# this creates a neutron distribution with the shape of a tokamak plasma
my_plasma = Plasma(elongation=2.9,
minor_radius=1.118,
major_radius=1.9,
triangularity=0.55)
# there are other parameters that can be set for the plasma, but we can use the defaults for now
my_plasma.export_plasma_source('my_custom_plasma_source.so')
# sets the source poition, direction and energy with predefined plasma parameters (see source_sampling.cpp)
source.library = './my_custom_plasma_source.so'
sett.source = source
# Run OpenMC!
model = openmc.model.Model(geom, mats, sett)
statepoint_filename = model.run()
sp = openmc.StatePoint(statepoint_filename)
print('direction of first neutron =',
sp.source['u'][0]) # these neutrons are all created
fig_directions = go.Figure()
# plot the neutron birth locations and trajectory
fig_directions.add_trace({
'type': 'cone',
'cauto': False,
'x': sp.source['r']['x'],
'y': sp.source['r']['y'],
'z': sp.source['r']['z'],
'u': sp.source['u']['x'],
'v': sp.source['u']['y'],
import matplotlib.pyplot as plt
import numpy as np
import openmc
# Load the statepoint file
sp = openmc.StatePoint('statepoint.20.h5')
tally = sp.get_tally(scores=['flux'])
print(tally)
#tally.sum
#standard and mean deviation
print(tally)
(tally.mean, tally.std_dev)
flux = tally.get_slice(scores=['flux'])
thermal_flux = flux.get_slice(filters=[openmc.EnergyFilter],
filter_bins=[((0., 4.), )])
fission = tally.get_slice(scores=['fission'])
thermal_fission = fission.get_slice(filters=[openmc.EnergyFilter],
filter_bins=[((0., 4.), )])
nu_fission = tally.get_slice(scores=['nu-fission'])
thermal_flux.std_dev.shape = (100, 100)
thermal_flux.mean.shape = (100, 100)
thermal_fission.std_dev.shape = (100, 100)
# added a cell tally for tritium production
cell_filter = openmc.CellFilter(breeder_blanket_cell)
tbr_tally = openmc.Tally(name='TBR')
tbr_tally.filters = [cell_filter]
tbr_tally.scores = [
'(n,Xt)'
] # MT 205 is the (n,Xt) reaction where X is a wildcard, if MT 105 or (n,t) then some tritium production will be missed, for example (n,nt) which happens in Li7 would be missed
tallies.append(tbr_tally)
# Run OpenMC!
model = openmc.model.Model(geom, mats, sett, tallies)
model.run()
# open the results file
sp = openmc.StatePoint('statepoint.' + str(batches) + '.h5')
# access the tally using pandas dataframes
tbr_tally = sp.get_tally(name='TBR')
df = tbr_tally.get_pandas_dataframe()
tbr_tally_result = df['mean'].sum()
tbr_tally_std_dev = df['std. dev.'].sum()
# print results
print('The tritium breeding ratio was found, TBR = ', tbr_tally_result)
print('error on the tbr tally is ', tbr_tally_std_dev)
# output results to json file
json_output = {'TBR': tbr_tally_result, 'TBR_std_dev': tbr_tally_std_dev}
with open('simulation_results.json', 'w') as file_object:
def get_neutron_spectrum_from_plasma(plasma_temperature=14080000.0):
# MATERIALS (there are none in this model)
mats = openmc.Materials([])
# GEOMETRY
# surfaces
inner_surface = openmc.Sphere(r=100)
outer_surface = openmc.Sphere(r=101, boundary_type='vacuum')
# cells
inner_cell = openmc.Cell(region=-inner_surface)
# this is filled with a void / vauum by default
outer_cell = openmc.Cell(region=+inner_surface & -outer_surface)
# this is filled with a void / vauum by default
universe = openmc.Universe(cells=[inner_cell, outer_cell])
geom = openmc.Geometry(universe)
# SIMULATION SETTINGS
# Instantiate a Settings object
sett = openmc.Settings()
sett.batches = 20
sett.inactive = 0 # the default is 10, which would be wasted computing for us
sett.particles = 500000
sett.run_mode = 'fixed source'
# Create a DT point source
source = openmc.Source()
source.space = openmc.stats.Point((0, 0, 0))
source.angle = openmc.stats.Isotropic()
source.energy = openmc.stats.Muir(kt=plasma_temperature)
sett.source = source
# setup the filters for the tallies
neutron_particle_filter = openmc.ParticleFilter(['neutron'])
surface_filter = openmc.SurfaceFilter(
inner_surface) # detects particles across a surface
energy_filter = openmc.EnergyFilter(energy_bins)
spectra_tally = openmc.Tally(name='energy_spectra')
spectra_tally.scores = ['current']
spectra_tally.filters = [
surface_filter, neutron_particle_filter, energy_filter
]
tallies = openmc.Tallies()
tallies.append(spectra_tally)
# combine all the required parts to make a model
model = openmc.model.Model(geom, mats, sett, tallies)
# Run OpenMC!
results_filename = model.run()
# open the results file
results = openmc.StatePoint(results_filename)
#extracts the tally values from the simulation results
surface_tally = results.get_tally(name='energy_spectra')
surface_tally = surface_tally.get_pandas_dataframe()
surface_tally_values = surface_tally['mean']
return surface_tally_values
###############################################################################
import openmc
import sys
sys.path.insert(1, '../../scripts/')
from phase1a_constants import *
from openmc_analysis import *
###############################################################################
# Run
###############################################################################
case = 'p1a_2ah'
keff = 1.41823
keff_unc = 0.00003
sp = openmc.StatePoint('h5files/3pcm/fhr_p1a_c2ah_3pcm_statepoint.500.h5')
beta_b(sp, case)
# doppler
print(
reactivity_coefficient_b(keff_og=keff,
keff_og_unc=keff_unc,
keff_new=1.41474,
keff_new_unc=0.00003,
temp_change=+50))
# flibe
print(
reactivity_coefficient_b(keff_og=keff,
keff_og_unc=keff_unc,
keff_new=1.41804,
keff_new_unc=0.00003,
temp_change=+50))
def main():
parser = argparse.ArgumentParser()
parser.add_argument('-l',
'--benchmarks',
type=Path,
default=Path('benchmarks/lists/pst-short'),
help='List of benchmarks to run.')
parser.add_argument('-c',
'--code',
choices=['openmc', 'mcnp'],
default='openmc',
help='Code used to run benchmarks.')
parser.add_argument('-x',
'--cross-sections',
type=str,
default=os.getenv('OPENMC_CROSS_SECTIONS'),
help='OpenMC cross sections XML file.')
parser.add_argument('-s',
'--suffix',
type=str,
default='70c',
help='MCNP cross section suffix')
parser.add_argument('-p',
'--particles',
type=int,
default=10000,
help='Number of source particles.')
parser.add_argument('-b',
'--batches',
type=int,
default=150,
help='Number of batches.')
parser.add_argument('-i',
'--inactive',
type=int,
default=50,
help='Number of inactive batches.')
parser.add_argument('-m',
'--max-batches',
type=int,
default=10000,
help='Maximum number of batches.')
parser.add_argument(
'-t',
'--threshold',
type=float,
default=0.0001,
help='Value of the standard deviation trigger on eigenvalue.')
parser.add_argument(
'--mpi-args',
default="",
help="MPI execute command and any additional MPI arguments")
args = parser.parse_args()
# Create timestamp
timestamp = time.strftime("%Y-%m-%d-%H%M%S")
# Check that executable exists
executable = 'mcnp6' if args.code == 'mcnp' else 'openmc'
if not shutil.which(executable, os.X_OK):
msg = f'Unable to locate executable {executable} in path.'
raise IOError(msg)
mpi_args = args.mpi_args.split()
# Create directory and set filename for results
results_dir = Path('results')
results_dir.mkdir(exist_ok=True)
outfile = results_dir / f'{timestamp}.csv'
# Get a copy of the benchmarks repository
if not Path('benchmarks').is_dir():
repo = 'https://github.com/mit-crpg/benchmarks.git'
subprocess.run(['git', 'clone', repo], check=True)
# Get the list of benchmarks to run
if not args.benchmarks.is_file():
msg = f'Unable to locate benchmark list {args.benchmarks}.'
raise IOError(msg)
with open(args.benchmarks) as f:
benchmarks = [Path(line) for line in f.read().split()]
# Set cross sections
if args.cross_sections is not None:
os.environ["OPENMC_CROSS_SECTIONS"] = args.cross_sections
# Prepare and run benchmarks
for i, benchmark in enumerate(benchmarks):
print(f"{i + 1} {benchmark} ", end="", flush=True)
path = 'benchmarks' / benchmark
if args.code == 'openmc':
openmc.reset_auto_ids()
# Remove old statepoint files
for f in path.glob('statepoint.*.h5'):
os.remove(f)
# Modify settings
settings = openmc.Settings.from_xml(path / 'settings.xml')
settings.particles = args.particles
settings.inactive = args.inactive
settings.batches = args.batches
settings.keff_trigger = {
'type': 'std_dev',
'threshold': args.threshold
}
settings.trigger_active = True
settings.trigger_max_batches = args.max_batches
settings.output = {'tallies': False}
settings.export_to_xml(path)
# Re-generate materials if Python script is present
genmat_script = path / "generate_materials.py"
if genmat_script.is_file():
subprocess.run(["python", "generate_materials.py"], cwd=path)
# Run benchmark
proc = subprocess.run(
mpi_args + ["openmc"],
cwd=path,
stdout=subprocess.PIPE,
stderr=subprocess.STDOUT,
universal_newlines=True,
)
# Determine last statepoint
t_last = 0
last_statepoint = None
for sp in path.glob('statepoint.*.h5'):
mtime = sp.stat().st_mtime
if mtime >= t_last:
t_last = mtime
last_statepoint = sp
# Read k-effective mean and standard deviation from statepoint
if last_statepoint is not None:
with openmc.StatePoint(last_statepoint) as sp:
mean = sp.k_combined.nominal_value
stdev = sp.k_combined.std_dev
else:
# Read input file
with open(path / 'input', 'r') as f:
lines = f.readlines()
# Update criticality source card
line = f'kcode {args.particles} 1 {args.inactive} {args.batches}\n'
for i in range(len(lines)):
if lines[i].strip().startswith('kcode'):
lines[i] = line
break
# Update cross section suffix
match = '(7[0-4]c)|(8[0-6]c)'
if not re.match(match, args.suffix):
msg = f'Unsupported cross section suffix {args.suffix}.'
