def _connect(self):
self.changeState(State.OPENING_CONNECTION)
if self._port == "VIRTUAL":
self._serial = VirtualPrinter(read_timeout=self._readTimeout,
write_timeout=self._writeTimeout)
self.changeState(State.CONNECTED)
self._transport_logger.debug("Connected to %s" % self._serial)
else:
try:
self._serial = serial.Serial(self._port,
self._baudrate,
timeout=self._readTimeout,
writeTimeout=self._writeTimeout)
self.changeState(State.CONNECTED)
self._transport_logger.debug("Connected to %s" % self._serial)
except:
self.logError(
"Unexpected error while connecting to serial port: %s %s" %
(self._port, getExceptionString()))
self.onError(
"Failed to open serial port, permissions correct?")
return False
eventManager().fire(Events.CONNECTED, {
"port": self._port,
"baudrate": self._baudrate
})
return True
def _openSerial(self):
if self._port == 'AUTO':
self._changeState(self.STATE_DETECT_SERIAL)
programmer = stk500v2.Stk500v2()
self._log("Serial port list: %s" % (str(serialList())))
for p in serialList():
try:
self._log("Connecting to: %s" % (p))
programmer.connect(p)
self._serial = programmer.leaveISP()
break
except ispBase.IspError as (e):
self._log("Error while connecting to %s: %s" % (p, str(e)))
pass
except:
self._log(
"Unexpected error while connecting to serial port: %s %s"
% (p, getExceptionString()))
programmer.close()
if self._serial is None:
self._log("Failed to autodetect serial port")
self._errorValue = 'Failed to autodetect serial port.'
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
return False
elif self._port == 'VIRTUAL':
self._changeState(self.STATE_OPEN_SERIAL)
self._serial = VirtualPrinter()
else:
self._changeState(self.STATE_OPEN_SERIAL)
try:
self._log("Connecting to: %s" % self._port)
if self._baudrate == 0:
self._serial = serial.Serial(str(self._port),
115200,
timeout=0.1,
writeTimeout=10000)
else:
self._serial = serial.Serial(str(self._port),
self._baudrate,
timeout=settings().getFloat([
"serial", "timeout",
"connection"
]),
writeTimeout=10000)
except:
self._log(
"Unexpected error while connecting to serial port: %s %s" %
(self._port, getExceptionString()))
self._errorValue = "Failed to open serial port, permissions correct?"
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
return False
return True
def _connect(self):
self.changeState(State.OPENING_CONNECTION)
if self._port == "VIRTUAL":
self._serial = VirtualPrinter(read_timeout=self._readTimeout, write_timeout=self._writeTimeout)
self.changeState(State.CONNECTED)
self._transport_logger.debug("Connected to %s" % self._serial)
else:
try:
self._serial = serial.Serial(self._port, self._baudrate, timeout=self._readTimeout, writeTimeout=self._writeTimeout)
self.changeState(State.CONNECTED)
self._transport_logger.debug("Connected to %s" % self._serial)
except:
self.logError("Unexpected error while connecting to serial port: %s %s" % (self._port, getExceptionString()))
self.onError("Failed to open serial port, permissions correct?")
return False
eventManager().fire(Events.CONNECTED, {"port": self._port, "baudrate": self._baudrate})
return True
def _openSerial(self):
if self._port == 'AUTO':
self._changeState(self.STATE_DETECT_SERIAL)
programmer = stk500v2.Stk500v2()
self._log("Serial port list: %s" % (str(self._callback.serialList())))
for p in self._callback.serialList():
try:
self._log("Connecting to: %s" % (p))
programmer.connect(p)
self._serial = programmer.leaveISP()
break
except ispBase.IspError as (e):
self._log("Error while connecting to %s: %s" % (p, str(e)))
pass
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (p, getExceptionString()))
programmer.close()
if self._serial is None:
self._log("Failed to autodetect serial port")
self._errorValue = 'Failed to autodetect serial port.'
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
return False
elif self._port == 'VIRTUAL':
self._changeState(self.STATE_OPEN_SERIAL)
self._serial = VirtualPrinter()
else:
self._changeState(self.STATE_OPEN_SERIAL)
try:
self._log("Connecting to: %s" % self._port)
if self._baudrate == 0:
self._serial = serial.Serial(str(self._port), 115200, timeout=0.1, writeTimeout=10000)
else:
self._serial = serial.Serial(str(self._port), self._baudrate, timeout=settings().getFloat(["serial", "timeout", "connection"]), writeTimeout=10000)
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (self._port, getExceptionString()))
self._errorValue = "Failed to open serial port, permissions correct?"
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
return False
return True
class MachineCom(object):
STATE_NONE = 0
STATE_OPEN_SERIAL = 1
STATE_DETECT_SERIAL = 2
STATE_DETECT_BAUDRATE = 3
STATE_CONNECTING = 4
STATE_OPERATIONAL = 5
STATE_PRINTING = 6
STATE_PAUSED = 7
STATE_CLOSED = 8
STATE_ERROR = 9
STATE_CLOSED_WITH_ERROR = 10
STATE_TRANSFERING_FILE = 11
def __init__(self, port = None, baudrate = None, callbackObject = None):
self._logger = logging.getLogger(__name__)
self._serialLogger = logging.getLogger("SERIAL")
if port == None:
port = settings().get(["serial", "port"])
if baudrate == None:
settingsBaudrate = settings().getInt(["serial", "baudrate"])
if settingsBaudrate is None:
baudrate = 0
else:
baudrate = settingsBaudrate
if callbackObject == None:
callbackObject = MachineComPrintCallback()
self._port = port
self._baudrate = baudrate
self._callback = callbackObject
self._state = self.STATE_NONE
self._serial = None
self._baudrateDetectList = callbackObject.baudrateList()
self._baudrateDetectRetry = 0
self._temp = {}
self._tempOffset = {}
self._bedTemp = None
self._bedTempOffset = 0
self._heatingUp = None
self._commandQueue = queue.Queue()
self._currentZ = None
self._currentLayer = None
self._lastLayerHeight = None
self._heatupWaitStartTime = 0
self._heatupWaitTimeLost = 0.0
self._currentExtruder = 0
self._alwaysSendChecksum = settings().getBoolean(["feature", "alwaysSendChecksum"])
self._currentLine = 1
self._resendDelta = None
self._lastLines = deque([], 100)
# SD status data
self._sdAvailable = False
self._sdFileList = False
self._sdFiles = []
# print job
self._currentFile = None
self._positionWhenPaused = {}
# regexes
floatPattern = "[-+]?[0-9]*\.?[0-9]+"
positiveFloatPattern = "[+]?[0-9]*\.?[0-9]+"
intPattern = "\d+"
self._regex_command = re.compile("^\s*([GM]\d+|T)")
self._regex_float = re.compile(floatPattern)
self._regex_paramZFloat = re.compile("Z(%s)" % floatPattern)
self._regex_paramSInt = re.compile("S(%s)" % intPattern)
self._regex_paramNInt = re.compile("N(%s)" % intPattern)
self._regex_paramTInt = re.compile("T(%s)" % intPattern)
self._regex_extrusion = re.compile("E%s" % positiveFloatPattern)
self._regex_minMaxError = re.compile("Error:[0-9]\n")
self._regex_sdPrintingByte = re.compile("([0-9]*)/([0-9]*)")
self._regex_sdFileOpened = re.compile("File opened:\s*(.*?)\s+Size:\s*(%s)" % intPattern)
self._regex_M114Response = re.compile("X:(%s)Y:(%s)Z:(%s)E:(%s)" % (floatPattern, floatPattern, floatPattern, floatPattern))
# Regex matching temperature entries in line. Groups will be as follows:
# - 1: whole tool designator incl. optional toolNumber ("T", "Tn", "B")
# - 2: toolNumber, if given ("", "n", "")
# - 3: actual temperature
# - 4: whole target substring, if given (e.g. " / 22.0")
# - 5: target temperature
self._regex_temp = re.compile("(B|T(\d*)):\s*(%s)(\s*\/?\s*(%s))?" % (positiveFloatPattern, positiveFloatPattern))
self._regex_repetierTempExtr = re.compile("TargetExtr([0-9]+):(%s)" % positiveFloatPattern)
self._regex_repetierTempBed = re.compile("TargetBed:(%s)" % positiveFloatPattern)
# multithreading locks
self._sendNextLock = threading.Lock()
self._sendingLock = threading.Lock()
# monitoring thread
self.thread = threading.Thread(target=self._monitor)
self.thread.daemon = True
self.thread.start()
def __del__(self):
self.close()
##~~ internal state management
def _changeState(self, newState):
if self._state == newState:
return
if newState == self.STATE_CLOSED or newState == self.STATE_CLOSED_WITH_ERROR:
if settings().get(["feature", "sdSupport"]):
self._sdFileList = False
self._sdFiles = []
self._callback.mcSdFiles([])
oldState = self.getStateString()
self._state = newState
self._log('Changing monitoring state from \'%s\' to \'%s\'' % (oldState, self.getStateString()))
self._callback.mcStateChange(newState)
def _log(self, message):
#Currently we don't want the logs to clogg the notification between box/boxrouter/browser
#self._callback.mcLog(message)
self._serialLogger.debug(message)
def _addToLastLines(self, cmd):
self._lastLines.append(cmd)
self._logger.debug("Got %d lines of history in memory" % len(self._lastLines))
##~~ getters
def getState(self):
return self._state
def getStateString(self):
if self._state == self.STATE_NONE:
return "Offline"
if self._state == self.STATE_OPEN_SERIAL:
return "Opening serial port"
if self._state == self.STATE_DETECT_SERIAL:
return "Detecting serial port"
if self._state == self.STATE_DETECT_BAUDRATE:
return "Detecting baudrate"
if self._state == self.STATE_CONNECTING:
return "Connecting"
if self._state == self.STATE_OPERATIONAL:
return "Operational"
if self._state == self.STATE_PRINTING:
if self.isSdFileSelected():
return "Printing from SD"
elif self.isStreaming():
return "Sending file to SD"
else:
return "Printing"
if self._state == self.STATE_PAUSED:
return "Paused"
if self._state == self.STATE_CLOSED:
return "Closed"
if self._state == self.STATE_ERROR:
return "Error: %s" % (self.getShortErrorString())
if self._state == self.STATE_CLOSED_WITH_ERROR:
return "Error: %s" % (self.getShortErrorString())
if self._state == self.STATE_TRANSFERING_FILE:
return "Transfering file to SD"
return "?%d?" % (self._state)
def getShortErrorString(self):
if len(self._errorValue) < 50:
return self._errorValue
return self._errorValue[:50] + "..."
def getErrorString(self):
return self._errorValue
def isClosedOrError(self):
return self._state == self.STATE_ERROR or self._state == self.STATE_CLOSED_WITH_ERROR or self._state == self.STATE_CLOSED
def isError(self):
return self._state == self.STATE_ERROR or self._state == self.STATE_CLOSED_WITH_ERROR
def isOperational(self):
return self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PRINTING or self._state == self.STATE_PAUSED or self._state == self.STATE_TRANSFERING_FILE
def isPrinting(self):
return self._state == self.STATE_PRINTING
def isSdPrinting(self):
return self.isSdFileSelected() and self.isPrinting()
def isSdFileSelected(self):
return self._currentFile is not None and isinstance(self._currentFile, PrintingSdFileInformation)
def isStreaming(self):
return self._currentFile is not None and isinstance(self._currentFile, StreamingGcodeFileInformation)
def isPaused(self):
return self._state == self.STATE_PAUSED
def isBusy(self):
return self.isPrinting() or self.isPaused()
def isSdReady(self):
return self._sdAvailable
def isHeatingUp(self):
return self._heatingUp
def getPrintProgress(self):
if self._currentFile is None:
return None
return self._currentFile.getProgress()
def getPrintFilepos(self):
if self._currentFile is None:
return None
return self._currentFile.getFilepos()
def getPrintTime(self):
if self._currentFile is None or self._currentFile.getStartTime() is None:
return None
else:
return time.time() - self._currentFile.getStartTime()
def getPrintTimeRemainingEstimate(self):
printTime = self.getPrintTime()
if printTime is None:
return None
printTime /= 60
progress = self._currentFile.getProgress()
if progress:
return printTimeTotal - printTime
else:
return None
def getTemp(self):
return self._temp
def getBedTemp(self):
return self._bedTemp
def getOffsets(self):
return self._tempOffset, self._bedTempOffset
def getConnection(self):
return self._port, self._baudrate
##~~ external interface
def close(self, isError = False):
printing = self.isPrinting() or self.isPaused()
if self._serial is not None:
try:
self._serial.close()
except OSError as e:
#log it but continue
self._logger.error('Error closing serial port: %s' % e)
if isError:
self._changeState(self.STATE_CLOSED_WITH_ERROR)
else:
self._changeState(self.STATE_CLOSED)
self._serial = None
if settings().get(["feature", "sdSupport"]):
self._sdFileList = []
if printing:
payload = None
if self._currentFile is not None:
payload = {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation()
}
eventManager().fire(Events.PRINT_FAILED, payload)
eventManager().fire(Events.DISCONNECTED)
def setTemperatureOffset(self, tool=None, bed=None):
if tool is not None:
self._tempOffset = tool
if bed is not None:
self._bedTempOffset = bed
def sendCommand(self, cmd):
cmd = cmd.encode('ascii', 'replace')
if self.isPrinting() and not self.isSdFileSelected():
self._commandQueue.put(cmd)
elif self.isOperational():
self._sendCommand(cmd)
def startPrint(self):
if not self.isOperational() or self.isPrinting():
return
if self._currentFile is None:
raise ValueError("No file selected for printing")
try:
self._currentFile.start()
self._lastLayerHeight = 0.0;
self._currentLayer = 0;
#self._currentLayer = 1;
#sefl._lastLayerHeight;
#self._callback.mcLayerChange(self._tentativeLayer)
wasPaused = self.isPaused()
self._changeState(self.STATE_PRINTING)
eventManager().fire(Events.PRINT_STARTED, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation()
})
if self.isSdFileSelected():
if wasPaused:
self.sendCommand("M26 S0")
self._currentFile.setFilepos(0)
self.sendCommand("M24")
else:
self._sendNext()
except:
self._errorValue = getExceptionString()
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
def startFileTransfer(self, filename, localFilename, remoteFilename):
if not self.isOperational() or self.isBusy():
logging.info("Printer is not operation or busy")
return
self._currentFile = StreamingGcodeFileInformation(filename, localFilename, remoteFilename)
self._currentFile.start()
self.sendCommand("M28 %s" % remoteFilename)
eventManager().fire(Events.TRANSFER_STARTED, {"local": localFilename, "remote": remoteFilename})
self._callback.mcFileTransferStarted(remoteFilename, self._currentFile.getFilesize())
def selectFile(self, filename, sd):
if self.isBusy():
return
if sd:
if not self.isOperational():
# printer is not connected, can't use SD
return
self.sendCommand("M23 %s" % filename)
else:
self._currentFile = PrintingGcodeFileInformation(filename, self.getOffsets)
eventManager().fire(Events.FILE_SELECTED, {
"file": self._currentFile.getFilename(),
"origin": self._currentFile.getFileLocation()
})
self._callback.mcFileSelected(filename, self._currentFile.getFilesize(), False)
def unselectFile(self):
if self.isBusy():
return
self._currentFile = None
eventManager().fire(Events.FILE_DESELECTED)
self._callback.mcFileSelected(None, None, False)
def cancelPrint(self):
if not self.isOperational() or self.isStreaming():
return
self._changeState(self.STATE_OPERATIONAL)
if self.isSdFileSelected():
self.sendCommand("M25") # pause print
self.sendCommand("M26 S0") # reset position in file to byte 0
eventManager().fire(Events.PRINT_CANCELLED, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation()
})
def setPause(self, pause):
if self.isStreaming():
return
if not pause and self.isPaused():
self._changeState(self.STATE_PRINTING)
if self.isSdFileSelected():
self.sendCommand("M24")
else:
#restore position
if self._positionWhenPaused:
self._currentZ = self._positionWhenPaused[2] # To avoid miscounting layers
#reset extrusion to what it was in case we did some extrusion while paused
self._sendCommand("G92 E%.4f" % self._positionWhenPaused[3])
#We need to reset the Z axis first in case they lowered it
self._sendCommand("G1 Z%.4f F2000" % ( self._positionWhenPaused[2] ))
#Get back to where you were before pausing
self._sendCommand("G1 X%.4f Y%.4f E%.4f F9000" % (self._positionWhenPaused[0], self._positionWhenPaused[1], self._positionWhenPaused[3] ))
#slow down the speed for the first movement
self._sendCommand("G1 F1000")
self._sendNext()
eventManager().fire(Events.PRINT_RESUMED, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation()
})
elif pause and self.isPrinting():
self._changeState(self.STATE_PAUSED)
if self.isSdFileSelected():
self.sendCommand("M25") # pause print
else:
self.sendCommand("M106 S0") #Stop fans
self.sendCommand("M114") # Current position is saved at self._positionWhenPaused
#the head movement out of the way is done on the M114 reponse.
eventManager().fire(Events.PRINT_PAUSED, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation()
})
def getSdFiles(self):
return self._sdFiles
def startSdFileTransfer(self, filename):
if not self.isOperational() or self.isBusy():
return
self._changeState(self.STATE_TRANSFERING_FILE)
self.sendCommand("M28 %s" % filename.lower())
def endSdFileTransfer(self, filename):
if not self.isOperational() or self.isBusy():
return
self.sendCommand("M29 %s" % filename.lower())
self._changeState(self.STATE_OPERATIONAL)
self.refreshSdFiles()
def deleteSdFile(self, filename):
if not self.isOperational() or (self.isBusy() and
isinstance(self._currentFile, PrintingSdFileInformation) and
self._currentFile.getFilename() == filename):
# do not delete a file from sd we are currently printing from
return
self.sendCommand("M30 %s" % filename.lower())
self.refreshSdFiles()
def refreshSdFiles(self):
if not self.isOperational() or self.isBusy():
return
self.sendCommand("M20")
def initSdCard(self):
if not self.isOperational():
return
self.sendCommand("M21")
if settings().getBoolean(["feature", "sdAlwaysAvailable"]):
self._sdAvailable = True
self.refreshSdFiles()
self._callback.mcSdStateChange(self._sdAvailable)
def releaseSdCard(self):
if not self.isOperational() or (self.isBusy() and self.isSdFileSelected()):
# do not release the sd card if we are currently printing from it
return
self.sendCommand("M22")
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
self._callback.mcSdFiles(self._sdFiles)
##~~ communication monitoring and handling
def _parseTemperatures(self, line):
result = {}
maxToolNum = 0
for match in re.finditer(self._regex_temp, line):
tool = match.group(1)
toolNumber = int(match.group(2)) if match.group(2) and len(match.group(2)) > 0 else None
if toolNumber > maxToolNum:
maxToolNum = toolNumber
try:
actual = float(match.group(3))
target = None
if match.group(4) and match.group(5):
target = float(match.group(5))
result[tool] = (toolNumber, actual, target)
except ValueError:
# catch conversion issues, we'll rather just not get the temperature update instead of killing the connection
pass
if "T0" in result.keys() and "T" in result.keys():
del result["T"]
return maxToolNum, result
def _processTemperatures(self, line):
maxToolNum, parsedTemps = self._parseTemperatures(line)
# extruder temperatures
if not "T0" in parsedTemps.keys() and "T" in parsedTemps.keys():
# only single reporting, "T" is our one and only extruder temperature
toolNum, actual, target = parsedTemps["T"]
if target is not None:
self._temp[0] = (actual, target)
elif 0 in self._temp.keys() and self._temp[0] is not None and isinstance(self._temp[0], tuple):
(oldActual, oldTarget) = self._temp[0]
self._temp[0] = (actual, oldTarget)
else:
self._temp[0] = (actual, None)
elif "T0" in parsedTemps.keys():
for n in range(maxToolNum + 1):
tool = "T%d" % n
if not tool in parsedTemps.keys():
continue
toolNum, actual, target = parsedTemps[tool]
if target is not None:
self._temp[toolNum] = (actual, target)
elif toolNum in self._temp.keys() and self._temp[toolNum] is not None and isinstance(self._temp[toolNum], tuple):
(oldActual, oldTarget) = self._temp[toolNum]
self._temp[toolNum] = (actual, oldTarget)
else:
self._temp[toolNum] = (actual, None)
# bed temperature
if "B" in parsedTemps.keys():
toolNum, actual, target = parsedTemps["B"]
if target is not None:
self._bedTemp = (actual, target)
elif self._bedTemp is not None and isinstance(self._bedTemp, tuple):
(oldActual, oldTarget) = self._bedTemp
self._bedTemp = (actual, oldTarget)
else:
self._bedTemp = (actual, None)
def _monitor(self):
feedbackControls = settings().getFeedbackControls()
pauseTriggers = settings().getPauseTriggers()
feedbackErrors = []
#Open the serial port.
