def run():
# some SD cards won't work in 4-bit mode unless freq() is explicitely set
freq(240 * 1000 * 1000) # 80/160/240 MHz, faster CPU = faster SD card
#sd=SDCard(slot=3) # 1-bit mode
sd = SDCard() # 4-bit mode
mount(sd, "/sd")
print(listdir("/sd"))
f = open("/sd/long_file.bin", "rb") # any 1-10 MB long file
b = bytearray(16 * 1024)
i = 0
t1 = ticks_ms()
while f.readinto(b):
i += 1
t2 = ticks_ms()
print("%d KB in %d ms => %d KB/s file read" %
(i * len(b) // 1024, t2 - t1, 1000 * i * len(b) // 1024 //
(t2 - t1)))
f.close()
umount("/sd")
i = 0
t1 = ticks_ms()
while i < 256:
sd.readblocks(i, b)
i += 1
t2 = ticks_ms()
print("%d KB in %d ms => %d KB/s raw sector read" %
(i * len(b) // 1024, t2 - t1, 1000 * i * len(b) // 1024 //
(t2 - t1)))
sd.deinit()
def wipe():
"""
Blocks map in disco board
0: MBR
1 - 255: reserved
256 - 447: internal flash
448 - 33215: QSPI
"""
# delete files normally in simulator
try:
delete_recursively(fpath("/flash"))
delete_recursively(fpath("/qspi"))
except:
pass
# on real hardware overwrite flash with random data
if not simulator:
os.umount("/flash")
os.umount("/qspi")
f = pyb.Flash()
block_size = f.ioctl(5, None)
# wipe internal flash with random bytes
for i in range(256, 450):
b = os.urandom(block_size)
f.writeblocks(i, b)
del b
gc.collect()
# mpy will reformat fs on reboot
reboot()
def wipe_flash_filesystem():
# erase and re-format the flash filesystem (/flash/)
import ckcc, pyb
from main import dis, settings
dis.fullscreen('Erasing...')
os.umount('/flash')
# from extmod/vfs.h
BP_IOCTL_SEC_COUNT = (4)
BP_IOCTL_SEC_SIZE = (5)
# block-level erase
fl = pyb.Flash()
bsize = fl.ioctl(BP_IOCTL_SEC_SIZE, 0)
assert bsize == 512
bcount = fl.ioctl(BP_IOCTL_SEC_COUNT, 0)
blk = bytearray(bsize)
ckcc.rng_bytes(blk)
# trickiness: actual flash blocks are offset by 0x100 (FLASH_PART1_START_BLOCK)
# so fake MBR can be inserted. Count also inflated by 2X, but not from ioctl above.
for n in range(bcount):
fl.writeblocks(n + 0x100, blk)
ckcc.rng_bytes(blk)
dis.progress_bar_show(n * 2 / bcount)
# rebuild and mount /flash
dis.fullscreen('Rebuilding...')
ckcc.wipe_fs()
# re-store settings
settings.save()
def wipe_microsd_card():
import ckcc, pyb
from main import dis
try:
os.umount('/sd')
except:
pass
sd = pyb.SDCard()
assert sd
if not sd.present(): return
# power cycle so card details (like size) are re-read from current card
sd.power(0)
sd.power(1)
dis.fullscreen('Part Erase...')
cutoff = 1024 # arbitrary
blk = bytearray(512)
for bnum in range(cutoff):
ckcc.rng_bytes(blk)
sd.writeblocks(bnum, blk)
dis.progress_bar_show(bnum / cutoff)
dis.fullscreen('Formating...')
# remount, with newfs option
os.mount(sd, '/sd', readonly=0, mkfs=1)
def quick_test_hw(hw):
_logger.info("Starting quick self test...")