raise ValueError(msg)
lines = [re.sub(match, args.suffix, x) for x in lines]
# Write new input file
with open(path / 'input', 'w') as f:
f.write(''.join(lines))
# Remove old MCNP output files
for f in ('outp', 'runtpe', 'srctp'):
try:
os.remove(path / f)
except OSError:
pass
# Run benchmark and capture and print output
arg_list = mpi_args + [executable, 'inp=input']
proc = subprocess.run(arg_list,
cwd=path,
stdout=subprocess.PIPE,
stderr=subprocess.STDOUT,
universal_newlines=True)
# Read k-effective mean and standard deviation from output
with open(path / 'outp', 'r') as f:
line = f.readline()
while not line.strip().startswith('col/abs/trk len'):
line = f.readline()
words = line.split()
mean = float(words[2])
stdev = float(words[3])
# Write output to file
with open(path / f"output_{timestamp}", "w") as fh:
fh.write(proc.stdout)
if proc.returncode != 0:
mean = stdev = ""
print()
else:
# Display k-effective
print(f"{mean:.5f} ± {stdev:.5f}")
# Write results
words = str(benchmark).split('/')
name = words[1]
case = '/' + words[3] if len(words) > 3 else ''
line = f'{name}{case},{mean},{stdev}\n'
with open(outfile, 'a') as f:
f.write(line)
import matplotlib.pyplot as plt import os import openmc import numpy as np import helperfunction as hf import csv # ### Load Reference directory = "./data/FET/1000/" sp = openmc.StatePoint(directory + 'statepoint.1100.h5') porder = 50 name = 'fet' + str(porder) fet = sp.get_tally(name=name) df = fet.get_pandas_dataframe() # print(df[df['score'] == 'absorption']) fet_mean_coeff = df[df['score'] == 'absorption']['mean'] fet_std_coeff = df[df['score'] == 'absorption']['std. dev.'] fet_var_coeff = np.square(fet_std_coeff) fet_var_coeff_even = fet_var_coeff[::2] fet_mean_coeff_even = fet_mean_coeff[::2] # print(fet_mean_coeff) # print(fet_std_coeff) # print(fet_var_coeff) # normarray = np.arange(porder+1) normarrayeven = np.linspace(0, porder, num=(porder / 2) + 1) print(normarrayeven) k_n = (2 * normarrayeven + 1) / 2 up = np.multiply(fet_var_coeff_even, k_n) upnew = fet_var_coeff_even down = np.square(fet_mean_coeff_even) Rvalue = np.divide(up, down)
def _get_results(self, hash_output=False):
"""Digest info in the statepoint and return as a string."""
# Read the statepoint file.
statepoint = glob.glob(os.path.join(os.getcwd(), self._sp_name))[0]
sp = openmc.StatePoint(statepoint)
# Extract the cell tally
tallies = [sp.get_tally(name='cell tally')]
# Slice the tallies by cell filter bins
cell_filter_prod = itertools.product(tallies, self.cell_filters)
tallies = map(
lambda tf: tf[0].get_slice(filters=[type(tf[1])],
filter_bins=[tf[1].get_bin(0)]),
cell_filter_prod)
# Slice the tallies by energy filter bins
energy_filter_prod = itertools.product(tallies, self.energy_filters)
tallies = map(
lambda tf: tf[0].get_slice(filters=[type(tf[1])],
filter_bins=[(tf[1].get_bin(0), )]),
energy_filter_prod)
# Slice the tallies by nuclide
nuclide_prod = itertools.product(tallies, self.nuclides)
tallies = map(lambda tn: tn[0].get_slice(nuclides=[tn[1]]),
nuclide_prod)
# Slice the tallies by score
score_prod = itertools.product(tallies, self.scores)
tallies = map(lambda ts: ts[0].get_slice(scores=[ts[1]]), score_prod)
tallies = list(tallies)
# Initialize an output string
outstr = ''
# Append sliced Tally Pandas DataFrames to output string
for tally in tallies:
df = tally.get_pandas_dataframe()
outstr += df.to_string()
# Merge all tallies together
while len(tallies) != 1:
halfway = int(len(tallies) / 2)
zip_split = zip(tallies[:halfway], tallies[halfway:])
tallies = list(map(lambda xy: xy[0].merge(xy[1]), zip_split))
# Append merged Tally Pandas DataFrame to output string
df = tallies[0].get_pandas_dataframe()
outstr += df.to_string() + '\n'
# Extract the distribcell tally
distribcell_tally = sp.get_tally(name='distribcell tally')
# Sum up a few subdomains from the distribcell tally
sum1 = distribcell_tally.summation(
filter_type=openmc.DistribcellFilter,
filter_bins=[0, 100, 2000, 30000])
# Sum up a few subdomains from the distribcell tally
sum2 = distribcell_tally.summation(
filter_type=openmc.DistribcellFilter,
filter_bins=[500, 5000, 50000])
# Merge the distribcell tally slices
merge_tally = sum1.merge(sum2)
# Append merged Tally Pandas DataFrame to output string
df = merge_tally.get_pandas_dataframe()
outstr += df.to_string() + '\n'
# Extract the mesh tally
mesh_tally = sp.get_tally(name='mesh tally')
# Sum up a few subdomains from the mesh tally
sum1 = mesh_tally.summation(filter_type=openmc.MeshFilter,
filter_bins=[(1, 1, 1), (1, 2, 1)])
# Sum up a few subdomains from the mesh tally
sum2 = mesh_tally.summation(filter_type=openmc.MeshFilter,
filter_bins=[(2, 1, 1), (2, 2, 1)])
# Merge the mesh tally slices
merge_tally = sum1.merge(sum2)
# Append merged Tally Pandas DataFrame to output string
df = merge_tally.get_pandas_dataframe()
outstr += df.to_string() + '\n'
# Hash the results if necessary
if hash_output:
sha512 = hashlib.sha512()
sha512.update(outstr.encode('utf-8'))
outstr = sha512.hexdigest()
return outstr
def sphere_with_firstwall_model(
material_for_structure,
blanket_breeder_material,
blanket_coolant_material,
firstwall_coolant_material,
blanket_breeder_li6_enrichment, # this is a percentage
coolant_pressure, # this is in Pa
blanket_coolant_temperature_in_C,
firstwall_coolant_temperature_in_C,
blanket_breeder_fraction,
blanket_coolant_fraction,
blanket_structural_fraction,
blanket_breeder_temperature_in_C = None, #needed for liquid breeders like lithium lead
firstwall_thickness = 2.7, # this is in cm
blanket_thickness = 200, # this is in cm
inner_radius = 1000,
firstwall_armour_fraction = 0.106305, # equivilent to 3mm and based on https://doi.org/10.1016/j.fusengdes.2017.02.008
firstwall_coolant_fraction= 0.333507, # based on https://doi.org/10.1016/j.fusengdes.2017.02.008
firstwall_structural_fraction = 0.560188, # based on https://doi.org/10.1016/j.fusengdes.2017.02.008
blanket_multipler_material = None, #used for combined breeder multiplier options
blanket_multiplier_fraction = None, #used for combined breeder multiplier options
blanket_breeder_material_packing_fraction = None, #used for combined breeder multiplier options
blanket_multiplier_packing_fraction = None, #used for combined breeder multiplier options
blanket_multiplier_material = None #used for combined breeder multiplier options
):
breeder_percent_in_breeder_plus_multiplier_ratio = 100 * (blanket_breeder_fraction / (blanket_breeder_fraction + blanket_multiplier_fraction))
inputs = locals()
"""
This function builds materials for the homogenised blanket material, homogenised firstwall material
The creates a simple sphere geometry with a simple point source and TBR tally on the blanket
The function also carries out the simulation and writes the results to a JSON file
"""
# creates homogensied blanket material using a single breeder / multiplier material (e.g lithium lead)
if blanket_breeder_material == 'Pb842Li158':
blanket_material = MultiMaterial(material_tag = 'blanket_material',
materials = [
Material(material_name = material_for_structure),
Material(material_name = blanket_coolant_material,
temperature_in_C = blanket_coolant_temperature_in_C,
pressure_in_Pa = coolant_pressure),
Material(material_name = blanket_breeder_material,
enrichment = blanket_breeder_li6_enrichment,
temperature_in_C = blanket_breeder_temperature_in_C),
],
fracs = [blanket_structural_fraction,
blanket_coolant_fraction,
blanket_breeder_fraction],
percent_type='vo'
).openmc_material
# creates homogensied blanket material using a combined breeder multiplier material (e.g lithium ceramic with be multiplier)
else:
blanket_material = MultiMaterial(
material_tag = 'blanket_material',
materials = [
Material(material_name = material_for_structure),
Material(material_name = blanket_coolant_material,
temperature_in_C = blanket_coolant_temperature_in_C,
pressure_in_Pa = coolant_pressure),
Material(material_name = blanket_breeder_material,
enrichment = blanket_breeder_li6_enrichment,
packing_fraction = blanket_breeder_material_packing_fraction),
Material(material_name = blanket_multipler_material,
packing_fraction = blanket_multiplier_packing_fraction),
],
fracs = [blanket_structural_fraction,
blanket_coolant_fraction,
blanket_breeder_fraction,
blanket_multiplier_fraction],
percent_type='vo'
).openmc_material
# creates homogensied firstwall material with eurofer, tungsten and a coolant
firstwall_material = MultiMaterial(material_tag = 'firstwall_material',
materials = [
Material(material_name = 'tungsten'),
Material(material_name = firstwall_coolant_material,
temperature_in_C = firstwall_coolant_temperature_in_C,
pressure_in_Pa = coolant_pressure),
Material(material_name = 'eurofer')],
fracs = [firstwall_armour_fraction,
firstwall_coolant_fraction,
firstwall_structural_fraction]
).openmc_material
mats = openmc.Materials([blanket_material, firstwall_material])
# creates surfaces
breeder_blanket_inner_surface = openmc.Sphere(r=inner_radius+firstwall_thickness)
firstwall_outer_surface = openmc.Sphere(r=inner_radius)
inner_void_region = -firstwall_outer_surface
inner_void_cell = openmc.Cell(region=inner_void_region)
inner_void_cell.name = 'inner_void'
firstwall_region = +firstwall_outer_surface & -breeder_blanket_inner_surface
firstwall_cell = openmc.Cell(name='firstwall', region=firstwall_region)
firstwall_cell.fill = firstwall_material
breeder_blanket_outer_surface = openmc.Sphere(r=inner_radius+firstwall_thickness+blanket_thickness, boundary_type='vacuum')
breeder_blanket_region = -breeder_blanket_outer_surface & +breeder_blanket_inner_surface
breeder_blanket_cell = openmc.Cell(name = 'breeder_blanket', region=breeder_blanket_region)
breeder_blanket_cell.fill = blanket_material
universe = openmc.Universe(cells=[inner_void_cell,
firstwall_cell,
breeder_blanket_cell])
geom = openmc.Geometry(universe)
# assigns simulation settings
sett = openmc.Settings()
sett.batches = 200 # this is minimum number of batches that will be run
sett.trigger_active = True
sett.trigger_max_batches = 1500 # this is maximum number of batches that will be run
sett.particles = 300
sett.verbosity = 1
sett.run_mode = 'fixed source'
# sets a 14MeV (distributuion) point source
source = openmc.Source()
source.space = openmc.stats.Point((0,0,0))
source.angle = openmc.stats.Isotropic()
source.energy = openmc.stats.Muir(e0=14080000.0, m_rat=5.0, kt=20000.0) #neutron energy = 14.08MeV, AMU for D + T = 5, temperature is 20KeV
sett.source = source
# this is the tally set up
tallies = openmc.Tallies()
# define filters
cell_filter_breeder = openmc.CellFilter(breeder_blanket_cell)
particle_filter = openmc.ParticleFilter(['neutron'])
# creates the TBR tally using the filters and sets a completion trigger
tally = openmc.Tally(name='TBR')
tally.filters = [cell_filter_breeder, particle_filter]
tally.scores = ['(n,Xt)'] # where X is a wildcard, if MT 105 or (n,t) then some tritium production will be missed, for example (n,nt) which happens in Li7 would be missed
tally.triggers = [openmc.Trigger(trigger_type='rel_err', threshold=0.0001)] # This stops the simulation if the threshold is meet
tallies.append(tally)
# collects all the model parts and runs the model
model = openmc.model.Model(geom, mats, sett, tallies)
sp_filename = model.run(output=False)
# opens the output file and retrieves the tally results
sp = openmc.StatePoint(sp_filename)
tally = sp.get_tally(name='TBR')
df = tally.get_pandas_dataframe()
tally_result = df['mean'].sum()
tally_std_dev = df['std. dev.'].sum()
# combines the tally results with the input data
inputs.update({'tbr': tally_result})
inputs.update({'tbr_error': tally_std_dev})
return inputs
p.pixels = (200, 200)
p.color_by = 'material'
p.colors = {uo2: 'yellow', heavy_water: 'cyan'}
plots = openmc.Plots([p])
plots.export_to_xml()
openmc.plot_geometry(output=False)
pngstring = 'pinplot{}.png'.format(str(pitch))
subprocess.call(['convert', 'pinplot.ppm', pngstring])
#############################
### EXECUTION ###
#############################
openmc.run()
sp = openmc.StatePoint('statepoint.{}.h5'.format(settings.batches))
# Collect all the tallies
fiss_rate = sp.get_tally(name='fiss. rate')
fiss_rate_df = fiss_rate.get_pandas_dataframe()
abs_rate = sp.get_tally(name='abs. rate')
abs_rate_df = abs_rate.get_pandas_dataframe()
therm_abs_rate = sp.get_tally(name='therm. abs. rate')
therm_abs_rate_df = therm_abs_rate.get_pandas_dataframe()
fuel_therm_abs_rate = sp.get_tally(name='fuel therm. abs. rate')
fuel_therm_abs_rate_df = fuel_therm_abs_rate.get_pandas_dataframe()
therm_fiss_rate = sp.get_tally(name='therm. fiss. rate')
therm_fiss_rate_df = therm_fiss_rate.get_pandas_dataframe()
# Compute k-infinity
kinf = fiss_rate / abs_rate
kinf_df = kinf.get_pandas_dataframe()
def simulate_model(
enrichment,
thickness,
breeder_material_name="Li4SiO4",
temperature_in_C=500,
batches=10,
nps=1000,
inner_radius=500,
):
# MATERIALS from library of materials in neutronics_material_maker package
breeder_material = Material(
material_name=breeder_material_name,
enrichment=enrichment,
temperature_in_C=temperature_in_C,
).neutronics_material
eurofer = Material(material_name="eurofer").neutronics_material
copper = Material(material_name="copper").neutronics_material
mats = openmc.Materials([breeder_material, eurofer, copper])
mats.export_to_xml("materials.xml")
# GEOMETRY#
central_sol_surface = openmc.ZCylinder(r=100)
central_shield_outer_surface = openmc.ZCylinder(r=110)
first_wall_inner_surface = openmc.Sphere(r=inner_radius)
first_wall_outer_surface = openmc.Sphere(r=inner_radius + 10)
breeder_blanket_outer_surface = openmc.Sphere(r=inner_radius + 10.0 +
thickness)
vessel_outer_surface = openmc.Sphere(r=inner_radius + 10.0 + thickness +
10.0,
boundary_type="vacuum")
central_sol_region = -central_sol_surface & -breeder_blanket_outer_surface
central_sol_cell = openmc.Cell(region=central_sol_region)
central_sol_cell.fill = copper
central_shield_region = (+central_sol_surface
& -central_shield_outer_surface
& -breeder_blanket_outer_surface)
central_shield_cell = openmc.Cell(region=central_shield_region)
central_shield_cell.fill = eurofer
inner_void_region = -first_wall_inner_surface & +central_shield_outer_surface
inner_void_cell = openmc.Cell(region=inner_void_region)
inner_void_cell.name = "inner_void"
first_wall_region = (-first_wall_outer_surface
& +first_wall_inner_surface
& +central_shield_outer_surface)
first_wall_cell = openmc.Cell(region=first_wall_region)
first_wall_cell.fill = eurofer
breeder_blanket_region = (+first_wall_outer_surface
& -breeder_blanket_outer_surface
& +central_shield_outer_surface)
breeder_blanket_cell = openmc.Cell(region=breeder_blanket_region)
breeder_blanket_cell.fill = breeder_material
vessel_region = +breeder_blanket_outer_surface & -vessel_outer_surface
vessel_cell = openmc.Cell(region=vessel_region)
vessel_cell.name = "vessel"
vessel_cell.fill = eurofer
universe = openmc.Universe(cells=[
central_sol_cell,
central_shield_cell,
inner_void_cell,
first_wall_cell,
breeder_blanket_cell,
vessel_cell,
])
geom = openmc.Geometry(universe)
# SIMULATION SETTINGS#
sett = openmc.Settings()
sett.batches = batches
sett.inactive = 0
sett.particles = nps
sett.run_mode = "fixed source"
source = openmc.Source()
source.space = openmc.stats.Point((150, 0, 0))
source.angle = openmc.stats.Isotropic()
source.energy = openmc.stats.Discrete([14.08e6], [1])
sett.source = source
# sett.export_to_xml("settings.xml")
# tally filters
particle_filter = openmc.ParticleFilter("neutron")
cell_filter_breeder = openmc.CellFilter(breeder_blanket_cell)
# TALLIES#
tallies = openmc.Tallies()
tally = openmc.Tally(name="TBR")
tally.filters = [cell_filter_breeder, particle_filter]
tally.scores = ["(n,Xt)"]
tallies.append(tally)
# RUN OPENMC #
model = openmc.model.Model(geom, mats, sett, tallies)
model.run(output=False)
# RETRIEVING TALLY RESULTS
sp = openmc.StatePoint("statepoint." + str(batches) + ".h5")
json_output = {
"batches": batches,
"nps": nps,
"enrichment": enrichment,
"inner_radius": inner_radius,
"thickness": thickness,
"breeder_material_name": breeder_material_name,
"temperature_in_C": temperature_in_C,
}
tally = sp.get_tally(name="TBR")
df = tally.get_pandas_dataframe()
json_output["TBR"] = df["mean"].sum()
json_output["TBR_std_dev"] = df["std. dev."].sum()
return json_output
def open(self):
if self.is_open:
return
self._sp = openmc.StatePoint(self.filename)
self.is_open = True
import helperfunction as hf
import csv
import sys
N = []
for i in range(1, len(sys.argv)):
N.append(int(sys.argv[i]))
zerk_order = 100
evenmodes = int(zerk_order / 2 + 1)
orderarray = np.linspace(0, zerk_order, evenmodes)
pos, k_n = hf.get_position(zerk_order)
for n in N:
# ### Load Reference
directory = "./data/FET/" + str(n) + "/"
filename = "statepoint." + str(int(n + 100)) + ".h5"
sp = openmc.StatePoint(directory + filename)
name = 'fet' + str(zerk_order)
fettal = sp.get_tally(name=name)
fetabs = fettal.get_slice(scores=['absorption'])
fetabs_mean = fetabs.get_pandas_dataframe()['mean']
fetabs_std = fetabs.get_pandas_dataframe()['std. dev.']
fet_mean_coeff = hf.get_val_at_pos(pos, fetabs_mean)
fet_std_coeff = hf.get_val_at_pos(pos, fetabs_std)
fet_var_coeff = np.square(fet_std_coeff)
# normarrayeven = np.linspace(0,zerk_order,num = (zerk_order/2)+1)
# print(normarrayeven)
# k_n = (2*normarrayeven + 1)/2
def make_geometry_tallies(batches, nps, enrichment_fraction, inner_radius,
thickness, breeder_material_name, temperature_in_C):
#print('simulating ',batches,enrichment_fraction,inner_radius,thickness,breeder_material_name)
#MATERIALS#
breeder_material = make_breeder_materials(enrichment_fraction,
breeder_material_name,
temperature_in_C)
eurofer = make_eurofer()
copper = make_copper()
mats = openmc.Materials([breeder_material, eurofer, copper])
mats.export_to_xml('materials.xml')
#GEOMETRY#
central_sol_surface = openmc.ZCylinder(R=100)
central_shield_outer_surface = openmc.ZCylinder(R=110)
first_wall_inner_surface = openmc.Sphere(R=inner_radius)
first_wall_outer_surface = openmc.Sphere(R=inner_radius + 10)
breeder_blanket_outer_surface = openmc.Sphere(R=inner_radius + 10.0 +
thickness)
vessel_outer_surface = openmc.Sphere(R=inner_radius + 10.0 + thickness +
10.0,
boundary_type='vacuum')
central_sol_region = -central_sol_surface & -breeder_blanket_outer_surface
central_sol_cell = openmc.Cell(region=central_sol_region)
central_sol_cell.fill = copper
central_shield_region = +central_sol_surface & -central_shield_outer_surface & -breeder_blanket_outer_surface
central_shield_cell = openmc.Cell(region=central_shield_region)
central_shield_cell.fill = eurofer
inner_void_region = -first_wall_inner_surface & +central_shield_outer_surface
inner_void_cell = openmc.Cell(region=inner_void_region)
inner_void_cell.name = 'inner_void'
first_wall_region = -first_wall_outer_surface & +first_wall_inner_surface & +central_shield_outer_surface
first_wall_cell = openmc.Cell(region=first_wall_region)
first_wall_cell.fill = eurofer
breeder_blanket_region = +first_wall_outer_surface & -breeder_blanket_outer_surface & +central_shield_outer_surface
breeder_blanket_cell = openmc.Cell(region=breeder_blanket_region)
breeder_blanket_cell.fill = breeder_material
vessel_region = +breeder_blanket_outer_surface & -vessel_outer_surface
vessel_cell = openmc.Cell(region=vessel_region)
vessel_cell.name = 'vessel'
vessel_cell.fill = eurofer
universe = openmc.Universe(cells=[
central_sol_cell, central_shield_cell, inner_void_cell,
first_wall_cell, breeder_blanket_cell, vessel_cell
])
#plt.show(universe.plot(width=(1500,1500),basis='xz'))
geom = openmc.Geometry(universe)
# geom.export_to_xml('geometry.xml')
#SIMULATION SETTINGS#
sett = openmc.Settings()
sett.batches = batches
sett.inactive = 1
sett.particles = nps
sett.run_mode = 'fixed source'
source = openmc.Source()
source.space = openmc.stats.Point((150, 0, 0))
source.angle = openmc.stats.Isotropic()
#source.energy = openmc.stats.Discrete([14.08e6], [1])
source.energy = openmc.stats.Muir(
e0=14080000.0, m_rat=5.0, kt=20000.0
) #neutron energy = 14.08MeV, AMU for D + T = 5, temperature is 20KeV
sett.source = source
sett.export_to_xml('settings.xml')
#tally filters
particle_filter = openmc.ParticleFilter([1]) #1 is neutron, 2 is photon
cell_filter_breeder = openmc.CellFilter(breeder_blanket_cell)
cell_filter_vessel = openmc.CellFilter(vessel_cell)
surface_filter_front = openmc.SurfaceFilter(first_wall_inner_surface)
surface_filter_rear = openmc.SurfaceFilter(breeder_blanket_outer_surface)
energy_bins = openmc.mgxs.GROUP_STRUCTURES['VITAMIN-J-175']
energy_filter = openmc.EnergyFilter(energy_bins)
#TALLIES#
tallies = openmc.Tallies()
tally = openmc.Tally(name='TBR')
tally.filters = [cell_filter_breeder, particle_filter]
tally.scores = ['205']
tallies.append(tally)
tally = openmc.Tally(name='blanket_leakage')
tally.filters = [surface_filter_rear, particle_filter]
tally.scores = ['current']
tallies.append(tally)
tally = openmc.Tally(name='vessel_leakage')
tally.filters = [surface_filter_rear, particle_filter]
tally.scores = ['current']
tallies.append(tally)
tally = openmc.Tally(name='rear_neutron_spectra')
tally.filters = [surface_filter_rear, particle_filter, energy_filter]
tally.scores = ['flux']
tallies.append(tally)
tally = openmc.Tally(name='front_neutron_spectra')
tally.filters = [surface_filter_front, particle_filter, energy_filter]
tally.scores = ['flux']
tallies.append(tally)
tally = openmc.Tally(name='breeder_blanket_spectra')
tally.filters = [cell_filter_breeder, particle_filter, energy_filter]
tally.scores = ['flux']
tallies.append(tally)
tally = openmc.Tally(name='vacuum_vessel_spectra')
tally.filters = [cell_filter_vessel, particle_filter, energy_filter]
tally.scores = ['flux']
tallies.append(tally)
tally = openmc.Tally(name='DPA')
tally.filters = [cell_filter_vessel, particle_filter]
tally.scores = ['444']
tallies.append(tally)
#RUN OPENMC #
model = openmc.model.Model(geom, mats, sett, tallies)
model.run()
#RETRIEVING TALLY RESULTS
sp = openmc.StatePoint('statepoint.' + str(batches) + '.h5')
json_output = {
'enrichment_fraction': enrichment_fraction,
'inner_radius': inner_radius,
'thickness': thickness,
'breeder_material_name': breeder_material_name,
'temperature_in_C': temperature_in_C
}
tallies_to_retrieve = ['TBR', 'DPA', 'blanket_leakage', 'vessel_leakage']
for tally_name in tallies_to_retrieve:
tally = sp.get_tally(name=tally_name)
tally_result = tally.sum[0][0][
0] / batches #for some reason the tally sum is a nested list
tally_std_dev = tally.std_dev[0][0][
0] / batches #for some reason the tally std_dev is a nested list
json_output[tally_name] = {
'value': tally_result,
'std_dev': tally_std_dev
}
spectra_tallies_to_retrieve = [
'front_neutron_spectra', 'breeder_blanket_spectra',
'vacuum_vessel_spectra', 'rear_neutron_spectra'
]
for spectra_name in spectra_tallies_to_retrieve:
spectra_tally = sp.get_tally(name=spectra_name)
spectra_tally_result = [entry[0][0] for entry in spectra_tally.mean]
spectra_tally_std_dev = [
entry[0][0] for entry in spectra_tally.std_dev
]
json_output[spectra_name] = {
'value': spectra_tally_result,
'std_dev': spectra_tally_std_dev,
'energy_groups': list(energy_bins)
}
return json_output
def make_materials_geometry_tallies(enrichment_fraction):
#MATERIALS#
breeder_material = openmc.Material(
1, "breeder_material") #Pb84.2Li15.8 with natural enrichment of Li6
breeder_material.add_element('Pb', 84.2, 'ao')
breeder_material.add_nuclide('Li6', enrichment_fraction * 15.8, 'ao')
breeder_material.add_nuclide('Li7', (1.0 - enrichment_fraction) * 15.8,
'ao')
breeder_material.set_density('atom/b-cm', 3.2720171e-2) # around 11 g/cm3
copper = openmc.Material(name='copper')
copper.set_density('g/cm3', 8.5)
copper.add_element('Cu', 1.0)
eurofer = openmc.Material(name='eurofer')
eurofer.set_density('g/cm3', 7.75)
eurofer.add_element('Fe', 89.067, percent_type='wo')
eurofer.add_element('C', 0.11, percent_type='wo')
eurofer.add_element('Mn', 0.4, percent_type='wo')
eurofer.add_element('Cr', 9.0, percent_type='wo')
eurofer.add_element('Ta', 0.12, percent_type='wo')
eurofer.add_element('W', 1.1, percent_type='wo')
eurofer.add_element('N', 0.003, percent_type='wo')
eurofer.add_element('V', 0.2, percent_type='wo')
mats = openmc.Materials([breeder_material, eurofer, copper])
#GEOMETRY#
central_sol_surface = openmc.ZCylinder(R=100)
central_shield_outer_surface = openmc.ZCylinder(R=110)
vessel_inner = openmc.Sphere(R=500)
first_wall_outer_surface = openmc.Sphere(R=510)
breeder_blanket_outer_surface = openmc.Sphere(R=610,
boundary_type='vacuum')
central_sol_region = -central_sol_surface & -vessel_inner
central_sol_cell = openmc.Cell(region=central_sol_region)
central_sol_cell.fill = copper
central_shield_region = +central_sol_surface & -central_shield_outer_surface & -vessel_inner
central_shield_cell = openmc.Cell(region=central_shield_region)
central_shield_cell.fill = eurofer
inner_vessel_region = -vessel_inner & +central_shield_outer_surface
inner_vessel_cell = openmc.Cell(region=inner_vessel_region)
first_wall_region = -first_wall_outer_surface & +vessel_inner
first_wall_cell = openmc.Cell(region=first_wall_region)
first_wall_cell.fill = eurofer
breeder_blanket_region = +first_wall_outer_surface & -breeder_blanket_outer_surface
breeder_blanket_cell = openmc.Cell(region=breeder_blanket_region)
breeder_blanket_cell.fill = breeder_material
breeder_blanket_cell.name = 'breeder_blanket'
universe = openmc.Universe(cells=[
central_sol_cell, central_shield_cell, inner_vessel_cell,
first_wall_cell, breeder_blanket_cell
])
geom = openmc.Geometry(universe)
#SIMULATION SETTINGS#
sett = openmc.Settings()
batches = 3
sett.batches = batches
sett.inactive = 50
sett.particles = 5000
sett.run_mode = 'fixed source'
source = openmc.Source()