if not self._openSerial():
return
self._log("Connected to: %s, starting monitor" % self._serial)
if self._baudrate == 0:
self._log("Starting baud rate detection")
self._changeState(self.STATE_DETECT_BAUDRATE)
else:
self._changeState(self.STATE_CONNECTING)
#Start monitoring the serial port.
timeout = getNewTimeout("communication")
tempRequestTimeout = getNewTimeout("temperature")
sdStatusRequestTimeout = getNewTimeout("sdStatus")
startSeen = not settings().getBoolean(["feature", "waitForStartOnConnect"])
self._heatingUp = False
swallowOk = False
supportRepetierTargetTemp = settings().getBoolean(["feature", "repetierTargetTemp"])
while True:
try:
line = self._readline()
if line is None:
break
if line.strip() is not "" and line.isalnum():
timeout = getNewTimeout("communication")
##~~ Error handling
line = self._handleErrors(line)
##~~ SD file list
# if we are currently receiving an sd file list, each line is just a filename, so just read it and abort processing
if self._sdFileList and not "End file list" in line:
fileinfo = line.strip().split(None, 2)
if len(fileinfo) > 1:
# we got extended file information here, so let's split filename and size and try to make them a bit nicer
filename, size = fileinfo
filename = filename.lower()
try:
size = int(size)
except ValueError:
# whatever that was, it was not an integer, so we'll just ignore it and set size to None
size = None
else:
# no extended file information, so only the filename is there and we set size to None
filename = fileinfo[0].lower()
size = None
if self._callback.fileManager.isValidFilename(filename):
if filterNonAscii(filename):
self._logger.warn("Got a file from printer's SD that has a non-ascii filename (%s), that shouldn't happen according to the protocol" % filename)
else:
self._sdFiles.append((filename, size))
continue
##~~ Temperature processing
if ' T:' in line or line.startswith('T:') or ' T0:' in line or line.startswith('T0:'):
self._processTemperatures(line)
self._callback.mcTempUpdate(self._temp, self._bedTemp)
#If we are waiting for an M109 or M190 then measure the time we lost during heatup, so we can remove that time from our printing time estimate.
if not 'ok' in line and self._heatupWaitStartTime != 0:
t = time.time()
self._heatupWaitTimeLost = t - self._heatupWaitStartTime
self._heatupWaitStartTime = t
elif supportRepetierTargetTemp and ('TargetExtr' in line or 'TargetBed' in line):
matchExtr = self._regex_repetierTempExtr.match(line)
matchBed = self._regex_repetierTempBed.match(line)
if matchExtr is not None:
toolNum = int(matchExtr.group(1))
try:
target = float(matchExtr.group(2))
if toolNum in self._temp.keys() and self._temp[toolNum] is not None and isinstance(self._temp[toolNum], tuple):
(actual, oldTarget) = self._temp[toolNum]
self._temp[toolNum] = (actual, target)
else:
self._temp[toolNum] = (None, target)
self._callback.mcTempUpdate(self._temp, self._bedTemp)
except ValueError:
pass
elif matchBed is not None:
try:
target = float(matchBed.group(1))
if self._bedTemp is not None and isinstance(self._bedTemp, tuple):
(actual, oldTarget) = self._bedTemp
self._bedTemp = (actual, target)
else:
self._bedTemp = (None, target)
self._callback.mcTempUpdate(self._temp, self._bedTemp)
except ValueError:
pass
##~~ SD Card handling
elif 'SD init fail' in line or 'volume.init failed' in line or 'openRoot failed' in line:
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Not SD printing' in line:
if self.isSdFileSelected() and self.isPrinting():
# something went wrong, printer is reporting that we actually are not printing right now...
self._sdFilePos = 0
self._changeState(self.STATE_OPERATIONAL)
elif 'SD card ok' in line and not self._sdAvailable:
self._sdAvailable = True
self.refreshSdFiles()
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Begin file list' in line:
self._sdFiles = []
self._sdFileList = True
elif 'End file list' in line:
self._sdFileList = False
self._callback.mcSdFiles(self._sdFiles)
elif 'SD printing byte' in line:
# answer to M27, at least on Marlin, Repetier and Sprinter: "SD printing byte %d/%d"
match = self._regex_sdPrintingByte.search(line)
self._currentFile.setFilepos(int(match.group(1)))
self._callback.mcProgress()
elif 'File opened' in line:
# answer to M23, at least on Marlin, Repetier and Sprinter: "File opened:%s Size:%d"
match = self._regex_sdFileOpened.search(line)
self._currentFile = PrintingSdFileInformation(match.group(1), int(match.group(2)))
elif 'File selected' in line:
# final answer to M23, at least on Marlin, Repetier and Sprinter: "File selected"
if self._currentFile is not None:
self._callback.mcFileSelected(self._currentFile.getFilename(), self._currentFile.getFilesize(), True)
eventManager().fire(Events.FILE_SELECTED, {
"file": self._currentFile.getFilename(),
"origin": self._currentFile.getFileLocation()
})
elif 'Writing to file' in line:
# anwer to M28, at least on Marlin, Repetier and Sprinter: "Writing to file: %s"
self._printSection = "CUSTOM"
self._changeState(self.STATE_PRINTING)
line = "ok"
elif 'Done printing file' in line:
# printer is reporting file finished printing
self._sdFilePos = 0
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire(Events.PRINT_DONE, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation(),
"time": self.getPrintTime(),
"layerCount": self._currentLayer
})
elif 'Done saving file' in line:
self.refreshSdFiles()
##~~ Message handling
elif line.strip() != '' \
and line.strip() != 'ok' and not line.startswith("wait") \
and not line.startswith('Resend:') \
and line != 'echo:Unknown command:""\n' \
and self.isOperational():
self._callback.mcMessage(line)
##~~ Parsing for feedback commands
if feedbackControls:
for name, matcher, template in feedbackControls:
if name in feedbackErrors:
# we previously had an error with that one, so we'll skip it now
continue
try:
match = matcher.search(line)
if match is not None:
formatFunction = None
if isinstance(template, str):
formatFunction = str.format
elif isinstance(template, unicode):
formatFunction = unicode.format
if formatFunction is not None:
self._callback.mcReceivedRegisteredMessage(name, formatFunction(template, *(match.groups("n/a"))))
except:
if not name in feedbackErrors:
self._logger.info("Something went wrong with feedbackControl \"%s\": " % name, exc_info=True)
feedbackErrors.append(name)
pass
##~~ Parsing for pause triggers
if pauseTriggers and not self.isStreaming():
if "enable" in pauseTriggers.keys() and pauseTriggers["enable"].search(line) is not None:
self.setPause(True)
elif "disable" in pauseTriggers.keys() and pauseTriggers["disable"].search(line) is not None:
self.setPause(False)
elif "toggle" in pauseTriggers.keys() and pauseTriggers["toggle"].search(line) is not None:
self.setPause(not self.isPaused())
if "ok" in line and self._heatingUp:
self._heatingUp = False
self._callback.mcHeatingUpUpdate(self._heatingUp)
### Baudrate detection
if self._state == self.STATE_DETECT_BAUDRATE:
if line == '' or time.time() > timeout:
if len(self._baudrateDetectList) < 1:
self.close()
self._errorValue = "No more baudrates to test, and no suitable baudrate found."
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
elif self._baudrateDetectRetry > 0:
self._baudrateDetectRetry -= 1
self._serial.write('\n')
self._log("Baudrate test retry: %d" % (self._baudrateDetectRetry))
self._sendCommand("M105")
self._testingBaudrate = True
else:
baudrate = self._baudrateDetectList.pop(0)
try:
self._serial.baudrate = baudrate
self._serial.timeout = settings().getFloat(["serial", "timeout", "detection"])
self._log("Trying baudrate: %d" % (baudrate))
self._baudrateDetectRetry = 5
self._baudrateDetectTestOk = 0
timeout = getNewTimeout("communication")
self._serial.write('\n')
self._sendCommand("M105")
self._testingBaudrate = True
except:
self._log("Unexpected error while setting baudrate: %d %s" % (baudrate, getExceptionString()))
elif 'ok' in line and 'T:' in line:
self._baudrateDetectTestOk += 1
if self._baudrateDetectTestOk < 10:
self._log("Baudrate test ok: %d" % (self._baudrateDetectTestOk))
self._sendCommand("M105")
else:
self._sendCommand("M999")
self._serial.timeout = settings().getFloat(["serial", "timeout", "connection"])
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
else:
self.initSdCard()
eventManager().fire(Events.CONNECTED, {"port": self._port, "baudrate": self._baudrate})
else:
self._testingBaudrate = False
### Connection attempt
elif self._state == self.STATE_CONNECTING:
if (line == "" or "wait" in line) and startSeen:
if time.time() > timeout:
self.close()
else:
self._sendCommand("M105")
elif "start" in line:
startSeen = True
elif "ok" in line and startSeen:
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
else:
self.initSdCard()
eventManager().fire(Events.CONNECTED, {"port": self._port, "baudrate": self._baudrate})
elif time.time() > timeout:
self.close()
### Operational
elif self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PAUSED:
#Request the temperature on comm timeout (every 5 seconds) when we are not printing.
if line == "" or "wait" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty():
self._sendCommand(self._commandQueue.get())
else:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("temperature")
# resend -> start resend procedure from requested line
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
else:
positionMatch = self._regex_M114Response.search(line)
if positionMatch:
self._positionWhenPaused = (
float(positionMatch.group(1)),
float(positionMatch.group(2)),
float(positionMatch.group(3)),
float(positionMatch.group(4))
)
if self.isPaused():
self.sendCommand("G1 F9000 X0 Y0 Z%.4f E%.4f" % (self._positionWhenPaused[2] + 5, self._positionWhenPaused[3] - 5))
### Printing
elif self._state == self.STATE_PRINTING:
if line == "" and time.time() > timeout:
self._log("Communication timeout during printing, forcing a line")
line = 'ok'
if self.isSdPrinting():
if time.time() > tempRequestTimeout and not self._heatingUp:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("temperature")
if time.time() > sdStatusRequestTimeout and not self._heatingUp:
self._sendCommand("M27")
sdStatusRequestTimeout = getNewTimeout("sdStatus")
else:
# Even when printing request the temperature every 5 seconds.
if time.time() > tempRequestTimeout and not self.isStreaming():
self._commandQueue.put("M105")
tempRequestTimeout = getNewTimeout("temperature")
if "ok" in line and swallowOk:
swallowOk = False
elif "ok" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty() and not self.isStreaming():
self._sendCommand(self._commandQueue.get(), True)
else:
self._sendNext()
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
except:
self._logger.exception("Something crashed inside the serial connection loop, please report this to AstroPrint:")
errorMsg = "See astrobox.log for details"
self._log(errorMsg)
self._errorValue = errorMsg
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
self._log("Connection closed, closing down monitor")
def _openSerial(self):
if self._port == 'AUTO':
self._changeState(self.STATE_DETECT_SERIAL)
programmer = stk500v2.Stk500v2()
self._log("Serial port list: %s" % (str(self._callback.serialList())))
for p in self._callback.serialList():
try:
self._log("Connecting to: %s" % (p))
programmer.connect(p)
self._serial = programmer.leaveISP()
break
except ispBase.IspError as (e):
self._log("Error while connecting to %s: %s" % (p, str(e)))
pass
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (p, getExceptionString()))
programmer.close()
if self._serial is None:
self._log("Failed to autodetect serial port")
self._errorValue = 'Failed to autodetect serial port.'
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
return False
elif self._port == 'VIRTUAL':
self._changeState(self.STATE_OPEN_SERIAL)
self._serial = VirtualPrinter()
else:
self._changeState(self.STATE_OPEN_SERIAL)
try:
self._log("Connecting to: %s" % self._port)
if self._baudrate == 0:
self._serial = serial.Serial(str(self._port), 115200, timeout=0.1, writeTimeout=10000)
else:
self._serial = serial.Serial(str(self._port), self._baudrate, timeout=settings().getFloat(["serial", "timeout", "connection"]), writeTimeout=10000)
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (self._port, getExceptionString()))
self._errorValue = "Failed to open serial port, permissions correct?"
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
return False
return True
def _handleErrors(self, line):
# No matter the state, if we see an error, goto the error state and store the error for reference.
if line.startswith('Error:'):
#Oh YEAH, consistency.
# Marlin reports an MIN/MAX temp error as "Error:x\n: Extruder switched off. MAXTEMP triggered !\n"
# But a bed temp error is reported as "Error: Temperature heated bed switched off. MAXTEMP triggered !!"
# So we can have an extra newline in the most common case. Awesome work people.
if self._regex_minMaxError.match(line):
line = line.rstrip() + self._readline()
#Skip the communication errors, as those get corrected.
if 'checksum mismatch' in line \
or 'Wrong checksum' in line \
or 'Line Number is not Last Line Number' in line \
or 'expected line' in line \
or 'No Line Number with checksum' in line \
or 'No Checksum with line number' in line \
or 'Missing checksum' in line:
pass
elif not self.isError():
self._errorValue = line[6:]
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
return line
def _readline(self):
if self._serial == None:
return None
try:
ret = self._serial.readline()
except:
self._log("Unexpected error while reading serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
return None
if ret == '':
#self._log("Recv: TIMEOUT")
return ''
self._log("Recv: %s" % sanitizeAscii(ret))
return ret
def _sendNext(self):
with self._sendNextLock:
line = self._currentFile.getNext()
if line is None:
if self.isStreaming():
self._sendCommand("M29")
remote = self._currentFile.getRemoteFilename()
payload = {
"local": self._currentFile.getLocalFilename(),
"remote": remote,
"time": self.getPrintTime()
}
self._currentFile = None
self._changeState(self.STATE_OPERATIONAL)
self._callback.mcFileTransferDone(remote)
eventManager().fire(Events.TRANSFER_DONE, payload)
self.refreshSdFiles()
else:
payload = {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation(),
"time": self.getPrintTime(),
"layerCount": self._currentLayer
}
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire(Events.PRINT_DONE, payload)
return
self._sendCommand(line, True)
self._callback.mcProgress()
def _handleResendRequest(self, line):
lineToResend = None
try:
lineToResend = int(line.replace("N:", " ").replace("N", " ").replace(":", " ").split()[-1])
except:
if "rs" in line:
lineToResend = int(line.split()[1])
if lineToResend is not None:
self._resendDelta = self._currentLine - lineToResend
if self._resendDelta > len(self._lastLines) or len(self._lastLines) == 0 or self._resendDelta <= 0:
self._errorValue = "Printer requested line %d but no sufficient history is available, can't resend [Delta: %d, History: %d]" % (lineToResend, self._resendDelta, len(self._lastLines))
self._logger.warn(self._errorValue)
if self.isPrinting():
# abort the print, there's nothing we can do to rescue it now
self._callback.disableMotorsAndHeater()
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
else:
# reset resend delta, we can't do anything about it
self._resendDelta = None
else:
self._resendNextCommand()
def _resendNextCommand(self):
# Make sure we are only handling one sending job at a time
with self._sendingLock:
self._logger.debug("Resending line %d, delta is %d, history log is %s items strong" % (self._currentLine - self._resendDelta, self._resendDelta, len(self._lastLines)))
cmd = self._lastLines[-self._resendDelta]
lineNumber = self._currentLine - self._resendDelta
self._doSendWithChecksum(cmd, lineNumber)
self._resendDelta -= 1
if self._resendDelta <= 0:
self._resendDelta = None
def _sendCommand(self, cmd, sendChecksum=False):
# Make sure we are only handling one sending job at a time
with self._sendingLock:
if self._serial is None:
return
if not self.isStreaming():
gcode = self._regex_command.search(cmd)
if gcode:
gcode = gcode.group(1)
if gcode in gcodeToEvent:
eventManager().fire(gcodeToEvent[gcode])
gcodeHandler = "_gcode_" + gcode
if hasattr(self, gcodeHandler):
cmd = getattr(self, gcodeHandler)(cmd)
if cmd is not None:
self._doSend(cmd, sendChecksum)
def _doSend(self, cmd, sendChecksum=False):
if sendChecksum or self._alwaysSendChecksum:
lineNumber = self._currentLine
self._addToLastLines(cmd)
self._currentLine += 1
self._doSendWithChecksum(cmd, lineNumber)
else:
self._doSendWithoutChecksum(cmd)
def _doSendWithChecksum(self, cmd, lineNumber):
self._logger.debug("Sending cmd '%s' with lineNumber %r" % (cmd, lineNumber))
commandToSend = "N%d %s" % (lineNumber, cmd)
checksum = reduce(lambda x,y:x^y, map(ord, commandToSend))
commandToSend = "%s*%d" % (commandToSend, checksum)
self._doSendWithoutChecksum(commandToSend)
def _doSendWithoutChecksum(self, cmd):
self._log("Send: %s" % cmd)
try:
self._serial.write(cmd + '\n')
except serial.SerialTimeoutException:
self._log("Serial timeout while writing to serial port, trying again.")
try:
self._serial.write(cmd + '\n')
except:
self._log("Unexpected error while writing serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
except:
self._log("Unexpected error while writing serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
def _gcode_T(self, cmd):
toolMatch = self._regex_paramTInt.search(cmd)
if toolMatch:
self._currentExtruder = int(toolMatch.group(1))
return cmd
def _gcode_G0(self, cmd):
if 'Z' in cmd:
match = self._regex_paramZFloat.search(cmd)
if match:
try:
z = float(match.group(1))
if self._currentZ != z:
self._currentZ = z
self._callback.mcZChange(z)
except ValueError:
pass
elif self._state == self.STATE_PRINTING and self._currentZ != self._lastLayerHeight and self._regex_extrusion.search(cmd) != None:
if self._currentZ > self._lastLayerHeight:
self._currentLayer += 1
self._callback.mcLayerChange(self._currentLayer)
self._lastLayerHeight = self._currentZ
return cmd
_gcode_G1 = _gcode_G0
def _gcode_M0(self, cmd):
self.setPause(True)
return "M105" # Don't send the M0 or M1 to the machine, as M0 and M1 are handled as an LCD menu pause.
