def test_poweroff(self):
"""Measure system power off time
@fn test_poweroff
@param self
@return
"""
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
port = "/dev/ttyACM0"
running = True
search_s = "Poweroff time: "
ser = serial.Serial(port, 9600, timeout=5.0)
time.sleep(2) #wait for serial port available
ser.write('s') #ask arduino to check power singnal
(status, out)=self.target.run('poweroff &')
while running:
data = ser.readline()
print data
i = data.find(search_s)
if (i != -1):
running = False
time_p = data[(i+len(search_s)):]
poweroff_t = str(float(time_p)/1000.0) + "s"
collect_pnp_log(casename, casename, poweroff_t)
print "\n%s:%s\n" % (casename, poweroff_t)
##
# TESTPOINT: #1, test_poweroff
#
self.assertEqual(status, 0, poweroff_t)
ser.write('o') #ask arduino to power on device
ser.close()
def test_netperf(self):
"""Use Netperf to measure network bandwidth
@fn test_netperf
@param self
@return
"""
self._setup()
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
(status, output) = self.target.run(
"/tmp/netperf -t TCP_STREAM -l 60 -H %s"
">/tmp/netperf-detail.log" % self.target.server_ip)
(status, output) = self.target.run(
"cat /tmp/netperf-detail.log | tail -1 | awk '{print $5}'")
netperf_res = output + "Mb/s"
collect_pnp_log(casename, casename, netperf_res)
print "\n%s:%s\n" % (casename, netperf_res)
##
# TESTPOINT: #1, test_netperf
#
self.assertEqual(status, 0, netperf_res)
(status, output) = self.target.run(
"cat /tmp/netperf-detail.log")
logname = casename + "-detail"
collect_pnp_log(casename, logname, output)
def test_cpuusage(self):
"""Measure system idle CPU usage
@fn test_cpuusage
@param self
@return
"""
# self._reboot()
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
(status, output) = self.target.run(
"top -b -d 10 -n 12 >/tmp/top.log")
(status, output) = self.target.run(
"cat /tmp/top.log | grep -i 'CPU' | grep 'id*' | "
"tail -10 | awk '{print $8}' | "
"awk -F '%' '{sum+=$1} END {print sum/NR}'")
cpu_idle = float(output)
cpu_idle = float("{0:.2f}".format(cpu_idle))
cpu_used = str(100 - cpu_idle) + "%"
collect_pnp_log(casename, casename, cpu_used)
print "\n%s:%s\n" % (casename, cpu_used)
##
# TESTPOINT: #1, test_cpuusage
#
self.assertEqual(status, 0, cpu_used)
(status, output) = self.target.run(
"cat /tmp/top.log")
logname = casename + "-topinfo"
collect_pnp_log(casename, logname, output)
def test_netperf(self):
"""Use Netperf to measure network bandwidth
@fn test_netperf
@param self
@return
"""
self._setup()
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
(status, output) = self.target.run(
"/tmp/netperf -t TCP_STREAM -l 60 -H %s"
">/tmp/netperf-detail.log" % self.target.server_ip)
(status, output) = self.target.run(
"cat /tmp/netperf-detail.log | tail -1 | awk '{print $5}'")
netperf_res = output + "Mb/s"
collect_pnp_log(casename, casename, netperf_res)
print "\n%s:%s\n" % (casename, netperf_res)
##
# TESTPOINT: #1, test_netperf
#
self.assertEqual(status, 0, netperf_res)
(status, output) = self.target.run("cat /tmp/netperf-detail.log")
logname = casename + "-detail"
collect_pnp_log(casename, logname, output)
def test_mem(self):
"""Mem_Used = Mem_Total - Mem_Available
@fn test_mem
@param self
@return
"""
# self._reboot()
self._setup()
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
(status, output) = self.target.run(
"cat /proc/meminfo" " | grep 'MemTotal' | awk '{print $2}'")
mem_total = int(output)
(status, output) = self.target.run(
"cat /proc/meminfo" " | grep 'MemAvailable' | awk '{print $2}'")
mem_available = int(output)
mem_used = str(mem_total - mem_available) + "KB"
collect_pnp_log(casename, casename, mem_used)
print "\n%s:%s\n" % (casename, mem_used)
##
# TESTPOINT: #1, test_mem
#
self.assertEqual(status, 0, mem_used)
(status, output) = self.target.run(
"cat /proc/meminfo")
logname = casename + "-meminfo"
collect_pnp_log(casename, logname, output)
def test_power(self):
"""Measure power consumption
@fn test_power
@param self
@return
"""
self._setup()
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
powermonitor = "/dev/ttyUSB0"
resistance = 0
voltage = 12
measure_time = 120
(status, output) = shell_cmd_timeout(
"timeout %d rs2 %s %d %d > /tmp/power.log" %