pycom_util.reset_rgbled()
_logger.info("Starting hardware quick check")
chrono = machine.Timer.Chrono()
chrono.start()
with CheckStep(FLAG_MOSFET_PIN, suppress_exception=True):
if hw.mosfet_pin:
_logger.info("Mosfet pin state: %s", hw.mosfet_pin())
wdt.feed()
with CheckStep(FLAG_SD_CARD, suppress_exception=True):
import os
mountpoint = "/co2_sd_card_test"
os.mount(hw.sdcard, mountpoint)
contents = os.listdir(mountpoint)
os.umount(mountpoint)
_logger.info("SD card OK. Contents: %s", contents)
wdt.feed()
with CheckStep(FLAG_ERTC, suppress_exception=True):
ertc = hw.ertc
time_tuple = ertc.get_time()
_logger.info("External RTC ok. Current time: %s", time_tuple)
wdt.feed()
with CheckStep(FLAG_CO2, suppress_exception=True):
import explorir
co2 = hw.co2
co2.set_mode(explorir.MODE_POLLING)
reading = co2.read_co2()
_logger.info("CO2 sensor ok. Current level: %d ppm", reading)
wdt.feed()
with CheckStep(FLAG_ETEMP, suppress_exception=True):
etemp = hw.etemp
_logger.debug("Starting external temp read. Can take up to 750ms.")
etemp.start_conversion()
chrono.reset()
while True:
reading = etemp.read_temp_async()
if reading: break
if chrono.read_ms() > 1000:
raise TimeoutError(
"Timeout reading external temp sensor after %d ms" %
chrono.read_ms())
_logger.info("External temp sensor ok. Current temp: %s C", reading)
wdt.feed()
show_boot_flags()
_logger.info("Failures after quick hardware check: 0x%04x", failures)
display_errors_led()
wdt.feed()
pycom.rgbled(0x0)
def sdtest2():
spi = machine.SPI(1)
spi.init() # Ensure right baudrate
sd = sdcard.SDCard(spi, machine.Pin(15)) # Compatible with PCB
# vfs = os.VfsLfs2(sd)
vfs = os.VfsFat(sd)
os.mount(vfs, "/fc")
print("Filesystem check")
print(os.listdir("/fc"))
line = "abcdefghijklmnopqrstuvwxyz\n"
lines = line * 200 # 5400 chars
short = "1234567890\n"
fn = "/fc/rats.txt"
print()
print("Multiple block read/write")
with open(fn, "w") as f:
n = f.write(lines)
print(n, "bytes written")
n = f.write(short)
print(n, "bytes written")
n = f.write(lines)
print(n, "bytes written")
with open(fn, "r") as f:
result1 = f.read()
print(len(result1), "bytes read")
fn = "/fc/rats1.txt"
print()
print("Single block read/write")
with open(fn, "w") as f:
n = f.write(short) # one block
print(n, "bytes written")
with open(fn, "r") as f:
result2 = f.read()
print(len(result2), "bytes read")
os.umount("/fc")
print()
print("Verifying data read back")
success = True
if result1 == "".join((lines, short, lines)):
print("Large file Pass")
else:
print("Large file Fail")
success = False
if result2 == short:
print("Small file Pass")
else:
print("Small file Fail")
success = False
print()
print("Tests", "passed" if success else "failed")
def sdtest():
spi = machine.SPI(1)
spi.init() # Ensure right baudrate
sd = sdcard.SDCard(spi, machine.Pin.board.X21) # Compatible with PCB
vfs = os.VfsFat(sd)
os.mount(vfs, '/fc')
print('Filesystem check')
print(os.listdir('/fc'))
line = 'abcdefghijklmnopqrstuvwxyz\n'
lines = line * 200 # 5400 chars
short = '1234567890\n'
fn = '/fc/rats.txt'
print()
print('Multiple block read/write')
with open(fn,'w') as f:
n = f.write(lines)
print(n, 'bytes written')
n = f.write(short)
print(n, 'bytes written')
n = f.write(lines)
print(n, 'bytes written')
with open(fn,'r') as f:
result1 = f.read()
print(len(result1), 'bytes read')
fn = '/fc/rats1.txt'
print()
print('Single block read/write')
with open(fn,'w') as f:
n = f.write(short) # one block
print(n, 'bytes written')
with open(fn,'r') as f:
