMac_ap_0.SetType ("ns3::ApWifiMac",
"Ssid", ns3.SsidValue(ssid_ap_0),
"BeaconGeneration", ns3.BooleanValue(True),
"BeaconInterval", ns3.TimeValue(ns3.Seconds(2.5)))
ndc_ap_2.Add(wifi_ap_0.Install(wifiPhy_ap_0, wifiMac_ap_0, ap_0))
wifiMac_ap_0.SetType("ns3::StaWifiMac",
"Ssid", ns3.SsidValue(ssid_ap_0),
"ActiveProbing", ns3.BooleanValue(False))
ndc_ap_2.Add(wifi_ap_0.Install(wifiPhy_ap_0, wifiMac_ap_0, all_ap_2 ))
mobility_ap_0 = ns3.MobilityHelper()
mobility_ap_0.SetMobilityModel ("ns3::ConstantPositionMobilityModel")
mobility_ap_0.Install(ap_0)
mobility_ap_0.Install(all_ap_2)
all_p2p_2 = ns3.NodeContainer()
all_p2p_2.Add (router_0)
ndc_p2p_2 = p2p_p2p_0.Install(all_p2p_2)
all_bridge_7 = ns3.NodeContainer()
all_bridge_7.Add (term_6)
all_bridge_7.Add (term_4)
all_bridge_7.Add (term_5)
all_bridge_7.Add (term_3)
all_bridge_7.Add (term_11)
all_bridge_7.Add (term_10)
all_bridge_7.Add (term_9)
all_bridge_7.Add (term_8)
terminalDevices_bridge_1 = ns3.NetDeviceContainer()
BridgeDevices_bridge_1 = ns3.NetDeviceContainer()
for i in range(8):
link = csma_bridge_1.Install(NodeContainer(all_bridge_7.Get(i), bridge_1))
terminalDevices_bridge_1.Add(link.Get(0))
BridgeDevices_bridge_1.Add(link.Get(1))
bridge_bridge_1 = ns3.BridgeHelper
bridge_bridge_1.Install(bridge_1.Get(0), BridgeDevices_bridge_1)
ndc_bridge_1 = terminalDevices_bridge_1
all_bridge_8 = ns3.NodeContainer()
all_bridge_8.Add (router_0)
terminalDevices_bridge_2 = ns3.NetDeviceContainer()
BridgeDevices_bridge_2 = ns3.NetDeviceContainer()
for i in range(1):
link = csma_bridge_2.Install(NodeContainer(all_bridge_8.Get(i), bridge_2))
terminalDevices_bridge_2.Add(link.Get(0))
BridgeDevices_bridge_2.Add(link.Get(1))
bridge_bridge_2 = ns3.BridgeHelper
bridge_bridge_2.Install(bridge_2.Get(0), BridgeDevices_bridge_2)
ndc_bridge_2 = terminalDevices_bridge_2
all_hub_7 = ns3.NodeContainer()
all_hub_7.Add (bridge_1)
all_hub_7.Add (bridge_2)
ndc_hub_7 = csma_hub_0.Install(all_hub_7)
all_emu_3 = ns3.NodeContainer()
all_emu_3.Add (emu_0)
all_emu_3.Add (emu_0)
ndc_emu_3 = emu_0.Install (all_emu_3)
all_emu_4 = ns3.NodeContainer()
all_emu_4.Add (emu_1)
all_emu_4.Add (emu_1)
ndc_emu_4 = emu_1.Install (all_emu_4)
all_hub_8 = ns3.NodeContainer()
all_hub_8.Add (bridge_2)
all_hub_8.Add (emu_0)
ndc_hub_8 = csma_hub_1.Install(all_hub_8)
all_hub_9 = ns3.NodeContainer()
all_hub_9.Add (bridge_2)
all_hub_9.Add (emu_1)
ndc_hub_9 = csma_hub_2.Install(all_hub_9)
all_bridge_9 = ns3.NodeContainer()
all_bridge_9.Add (router_0)
all_bridge_9.Add (term_12)
all_bridge_9.Add (term_13)
all_bridge_9.Add (term_14)
terminalDevices_bridge_3 = ns3.NetDeviceContainer()
BridgeDevices_bridge_3 = ns3.NetDeviceContainer()
for i in range(4):
link = csma_bridge_3.Install(NodeContainer(all_bridge_9.Get(i), bridge_3))
terminalDevices_bridge_3.Add(link.Get(0))
BridgeDevices_bridge_3.Add(link.Get(1))
bridge_bridge_3 = ns3.BridgeHelper