_gcode_M1 = _gcode_M0
def _gcode_M104(self, cmd):
toolNum = self._currentExtruder
toolMatch = self._regex_paramTInt.search(cmd)
if toolMatch:
toolNum = int(toolMatch.group(1))
match = self._regex_paramSInt.search(cmd)
if match:
try:
target = float(match.group(1))
if toolNum in self._temp.keys() and self._temp[toolNum] is not None and isinstance(self._temp[toolNum], tuple):
(actual, oldTarget) = self._temp[toolNum]
self._temp[toolNum] = (actual, target)
else:
self._temp[toolNum] = (None, target)
except ValueError:
pass
return cmd
def _gcode_M140(self, cmd):
match = self._regex_paramSInt.search(cmd)
if match:
try:
target = float(match.group(1))
if self._bedTemp is not None and isinstance(self._bedTemp, tuple):
(actual, oldTarget) = self._bedTemp
self._bedTemp = (actual, target)
else:
self._bedTemp = (None, target)
except ValueError:
pass
return cmd
def _gcode_M109(self, cmd):
self._heatingUp = True
self._callback.mcHeatingUpUpdate(self._heatingUp)
self._heatupWaitStartTime = time.time()
return self._gcode_M104(cmd)
def _gcode_M190(self, cmd):
self._heatingUp = True
self._callback.mcHeatingUpUpdate(self._heatingUp)
self._heatupWaitStartTime = time.time()
return self._gcode_M140(cmd)
def _gcode_M110(self, cmd):
newLineNumber = None
match = self._regex_paramNInt.search(cmd)
if match:
try:
newLineNumber = int(match.group(1))
except:
pass
else:
newLineNumber = 0
# send M110 command with new line number
self._doSendWithChecksum(cmd, newLineNumber)
self._currentLine = newLineNumber + 1
# after a reset of the line number we have no way to determine what line exactly the printer now wants
self._lastLines.clear()
self._resendDelta = None
return None
def _gcode_M112(self, cmd): # It's an emergency what todo? Canceling the print should be the minimum
self.cancelPrint()
return cmd
def _gcode_M112(self, cmd): # It's an emergency what todo? Canceling the print should be the minimum
self.cancelPrint()
return cmd
class MachineCom(object):
STATE_NONE = 0
STATE_OPEN_SERIAL = 1
STATE_DETECT_SERIAL = 2
STATE_DETECT_BAUDRATE = 3
STATE_CONNECTING = 4
STATE_OPERATIONAL = 5
STATE_PRINTING = 6
STATE_PAUSED = 7
STATE_CLOSED = 8
STATE_ERROR = 9
STATE_CLOSED_WITH_ERROR = 10
STATE_TRANSFERING_FILE = 11
def __init__(self, port = None, baudrate = None, callbackObject = None):
self._logger = logging.getLogger(__name__)
self._serialLogger = logging.getLogger("SERIAL")
if port == None:
port = settings().get(["serial", "port"])
if baudrate == None:
settingsBaudrate = settings().getInt(["serial", "baudrate"])
if settingsBaudrate is None:
baudrate = 0
else:
baudrate = settingsBaudrate
if callbackObject == None:
callbackObject = MachineComPrintCallback()
self._port = port
self._baudrate = baudrate
self._callback = callbackObject
self._state = self.STATE_NONE
self._serial = None
self._baudrateDetectList = baudrateList()
self._baudrateDetectRetry = 0
self._temp = {}
self._tempOffset = {}
self._bedTemp = None
self._bedTempOffset = 0
self._commandQueue = queue.Queue()
self._currentZ = None
self._heatupWaitStartTime = 0
self._heatupWaitTimeLost = 0.0
self._currentExtruder = 0
self._alwaysSendChecksum = settings().getBoolean(["feature", "alwaysSendChecksum"])
self._currentLine = 1
self._resendDelta = None
self._lastLines = deque([], 50)
# SD status data
self._sdAvailable = False
self._sdFileList = False
self._sdFiles = []
# print job
self._currentFile = None
# regexes
floatPattern = "[-+]?[0-9]*\.?[0-9]+"
positiveFloatPattern = "[+]?[0-9]*\.?[0-9]+"
intPattern = "\d+"
self._regex_command = re.compile("^\s*([GM]\d+|T)")
self._regex_float = re.compile(floatPattern)
self._regex_paramZFloat = re.compile("Z(%s)" % floatPattern)
self._regex_paramSInt = re.compile("S(%s)" % intPattern)
self._regex_paramNInt = re.compile("N(%s)" % intPattern)
self._regex_paramTInt = re.compile("T(%s)" % intPattern)
self._regex_minMaxError = re.compile("Error:[0-9]\n")
self._regex_sdPrintingByte = re.compile("([0-9]*)/([0-9]*)")
self._regex_sdFileOpened = re.compile("File opened:\s*(.*?)\s+Size:\s*(%s)" % intPattern)
# Regex matching temperature entries in line. Groups will be as follows:
# - 1: whole tool designator incl. optional toolNumber ("T", "Tn", "B")
# - 2: toolNumber, if given ("", "n", "")
# - 3: actual temperature
# - 4: whole target substring, if given (e.g. " / 22.0")
# - 5: target temperature
self._regex_temp = re.compile("(B|T(\d*)):\s*(%s)(\s*\/?\s*(%s))?" % (positiveFloatPattern, positiveFloatPattern))
self._regex_repetierTempExtr = re.compile("TargetExtr([0-9]+):(%s)" % positiveFloatPattern)
self._regex_repetierTempBed = re.compile("TargetBed:(%s)" % positiveFloatPattern)
# multithreading locks
self._sendNextLock = threading.Lock()
self._sendingLock = threading.Lock()
# monitoring thread
self.thread = threading.Thread(target=self._monitor)
self.thread.daemon = True
self.thread.start()
def __del__(self):
self.close()
##~~ internal state management
def _changeState(self, newState):
if self._state == newState:
return
if newState == self.STATE_CLOSED or newState == self.STATE_CLOSED_WITH_ERROR:
if settings().get(["feature", "sdSupport"]):
self._sdFileList = False
self._sdFiles = []
self._callback.mcSdFiles([])
oldState = self.getStateString()
self._state = newState
self._log('Changing monitoring state from \'%s\' to \'%s\'' % (oldState, self.getStateString()))
self._callback.mcStateChange(newState)
def _log(self, message):
self._callback.mcLog(message)
self._serialLogger.debug(message)
def _addToLastLines(self, cmd):
self._lastLines.append(cmd)
self._logger.debug("Got %d lines of history in memory" % len(self._lastLines))
##~~ getters
def getState(self):
return self._state
def getStateString(self):
if self._state == self.STATE_NONE:
return "Offline"
if self._state == self.STATE_OPEN_SERIAL:
return "Opening serial port"
if self._state == self.STATE_DETECT_SERIAL:
return "Detecting serial port"
if self._state == self.STATE_DETECT_BAUDRATE:
return "Detecting baudrate"
if self._state == self.STATE_CONNECTING:
return "Connecting"
if self._state == self.STATE_OPERATIONAL:
return "Operational"
if self._state == self.STATE_PRINTING:
if self.isSdFileSelected():
return "Printing from SD"
elif self.isStreaming():
return "Sending file to SD"
else:
return "Printing"
if self._state == self.STATE_PAUSED:
return "Paused"
if self._state == self.STATE_CLOSED:
return "Closed"
if self._state == self.STATE_ERROR:
return "Error: %s" % (self.getErrorString())
if self._state == self.STATE_CLOSED_WITH_ERROR:
return "Error: %s" % (self.getErrorString())
if self._state == self.STATE_TRANSFERING_FILE:
return "Transfering file to SD"
return "?%d?" % (self._state)
def getErrorString(self):
return self._errorValue
def isClosedOrError(self):
return self._state == self.STATE_ERROR or self._state == self.STATE_CLOSED_WITH_ERROR or self._state == self.STATE_CLOSED
def isError(self):
return self._state == self.STATE_ERROR or self._state == self.STATE_CLOSED_WITH_ERROR
def isOperational(self):
return self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PRINTING or self._state == self.STATE_PAUSED or self._state == self.STATE_TRANSFERING_FILE
def isPrinting(self):
return self._state == self.STATE_PRINTING
def isSdPrinting(self):
return self.isSdFileSelected() and self.isPrinting()
def isSdFileSelected(self):
return self._currentFile is not None and isinstance(self._currentFile, PrintingSdFileInformation)
def isStreaming(self):
return self._currentFile is not None and isinstance(self._currentFile, StreamingGcodeFileInformation)
def isPaused(self):
return self._state == self.STATE_PAUSED
def isBusy(self):
return self.isPrinting() or self.isPaused()
def isSdReady(self):
return self._sdAvailable
def getPrintProgress(self):
if self._currentFile is None:
return None
return self._currentFile.getProgress()
def getPrintFilepos(self):
if self._currentFile is None:
return None
return self._currentFile.getFilepos()
def getPrintTime(self):
if self._currentFile is None or self._currentFile.getStartTime() is None:
return None
else:
return time.time() - self._currentFile.getStartTime()
def getPrintTimeRemainingEstimate(self):
printTime = self.getPrintTime()
if printTime is None:
return None
printTime /= 60
progress = self._currentFile.getProgress()
if progress:
printTimeTotal = printTime / progress
return printTimeTotal - printTime
else:
return None
def getTemp(self):
return self._temp
def getBedTemp(self):
return self._bedTemp
def getOffsets(self):
return self._tempOffset, self._bedTempOffset
def getConnection(self):
return self._port, self._baudrate
##~~ external interface
def close(self, isError = False):
printing = self.isPrinting() or self.isPaused()
if self._serial is not None:
if isError:
self._changeState(self.STATE_CLOSED_WITH_ERROR)
else:
self._changeState(self.STATE_CLOSED)
self._serial.close()
self._serial = None
if settings().get(["feature", "sdSupport"]):
self._sdFileList = []
if printing:
payload = None
if self._currentFile is not None:
payload = {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation()
}
eventManager().fire(Events.PRINT_FAILED, payload)
eventManager().fire(Events.DISCONNECTED)
def setTemperatureOffset(self, tool=None, bed=None):
if tool is not None:
self._tempOffset = tool
if bed is not None:
self._bedTempOffset = bed
def sendCommand(self, cmd):
cmd = cmd.encode('ascii', 'replace')
if self.isPrinting() and not self.isSdFileSelected():
self._commandQueue.put(cmd)
elif self.isOperational():
self._sendCommand(cmd)
def startPrint(self):
if not self.isOperational() or self.isPrinting():
return
if self._currentFile is None:
raise ValueError("No file selected for printing")
try:
self._currentFile.start()
wasPaused = self.isPaused()
self._changeState(self.STATE_PRINTING)
eventManager().fire(Events.PRINT_STARTED, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation()
})
if self.isSdFileSelected():
if wasPaused:
self.sendCommand("M26 S0")
self._currentFile.setFilepos(0)
self.sendCommand("M24")
else:
self._sendNext()
except:
self._errorValue = getExceptionString()
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
def startFileTransfer(self, filename, localFilename, remoteFilename):
if not self.isOperational() or self.isBusy():
logging.info("Printer is not operation or busy")
return
self._currentFile = StreamingGcodeFileInformation(filename, localFilename, remoteFilename)
self._currentFile.start()
self.sendCommand("M28 %s" % remoteFilename)
eventManager().fire(Events.TRANSFER_STARTED, {"local": localFilename, "remote": remoteFilename})
self._callback.mcFileTransferStarted(remoteFilename, self._currentFile.getFilesize())
def selectFile(self, filename, sd):
if self.isBusy():
return
if sd:
if not self.isOperational():
# printer is not connected, can't use SD
return
self.sendCommand("M23 %s" % filename)
else:
self._currentFile = PrintingGcodeFileInformation(filename, self.getOffsets)
eventManager().fire(Events.FILE_SELECTED, {
"file": self._currentFile.getFilename(),
"origin": self._currentFile.getFileLocation()
})
self._callback.mcFileSelected(filename, self._currentFile.getFilesize(), False)
def unselectFile(self):
if self.isBusy():
return
self._currentFile = None
eventManager().fire(Events.FILE_DESELECTED)
self._callback.mcFileSelected(None, None, False)
def cancelPrint(self):
if not self.isOperational() or self.isStreaming():
return
self._changeState(self.STATE_OPERATIONAL)
if self.isSdFileSelected():
self.sendCommand("M25") # pause print
self.sendCommand("M26 S0") # reset position in file to byte 0
eventManager().fire(Events.PRINT_CANCELLED, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation()
})
def setPause(self, pause):
if self.isStreaming():
return
if not pause and self.isPaused():
self._changeState(self.STATE_PRINTING)
if self.isSdFileSelected():
self.sendCommand("M24")
else:
self._sendNext()
eventManager().fire(Events.PRINT_RESUMED, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation()
})
elif pause and self.isPrinting():
self._changeState(self.STATE_PAUSED)
if self.isSdFileSelected():
self.sendCommand("M25") # pause print
eventManager().fire(Events.PRINT_PAUSED, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation()
})
def getSdFiles(self):
return self._sdFiles
def startSdFileTransfer(self, filename):
if not self.isOperational() or self.isBusy():
return
self._changeState(self.STATE_TRANSFERING_FILE)
self.sendCommand("M28 %s" % filename.lower())
def endSdFileTransfer(self, filename):
if not self.isOperational() or self.isBusy():
return
self.sendCommand("M29 %s" % filename.lower())
self._changeState(self.STATE_OPERATIONAL)
self.refreshSdFiles()
def deleteSdFile(self, filename):
if not self.isOperational() or (self.isBusy() and
isinstance(self._currentFile, PrintingSdFileInformation) and
self._currentFile.getFilename() == filename):
# do not delete a file from sd we are currently printing from
return
self.sendCommand("M30 %s" % filename.lower())
self.refreshSdFiles()
def refreshSdFiles(self):
if not self.isOperational() or self.isBusy():
return
self.sendCommand("M20")
def initSdCard(self):
if not self.isOperational():
return
self.sendCommand("M21")
if settings().getBoolean(["feature", "sdAlwaysAvailable"]):
self._sdAvailable = True
self.refreshSdFiles()
self._callback.mcSdStateChange(self._sdAvailable)
def releaseSdCard(self):
if not self.isOperational() or (self.isBusy() and self.isSdFileSelected()):
# do not release the sd card if we are currently printing from it
return
self.sendCommand("M22")
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
self._callback.mcSdFiles(self._sdFiles)
##~~ communication monitoring and handling
def _parseTemperatures(self, line):
result = {}
maxToolNum = 0
for match in re.finditer(self._regex_temp, line):
tool = match.group(1)
toolNumber = int(match.group(2)) if match.group(2) and len(match.group(2)) > 0 else None
if toolNumber > maxToolNum:
maxToolNum = toolNumber
try:
actual = float(match.group(3))
target = None
if match.group(4) and match.group(5):
target = float(match.group(5))
result[tool] = (toolNumber, actual, target)
except ValueError:
# catch conversion issues, we'll rather just not get the temperature update instead of killing the connection
pass
if "T0" in result.keys() and "T" in result.keys():
del result["T"]
return maxToolNum, result
def _processTemperatures(self, line):
maxToolNum, parsedTemps = self._parseTemperatures(line)
# extruder temperatures
if not "T0" in parsedTemps.keys() and "T" in parsedTemps.keys():
# only single reporting, "T" is our one and only extruder temperature
toolNum, actual, target = parsedTemps["T"]
if target is not None:
self._temp[0] = (actual, target)
elif 0 in self._temp.keys() and self._temp[0] is not None and isinstance(self._temp[0], tuple):
(oldActual, oldTarget) = self._temp[0]
self._temp[0] = (actual, oldTarget)
else:
self._temp[0] = (actual, None)
elif "T0" in parsedTemps.keys():
for n in range(maxToolNum + 1):
tool = "T%d" % n
if not tool in parsedTemps.keys():
continue
toolNum, actual, target = parsedTemps[tool]
if target is not None:
self._temp[toolNum] = (actual, target)
elif toolNum in self._temp.keys() and self._temp[toolNum] is not None and isinstance(self._temp[toolNum], tuple):
(oldActual, oldTarget) = self._temp[toolNum]
self._temp[toolNum] = (actual, oldTarget)
else:
self._temp[toolNum] = (actual, None)
# bed temperature
if "B" in parsedTemps.keys():
toolNum, actual, target = parsedTemps["B"]
if target is not None:
self._bedTemp = (actual, target)
elif self._bedTemp is not None and isinstance(self._bedTemp, tuple):
(oldActual, oldTarget) = self._bedTemp
self._bedTemp = (actual, oldTarget)
else:
self._bedTemp = (actual, None)
def _monitor(self):
feedbackControls = settings().getFeedbackControls()
pauseTriggers = settings().getPauseTriggers()
feedbackErrors = []
#Open the serial port.
if not self._openSerial():
return
self._log("Connected to: %s, starting monitor" % self._serial)
if self._baudrate == 0:
self._log("Starting baud rate detection")
self._changeState(self.STATE_DETECT_BAUDRATE)
else:
self._changeState(self.STATE_CONNECTING)
#Start monitoring the serial port.
timeout = getNewTimeout("communication")
tempRequestTimeout = getNewTimeout("temperature")
sdStatusRequestTimeout = getNewTimeout("sdStatus")
startSeen = not settings().getBoolean(["feature", "waitForStartOnConnect"])
heatingUp = False
swallowOk = False
supportRepetierTargetTemp = settings().getBoolean(["feature", "repetierTargetTemp"])
while True:
try:
line = self._readline()
if line is None:
break
if line.strip() is not "":
timeout = getNewTimeout("communication")
##~~ Error handling
line = self._handleErrors(line)
##~~ SD file list
# if we are currently receiving an sd file list, each line is just a filename, so just read it and abort processing
if self._sdFileList and isGcodeFileName(line.strip().lower()) and not 'End file list' in line:
filename = line.strip().lower()
if filterNonAscii(filename):
self._logger.warn("Got a file from printer's SD that has a non-ascii filename (%s), that shouldn't happen according to the protocol" % filename)
else:
self._sdFiles.append(filename)
continue
##~~ Temperature processing
if ' T:' in line or line.startswith('T:') or ' T0:' in line or line.startswith('T0:'):
self._processTemperatures(line)
self._callback.mcTempUpdate(self._temp, self._bedTemp)
#If we are waiting for an M109 or M190 then measure the time we lost during heatup, so we can remove that time from our printing time estimate.
