def add_onu(self, serial_number_64, status):
serial_number = Onu.serial_number_to_string(serial_number_64)
self.log.info('add-onu', serial_number=serial_number,
serial_number_64=serial_number_64, status=status)
onu_info = self._get_onu_info(serial_number)
if onu_info is None:
from alarms.onu_discovery_alarm import OnuDiscoveryAlarm
self.log.info('onu-lookup-failure', serial_number=serial_number_64)
OnuDiscoveryAlarm(self.olt, self.pon_id, serial_number).raise_alarm()
return
if serial_number_64 not in status.onus or onu_info['onu-id'] in self._active_los_alarms:
onu = None
onu_id = onu_info['onu-id']
if serial_number_64 in self._onus or onu_id in self._onu_by_id:
# May be here due to unmanaged power-cycle on OLT or fiber bounced for a
# previously activated ONU. Drop it and add bac on next discovery cycle
self.delete_onu(onu_id)
elif len(self._onus) >= self.MAX_ONUS_SUPPORTED:
self.log.warning('max-onus-provisioned', count=len(self._onus))
else:
# TODO: Make use of upstream_channel_speed variable
onu = Onu(onu_info)
self._onus[serial_number_64] = onu
self._onu_by_id[onu.onu_id] = onu
if onu is not None:
try:
tconts = onu_info['t-conts']
gem_ports = onu_info['gem-ports']
# Add Multicast to PON on a per-ONU basis until xPON multicast support is ready
# In xPON/BBF, mcast gems tie back to the channel-pair
# MCAST VLAN IDs stored as a negative value
for id_or_vid, gem_port in gem_ports.iteritems(): # TODO: Deprecate this when BBF ready
try:
if gem_port.multicast:
self.log.debug('id-or-vid', id_or_vid=id_or_vid)
vid = self.olt.multicast_vlans[0] if len(self.olt.multicast_vlans) else None
if vid is not None:
self.add_mcast_gem_port(gem_port, vid)
except Exception as e:
self.log.exception('id-or-vid', e=e)
yield onu.create(tconts, gem_ports)
# If autoactivate (demo) mode and not reflow, activate the ONU
if self.olt.autoactivate:
self.activate_onu(onu)
except Exception as e:
self.log.exception('add-onu', serial_number=serial_number_64, e=e)
del self._onus[serial_number_64]
del self._onu_by_id[onu.onu_id]
def add_onu(self, serial_number, status):
self.log.info('add-ONU', serial_number=serial_number)
if serial_number not in status.onus:
# Newly found and not enabled ONU, enable it now if not at max
if len(self._onus) >= self.MAX_ONUS_SUPPORTED:
self.log.warning('max-onus-provisioned')
else:
onu_info = self._get_onu_info(
Onu.serial_number_to_string(serial_number))
if onu_info is None:
self.log.info('lookup-failure',
serial_number=serial_number)
elif serial_number in self._onus or onu_info[
'onu-id'] in self._onu_by_id:
self.log.warning('onu-already-added',
serial_number=serial_number)
else:
# TODO: Make use of upstream_channel_speed variable
onu = Onu(onu_info)
self._onus[serial_number] = onu
self._onu_by_id[onu.onu_id] = onu
try:
tconts = onu_info['t-conts']
gem_ports = onu_info['gem-ports']
yield onu.create(tconts, gem_ports)
self.activate_onu(onu)
if len(self._pon_evc_map) > 0:
# Add gem-id's to maps
dl = []
for evc_map in self._pon_evc_map.itervalues():
dl = evc_map.add_onu(onu)
yield defer.gatherResults(dl)
except Exception as e:
del self._onus[serial_number]
del self._onu_by_id[onu.onu_id]
self.log.exception('add_onu',
serial_number=serial_number,
e=e)
def add_onu(self, serial_number, status):
self.log.info('add-onu', serial_number=serial_number, status=status)