bridge_bridge_3.Install(bridge_3.Get(0), BridgeDevices_bridge_3)
ndc_bridge_3 = terminalDevices_bridge_3
all_bridge_10 = ns3.NodeContainer()
all_bridge_10.Add (router_0)
all_bridge_10.Add (term_21)
all_bridge_10.Add (term_22)
all_bridge_10.Add (term_20)
all_bridge_10.Add (term_7)
all_bridge_10.Add (term_24)
all_bridge_10.Add (term_23)
all_bridge_10.Add (term_15)
all_bridge_10.Add (term_19)
all_bridge_10.Add (term_16)
all_bridge_10.Add (term_17)
all_bridge_10.Add (term_18)
terminalDevices_bridge_4 = ns3.NetDeviceContainer()
BridgeDevices_bridge_4 = ns3.NetDeviceContainer()
for i in range(12):
link = csma_bridge_4.Install(NodeContainer(all_bridge_10.Get(i), bridge_4))
terminalDevices_bridge_4.Add(link.Get(0))
BridgeDevices_bridge_4.Add(link.Get(1))
bridge_bridge_4 = ns3.BridgeHelper
bridge_bridge_4.Install(bridge_4.Get(0), BridgeDevices_bridge_4)
ndc_bridge_4 = terminalDevices_bridge_4
all_ap_3 = ns3.NodeContainer()
ndc_ap_3 = ns3.NetDeviceContainer()
ssid_ap_1 = ns3.Ssid("wifi-default-3")
wifi_ap_1 = ns3.WifiHelper.Default()
wifiMac_ap_1 = ns3.NqosWifiMacHelper.Default()
wifi_ap_1.SetRemoteStationManager("ns3::ArfWifiManager")
wifiMac_ap_1.SetType ("ns3::ApWifiMac",
"Ssid", ns3.SsidValue(ssid_ap_1),
"BeaconGeneration", ns3.BooleanValue(True),
"BeaconInterval", ns3.TimeValue(ns3.Seconds(2.5)))
ndc_ap_3.Add(wifi_ap_1.Install(wifiPhy_ap_1, wifiMac_ap_1, ap_1))
wifiMac_ap_1.SetType("ns3::StaWifiMac",
"Ssid", ns3.SsidValue(ssid_ap_1),
"ActiveProbing", ns3.BooleanValue(False))
ndc_ap_3.Add(wifi_ap_1.Install(wifiPhy_ap_1, wifiMac_ap_1, all_ap_3 ))
mobility_ap_1 = ns3.MobilityHelper()
mobility_ap_1.SetMobilityModel ("ns3::ConstantPositionMobilityModel")
mobility_ap_1.Install(ap_1)
mobility_ap_1.Install(all_ap_3)
all_p2p_3 = ns3.NodeContainer()
all_p2p_3.Add (router_0)
ndc_p2p_3 = p2p_p2p_1.Install(all_p2p_3)
all_emu_5 = ns3.NodeContainer()
all_emu_5.Add (emu_2)
all_emu_5.Add (emu_2)
ndc_emu_5 = emu_2.Install (all_emu_5)
all_hub_10 = ns3.NodeContainer()
all_hub_10.Add (bridge_2)
all_hub_10.Add (emu_2)
ndc_hub_10 = csma_hub_3.Install(all_hub_10)
NodeContainer all_tap_3;
all_tap_3.Add (tap_0);
all_tap_3.Add (tap_0);
ndc_tap_3 = csma_tap_0.Install(all_tap_3);
all_hub_11 = ns3.NodeContainer()
all_hub_11.Add (emu_2)
all_hub_11.Add (tap_0)
ndc_hub_11 = csma_hub_4.Install(all_hub_11)
NodeContainer all_tap_4;
all_tap_4.Add (tap_1);
all_tap_4.Add (tap_1);
ndc_tap_4 = csma_tap_1.Install(all_tap_4);
NodeContainer all_tap_5;
all_tap_5.Add (tap_2);
all_tap_5.Add (tap_2);
ndc_tap_5 = csma_tap_2.Install(all_tap_5);
all_hub_12 = ns3.NodeContainer()
all_hub_12.Add (emu_0)
all_hub_12.Add (tap_2)
ndc_hub_12 = csma_hub_5.Install(all_hub_12)
all_hub_13 = ns3.NodeContainer()
all_hub_13.Add (emu_1)
all_hub_13.Add (tap_1)
ndc_hub_13 = csma_hub_6.Install(all_hub_13)
all_p2p_4 = ns3.NodeContainer()
all_p2p_4.Add (router_2)
all_p2p_4.Add (router_0)
ndc_p2p_4 = p2p_p2p_4.Install(all_p2p_4)