if not 'ok' in line:
heatingUp = True
if self._heatupWaitStartTime != 0:
t = time.time()
self._heatupWaitTimeLost = t - self._heatupWaitStartTime
self._heatupWaitStartTime = t
elif supportRepetierTargetTemp:
matchExtr = self._regex_repetierTempExtr.match(line)
matchBed = self._regex_repetierTempBed.match(line)
if matchExtr is not None:
toolNum = int(matchExtr.group(1))
try:
target = float(matchExtr.group(2))
if toolNum in self._temp.keys() and self._temp[toolNum] is not None and isinstance(self._temp[toolNum], tuple):
(actual, oldTarget) = self._temp[toolNum]
self._temp[toolNum] = (actual, target)
else:
self._temp[toolNum] = (None, target)
self._callback.mcTempUpdate(self._temp, self._bedTemp)
except ValueError:
pass
elif matchBed is not None:
try:
target = float(matchBed.group(1))
if self._bedTemp is not None and isinstance(self._bedTemp, tuple):
(actual, oldTarget) = self._bedTemp
self._bedTemp = (actual, target)
else:
self._bedTemp = (None, target)
self._callback.mcTempUpdate(self._temp, self._bedTemp)
except ValueError:
pass
##~~ SD Card handling
elif 'SD init fail' in line or 'volume.init failed' in line or 'openRoot failed' in line:
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Not SD printing' in line:
if self.isSdFileSelected() and self.isPrinting():
# something went wrong, printer is reporting that we actually are not printing right now...
self._sdFilePos = 0
self._changeState(self.STATE_OPERATIONAL)
elif 'SD card ok' in line and not self._sdAvailable:
self._sdAvailable = True
self.refreshSdFiles()
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Begin file list' in line:
self._sdFiles = []
self._sdFileList = True
elif 'End file list' in line:
self._sdFileList = False
self._callback.mcSdFiles(self._sdFiles)
elif 'SD printing byte' in line:
# answer to M27, at least on Marlin, Repetier and Sprinter: "SD printing byte %d/%d"
match = self._regex_sdPrintingByte.search(line)
self._currentFile.setFilepos(int(match.group(1)))
self._callback.mcProgress()
elif 'File opened' in line:
# answer to M23, at least on Marlin, Repetier and Sprinter: "File opened:%s Size:%d"
match = self._regex_sdFileOpened.search(line)
self._currentFile = PrintingSdFileInformation(match.group(1), int(match.group(2)))
elif 'File selected' in line:
# final answer to M23, at least on Marlin, Repetier and Sprinter: "File selected"
if self._currentFile is not None:
self._callback.mcFileSelected(self._currentFile.getFilename(), self._currentFile.getFilesize(), True)
eventManager().fire(Events.FILE_SELECTED, {
"file": self._currentFile.getFilename(),
"origin": self._currentFile.getFileLocation()
})
elif 'Writing to file' in line:
# anwer to M28, at least on Marlin, Repetier and Sprinter: "Writing to file: %s"
self._printSection = "CUSTOM"
self._changeState(self.STATE_PRINTING)
line = "ok"
elif 'Done printing file' in line:
# printer is reporting file finished printing
self._sdFilePos = 0
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire(Events.PRINT_DONE, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation(),
"time": self.getPrintTime()
})
elif 'Done saving file' in line:
self.refreshSdFiles()
##~~ Message handling
elif line.strip() != '' \
and line.strip() != 'ok' and not line.startswith("wait") \
and not line.startswith('Resend:') \
and line != 'echo:Unknown command:""\n' \
and self.isOperational():
self._callback.mcMessage(line)
##~~ Parsing for feedback commands
if feedbackControls:
for name, matcher, template in feedbackControls:
if name in feedbackErrors:
# we previously had an error with that one, so we'll skip it now
continue
try:
match = matcher.search(line)
if match is not None:
formatFunction = None
if isinstance(template, str):
formatFunction = str.format
elif isinstance(template, unicode):
formatFunction = unicode.format
if formatFunction is not None:
self._callback.mcReceivedRegisteredMessage(name, formatFunction(template, *(match.groups("n/a"))))
except:
if not name in feedbackErrors:
self._logger.info("Something went wrong with feedbackControl \"%s\": " % name, exc_info=True)
feedbackErrors.append(name)
pass
##~~ Parsing for pause triggers
if pauseTriggers and not self.isStreaming():
if "enable" in pauseTriggers.keys() and pauseTriggers["enable"].search(line) is not None:
self.setPause(True)
elif "disable" in pauseTriggers.keys() and pauseTriggers["disable"].search(line) is not None:
self.setPause(False)
elif "toggle" in pauseTriggers.keys() and pauseTriggers["toggle"].search(line) is not None:
self.setPause(not self.isPaused())
if "ok" in line and heatingUp:
heatingUp = False
### Baudrate detection
if self._state == self.STATE_DETECT_BAUDRATE:
if line == '' or time.time() > timeout:
if len(self._baudrateDetectList) < 1:
self.close()
self._errorValue = "No more baudrates to test, and no suitable baudrate found."
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
elif self._baudrateDetectRetry > 0:
self._baudrateDetectRetry -= 1
self._serial.write('\n')
self._log("Baudrate test retry: %d" % (self._baudrateDetectRetry))
self._sendCommand("M105")
self._testingBaudrate = True
else:
baudrate = self._baudrateDetectList.pop(0)
try:
self._serial.baudrate = baudrate
self._serial.timeout = settings().getFloat(["serial", "timeout", "detection"])
self._log("Trying baudrate: %d" % (baudrate))
self._baudrateDetectRetry = 5
self._baudrateDetectTestOk = 0
timeout = getNewTimeout("communication")
self._serial.write('\n')
self._sendCommand("M105")
self._testingBaudrate = True
except:
self._log("Unexpected error while setting baudrate: %d %s" % (baudrate, getExceptionString()))
elif 'ok' in line and 'T:' in line:
self._baudrateDetectTestOk += 1
if self._baudrateDetectTestOk < 10:
self._log("Baudrate test ok: %d" % (self._baudrateDetectTestOk))
self._sendCommand("M105")
else:
self._sendCommand("M999")
self._serial.timeout = settings().getFloat(["serial", "timeout", "connection"])
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
else:
self.initSdCard()
eventManager().fire(Events.CONNECTED, {"port": self._port, "baudrate": self._baudrate})
else:
self._testingBaudrate = False
### Connection attempt
elif self._state == self.STATE_CONNECTING:
if (line == "" or "wait" in line) and startSeen:
self._sendCommand("M105")
elif "start" in line:
startSeen = True
elif "ok" in line and startSeen:
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
else:
self.initSdCard()
eventManager().fire(Events.CONNECTED, {"port": self._port, "baudrate": self._baudrate})
elif time.time() > timeout:
self.close()
### Operational
elif self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PAUSED:
#Request the temperature on comm timeout (every 5 seconds) when we are not printing.
if line == "" or "wait" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty():
self._sendCommand(self._commandQueue.get())
else:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("temperature")
# resend -> start resend procedure from requested line
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
### Printing
elif self._state == self.STATE_PRINTING:
if line == "" and time.time() > timeout:
self._log("Communication timeout during printing, forcing a line")
line = 'ok'
if self.isSdPrinting():
if time.time() > tempRequestTimeout and not heatingUp:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("temperature")
if time.time() > sdStatusRequestTimeout and not heatingUp:
self._sendCommand("M27")
sdStatusRequestTimeout = getNewTimeout("sdStatus")
else:
# Even when printing request the temperature every 5 seconds.
if time.time() > tempRequestTimeout and not self.isStreaming():
self._commandQueue.put("M105")
tempRequestTimeout = getNewTimeout("temperature")
if "ok" in line and swallowOk:
swallowOk = False
elif "ok" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty() and not self.isStreaming():
self._sendCommand(self._commandQueue.get())
else:
self._sendNext()
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
except:
self._logger.exception("Something crashed inside the serial connection loop, please report this in OctoPrint's bug tracker:")
errorMsg = "See octoprint.log for details"
self._log(errorMsg)
self._errorValue = errorMsg
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
self._log("Connection closed, closing down monitor")
def _openSerial(self):
if self._port == 'AUTO':
self._changeState(self.STATE_DETECT_SERIAL)
programmer = stk500v2.Stk500v2()
self._log("Serial port list: %s" % (str(serialList())))
for p in serialList():
try:
self._log("Connecting to: %s" % (p))
programmer.connect(p)
self._serial = programmer.leaveISP()
break
except ispBase.IspError as (e):
self._log("Error while connecting to %s: %s" % (p, str(e)))
pass
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (p, getExceptionString()))
programmer.close()
if self._serial is None:
self._log("Failed to autodetect serial port")
self._errorValue = 'Failed to autodetect serial port.'
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
return False
elif self._port == 'VIRTUAL':
self._changeState(self.STATE_OPEN_SERIAL)
self._serial = VirtualPrinter()
else:
self._changeState(self.STATE_OPEN_SERIAL)
try:
self._log("Connecting to: %s" % self._port)
if self._baudrate == 0:
self._serial = serial.Serial(str(self._port), 115200, timeout=0.1, writeTimeout=10000)
else:
self._serial = serial.Serial(str(self._port), self._baudrate, timeout=settings().getFloat(["serial", "timeout", "connection"]), writeTimeout=10000)
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (self._port, getExceptionString()))
self._errorValue = "Failed to open serial port, permissions correct?"
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
return False
return True
def _handleErrors(self, line):
# No matter the state, if we see an error, goto the error state and store the error for reference.
if line.startswith('Error:'):
#Oh YEAH, consistency.
# Marlin reports an MIN/MAX temp error as "Error:x\n: Extruder switched off. MAXTEMP triggered !\n"
# But a bed temp error is reported as "Error: Temperature heated bed switched off. MAXTEMP triggered !!"
# So we can have an extra newline in the most common case. Awesome work people.
if self._regex_minMaxError.match(line):
line = line.rstrip() + self._readline()
#Skip the communication errors, as those get corrected.
if 'checksum mismatch' in line \
or 'Wrong checksum' in line \
or 'Line Number is not Last Line Number' in line \
or 'expected line' in line \
or 'No Line Number with checksum' in line \
or 'No Checksum with line number' in line \
or 'Missing checksum' in line:
pass
elif not self.isError():
self._errorValue = line[6:]
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
return line
def _readline(self):
if self._serial == None:
return None
try:
ret = self._serial.readline()
except:
self._log("Unexpected error while reading serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
return None
if ret == '':
#self._log("Recv: TIMEOUT")
return ''
self._log("Recv: %s" % sanitizeAscii(ret))
return ret
def _sendNext(self):
with self._sendNextLock:
line = self._currentFile.getNext()
if line is None:
if self.isStreaming():
self._sendCommand("M29")
filename = self._currentFile.getFilename()
payload = {
"local": self._currentFile.getLocalFilename(),
"remote": self._currentFile.getRemoteFilename(),
"time": self.getPrintTime()
}
self._currentFile = None
self._changeState(self.STATE_OPERATIONAL)
self._callback.mcFileTransferDone(filename)
eventManager().fire(Events.TRANSFER_DONE, payload)
self.refreshSdFiles()
else:
payload = {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation(),
"time": self.getPrintTime()
}
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire(Events.PRINT_DONE, payload)
return
self._sendCommand(line, True)
self._callback.mcProgress()
def _handleResendRequest(self, line):
lineToResend = None
try:
lineToResend = int(line.replace("N:", " ").replace("N", " ").replace(":", " ").split()[-1])
except:
if "rs" in line:
lineToResend = int(line.split()[1])
if lineToResend is not None:
self._resendDelta = self._currentLine - lineToResend
if self._resendDelta > len(self._lastLines) or len(self._lastLines) == 0 or self._resendDelta <= 0:
self._errorValue = "Printer requested line %d but no sufficient history is available, can't resend" % lineToResend
self._logger.warn(self._errorValue)
if self.isPrinting():
# abort the print, there's nothing we can do to rescue it now
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
else:
# reset resend delta, we can't do anything about it
self._resendDelta = None
else:
self._resendNextCommand()
def _resendNextCommand(self):
# Make sure we are only handling one sending job at a time
with self._sendingLock:
self._logger.debug("Resending line %d, delta is %d, history log is %s items strong" % (self._currentLine - self._resendDelta, self._resendDelta, len(self._lastLines)))
cmd = self._lastLines[-self._resendDelta]
lineNumber = self._currentLine - self._resendDelta
self._doSendWithChecksum(cmd, lineNumber)
self._resendDelta -= 1
if self._resendDelta <= 0:
self._resendDelta = None
def _sendCommand(self, cmd, sendChecksum=False):
# Make sure we are only handling one sending job at a time
with self._sendingLock:
if self._serial is None:
return
if not self.isStreaming():
gcode = self._regex_command.search(cmd)
if gcode:
gcode = gcode.group(1)
if gcode in gcodeToEvent:
eventManager().fire(gcodeToEvent[gcode])
gcodeHandler = "_gcode_" + gcode
if hasattr(self, gcodeHandler):
cmd = getattr(self, gcodeHandler)(cmd)
if cmd is not None:
self._doSend(cmd, sendChecksum)
def _doSend(self, cmd, sendChecksum=False):
if sendChecksum or self._alwaysSendChecksum:
lineNumber = self._currentLine
self._addToLastLines(cmd)
self._currentLine += 1
self._doSendWithChecksum(cmd, lineNumber)
else:
self._doSendWithoutChecksum(cmd)
def _doSendWithChecksum(self, cmd, lineNumber):
self._logger.debug("Sending cmd '%s' with lineNumber %r" % (cmd, lineNumber))
commandToSend = "N%d %s" % (lineNumber, cmd)
checksum = reduce(lambda x,y:x^y, map(ord, commandToSend))
commandToSend = "%s*%d" % (commandToSend, checksum)
self._doSendWithoutChecksum(commandToSend)
def _doSendWithoutChecksum(self, cmd):
self._log("Send: %s" % cmd)
try:
self._serial.write(cmd + '\n')
except serial.SerialTimeoutException:
self._log("Serial timeout while writing to serial port, trying again.")
try:
self._serial.write(cmd + '\n')
except:
self._log("Unexpected error while writing serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
except:
self._log("Unexpected error while writing serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
def _gcode_T(self, cmd):
toolMatch = self._regex_paramTInt.search(cmd)
if toolMatch:
self._currentExtruder = int(toolMatch.group(1))
return cmd
def _gcode_G0(self, cmd):
if 'Z' in cmd:
match = self._regex_paramZFloat.search(cmd)
if match:
try:
z = float(match.group(1))
if self._currentZ != z:
self._currentZ = z
self._callback.mcZChange(z)
except ValueError:
pass
return cmd
_gcode_G1 = _gcode_G0
def _gcode_M0(self, cmd):
self.setPause(True)
return "M105" # Don't send the M0 or M1 to the machine, as M0 and M1 are handled as an LCD menu pause.
_gcode_M1 = _gcode_M0
def _gcode_M104(self, cmd):
toolNum = self._currentExtruder
toolMatch = self._regex_paramTInt.search(cmd)
if toolMatch:
toolNum = int(toolMatch.group(1))
match = self._regex_paramSInt.search(cmd)
if match:
try:
target = float(match.group(1))
if toolNum in self._temp.keys() and self._temp[toolNum] is not None and isinstance(self._temp[toolNum], tuple):
(actual, oldTarget) = self._temp[toolNum]
self._temp[toolNum] = (actual, target)
else:
self._temp[toolNum] = (None, target)
except ValueError:
pass
return cmd
def _gcode_M140(self, cmd):
match = self._regex_paramSInt.search(cmd)
if match:
try:
target = float(match.group(1))
if self._bedTemp is not None and isinstance(self._bedTemp, tuple):
(actual, oldTarget) = self._bedTemp
self._bedTemp = (actual, target)
else:
self._bedTemp = (None, target)
except ValueError:
pass
return cmd
def _gcode_M109(self, cmd):
self._heatupWaitStartTime = time.time()
return self._gcode_M104(cmd)
def _gcode_M190(self, cmd):
self._heatupWaitStartTime = time.time()
return self._gcode_M140(cmd)
def _gcode_M110(self, cmd):
newLineNumber = None
match = self._regex_paramNInt.search(cmd)
if match:
try:
newLineNumber = int(match.group(1))
except:
pass
else:
newLineNumber = 0
# send M110 command with new line number
self._doSendWithChecksum(cmd, newLineNumber)
self._currentLine = newLineNumber + 1
# after a reset of the line number we have no way to determine what line exactly the printer now wants
self._lastLines.clear()
self._resendDelta = None
return None
def _gcode_M112(self, cmd): # It's an emergency what todo? Canceling the print should be the minimum
self.cancelPrint()
return cmd
class MachineCom(object):
STATE_NONE = 0
STATE_OPEN_SERIAL = 1
STATE_DETECT_SERIAL = 2
STATE_DETECT_BAUDRATE = 3
STATE_CONNECTING = 4
STATE_OPERATIONAL = 5
STATE_PRINTING = 6
STATE_PAUSED = 7
STATE_CLOSED = 8
STATE_ERROR = 9
STATE_CLOSED_WITH_ERROR = 10
STATE_TRANSFERING_FILE = 11
def __init__(self, port = None, baudrate = None, callbackObject = None):
self._logger = logging.getLogger(__name__)
self._serialLogger = logging.getLogger("SERIAL")
if port == None:
port = settings().get(["serial", "port"])
if baudrate == None:
settingsBaudrate = settings().getInt(["serial", "baudrate"])
if settingsBaudrate is None:
baudrate = 0
else:
baudrate = settingsBaudrate
if callbackObject == None:
callbackObject = MachineComPrintCallback()
self._port = port
self._baudrate = baudrate
self._callback = callbackObject
self._state = self.STATE_NONE
self._serial = None
self._baudrateDetectList = baudrateList()
self._baudrateDetectRetry = 0
self._temp = 0
self._bedTemp = 0
self._targetTemp = 0
self._bedTargetTemp = 0
self._tempOffset = 0
self._bedTempOffset = 0
self._commandQueue = queue.Queue()
self._currentZ = None
self._heatupWaitStartTime = 0
self._heatupWaitTimeLost = 0.0
self._alwaysSendChecksum = settings().getBoolean(["feature", "alwaysSendChecksum"])
self._currentLine = 1
self._resendDelta = None
self._lastLines = deque([], 50)
# multithreading locks
self._sendNextLock = threading.Lock()
self._sendingLock = threading.Lock()
# monitoring thread
self.thread = threading.Thread(target=self._monitor)
self.thread.daemon = True
self.thread.start()
# SD status data
self._sdAvailable = False
self._sdFileList = False
self._sdFiles = []
# print job
self._currentFile = None
# regexes
floatPattern = "[-+]?[0-9]*\.?[0-9]+"
intPattern = "[0-9]+"
self._regex_command = re.compile("^\s*([GM]\d+)")
self._regex_float = re.compile(floatPattern)
self._regex_paramZFloat = re.compile("Z(%s)" % floatPattern)
self._regex_paramSInt = re.compile("S(%s)" % intPattern)
self._regex_paramNInt = re.compile("N(%s)" % intPattern)
self._regex_minMaxError = re.compile("Error:[0-9]\n")
self._regex_sdPrintingByte = re.compile("([0-9]*)/([0-9]*)")
self._regex_sdFileOpened = re.compile("File opened:\s*(.*?)\s+Size:\s*([0-9]*)")
def __del__(self):
self.close()
##~~ internal state management
def _changeState(self, newState):
if self._state == newState:
return
if newState == self.STATE_CLOSED or newState == self.STATE_CLOSED_WITH_ERROR:
if settings().get(["feature", "sdSupport"]):
self._sdFileList = False
self._sdFiles = []
self._callback.mcSdFiles([])
oldState = self.getStateString()
self._state = newState
self._log('Changing monitoring state from \'%s\' to \'%s\'' % (oldState, self.getStateString()))
self._callback.mcStateChange(newState)
def _log(self, message):
self._callback.mcLog(message)
self._serialLogger.debug(message)
def _addToLastLines(self, cmd):
self._lastLines.append(cmd)
self._logger.debug("Got %d lines of history in memory" % len(self._lastLines))
##~~ getters
def getState(self):
return self._state
def getStateString(self):
if self._state == self.STATE_NONE:
return "Offline"
if self._state == self.STATE_OPEN_SERIAL:
return "Opening serial port"
if self._state == self.STATE_DETECT_SERIAL:
return "Detecting serial port"
if self._state == self.STATE_DETECT_BAUDRATE:
return "Detecting baudrate"
if self._state == self.STATE_CONNECTING:
return "Connecting"
if self._state == self.STATE_OPERATIONAL:
return "Operational"
if self._state == self.STATE_PRINTING:
if self.isSdFileSelected():
return "Printing from SD"
elif self.isStreaming():
return "Sending file to SD"
else:
return "Printing"
if self._state == self.STATE_PAUSED:
return "Paused"
if self._state == self.STATE_CLOSED:
return "Closed"
if self._state == self.STATE_ERROR:
return "Error: %s" % (self.getShortErrorString())
if self._state == self.STATE_CLOSED_WITH_ERROR:
return "Error: %s" % (self.getShortErrorString())
if self._state == self.STATE_TRANSFERING_FILE:
return "Transfering file to SD"
return "?%d?" % (self._state)
def getShortErrorString(self):
if len(self._errorValue) < 20:
return self._errorValue
return self._errorValue[:20] + "..."
def getErrorString(self):
return self._errorValue
def isClosedOrError(self):
return self._state == self.STATE_ERROR or self._state == self.STATE_CLOSED_WITH_ERROR or self._state == self.STATE_CLOSED
def isError(self):
return self._state == self.STATE_ERROR or self._state == self.STATE_CLOSED_WITH_ERROR
def isOperational(self):
return self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PRINTING or self._state == self.STATE_PAUSED or self._state == self.STATE_TRANSFERING_FILE
def isPrinting(self):
return self._state == self.STATE_PRINTING
def isSdPrinting(self):
return self.isSdFileSelected() and self.isPrinting()
def isSdFileSelected(self):
return self._currentFile is not None and isinstance(self._currentFile, PrintingSdFileInformation)
def isStreaming(self):
return self._currentFile is not None and isinstance(self._currentFile, StreamingGcodeFileInformation)
def isPaused(self):
return self._state == self.STATE_PAUSED
def isBusy(self):
return self.isPrinting() or self.isPaused()
def isSdReady(self):
return self._sdAvailable
def getPrintProgress(self):
if self._currentFile is None:
return None
return self._currentFile.getProgress()
def getPrintFilepos(self):
if self._currentFile is None:
return None
return self._currentFile.getFilepos()
def getPrintTime(self):
if self._currentFile is None or self._currentFile.getStartTime() is None:
return None
else:
return time.time() - self._currentFile.getStartTime()
def getPrintTimeRemainingEstimate(self):
printTime = self.getPrintTime()
if printTime is None:
return None
printTime /= 60
progress = self._currentFile.getProgress()
if progress:
printTimeTotal = printTime / progress
return printTimeTotal - printTime
else:
return None
def getTemp(self):
return self._temp
def getBedTemp(self):
return self._bedTemp
def getOffsets(self):
return (self._tempOffset, self._bedTempOffset)
##~~ external interface
def close(self, isError = False):
printing = self.isPrinting() or self.isPaused()
if self._serial is not None:
self._serial.close()
if isError:
self._changeState(self.STATE_CLOSED_WITH_ERROR)
else:
self._changeState(self.STATE_CLOSED)
self._serial = None
if settings().get(["feature", "sdSupport"]):
self._sdFileList = []
if printing:
eventManager().fire("PrintFailed")
eventManager().fire("Disconnected")
def setTemperatureOffset(self, extruder=None, bed=None):
if extruder is not None:
self._tempOffset = extruder
if bed is not None:
self._bedTempOffset = bed
def sendCommand(self, cmd):
cmd = cmd.encode('ascii', 'replace')
if self.isPrinting() and not self.isSdFileSelected():
self._commandQueue.put(cmd)
elif self.isOperational():
self._sendCommand(cmd)
def startPrint(self):
if not self.isOperational() or self.isPrinting():
return
if self._currentFile is None:
raise ValueError("No file selected for printing")
wasPaused = self.isPaused()
try:
self._currentFile.start()
self._changeState(self.STATE_PRINTING)
eventManager().fire("PrintStarted", self._currentFile.getFilename())
if self.isSdFileSelected():
if wasPaused:
self.sendCommand("M26 S0")
self._currentFile.setFilepos(0)
self.sendCommand("M24")
else:
self._sendNext()
except:
self._errorValue = getExceptionString()
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
def startFileTransfer(self, filename, remoteFilename):
if not self.isOperational() or self.isBusy():
logging.info("Printer is not operation or busy")
return
self._currentFile = StreamingGcodeFileInformation(filename)
self._currentFile.start()
self.sendCommand("M28 %s" % remoteFilename)
eventManager().fire("TransferStart", remoteFilename)
self._callback.mcFileTransferStarted(remoteFilename, self._currentFile.getFilesize())
def selectFile(self, filename, sd):
if self.isBusy():
return
if sd:
if not self.isOperational():
# printer is not connected, can't use SD
return
self.sendCommand("M23 %s" % filename)
else:
self._currentFile = PrintingGcodeFileInformation(filename, self.getOffsets)
eventManager().fire("FileSelected", filename)
self._callback.mcFileSelected(filename, self._currentFile.getFilesize(), False)
def unselectFile(self):
if self.isBusy():
return
self._currentFile = None
eventManager().fire("FileSelected", None)
self._callback.mcFileSelected(None, None, False)
def cancelPrint(self):
if not self.isOperational() or self.isStreaming():
return
self._changeState(self.STATE_OPERATIONAL)
if self.isSdFileSelected():
self.sendCommand("M25") # pause print
self.sendCommand("M26 S0") # reset position in file to byte 0
eventManager().fire("PrintCancelled")
def setPause(self, pause):
if self.isStreaming():
return
if not pause and self.isPaused():
self._changeState(self.STATE_PRINTING)
if self.isSdFileSelected():
self.sendCommand("M24")
else:
self._sendNext()
eventManager().fire("PrintResumed", self._currentFile.getFilename())
if pause and self.isPrinting():
self._changeState(self.STATE_PAUSED)
if self.isSdFileSelected():
self.sendCommand("M25") # pause print
eventManager().fire("Paused")
def getSdFiles(self):
return self._sdFiles
def startSdFileTransfer(self, filename):
if not self.isOperational() or self.isBusy():
return
self._changeState(self.STATE_TRANSFERING_FILE)
self.sendCommand("M28 %s" % filename.lower())
def endSdFileTransfer(self, filename):
if not self.isOperational() or self.isBusy():
return
self.sendCommand("M29 %s" % filename.lower())
self._changeState(self.STATE_OPERATIONAL)
self.refreshSdFiles()
def deleteSdFile(self, filename):
if not self.isOperational() or (self.isBusy() and
isinstance(self._currentFile, PrintingSdFileInformation) and
self._currentFile.getFilename() == filename):
# do not delete a file from sd we are currently printing from
return
self.sendCommand("M30 %s" % filename.lower())
self.refreshSdFiles()
def refreshSdFiles(self):
if not self.isOperational() or self.isBusy():
return
self.sendCommand("M20")
def initSdCard(self):
if not self.isOperational():
return
self.sendCommand("M21")
def releaseSdCard(self):
if not self.isOperational() or (self.isBusy() and self.isSdFileSelected()):
# do not release the sd card if we are currently printing from it
return
self.sendCommand("M22")
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
self._callback.mcSdFiles(self._sdFiles)
##~~ communication monitoring and handling
def _monitor(self):
feedbackControls = settings().getFeedbackControls()
pauseTriggers = settings().getPauseTriggers()
feedbackErrors = []
#Open the serial port.
if not self._openSerial():
return
self._log("Connected to: %s, starting monitor" % self._serial)
if self._baudrate == 0:
self._log("Starting baud rate detection")
self._changeState(self.STATE_DETECT_BAUDRATE)
else:
self._changeState(self.STATE_CONNECTING)
#Start monitoring the serial port.
timeout = getNewTimeout("communication")
tempRequestTimeout = timeout
sdStatusRequestTimeout = timeout
startSeen = not settings().getBoolean(["feature", "waitForStartOnConnect"])
heatingUp = False
swallowOk = False
while True:
try:
line = self._readline()
if line is None:
break
##~~ Error handling
line = self._handleErrors(line)
##~~ SD file list
# if we are currently receiving an sd file list, each line is just a filename, so just read it and abort processing
if self._sdFileList and isGcodeFileName(line.strip().lower()) and not 'End file list' in line:
filename = line.strip().lower()
if filterNonAscii(filename):
self._logger.warn("Got a file from printer's SD that has a non-ascii filename (%s), that shouldn't happen according to the protocol" % filename)
else:
self._sdFiles.append(filename)
continue
##~~ Temperature processing
if ' T:' in line or line.startswith('T:'):
try:
self._temp = float(self._regex_float.search(line.split('T:')[1]).group(0))
if ' B:' in line:
self._bedTemp = float(self._regex_float.search(line.split(' B:')[1]).group(0))
self._callback.mcTempUpdate(self._temp, self._bedTemp, self._targetTemp, self._bedTargetTemp)
except ValueError:
# catch conversion issues, we'll rather just not get the temperature update instead of killing the connection
pass
#If we are waiting for an M109 or M190 then measure the time we lost during heatup, so we can remove that time from our printing time estimate.
if not 'ok' in line:
heatingUp = True
if self._heatupWaitStartTime != 0:
t = time.time()
self._heatupWaitTimeLost = t - self._heatupWaitStartTime
self._heatupWaitStartTime = t
##~~ SD Card handling
elif 'SD init fail' in line or 'volume.init failed' in line or 'openRoot failed' in line:
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Not SD printing' in line:
if self.isSdFileSelected() and self.isPrinting():
# something went wrong, printer is reporting that we actually are not printing right now...
self._sdFilePos = 0
self._changeState(self.STATE_OPERATIONAL)
elif 'SD card ok' in line:
self._sdAvailable = True
self.refreshSdFiles()
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Begin file list' in line:
self._sdFiles = []
self._sdFileList = True
elif 'End file list' in line:
self._sdFileList = False
self._callback.mcSdFiles(self._sdFiles)
elif 'SD printing byte' in line:
# answer to M27, at least on Marlin, Repetier and Sprinter: "SD printing byte %d/%d"
match = self._regex_sdPrintingByte.search(line)
self._currentFile.setFilepos(int(match.group(1)))
self._callback.mcProgress()
elif 'File opened' in line:
# answer to M23, at least on Marlin, Repetier and Sprinter: "File opened:%s Size:%d"
match = self._regex_sdFileOpened.search(line)
self._currentFile = PrintingSdFileInformation(match.group(1), int(match.group(2)))
elif 'File selected' in line:
# final answer to M23, at least on Marlin, Repetier and Sprinter: "File selected"
if self._currentFile is not None:
self._callback.mcFileSelected(self._currentFile.getFilename(), self._currentFile.getFilesize(), True)
eventManager().fire("FileSelected", self._currentFile.getFilename())
elif 'Writing to file' in line:
# anwer to M28, at least on Marlin, Repetier and Sprinter: "Writing to file: %s"
self._changeState(self.STATE_PRINTING)
line = "ok"
elif 'Done printing file' in line:
# printer is reporting file finished printing
self._sdFilePos = 0
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire("PrintDone")
elif 'Done saving file' in line:
self.refreshSdFiles()
##~~ Message handling
elif line.strip() != '' \
and line.strip() != 'ok' and not line.startswith("wait") \
and not line.startswith('Resend:') \
and line != 'echo:Unknown command:""\n' \
and self.isOperational():
self._callback.mcMessage(line)
##~~ Parsing for feedback commands
if feedbackControls:
for name, matcher, template in feedbackControls:
if name in feedbackErrors:
# we previously had an error with that one, so we'll skip it now
continue
try:
match = matcher.search(line)
if match is not None:
formatFunction = None
if isinstance(template, str):
formatFunction = str.format
elif isinstance(template, unicode):
formatFunction = unicode.format
if formatFunction is not None:
self._callback.mcReceivedRegisteredMessage(name, formatFunction(template, *(match.groups("n/a"))))
except:
if not name in feedbackErrors:
self._logger.info("Something went wrong with feedbackControl \"%s\": " % name, exc_info=True)
feedbackErrors.append(name)
pass
##~~ Parsing for pause triggers
if pauseTriggers and not self.isStreaming():
if "enable" in pauseTriggers.keys() and pauseTriggers["enable"].search(line) is not None:
self.setPause(True)
elif "disable" in pauseTriggers.keys() and pauseTriggers["disable"].search(line) is not None:
self.setPause(False)
elif "toggle" in pauseTriggers.keys() and pauseTriggers["toggle"].search(line) is not None:
self.setPause(not self.isPaused())
if "ok" in line and heatingUp:
heatingUp = False
### Baudrate detection
if self._state == self.STATE_DETECT_BAUDRATE:
if line == '' or time.time() > timeout:
if len(self._baudrateDetectList) < 1:
self.close()
self._errorValue = "No more baudrates to test, and no suitable baudrate found."
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
elif self._baudrateDetectRetry > 0:
self._baudrateDetectRetry -= 1
self._serial.write('\n')
self._log("Baudrate test retry: %d" % (self._baudrateDetectRetry))
self._sendCommand("M105")
self._testingBaudrate = True
else:
baudrate = self._baudrateDetectList.pop(0)
try:
self._serial.baudrate = baudrate
self._serial.timeout = settings().getFloat(["serial", "timeout", "detection"])
self._log("Trying baudrate: %d" % (baudrate))
self._baudrateDetectRetry = 5
self._baudrateDetectTestOk = 0
timeout = getNewTimeout("communication")
self._serial.write('\n')
self._sendCommand("M105")
self._testingBaudrate = True
except:
self._log("Unexpected error while setting baudrate: %d %s" % (baudrate, getExceptionString()))
elif 'ok' in line and 'T:' in line:
self._baudrateDetectTestOk += 1
if self._baudrateDetectTestOk < 10:
self._log("Baudrate test ok: %d" % (self._baudrateDetectTestOk))
self._sendCommand("M105")
else:
self._sendCommand("M999")
self._serial.timeout = settings().getFloat(["serial", "timeout", "connection"])
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
eventManager().fire("Connected", "%s at %s baud" % (self._port, self._baudrate))
else:
self._testingBaudrate = False
### Connection attempt
elif self._state == self.STATE_CONNECTING:
if (line == "" or "wait" in line) and startSeen:
self._sendCommand("M105")
elif "start" in line:
startSeen = True
elif "ok" in line and startSeen:
self._changeState(self.STATE_OPERATIONAL)
if not self._sdAvailable:
self.initSdCard()
eventManager().fire("Connected", "%s at %s baud" % (self._port, self._baudrate))
elif time.time() > timeout:
self.close()
### Operational
elif self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PAUSED:
#Request the temperature on comm timeout (every 5 seconds) when we are not printing.
if line == "" or "wait" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty():
self._sendCommand(self._commandQueue.get())
else:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("communication")
# resend -> start resend procedure from requested line
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
### Printing
elif self._state == self.STATE_PRINTING:
if line == "" and time.time() > timeout:
self._log("Communication timeout during printing, forcing a line")
line = 'ok'
if self.isSdPrinting():
if time.time() > tempRequestTimeout and not heatingUp:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("communication")
if time.time() > sdStatusRequestTimeout and not heatingUp:
self._sendCommand("M27")
sdStatusRequestTimeout = time.time() + 1
if 'ok' or 'SD printing byte' in line:
timeout = getNewTimeout("communication")
else:
# Even when printing request the temperature every 5 seconds.
if time.time() > tempRequestTimeout and not self.isStreaming():
self._commandQueue.put("M105")
tempRequestTimeout = getNewTimeout("communication")
if "ok" in line and swallowOk:
swallowOk = False
elif "ok" in line:
timeout = getNewTimeout("communication")
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty() and not self.isStreaming():
self._sendCommand(self._commandQueue.get())
else:
self._sendNext()
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
except:
self._logger.exception("Something crashed inside the serial connection loop, please report this in OctoPrint's bug tracker:")
errorMsg = "See octoprint.log for details"
self._log(errorMsg)
self._errorValue = errorMsg
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
self._log("Connection closed, closing down monitor")
def _openSerial(self):
if self._port == 'AUTO':
self._changeState(self.STATE_DETECT_SERIAL)
programmer = stk500v2.Stk500v2()
self._log("Serial port list: %s" % (str(serialList())))
for p in serialList():
try:
self._log("Connecting to: %s" % (p))
programmer.connect(p)
self._serial = programmer.leaveISP()
break
except ispBase.IspError as (e):
self._log("Error while connecting to %s: %s" % (p, str(e)))
pass
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (p, getExceptionString()))
programmer.close()
if self._serial is None:
self._log("Failed to autodetect serial port")
self._errorValue = 'Failed to autodetect serial port.'
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
return False
elif self._port == 'VIRTUAL':
self._changeState(self.STATE_OPEN_SERIAL)
self._serial = VirtualPrinter()
else:
self._changeState(self.STATE_OPEN_SERIAL)
try:
self._log("Connecting to: %s" % self._port)
if self._baudrate == 0:
self._serial = serial.Serial(str(self._port), 115200, timeout=0.1, writeTimeout=10000)
else:
self._serial = serial.Serial(str(self._port), self._baudrate, timeout=settings().getFloat(["serial", "timeout", "connection"]), writeTimeout=10000)
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (self._port, getExceptionString()))
self._errorValue = "Failed to open serial port, permissions correct?"
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
return False
return True
def _handleErrors(self, line):
# No matter the state, if we see an error, goto the error state and store the error for reference.
if line.startswith('Error:'):
#Oh YEAH, consistency.
# Marlin reports an MIN/MAX temp error as "Error:x\n: Extruder switched off. MAXTEMP triggered !\n"
# But a bed temp error is reported as "Error: Temperature heated bed switched off. MAXTEMP triggered !!"
# So we can have an extra newline in the most common case. Awesome work people.
if self._regex_minMaxError.match(line):
line = line.rstrip() + self._readline()
#Skip the communication errors, as those get corrected.
if 'checksum mismatch' in line \
or 'Wrong checksum' in line \
or 'Line Number is not Last Line Number' in line \
or 'expected line' in line \
or 'No Line Number with checksum' in line \
or 'No Checksum with line number' in line \
or 'Missing checksum' in line:
pass
elif not self.isError():
self._errorValue = line[6:]
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
return line
def _readline(self):
if self._serial == None:
return None
try:
ret = self._serial.readline()
except:
self._log("Unexpected error while reading serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
return None
if ret == '':
#self._log("Recv: TIMEOUT")
return ''
self._log("Recv: %s" % sanitizeAscii(ret))
return ret
def _sendNext(self):
with self._sendNextLock:
line = self._currentFile.getNext()
if line is None:
if self.isStreaming():
self._sendCommand("M29")
filename = self._currentFile.getFilename()
self._currentFile = None
self._callback.mcFileTransferDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire("TransferDone", filename)
self.refreshSdFiles()
else:
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire("PrintDone", self._currentFile.getFilename())
return
self._sendCommand(line, True)
self._callback.mcProgress()
def _handleResendRequest(self, line):
lineToResend = None
try:
lineToResend = int(line.replace("N:"," ").replace("N"," ").replace(":"," ").split()[-1])
except:
if "rs" in line:
lineToResend = int(line.split()[1])
if lineToResend is not None:
self._resendDelta = self._currentLine - lineToResend
if self._resendDelta > len(self._lastLines) or len(self._lastLines) == 0 or self._resendDelta <= 0:
self._errorValue = "Printer requested line %d but no sufficient history is available, can't resend" % lineToResend
self._logger.warn(self._errorValue)
if self.isPrinting():
# abort the print, there's nothing we can do to rescue it now
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
else:
# reset resend delta, we can't do anything about it
self._resendDelta = None
else:
self._resendNextCommand()
def _resendNextCommand(self):
# Make sure we are only handling one sending job at a time
with self._sendingLock:
self._logger.debug("Resending line %d, delta is %d, history log is %s items strong" % (self._currentLine - self._resendDelta, self._resendDelta, len(self._lastLines)))
cmd = self._lastLines[-self._resendDelta]
lineNumber = self._currentLine - self._resendDelta
self._doSendWithChecksum(cmd, lineNumber)
self._resendDelta -= 1
if self._resendDelta <= 0:
self._resendDelta = None
def _sendCommand(self, cmd, sendChecksum=False):
# Make sure we are only handling one sending job at a time
with self._sendingLock:
if self._serial is None:
return
if not self.isStreaming():
gcode = self._regex_command.search(cmd)
if gcode:
gcode = gcode.group(1)
if gcode in gcodeToEvent:
eventManager().fire(gcodeToEvent[gcode])
gcodeHandler = "_gcode_" + gcode
if hasattr(self, gcodeHandler):
cmd = getattr(self, gcodeHandler)(cmd)
if cmd is not None:
self._doSend(cmd, sendChecksum)
def _doSend(self, cmd, sendChecksum=False):
if sendChecksum or self._alwaysSendChecksum:
lineNumber = self._currentLine
self._addToLastLines(cmd)
self._currentLine += 1
self._doSendWithChecksum(cmd, lineNumber)
else:
self._doSendWithoutChecksum(cmd)
def _doSendWithChecksum(self, cmd, lineNumber):
self._logger.debug("Sending cmd '%s' with lineNumber %r" % (cmd, lineNumber))
commandToSend = "N%d %s" % (lineNumber, cmd)
checksum = reduce(lambda x,y:x^y, map(ord, commandToSend))
commandToSend = "%s*%d" % (commandToSend, checksum)
self._doSendWithoutChecksum(commandToSend)
def _doSendWithoutChecksum(self, cmd):
self._log("Send: %s" % cmd)
try:
self._serial.write(cmd + '\n')
except serial.SerialTimeoutException:
self._log("Serial timeout while writing to serial port, trying again.")
try:
self._serial.write(cmd + '\n')
except:
self._log("Unexpected error while writing serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
except:
self._log("Unexpected error while writing serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
def _gcode_G0(self, cmd):
if 'Z' in cmd:
match = self._regex_paramZFloat.search(cmd)
if match:
try:
z = float(match.group(1))
if self._currentZ != z:
self._currentZ = z
self._callback.mcZChange(z)
except ValueError:
pass
return cmd
_gcode_G1 = _gcode_G0
def _gcode_M0(self, cmd):
self.setPause(True)
return "M105" # Don't send the M0 or M1 to the machine, as M0 and M1 are handled as an LCD menu pause.