if serial_number not in status.onus:
# Newly found and not enabled ONU, enable it now if not at max
if len(self._onus) >= self.MAX_ONUS_SUPPORTED:
self.log.warning('max-onus-provisioned')
else:
onu_info = self._get_onu_info(Onu.serial_number_to_string(serial_number))
if onu_info is None:
self.log.info('lookup-failure', serial_number=serial_number)
elif serial_number in self._onus or onu_info['onu-id'] in self._onu_by_id:
self.log.warning('onu-already-added', serial_number=serial_number)
else:
# TODO: Make use of upstream_channel_speed variable
onu = Onu(onu_info)
self._onus[serial_number] = onu
self._onu_by_id[onu.onu_id] = onu
try:
tconts = onu_info['t-conts']
gem_ports = onu_info['gem-ports']
# Add Multicast to PON on a per-ONU basis until xPON multicast support is ready
# In xPON/BBF, mcast gems tie back to the channel-pair
# MCAST VLAN IDs stored as a negative value
for id_or_vid, gem_port in gem_ports.iteritems(): # TODO: Deprecate this when BBF ready
if gem_port.multicast:
self.add_mcast_gem_port(gem_port, -id_or_vid)
yield onu.create(tconts, gem_ports)
self.activate_onu(onu)
except Exception as e:
del self._onus[serial_number]
del self._onu_by_id[onu.onu_id]
self.log.exception('add-onu', serial_number=serial_number, e=e)
def add_onu(self, serial_number, status):
self.log.info('add-ONU', serial_number=serial_number)
if serial_number not in status.onus:
# Newly found and not enabled ONU, enable it now if not at max
if len(self._onus) >= self.MAX_ONUS_SUPPORTED:
self.log.warning('max-onus-provisioned')
else:
onu_info = self._get_onu_info(
Onu.serial_number_to_string(serial_number))
if onu_info is None:
self.log.info('lookup-failure',
serial_number=serial_number)
elif serial_number in self._onus or onu_info[
'onu-id'] in self._onu_by_id:
self.log.warning('onu-already-added',
serial_number=serial_number)
else:
# TODO: Make use of upstream_channel_speed variable
onu = Onu(onu_info)
self._onus[serial_number] = onu
self._onu_by_id[onu.onu_id] = onu
try:
yield onu.create(onu_info)
self.activate_onu(onu)
except Exception as e:
del self._onus[serial_number]
del self._onu_by_id[onu.onu_id]
self.log.exception('add_onu',
serial_number=serial_number,
e=e)
def add_onu(self, serial_number, status):
self.log.info('add-onu', serial_number=serial_number, status=status)
onu_info = self._get_onu_info(Onu.serial_number_to_string(serial_number))
if onu_info is None:
self.log.info('lookup-failure', serial_number=serial_number)
if serial_number not in status.onus or onu_info['onu-id'] in self._active_los_alarms:
onu = None
if onu_info['onu-id'] in self._active_los_alarms:
try:
yield self._remove_from_hardware(onu_info['onu-id'])
except Exception as e:
self.log.exception('los-cleanup', e=e)
if serial_number in self._onus or onu_info['onu-id'] in self._onu_by_id:
# May be here due to unmanaged power-cycle on OLT
self.log.info('onu-already-added', serial_number=serial_number)
assert serial_number in self._onus and\
onu_info['onu-id'] in self._onu_by_id, \
'ONU not in both lists'
# Recover ONU information and attempt to reflow TCONT/GEM-PORT
# information as well
onu = self._onus[serial_number]
reflow = True
elif len(self._onus) >= self.MAX_ONUS_SUPPORTED:
self.log.warning('max-onus-provisioned', count=len(self._onus))
else:
# TODO: Make use of upstream_channel_speed variable
onu = Onu(onu_info)
