def slicing_done(target, gcode_name, select_after_slicing, print_after_slicing): if select_after_slicing or print_after_slicing: sd = False if target == FileDestinations.SDCARD: filenameToSelect = gcode_name sd = True else: filenameToSelect = fileManager.get_absolute_path(target, gcode_name) printer.selectFile(filenameToSelect, sd, print_after_slicing)
def slicing_done(target, gcode_name, select_after_slicing, print_after_slicing): if select_after_slicing or print_after_slicing: sd = False if target == FileDestinations.SDCARD: filenameToSelect = gcode_name sd = True else: filenameToSelect = fileManager.get_absolute_path( target, gcode_name) printer.selectFile(filenameToSelect, sd, print_after_slicing)
def gcodeFileCommand(filename, target): if not target in [FileDestinations.LOCAL, FileDestinations.SDCARD]: return make_response("Unknown target: %s" % target, 404) if not _verifyFileExists(target, filename): return make_response("File not found on '%s': %s" % (target, filename), 404) # valid file commands, dict mapping command name to mandatory parameters valid_commands = { "select": [], "slice": [] } command, data, response = util.getJsonCommandFromRequest(request, valid_commands) if response is not None: return response if command == "select": # selects/loads a file printAfterLoading = False if "print" in data.keys() and data["print"] in valid_boolean_trues: if not printer.isOperational(): return make_response("Printer is not operational, cannot directly start printing", 409) printAfterLoading = True sd = False if target == FileDestinations.SDCARD: filenameToSelect = filename sd = True else: filenameToSelect = fileManager.get_absolute_path(target, filename) printer.selectFile(filenameToSelect, sd, printAfterLoading) elif command == "slice": if "slicer" in data.keys(): slicer = data["slicer"] del data["slicer"] if not slicer in slicingManager.registered_slicers: return make_response("Slicer {slicer} is not available".format(**locals()), 400) slicer_instance = slicingManager.get_slicer(slicer) elif "cura" in slicingManager.registered_slicers: slicer = "cura" slicer_instance = slicingManager.get_slicer("cura") else: return make_response("Cannot slice {filename}, no slicer available".format(**locals()), 415) if not octoprint.filemanager.valid_file_type(filename, type="stl"): return make_response("Cannot slice {filename}, not an STL file".format(**locals()), 415) if slicer_instance.get_slicer_properties()["same_device"] and (printer.isPrinting() or printer.isPaused()): # slicer runs on same device as OctoPrint, slicing while printing is hence disabled return make_response("Cannot slice on {slicer} while printing due to performance reasons".format(**locals()), 409) if "gcode" in data.keys() and data["gcode"]: gcode_name = data["gcode"] del data["gcode"] else: import os name, _ = os.path.splitext(filename) gcode_name = name + ".gco" # prohibit overwriting the file that is currently being printed currentOrigin, currentFilename = _getCurrentFile() if currentFilename == gcode_name and currentOrigin == target and (printer.isPrinting() or printer.isPaused()): make_response("Trying to slice into file that is currently being printed: %s" % gcode_name, 409) if "profile" in data.keys() and data["profile"]: profile = data["profile"] del data["profile"] else: profile = None if "printerProfile" in data.keys() and data["printerProfile"]: printerProfile = data["printerProfile"] del data["printerProfile"] else: printerProfile = None if "position" in data.keys() and data["position"] and isinstance(data["position"], dict) and "x" in data["position"] and "y" in data["position"]: position = data["position"] del data["position"] else: position = None select_after_slicing = False if "select" in data.keys() and data["select"] in valid_boolean_trues: if not printer.isOperational(): return make_response("Printer is not operational, cannot directly select for printing", 409) select_after_slicing = True print_after_slicing = False if "print" in data.keys() and data["print"] in valid_boolean_trues: if not printer.isOperational(): return make_response("Printer is not operational, cannot directly start printing", 409) select_after_slicing = print_after_slicing = True override_keys = [k for k in data if k.startswith("profile.") and data[k] is not None] overrides = dict() for key in override_keys: overrides[key[len("profile."):]] = data[key] def slicing_done(target, gcode_name, select_after_slicing, print_after_slicing): if select_after_slicing or print_after_slicing: sd = False if target == FileDestinations.SDCARD: filenameToSelect = gcode_name sd = True else: filenameToSelect = fileManager.get_absolute_path(target, gcode_name) printer.selectFile(filenameToSelect, sd, print_after_slicing) ok, result = fileManager.slice(slicer, target, filename, target, gcode_name, profile=profile, printer_profile_id=printerProfile, position=position, overrides=overrides, callback=slicing_done, callback_args=(target, gcode_name, select_after_slicing, print_after_slicing)) if ok: files = {} location = url_for(".readGcodeFile", target=target, filename=gcode_name, _external=True) result = { "name": gcode_name, "origin": FileDestinations.LOCAL, "refs": { "resource": location, "download": url_for("index", _external=True) + "downloads/files/" + target + "/" + gcode_name } } r = make_response(jsonify(result), 202) r.headers["Location"] = location return r else: return make_response("Could not slice: {result}".format(result=result), 500) return NO_CONTENT
def uploadGcodeFile(target): if not target in [FileDestinations.LOCAL, FileDestinations.SDCARD]: return make_response("Unknown target: %s" % target, 404) input_name = "file" input_upload_name = input_name + "." + settings().get(["server", "uploads", "nameSuffix"]) input_upload_path = input_name + "." + settings().get(["server", "uploads", "pathSuffix"]) if input_upload_name in request.values and input_upload_path in request.values: import shutil upload = util.Object() upload.filename = request.values[input_upload_name] upload.save = lambda new_path: shutil.move(request.values[input_upload_path], new_path) elif input_name in request.files: upload = request.files[input_name] else: return make_response("No file included", 400) if target == FileDestinations.SDCARD and not settings().getBoolean(["feature", "sdSupport"]): return make_response("SD card support is disabled", 404) sd = target == FileDestinations.SDCARD selectAfterUpload = "select" in request.values.keys() and request.values["select"] in valid_boolean_trues printAfterSelect = "print" in request.values.keys() and request.values["print"] in valid_boolean_trues if sd: # validate that all preconditions for SD upload are met before attempting it if not (printer.isOperational() and not (printer.isPrinting() or printer.isPaused())): return make_response("Can not upload to SD card, printer is either not operational or already busy", 409) if not printer.isSdReady(): return make_response("Can not upload to SD card, not yet initialized", 409) # determine current job currentFilename = None currentOrigin = None currentJob = printer.getCurrentJob() if currentJob is not None and "file" in currentJob.keys(): currentJobFile = currentJob["file"] if "name" in currentJobFile.keys() and "origin" in currentJobFile.keys(): currentFilename = currentJobFile["name"] currentOrigin = currentJobFile["origin"] # determine future filename of file to be uploaded, abort if it can't be uploaded try: futureFilename = fileManager.sanitize_name(FileDestinations.LOCAL, upload.filename) except: futureFilename = None if futureFilename is None or not (slicingManager.slicing_enabled or octoprint.filemanager.valid_file_type(futureFilename, type="gcode")): return make_response("Can not upload file %s, wrong format?" % upload.filename, 415) # prohibit overwriting currently selected file while it's being printed if futureFilename == currentFilename and target == currentOrigin and printer.isPrinting() or printer.isPaused(): return make_response("Trying to overwrite file that is currently being printed: %s" % currentFilename, 409) def fileProcessingFinished(filename, absFilename, destination): """ Callback for when the file processing (upload, optional slicing, addition to analysis queue) has finished. Depending on the file's destination triggers either streaming to SD card or directly calls selectAndOrPrint. """ if