result2 = f.read()
print(len(result2), 'bytes read')
os.umount('/fc')
print()
print('Verifying data read back')
success = True
if result1 == ''.join((lines, short, lines)):
print('Large file Pass')
else:
print('Large file Fail')
success = False
if result2 == short:
print('Small file Pass')
else:
print('Small file Fail')
success = False
print()
print('Tests', 'passed' if success else 'failed')
def unmount_sdcard() -> bool:
"""Unmounts SD card"""
# sync file system before unmounting
if not is_sd_present():
raise RuntimeError("SD card is not present")
if sdcard is not None:
os.sync()
os.umount("/sd")
sdcard.power(False)
sdled.off()
def fs_unuse_sd():
global sd_vfs_fat
global sd_mnt_point
if sd_vfs_fat == None:
print("SD not used")
return
os.umount(sd_mnt_point)
sd_vfs_fat = None
print("SD unmounted")
def recover(self):
self.active = False
try:
os.umount('/sd')
except:
pass
# important: turn off power so touch can work again
sd = pyb.SDCard()
sd.power(0)
def recover(self):
# done using the microSD -- unpower it
self.active_led.off()
self.active = False
try:
os.umount('/sd')
except: pass
# important: turn off power so touch can work again
sd = pyb.SDCard()
sd.power(0)
def change_file(self):
oldselected = self.fb_selected - self.fb_topitem
self.fb_selected = self.fb_cursor
try:
filename = self.fullpath(self.direntries[self.fb_cursor][0])
except:
filename = False
self.fb_selected = -1
self.show_dir_line(oldselected)
self.show_dir_line(self.fb_cursor - self.fb_topitem)
if filename:
if filename.endswith(".bit"):
self.spi_request.irq(handler=None)
self.timer.deinit()
self.enable[0] = 0
self.osd_enable(0)
self.spi.deinit()
tap = ecp5.ecp5()
tap.prog_stream(open(filename, "rb"), blocksize=1024)
if filename.endswith("_sd.bit"):
os.umount("/sd")
for i in bytearray([2, 4, 12, 13, 14, 15]):
p = Pin(i, Pin.IN)
a = p.value()
del p, a
result = tap.prog_close()
del tap
gc.collect()
#os.mount(SDCard(slot=3),"/sd") # BUG, won't work
self.init_spi() # because of ecp5.prog() spi.deinit()
self.spi_request.irq(trigger=Pin.IRQ_FALLING,
handler=self.irq_handler_ref)
self.irq_handler(0) # handle stuck IRQ
if filename.endswith(".z80"):
self.enable[0] = 0
self.osd_enable(0)
import ld_zxspectrum
s = ld_zxspectrum.ld_zxspectrum(self.spi, self.cs)
s.loadz80(filename)
del s
gc.collect()
if filename.endswith(".nes"):
import ld_zxspectrum
s = ld_zxspectrum.ld_zxspectrum(self.spi, self.cs)
s.ctrl(1)
s.ctrl(0)
s.load_stream(open(filename, "rb"), addr=0, maxlen=0x101000)
del s
gc.collect()
self.enable[0] = 0
self.osd_enable(0)
def stop(self):
if self.mounted:
self.mounted = False
try:
os.umount(self.sd_path)
except Exception as e:
sys.print_exception(e)
print('sd umount failure')
if self.inited:
try:
self.sdcard.deinit()
except Exception as e:
sys.print_exception(e)
print('sd deinit failure')
def recover(self):
# done using the microSD -- unpower it
from main import numpad
self.active = False
try:
os.umount('/sd')
except: pass
# important: turn off power so touch can work again
sd = pyb.SDCard()
sd.power(0)
numpad.start()
def test_format_sd():
sd_mnt_point = "/sd"
spi = machine.SPI(1,
sck=machine.Pin(10),
mosi=machine.Pin(11),
miso=machine.Pin(12),
baudrate=10000)
cs = machine.Pin(15)
sd = sdcard.SDCard(spi, cs)
os.VfsFat.mkfs(sd)
sd_vfs_fat = os.VfsFat(sd)
os.mount(sd_vfs_fat, sd_mnt_point)
print("SD mounted")
os.umount(sd_mnt_point)
print("SD unmounted")
def create_loopback_devices(osds: int) -> None:
assert osds
size = (5 * osds) + 1