reflow = False
self._onus[serial_number] = onu
self._onu_by_id[onu.onu_id] = onu
if onu is not None:
try:
tconts = onu_info['t-conts']
gem_ports = onu_info['gem-ports']
# Add Multicast to PON on a per-ONU basis until xPON multicast support is ready
# In xPON/BBF, mcast gems tie back to the channel-pair
# MCAST VLAN IDs stored as a negative value
for id_or_vid, gem_port in gem_ports.iteritems(): # TODO: Deprecate this when BBF ready
try:
if gem_port.multicast:
self.log.debug('id-or-vid', id_or_vid=id_or_vid)
self.add_mcast_gem_port(gem_port, -id_or_vid)
except Exception as e:
self.log.exception('id-or-vid', e=e)
yield onu.create(tconts, gem_ports, reflow=reflow)
# If autoactivate (demo) mode and not reflow, activate the ONU
if self.olt.autoactivate and not reflow:
self.activate_onu(onu)
except Exception as e:
self.log.exception('add-onu', serial_number=serial_number, reflow=reflow, e=e)
if not reflow:
del self._onus[serial_number]
del self._onu_by_id[onu.onu_id]
def add_onu(self, serial_number_64, status):
serial_number = Onu.serial_number_to_string(serial_number_64)
self.log.info('add-onu',
serial_number=serial_number,
serial_number_64=serial_number_64,
status=status)
onu_info = self._get_onu_info(serial_number)
if onu_info is None:
self.log.info('onu-lookup-failure',
serial_number=serial_number,
serial_number_64=serial_number_64)
OnuDiscoveryAlarm(self.olt.alarms, self.pon_id,
serial_number).raise_alarm()
returnValue('new-onu')
if serial_number_64 not in status.onus or onu_info[
'onu-id'] in self._active_los_alarms:
onu = None
onu_id = onu_info['onu-id']
if serial_number_64 in self._onus and onu_id in self._onu_by_id:
# Handles fast entry into this task before FPGA can set/clear results
returnValue('sticky-onu')
elif (serial_number_64 in self._onus and onu_id not in self._onu_by_id) or \
(serial_number_64 not in self._onus and onu_id in self._onu_by_id):
# May be here due to unmanaged power-cycle on OLT or fiber bounced for a
# previously activated ONU. Drop it and add back on next discovery cycle
self.delete_onu(onu_id)
elif len(self._onus) >= self.MAX_ONUS_SUPPORTED:
self.log.warning('max-onus-provisioned', count=len(self._onus))
returnValue('max-onus-reached')
else:
# TODO: Make use of upstream_channel_speed variable
onu = Onu(onu_info)
self._onus[serial_number_64] = onu
self._onu_by_id[onu.onu_id] = onu
if onu is not None:
try:
tconts = onu_info['t-conts']
gem_ports = onu_info['gem-ports']
# Add Multicast to PON on a per-ONU basis until xPON multicast support is ready
# In xPON/BBF, mcast gems tie back to the channel-pair
# MCAST VLAN IDs stored as a negative value
for id_or_vid, gem_port in gem_ports.iteritems(
): # TODO: Deprecate this when BBF ready
try:
if gem_port.multicast:
self.log.debug('id-or-vid',
id_or_vid=id_or_vid)
vid = self.olt.multicast_vlans[0] if len(
self.olt.multicast_vlans) else None
if vid is not None:
self.add_mcast_gem_port(gem_port, vid)
except Exception as e:
self.log.exception('id-or-vid', e=e)
yield onu.create(tconts, gem_ports)
except Exception as e:
self.log.exception('add-onu',
serial_number=serial_number_64,
e=e)
del self._onus[serial_number_64]
del self._onu_by_id[onu.onu_id]
def add_onu(self, serial_number_64, status):
"""
Add an ONU to the PON
:param serial_number_64: (str) base-64 encoded serial number
:param status: (dict) OLT PON status. Used to detect if ONU is already provisioned
"""
serial_number = Onu.serial_number_to_string(serial_number_64)
self.log.info('add-onu',
serial_number=serial_number,
serial_number_64=serial_number_64,
status=status)
# It takes a little while for a new ONU to be removed from the discovery
# list. Return early here so extra ONU IDs are not allocated
if serial_number_64 in self._onus:
returnValue('wait-for-fpga')
onu_info, activate_onu = self._get_onu_info(serial_number)
if activate_onu:
alarm = OnuDiscoveryAlarm(self.olt.alarms, self.pon_id,
serial_number)
reactor.callLater(0, alarm.raise_alarm)
if serial_number_64 not in status.onus: # or onu_info['onu-id'] not in self._active_los_alarms:
onu = None
onu_id = onu_info['onu-id']
# At our limit? TODO: Retrieve from device resource manager if available
if len(self._onus) >= self.MAX_ONUS_SUPPORTED:
self.log.warning('max-onus-provisioned', count=len(self._onus))
returnValue('max-onus-reached')
else:
# TODO: Make use of upstream_channel_speed variable
onu = Onu(onu_info)
self._onus[serial_number_64] = onu
self._onu_by_id[onu.onu_id] = onu
if onu is not None:
tconts = onu_info.pop('t-conts')
gem_ports = onu_info.pop('gem-ports')
if activate_onu:
_onu_device = self._parent.add_onu_device(
self.pon_id, # PON ID
onu.onu_id, # ONU ID
serial_number,
tconts,
gem_ports)
try:
# Add Multicast to PON on a per-ONU basis until xPON multicast support
# is ready
# In xPON/BBF, mcast gems tie back to the channel-pair
# MCAST VLAN IDs stored as a negative value
# for id_or_vid, gem_port in gem_ports.iteritems(): # TODO: Deprecate this when BBF ready
# try:
# if gem_port.multicast:
# self.log.debug('id-or-vid', id_or_vid=id_or_vid)
# vid = self.olt.multicast_vlans[0] if len(self.olt.multicast_vlans) else None
# if vid is not None:
# self.add_mcast_gem_port(gem_port, vid)
#
# except Exception as e:
# self.log.exception('id-or-vid', e=e)
# TODO: Need to clean up TCont and GEM-Port on ONU delete in non-xPON mode
_results = yield onu.create(tconts, gem_ports)
except Exception as e:
self.log.exception('add-onu',
serial_number=serial_number_64,
e=e)
def add_onu(self, serial_number_64, status):
"""
Add an ONU to the PON
TODO: This needs major refactoring after xPON is deprecated to be more maintainable
"""
serial_number = Onu.serial_number_to_string(serial_number_64)
self.log.info('add-onu',
serial_number=serial_number,
serial_number_64=serial_number_64,
status=status)
# It takes a little while for a new ONU to be removed from the discovery
# list. Return early here so extra ONU IDs are not allocated
if serial_number_64 in self._onus:
returnValue('wait-for-fpga')
onu_info, activate_onu = self._get_onu_info(serial_number)
if activate_onu:
alarm = OnuDiscoveryAlarm(self.olt.alarms, self.pon_id,
serial_number)
reactor.callLater(0, alarm.raise_alarm)
if serial_number_64 not in status.onus or onu_info[
'onu-id'] in self._active_los_alarms:
onu = None
onu_id = onu_info['onu-id']
if serial_number_64 in self._onus and onu_id in self._onu_by_id:
# Handles fast entry into this task before FPGA can set/clear results
returnValue('sticky-onu')
elif (serial_number_64 in self._onus and onu_id not in self._onu_by_id) or \
(serial_number_64 not in self._onus and onu_id in self._onu_by_id):
