def parse(self):
data = self.data # convenience abbreviation
# Sector 39, 0xF00, for various indexes
sdata = mfclassic_getsector(data, 39)[:-0x10]
offset,size = mfclassic_getoffset(39)
# at F00: just zeros
#print "f00: %x" % (getbits(sdata[0:0x10], 0, 16*8))
# indexes at FB0, FD0
index1 = OvcIndexFB0(sdata[0xb0:0xb0+0x20], ovc=self)
index2 = OvcIndexFB0(sdata[0xd0:0xd0+0x20], ovc=self)
s1 = "fb0:"
s2 = "fd0:"
if index1.get('transact-id') < index2.get('transact-id'):
self.FB0_curr = index2
self.FB0_curr_prefix = s2
self.FB0_prev = index1
self.FB0_prev_prefix = s1
else:
self.FB0_curr = index1
self.FB0_curr_prefix = s1
self.FB0_prev = index2
self.FB0_prev_prefix = s2
latest_credit = self.FB0_curr.latest_credit
latest_travel = self.FB0_curr.latest_travel
latest_subscr = self.FB0_curr.latest_subscr
# Credit at F90 and FA0
locs = [ 0x90, 0xa0 ]
loc_curr = locs[latest_credit]
loc_prev = locs[1 - latest_credit]
self.saldo_curr = OvcSaldo(sdata[loc_curr:loc_curr+0x10], ovc=self)
self.saldo_prev = OvcSaldo(sdata[loc_prev:loc_prev+0x10], ovc=self)
self.saldo_curr_prefix = "%3x:" % (0xf00 + loc_curr)
self.saldo_prev_prefix = "%3x:" % (0xf00 + loc_prev)
# indexes at F10, F30, 0x20 long
locs = [ 0x10, 0x30 ]
loc_curr = locs[latest_subscr]
loc_prev = locs[1 - latest_subscr]
self.F10_curr = OvcIndexF10(sdata[loc_curr:loc_curr+0x20], ovc=self)
self.F10_prev = OvcIndexF10(sdata[loc_prev:loc_prev+0x20], ovc=self)
self.F10_curr_prefix = "%3x:" % (0xf00 + loc_curr)
self.F10_prev_prefix = "%3x:" % (0xf00 + loc_prev)
# indexes at F50, F70;
# something to do with travel (check in/out) transactions
locs = [ 0x50, 0x70 ]
loc_curr = locs[latest_travel]
loc_prev = locs[1 - latest_travel]
self.F50_curr = OvcIndexF50(sdata[loc_curr:loc_curr+0x20], ovc=self)
self.F50_prev = OvcIndexF50(sdata[loc_prev:loc_prev+0x20], ovc=self)
self.F50_curr_prefix = "%3x:" % (0xf00 + loc_curr)
self.F50_prev_prefix = "%3x:" % (0xf00 + loc_prev)
self.F50_curr.setIndexes(self.FB0_curr)
self.F50_prev.setIndexes(self.FB0_prev)
def printit(self):
data = self.data
# card details
# note that these data areas are not yet fully understood
cardid = getbits(data[0:4], 0, 4*8)
cardtype = OvcCardType(getbits(data[0x10:0x36], 18*8+4, 19*8))
validuntil = OvcDate(getbits(data[0x10:0x36], 11*8+6, 13*8+4))
s = 'OV-Chipkaart id %d, %s, valid until %s'%(cardid, cardtype, validuntil)
#if cardtype==2:
# birthdate = OvcBcdDate(getbits(mfclassic_getsector(data, 22), 14*8, 18*8))
# s += ', birthdate %s'%birthdate
print s
for sector in range(22, 24):
sdata = mfclassic_getsector(data, sector)[:-0x10]
offset,size = mfclassic_getoffset(sector)
sector22 = OvcSector22(sdata, ovc=self, cardtype=cardtype)
print ("%3x:" % offset), sector22
print ""
# subscriptions
# Print the slot number value for this subscription before it and the idsubs after it.
print "Subscriptions:"
log_entry = 0
for sector in range(32, 35):
sdata = mfclassic_getsector(data, sector)[:-0x10]
offset,size = mfclassic_getoffset(sector)
for chunk in range(0, len(sdata), 0x30):
l = log_entry
log_entry += 1
if ord(sdata[chunk]) == 0: continue
addr = offset + chunk
sys.stdout.write(('#%x=%03x: ' % (l, addr)))
#Oldest method:
#print OvcClassicTransaction(sdata[chunk:chunk+0x30])
#sys.stdout.write(' : ')
#Method #2:
#print OvcSubscriptionRecord.make(sdata[chunk:chunk+0x30], ovc=self)
#sys.stdout.write(' : ')
#Method #3:
s = OvcVariableSubscription(sdata[chunk:chunk+0x30], ovc=self)
print s
aux_addr = OvcSubscriptionAux.addr(l)
aux_sdata = data[aux_addr:aux_addr+0x10]
sys.stdout.write((' %03x: ' % (aux_addr)))
s_aux = OvcSubscriptionAux(aux_sdata, ovc=self)
print s_aux, OvcSubscriptionId(self.find_subscr_id(l))
self.subscr[l] = s
self.subscr_aux[l] = s_aux
# transactions
print "Transaction logs: (history, checkin/out, credit)"