print(f'Using {size}GB of data to store osds')
# loop_dev = run_shell_command('sudo losetup -f')
loop_dev = '/dev/loop111'
run_shell_command(f'sudo rm -f {loop_dev}')
run_shell_command(f'sudo mknod -m 0777 {loop_dev} b 7 111')
# cleanup last call
cleanup()
if os.path.ismount(loop_dev):
os.umount(loop_dev)
loop_devices = json.loads(
run_shell_command('losetup -l -J', expect_error=True))
for dev in loop_devices['loopdevices']:
if dev['name'] == loop_dev:
run_shell_command(f'sudo losetup -d {loop_dev}')
if not os.path.exists('./loop-images'):
os.mkdir('loop-images')
remove_loop_img()
loop_image = Config.get('loop_img')
run_shell_command(
f'sudo dd if=/dev/zero of={loop_image} bs=1 count=0 seek={size}G')
run_shell_command(f'sudo losetup {loop_dev} {loop_image}')
run_shell_command(f'sudo pvcreate {loop_dev} ')
run_shell_command(f'sudo vgcreate vg1 {loop_dev}')
p = int(
100 / osds
) # FIXME: 100 osds is the maximum because of lvcreate pct (it doesn't seem to work with lots more decimals)
for i in range(osds):
run_shell_command('sudo vgchange --refresh')
run_shell_command(f'sudo lvcreate -l {p}%VG --name lv{i} vg1')
# FIXME: use /dev/vg1/lv* links as it is less hacky (there could be unrelated dm devices)
run_shell_command(f'sudo chmod 777 /dev/dm-*')
return loop_dev
def sdtest1():
spi = machine.SPI(1, sck=machine.Pin(10), mosi=machine.Pin(11), miso=machine.Pin(12))
spi = machine.SPI(1)
cs = machine.Pin(15)
sd = sdcard.SDCard(spi, cs)
vfs = os.VfsFat(sd)
os.mount(vfs, '/sd')
os.mkdir('/sd/sd2')
os.chdir('/sd/sd2')
with open("pico2.txt", "a") as file:
for i in range(10):
file.write(str(i)+"2. Hello, world!\r\n")
os.chdir('/')
os.umount("/sd")
def create_loopback_devices(osds: int) -> None:
assert osds
size = (5 * osds) + 1
print(f'Using {size}GB of data to store osds')
avail_loop = run_shell_command('sudo losetup -f')
base_name = os.path.basename(avail_loop)
# create loop if we cannot find it
if not os.path.exists(avail_loop):
num_loops = int(
run_shell_command('lsmod | grep loop | awk \'{print $3}\''))
num_loops += 1
run_shell_command(f'mknod {avail_loop} b 7 {num_loops}')
if os.path.ismount(avail_loop):
os.umount(avail_loop)
loop_devices = json.loads(
run_shell_command(f'losetup -l -J', expect_error=True))
for dev in loop_devices['loopdevices']:
if dev['name'] == avail_loop:
run_shell_command(f'sudo losetup -d {avail_loop}')
if not os.path.exists('./loop-images'):
os.mkdir('loop-images')
remove_loop_img()
loop_image = Config.get('loop_img')
run_shell_command(
f'sudo dd if=/dev/zero of={loop_image} bs=1 count=0 seek={size}G')
run_shell_command(f'sudo losetup {avail_loop} {loop_image}')
# cleanup last call
cleanup()
run_shell_command(f'sudo pvcreate {avail_loop} ')
run_shell_command(f'sudo vgcreate vg1 {avail_loop}')
p = int(100 / osds)
for i in range(osds):
run_shell_command('sudo vgchange --refresh')
run_shell_command(f'sudo lvcreate -l {p}%VG --name lv{i} vg1')
def wipe_microsd_card():
# Erase and re-format SD card. Not secure erase, because that is too slow.
import callgate
import pyb
from common import dis
try:
os.umount('/sd')
except:
pass
sd = pyb.SDCard()
assert sd
if not sd.present():
return
# power cycle so card details (like size) are re-read from current card
sd.power(0)
sd.power(1)
dis.fullscreen('Part Erase...')
cutoff = 1024 # arbitrary
blk = bytearray(512)
for bnum in range(cutoff):
callgate.fill_random(blk)
sd.writeblocks(bnum, blk)
dis.progress_bar_show(bnum / cutoff)
dis.fullscreen('Formating...')
