# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
from openstack.common import cfg
from openstack.common import context as req_context
from openstack.common.gettextutils import _
from openstack.common import log as logging
from openstack.common import rpc
LOG = logging.getLogger(__name__)
notification_topic_opt = cfg.ListOpt(
'notification_topics',
default=[
'notifications',
],
help='AMQP topic used for openstack notifications')
CONF = cfg.CONF
CONF.register_opt(notification_topic_opt)
def notify(context, message):
"""Sends a notification via RPC"""
if not context:
context = req_context.get_admin_context()
priority = message.get('priority', CONF.default_notification_level)
priority = priority.lower()
for topic in CONF.notification_topics:
topic = '%s.%s' % (topic, priority)
# admin_password = badpassword
opts = [
cfg.StrOpt('auth_admin_prefix', default=''),
cfg.StrOpt('auth_host', default='127.0.0.1'),
cfg.IntOpt('auth_port', default=35357),
cfg.StrOpt('auth_protocol', default='https'),
cfg.StrOpt('auth_uri', default=None),
cfg.BoolOpt('delay_auth_decision', default=False),
cfg.StrOpt('admin_token'),
cfg.StrOpt('admin_user'),
cfg.StrOpt('admin_password'),
cfg.StrOpt('admin_tenant_name', default='admin'),
cfg.StrOpt('certfile'),
cfg.StrOpt('keyfile'),
cfg.StrOpt('signing_dir'),
cfg.ListOpt('memcache_servers'),
cfg.IntOpt('token_cache_time', default=300),
]
CONF.register_opts(opts, group='keystone_authtoken')
def will_expire_soon(expiry):
""" Determines if expiration is about to occur.
:param expiry: a datetime of the expected expiration
:returns: boolean : true if expiration is within 30 seconds
"""
soon = (timeutils.utcnow() + datetime.timedelta(seconds=30))
return expiry < soon
default=64,
help='Size of RPC thread pool'),
cfg.IntOpt('rpc_conn_pool_size',
default=30,
help='Size of RPC connection pool'),
cfg.IntOpt('rpc_response_timeout',
default=60,
help='Seconds to wait for a response from call or multicall'),
cfg.IntOpt('rpc_cast_timeout',
default=30,
help='Seconds to wait before a cast expires (TTL). '
'Only supported by impl_zmq.'),
cfg.ListOpt('allowed_rpc_exception_modules',
default=[
'openstack.common.exception',
'nova.exception',
'cinder.exception',
],
help='Modules of exceptions that are permitted to be recreated'
'upon receiving exception data from an rpc call.'),
cfg.BoolOpt('fake_rabbit',
default=False,
help='If passed, use a fake RabbitMQ provider'),
#
# The following options are not registered here, but are expected to be
# present. The project using this library must register these options with
# the configuration so that project-specific defaults may be defined.
#
#cfg.StrOpt('control_exchange',
# default='nova',
# help='AMQP exchange to connect to if using RabbitMQ or Qpid'),
]
from openstack.common import log as logging
from openstack.common.rpc import amqp as rpc_amqp
from openstack.common.rpc import common as rpc_common
qpid_messaging = importutils.try_import("qpid.messaging")
qpid_exceptions = importutils.try_import("qpid.messaging.exceptions")
LOG = logging.getLogger(__name__)
qpid_opts = [
cfg.StrOpt('qpid_hostname',
default='localhost',
help='Qpid broker hostname'),
cfg.StrOpt('qpid_port', default='5672', help='Qpid broker port'),
cfg.ListOpt('qpid_hosts',
default=['$qpid_hostname:$qpid_port'],
help='Qpid HA cluster host:port pairs'),
cfg.StrOpt('qpid_username',
default='',
help='Username for qpid connection'),
cfg.StrOpt('qpid_password',
default='',
help='Password for qpid connection'),
cfg.StrOpt('qpid_sasl_mechanisms',
default='',
help='Space separated list of SASL mechanisms to use for auth'),
cfg.IntOpt('qpid_heartbeat',
default=60,
help='Seconds between connection keepalive heartbeats'),
cfg.StrOpt('qpid_protocol',
default='tcp',
help='SSL key file (valid only if SSL enabled)'),
cfg.StrOpt('kombu_ssl_certfile',
default='',
help='SSL cert file (valid only if SSL enabled)'),
cfg.StrOpt('kombu_ssl_ca_certs',
default='',
help=('SSL certification authority file '
'(valid only if SSL enabled)')),
cfg.StrOpt('rabbit_host',
default='localhost',
help='The RabbitMQ broker address where a single node is used'),
cfg.IntOpt('rabbit_port',
default=5672,
help='The RabbitMQ broker port where a single node is used'),
cfg.ListOpt('rabbit_hosts',
default=['$rabbit_host:$rabbit_port'],
help='RabbitMQ HA cluster host:port pairs'),
cfg.BoolOpt('rabbit_use_ssl',
default=False,
help='connect over SSL for RabbitMQ'),
cfg.StrOpt('rabbit_userid', default='guest', help='the RabbitMQ userid'),
cfg.StrOpt('rabbit_password',
default='guest',
help='the RabbitMQ password'),
cfg.StrOpt('rabbit_virtual_host',
default='/',
help='the RabbitMQ virtual host'),
cfg.IntOpt('rabbit_retry_interval',
default=1,
help='how frequently to retry connecting with RabbitMQ'),
cfg.IntOpt('rabbit_retry_backoff',
'%(user_id)s %(project_id)s] %(instance)s'
'%(message)s',
help='format string to use for log messages with context'),
cfg.StrOpt('logging_default_format_string',
default='%(asctime)s %(process)d %(levelname)s %(name)s [-]'
' %(instance)s%(message)s',
help='format string to use for log messages without context'),
cfg.StrOpt('logging_debug_format_suffix',
default='%(funcName)s %(pathname)s:%(lineno)d',
help='data to append to log format when level is DEBUG'),
cfg.StrOpt('logging_exception_prefix',
default='%(asctime)s %(process)d TRACE %(name)s %(instance)s',
help='prefix each line of exception output with this format'),
cfg.ListOpt('default_log_levels',
default=[
'amqplib=WARN', 'sqlalchemy=WARN', 'boto=WARN',
'suds=INFO', 'keystone=INFO', 'eventlet.wsgi.server=WARN'
],
help='list of logger=LEVEL pairs'),
cfg.BoolOpt('publish_errors', default=False, help='publish error events'),
# NOTE(mikal): there are two options here because sometimes we are handed
# a full instance (and could include more information), and other times we
# are just handed a UUID for the instance.
cfg.StrOpt('instance_format',
default='[instance: %(uuid)s] ',
help='If an instance is passed with the log message, format '
'it like this'),
cfg.StrOpt('instance_uuid_format',
default='[instance: %(uuid)s] ',
help='If an instance UUID is passed with the log message, '
'format it like this'),
import imp
import os
import os.path
import re
import shutil
import sys
try:
from openstack.common import cfg
except:
sys.stderr.write("Try running update.sh")
raise
opts = [
cfg.ListOpt('modules',
default=[],
help='The list of modules to copy from openstack-common'),
cfg.StrOpt('base',
default=None,
help='The base module to hold the copy of openstack.common'),
cfg.StrOpt('dest-dir', default=None, help='Destination project directory'),
]
def _parse_args(argv):
conf = cfg.ConfigOpts()
conf.register_cli_opts(opts)
args = conf(argv, usage='Usage: %prog [config-file|dest-dir]')
if len(args) == 1: