예제 #1
0
    def __init__(self, config_dic):
        print 'beam scanner controller', config_dic
        self.ip = '192.168.1.62'
        self.port = 9988

        self.move_xy = MoveXY(self.ip, self.port)
        self.rotate = Rotate(self.ip, self.port)

        self.point = float(config_dic['total_points'])
        self.side_size = float(config_dic['size'])
        angle = float(config_dic['angle_to_measure'])

        angle_speed = float(config_dic['angle_speed'])

        self.rotate.start_connection()
        self.move_xy.start_connection()

        self.rotate.set_hspd(angle_speed)

        self.fast_sweep = config_dic['fast']

        if not self.rotate.move_absolute(angle):
            raise Exception('fail to rotate')

        if not self.move_xy.move_absolute(0.0,0.0):
            raise Exception('fail to position')

        from math import sqrt
        if self.fast_sweep:
            self.side_points = (self.point)/2
        else:
            self.side_points = sqrt(self.point)
        self.total_points = self.point

        self.distance_step = self.side_size/(self.side_points-1)
        print 'side', self.distance_step

        if self.fast_sweep:
            self.move_xy.move_absolute(0,-self.side_size/2)
        else:
            self.move_xy.move_absolute(-self.side_size/2,-self.side_size/2)

        self.rotate.close_connection()

        time.sleep(5)

        self.delta_x = 0
        self.prev_x_delta = self.distance_step
        self.delta_y = 0
예제 #2
0
    def __init__(self, config_dic):
        print 'beam scanner controller', config_dic
        self.ip = '192.168.1.62'
        self.port = 9988

        self.move_xy = MoveXY(self.ip, self.port)
        self.rotate = Rotate(self.ip, self.port)

        self.x = config_dic['x']
        self.y = config_dic['y']
        self.theta = config_dic['theta']

        angle_speed = float(config_dic['angle_speed'])

        self.rotate.start_connection()
        self.move_xy.start_connection()

        self.rotate.set_hspd(angle_speed)
예제 #3
0
class BeamScannerControllerTone(ToneDCSource):

    def __init__(self, config_dic):
        print 'beam scanner controller', config_dic
        self.ip = '192.168.1.62'
        self.port = 9988

        self.move_xy = MoveXY(self.ip, self.port)
        self.rotate = Rotate(self.ip, self.port)

        self.x = config_dic['x']
        self.y = config_dic['y']
        self.theta = config_dic['theta']

        angle_speed = float(config_dic['angle_speed'])

        self.rotate.start_connection()
        self.move_xy.start_connection()

        self.rotate.set_hspd(angle_speed)

    def turn_on(self):

        if not self.rotate.move_absolute(self.theta):
            raise Exception('fail to rotate')

        if not self.move_xy.move_absolute(self.x, self.y):
            raise Exception('fail to position')

    def stop_source(self):
        self.rotate.close_connection()
        self.move_xy.close_connection()

    def turn_off(self):
        if not self.rotate.move_absolute(0):
            raise Exception('fail to rotate')

        if not self.move_xy.move_absolute(0,0):
            raise Exception('fail to position')
예제 #4
0
    def __init__(self, **kwargs):
        super(BeamScanner, self).__init__(kwargs=kwargs)

        # activate the beam scanner

        self.active_state = False
        self.sweep_state = False
        sweep_label = Label(text='Do Sweep')
        self.sweep_switch = Switch(active=False)
        self.sweep_switch.bind(active=self.sweepe_or_not)



        sweep_layout = BoxLayout(orientation='horizontal', size_hint=(1,None), size=(1,40))
        sweep_layout.add_widget(sweep_label)
        sweep_layout.add_widget(self.sweep_switch)