# remount, with newfs option
os.mount(sd, '/sd', readonly=0, mkfs=1)
# done, cleanup
os.umount('/sd')
# important: turn off power
sd = pyb.SDCard()
sd.power(0)
def toggle_led_sd(x,
butpress=sd_detect,
light=led,
sd_spi=spi,
sd_cs=cs,
getinfo=pd_txtfiles):
global irq_busy_sd, sd_out, sd
if irq_busy_sd:
return
else:
irq_busy_sd = True
if butpress.value() == 1: # reverse op == 0
if sd_out is True:
print('SD card detected')
for i in range(4):
led.value(not led.value())
time.sleep_ms(250)
butpress.init(Pin.OUT)
sd = sdcard.SDCard(sd_spi, sd_cs)
time.sleep_ms(1000)
os.mount(sd, '/sd')
print(os.listdir('/'))
# butpress.value(0) # reverse op == 1
butpress.init(Pin.IN)
getinfo("/sd")
sd_out = False
# butpress.init(Pin.IN, Pin.PULL_UP)
elif butpress.value() == 0:
if sd_out is False:
print('SD card removed')
for i in range(4):
led.value(not led.value())
time.sleep_ms(250)
time.sleep_ms(1000)
butpress.init(Pin.OUT)
os.umount('/sd')
time.sleep_ms(1000)
sd_out = True
irq_busy_sd = False
def prepare_for_shutdown(self):
if self.sd_mounted:
_logger.info("Unmounting SD card")
try:
os.umount(self.SDCARD_MOUNT_POINT)
except:
_logger.exception("Could not unmount SD card")
try:
self.power_peripherals(False)
except:
_logger.exception("Could not cut power to peripherals")
try:
self.hold_pins()
except:
_logger.exception("Could not hold pins")
try:
self.set_wake_on_flash_pin()
except:
_logger.exception("Could not set wake on flash pin")
def load(debug=False, sd=None):
"""
Load off SD our AP, pw, and URL details
:param debug: Logging
:param sd: SD object if mounted already
:return: Config object
"""
from machine import SD
cfg = None
try:
unmount = False
if sd is None:
sd = SD()
os.mount(sd, '/sd')
unmount = True
cfg = Config.load_file(open(Config.SD_CONFIG_PATH,"r"), debug)
if unmount:
try:
os.unmount('/sd') # got renamed in upy 1.9
except AttributeError:
os.umount('/sd')
sd.deinit()
del sd
except OSError:
print("Can't open config file SD card")
if not cfg:
cfg = Config.load_file(open(Config.FLASH_CONFIG_PATH, "r"), debug)
if not cfg:
raise ValueError("No config file!")
print("Loaded from flash")
cfg.src = "flash"
else:
print("Loaded from SD card")
cfg.src = "sd"
return cfg
def umount():
global SD,spi
try:
os.umount("/sd")
try:
SD.deinit()
del SD
except:
pass
try:
spi.deinit()
del spi
except:
pass
# let all SD pins be inputs
import sdpin
for i in sdpin.hiz:
p = Pin(i,Pin.IN)
a = p.value()
del p, a
return True
except:
return False
def change_file(self):
oldselected = self.fb_selected - self.fb_topitem
self.fb_selected = self.fb_cursor
try:
filename = self.fullpath(self.direntries[self.fb_cursor][0])
except:
filename = False
self.fb_selected = -1
self.show_dir_line(oldselected)
self.show_dir_line(self.fb_cursor - self.fb_topitem)
if filename:
if filename.endswith(".bit"):
self.spi_request.irq(handler=None)
self.timer.deinit()
self.enable[0] = 0
self.osd_enable(0)
self.spi.deinit()
tap = ecp5.ecp5()
tap.prog_stream(open(filename, "rb"), blocksize=1024)
if filename.endswith("_sd.bit"):
os.umount("/sd")
for i in bytearray([2, 4, 12, 13, 14, 15]):
p = Pin(i, Pin.IN)
a = p.value()
del p, a
result = tap.prog_close()
del tap
gc.collect()
#os.mount(SDCard(slot=3),"/sd") # BUG, won't work
self.init_spi() # because of ecp5.prog() spi.deinit()
self.spi_request.irq(trigger=Pin.IRQ_FALLING,
handler=self.irq_handler_ref)
self.irq_handler(0) # handle stuck IRQ
if filename.endswith(".nes") \