destination == FileDestinations.SDCARD and octoprint.filemanager.valid_file_type(filename, "gcode"): return filename, printer.addSdFile(filename, absFilename, selectAndOrPrint) else: selectAndOrPrint(filename, absFilename, destination) return filename def selectAndOrPrint(filename, absFilename, destination): """ Callback for when the file is ready to be selected and optionally printed. For SD file uploads this is only the case after they have finished streaming to the printer, which is why this callback is also used for the corresponding call to addSdFile. Selects the just uploaded file if either selectAfterUpload or printAfterSelect are True, or if the exact file is already selected, such reloading it. """ if octoprint.filemanager.valid_file_type(added_file, "gcode") and (selectAfterUpload or printAfterSelect or (currentFilename == filename and currentOrigin == destination)): printer.selectFile(absFilename, destination == FileDestinations.SDCARD, printAfterSelect) added_file = fileManager.add_file(FileDestinations.LOCAL, upload.filename, upload, allow_overwrite=True) if added_file is None: return make_response("Could not upload the file %s" % upload.filename, 500) if octoprint.filemanager.valid_file_type(added_file, "stl"): filename = added_file done = True else: filename = fileProcessingFinished(added_file, fileManager.get_absolute_path(FileDestinations.LOCAL, added_file), target) done = True sdFilename = None if isinstance(filename, tuple): filename, sdFilename = filename eventManager.fire(Events.UPLOAD, {"file": filename, "target": target}) files = {} location = url_for(".readGcodeFile", target=FileDestinations.LOCAL, filename=filename, _external=True) files.update({ FileDestinations.LOCAL: { "name": filename, "origin": FileDestinations.LOCAL, "refs": { "resource": location, "download": url_for("index", _external=True) + "downloads/files/" + FileDestinations.LOCAL + "/" + filename } } }) if sd and sdFilename: location = url_for(".readGcodeFile", target=FileDestinations.SDCARD, filename=sdFilename, _external=True) files.update({ FileDestinations.SDCARD: { "name": sdFilename, "origin": FileDestinations.SDCARD, "refs": { "resource": location } } }) r = make_response(jsonify(files=files, done=done), 201) r.headers["Location"] = location return r
def gcodeFileCommand(filename, target): if not target in [ FileDestinations.LOCAL, FileDestinations.SDCARD, FileDestinations.FastbotSDCARD ]: return make_response("Unknown target: %s" % target, 404) if not _verifyFileExists(target, filename): return make_response("File not found on '%s': %s" % (target, filename), 404) # valid file commands, dict mapping command name to mandatory parameters valid_commands = {"select": [], "slice": []} command, data, response = util.getJsonCommandFromRequest( request, valid_commands) if response is not None: return response if command == "select": # selects/loads a file printAfterLoading = False if "print" in data.keys() and data["print"] in valid_boolean_trues: if not printer.isOperational(): return make_response( "Printer is not operational, cannot directly start printing", 409) printAfterLoading = True if target == FileDestinations.SDCARD: filenameToSelect = filename else: filenameToSelect = fileManager.get_absolute_path(target, filename) printer.selectFile(filenameToSelect, target, printAfterLoading) elif command == "slice": if "slicer" in data.keys(): slicer = data["slicer"] del data["slicer"] if not slicer in slicingManager.registered_slicers: return make_response( "Slicer {slicer} is not available".format(**locals()), 400) slicer_instance = slicingManager.get_slicer(slicer) elif "cura" in slicingManager.registered_slicers: slicer = "cura" slicer_instance = slicingManager.get_slicer("cura") else: return make_response( "Cannot slice {filename}, no slicer available".format( **locals()), 415) if not octoprint.filemanager.valid_file_type(filename, type="stl"): return make_response( "Cannot slice {filename}, not an STL file".format(**locals()), 415) if slicer_instance.get_slicer_properties()["same_device"] and ( printer.isPrinting() or printer.isPaused()): # slicer runs on same device as OctoPrint, slicing while printing is hence disabled