        # this is the controll to move the beam scanner
        self.set_center = Button(text='Set Center', size_hint=(1, None), size=(1, 30))
        self.set_center.bind(on_press=self.set_zero_xy)
        self.move_up = Button(text='/\\', size_hint=(0.33, None), size=(1, 30))
        self.move_up.bind(on_press=self.move_up_beam)
        move_up_padding_l = Label(size_hint=(0.33, None), size=(1, 30))
        move_up_padding_r = Label(size_hint=(0.33, None), size=(1, 30))

        self.move_left = Button(text='<', size_hint=(0.33, None), size=(1, 30))
        self.move_left.bind(on_press=self.move_left_beam)
        self.move_rigth = Button(text='>', size_hint=(0.33, None), size=(1, 30))
        self.move_rigth.bind(on_press=self.move_rigth_beam)
        self.step_size = TextInput(size_hint=(0.33, None), size=(1, 30), multiline=False)
        self.step_size.text = '0.0'

        self.move_down = Button(text='\\/', size_hint=(0.33, None), size=(1, 30))
        self.move_down.bind(on_press=self.move_down_beam)
        move_down_padding_l = Label(size_hint=(0.33, None), size=(1, 30))
        move_down_padding_r = Label(size_hint=(0.33, None), size=(1, 30))

        move_top = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        move_top.add_widget(move_up_padding_l)
        move_top.add_widget(self.move_up)
        move_top.add_widget(move_up_padding_r)

        move_middle = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        move_middle.add_widget(self.move_left)
        move_middle.add_widget(self.step_size)
        move_middle.add_widget(self.move_rigth)

        move_bottom = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        move_bottom.add_widget(move_down_padding_l)
        move_bottom.add_widget(self.move_down)
        move_bottom.add_widget(move_down_padding_r)

        move_xy_layes = BoxLayout(orientation='vertical', size_hint=(1, None), size=(1, 120))

        move_xy_layes.add_widget(self.set_center)
        move_xy_layes.add_widget(move_top)
        move_xy_layes.add_widget(move_middle)
        move_xy_layes.add_widget(move_bottom)

        # this is the controll to rotate the beam scanner

        self.set_origin = Button(text='Set Zero', size_hint=(0.33, None), size=(1, 30))
        self.set_origin.bind(on_press=self.set_zero_ang)
        self.do_rotation = Button(text='Rotate to:', size_hint=(0.33, None), size=(1, 30))
        self.do_rotation.bind(on_press=self.rotate)
        self.destination_angle = TextInput(size_hint=(0.33, None), size=(1, 30), multiline=False)
        self.destination_angle.text = '0.0'

        rotation_layou = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        rotation_layou.add_widget(self.set_origin)
        rotation_layou.add_widget(self.do_rotation)
        rotation_layou.add_widget(self.destination_angle)

        # rotation speed

        speed_rotation = Label(text='Angular Speed', size_hint=(1, None), size=(1, 30))
        self.speed_rotation_value = TextInput(size_hint=(1, None), size=(1, 30))
        self.speed_rotation_value.text = '10.0'

        rotation_speed = BoxLayout(orientaion='horizontal', size_hint=(1, None), size=(1, 30))
        rotation_speed.add_widget(speed_rotation)
        rotation_speed.add_widget(self.speed_rotation_value)

        #  check the plane movility

        size_of_plane_label = Label(text='Plane size [mm]', size=(1, 30))
        self.size_of_plane_val = TextInput(size=(1, 30), multiline=False)
        self.size_of_plane_val.text = '0.0'
        self.size_of_plane_val.bind(focus=self.set_number_of_points)

        plane_size = BoxLayout(orientaion='horizontal', size_hint=(1, None), size=(1, 30))
        plane_size.add_widget(size_of_plane_label)
        plane_size.add_widget(self.size_of_plane_val)

        # configuration

        # frecuency

        frec_label = Label(text='Set Lambda [mm]: ', size_hint=(1, None), size=(1, 30))
        self.frec_value = TextInput(size_hint=(1, None), size=(1, 30), multiline=False)
        self.frec_value.text = '0.0'
        self.frec_value.bind(focus=self.set_number_of_points)

        frec_step = Label(text='Step factor: ', size_hint=(1, None), size=(1, 30))
        self.frec_step_value = TextInput(size_hint=(1, None), size=(1, 30), multiline=False)
        self.frec_step_value.text = '0.45'
        self.frec_step_value.bind(focus=self.set_number_of_points)

        frec_layout_val = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        frec_layout_val.add_widget(frec_label)
        frec_layout_val.add_widget(self.frec_value)

        frec_layout_step = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        frec_layout_step.add_widget(frec_step)
        frec_layout_step.add_widget(self.frec_step_value)

        frec_layout = BoxLayout(orientation='vertical', size_hint=(1, None), size=(1, 60))
        frec_layout.add_widget(frec_layout_val)
        frec_layout.add_widget(frec_layout_step)