_gcode_M1 = _gcode_M0
def _gcode_M104(self, cmd):
match = self._regex_paramSInt.search(cmd)
if match:
try:
self._targetTemp = float(match.group(1))
except ValueError:
pass
return cmd
def _gcode_M140(self, cmd):
match = self._regex_paramSInt.search(cmd)
if match:
try:
self._bedTargetTemp = float(match.group(1))
except ValueError:
pass
return cmd
def _gcode_M109(self, cmd):
self._heatupWaitStartTime = time.time()
return self._gcode_M104(cmd)
def _gcode_M190(self, cmd):
self._heatupWaitStartTime = time.time()
return self._gcode_M140(cmd)
def _gcode_M110(self, cmd):
newLineNumber = None
match = self._regex_paramNInt.search(cmd)
if match:
try:
newLineNumber = int(match.group(1))
except:
pass
else:
newLineNumber = 0
# send M110 command with new line number
self._doSendWithChecksum(cmd, newLineNumber)
self._currentLine = newLineNumber + 1
# after a reset of the line number we have no way to determine what line exactly the printer now wants
self._lastLines.clear()
self._resendDelta = None
return None
def _monitor(self):
feedbackControls = settings().getFeedbackControls()
pauseTriggers = settings().getPauseTriggers()
feedbackErrors = []
#Open the serial port.
if self._port == 'AUTO':
self._changeState(self.STATE_DETECT_SERIAL)
programmer = stk500v2.Stk500v2()
self._log("Serial port list: %s" % (str(serialList())))
for p in serialList():
try:
self._log("Connecting to: %s" % (p))
programmer.connect(p)
self._serial = programmer.leaveISP()
break
except ispBase.IspError as (e):
self._log("Error while connecting to %s: %s" % (p, str(e)))
pass
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (p, getExceptionString()))
programmer.close()
elif self._port == 'VIRTUAL':
self._changeState(self.STATE_OPEN_SERIAL)
self._serial = VirtualPrinter()
else:
self._changeState(self.STATE_OPEN_SERIAL)
try:
self._log("Connecting to: %s" % (self._port))
if self._baudrate == 0:
self._serial = serial.Serial(str(self._port), 115200, timeout=0.1, writeTimeout=10000)
else:
self._serial = serial.Serial(str(self._port), self._baudrate, timeout=settings().getFloat(["serial", "timeout", "connection"]), writeTimeout=10000)
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (self._port, getExceptionString()))
if self._serial == None:
self._log("Failed to open serial port (%s)" % (self._port))
self._errorValue = 'Failed to autodetect serial port.'
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
return
self._log("Connected to: %s, starting monitor" % (self._serial))
if self._baudrate == 0:
self._changeState(self.STATE_DETECT_BAUDRATE)
else:
self._changeState(self.STATE_CONNECTING)
#Start monitoring the serial port.
timeout = getNewTimeout("communication")
tempRequestTimeout = timeout
sdStatusRequestTimeout = timeout
startSeen = not settings().getBoolean(["feature", "waitForStartOnConnect"])
heatingUp = False
swallowOk = False
while True:
try:
line = self._readline()
if line == None:
break
##~~ Error handling
# No matter the state, if we see an error, goto the error state and store the error for reference.
if line.startswith('Error:'):
#Oh YEAH, consistency.
# Marlin reports an MIN/MAX temp error as "Error:x\n: Extruder switched off. MAXTEMP triggered !\n"
# But a bed temp error is reported as "Error: Temperature heated bed switched off. MAXTEMP triggered !!"
# So we can have an extra newline in the most common case. Awesome work people.
if re.match('Error:[0-9]\n', line):
line = line.rstrip() + self._readline()
#Skip the communication errors, as those get corrected.
if 'checksum mismatch' in line \
or 'Wrong checksum' in line \
or 'Line Number is not Last Line Number' in line \
or 'expected line' in line \
or 'No Line Number with checksum' in line \
or 'No Checksum with line number' in line \
or 'Missing checksum' in line:
pass
elif not self.isError():
self._errorValue = line[6:]
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
##~~ SD file list
# if we are currently receiving an sd file list, each line is just a filename, so just read it and abort processing
if self._sdFileList and not 'End file list' in line:
self._sdFiles.append(line.strip().lower())
continue
##~~ Temperature processing
if ' T:' in line or line.startswith('T:'):
try:
self._temp = float(re.search("-?[0-9\.]*", line.split('T:')[1]).group(0))
if ' B:' in line:
self._bedTemp = float(re.search("-?[0-9\.]*", line.split(' B:')[1]).group(0))
self._callback.mcTempUpdate(self._temp, self._bedTemp, self._targetTemp, self._bedTargetTemp)
except ValueError:
# catch conversion issues, we'll rather just not get the temperature update instead of killing the connection
pass
#If we are waiting for an M109 or M190 then measure the time we lost during heatup, so we can remove that time from our printing time estimate.
if not 'ok' in line:
heatingUp = True
if self._heatupWaitStartTime != 0:
t = time.time()
self._heatupWaitTimeLost = t - self._heatupWaitStartTime
self._heatupWaitStartTime = t
##~~ SD Card handling
elif 'SD init fail' in line:
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Not SD printing' in line:
if self.isSdFileSelected() and self.isPrinting():
# something went wrong, printer is reporting that we actually are not printing right now...
self._sdFilePos = 0
self._changeState(self.STATE_OPERATIONAL)
elif 'SD card ok' in line:
self._sdAvailable = True
self.refreshSdFiles()
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Begin file list' in line:
self._sdFiles = []
self._sdFileList = True
elif 'End file list' in line:
self._sdFileList = False
self._callback.mcSdFiles(self._sdFiles)
elif 'SD printing byte' in line:
# answer to M27, at least on Marlin, Repetier and Sprinter: "SD printing byte %d/%d"
match = re.search("([0-9]*)/([0-9]*)", line)
self._currentFile.setFilepos(int(match.group(1)))
self._callback.mcProgress()
elif 'File opened' in line:
# answer to M23, at least on Marlin, Repetier and Sprinter: "File opened:%s Size:%d"
match = re.search("File opened:\s*(.*?)\s+Size:\s*([0-9]*)", line)
self._currentFile = PrintingSdFileInformation(match.group(1), int(match.group(2)))
elif 'File selected' in line:
# final answer to M23, at least on Marlin, Repetier and Sprinter: "File selected"
self._callback.mcFileSelected(self._currentFile.getFilename(), self._currentFile.getFilesize(), True)
eventManager().fire("FileSelected", self._currentFile.getFilename())
elif 'Writing to file' in line:
# anwer to M28, at least on Marlin, Repetier and Sprinter: "Writing to file: %s"
self._printSection = "CUSTOM"
self._changeState(self.STATE_PRINTING)
elif 'Done printing file' in line:
# printer is reporting file finished printing
self._sdFilePos = 0
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire("PrintDone")
##~~ Message handling
elif line.strip() != '' and line.strip() != 'ok' and not line.startswith("wait") and not line.startswith('Resend:') and line != 'echo:Unknown command:""\n' and self.isOperational():
self._callback.mcMessage(line)
##~~ Parsing for feedback commands
if feedbackControls:
for name, matcher, template in feedbackControls:
try:
match = matcher.search(line)
if match is not None:
format = None
if isinstance(template, str):
format = str.format
elif isinstance(template, unicode):
format = unicode.format
if format is not None:
self._callback.mcReceivedRegisteredMessage(name, format(template, *(match.groups("n/a"))))
except:
if not name in feedbackErrors:
self._logger.info("Something went wrong with feedbackControl \"%s\": " % name, exc_info=True)
feedbackErrors.append(name)
pass
##~~ Parsing for pause triggers
if pauseTriggers:
if "enable" in pauseTriggers.keys() and pauseTriggers["enable"].search(line) is not None:
self.setPause(True)
elif "disable" in pauseTriggers.keys() and pauseTriggers["disable"].search(line) is not None:
self.setPause(False)
elif "toggle" in pauseTriggers.keys() and pauseTriggers["toggle"].search(line) is not None:
self.setPause(not self.isPaused())
if "ok" in line and heatingUp:
heatingUp = False
### Baudrate detection
if self._state == self.STATE_DETECT_BAUDRATE:
if line == '' or time.time() > timeout:
if len(self._baudrateDetectList) < 1:
self.close()
self._errorValue = "No more baudrates to test, and no suitable baudrate found."
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
elif self._baudrateDetectRetry > 0:
self._baudrateDetectRetry -= 1
self._serial.write('\n')
self._log("Baudrate test retry: %d" % (self._baudrateDetectRetry))
self._sendCommand("M105")
self._testingBaudrate = True
else:
baudrate = self._baudrateDetectList.pop(0)
try:
self._serial.baudrate = baudrate
self._serial.timeout = settings().getFloat(["serial", "timeout", "detection"])
self._log("Trying baudrate: %d" % (baudrate))
self._baudrateDetectRetry = 5
self._baudrateDetectTestOk = 0
timeout = getNewTimeout("communication")
self._serial.write('\n')
self._sendCommand("M105")
self._testingBaudrate = True
except:
self._log("Unexpected error while setting baudrate: %d %s" % (baudrate, getExceptionString()))
elif 'ok' in line and 'T:' in line:
self._baudrateDetectTestOk += 1
if self._baudrateDetectTestOk < 10:
self._log("Baudrate test ok: %d" % (self._baudrateDetectTestOk))
self._sendCommand("M105")
else:
self._sendCommand("M999")
self._serial.timeout = settings().getFloat(["serial", "timeout", "connection"])
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
eventManager().fire("Connected", "%s at %s baud" % (self._port, self._baudrate))
else:
self._testingBaudrate = False
### Connection attempt
elif self._state == self.STATE_CONNECTING:
if (line == "" or "wait" in line) and startSeen:
self._sendCommand("M105")
elif "start" in line:
startSeen = True
elif "ok" in line and startSeen:
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
eventManager().fire("Connected", "%s at %s baud" % (self._port, self._baudrate))
elif time.time() > timeout:
self.close()
### Operational
elif self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PAUSED:
#Request the temperature on comm timeout (every 5 seconds) when we are not printing.
if line == "" or "wait" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty():
self._sendCommand(self._commandQueue.get())
else:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("communication")
# resend -> start resend procedure from requested line
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
### Printing
elif self._state == self.STATE_PRINTING:
if line == "" and time.time() > timeout:
self._log("Communication timeout during printing, forcing a line")
line = 'ok'
if self.isSdPrinting():
if time.time() > tempRequestTimeout and not heatingUp:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("communication")
if time.time() > sdStatusRequestTimeout and not heatingUp:
self._sendCommand("M27")
sdStatusRequestTimeout = time.time() + 1
if 'ok' or 'SD printing byte' in line:
timeout = getNewTimeout("communication")
else:
# Even when printing request the temperature every 5 seconds.
if time.time() > tempRequestTimeout and not self.isStreaming():
self._commandQueue.put("M105")
tempRequestTimeout = getNewTimeout("communication")
if "ok" in line and swallowOk:
swallowOk = False
elif "ok" in line:
timeout = getNewTimeout("communication")
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty() and not self.isStreaming():
self._sendCommand(self._commandQueue.get())
else:
self._sendNext()
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
except:
self._logger.exception("Something crashed inside the serial connection loop, please report this in OctoPrint's bug tracker:")
errorMsg = "See octoprint.log for details"
self._log(errorMsg)
self._errorValue = errorMsg
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
self._log("Connection closed, closing down monitor")
def _monitor(self):
feedbackControls = settings().getFeedbackControls()
pauseTriggers = settings().getPauseTriggers()
feedbackErrors = []
#Open the serial port.
if self._port == 'AUTO':
self._changeState(self.STATE_DETECT_SERIAL)
programmer = stk500v2.Stk500v2()
self._log("Serial port list: %s" % (str(serialList())))
for p in serialList():
try:
self._log("Connecting to: %s" % (p))
programmer.connect(p)
self._serial = programmer.leaveISP()
break
except ispBase.IspError as (e):
self._log("Error while connecting to %s: %s" % (p, str(e)))
pass
except:
self._log(
"Unexpected error while connecting to serial port: %s %s"
% (p, getExceptionString()))
programmer.close()
elif self._port == 'VIRTUAL':
self._changeState(self.STATE_OPEN_SERIAL)
self._serial = VirtualPrinter()
else:
self._changeState(self.STATE_OPEN_SERIAL)
try:
self._log("Connecting to: %s" % (self._port))
if self._baudrate == 0:
self._serial = serial.Serial(str(self._port),
115200,
timeout=0.1,
writeTimeout=10000)
else:
self._serial = serial.Serial(str(self._port),
self._baudrate,
timeout=settings().getFloat([
"serial", "timeout",
"connection"
]),
writeTimeout=10000)
except:
self._log(
"Unexpected error while connecting to serial port: %s %s" %
(self._port, getExceptionString()))
if self._serial == None:
self._log("Failed to open serial port (%s)" % (self._port))
self._errorValue = 'Failed to autodetect serial port.'
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
return
self._log("Connected to: %s, starting monitor" % (self._serial))
if self._baudrate == 0:
self._changeState(self.STATE_DETECT_BAUDRATE)
else:
self._changeState(self.STATE_CONNECTING)
#Start monitoring the serial port.
timeout = getNewTimeout("communication")
tempRequestTimeout = timeout
sdStatusRequestTimeout = timeout
startSeen = not settings().getBoolean(
["feature", "waitForStartOnConnect"])
heatingUp = False
swallowOk = False
while True:
try:
line = self._readline()
if line == None:
break
##~~ Error handling
# No matter the state, if we see an error, goto the error state and store the error for reference.
if line.startswith('Error:'):
#Oh YEAH, consistency.
# Marlin reports an MIN/MAX temp error as "Error:x\n: Extruder switched off. MAXTEMP triggered !\n"
# But a bed temp error is reported as "Error: Temperature heated bed switched off. MAXTEMP triggered !!"
# So we can have an extra newline in the most common case. Awesome work people.
if self._regex_minMaxError.match(line):
line = line.rstrip() + self._readline()
#Skip the communication errors, as those get corrected.
if 'checksum mismatch' in line \
or 'Wrong checksum' in line \
or 'Line Number is not Last Line Number' in line \
or 'expected line' in line \
or 'No Line Number with checksum' in line \
or 'No Checksum with line number' in line \
or 'Missing checksum' in line:
pass
elif not self.isError():
self._errorValue = line[6:]
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
##~~ SD file list
# if we are currently receiving an sd file list, each line is just a filename, so just read it and abort processing
if self._sdFileList and not 'End file list' in line:
self._sdFiles.append(line.strip().lower())
continue
##~~ Temperature processing
if ' T:' in line or line.startswith('T:'):
try:
self._temp = float(
self._regex_float.search(
line.split('T:')[1]).group(0))
if ' B:' in line:
self._bedTemp = float(
self._regex_float.search(
line.split(' B:')[1]).group(0))
self._callback.mcTempUpdate(self._temp, self._bedTemp,
self._targetTemp,
self._bedTargetTemp)
except ValueError:
# catch conversion issues, we'll rather just not get the temperature update instead of killing the connection
pass
#If we are waiting for an M109 or M190 then measure the time we lost during heatup, so we can remove that time from our printing time estimate.
if not 'ok' in line:
heatingUp = True
if self._heatupWaitStartTime != 0:
t = time.time()
self._heatupWaitTimeLost = t - self._heatupWaitStartTime
self._heatupWaitStartTime = t
##~~ SD Card handling
elif 'SD init fail' in line:
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Not SD printing' in line:
if self.isSdFileSelected() and self.isPrinting():
# something went wrong, printer is reporting that we actually are not printing right now...
self._sdFilePos = 0
self._changeState(self.STATE_OPERATIONAL)
elif 'SD card ok' in line:
self._sdAvailable = True
self.refreshSdFiles()
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Begin file list' in line:
self._sdFiles = []
self._sdFileList = True
elif 'End file list' in line:
self._sdFileList = False
self._callback.mcSdFiles(self._sdFiles)
elif 'SD printing byte' in line:
# answer to M27, at least on Marlin, Repetier and Sprinter: "SD printing byte %d/%d"
match = self._regex_sdPrintingByte.search(
"([0-9]*)/([0-9]*)", line)
self._currentFile.setFilepos(int(match.group(1)))
self._callback.mcProgress()
elif 'File opened' in line:
# answer to M23, at least on Marlin, Repetier and Sprinter: "File opened:%s Size:%d"
match = self._regex_sdFileOpened.search(line)
self._currentFile = PrintingSdFileInformation(
match.group(1), int(match.group(2)))
elif 'File selected' in line:
# final answer to M23, at least on Marlin, Repetier and Sprinter: "File selected"
self._callback.mcFileSelected(
self._currentFile.getFilename(),
self._currentFile.getFilesize(), True)
eventManager().fire("FileSelected",
self._currentFile.getFilename())
elif 'Writing to file' in line:
# anwer to M28, at least on Marlin, Repetier and Sprinter: "Writing to file: %s"
self._changeState(self.STATE_PRINTING)
line = "ok"
elif 'Done printing file' in line:
# printer is reporting file finished printing
self._sdFilePos = 0
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire("PrintDone")
##~~ Message handling
elif line.strip() != '' and line.strip(
) != 'ok' and not line.startswith(
"wait"
) and not line.startswith(
'Resend:'
) and line != 'echo:Unknown command:""\n' and self.isOperational(
):
self._callback.mcMessage(line)
##~~ Parsing for feedback commands
if feedbackControls:
for name, matcher, template in feedbackControls:
try:
match = matcher.search(line)
if match is not None:
format = None
if isinstance(template, str):
format = str.format
elif isinstance(template, unicode):
format = unicode.format
if format is not None:
self._callback.mcReceivedRegisteredMessage(
name,
format(template,
*(match.groups("n/a"))))
except:
if not name in feedbackErrors:
self._logger.info(
"Something went wrong with feedbackControl \"%s\": "
% name,
exc_info=True)
feedbackErrors.append(name)
pass
##~~ Parsing for pause triggers
if pauseTriggers and not self.isStreaming():
if "enable" in pauseTriggers.keys(
) and pauseTriggers["enable"].search(line) is not None:
self.setPause(True)
elif "disable" in pauseTriggers.keys(
) and pauseTriggers["disable"].search(line) is not None:
self.setPause(False)
elif "toggle" in pauseTriggers.keys(
) and pauseTriggers["toggle"].search(line) is not None:
self.setPause(not self.isPaused())
if "ok" in line and heatingUp:
heatingUp = False
### Baudrate detection
if self._state == self.STATE_DETECT_BAUDRATE:
if line == '' or time.time() > timeout:
if len(self._baudrateDetectList) < 1:
self.close()
self._errorValue = "No more baudrates to test, and no suitable baudrate found."