# Install the IP stack.
internetStackH = ns3.InternetStackHelper()
internetStackH.Install (term_0)
internetStackH.Install (term_1)
internetStackH.Install (term_2)
internetStackH.Install (ap_0)
internetStackH.Install (station_0)
internetStackH.Install (station_1)
internetStackH.Install (station_2)
internetStackH.Install (station_3)
internetStackH.Install (station_4)
internetStackH.Install (station_5)
internetStackH.Install (station_6)
internetStackH.Install (term_3)
internetStackH.Install (term_4)
internetStackH.Install (term_5)
internetStackH.Install (term_6)
internetStackH.Install (emu_0)
internetStackH.Install (emu_1)
internetStackH.Install (term_7)
internetStackH.Install (term_8)
internetStackH.Install (term_9)
internetStackH.Install (term_10)
internetStackH.Install (term_11)
internetStackH.Install (term_12)
internetStackH.Install (term_13)
internetStackH.Install (term_14)
internetStackH.Install (term_15)
internetStackH.Install (term_16)
internetStackH.Install (term_17)
internetStackH.Install (term_18)
internetStackH.Install (term_19)
internetStackH.Install (term_20)
internetStackH.Install (term_21)
internetStackH.Install (term_22)
internetStackH.Install (term_23)
internetStackH.Install (term_24)
internetStackH.Install (ap_1)
internetStackH.Install (station_7)
internetStackH.Install (station_8)
internetStackH.Install (station_9)
internetStackH.Install (station_10)
internetStackH.Install (station_11)
internetStackH.Install (station_12)
internetStackH.Install (station_13)
internetStackH.Install (emu_2)
internetStackH.Install (tap_0)
internetStackH.Install (tap_1)
internetStackH.Install (tap_2)
internetStackH.Install (term_0)
internetStackH.Install (term_1)
internetStackH.Install (term_2)
internetStackH.Install (router_0)
internetStackH.Install (ap_0)
internetStackH.Install (station_0)
internetStackH.Install (station_1)
internetStackH.Install (station_2)
internetStackH.Install (station_3)
internetStackH.Install (station_4)
internetStackH.Install (station_5)
internetStackH.Install (station_6)
internetStackH.Install (term_3)
internetStackH.Install (term_4)
internetStackH.Install (term_5)
internetStackH.Install (term_6)
internetStackH.Install (emu_0)
internetStackH.Install (emu_1)
internetStackH.Install (term_7)
internetStackH.Install (term_8)
internetStackH.Install (term_9)
internetStackH.Install (term_10)
internetStackH.Install (term_11)
internetStackH.Install (term_12)
internetStackH.Install (term_13)
internetStackH.Install (term_14)
internetStackH.Install (term_15)
internetStackH.Install (term_16)
internetStackH.Install (term_17)
internetStackH.Install (term_18)
internetStackH.Install (term_19)
internetStackH.Install (term_20)
internetStackH.Install (term_21)
internetStackH.Install (term_22)
internetStackH.Install (term_23)
internetStackH.Install (term_24)
internetStackH.Install (ap_1)
internetStackH.Install (station_7)
internetStackH.Install (station_8)
internetStackH.Install (station_9)
internetStackH.Install (station_10)
internetStackH.Install (station_11)
internetStackH.Install (station_12)
internetStackH.Install (station_13)
internetStackH.Install (emu_2)
internetStackH.Install (tap_0)
internetStackH.Install (tap_1)
internetStackH.Install (tap_2)
internetStackH.Install (router_2)
internetStackH.Install (term_50)
internetStackH.Install (term_51)