        # display step

        step_label = Label(text='Number of Points: ')
        self.step_val = Label(text='0')

        display_step = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        display_step.add_widget(step_label)
        display_step.add_widget(self.step_val)

        # fast sweep enable

        self.fast_sweepp = ToggleButton(text='fast sweep', size_hint=(1,None), size=(1,30))

        # goto configuration

        goto_label = Label(text='Go to Position')
        self.goto_switch = Switch(active=False)
        self.goto_switch.bind(active=self.goto_or_not)

        x_dest = Label(text = 'x position [mm]')
        y_dest = Label(text = 'y position [mm]')
        theta_dest = Label(text = 'angle [Degree]')

        self.x_dest_val = TextInput(size_hint=(0.33, None), size=(1, 30), multiline=False)
        self.x_dest_val.text = '0.0'
        self.y_dest_val = TextInput(size_hint=(0.33, None), size=(1, 30), multiline=False)
        self.y_dest_val.text = '0.0'
        self.theta_dest_val = TextInput(size_hint=(0.33, None), size=(1, 30), multiline=False)
        self.theta_dest_val.text = '0.0'


        goto_layout = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        goto_layout.add_widget(goto_label)
        goto_layout.add_widget(self.goto_switch)

        goto_layout_x = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        goto_layout_x.add_widget(x_dest)
        goto_layout_x.add_widget(self.x_dest_val)

        goto_layout_y = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        goto_layout_y.add_widget(y_dest)
        goto_layout_y.add_widget(self.y_dest_val)

        goto_layout_theta = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        goto_layout_theta.add_widget(theta_dest)
        goto_layout_theta.add_widget(self.theta_dest_val)

        goto_switch = BoxLayout(orientation='vertical', size_hint=(1, None), size=(1, 120))
        goto_switch.add_widget(goto_layout)
        goto_switch.add_widget(goto_layout_x)
        goto_switch.add_widget(goto_layout_y)
        goto_switch.add_widget(goto_layout_theta)



        # big container configuration

        paddind = BoxLayout(size_hint=(1, 1), size=(1, 1000))

        self.big_one = BoxLayout(orientation='vertical')

        self.big_one.add_widget(sweep_layout)
        self.big_one.add_widget(move_xy_layes)
        self.big_one.add_widget(rotation_layou)
        self.big_one.add_widget(rotation_speed)
        self.big_one.add_widget(plane_size)
        self.big_one.add_widget(frec_layout)
        self.big_one.add_widget(display_step)
        self.big_one.add_widget(self.fast_sweepp)
        self.big_one.add_widget(goto_switch)
        self.big_one.add_widget(paddind)

        self.add_widget(self.big_one)



        # attributes that lets you connect to beam scanner

        self.ip_beam = '192.168.1.62'
        self.ip_port = 9988
        self.move_xy = MoveXY(self.ip_beam, self.ip_port)
        self.move_ang = Rotate(self.ip_beam, self.ip_port)

        # disconnect thread configuration

        self.monitor = threading.Event()
        self.disconnect = True
        self.launch_thread = False
예제 #5
0
class BeamScanner(AbstractSource):
    def __init__(self, **kwargs):
        super(BeamScanner, self).__init__(kwargs=kwargs)

        # activate the beam scanner

        self.active_state = False
        self.sweep_state = False
        sweep_label = Label(text='Do Sweep')
        self.sweep_switch = Switch(active=False)
        self.sweep_switch.bind(active=self.sweepe_or_not)



        sweep_layout = BoxLayout(orientation='horizontal', size_hint=(1,None), size=(1,40))
        sweep_layout.add_widget(sweep_label)
        sweep_layout.add_widget(self.sweep_switch)