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
elif self._baudrateDetectRetry > 0:
self._baudrateDetectRetry -= 1
self._serial.write('\n')
self._log("Baudrate test retry: %d" %
(self._baudrateDetectRetry))
self._sendCommand("M105")
self._testingBaudrate = True
else:
baudrate = self._baudrateDetectList.pop(0)
try:
self._serial.baudrate = baudrate
self._serial.timeout = settings().getFloat(
["serial", "timeout", "detection"])
self._log("Trying baudrate: %d" % (baudrate))
self._baudrateDetectRetry = 5
self._baudrateDetectTestOk = 0
timeout = getNewTimeout("communication")
self._serial.write('\n')
self._sendCommand("M105")
self._testingBaudrate = True
except:
self._log(
"Unexpected error while setting baudrate: %d %s"
% (baudrate, getExceptionString()))
elif 'ok' in line and 'T:' in line:
self._baudrateDetectTestOk += 1
if self._baudrateDetectTestOk < 10:
self._log("Baudrate test ok: %d" %
(self._baudrateDetectTestOk))
self._sendCommand("M105")
else:
self._sendCommand("M999")
self._serial.timeout = settings().getFloat(
["serial", "timeout", "connection"])
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
eventManager().fire(
"Connected",
"%s at %s baud" % (self._port, self._baudrate))
else:
self._testingBaudrate = False
### Connection attempt
elif self._state == self.STATE_CONNECTING:
if (line == "" or "wait" in line) and startSeen:
self._sendCommand("M105")
elif "start" in line:
startSeen = True
elif "ok" in line and startSeen:
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
eventManager().fire(
"Connected",
"%s at %s baud" % (self._port, self._baudrate))
elif time.time() > timeout:
self.close()
### Operational
elif self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PAUSED:
#Request the temperature on comm timeout (every 5 seconds) when we are not printing.
if line == "" or "wait" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty():
self._sendCommand(self._commandQueue.get())
else:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("communication")
# resend -> start resend procedure from requested line
elif line.lower().startswith(
"resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
### Printing
elif self._state == self.STATE_PRINTING:
if line == "" and time.time() > timeout:
self._log(
"Communication timeout during printing, forcing a line"
)
line = 'ok'
if self.isSdPrinting():
if time.time() > tempRequestTimeout and not heatingUp:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("communication")
if time.time(
) > sdStatusRequestTimeout and not heatingUp:
self._sendCommand("M27")
sdStatusRequestTimeout = time.time() + 1
if 'ok' or 'SD printing byte' in line:
timeout = getNewTimeout("communication")
else:
# Even when printing request the temperature every 5 seconds.
if time.time(
) > tempRequestTimeout and not self.isStreaming():
self._commandQueue.put("M105")
tempRequestTimeout = getNewTimeout("communication")
if "ok" in line and swallowOk:
swallowOk = False
elif "ok" in line:
timeout = getNewTimeout("communication")
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty(
) and not self.isStreaming():
self._sendCommand(self._commandQueue.get())
else:
self._sendNext()
elif line.lower().startswith(
"resend") or line.lower().startswith("rs"):
if settings().get(
["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
except:
self._logger.exception(
"Something crashed inside the serial connection loop, please report this in OctoPrint's bug tracker:"
)
errorMsg = "See octoprint.log for details"
self._log(errorMsg)
self._errorValue = errorMsg
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
self._log("Connection closed, closing down monitor")
class SerialTransport(Transport):
__transportinfo__ = ("serial", "Serial", False)
def __init__(self, messageReceiver, stateReceiver, logReceiver):
Transport.__init__(self, messageReceiver, stateReceiver, logReceiver)
self._serial = None
self._port = None
self._baudrate = None
self._connectionTimeout = None
self._writeTimeout = None
self._readTimeout = None
self._timeoutCounter = 0
self._maxTimeouts = 20
self._thread = None
def get_properties(self):
return {TransportProperties.FLOWCONTROL: False}
def get_connection_options(self):
return {
"port": self.__getSerialList(),
"baudrate": self.__getBaudrateList()
}
def connect(self, opt):
Transport.connect(self, opt)
self._port = opt["port"] if "port" in opt else None
self._baudrate = opt["baudrate"] if "baudrate" in opt else None
self._readTimeout = opt["timeout"][
"read"] if "timeout" in opt and "read" in opt["timeout"] else 5.0
self._writeTimeout = opt["timeout"][
"write"] if "timeout" in opt and "write" in opt["timeout"] else 0.5
if self._connect():
self._thread = threading.Thread(target=self._monitor,
name="SerialTransportMonitor")
self._thread.daemon = True
self._thread.start()
def disconnect(self, onError=False):
try:
if self._serial is not None:
self._serial.close()
finally:
self._serial = None
self._thread = None
Transport.disconnect(self, onError)
def send(self, command):
commandToSend = command + "\n"
try:
self._serial.write(commandToSend)
self._transport_logger.info("Send: %s" % command)
self.logTx(command)
except serial.SerialTimeoutException:
self._transport_logger.warn("Timeout while sending: %s" % command)
self.logError(
"Serial timeout while writing to serial port, try again later."
)
raise SendTimeout()
except:
exceptionString = getExceptionString()
self.logError("Unexpected error while writing serial port: %s" %
exceptionString)
self.onError(exceptionString)
self.disconnect(True)
raise TransportError()
def receive(self):
return self._readline()
def _monitor(self):
error = None
while True:
line = self._readline()
if line is None:
error = "Serial connection closed unexpectedly"
break
if line == "":
self._timeoutCounter += 1
self.onTimeout()
if self._maxTimeouts and self._timeoutCounter > self._maxTimeouts:
error = "Printer did not respond at all over %d retries, considering it dead" % self._maxTimeouts
break
else:
self._timeoutCounter = 0
self.onMessageReceived(line.strip())
if error is not None:
self._transport_logger.error(error)
self.logError(error)
self.onError(error)
# TODO further error handling
def _connect(self):
self.changeState(State.OPENING_CONNECTION)
if self._port == "VIRTUAL":
self._serial = VirtualPrinter(read_timeout=self._readTimeout,
write_timeout=self._writeTimeout)
self.changeState(State.CONNECTED)
self._transport_logger.debug("Connected to %s" % self._serial)
else:
try:
self._serial = serial.Serial(self._port,
self._baudrate,
timeout=self._readTimeout,
writeTimeout=self._writeTimeout)
self.changeState(State.CONNECTED)
self._transport_logger.debug("Connected to %s" % self._serial)
except:
self.logError(
"Unexpected error while connecting to serial port: %s %s" %
(self._port, getExceptionString()))
self.onError(
"Failed to open serial port, permissions correct?")
return False
eventManager().fire(Events.CONNECTED, {
"port": self._port,
"baudrate": self._baudrate
})
return True
def _readline(self):
if self._serial is None:
return None
try:
line = self._serial.readline()
except:
exceptionString = getExceptionString()
self.logError("Unexpected error while reading serial port: %s" %
exceptionString)
self.onError(exceptionString)
self.disconnect()
return None
if line != "":
loggable_line = unicode(line, "ascii",
"replace").encode("ascii",
"replace").rstrip()
self._transport_logger.debug("Recv: %s" % loggable_line)
self.logRx(loggable_line)
return line
def __getSerialList(self):
baselist = []
if os.name == "nt":
try:
key = _winreg.OpenKey(_winreg.HKEY_LOCAL_MACHINE,
"HARDWARE\\DEVICEMAP\\SERIALCOMM")
i = 0
while (1):
baselist += [_winreg.EnumValue(key, i)[1]]
i += 1
except:
pass
baselist = baselist \
+ glob.glob("/dev/ttyUSB*") \
+ glob.glob("/dev/ttyACM*") \
+ glob.glob("/dev/ttyAMA*") \
+ glob.glob("/dev/tty.usb*") \
+ glob.glob("/dev/cu.*") \
+ glob.glob("/dev/rfcomm*")
additionalPorts = settings().get(["serial", "additionalPorts"])
for additional in additionalPorts:
baselist += glob.glob(additional)
prev = settings().get(["serial", "port"])
if prev in baselist:
baselist.remove(prev)
baselist.insert(0, prev)
if settings().getBoolean(["devel", "virtualPrinter", "enabled"]):
baselist.append("VIRTUAL")
return baselist
def __getBaudrateList(self):
ret = [250000, 230400, 115200, 57600, 38400, 19200, 9600]
prev = settings().getInt(["serial", "baudrate"])
if prev in ret:
ret.remove(prev)
ret.insert(0, prev)
return ret
class SerialTransport(Transport):
__transportinfo__ = ("serial", "Serial", False)
def __init__(self, messageReceiver, stateReceiver, logReceiver):
Transport.__init__(self, messageReceiver, stateReceiver, logReceiver)
self._serial = None
self._port = None
self._baudrate = None
self._connectionTimeout = None
self._writeTimeout = None
self._readTimeout = None
self._timeoutCounter = 0
self._maxTimeouts = 20
self._thread = None
def get_properties(self):
return {
TransportProperties.FLOWCONTROL: False
}
def get_connection_options(self):
return {
"port": self.__getSerialList(),
"baudrate": self.__getBaudrateList()
}
def connect(self, opt):
Transport.connect(self, opt)
self._port = opt["port"] if "port" in opt else None
self._baudrate = opt["baudrate"] if "baudrate" in opt else None
self._readTimeout = opt["timeout"]["read"] if "timeout" in opt and "read" in opt["timeout"] else 5.0
self._writeTimeout = opt["timeout"]["write"] if "timeout" in opt and "write" in opt["timeout"] else 0.5
if self._connect():
self._thread = threading.Thread(target=self._monitor, name="SerialTransportMonitor")
self._thread.daemon = True
self._thread.start()
def disconnect(self, onError=False):
try:
if self._serial is not None:
self._serial.close()
finally:
self._serial = None
self._thread = None
Transport.disconnect(self, onError)
def send(self, command):
commandToSend = command + "\n"
try:
self._serial.write(commandToSend)
self._transport_logger.info("Send: %s" % command)
self.logTx(command)
except serial.SerialTimeoutException:
self._transport_logger.warn("Timeout while sending: %s" % command)
self.logError("Serial timeout while writing to serial port, try again later.")
raise SendTimeout()
except:
exceptionString = getExceptionString()
self.logError("Unexpected error while writing serial port: %s" % exceptionString)
self.onError(exceptionString)
self.disconnect(True)
raise TransportError()
def receive(self):
return self._readline()
def _monitor(self):
error = None
while True:
line = self._readline()
if line is None:
error = "Serial connection closed unexpectedly"
break
if line == "":
self._timeoutCounter += 1
self.onTimeout()
if self._maxTimeouts and self._timeoutCounter > self._maxTimeouts:
error = "Printer did not respond at all over %d retries, considering it dead" % self._maxTimeouts
break
else:
self._timeoutCounter = 0
self.onMessageReceived(line.strip())
if error is not None:
self._transport_logger.error(error)
self.logError(error)
self.onError(error)
# TODO further error handling
def _connect(self):
self.changeState(State.OPENING_CONNECTION)
if self._port == "VIRTUAL":
self._serial = VirtualPrinter(read_timeout=self._readTimeout, write_timeout=self._writeTimeout)
self.changeState(State.CONNECTED)
self._transport_logger.debug("Connected to %s" % self._serial)
else:
try:
self._serial = serial.Serial(self._port, self._baudrate, timeout=self._readTimeout, writeTimeout=self._writeTimeout)
self.changeState(State.CONNECTED)
self._transport_logger.debug("Connected to %s" % self._serial)
except:
self.logError("Unexpected error while connecting to serial port: %s %s" % (self._port, getExceptionString()))
self.onError("Failed to open serial port, permissions correct?")
return False
eventManager().fire(Events.CONNECTED, {"port": self._port, "baudrate": self._baudrate})
return True
def _readline(self):
if self._serial is None:
return None
try:
line = self._serial.readline()
except:
exceptionString = getExceptionString()
self.logError("Unexpected error while reading serial port: %s" % exceptionString)
self.onError(exceptionString)
self.disconnect()
return None
if line != "":
loggable_line = unicode(line, "ascii", "replace").encode("ascii", "replace").rstrip()
self._transport_logger.debug("Recv: %s" % loggable_line)
self.logRx(loggable_line)
return line
def __getSerialList(self):
baselist=[]
if os.name == "nt":
try:
key=_winreg.OpenKey(_winreg.HKEY_LOCAL_MACHINE,"HARDWARE\\DEVICEMAP\\SERIALCOMM")
i=0
while(1):
baselist+=[_winreg.EnumValue(key,i)[1]]
i+=1
except:
pass
baselist = baselist \
+ glob.glob("/dev/ttyUSB*") \
+ glob.glob("/dev/ttyACM*") \
+ glob.glob("/dev/ttyAMA*") \
+ glob.glob("/dev/tty.usb*") \
+ glob.glob("/dev/cu.*") \
+ glob.glob("/dev/rfcomm*")
additionalPorts = settings().get(["serial", "additionalPorts"])
for additional in additionalPorts:
baselist += glob.glob(additional)
prev = settings().get(["serial", "port"])
if prev in baselist:
baselist.remove(prev)
baselist.insert(0, prev)
if settings().getBoolean(["devel", "virtualPrinter", "enabled"]):
baselist.append("VIRTUAL")
return baselist
def __getBaudrateList(self):
ret = [250000, 230400, 115200, 57600, 38400, 19200, 9600]
prev = settings().getInt(["serial", "baudrate"])
if prev in ret:
ret.remove(prev)
ret.insert(0, prev)
return ret
class MachineCom(object):
STATE_NONE = 0
STATE_OPEN_SERIAL = 1
STATE_DETECT_SERIAL = 2
STATE_DETECT_BAUDRATE = 3
STATE_CONNECTING = 4
STATE_OPERATIONAL = 5
STATE_PRINTING = 6
STATE_PAUSED = 7
STATE_CLOSED = 8
STATE_ERROR = 9
STATE_CLOSED_WITH_ERROR = 10
STATE_TRANSFERING_FILE = 11
def __init__(self, port = None, baudrate = None, callbackObject = None):
self._logger = logging.getLogger(__name__)
self._serialLogger = logging.getLogger("SERIAL")
if port == None:
port = settings().get(["serial", "port"])
if baudrate == None:
settingsBaudrate = settings().getInt(["serial", "baudrate"])
if settingsBaudrate is None:
baudrate = 0
else:
baudrate = settingsBaudrate
if callbackObject == None:
callbackObject = MachineComPrintCallback()
self._port = port
self._baudrate = baudrate
self._callback = callbackObject
self._state = self.STATE_NONE
self._serial = None
self._baudrateDetectList = baudrateList()
self._baudrateDetectRetry = 0
self._temp = 0
self._bedTemp = 0
self._targetTemp = 0
self._bedTargetTemp = 0
self._commandQueue = queue.Queue()
self._currentZ = None
self._heatupWaitStartTime = 0
self._heatupWaitTimeLost = 0.0
self._alwaysSendChecksum = settings().getBoolean(["feature", "alwaysSendChecksum"])
self._currentLine = 0
self._resendDelta = None
self._lastLines = deque([], 50)
# multithreading locks
self._sendNextLock = threading.Lock()
self._sendingLock = threading.Lock()
# monitoring thread
self.thread = threading.Thread(target=self._monitor)
self.thread.daemon = True
self.thread.start()
# SD status data
self._sdAvailable = False
self._sdFileList = False
self._sdFiles = []
# print job
self._currentFile = None
def __del__(self):
self.close()
##~~ internal state management
def _changeState(self, newState):
if self._state == newState:
return
if newState == self.STATE_CLOSED or newState == self.STATE_CLOSED_WITH_ERROR:
if settings().get(["feature", "sdSupport"]):
self._sdFileList = False
self._sdFiles = []
self._callback.mcSdFiles([])
oldState = self.getStateString()
self._state = newState
self._log('Changing monitoring state from \'%s\' to \'%s\'' % (oldState, self.getStateString()))
self._callback.mcStateChange(newState)
def _log(self, message):
self._callback.mcLog(message)
self._serialLogger.debug(message)
def _addToLastLines(self, cmd):
self._lastLines.append(cmd)
self._logger.debug("Got %d lines of history in memory" % len(self._lastLines))
##~~ getters
def getState(self):
return self._state
def getStateString(self):
if self._state == self.STATE_NONE:
return "Offline"
if self._state == self.STATE_OPEN_SERIAL:
return "Opening serial port"
if self._state == self.STATE_DETECT_SERIAL:
return "Detecting serial port"
if self._state == self.STATE_DETECT_BAUDRATE:
return "Detecting baudrate"
if self._state == self.STATE_CONNECTING:
return "Connecting"
if self._state == self.STATE_OPERATIONAL:
return "Operational"
if self._state == self.STATE_PRINTING:
if self.isSdFileSelected():
return "Printing from SD"
elif self.isStreaming():
return "Sending file to SD"
else:
return "Printing"
if self._state == self.STATE_PAUSED:
return "Paused"
if self._state == self.STATE_CLOSED:
return "Closed"
if self._state == self.STATE_ERROR:
return "Error: %s" % (self.getShortErrorString())
if self._state == self.STATE_CLOSED_WITH_ERROR:
return "Error: %s" % (self.getShortErrorString())
if self._state == self.STATE_TRANSFERING_FILE:
return "Transfering file to SD"
return "?%d?" % (self._state)
def getShortErrorString(self):
if len(self._errorValue) < 20:
return self._errorValue
return self._errorValue[:20] + "..."