# IP assign.
ipv4 = ns3.Ipv4AddressHelper()
ipv4.SetBase (ns3.Ipv4Address("10.0.0.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_bridge_0 = ipv4.Assign (ndc_bridge_0)
ipv4.SetBase (ns3.Ipv4Address("10.0.1.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_ap_0 = ipv4.Assign (ndc_ap_0)
ipv4.SetBase (ns3.Ipv4Address("10.0.2.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_bridge_1 = ipv4.Assign (ndc_bridge_1)
ipv4.SetBase (ns3.Ipv4Address("10.0.3.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_bridge_2 = ipv4.Assign (ndc_bridge_2)
ipv4.SetBase (ns3.Ipv4Address("10.0.4.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_hub_0 = ipv4.Assign (ndc_hub_0)
ipv4.SetBase (ns3.Ipv4Address("10.0.5.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_emu_0 = ipv4.Assign (ndc_emu_0)
ipv4.SetBase (ns3.Ipv4Address("10.0.6.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_emu_1 = ipv4.Assign (ndc_emu_1)
ipv4.SetBase (ns3.Ipv4Address("10.0.7.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_hub_1 = ipv4.Assign (ndc_hub_1)
ipv4.SetBase (ns3.Ipv4Address("10.0.8.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_hub_2 = ipv4.Assign (ndc_hub_2)
ipv4.SetBase (ns3.Ipv4Address("10.0.9.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_bridge_3 = ipv4.Assign (ndc_bridge_3)
ipv4.SetBase (ns3.Ipv4Address("10.0.10.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_bridge_4 = ipv4.Assign (ndc_bridge_4)
ipv4.SetBase (ns3.Ipv4Address("10.0.11.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_ap_1 = ipv4.Assign (ndc_ap_1)
ipv4.SetBase (ns3.Ipv4Address("10.0.12.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_emu_2 = ipv4.Assign (ndc_emu_2)
ipv4.SetBase (ns3.Ipv4Address("10.0.13.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_hub_3 = ipv4.Assign (ndc_hub_3)
ipv4.SetBase (ns3.Ipv4Address("10.0.14.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_tap_0 = ipv4.Assign (ndc_tap_0)
ipv4.SetBase (ns3.Ipv4Address("10.0.15.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_hub_4 = ipv4.Assign (ndc_hub_4)
ipv4.SetBase (ns3.Ipv4Address("10.0.16.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_tap_1 = ipv4.Assign (ndc_tap_1)
ipv4.SetBase (ns3.Ipv4Address("10.0.17.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_tap_2 = ipv4.Assign (ndc_tap_2)
ipv4.SetBase (ns3.Ipv4Address("10.0.18.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_hub_5 = ipv4.Assign (ndc_hub_5)
ipv4.SetBase (ns3.Ipv4Address("10.0.19.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_hub_6 = ipv4.Assign (ndc_hub_6)
ipv4.SetBase (ns3.Ipv4Address("10.0.20.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_bridge_6 = ipv4.Assign (ndc_bridge_6)
ipv4.SetBase (ns3.Ipv4Address("10.0.21.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_ap_2 = ipv4.Assign (ndc_ap_2)
ipv4.SetBase (ns3.Ipv4Address("10.0.22.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_p2p_2 = ipv4.Assign (ndc_p2p_2)
ipv4.SetBase (ns3.Ipv4Address("10.0.23.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_bridge_7 = ipv4.Assign (ndc_bridge_7)
ipv4.SetBase (ns3.Ipv4Address("10.0.24.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_bridge_8 = ipv4.Assign (ndc_bridge_8)
ipv4.SetBase (ns3.Ipv4Address("10.0.25.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_hub_7 = ipv4.Assign (ndc_hub_7)
ipv4.SetBase (ns3.Ipv4Address("10.0.26.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_emu_3 = ipv4.Assign (ndc_emu_3)
ipv4.SetBase (ns3.Ipv4Address("10.0.27.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_emu_4 = ipv4.Assign (ndc_emu_4)
ipv4.SetBase (ns3.Ipv4Address("10.0.28.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_hub_8 = ipv4.Assign (ndc_hub_8)