or filename.endswith(".snes") \
or filename.endswith(".smc") \
or filename.endswith(".sfc"):
import ld_nes
s = ld_nes.ld_nes(self.spi, self.cs)
s.ctrl(1)
s.ctrl(0)
s.load_stream(open(filename, "rb"), addr=0, maxlen=0x101000)
del s
gc.collect()
self.enable[0] = 0
self.osd_enable(0)
if filename.startswith(
"/sd/ti99_4a/") and filename.lower().endswith(".bin"):
import ld_ti99_4a
s = ld_ti99_4a.ld_ti99_4a(self.spi, self.cs)
s.load_rom_auto(open(filename, "rb"), filename)
del s
gc.collect()
self.enable[0] = 0
self.osd_enable(0)
if (filename.startswith("/sd/msx") and filename.endswith(".rom")) \
or filename.endswith(".mx1"):
import ld_msx
s = ld_msx.ld_msx(self.spi, self.cs)
s.load_msx_rom(open(filename, "rb"))
del s
gc.collect()
self.enable[0] = 0
self.osd_enable(0)
if filename.endswith(".z80"):
self.enable[0] = 0
self.osd_enable(0)
import ld_zxspectrum
s = ld_zxspectrum.ld_zxspectrum(self.spi, self.cs)
s.loadz80(filename)
del s
gc.collect()
if filename.endswith(".ora") or filename.endswith(".orao"):
self.enable[0] = 0
self.osd_enable(0)
import ld_orao
s = ld_orao.ld_orao(self.spi, self.cs)
s.loadorao(filename)
del s
gc.collect()
if filename.endswith(".vsf"):
self.enable[0] = 0
self.osd_enable(0)
import ld_vic20
s = ld_vic20.ld_vic20(self.spi, self.cs)
s.loadvsf(filename)
del s
gc.collect()
if filename.endswith(".prg"):
self.enable[0] = 0
self.osd_enable(0)
import ld_vic20
s = ld_vic20.ld_vic20(self.spi, self.cs)
s.loadprg(filename)
del s
gc.collect()
if filename.endswith(".cas"):
self.enable[0] = 0
self.osd_enable(0)
import ld_trs80
s = ld_trs80.ld_trs80(self.spi, self.cs)
s.loadcas(filename)
del s
gc.collect()
if filename.endswith(".cmd"):
self.enable[0] = 0
self.osd_enable(0)
import ld_trs80
s = ld_trs80.ld_trs80(self.spi, self.cs)
s.loadcmd(filename)
del s
gc.collect()
def close(self):
if self.vfs is not None:
umount('/fc')
print("SD Desmontada")
# inicializacion modulo SD
Pin(18, Pin.OUT, value=1) #para desactivar LoRa
spi = SPI(sck=Pin(23), miso=Pin(12), mosi=Pin(13))
sd = sdcard.SDCard(spi, Pin(2, Pin.OUT))
oled.text('Modulo SD listo', 0, 10)
oled.show()
# inicializacion modulo GPS
gps = UART(2, 115200)
gps.init(9600, bits=8, parity=None, stop=1, tx=17, rx=5)
oled.text('Gps...OK', 0, 20)
oled.show()
os.mount(sd, '/fc')
gps_data = 'hola123'
filename = '/fc/gps_data.txt'
with open(filename, 'w') as f:
n = f.write(gps_data)
print(n, 'bytes written')
with open(filename, 'r') as f:
result1 = f.read()
print(len(result1), 'bytes read')
os.umount('/fc')
time.sleep(0.8)
Pin(25, Pin.OUT, value=0)
time.sleep(0.8)
Pin(25, Pin.OUT, value=1)
grub_partition = "(hd%c,%c)" % ( partition[ "name" ][ -2 ], partition[ "name" ][ -1 ] ) f = open( "/media/install/boot/grub/menu.lst", "w" ) f.write( "title yaOSp\n" ) f.write( "root %s\n" % grub_partition ) f.write( "kernel /system/kernel root=%s\n" % ( partition[ "name" ] ) ) f.write( "module /system/module/bus/pci\n" ) f.write( "module /system/module/disk/pata\n" ) f.write( "module /system/module/disk/partition\n" ) f.write( "module /system/module/filesystem/ext2\n" ) f.write( "module /system/module/input/ps2\n" ) f.write( "module /system/module/input/input\n" ) f.write( "module /system/module/char/terminal\n" ) f.close() os.umount( "/media/install" ) # We're done :) print print "The installation of yaOSp is done." print "You have to restart and install GRUB manually by following these steps:" print " * Press 'c' when GRUB is loaded" print " * Type 'root %s'" % ( grub_partition ) print " * Type 'setup (hd%c)'" % ( partition[ "name" ][ -2 ] ) print " * You're done, remove the CD and reboot." print print "Thanks for choosing yaOSp :)"