        # this is the controll to move the beam scanner
        self.set_center = Button(text='Set Center', size_hint=(1, None), size=(1, 30))
        self.set_center.bind(on_press=self.set_zero_xy)
        self.move_up = Button(text='/\\', size_hint=(0.33, None), size=(1, 30))
        self.move_up.bind(on_press=self.move_up_beam)
        move_up_padding_l = Label(size_hint=(0.33, None), size=(1, 30))
        move_up_padding_r = Label(size_hint=(0.33, None), size=(1, 30))

        self.move_left = Button(text='<', size_hint=(0.33, None), size=(1, 30))
        self.move_left.bind(on_press=self.move_left_beam)
        self.move_rigth = Button(text='>', size_hint=(0.33, None), size=(1, 30))
        self.move_rigth.bind(on_press=self.move_rigth_beam)
        self.step_size = TextInput(size_hint=(0.33, None), size=(1, 30), multiline=False)
        self.step_size.text = '0.0'

        self.move_down = Button(text='\\/', size_hint=(0.33, None), size=(1, 30))
        self.move_down.bind(on_press=self.move_down_beam)
        move_down_padding_l = Label(size_hint=(0.33, None), size=(1, 30))
        move_down_padding_r = Label(size_hint=(0.33, None), size=(1, 30))

        move_top = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        move_top.add_widget(move_up_padding_l)
        move_top.add_widget(self.move_up)
        move_top.add_widget(move_up_padding_r)

        move_middle = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        move_middle.add_widget(self.move_left)
        move_middle.add_widget(self.step_size)
        move_middle.add_widget(self.move_rigth)

        move_bottom = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        move_bottom.add_widget(move_down_padding_l)
        move_bottom.add_widget(self.move_down)
        move_bottom.add_widget(move_down_padding_r)

        move_xy_layes = BoxLayout(orientation='vertical', size_hint=(1, None), size=(1, 120))

        move_xy_layes.add_widget(self.set_center)
        move_xy_layes.add_widget(move_top)
        move_xy_layes.add_widget(move_middle)
        move_xy_layes.add_widget(move_bottom)

        # this is the controll to rotate the beam scanner

        self.set_origin = Button(text='Set Zero', size_hint=(0.33, None), size=(1, 30))
        self.set_origin.bind(on_press=self.set_zero_ang)
        self.do_rotation = Button(text='Rotate to:', size_hint=(0.33, None), size=(1, 30))
        self.do_rotation.bind(on_press=self.rotate)
        self.destination_angle = TextInput(size_hint=(0.33, None), size=(1, 30), multiline=False)
        self.destination_angle.text = '0.0'

        rotation_layou = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        rotation_layou.add_widget(self.set_origin)
        rotation_layou.add_widget(self.do_rotation)
        rotation_layou.add_widget(self.destination_angle)

        # rotation speed

        speed_rotation = Label(text='Angular Speed', size_hint=(1, None), size=(1, 30))
        self.speed_rotation_value = TextInput(size_hint=(1, None), size=(1, 30))
        self.speed_rotation_value.text = '10.0'

        rotation_speed = BoxLayout(orientaion='horizontal', size_hint=(1, None), size=(1, 30))
        rotation_speed.add_widget(speed_rotation)
        rotation_speed.add_widget(self.speed_rotation_value)

        #  check the plane movility

        size_of_plane_label = Label(text='Plane size [mm]', size=(1, 30))
        self.size_of_plane_val = TextInput(size=(1, 30), multiline=False)
        self.size_of_plane_val.text = '0.0'
        self.size_of_plane_val.bind(focus=self.set_number_of_points)

        plane_size = BoxLayout(orientaion='horizontal', size_hint=(1, None), size=(1, 30))
        plane_size.add_widget(size_of_plane_label)
        plane_size.add_widget(self.size_of_plane_val)

        # configuration

        # frecuency

        frec_label = Label(text='Set Lambda [mm]: ', size_hint=(1, None), size=(1, 30))
        self.frec_value = TextInput(size_hint=(1, None), size=(1, 30), multiline=False)
        self.frec_value.text = '0.0'
        self.frec_value.bind(focus=self.set_number_of_points)

        frec_step = Label(text='Step factor: ', size_hint=(1, None), size=(1, 30))
        self.frec_step_value = TextInput(size_hint=(1, None), size=(1, 30), multiline=False)
        self.frec_step_value.text = '0.45'
        self.frec_step_value.bind(focus=self.set_number_of_points)

        frec_layout_val = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        frec_layout_val.add_widget(frec_label)
        frec_layout_val.add_widget(self.frec_value)

        frec_layout_step = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        frec_layout_step.add_widget(frec_step)
        frec_layout_step.add_widget(self.frec_step_value)

        frec_layout = BoxLayout(orientation='vertical', size_hint=(1, None), size=(1, 60))
        frec_layout.add_widget(frec_layout_val)
        frec_layout.add_widget(frec_layout_step)