# May be here due to unmanaged power-cycle on OLT or fiber bounced for a
# previously activated ONU.
#
# TODO: Track when the ONU was discovered, and if > some maximum amount
# place the ONU (with serial number & ONU ID) on a wait list and
# use that to recover the ONU ID should it show up within a
# reasonable amount of time. Periodically groom the wait list and
# delete state ONUs so we can reclaim the ONU ID.
#
returnValue('waiting-for-fpga') # non-XPON mode will not
elif len(self._onus) >= self.MAX_ONUS_SUPPORTED:
self.log.warning('max-onus-provisioned', count=len(self._onus))
returnValue('max-onus-reached')
else:
# TODO: Make use of upstream_channel_speed variable
onu = Onu(onu_info)
self._onus[serial_number_64] = onu
self._onu_by_id[onu.onu_id] = onu
if onu is not None:
tconts = onu_info.pop('t-conts')
gem_ports = onu_info.pop('gem-ports')
if activate_onu:
_onu_device = self._parent.add_onu_device(
self._port_no, # PON ID
onu.onu_id, # ONU ID
serial_number,
tconts,
gem_ports)
try:
# Add Multicast to PON on a per-ONU basis until xPON multicast support
# is ready
# In xPON/BBF, mcast gems tie back to the channel-pair
# MCAST VLAN IDs stored as a negative value
# for id_or_vid, gem_port in gem_ports.iteritems(): # TODO: Deprecate this when BBF ready
# try:
# if gem_port.multicast:
# self.log.debug('id-or-vid', id_or_vid=id_or_vid)
# vid = self.olt.multicast_vlans[0] if len(self.olt.multicast_vlans) else None
# if vid is not None:
# self.add_mcast_gem_port(gem_port, vid)
#
# except Exception as e:
# self.log.exception('id-or-vid', e=e)
# TODO: Need to clean up TCont and GEM-Port on ONU delete in non-xPON mode
_results = yield onu.create(tconts, gem_ports)
except Exception as e:
self.log.exception('add-onu',
serial_number=serial_number_64,
e=e)
def add_onu(self, serial_number_64, status):
"""
Add an ONU to the PON
:param serial_number_64: (str) base-64 encoded serial number
:param status: (dict) OLT PON status. Used to detect if ONU is already provisioned
"""
serial_number = Onu.serial_number_to_string(serial_number_64)
self.log.info('add-onu', serial_number=serial_number,
serial_number_64=serial_number_64, status=status)
# It takes a little while for a new ONU to be removed from the discovery
# list. Return early here so extra ONU IDs are not allocated
if serial_number_64 in self._onus:
returnValue('wait-for-fpga')
if serial_number_64 in status.onus:
# Handles fast entry into this task before FPGA can clear results of ONU delete
returnValue('sticky-onu')
# At our limit? TODO: Retrieve from device resource manager if available
if len(self._onus) >= self.MAX_ONUS_SUPPORTED:
self.log.warning('max-onus-provisioned', count=len(self._onus))
returnValue('max-onus-reached')
onu_info = self._get_onu_info(serial_number)
onu_id = onu_info['onu-id']
if onu_id is None:
self.log.warning('no-onu-ids-available', serial_number=serial_number,
serial_number_64=serial_number_64)
returnValue('no-ids-available')
# TODO: Is the best before or after creation in parent device?
alarm = OnuDiscoveryAlarm(self.olt.alarms, self.pon_id, serial_number)
reactor.callLater(0, alarm.raise_alarm)
# Have the core create the ONU device
self._parent.add_onu_device(self.pon_id, onu_id, serial_number)
try:
onu = Onu(onu_info)
self._onus[serial_number_64] = onu
self._onu_by_id[onu.onu_id] = onu
# Add Multicast to PON on a per-ONU basis
#
# for id_or_vid, gem_port in gem_ports.iteritems():
# try:
# if gem_port.multicast:
# self.log.debug('id-or-vid', id_or_vid=id_or_vid)
# vid = self.olt.multicast_vlans[0] if len(self.olt.multicast_vlans) else None
# if vid is not None:
# self.add_mcast_gem_port(gem_port, vid)
#
# except Exception as e:
# self.log.exception('id-or-vid', e=e)
_results = yield onu.create()
except Exception as e:
self.log.warning('add-onu', serial_number=serial_number_64, e=e)