return make_response( "Cannot slice on {slicer} while printing due to performance reasons" .format(**locals()), 409) if "gcode" in data.keys() and data["gcode"]: gcode_name = data["gcode"] del data["gcode"] else: import os name, _ = os.path.splitext(filename) gcode_name = name + ".gco" # prohibit overwriting the file that is currently being printed currentOrigin, currentFilename = _getCurrentFile() if currentFilename == gcode_name and currentOrigin == target and ( printer.isPrinting() or printer.isPaused()): make_response( "Trying to slice into file that is currently being printed: %s" % gcode_name, 409) if "profile" in data.keys() and data["profile"]: profile = data["profile"] del data["profile"] else: profile = None if "printerProfile" in data.keys() and data["printerProfile"]: printerProfile = data["printerProfile"] del data["printerProfile"] else: printerProfile = None if "position" in data.keys() and data["position"] and isinstance( data["position"], dict) and "x" in data["position"] and "y" in data["position"]: position = data["position"] del data["position"] else: position = None select_after_slicing = False if "select" in data.keys() and data["select"] in valid_boolean_trues: if not printer.isOperational(): return make_response( "Printer is not operational, cannot directly select for printing", 409) select_after_slicing = True print_after_slicing = False if "print" in data.keys() and data["print"] in valid_boolean_trues: if not printer.isOperational(): return make_response( "Printer is not operational, cannot directly start printing", 409) select_after_slicing = print_after_slicing = True override_keys = [ k for k in data if k.startswith("profile.") and data[k] is not None ] overrides = dict() for key in override_keys: overrides[key[len("profile."):]] = data[key] def slicing_done(target, gcode_name, select_after_slicing, print_after_slicing): if select_after_slicing or print_after_slicing: sd = False if target == FileDestinations.SDCARD: filenameToSelect = gcode_name sd = True else: filenameToSelect = fileManager.get_absolute_path( target, gcode_name) printer.selectFile(filenameToSelect, sd, print_after_slicing) ok, result = fileManager.slice(slicer, target, filename, target, gcode_name, profile=profile, printer_profile_id=printerProfile, position=position, overrides=overrides, callback=slicing_done, callback_args=(target, gcode_name, select_after_slicing, print_after_slicing)) if ok: files = {} location = url_for(".readGcodeFile", target=target, filename=gcode_name, _external=True) result = { "name": gcode_name, "origin": FileDestinations.LOCAL, "refs": { "resource": location, "download": url_for("index", _external=True) + "downloads/files/" + target + "/" + gcode_name } } r = make_response(jsonify(result), 202) r.headers["Location"] = location return r else: return make_response( "Could not slice: {result}".format(result=result), 500) return NO_CONTENT
def uploadGcodeFile(target): print("lkj uploadGcodeFile target:%s" % str(target)) if target in ["extruder1", "extruder2", "bed"]: return upload_temp_curve_firmware(target) if target == "firmware": return uploadFirmwareFile(target) if target == FileDestinations.FastbotSDCARD: return uploadFastBotSDCARD(target) if not target in [FileDestinations.LOCAL, FileDestinations.SDCARD]: return make_response("Unknown target: %s" % target, 404) input_name = "file" input_upload_name = input_name + "." + settings().get( ["server", "uploads", "nameSuffix"]) input_upload_path = input_name + "." + settings().get( ["server", "uploads", "pathSuffix"]) if input_upload_name in request.values and input_upload_path in request.values: import shutil upload = util.Object() upload.filename = request.values[input_upload_name] upload.save = lambda new_path: shutil.move( request.values[input_upload_path], new_path) elif input_name in request.files: upload = request.files[input_name] else: return make_response("No file included", 400) if target == FileDestinations.SDCARD and not settings().getBoolean( ["feature", "sdSupport"]): return make_response("SD card support is disabled", 404) sd = target == FileDestinations.SDCARD selectAfterUpload = "select" in request.values.keys( ) and