        # display step

        step_label = Label(text='Number of Points: ')
        self.step_val = Label(text='0')

        display_step = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        display_step.add_widget(step_label)
        display_step.add_widget(self.step_val)

        # fast sweep enable

        self.fast_sweepp = ToggleButton(text='fast sweep', size_hint=(1,None), size=(1,30))

        # goto configuration

        goto_label = Label(text='Go to Position')
        self.goto_switch = Switch(active=False)
        self.goto_switch.bind(active=self.goto_or_not)

        x_dest = Label(text = 'x position [mm]')
        y_dest = Label(text = 'y position [mm]')
        theta_dest = Label(text = 'angle [Degree]')

        self.x_dest_val = TextInput(size_hint=(0.33, None), size=(1, 30), multiline=False)
        self.x_dest_val.text = '0.0'
        self.y_dest_val = TextInput(size_hint=(0.33, None), size=(1, 30), multiline=False)
        self.y_dest_val.text = '0.0'
        self.theta_dest_val = TextInput(size_hint=(0.33, None), size=(1, 30), multiline=False)
        self.theta_dest_val.text = '0.0'


        goto_layout = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        goto_layout.add_widget(goto_label)
        goto_layout.add_widget(self.goto_switch)

        goto_layout_x = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        goto_layout_x.add_widget(x_dest)
        goto_layout_x.add_widget(self.x_dest_val)

        goto_layout_y = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        goto_layout_y.add_widget(y_dest)
        goto_layout_y.add_widget(self.y_dest_val)

        goto_layout_theta = BoxLayout(orientation='horizontal', size_hint=(1, None), size=(1, 30))
        goto_layout_theta.add_widget(theta_dest)
        goto_layout_theta.add_widget(self.theta_dest_val)

        goto_switch = BoxLayout(orientation='vertical', size_hint=(1, None), size=(1, 120))
        goto_switch.add_widget(goto_layout)
        goto_switch.add_widget(goto_layout_x)
        goto_switch.add_widget(goto_layout_y)
        goto_switch.add_widget(goto_layout_theta)



        # big container configuration

        paddind = BoxLayout(size_hint=(1, 1), size=(1, 1000))

        self.big_one = BoxLayout(orientation='vertical')

        self.big_one.add_widget(sweep_layout)
        self.big_one.add_widget(move_xy_layes)
        self.big_one.add_widget(rotation_layou)
        self.big_one.add_widget(rotation_speed)
        self.big_one.add_widget(plane_size)
        self.big_one.add_widget(frec_layout)
        self.big_one.add_widget(display_step)
        self.big_one.add_widget(self.fast_sweepp)
        self.big_one.add_widget(goto_switch)
        self.big_one.add_widget(paddind)

        self.add_widget(self.big_one)



        # attributes that lets you connect to beam scanner

        self.ip_beam = '192.168.1.62'
        self.ip_port = 9988
        self.move_xy = MoveXY(self.ip_beam, self.ip_port)
        self.move_ang = Rotate(self.ip_beam, self.ip_port)

        # disconnect thread configuration

        self.monitor = threading.Event()
        self.disconnect = True
        self.launch_thread = False

    def sweepe_or_not(self, instance, value):
        if value:
            self.sweep_state = value
            self.goto_switch.active = False
        self.active_state = value

    def goto_or_not(self, instance, value):
        if value:
            self.sweep_state = False
            self.sweep_switch.active = False
        self.active_state = value

    def is_active(self):
        return self.active_state

    def do_sweep(self):
        return self.sweep_state

    # connecto to configure and move around
    def start_connection(self):
        self.disconnect = False
        if not self.launch_thread:
            try:
                self.move_xy.start_connection()
                self.move_ang.start_connection()
                threading.Thread(target=self.close_connection_timer).start()
                self.launch_thread = True
                try:
                    self.move_ang.set_hspd(float(self.speed_rotation_value.text))
                except:
                    pass
                return True
            except socket.error as e:
                Popup(title='Error BeamScanner', content=Label(text=e.message),
                      size_hint=(None, None), size=(200, 200)).open()
                return False
        return True

    def stop_connection(self):
        self.move_xy.close_connection()
        self.move_ang.close_connection()

    # movement of the beam scanner


    def move_left_beam(self, instance):
        if self.start_connection():
            try:
                if not self.move_xy.move_relative(float(self.step_size.text), 0):
                    self.stop_connection()
                    self.disconnect = True
            except Exception as e:
                self.stop_connection()

    def move_rigth_beam(self, instance):
        if self.start_connection():
            try:
                if not self.move_xy.move_relative(-float(self.step_size.text), 0):
                    self.stop_connection()
                    self.disconnect = True
            except Exception:
                self.stop_connection()

    def move_up_beam(self, instance):
        if self.start_connection():
            try:
                if not self.move_xy.move_relative(0, -float(self.step_size.text)):
                    self.stop_connection()
                    self.disconnect = True
            except Exception as e:
                self.stop_connection()

    def move_down_beam(self, instance):
        if self.start_connection():
            try:
                if not self.move_xy.move_relative(0, float(self.step_size.text)):
                    self.stop_connection()
                    self.disconnect = True
            except Exception as e:
                self.stop_connection()

    def rotate(self, instance):
        if self.start_connection():
            try:
                if not self.move_ang.move_absolute(float(self.destination_angle.text)):
                    self.stop_connection()
                    self.disconnect = True
            except Exception:
                self.stop_connection()

    def set_zero_xy(self, instance):
        if self.start_connection():
            try:
                if not self.move_xy.set_origin():
                    self.stop_connection()
                    self.disconnect = True
            except Exception:
                self.stop_connection()

    def set_zero_ang(self, instance):
        if self.start_connection():
            try:
                if not self.move_ang.set_origin():
                    self.stop_connection()
                    self.disconnect = True
            except Exception:
                self.stop_connection()

    def set_number_of_points(self, instance, value):
        try:
            lambda_ = float(self.frec_value.text)
            factor = float(self.frec_step_value.text)

            if lambda_*factor > 0:
                size = float(self.size_of_plane_val.text)
                points = int(0.5 + size/(lambda_*factor)) + 1
                self.step_val.text = str(points*points)
        except:
            pass

    # thead de apagado
    def close_connection_timer(self):
        print 'close function initiated'
        while 1:
            if self.disconnect:
                print 'closing function'
                self.stop_connection()
                break

            self.disconnect = True

            self.monitor.wait(15)

        self.launch_thread = False

    def get_source_config(self):
        return_dic = {}

        try :
            if self.sweep_state:
                return_dic['size'] = float(self.size_of_plane_val.text)

                return_dic['frec_number_point'] = (int(self.step_val.text))
                return_dic['angle_to_measure'] = float(self.destination_angle.text)

                return_dic['instance'] = BeamScannerController
                return_dic['angle_speed'] = float(self.speed_rotation_value.text)
                return_dic['name'] = self.get_my_name()
                return_dic['fast'] = self.fast_sweepp.state != 'normal'

                if return_dic['fast']:
                    return_dic['total_points'] = sqrt(int(self.step_val.text))*2
                    return_dic['frec_number_point'] = sqrt(int(self.step_val.text))*2
                else:
                    return_dic['total_points'] = int(self.step_val.text)
                    return_dic['frec_number_point'] = int(self.step_val.text)

            else:
                return_dic['angle_speed'] = float(self.speed_rotation_value.text)
                return_dic['name'] = self.get_my_name()
                return_dic['instance'] = BeamScannerControllerTone
                return_dic['x'] = float(self.x_dest_val.text)
                return_dic['y'] = float(self.y_dest_val.text)
                return_dic['theta'] = float(self.theta_dest_val.text)
        except:
            raise Exception('Please Enter Numbers only')


        return return_dic

    def get_my_name(self):
        return 'BeamScanner'

    def save_config_dictionary(self):
        dic_return = {}

        dic_return['on_off'] = self.active_state
        dic_return['sweep'] = self.sweep_state
        dic_return['size'] = self.size_of_plane_val.text
        dic_return['total_points'] = self.step_val.text
        dic_return['angle_to_measure'] = self.destination_angle.text
        dic_return['angle_speed'] = self.speed_rotation_value.text
        dic_return['x'] = float(self.x_dest_val.text)
        dic_return['y'] = float(self.y_dest_val.text)
        dic_return['theta'] = float(self.theta_dest_val.text)
        dic_return['lambda'] = self.frec_value.text
        dic_return['step_factor'] = self.step_size.text