(measure_time, powermonitor, resistance, voltage))
(status,
output) = shell_cmd_timeout("cat /tmp/power.log | "
"awk '{sum+=$4} END {print sum/NR}'")
##
# TESTPOINT: #1, test_power
#
self.assertEqual(status, 0, output)
collect_pnp_log(casename, casename, output)
print "\n%s:%s\n" % (casename, output)
(status, output) = shell_cmd_timeout("cat /tmp/power.log")
logname = casename + "-detail"
collect_pnp_log(casename, logname, output)
def test_power(self):
"""Measure power consumption
@fn test_power
@param self
@return
"""
self._setup()
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
powermonitor="/dev/ttyUSB0"
resistance=0
voltage=12
measure_time=120
(status, output) = shell_cmd_timeout("timeout %d rs2 %s %d %d > /tmp/power.log"
% (measure_time, powermonitor, resistance, voltage))
(status, output) = shell_cmd_timeout("cat /tmp/power.log | "
"awk '{sum+=$4} END {print sum/NR}'")
##
# TESTPOINT: #1, test_power
#
self.assertEqual(status, 0, output)
collect_pnp_log(casename, casename, output)
print "\n%s:%s\n" % (casename, output)
(status, output) = shell_cmd_timeout(
"cat /tmp/power.log")
logname = casename + "-detail"
collect_pnp_log(casename, logname, output)
def test_cpuusage(self):
"""Measure system idle CPU usage
@fn test_cpuusage
@param self
@return
"""
# self._reboot()
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
(status, output) = self.target.run("top -b -d 10 -n 12 >/tmp/top.log")
(status, output) = self.target.run(
"cat /tmp/top.log | grep -i 'CPU' | grep 'id*' | "
"tail -10 | awk '{print $8}' | "
"awk -F '%' '{sum+=$1} END {print sum/NR}'")
cpu_idle = float(output)
cpu_idle = float("{0:.2f}".format(cpu_idle))
cpu_used = str(100 - cpu_idle) + "%"
collect_pnp_log(casename, casename, cpu_used)
print "\n%s:%s\n" % (casename, cpu_used)
##
# TESTPOINT: #1, test_cpuusage
#
self.assertEqual(status, 0, cpu_used)
(status, output) = self.target.run("cat /tmp/top.log")
logname = casename + "-topinfo"
collect_pnp_log(casename, logname, output)
def test_mem(self):
"""Mem_Used = Mem_Total - Mem_Available
@fn test_mem
@param self
@return
"""
# self._reboot()
self._setup()
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
(status,
output) = self.target.run("cat /proc/meminfo"
" | grep 'MemTotal' | awk '{print $2}'")
mem_total = int(output)
(status,
output) = self.target.run("cat /proc/meminfo"
" | grep 'MemAvailable' | awk '{print $2}'")
mem_available = int(output)
mem_used = str(mem_total - mem_available) + "KB"
collect_pnp_log(casename, casename, mem_used)
print "\n%s:%s\n" % (casename, mem_used)
##
# TESTPOINT: #1, test_mem
#
self.assertEqual(status, 0, mem_used)
(status, output) = self.target.run("cat /proc/meminfo")
logname = casename + "-meminfo"
collect_pnp_log(casename, logname, output)
def test_reboottime(self):
"""Measure system reboot time
@fn test_reboottime
@param self
@return
"""
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
(status, out) = self.target.run('date +"%m-%d %H:%M:%S"; reboot &')
print "\nReboot start time: %s\n" % (out)
start_t = datetime.strptime(out, "%m-%d %H:%M:%S")
#print start_t
time.sleep(60)
(status, out) = self.target.run("journalctl -b -a >/tmp/system.log")
##
# TESTPOINT: #1, test_reboottime
#
self.assertEqual(status, 0, msg="Error messages: %s" % out)
(status, out) = self.target.run(" cat /tmp/system.log | "
"grep 'Starting Login' | "
"awk '{print $1, $2, $3}'")
##
# TESTPOINT: #2, test_reboottime
#
self.assertEqual(status, 0, msg="Error messages: %s" % out)
print "\nReboot end time: %s\n" % (out)
end_t = datetime.strptime(out, "%b %d %H:%M:%S")
#print end_t
used_t = end_t - start_t
reboot_time = used_t.total_seconds()
reboot_time_str = str(reboot_time) + "s"
if (reboot_time <= 0):
print "please check system date:\n"
print reboot_time_str
##
# TESTPOINT: #3, test_reboottime
#
self.assertEqual(-1, 0, reboot_time_str)
else:
collect_pnp_log(casename, casename, reboot_time_str)
print "\n%s:%s\n" % (casename, reboot_time_str)
##
# TESTPOINT: #4, test_reboottime
#
self.assertEqual(status, 0, reboot_time_str)
def test_reboottime(self):
"""Measure system reboot time
@fn test_reboottime
@param self
@return
"""
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