request.values["select"] in valid_boolean_trues printAfterSelect = "print" in request.values.keys( ) and request.values["print"] in valid_boolean_trues if sd: # validate that all preconditions for SD upload are met before attempting it if not (printer.isOperational() and not (printer.isPrinting() or printer.isPaused())): return make_response( "Can not upload to SD card, printer is either not operational or already busy", 409) if not printer.isSdReady(): return make_response( "Can not upload to SD card, not yet initialized", 409) # determine current job currentFilename = None currentOrigin = None currentJob = printer.getCurrentJob() if currentJob is not None and "file" in currentJob.keys(): currentJobFile = currentJob["file"] if "name" in currentJobFile.keys() and "origin" in currentJobFile.keys( ): currentFilename = currentJobFile["name"] currentOrigin = currentJobFile["origin"] # determine future filename of file to be uploaded, abort if it can't be uploaded try: futureFilename = fileManager.sanitize_name(FileDestinations.LOCAL, upload.filename) except: futureFilename = None if futureFilename is None or not (slicingManager.slicing_enabled or octoprint.filemanager.valid_file_type( futureFilename, type="gcode")): return make_response( "Can not upload file %s, wrong format?" % upload.filename, 415) # prohibit overwriting currently selected file while it's being printed if futureFilename == currentFilename and target == currentOrigin and printer.isPrinting( ) or printer.isPaused(): return make_response( "Trying to overwrite file that is currently being printed: %s" % currentFilename, 409) def fileProcessingFinished(filename, absFilename, destination): """ Callback for when the file processing (upload, optional slicing, addition to analysis queue) has finished. Depending on the file's destination triggers either streaming to SD card or directly calls selectAndOrPrint. """ if destination == FileDestinations.SDCARD and octoprint.filemanager.valid_file_type( filename, "gcode"): return filename, printer.addSdFile(filename, absFilename, selectAndOrPrint) else: selectAndOrPrint(filename, absFilename, destination) return filename def selectAndOrPrint(filename, absFilename, destination): """ Callback for when the file is ready to be selected and optionally printed. For SD file uploads this is only the case after they have finished streaming to the printer, which is why this callback is also used for the corresponding call to addSdFile. Selects the just uploaded file if either selectAfterUpload or printAfterSelect are True, or if the exact file is already selected, such reloading it. """ if octoprint.filemanager.valid_file_type(added_file, "gcode") and ( selectAfterUpload or printAfterSelect or (currentFilename == filename and currentOrigin == destination)): printer.selectFile(absFilename, destination == FileDestinations.SDCARD, printAfterSelect) added_file = fileManager.add_file(FileDestinations.LOCAL, upload.filename, upload, allow_overwrite=True) if added_file is None: return make_response("Could not upload the file %s" % upload.filename, 500) if octoprint.filemanager.valid_file_type(added_file, "stl"): filename = added_file done = True else: filename = fileProcessingFinished( added_file, fileManager.get_absolute_path(FileDestinations.LOCAL, added_file), target) done = True sdFilename = None if isinstance(filename, tuple): filename, sdFilename = filename eventManager.fire(Events.UPLOAD, {"file": filename, "target": target}) files = {} location = url_for(".readGcodeFile", target=FileDestinations.LOCAL, filename=filename, _external=True) files.update({ FileDestinations.LOCAL: { "name": filename, "origin": FileDestinations.LOCAL, "refs": { "resource": location, "download": url_for("index", _external=True) + "downloads/files/" + FileDestinations.LOCAL + "/" + filename } } }) if sd and sdFilename: location = url_for(".readGcodeFile", target=FileDestinations.SDCARD, filename=sdFilename, _external=True) files.update({ FileDestinations.SDCARD: { "name": sdFilename, "origin": FileDestinations.SDCARD, "refs": { "resource": location } } }) r = make_response(jsonify(files=files, done=done), 201) r.headers["Location"] = location return r