        return {self.get_my_name():dic_return}

    def set_configuration(self, config_dictionary):
        if self.get_my_name() in config_dictionary:
            config_dictionary_ = config_dictionary[self.get_my_name()]
            self.active_state = config_dictionary_['on_off']
            self.sweep_state = config_dictionary_['sweep']
            self.size_of_plane_val.text = config_dictionary_['size']
            self.step_val.text = config_dictionary_['total_points']
            self.destination_angle.text = config_dictionary_['angle_to_measure']
            self.speed_rotation_value.text = config_dictionary_['angle_speed']
            self.x_dest_val.text = str(config_dictionary_['x'])
            self.y_dest_val.text = str(config_dictionary_['y'])
            self.theta_dest_val.text = str(config_dictionary_['theta'])
            self.frec_value.text = config_dictionary_['lambda']
            self.step_size.text = config_dictionary_['step_factor']

            if self.active_state:
                if self.sweep_state:
                    self.sweep_switch.active = True
                else:
                    self.goto_switch.active = True
            else:
                self.sweep_switch.active = False
                self.goto_switch.active = False
        else:
            self.sweep_switch.active = False
            self.goto_switch.active = False
예제 #6
0
class BeamScannerController(AbstractSource):

    def __init__(self, config_dic):
        print 'beam scanner controller', config_dic
        self.ip = '192.168.1.62'
        self.port = 9988

        self.move_xy = MoveXY(self.ip, self.port)
        self.rotate = Rotate(self.ip, self.port)

        self.point = float(config_dic['total_points'])
        self.side_size = float(config_dic['size'])
        angle = float(config_dic['angle_to_measure'])

        angle_speed = float(config_dic['angle_speed'])

        self.rotate.start_connection()
        self.move_xy.start_connection()

        self.rotate.set_hspd(angle_speed)

        self.fast_sweep = config_dic['fast']

        if not self.rotate.move_absolute(angle):
            raise Exception('fail to rotate')

        if not self.move_xy.move_absolute(0.0,0.0):
            raise Exception('fail to position')

        from math import sqrt
        if self.fast_sweep:
            self.side_points = (self.point)/2
        else:
            self.side_points = sqrt(self.point)
        self.total_points = self.point

        self.distance_step = self.side_size/(self.side_points-1)
        print 'side', self.distance_step

        if self.fast_sweep:
            self.move_xy.move_absolute(0,-self.side_size/2)
        else:
            self.move_xy.move_absolute(-self.side_size/2,-self.side_size/2)

        self.rotate.close_connection()

        time.sleep(5)

        self.delta_x = 0
        self.prev_x_delta = self.distance_step
        self.delta_y = 0

    def set_generator_fast_sweep(self, current_channel):
        if current_channel == 0:
            return

        self.delta_x = 0
        self.delta_y = 0
        if current_channel >= self.side_points:
            if current_channel == self.side_points:
                self.move_xy.move_absolute(-self.side_size/2,0)
            self.delta_x = self.distance_step
        else:
            self.delta_y = self.distance_step

        self.move_xy.move_relative(self.delta_x, self.delta_y)

        time.sleep(0.5)

        print 'move to postion: ',int(current_channel/self.side_points), ' , ' ,current_channel%self.side_points

    def set_generator(self, current_channel):

        if self.fast_sweep:
            self.set_generator_fast_sweep(current_channel)
            return

        change_detector = current_channel%self.side_points
        direcction = int(current_channel/self.side_points)

        if current_channel == 0:
            self.delta_x = 0
            self.delta_y = 0
        else:

            if change_detector == 0:
                if direcction%2 == 0:
                    self.prev_x_delta = self.distance_step
                if direcction%2 ==1:
                    self.prev_x_delta = -self.distance_step
                self.delta_y = self.distance_step
                self.delta_x = 0
            else:
                self.delta_y = 0
                self.delta_x = self.prev_x_delta

        self.move_xy.move_relative(self.delta_x, self.delta_y)
        time.sleep(0.5)

        print 'move to postion: ',int(current_channel/self.side_points), ' , ' ,current_channel%self.side_points

    def close_process(self):
        self.move_xy.move_absolute(0.0,0.0)
        self.move_xy.close_connection()