(status, out)=self.target.run('date +"%m-%d %H:%M:%S"; reboot &')
print "\nReboot start time: %s\n" % (out)
start_t = datetime.strptime(out,"%m-%d %H:%M:%S")
#print start_t
time.sleep(60)
(status, out)=self.target.run("journalctl -b -a >/tmp/system.log")
##
# TESTPOINT: #1, test_reboottime
#
self.assertEqual(status, 0, msg="Error messages: %s" % out)
(status, out)=self.target.run(" cat /tmp/system.log | "
"grep 'Starting Login' | "
"awk '{print $1, $2, $3}'")
##
# TESTPOINT: #2, test_reboottime
#
self.assertEqual(status, 0, msg="Error messages: %s" % out)
print "\nReboot end time: %s\n" % (out)
end_t = datetime.strptime(out,"%b %d %H:%M:%S")
#print end_t
used_t = end_t -start_t
reboot_time = used_t.total_seconds()
reboot_time_str = str(reboot_time) + "s"
if(reboot_time <= 0):
print "please check system date:\n"
print reboot_time_str
##
# TESTPOINT: #3, test_reboottime
#
self.assertEqual(-1, 0, reboot_time_str)
else:
collect_pnp_log(casename, casename, reboot_time_str)
print "\n%s:%s\n" % (casename, reboot_time_str)
##
# TESTPOINT: #4, test_reboottime
#
self.assertEqual(status, 0, reboot_time_str)
def test_disksize(self):
"""use df command to calculate the image installed size
@fn test_disksize
@param self
@return
"""
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
(status, output) = self.target.run("df -h")
logname = casename + "-detail"
collect_pnp_log(casename, logname, output)
disksize = self._parse_result(casename, logname)
collect_pnp_log(casename, casename, disksize)
##
# TESTPOINT: #1, test_disksize
#
print "\n%s:%s\n" % (casename, output)
self.assertEqual(status, 0, output)
def test_disksize(self):
"""use df command to calculate the image installed size
@fn test_disksize
@param self
@return
"""
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
(status, output) = self.target.run("df -h")
logname = casename + "-detail"
collect_pnp_log(casename, logname, output)
disksize = self._parse_result(casename,logname)
collect_pnp_log(casename, casename, disksize)
##
# TESTPOINT: #1, test_disksize
#
print "\n%s:%s\n" % (casename, output)
self.assertEqual(status, 0, output)
def test_boot_time(self):
"""Measure boot time with systemd-analyze
@fn test_boot_time
@param self
@return
"""
self._setup()
time.sleep(60)
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
(status, output) = self.target.run("/tmp/systemd-analyze time")
result = self._parse_result(output)
boottime = str(result) + "s"
collect_pnp_log(casename, casename, boottime)
print "\n%s:%s\n" % (casename, boottime)
logname = casename + "-systemd-analyze"
collect_pnp_log(casename, logname, output)
##
# TESTPOINT: #1, test_boot_time
#
self.assertEqual(status, 0, output)
def test_boot_time(self):
"""Measure boot time with systemd-analyze
@fn test_boot_time
@param self
@return
"""
self._setup()
time.sleep(60)
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
(status, output) = self.target.run("/tmp/systemd-analyze time")
result = self._parse_result(output)
boottime = str(result)+"s"
collect_pnp_log(casename, casename, boottime)
print "\n%s:%s\n" % (casename, boottime)
logname = casename + "-systemd-analyze"
collect_pnp_log(casename, logname, output)
##
# TESTPOINT: #1, test_boot_time
#
self.assertEqual(status, 0, output)
def test_iozone(self):
"""Use IOzone to measure storage read/write speed
@fn test_iozone
@param self
@return
"""
self._setup()
filename = os.path.basename(__file__)
casename = os.path.splitext(filename)[0]
(status,
output) = self.target.run("/tmp/iozone -a -i 0 -i 1 -s 512M -r 1M"
">/tmp/iozone-detail.log")
(status,
output) = self.target.run("cat /tmp/iozone-detail.log | tail -4 | "
"grep '524288'| awk '{print $5/1024}'")
read_res = "Read: " + output + "MB/s"
(status,
output) = self.target.run("cat /tmp/iozone-detail.log | tail -4 | "
"grep '524288'| awk '{print $3/1024}'")
write_res = "Write:" + output + "MB/s"
collect_pnp_log(casename, casename, read_res)
collect_pnp_log(casename, casename, write_res)
print "\n%s:%s %s\n" % (casename, read_res, write_res)
##
# TESTPOINT: #1, test_iozone
#
self.assertEqual(status, 0, read_res)
(status, output) = self.target.run("cat /tmp/iozone-detail.log")
logname = casename + "-detail"
collect_pnp_log(casename, logname, output)