# Entries 0-10: for User, chronologic, may be erased?
# Entries 11-23: for Conductor, not chronologic, only one check-in
# Entries 24-27: add Credit transactions
start_log_0 = 0
start_log_1 = 11
start_log_2 = 24
log_entry = 0
for sector in range(35, 39):
sdata = mfclassic_getsector(data, sector)[:-0x10]
offset,size = mfclassic_getoffset(sector)
for chunk in range(0, len(sdata), 0x20):
if (chunk + 0x20) > len(sdata): continue # last few bytes, not big enough
l = log_entry
log_entry += 1
if l == start_log_1 or l == start_log_2: print "--"
if ord(sdata[chunk]) == 0: continue
if l >= start_log_2: l = OvcMostRecentCreditIndex.map[l - start_log_2 - 1]
elif l >= start_log_1: l = l - start_log_1
sys.stdout.write(('#%x=%03x: ' % (l, offset + chunk)))
#print OvcClassicTransaction(sdata[chunk:chunk+0x20])
print OvcVariableTransaction(sdata[chunk:chunk+0x20], ovc=self)
print
print "Credit: (current and previous)"
print self.saldo_curr_prefix, str(self.saldo_curr)
print self.saldo_prev_prefix, str(self.saldo_prev)
if not self.saldo_prev.id <= self.saldo_curr.id:
print "Order bit 250 in 0xFB0/FD0 contradicted by id order"
print
print "Main index (current and previous):"
print self.FB0_curr_prefix, str(self.FB0_curr)
print self.FB0_prev_prefix, str(self.FB0_prev)
print
print "Check-in and check-out indexes (current and previous):"
print self.F50_curr_prefix, str(self.F50_curr)
print self.F50_prev_prefix, str(self.F50_prev)
print
print "Most recent subscription (current and previous):"
print self.F10_curr_prefix, str(self.F10_curr)
print self.F10_prev_prefix, str(self.F10_prev)
if not self.F10_prev.size <= self.F10_curr.size:
# Maybe this will also occur if nearly all slots are taken
# and they are being re-used
print "Order bit 248 in 0xFB0/FD0 contradicted by subscription order (list getting full?)"
for fn in sys.argv[1:]: inp = open(fn, 'rb') data = inp.read() inp.close() if len(data) == 4096: # mifare classic 4k # card details # TODO make the card an object in itself with fixed-position templates # note that these data areas are not yet fully understood cardid = getbits(data[0:4], 0, 4*8) cardtype = OvcCardType(getbits(data[0x10:0x36], 18*8+4, 19*8)) validuntil = OvcDate(getbits(data[0x10:0x36], 11*8+6, 13*8+4)) s = 'OV-Chipkaart id %d, %s, valid until %s'%(cardid, cardtype, validuntil) if cardtype==2: birthdate = OvcBcdDate(getbits(mfclassic_getsector(data, 22), 14*8, 18*8)) s += ', birthdate %s'%birthdate print s # transactions for sector in range(32, 35): sdata = mfclassic_getsector(data, sector)[:-0x10] for chunk in range(0, len(sdata), 0x30): if ord(sdata[chunk]) == 0: continue print OvcClassicTransaction(sdata[chunk:chunk+0x30]) for sector in range(35, 39): sdata = mfclassic_getsector(data, sector)[:-0x10] for chunk in range(0, len(sdata), 0x20): if ord(sdata[chunk]) == 0: continue print OvcClassicTransaction(sdata[chunk:chunk+0x20])
if __name__ == '__main__':
if len(sys.argv) < 2:
sys.stderr.write('Usage: %s <ovc_dump> [<ovc_dump_2> [...]]\n'%sys.argv[0])
sys.exit(1)
for fn in sys.argv[1:]:
inp = open(fn, 'r')
data = inp.read()
inp.close()
if len(data) == 4096: # mifare classic 4k
# TODO card id, expdate, birthdate, etc.
# transactions
sdata = mfclassic_getsector(data, 0)
#card ID (first 4 bytes)
id = 0
for i in range(0, 4):
id = id * 256
id = id + ord(sdata[i])
print "Kaard id: " + str(id)
#expiration date
tmp = 0
for i in range(27, 30):
tmp = tmp * 256
tmp = tmp + ord(sdata[i])
date = datetime.date(1997, 1, 1)
date += datetime.timedelta(tmp >> 4)
inp.close()
if len(data) == 4096: # mifare classic 4k
# card details
# TODO make the card an object in itself with fixed-position templates
# note that these data areas are not yet fully understood
cardid = getbits(data[0:4], 0, 4 * 8)
cardtype = OvcCardType(getbits(data[0x10:0x36], 18 * 8 + 4,
19 * 8))
validuntil = OvcDate(
getbits(data[0x10:0x36], 11 * 8 + 6, 13 * 8 + 4))
s = 'OV-Chipkaart id %d, %s, valid until %s' % (cardid, cardtype,
validuntil)
if cardtype == 2:
birthdate = OvcBcdDate(
getbits(mfclassic_getsector(data, 22), 14 * 8, 18 * 8))
s += ', birthdate %s' % birthdate
print s
# transactions
for sector in range(32, 35):
sdata = mfclassic_getsector(data, sector)[:-0x10]
for chunk in range(0, len(sdata), 0x30):
if ord(sdata[chunk]) == 0: continue
print OvcClassicTransaction(sdata[chunk:chunk + 0x30])
for sector in range(35, 39):
sdata = mfclassic_getsector(data, sector)[:-0x10]
for chunk in range(0, len(sdata), 0x20):
if ord(sdata[chunk]) == 0: continue
print OvcClassicTransaction(sdata[chunk:chunk + 0x20])