def getErrorString(self):
return self._errorValue
def isClosedOrError(self):
return self._state == self.STATE_ERROR or self._state == self.STATE_CLOSED_WITH_ERROR or self._state == self.STATE_CLOSED
def isError(self):
return self._state == self.STATE_ERROR or self._state == self.STATE_CLOSED_WITH_ERROR
def isOperational(self):
return self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PRINTING or self._state == self.STATE_PAUSED or self._state == self.STATE_TRANSFERING_FILE
def isPrinting(self):
return self._state == self.STATE_PRINTING
def isSdPrinting(self):
return self.isSdFileSelected() and self.isPrinting()
def isSdFileSelected(self):
return self._currentFile is not None and isinstance(self._currentFile, PrintingSdFileInformation)
def isStreaming(self):
return self._currentFile is not None and isinstance(self._currentFile, StreamingGcodeFileInformation)
def isPaused(self):
return self._state == self.STATE_PAUSED
def isBusy(self):
return self.isPrinting() or self.isPaused()
def isSdReady(self):
return self._sdAvailable
def getPrintProgress(self):
if self._currentFile is None:
return None
return self._currentFile.getProgress()
def getPrintFilepos(self):
if self._currentFile is None:
return None
return self._currentFile.getFilepos()
def getPrintTime(self):
if self._currentFile is None or self._currentFile.getStartTime() is None:
return None
else:
return time.time() - self._currentFile.getStartTime()
def getPrintTimeRemainingEstimate(self):
printTime = self.getPrintTime()
if printTime is None:
return None
printTime /= 60
progress = self._currentFile.getProgress()
if progress:
printTimeTotal = printTime / progress
return printTimeTotal - printTime
else:
return None
def getTemp(self):
return self._temp
def getBedTemp(self):
return self._bedTemp
##~~ external interface
def close(self, isError = False):
printing = self.isPrinting() or self.isPaused()
if self._serial is not None:
self._serial.close()
if isError:
self._changeState(self.STATE_CLOSED_WITH_ERROR)
else:
self._changeState(self.STATE_CLOSED)
self._serial = None
if settings().get(["feature", "sdSupport"]):
self._sdFileList = []
if printing:
eventManager().fire("PrintFailed")
eventManager().fire("Disconnected")
def sendCommand(self, cmd):
cmd = cmd.encode('ascii', 'replace')
if self.isPrinting() and not self.isSdFileSelected():
self._commandQueue.put(cmd)
elif self.isOperational():
self._sendCommand(cmd)
def startPrint(self):
if not self.isOperational() or self.isPrinting():
return
if self._currentFile is None:
raise ValueError("No file selected for printing")
self._printSection = "CUSTOM"
self._changeState(self.STATE_PRINTING)
eventManager().fire("PrintStarted", self._currentFile.getFilename())
try:
self._currentFile.start()
if self.isSdFileSelected():
if self.isPaused():
self.sendCommand("M26 S0")
self._currentFile.setFilepos(0)
self.sendCommand("M24")
else:
self._sendNext()
except:
self._errorValue = getExceptionString()
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
def startFileTransfer(self, filename, remoteFilename):
if not self.isOperational() or self.isBusy():
return
self._currentFile = StreamingGcodeFileInformation(filename)
self._currentFile.start()
self.sendCommand("M28 %s" % remoteFilename)
eventManager().fire("TransferStart", remoteFilename)
self._callback.mcFileTransferStarted(remoteFilename, self._currentFile.getFilesize())
def selectFile(self, filename, sd):
if self.isBusy():
return
if sd:
if not self.isOperational():
# printer is not connected, can't use SD
return
self.sendCommand("M23 %s" % filename)
else:
self._currentFile = PrintingGcodeFileInformation(filename)
eventManager().fire("FileSelected", filename)
self._callback.mcFileSelected(filename, self._currentFile.getFilesize(), False)
def unselectFile(self):
if self.isBusy():
return
self._currentFile = None
eventManager().fire("FileSelected", None)
self._callback.mcFileSelected(None, None, False)
def cancelPrint(self):
if not self.isOperational() or self.isStreaming():
return
self._changeState(self.STATE_OPERATIONAL)
if self.isSdFileSelected():
self.sendCommand("M25") # pause print
self.sendCommand("M26 S0") # reset position in file to byte 0
eventManager().fire("PrintCancelled")
def setPause(self, pause):
if self.isStreaming():
return
if not pause and self.isPaused():
self._changeState(self.STATE_PRINTING)
if self.isSdFileSelected():
self.sendCommand("M24")
else:
self._sendNext()
if pause and self.isPrinting():
self._changeState(self.STATE_PAUSED)
if self.isSdFileSelected():
self.sendCommand("M25") # pause print
eventManager().fire("Paused")
def getSdFiles(self):
return self._sdFiles
def startSdFileTransfer(self, filename):
if not self.isOperational() or self.isBusy():
return
self._changeState(self.STATE_TRANSFERING_FILE)
self.sendCommand("M28 %s" % filename.lower())
def endSdFileTransfer(self, filename):
if not self.isOperational() or self.isBusy():
return
self.sendCommand("M29 %s" % filename.lower())
self._changeState(self.STATE_OPERATIONAL)
self.refreshSdFiles()
def deleteSdFile(self, filename):
if not self.isOperational() or (self.isBusy() and
isinstance(self._currentFile, PrintingSdFileInformation) and
self._currentFile.getFilename() == filename):
# do not delete a file from sd we are currently printing from
return
self.sendCommand("M30 %s" % filename.lower())
self.refreshSdFiles()
def refreshSdFiles(self):
if not self.isOperational() or self.isBusy():
return
self.sendCommand("M20")
def initSdCard(self):
if not self.isOperational():
return
self.sendCommand("M21")
def releaseSdCard(self):
if not self.isOperational() or (self.isBusy() and self.isSdFileSelected()):
# do not release the sd card if we are currently printing from it
return
self.sendCommand("M22")
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
self._callback.mcSdFiles(self._sdFiles)
##~~ communication monitoring and handling
def _monitor(self):
feedbackControls = settings().getFeedbackControls()
pauseTriggers = settings().getPauseTriggers()
#Open the serial port.
if self._port == 'AUTO':
self._changeState(self.STATE_DETECT_SERIAL)
programmer = stk500v2.Stk500v2()
self._log("Serial port list: %s" % (str(serialList())))
for p in serialList():
try:
self._log("Connecting to: %s" % (p))
programmer.connect(p)
self._serial = programmer.leaveISP()
break
except ispBase.IspError as (e):
self._log("Error while connecting to %s: %s" % (p, str(e)))
pass
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (p, getExceptionString()))
programmer.close()
elif self._port == 'VIRTUAL':
self._changeState(self.STATE_OPEN_SERIAL)
self._serial = VirtualPrinter()
else:
self._changeState(self.STATE_OPEN_SERIAL)
try:
self._log("Connecting to: %s" % (self._port))
if self._baudrate == 0:
self._serial = serial.Serial(str(self._port), 115200, timeout=0.1, writeTimeout=10000)
else:
self._serial = serial.Serial(str(self._port), self._baudrate, timeout=settings().getFloat(["serial", "timeout", "connection"]), writeTimeout=10000)
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (self._port, getExceptionString()))
if self._serial == None:
self._log("Failed to open serial port (%s)" % (self._port))
self._errorValue = 'Failed to autodetect serial port.'
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
return
self._log("Connected to: %s, starting monitor" % (self._serial))
if self._baudrate == 0:
self._changeState(self.STATE_DETECT_BAUDRATE)
else:
self._changeState(self.STATE_CONNECTING)
#Start monitoring the serial port.
timeout = getNewTimeout("communication")
tempRequestTimeout = timeout
sdStatusRequestTimeout = timeout
startSeen = not settings().getBoolean(["feature", "waitForStartOnConnect"])
heatingUp = False
while True:
try:
line = self._readline()
if line == None:
break
##~~ Error handling
# No matter the state, if we see an error, goto the error state and store the error for reference.
if line.startswith('Error:'):
#Oh YEAH, consistency.
# Marlin reports an MIN/MAX temp error as "Error:x\n: Extruder switched off. MAXTEMP triggered !\n"
# But a bed temp error is reported as "Error: Temperature heated bed switched off. MAXTEMP triggered !!"
# So we can have an extra newline in the most common case. Awesome work people.
if re.match('Error:[0-9]\n', line):
line = line.rstrip() + self._readline()
#Skip the communication errors, as those get corrected.
if 'checksum mismatch' in line \
or 'Wrong checksum' in line \
or 'Line Number is not Last Line Number' in line \
or 'expected line' in line \
or 'No Line Number with checksum' in line \
or 'No Checksum with line number' in line \
or 'Missing checksum' in line:
pass
elif not self.isError():
self._errorValue = line[6:]
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
##~~ SD file list
# if we are currently receiving an sd file list, each line is just a filename, so just read it and abort processing
if self._sdFileList and not 'End file list' in line:
self._sdFiles.append(line.strip().lower())
continue
##~~ Temperature processing
if ' T:' in line or line.startswith('T:'):
try:
self._temp = float(re.search("-?[0-9\.]*", line.split('T:')[1]).group(0))
if ' B:' in line:
self._bedTemp = float(re.search("-?[0-9\.]*", line.split(' B:')[1]).group(0))
self._callback.mcTempUpdate(self._temp, self._bedTemp, self._targetTemp, self._bedTargetTemp)
except ValueError:
# catch conversion issues, we'll rather just not get the temperature update instead of killing the connection
pass
#If we are waiting for an M109 or M190 then measure the time we lost during heatup, so we can remove that time from our printing time estimate.
if not 'ok' in line:
heatingUp = True
if self._heatupWaitStartTime != 0:
t = time.time()
self._heatupWaitTimeLost = t - self._heatupWaitStartTime
self._heatupWaitStartTime = t
##~~ SD Card handling
elif 'SD init fail' in line:
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Not SD printing' in line:
if self.isSdFileSelected() and self.isPrinting():
# something went wrong, printer is reporting that we actually are not printing right now...
self._sdFilePos = 0
self._changeState(self.STATE_OPERATIONAL)
elif 'SD card ok' in line:
self._sdAvailable = True
self.refreshSdFiles()
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Begin file list' in line:
self._sdFiles = []
self._sdFileList = True
elif 'End file list' in line:
self._sdFileList = False
self._callback.mcSdFiles(self._sdFiles)
elif 'SD printing byte' in line:
# answer to M27, at least on Marlin, Repetier and Sprinter: "SD printing byte %d/%d"
match = re.search("([0-9]*)/([0-9]*)", line)
self._currentFile.setFilepos(int(match.group(1)))
self._callback.mcProgress()
elif 'File opened' in line:
# answer to M23, at least on Marlin, Repetier and Sprinter: "File opened:%s Size:%d"
match = re.search("File opened:\s*(.*?)\s+Size:\s*([0-9]*)", line)
self._currentFile = PrintingSdFileInformation(match.group(1), int(match.group(2)))
elif 'File selected' in line:
# final answer to M23, at least on Marlin, Repetier and Sprinter: "File selected"
self._callback.mcFileSelected(self._currentFile.getFilename(), self._currentFile.getFilesize(), True)
eventManager().fire("FileSelected", self._currentFile.getFilename())
elif 'Writing to file' in line:
# anwer to M28, at least on Marlin, Repetier and Sprinter: "Writing to file: %s"
self._printSection = "CUSTOM"
self._changeState(self.STATE_PRINTING)
elif 'Done printing file' in line:
# printer is reporting file finished printing
self._sdFilePos = 0
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire("PrintDone")
##~~ Message handling
elif line.strip() != '' and line.strip() != 'ok' and not line.startswith("wait") and not line.startswith('Resend:') and line != 'echo:Unknown command:""\n' and self.isOperational():
self._callback.mcMessage(line)
##~~ Parsing for feedback commands
if feedbackControls:
for name, matcher, template in feedbackControls:
try:
match = matcher.search(line)
if match is not None:
self._callback.mcReceivedRegisteredMessage(name, str.format(template, *(match.groups("n/a"))))
except:
# ignored on purpose
pass
##~~ Parsing for pause triggers
if pauseTriggers:
if "enable" in pauseTriggers.keys() and pauseTriggers["enable"].search(line) is not None:
self.setPause(True)
elif "disable" in pauseTriggers.keys() and pauseTriggers["disable"].search(line) is not None:
self.setPause(False)
elif "toggle" in pauseTriggers.keys() and pauseTriggers["toggle"].search(line) is not None:
self.setPause(not self.isPaused())
if "ok" in line and heatingUp:
heatingUp = False
### Baudrate detection
if self._state == self.STATE_DETECT_BAUDRATE:
if line == '' or time.time() > timeout:
if len(self._baudrateDetectList) < 1:
self.close()
self._errorValue = "No more baudrates to test, and no suitable baudrate found."
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
elif self._baudrateDetectRetry > 0:
self._baudrateDetectRetry -= 1
self._serial.write('\n')
self._log("Baudrate test retry: %d" % (self._baudrateDetectRetry))
self._sendCommand("M105")
self._testingBaudrate = True
else:
baudrate = self._baudrateDetectList.pop(0)
try:
self._serial.baudrate = baudrate
self._serial.timeout = settings().getFloat(["serial", "timeout", "detection"])
self._log("Trying baudrate: %d" % (baudrate))
self._baudrateDetectRetry = 5
self._baudrateDetectTestOk = 0
timeout = getNewTimeout("communication")
self._serial.write('\n')
self._sendCommand("M105")
self._testingBaudrate = True
except:
self._log("Unexpected error while setting baudrate: %d %s" % (baudrate, getExceptionString()))
elif 'ok' in line and 'T:' in line:
self._baudrateDetectTestOk += 1
if self._baudrateDetectTestOk < 10:
self._log("Baudrate test ok: %d" % (self._baudrateDetectTestOk))
self._sendCommand("M105")
else:
self._sendCommand("M999")
self._serial.timeout = settings().getFloat(["serial", "timeout", "connection"])
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
eventManager().fire("Connected", "%s at %s baud" % (self._port, self._baudrate))
else:
self._testingBaudrate = False
### Connection attempt
elif self._state == self.STATE_CONNECTING:
if (line == "" or "wait" in line) and startSeen:
self._sendCommand("M105")
elif "start" in line:
startSeen = True
elif "ok" in line and startSeen:
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
eventManager().fire("Connected", "%s at %s baud" % (self._port, self._baudrate))
elif time.time() > timeout:
self.close()
### Operational
elif self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PAUSED:
#Request the temperature on comm timeout (every 5 seconds) when we are not printing.
if line == "" or "wait" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty():
self._sendCommand(self._commandQueue.get())
else:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("communication")
# resend -> start resend procedure from requested line
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
self._handleResendRequest(line)
### Printing
elif self._state == self.STATE_PRINTING:
if line == "" and time.time() > timeout:
self._log("Communication timeout during printing, forcing a line")
line = 'ok'
if self.isSdPrinting():
if time.time() > tempRequestTimeout and not heatingUp:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("communication")
if time.time() > sdStatusRequestTimeout and not heatingUp:
self._sendCommand("M27")
sdStatusRequestTimeout = time.time() + 1
if 'ok' or 'SD printing byte' in line:
timeout = getNewTimeout("communication")
else:
# Even when printing request the temperature every 5 seconds.
if time.time() > tempRequestTimeout and not self.isStreaming():
self._commandQueue.put("M105")
tempRequestTimeout = getNewTimeout("communication")
if 'ok' in line:
timeout = getNewTimeout("communication")
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty() and not self.isStreaming():
self._sendCommand(self._commandQueue.get())
else:
self._sendNext()
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
self._handleResendRequest(line)
except:
self._logger.exception("Something crashed inside the serial connection loop, please report this in OctoPrint's bug tracker:")
errorMsg = "See octoprint.log for details"
self._log(errorMsg)
self._errorValue = errorMsg
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
self._log("Connection closed, closing down monitor")
def _readline(self):
if self._serial == None:
return None
try:
ret = self._serial.readline()
except:
self._log("Unexpected error while reading serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
return None
if ret == '':
#self._log("Recv: TIMEOUT")
return ''
self._log("Recv: %s" % (unicode(ret, 'ascii', 'replace').encode('ascii', 'replace').rstrip()))
return ret
def _sendNext(self):
with self._sendNextLock:
line = self._currentFile.getNext()
if line is None:
if self.isStreaming():
self._sendCommand("M29")
filename = self._currentFile.getFilename()
self._currentFile = None
self._callback.mcFileTransferDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire("TransferDone", filename)
else:
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire("PrintDone", self._currentFile.getFilename())
return
if type(line) is tuple:
self._printSection = line[1]
line = line[0]
self._sendCommand(line, True)
self._callback.mcProgress()
def _handleResendRequest(self, line):
lineToResend = None
try:
lineToResend = int(line.replace("N:"," ").replace("N"," ").replace(":"," ").split()[-1])
except:
if "rs" in line:
lineToResend = int(line.split()[1])
if lineToResend is not None:
self._resendDelta = self._currentLine - lineToResend
if self._resendDelta > len(self._lastLines) or len(self._lastLines) == 0:
self._errorValue = "Printer requested line %d but no sufficient history is available, can't resend" % lineToResend
self._logger.warn(self._errorValue)
if self.isPrinting():
# abort the print, there's nothing we can do to rescue it now
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
else:
# reset resend delta, we can't do anything about it
self._resendDelta = None
else:
self._resendNextCommand()
def _resendNextCommand(self):
# Make sure we are only handling one sending job at a time
with self._sendingLock:
self._logger.debug("Resending line %d, delta is %d, history log is %s items strong" % (self._currentLine - self._resendDelta, self._resendDelta, len(self._lastLines)))
cmd = self._lastLines[-self._resendDelta]
lineNumber = self._currentLine - self._resendDelta
self._doSendWithChecksum(cmd, lineNumber)
self._resendDelta -= 1
if self._resendDelta <= 0:
self._resendDelta = None
def _sendCommand(self, cmd, sendChecksum=False):
# Make sure we are only handling one sending job at a time
with self._sendingLock:
if self._serial is None:
return
if not self.isStreaming():
gcode = re.search("^\s*([GM]\d+)", cmd)
if gcode:
gcode = gcode.group(1)
if gcode in gcodeToEvent:
eventManager().fire(gcodeToEvent[gcode])
gcodeHandler = "_gcode_" + gcode
if hasattr(self, gcodeHandler):
cmd = getattr(self, gcodeHandler)(cmd)
if cmd is not None:
self._doSend(cmd, sendChecksum)
def _doSend(self, cmd, sendChecksum=False):
if sendChecksum or self._alwaysSendChecksum:
lineNumber = self._currentLine
self._addToLastLines(cmd)
self._currentLine += 1
self._doSendWithChecksum(cmd, lineNumber)
else:
self._doSendWithoutChecksum(cmd)
def _doSendWithChecksum(self, cmd, lineNumber):
self._logger.debug("Sending cmd '%s' with lineNumber %r" % (cmd, lineNumber))
commandToSend = "N%d %s" % (lineNumber, cmd)
checksum = reduce(lambda x,y:x^y, map(ord, commandToSend))
commandToSend = "%s*%d" % (commandToSend, checksum)
self._doSendWithoutChecksum(commandToSend)
def _doSendWithoutChecksum(self, cmd):
self._log("Send: %s" % cmd)
try:
self._serial.write(cmd + '\n')
except serial.SerialTimeoutException:
self._log("Serial timeout while writing to serial port, trying again.")
try:
self._serial.write(cmd + '\n')
except:
self._log("Unexpected error while writing serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
except:
self._log("Unexpected error while writing serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
def _gcode_G0(self, cmd):
if 'Z' in cmd:
try:
z = float(re.search('Z([0-9\.]*)', cmd).group(1))
if self._currentZ != z:
self._currentZ = z
self._callback.mcZChange(z)
except ValueError:
pass
return cmd
_gcode_G1 = _gcode_G0
def _gcode_M0(self, cmd):
self.setPause(True)
return "M105" # Don't send the M0 or M1 to the machine, as M0 and M1 are handled as an LCD menu pause.
_gcode_M1 = _gcode_M0
def _gcode_M104(self, cmd):
match = re.search('S([0-9]+)', cmd)
if match:
try:
self._targetTemp = float(match.group(1))
except ValueError:
pass
return cmd
def _gcode_M140(self, cmd):
match = re.search('S([0-9]+)', cmd)
if match:
try:
self._bedTargetTemp = float(match.group(1))
except ValueError:
pass
return cmd
def _gcode_M109(self, cmd):
self._heatupWaitStartTime = time.time()
return self._gcode_M104(cmd)
def _gcode_M190(self, cmd):
self._heatupWaitStartTime = time.time()
return self._gcode_M140(cmd)
def _gcode_M110(self, cmd):
newLineNumber = None
match = re.search("N([0-9]+)", cmd)
if match:
try:
newLineNumber = int(match.group(1))
except:
pass
else:
newLineNumber = 0
# send M110 command with new line number
self._doSendWithChecksum(cmd, newLineNumber)
self._currentLine = newLineNumber + 1
# after a reset of the line number we have no way to determine what line exactly the printer now wants
self._lastLines.clear()
self._resendDelta = None
return None