def umount_sd():
os.umount('/sd')
ls('/')
# SD card
import machine, os
# Slot 2 uses pins sck=18, cs=5, miso=19, mosi=23
sd = machine.SDCard(slot=2)
os.mount(sd, "/sd") # mount
os.listdir('/sd') # list directory contents
os.umount('/sd') # eject
def umount(self, root):
os.umount(root)
def sdtest():
print("1")
#hardware spi
spi = SPI(2,
baudrate=10000000,
polarity=0,
phase=0,
bits=8,
firstbit=SPI.MSB,
sck=Pin(18, Pin.OUT, Pin.PULL_DOWN),
mosi=Pin(23, Pin.OUT, Pin.PULL_UP),
miso=Pin(19, Pin.IN, Pin.PULL_UP))
spi.init() # Ensure right baudrate
sd = sdcard.SDCard(spi, Pin(22)) # Compatible with PCB
vfs = os.VfsFat(sd)
os.mount(vfs, "/fc")
print("Filesystem check")
print(os.listdir("/fc"))
print("1")
line = "abcdefghijklmnopqrstuvwxyz\n"
lines = line * 200 # 5400 chars
short = "1234567890\n"
print("1")
fn = "/fc/rats.txt"
print()
print("Multiple block read/write")
with open(fn, "w") as f:
n = f.write(lines)
print(n, "bytes written")
n = f.write(short)
print(n, "bytes written")
n = f.write(lines)
print(n, "bytes written")
with open(fn, "r") as f:
result1 = f.read()
print(len(result1), "bytes read")
fn = "/fc/rats1.txt"
print()
print("Single block read/write")
with open(fn, "w") as f:
n = f.write(short) # one block
print(n, "bytes written")
with open(fn, "r") as f:
result2 = f.read()
print(len(result2), "bytes read")
os.umount("/fc")
print()
print("Verifying data read back")
success = True
if result1 == "".join((lines, short, lines)):
print("Large file Pass")
else:
print("Large file Fail")
success = False
if result2 == short:
print("Small file Pass")
else:
print("Small file Fail")
success = False
print()
print("Tests", "passed" if success else "failed")
self.readinto(mv[offset : offset + 512])
offset += 512
nblocks -= 1
return self.cmd_nodata(b'\x0c')
return 0
def writeblocks(self, block_num, buf):
nblocks, err = divmod(len(buf), 512)
assert nblocks and not err, 'Buffer length is invalid'
if nblocks == 1:
if self.cmd(24, block_num * self.cdv, 0) != 0:
return 1
self.write(_TOKEN_DATA, buf)
else:
if self.cmd(25, block_num * self.cdv, 0) != 0:
return 1
offset = 0
mv = memoryview(buf)
while nblocks:
self.write(_TOKEN_CMD25, mv[offset : offset + 512])
offset += 512
nblocks -= 1
self.write_token(_TOKEN_STOP_TRAN)
return 0
import machine, sdcard, os
sd = sdcard.SDCard(machine.SPI(0), machine.Pin(15))
os.umount()
os.VfsFat(sd, "")
os.listdir()
time.sleep_ms(200)
try:
measurement = scd30.read_measurement()
data['co2'] = measurement[0][0]
data['temperature'] = measurement[1][0]
data['humidity'] = measurement[2][0]
print('co2: {}, temperature: {}, humidity: {}'.format(
data['co2'], data['temperature'], data['humidity']))
except SCD30.CRCException:
print('CRC exception during measurement reading SCD30')
errled.on()
pass
# Create logfile per day...
datetimeformat = '{:04d}-{:02d}-{:02d}T{:02d}:{:02d}:{:02d}'
isodatetime = datetimeformat.format(t[0], t[1], t[2], t[3], t[4], t[5])
name = 'sensordata_{:04d}_{:02d}_{:02d}.log'.format(t[0], t[1], t[2])
with open("/sd/" + name, "a") as f:
f.write("{};{};{};{};\n".format(isodatetime, data['co2'],
data['temperature'],
data['humidity']))
os.umount('/sd')
sd.power(0)
en_3v3.value(0)
led.off()
# Sleep for 300 seconds...
time.sleep(300)