source.space = openmc.stats.Point((350, 0, 0))
source.angle = openmc.stats.Isotropic()
source.energy = openmc.stats.Discrete([14e6], [1])
sett.source = source
#TALLIES#
tallies = openmc.Tallies()
cell_filter = openmc.CellFilter(breeder_blanket_cell)
tbr_tally = openmc.Tally(2, name='TBR')
tbr_tally.filters = [cell_filter]
tbr_tally.scores = ['205']
tallies.append(tbr_tally)
#RUN OPENMC #
model = openmc.model.Model(geom, mats, sett, tallies)
model.run()
sp = openmc.StatePoint('statepoint.' + str(batches) + '.h5')
tbr_tally = sp.get_tally(name='TBR')
tbr_tally_result = tbr_tally.sum[0][0][
0] / batches #for some reason the tally sum is a nested list
tbr_tally_std_dev = tbr_tally.std_dev[0][0][
0] / batches #for some reason the tally std_dev is a nested list
return {
'enrichment_fraction': enrichment_fraction,
'tbr_tally_result': tbr_tally_result,
'tbr_tally_std_dev': tbr_tally_std_dev
}
def _plot(self):
"""Extract and plot the results
"""
# Read the results from the OpenMC statepoint
with openmc.StatePoint(os.path.join('openmc',
'statepoint.1.h5')) as sp:
t = sp.get_tally(name='photon flux')
x_openmc = t.find_filter(openmc.EnergyFilter).bins[:, 1] * 1.e-6
y_openmc = t.mean[:, 0, 0]
# Read the results from the MCNP output file
with open(os.path.join('mcnp', 'outp'), 'r') as f:
text = f.read()
p = text.find('1tally')
p = text.find('energy', p) + 10
q = text.find('total', p)
t = np.fromiter(text[p:q].split(), float)
t.shape = (len(t) // 3, 3)
x_mcnp = t[1:, 0]
y_mcnp = t[1:, 1]
sd = t[1:, 2]
# Normalize the spectra
y_openmc /= np.diff(np.insert(x_openmc, 0, 1.e-3)) * sum(y_openmc)
y_mcnp /= np.diff(np.insert(x_mcnp, 0, 1.e-3)) * sum(y_mcnp)
# Compute the relative error
err = np.zeros_like(y_mcnp)
idx = np.where(y_mcnp > 0)
err[idx] = (y_openmc[idx] - y_mcnp[idx]) / y_mcnp[idx]
# Set up the figure
fig = plt.figure(1, facecolor='w', figsize=(8, 8))
ax1 = fig.add_subplot(111)
# Create a second y-axis that shares the same x-axis, keeping the first
# axis in front
ax2 = ax1.twinx()
ax1.set_zorder(ax2.get_zorder() + 1)
ax1.patch.set_visible(False)
# Plot the spectra
ax1.loglog(x_mcnp, y_mcnp, 'r', linewidth=1, label='MCNP')
ax1.loglog(x_openmc,
y_openmc,
'b',
linewidth=1,
label='OpenMC',
linestyle='--')
# Plot the relative error and uncertainties
ax2.semilogx(x_mcnp, err, color=(0.2, 0.8, 0.0), linewidth=1)
ax2.semilogx(x_mcnp, 2 * sd, color='k', linestyle='--', linewidth=1)
ax2.semilogx(x_mcnp, -2 * sd, color='k', linestyle='--', linewidth=1)
# Set grid and tick marks
ax1.tick_params(axis='both', which='both', direction='in', length=10)
ax1.grid(b=False, axis='both', which='both')
ax2.tick_params(axis='y', which='both', right=False)
ax2.grid(b=True, which='both', axis='both', alpha=0.5, linestyle='--')
# Set axes labels and limits
ax1.set_xlim([1.e-3, self.energy_mev])
ax1.set_xlabel('Energy (MeV)', size=12)
ax1.set_ylabel('Spectrum', size=12)
ax1.legend()
ax2.set_ylabel("Relative error", size=12)
title = self.material + ', ' + str(self.energy_mev) + ' MeV Source'
plt.title(title)
# Save plot
os.makedirs('plots', exist_ok=True)
name = self.material + '-' + str(self.energy_mev) + 'MeV.png'
plt.savefig(os.path.join('plots', name), bbox_inches='tight')
plt.close()
pu = openmc.Material()
pu.set_density('sum')
pu.add_nuclide('Pu239', 3.7047e-02)
pu.add_nuclide('Pu240', 1.7512e-03)
pu.add_nuclide('Pu241', 1.1674e-04)
pu.add_element('Ga', 1.3752e-03)
mats = openmc.Materials([pu])
mats.export_to_xml()
# Create a single cell filled with the Pu metal
sphere = openmc.Sphere(r=6.3849, boundary_type='vacuum')
cell = openmc.Cell(fill=pu, region=-sphere)
geom = openmc.Geometry([cell])
geom.export_to_xml()
# Finally, define some run settings
settings = openmc.Settings()
settings.batches = 200
settings.inactive = 10
settings.particles = 10000
settings.export_to_xml()
# Run the simulation
openmc.run()
# Get the resulting k-effective value
n = settings.batches
with openmc.StatePoint(f'statepoint.{n}.h5') as sp:
keff = sp.k_combined
print(f'Final k-effective = {keff}')
# Depletion simulation parameters
time_step = 1*24*60*60 # s
final_time = 5*24*60*60 # s
time_steps = np.full(final_time // time_step, time_step)
chain_file = './chain_simple.xml'
power = 174 # W/cm, for 2D simulations only (use W for 3D)
###############################################################################
# Load previous simulation results
###############################################################################
# Load geometry from statepoint
statepoint = 'statepoint.100.h5'
with openmc.StatePoint(statepoint) as sp:
geometry = sp.summary.geometry
# Load previous depletion results
previous_results = openmc.deplete.ResultsList("depletion_results.h5")
###############################################################################
# Transport calculation settings
###############################################################################
# Instantiate a Settings object, set all runtime parameters
settings_file = openmc.Settings()
settings_file.batches = batches
settings_file.inactive = inactive
settings_file.particles = particles
def pincellfunction(pitch, enrichment):
settings = openmc.Settings()
# Set high tolerance to allow use of lower temperature xs
settings.temperature['tolerance'] = 10000
settings.temperature['method'] = 'nearest'
settings.temperature['multipole'] = True
settings.cutoff = {'energy': 1e-8} #energy cutoff in eV
#############################
### MATERIALS ###
#############################
uo2 = openmc.Material(1, "uo2")
uo2.add_element('U', 1.0, enrichment=enrichment)
uo2.add_element('O', 2.0)
uo2.set_density('g/cm3', 10.97)
uo2.temperature = 900 #kelvin
water = openmc.Material(3, "h2o")
water.add_nuclide('H1', 2.0)
water.add_nuclide('O16', 1.0)
#Using P = 15.5 Mpa
water.set_density('g/cm3', 0.66)
water.add_s_alpha_beta('c_H_in_H2O')
water.temperature = 600 #kelvin
mats = openmc.Materials([uo2, water])
mats.export_to_xml()
#############################
### GEOMETRY ###
#############################
universe = openmc.Universe()
fuel_or = openmc.ZCylinder(R=0.5)
fuel_region = -fuel_or
fuel_cell = openmc.Cell(1, 'fuel')
fuel_cell.fill = uo2
fuel_cell.region = fuel_region
hexagon = openmc.get_hexagonal_prism(edge_length=1 / 3**(1 / 2) * pitch,
orientation='y',
boundary_type='reflective')
bottom = openmc.ZPlane(z0=-pitch / 2, boundary_type='reflective')
top = openmc.ZPlane(z0=pitch / 2, boundary_type='reflective')
water_region = hexagon & +fuel_or
moderator = openmc.Cell(2, 'moderator')
moderator.fill = water
moderator.region = water_region
root = openmc.Universe(cells=(fuel_cell, moderator))
geom = openmc.Geometry(root)
geom.export_to_xml()
#####################################
### SOURCE/BATCHES ###
#####################################
point = openmc.stats.Point((0, 0, 0))
src = openmc.Source(space=point)
settings.source = src
settings.batches = 100
settings.inactive = 10
settings.particles = 1000
settings.export_to_xml()
#############################
### TALLIES ###
#############################
# Instantiate an empty Tallies object
tallies_file = openmc.Tallies()
# K-Eigenvalue (infinity) tallies
fiss_rate = openmc.Tally(name='fiss. rate')
fiss_rate.scores = ['nu-fission']
tallies_file.append(fiss_rate)
abs_rate = openmc.Tally(name='abs. rate')
abs_rate.scores = ['absorption']
tallies_file.append(abs_rate)
# Resonance Escape Probability tallies
therm_abs_rate = openmc.Tally(name='therm. abs. rate')
therm_abs_rate.scores = ['absorption']
therm_abs_rate.filters = [openmc.EnergyFilter([0., 0.625])]
tallies_file.append(therm_abs_rate)
# Thermal Flux Utilization tallies
fuel_therm_abs_rate = openmc.Tally(name='fuel therm. abs. rate')
fuel_therm_abs_rate.scores = ['absorption']
fuel_therm_abs_rate.filters = [
openmc.EnergyFilter([0., 0.625]),
openmc.CellFilter([fuel_cell])
]
tallies_file.append(fuel_therm_abs_rate)
# Fast Fission Factor tallies
therm_fiss_rate = openmc.Tally(name='therm. fiss. rate')
therm_fiss_rate.scores = ['nu-fission']
therm_fiss_rate.filters = [openmc.EnergyFilter([0., 0.625])]
tallies_file.append(therm_fiss_rate)
tallies_file.export_to_xml()
#############################
### PLOTTING ###
#############################
p = openmc.Plot()
p.filename = 'pinplot'
p.width = (1.5 * pitch, 1.5 * pitch)
p.pixels = (200, 200)
p.color_by = 'material'
p.colors = {uo2: 'yellow', water: 'blue'}
plots = openmc.Plots([p])
plots.export_to_xml()
openmc.plot_geometry()
pngstring = 'pinplot{}.png'.format(str(pitch))
subprocess.call(['convert', 'pinplot.ppm', pngstring])
subprocess.call(['mv', pngstring, 'figures/' + pngstring])
#############################
### EXECUTION ###
#############################
openmc.run()
sp = openmc.StatePoint('statepoint.{}.h5'.format(settings.batches))
# Collect all the tallies
fiss_rate = sp.get_tally(name='fiss. rate')
fiss_rate_df = fiss_rate.get_pandas_dataframe()
abs_rate = sp.get_tally(name='abs. rate')
abs_rate_df = abs_rate.get_pandas_dataframe()
therm_abs_rate = sp.get_tally(name='therm. abs. rate')
therm_abs_rate_df = therm_abs_rate.get_pandas_dataframe()
fuel_therm_abs_rate = sp.get_tally(name='fuel therm. abs. rate')
fuel_therm_abs_rate_df = fuel_therm_abs_rate.get_pandas_dataframe()
therm_fiss_rate = sp.get_tally(name='therm. fiss. rate')
therm_fiss_rate_df = therm_fiss_rate.get_pandas_dataframe()
# Compute k-infinity
kinf = fiss_rate / abs_rate
kinf_df = kinf.get_pandas_dataframe()
# Compute resonance escape probability
res_esc = (therm_abs_rate) / (abs_rate)
res_esc_df = res_esc.get_pandas_dataframe()
# Compute fast fission factor
fast_fiss = fiss_rate / therm_fiss_rate
fast_fiss_df = fast_fiss.get_pandas_dataframe()
# Compute thermal flux utilization
therm_util = fuel_therm_abs_rate / therm_abs_rate
therm_util_df = therm_util.get_pandas_dataframe()
# Compute neutrons produced per absorption
eta = therm_fiss_rate / fuel_therm_abs_rate
eta_df = eta.get_pandas_dataframe()
columns = [
'pitch', 'enrichment', 'kinf mean', 'kinf sd', 'res_esc mean',
'res_esc sd', 'fast_fiss mean', 'fast_fiss sd', 'therm_util mean',
'therm_util sd', 'eta mean', 'eta sd'
]
data = [[
pitch, enrichment, kinf_df['mean'][0], kinf_df['std. dev.'][0],
res_esc_df['mean'][0], res_esc_df['std. dev.'][0],
fast_fiss_df['mean'][0], fast_fiss_df['std. dev.'][0],
therm_util_df['mean'][0], therm_util_df['std. dev.'][0],
eta_df['mean'][0], eta_df['std. dev.'][0]
]]
all_tallies = pd.DataFrame(data, columns=columns)
return all_tallies
# Get heating in a neutron-only calculation
tally = openmc.Tally(name='heating')
tally.filters = [
openmc.MaterialFilter([fuel_31, helium, zirc4, ss304, agincd, water_600]),
openmc.ParticleFilter(['neutron', 'photon', 'electron', 'positron'])
]
tally.scores = ['fission', 'heating-local']
total_tally = openmc.Tally(name='total')
total_tally.scores = ['fission', 'heating-local', 'heating']
model.tallies = openmc.Tallies([tally, total_tally])
sp_path = model.run()
with openmc.StatePoint(sp_path) as sp:
t = sp.get_tally(name='heating')
df_neutron = t.get_pandas_dataframe()
# Get heating in a coupled neutron-photon calculation
model.settings.photon_transport = True
model.settings.delayed_photon_scaling = True
model.tallies[0].scores = ['fission', 'heating']
sp_path = model.run()
with openmc.StatePoint(sp_path) as sp:
t = sp.get_tally(name='heating')
df_neutron_photon = t.get_pandas_dataframe()
def mev_per_fission(df, score):
heating = df[df.score == score]
def shield(rad, major, coil, bool, outer, m_batches, m_error, neutrons):
#MATERIALS#
min = coil
max = outer+coil
major_rad = major + outer
R1 = rad[0]
R2 = rad[1]
mats = openmc.Materials()
tungsten = openmc.Material(name='Tungsten carbide')
tungsten.set_density('g/cm3', 15.63)
tungsten.add_element('W', 1.0)
tungsten.add_element('C', 1.0)
mats.append(tungsten)
water = openmc.Material(name='Water')
water.set_density('g/cm3', 1.0)
water.add_element('H', 2.0)
water.add_element('O', 1.0)
mats.append(water)
copper = openmc.Material(name='Copper')
copper.set_density('g/cm3', 8.5)
copper.add_element('Cu', 1.0)
mats.append(copper)
eurofer = openmc.Material(name='EUROFER97')
eurofer.set_density('g/cm3', 7.75)
eurofer.add_element('Fe', 89.067, percent_type='wo')
eurofer.add_element('C', 0.11, percent_type='wo')
eurofer.add_element('Mn', 0.4, percent_type='wo')
eurofer.add_element('Cr', 9.0, percent_type='wo')
eurofer.add_element('Ta', 0.12, percent_type='wo')
eurofer.add_element('W', 1.1, percent_type='wo')
eurofer.add_element('N', 0.003, percent_type='wo')
eurofer.add_element('V', 0.2, percent_type='wo')
mats.append(eurofer)
#GEOMETRY#
cylinder = openmc.ZCylinder(R=min)
shield1 = openmc.ZCylinder(R=R1)
shield2 = openmc.ZCylinder(R=R2)
shield3 = openmc.ZCylinder(R=max)
top = major_rad-(max-min)
shield_sph1 = openmc.Sphere(R=top)
shield_sph2 = openmc.Sphere(R=major_rad-(max-min)+(max-R2))
shield_sph3 = openmc.Sphere(R=major_rad-(max-min)+(max-R2)+(R2-R1))
pit = sqrt(top**2+top**2)
max_shield = sqrt(top**2+pit**2)+1
vessel_in = openmc.Sphere(R=major_rad)
vessel_out = openmc.Sphere(R=max_shield, boundary_type='vacuum')
magnet = -cylinder & -vessel_in
mat1 = -shield1 & +cylinder & -shield_sph3 #work on this
mat2 = -shield2 & +shield1 & -shield_sph2 #work on this
mat3 = -shield3 & +shield2 & -shield_sph1 #work on this
plasma = +shield3 & -shield_sph1
a = +shield_sph1 & -shield_sph2 & +shield2 #work on this
b = +shield_sph2 & -shield_sph3 & +shield1 #work on this
c = +shield_sph3 & -vessel_in & +cylinder #work on this
vessel = +vessel_in & -vessel_out
plasma_cell = openmc.Cell(region=plasma) #1
cop_mag = openmc.Cell(region=magnet) #2
cop_mag.fill = copper
tung1 = openmc.Cell(region=mat1) #3
tung1.fill = tungsten
wat = openmc.Cell(region=mat2) #4
wat.fill = water
tung2 = openmc.Cell(region=mat3) #5
tung2.fill = tungsten
ste_ves = openmc.Cell(region=vessel) #6
ste_ves.fill = eurofer
tung_sph1 = openmc.Cell(region=a) #7
tung_sph1.fill = tungsten
wat_sph = openmc.Cell(region=b) #8
wat_sph.fill = water
tung_sph2 = openmc.Cell(region=c) #9
tung_sph2.fill = tungsten
root = openmc.Universe(cells=(plasma_cell, cop_mag, tung1, wat, tung2, ste_ves, tung_sph1, wat_sph, tung_sph2))
geom = openmc.Geometry(root)
root.plot(width=(600.0, 600.0), basis='xz')
#SETTINGS#
batch = 2
max_batches = m_batches
inactive = 0
particles = neutrons
source = openmc.Source()
source.space = openmc.stats.Box((-top,-top,-top),(top,top,top))
source.angle = openmc.stats.Isotropic()
source.energy = openmc.stats.Discrete([14e6], [1])
sett = openmc.Settings()
sett.batches = batch
sett.trigger_active = True
sett.trigger_max_batches = m_batches
sett.inactive = inactive
sett.particles = particles
sett.output = {'tallies': True}
sett.run_mode = 'fixed source'
sett.source = source
#PLOT#
plots = openmc.Plots()
plot = openmc.Plot()
#plot.type = 'voxel'
plot.basis = 'xz'
plot.origin = (0, 0, 0)
plot.width = (600, 600)
plot.pixels = (1000, 1000)
plot.color_by = 'material'
plot.colors = {tungsten: 'black', water: 'blue', eurofer: 'grey', copper: 'brown'}
plots.append(plot)
plots.export_to_xml()
#TALLIES#
tallies = openmc.Tallies()
filter = openmc.CellFilter(cop_mag)
tally = openmc.Tally(name='total')
tally.scores = ['total']
tally.filters = [filter]
trigger = openmc.Trigger('rel_err', m_error/100)
tally.triggers = [trigger]
tallies.append(tally)
model = openmc.model.Model(geom, mats, sett, tallies)
#RUN#
model.run(output=bool)
for i in reversed(range(batch,max_batches+1)):
filename = 'statepoint.' +str(i).zfill(len(str(max_batches)))+ '.h5'
if os.path.isfile(filename):
sp = openmc.StatePoint(filename)
break
#print('file:',filename)
leakage = sp.get_tally(name='total')
leakage_mean = leakage.mean[0][0][0]
leakage_error = leakage.std_dev[0][0][0]
#print(leakage_mean)
#print(leakage_error)
dir = '/home/emiralle/shield_git'
for zippath in glob.iglob(os.path.join(dir, '*.h5')):
os.remove(zippath)
return leakage_mean, leakage_error
TallyId = int(TallyId)
if simname == None:
simname = os.path.basename(input_dir)
if Nsamps == None:
Nsamps = np.sum([filename.startswith("statepoint.") for filename in os.listdir(input_dir)])
else:
Nsamps = int(Nsamps)
if Nsamps == 0: raise Exception("No samples found")
#===============================
# Get energy of first simulation
sp1 = openmc.StatePoint(f'{input_dir}/statepoint.1.h5')
Tal = sp1.get_tally(id = TallyId).get_pandas_dataframe()
enHi = Tal['energy high [eV]']
enLo = Tal['energy low [eV]']
def get_samples(indecies, TallyId, statePointDir):
index = indecies[0]
try:
sp1 = openmc.StatePoint(f'{statePointDir}/statepoint.{index}.h5')
except:
sp1 = openmc.StatePoint(f'{statePointDir}/statepoint.{index-1}.h5')
Tal = sp1.get_tally(id = TallyId).get_pandas_dataframe()
energy_bins = openmc.mgxs.GROUP_STRUCTURES['CCFE-709']
energy_filter = openmc.EnergyFilter(energy_bins)
spectra_tally = openmc.Tally(name='energy_spectra')
spectra_tally.scores = ['flux']
spectra_tally.filters = [cell_filter, photon_particle_filter, energy_filter]
tallies = openmc.Tallies()
tallies.append(spectra_tally)
# combine all the required parts to make a model
model = openmc.model.Model(geom, mats, sett, tallies)
# Run OpenMC!
results_filename = model.run()
# open the results file
results = openmc.StatePoint(results_filename)
#extracts the tally values from the simulation results
cell_tally = results.get_tally(name='energy_spectra')
cell_tally = cell_tally.get_pandas_dataframe()
cell_tally_values = cell_tally['mean']
cell_tally_std_dev = cell_tally['std. dev.']