ipv4.SetBase (ns3.Ipv4Address("10.0.29.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_hub_9 = ipv4.Assign (ndc_hub_9)
ipv4.SetBase (ns3.Ipv4Address("10.0.30.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_bridge_9 = ipv4.Assign (ndc_bridge_9)
ipv4.SetBase (ns3.Ipv4Address("10.0.31.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_bridge_10 = ipv4.Assign (ndc_bridge_10)
ipv4.SetBase (ns3.Ipv4Address("10.0.32.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_ap_3 = ipv4.Assign (ndc_ap_3)
ipv4.SetBase (ns3.Ipv4Address("10.0.33.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_p2p_3 = ipv4.Assign (ndc_p2p_3)
ipv4.SetBase (ns3.Ipv4Address("10.0.34.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_emu_5 = ipv4.Assign (ndc_emu_5)
ipv4.SetBase (ns3.Ipv4Address("10.0.35.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_hub_10 = ipv4.Assign (ndc_hub_10)
ipv4.SetBase (ns3.Ipv4Address("10.0.36.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_tap_3 = ipv4.Assign (ndc_tap_3)
ipv4.SetBase (ns3.Ipv4Address("10.0.37.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_hub_11 = ipv4.Assign (ndc_hub_11)
ipv4.SetBase (ns3.Ipv4Address("10.0.38.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_tap_4 = ipv4.Assign (ndc_tap_4)
ipv4.SetBase (ns3.Ipv4Address("10.0.39.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_tap_5 = ipv4.Assign (ndc_tap_5)
ipv4.SetBase (ns3.Ipv4Address("10.0.40.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_hub_12 = ipv4.Assign (ndc_hub_12)
ipv4.SetBase (ns3.Ipv4Address("10.0.41.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_hub_13 = ipv4.Assign (ndc_hub_13)
ipv4.SetBase (ns3.Ipv4Address("10.0.42.0"), ns3.Ipv4Mask("255.255.255.0"))
iface_ndc_p2p_4 = ipv4.Assign (ndc_p2p_4)
# Tap Bridge.
tapBridge_tap_0 = ns3.TapBridgeHelper(iface_ndc_tap_0.GetAddress(1))
tapBridge_tap_0.SetAttribute("Mode", ns3.StringValue (mode_tap_0))
tapBridge_tap_0.SetAttribute("DeviceName", ns3.StringValue (tapName_tap_0))
tapBridge_tap_0.Install(tap_0.Get(0), ndc_tap_0.Get(0))
tapBridge_tap_1 = ns3.TapBridgeHelper(iface_ndc_tap_1.GetAddress(1))
tapBridge_tap_1.SetAttribute("Mode", ns3.StringValue (mode_tap_1))
tapBridge_tap_1.SetAttribute("DeviceName", ns3.StringValue (tapName_tap_1))
tapBridge_tap_1.Install(tap_1.Get(0), ndc_tap_1.Get(0))
tapBridge_tap_2 = ns3.TapBridgeHelper(iface_ndc_tap_2.GetAddress(1))
tapBridge_tap_2.SetAttribute("Mode", ns3.StringValue (mode_tap_2))
tapBridge_tap_2.SetAttribute("DeviceName", ns3.StringValue (tapName_tap_2))
tapBridge_tap_2.Install(tap_2.Get(0), ndc_tap_2.Get(0))
tapBridge_tap_0 = ns3.TapBridgeHelper(iface_ndc_tap_3.GetAddress(1))
tapBridge_tap_0.SetAttribute("Mode", ns3.StringValue (mode_tap_0))
tapBridge_tap_0.SetAttribute("DeviceName", ns3.StringValue (tapName_tap_0))
tapBridge_tap_0.Install(tap_0.Get(0), ndc_tap_3.Get(0))
tapBridge_tap_1 = ns3.TapBridgeHelper(iface_ndc_tap_4.GetAddress(1))
tapBridge_tap_1.SetAttribute("Mode", ns3.StringValue (mode_tap_1))
tapBridge_tap_1.SetAttribute("DeviceName", ns3.StringValue (tapName_tap_1))
tapBridge_tap_1.Install(tap_1.Get(0), ndc_tap_4.Get(0))
tapBridge_tap_2 = ns3.TapBridgeHelper(iface_ndc_tap_5.GetAddress(1))
tapBridge_tap_2.SetAttribute("Mode", ns3.StringValue (mode_tap_2))
tapBridge_tap_2.SetAttribute("DeviceName", ns3.StringValue (tapName_tap_2))
tapBridge_tap_2.Install(tap_2.Get(0), ndc_tap_5.Get(0))
# Generate Route.
ns3.Ipv4GlobalRoutingHelper.PopulateRoutingTables ()
# Generate Application.
# Simulation.
# Pcap output.
# Stop the simulation after x seconds.
stopTime = 1
ns3.Simulator.Stop (ns3.Seconds(stopTime))
# Start and clean simulation.
ns3.Simulator.Run()
ns3.Simulator.Destroy()