# this section plots the results
fig = go.Figure()
# adds a line for the
fig.add_trace(
go.Scatter(x=energy_bins,
y=cell_tally_values + cell_tally_std_dev,
line=dict(shape='hv', width=0)))
def get_neutronics_results_from_statepoint_file(
statepoint_filename: str,
fusion_power: float = None):
"""Reads the statepoint file from the neutronics simulation
and extracts the tally results.
Arguments:
statepoint_filename (str): The name of the statepoint file
fusion_power (float): The fusion power of the reactor, which is used to
scale some tallies. Defaults to None
Returns:
dict: a dictionary of the simulation results
"""
try:
import openmc
except ImportError as err:
raise err(
'openmc not found, get_neutronics_results_from_statepoint_file \
method is not available')
# open the results file
statepoint = openmc.StatePoint(statepoint_filename)
results = defaultdict(dict)
# access the tallies
for tally in statepoint.tallies.values():
if tally.name.endswith('TBR'):
data_frame = tally.get_pandas_dataframe()
tally_result = data_frame["mean"].sum()
tally_std_dev = data_frame['std. dev.'].sum()
results[tally.name] = {
'result': tally_result,
'std. dev.': tally_std_dev,
}
elif tally.name.endswith('heating'):
data_frame = tally.get_pandas_dataframe()
tally_result = data_frame["mean"].sum()
tally_std_dev = data_frame['std. dev.'].sum()
results[tally.name]['MeV per source particle'] = {
'result': tally_result / 1e6,
'std. dev.': tally_std_dev / 1e6,
}
if fusion_power is not None:
results[tally.name]['Watts'] = {
'result': tally_result * 1.602176487e-19 * (fusion_power / ((17.58 * 1e6) / 6.2415090744e18)),
'std. dev.': tally_std_dev * 1.602176487e-19 * (fusion_power / ((17.58 * 1e6) / 6.2415090744e18)),
}
elif tally.name.endswith('flux'):
data_frame = tally.get_pandas_dataframe()
tally_result = data_frame["mean"].sum()
tally_std_dev = data_frame['std. dev.'].sum()
results[tally.name]['Flux per source particle'] = {
'result': tally_result,
'std. dev.': tally_std_dev,
}
elif tally.name.endswith('spectra'):
data_frame = tally.get_pandas_dataframe()
tally_result = data_frame["mean"]
tally_std_dev = data_frame['std. dev.']
results[tally.name]['Flux per source particle'] = {
'energy': openmc.mgxs.GROUP_STRUCTURES['CCFE-709'].tolist(),
'result': tally_result.tolist(),
'std. dev.': tally_std_dev.tolist(),
}
elif '_on_2D_mesh' in tally.name:
score = tally.name.split('_')[0]
_save_2d_mesh_tally_as_png(
score=score,
tally=tally,
filename=tally.name.replace(
'(',
'').replace(
')',
'').replace(
',',
'-'))
elif '_on_3D_mesh' in tally.name:
mesh_id = 1
mesh = statepoint.meshes[mesh_id]
xs = np.linspace(
mesh.lower_left[0],
mesh.upper_right[0],
mesh.dimension[0] + 1
)
ys = np.linspace(
mesh.lower_left[1],
mesh.upper_right[1],
mesh.dimension[1] + 1
)
zs = np.linspace(
mesh.lower_left[2],
mesh.upper_right[2],
mesh.dimension[2] + 1
)
tally = statepoint.get_tally(name=tally.name)
data = tally.mean[:, 0, 0]
error = tally.std_dev[:, 0, 0]
data = data.tolist()
error = error.tolist()
for content in [data, error]:
for counter, i in enumerate(content):
if math.isnan(i):
content[counter] = 0.
write_3d_mesh_tally_to_vtk(
xs=xs,
ys=ys,
zs=zs,
tally_label=tally.name,
tally_data=data,
error_data=error,
outfile=tally.name.replace(
'(',
'').replace(
')',
'').replace(
',',
'-') +
'.vtk')
else:
# this must be a standard score cell tally
data_frame = tally.get_pandas_dataframe()
tally_result = data_frame["mean"].sum()
tally_std_dev = data_frame['std. dev.'].sum()
results[tally.name]['events per source particle'] = {
'result': tally_result,
'std. dev.': tally_std_dev,
}
return results
def make_geometry_tallies(batches, nps, inner_radius, thickness):
first_wall_inner_surface = openmc.Sphere(r=inner_radius)
first_wall_outer_surface = openmc.Sphere(r=inner_radius + thickness,
boundary_type='vacuum')
first_wall = +first_wall_inner_surface & -first_wall_outer_surface
first_wall = openmc.Cell(region=first_wall)
first_wall.fill = eurofer
inner_vac_cell = -first_wall_inner_surface
inner_vac_cell = openmc.Cell(region=inner_vac_cell)
universe = openmc.Universe(cells=[first_wall, inner_vac_cell])
geom = openmc.Geometry(universe)
geom.export_to_xml('geometry')
vox_plot = openmc.Plot()
vox_plot.type = 'voxel'
vox_plot.width = (10, 10, 10)
vox_plot.pixels = (200, 200, 200)
vox_plot.filename = 'plot_3d'
vox_plot.color_by = 'material'
vox_plot.colors = {eurofer: 'blue'}
plots = openmc.Plots([vox_plot])
plots.export_to_xml()
openmc.plot_geometry()
os.system('openmc-voxel-to-vtk plot_3d.h5 -o plot_3d.vti')
os.system('paraview plot_3d.vti')
sett = openmc.Settings()
sett.batches = batches
sett.inactive = 0
sett.particles = nps
sett.run_mode = 'fixed source'
source = openmc.Source()
source.space = openmc.stats.Point((0, 0, 0))
source.angle = openmc.stats.Isotropic()
source.energy = openmc.stats.Discrete([14.08e6], [1])
#source.energy = openmc.stats.Muir(e0=14080000.0, m_rat=5.0, kt=20000.0)
sett.source = source
sett.export_to_xml('settings.xml')
#tallies
particle_filter = openmc.ParticleFilter([1])
surface_filter_front = openmc.SurfaceFilter(first_wall_inner_surface)
surface_filter_rear = openmc.SurfaceFilter(first_wall_outer_surface)
bins = openmc.mgxs.GROUP_STRUCTURES['VITAMIN-J-175']
#think will need to change this
energy_filter = openmc.EnergyFilter(bins)
tallies = openmc.Tallies()
tally = openmc.Tally(name='wall_leakage')
tally.filters = [surface_filter_rear, particle_filter]
tally.scores = ['current']
tallies.append(tally)
tally = openmc.Tally(name='incident_neutron_spectrum')
tally.filters = [surface_filter_rear, particle_filter, energy_filter]
tally.scores = ['flux']
tallies.append(tally)
tally = openmc.Tally(name='leakage_neutron_spectrum')
tally.filters = [surface_filter_front, particle_filter, energy_filter]
tally.scores = ['flux']
tallies.append(tally)
model = openmc.model.Model(geom, mats, sett, tallies)
model.run()
sp = openmc.StatePoint('statepoint.' + str(batches) + '.h5')
tallies_to_retrieve = ['wall_leakage']
#at the moment, we only have one tally to retrieve, but we will set it up in a list anyway so we know how to do it
for tally_name in tallies_to_retrieve:
tally = sp.get_tally(name=tally_name)
df = tally.get_pandas_dataframe()
#defining something that stands for dataframe, need to investigate this
#its basically something that we use to obtain the mean value and the std deviation value of the tally
tally_result = df['mean'].sum()
tally_std_dev = df['std. dev.'].sum()
#for now, we will just try to print these values
#get spectra
spectra_tallies_to_retrieve = [
'incident_neutron_spectrum', 'leakage_neutron_spectrum'
]
for spectra_name in spectra_tallies_to_retrieve:
spectra_tally = sp.get_tally(name=spectra_name)
spectra_tally_result = [entry[0][0] for entry in spectra_tally.mean]
spectra_tally_std_dev = [
entry[0][0] for entry in spectra_tally.std_dev
]
def test_activation(run_in_tmpdir, model, reaction_rate_mode,
reaction_rate_opts, tolerance):
# Determine (n.gamma) reaction rate using initial run
sp = model.run()
with openmc.StatePoint(sp) as sp:
tally = sp.tallies[1]
capture_rate = tally.mean.flat[0]
# Create one-nuclide depletion chain
chain = openmc.deplete.Chain()
w186 = openmc.deplete.Nuclide('W186')
w186.add_reaction('(n,gamma)', None, 0.0, 1.0)
chain.add_nuclide(w186)
chain.export_to_xml('test_chain.xml')
# Create transport operator
op = openmc.deplete.Operator(
model,
'test_chain.xml',
normalization_mode="source-rate",
reaction_rate_mode=reaction_rate_mode,
reaction_rate_opts=reaction_rate_opts,
)
# To determine the source rate necessary to reduce W186 density in half, we
# start with the single-nuclide transmutation equation:
#
# dn/dt = -f * sigma * phi * n
# n(t) = n0 * exp(-f * sigma * phi * t)
#
# where f is the source rate. The capture rate, r, is sigma * phi * n0,
# meaning that:
#
# n(t) = n0 * exp(-f * r * t / n0)
#
# To reduce the density by half, we would need:
#
# n(t)/n0 = exp(-f * r * t / n0) = 1/2
# f = n0 / (r * t) ln(2)
#
# So we need to know the initial number of atoms (n0), the capture rate (r),
# and choose an irradiation time (t)
w = model.geometry.get_materials_by_name('tungsten')[0]
atom_densities = w.get_nuclide_atom_densities()
atom_per_cc = 1e24 * atom_densities['W186'][1] # Density in atom/cm^3
n0 = atom_per_cc * w.volume # Absolute number of atoms
# Pick a random irradiation time and then determine necessary source rate to
# reduce material by half
t = uniform(1.0, 5.0) * 86400
source_rates = [n0 / (capture_rate * t) * log(2.0)]
# Now activate the material
integrator = openmc.deplete.PredictorIntegrator(op, [t],
source_rates=source_rates)
integrator.integrate()
# Get resulting number of atoms
results = openmc.deplete.ResultsList.from_hdf5('depletion_results.h5')
_, atoms = results.get_atoms(str(w.id), "W186")
assert atoms[0] == pytest.approx(n0)
assert atoms[1] / atoms[0] == pytest.approx(0.5, rel=tolerance)
def simulate_cylinder_cask_csg(self, material, source, height,
outer_radius, thickness, batches,
particles):
"""Makes a CSG cask geometry runs a simulation and returns the result"""
mats = openmc.Materials([material])
outer_cylinder = openmc.ZCylinder(r=outer_radius)
inner_cylinder = openmc.ZCylinder(r=outer_radius - thickness)
inner_top = openmc.ZPlane(z0=height * 0.5)
inner_bottom = openmc.ZPlane(z0=-height * 0.5)
outer_top = openmc.ZPlane(z0=(height * 0.5) + thickness)
outer_bottom = openmc.ZPlane(z0=(-height * 0.5) - thickness)
sphere_1 = openmc.Sphere(r=100, boundary_type='vacuum')
cylinder_region = -outer_cylinder & +inner_cylinder & -inner_top & +inner_bottom
cylinder_cell = openmc.Cell(region=cylinder_region)
cylinder_cell.fill = material
top_cap_region = -outer_top & +inner_top & -outer_cylinder
top_cap_cell = openmc.Cell(region=top_cap_region)
top_cap_cell.fill = material
bottom_cap_region = +outer_bottom & -inner_bottom & -outer_cylinder
bottom_cap_cell = openmc.Cell(region=bottom_cap_region)
bottom_cap_cell.fill = material
inner_void_region = -inner_cylinder & -inner_top & +inner_bottom
inner_void_cell = openmc.Cell(region=inner_void_region)
# sphere 1 region is below -sphere_1 and not (~) in the other regions
sphere_1_region = -sphere_1
sphere_1_cell = openmc.Cell(region=sphere_1_region
& ~bottom_cap_region
& ~top_cap_region
& ~cylinder_region
& ~inner_void_region)
universe = openmc.Universe(cells=[
inner_void_cell, cylinder_cell, top_cap_cell, bottom_cap_cell,
sphere_1_cell
])
geom = openmc.Geometry(universe)
# Instantiate a Settings object
sett = openmc.Settings()
sett.batches = batches
sett.particles = particles
sett.inactive = 0
sett.run_mode = 'fixed source'
sett.photon_transport = True
sett.source = source
cell_filter = openmc.CellFilter(
[cylinder_cell, top_cap_cell, bottom_cap_cell])
tally = openmc.Tally(name='csg_heating')
tally.filters = [cell_filter]
tally.scores = ['heating']
tallies = openmc.Tallies()
tallies.append(tally)
model = openmc.model.Model(geom, mats, sett, tallies)
sp_filename = model.run()
# open the results file
results = openmc.StatePoint(sp_filename)
# access the tally using pandas dataframes
tally = results.get_tally(name='csg_heating')
tally_df = tally.get_pandas_dataframe()
return tally_df['mean'].sum()
def test_full(run_in_tmpdir, problem, multiproc):
"""Full system test suite.
Runs an entire OpenMC simulation with depletion coupling and verifies
that the outputs match a reference file. Sensitive to changes in
OpenMC.
This test runs a complete OpenMC simulation and tests the outputs.
It will take a while.
"""
geometry, lower_left, upper_right = problem
# OpenMC-specific settings
settings = openmc.Settings()
settings.particles = 100
settings.batches = 10
settings.inactive = 0
space = openmc.stats.Box(lower_left, upper_right)
settings.source = openmc.Source(space=space)
settings.seed = 1
settings.verbosity = 1
# Create operator
chain_file = Path(__file__).parents[2] / 'chain_simple.xml'
op = openmc.deplete.Operator(geometry, settings, chain_file)
op.round_number = True
# Power and timesteps
dt1 = 15. * 24 * 60 * 60 # 15 days
dt2 = 1.5 * 30 * 24 * 60 * 60 # 1.5 months
N = floor(dt2 / dt1)
dt = np.full(N, dt1)
power = 2.337e15 * 4 * JOULE_PER_EV * 1e6 # MeV/second cm from CASMO
# Perform simulation using the predictor algorithm
openmc.deplete.pool.USE_MULTIPROCESSING = multiproc
openmc.deplete.PredictorIntegrator(op, dt, power).integrate()
# Get path to test and reference results
path_test = op.output_dir / 'depletion_results.h5'
path_reference = Path(__file__).with_name('test_reference.h5')
# If updating results, do so and return
if config['update']:
shutil.copyfile(str(path_test), str(path_reference))
return
# Load the reference/test results
res_test = openmc.deplete.ResultsList.from_hdf5(path_test)
res_ref = openmc.deplete.ResultsList.from_hdf5(path_reference)
# Assert same mats
for mat in res_ref[0].mat_to_ind:
assert mat in res_test[0].mat_to_ind, \
"Material {} not in new results.".format(mat)
for nuc in res_ref[0].nuc_to_ind:
assert nuc in res_test[0].nuc_to_ind, \
"Nuclide {} not in new results.".format(nuc)
for mat in res_test[0].mat_to_ind:
assert mat in res_ref[0].mat_to_ind, \
"Material {} not in old results.".format(mat)
for nuc in res_test[0].nuc_to_ind:
assert nuc in res_ref[0].nuc_to_ind, \
"Nuclide {} not in old results.".format(nuc)
tol = 1.0e-6
for mat in res_test[0].mat_to_ind:
for nuc in res_test[0].nuc_to_ind:
_, y_test = res_test.get_atoms(mat, nuc)
_, y_old = res_ref.get_atoms(mat, nuc)
# Test each point
correct = True
for i, ref in enumerate(y_old):
if ref != y_test[i]:
if ref != 0.0:
correct = np.abs(y_test[i] - ref) / ref <= tol
else:
correct = False
assert correct, "Discrepancy in mat {} and nuc {}\n{}\n{}".format(
mat, nuc, y_old, y_test)
# Compare statepoint files with depletion results
t_test, k_test = res_test.get_eigenvalue()
t_ref, k_ref = res_ref.get_eigenvalue()
k_state = np.empty_like(k_ref)
n_tallies = np.empty(N + 1, dtype=int)
# Get statepoint files for all BOS points and EOL
for n in range(N + 1):
statepoint = openmc.StatePoint("openmc_simulation_n{}.h5".format(n))
k_n = statepoint.k_combined
k_state[n] = [k_n.nominal_value, k_n.std_dev]
n_tallies[n] = len(statepoint.tallies)
# Look for exact match pulling from statepoint and depletion_results
assert np.all(k_state == k_test)
assert np.allclose(k_test, k_ref)
# Check that no additional tallies are loaded from the files
assert np.all(n_tallies == 0)
# added a cell tally for tritium production
cell_filter = openmc.CellFilter(breeder_blanket_cell)
tbr_tally = openmc.Tally(name='TBR')
tbr_tally.filters = [cell_filter]
tbr_tally.scores = [
'(n,Xt)'
] # MT 205 is the (n,Xt) reaction where X is a wildcard, if MT 105 or (n,t) then some tritium production will be missed, for example (n,nt) which happens in Li7 would be missed
tallies.append(tbr_tally)
# Run OpenMC!
model = openmc.model.Model(geom, mats, sett, tallies)
sp_filename = model.run()
# open the results file
sp = openmc.StatePoint(sp_filename)
# access the tally using pandas dataframes
tbr_tally = sp.get_tally(name='TBR')
df = tbr_tally.get_pandas_dataframe()
tbr_tally_result = df['mean'].sum()
tbr_tally_std_dev = df['std. dev.'].sum()
# print results
print('The tritium breeding ratio was found, TBR = ', tbr_tally_result)
print('error on the tbr tally is ', tbr_tally_std_dev)
# output results to json file
json_output = {'TBR': tbr_tally_result, 'TBR_std_dev': tbr_tally_std_dev}
with open('simulation_results.json', 'w') as file_object:
simDir = Path.cwd()
Nfiles = 500
SIMNAME1 = "endfFe"
SIMNAME2 = "tendlFe"
statePointDirSandy = simDir / f"statepoints-{SIMNAME1}"
statePointDirTendl = simDir / f"statepoints-{SIMNAME2}"
##
# Plotting stuff
##
index = 1
sp1 = openmc.StatePoint(f'{statePointDirSandy}/statepoint.{index}.h5')
Tal = sp1.get_tally(id=TallyId).get_pandas_dataframe()
enHi = Tal['energy high [eV]']
enLo = Tal['energy low [eV]']
widths = (enHi - enLo)
leth = 1
surf = 1
if useLeth: leth = abs(np.log(widths) * (widths > 1))
if useSurf: surf = np.pi * 4 * r**2
means = np.array(Tal['mean'])
