def flash_release(path=None, st_serial=None):
from panda import Panda, PandaDFU
from zipfile import ZipFile
def status(x):
print("\033[1;32;40m" + x + "\033[00m")
if st_serial is not None:
# look for Panda
panda_list = Panda.list()
if len(panda_list) == 0:
raise Exception(
"panda not found, make sure it's connected and your user can access it"
)
elif len(panda_list) > 1:
raise Exception("Please only connect one panda")
st_serial = panda_list[0]
print("Using panda with serial %s" % st_serial)
if path is not None:
print(
"Fetching latest firmware from github.com/commaai/panda-artifacts")
r = requests.get(
"https://raw.githubusercontent.com/commaai/panda-artifacts/master/latest.json"
)
url = json.loads(r.text)['url']
r = requests.get(url)
print("Fetching firmware from %s" % url)
path = io.StringIO(r.content)
zf = ZipFile(path)
zf.printdir()
version = zf.read("version")
status("0. Preparing to flash " + version)
code_bootstub = zf.read("bootstub.panda.bin")
code_panda = zf.read("panda.bin")
code_boot_15 = zf.read("boot_v1.5.bin")
code_boot_15 = code_boot_15[0:2] + "\x00\x30" + code_boot_15[4:]
# enter DFU mode
status("1. Entering DFU mode")
panda = Panda(st_serial)
panda.enter_bootloader()
time.sleep(1)
# program bootstub
status("2. Programming bootstub")
dfu = PandaDFU(PandaDFU.st_serial_to_dfu_serial(st_serial))
dfu.program_bootstub(code_bootstub)
time.sleep(1)
# flash main code
status("3. Flashing main code")
panda = Panda(st_serial)
panda.flash(code=code_panda)
panda.close()
# check for connection
status("4. Verifying version")
panda = Panda(st_serial)
my_version = panda.get_version()
print("dongle id: %s" % panda.get_serial()[0])
print(my_version, "should be", version)
assert (str(version) == str(my_version))
# done!
status("6. Success!")
def flash_release(path=None, st_serial=None):
from panda import Panda, PandaDFU, ESPROM, CesantaFlasher
from zipfile import ZipFile
def status(x):
print("\033[1;32;40m" + x + "\033[00m")
if st_serial == None:
# look for Panda
panda_list = Panda.list()
if len(panda_list) == 0:
raise Exception(
"panda not found, make sure it's connected and your user can access it"
)
elif len(panda_list) > 1:
raise Exception("Please only connect one panda")
st_serial = panda_list[0]
print("Using panda with serial %s" % st_serial)
if path == None:
print(
"Fetching latest firmware from github.com/commaai/panda-artifacts")
r = requests.get(
"https://raw.githubusercontent.com/commaai/panda-artifacts/master/latest.json"
)
url = json.loads(r.text)['url']
r = requests.get(url)
print("Fetching firmware from %s" % url)
path = io.StringIO(r.content)
zf = ZipFile(path)
zf.printdir()
version = zf.read("version")
status("0. Preparing to flash " + version)
code_bootstub = zf.read("bootstub.panda.bin")
code_panda = zf.read("panda.bin")
code_boot_15 = zf.read("boot_v1.5.bin")
code_boot_15 = code_boot_15[0:2] + "\x00\x30" + code_boot_15[4:]
code_user1 = zf.read("user1.bin")
code_user2 = zf.read("user2.bin")
# enter DFU mode
status("1. Entering DFU mode")
panda = Panda(st_serial)
panda.enter_bootloader()
time.sleep(1)
# program bootstub
status("2. Programming bootstub")
dfu = PandaDFU(PandaDFU.st_serial_to_dfu_serial(st_serial))
dfu.program_bootstub(code_bootstub)
time.sleep(1)
# flash main code
status("3. Flashing main code")
panda = Panda(st_serial)
panda.flash(code=code_panda)
panda.close()
# flashing ESP
if panda.is_white():
status("4. Flashing ESP (slow!)")
align = lambda x, sz=0x1000: x + "\xFF" * ((sz - len(x)) % sz)
esp = ESPROM(st_serial)
esp.connect()
flasher = CesantaFlasher(esp, 230400)
flasher.flash_write(0x0, align(code_boot_15), True)
flasher.flash_write(0x1000, align(code_user1), True)
flasher.flash_write(0x81000, align(code_user2), True)
flasher.flash_write(0x3FE000, "\xFF" * 0x1000)
flasher.boot_fw()
del flasher
del esp
time.sleep(1)
else:
status("4. No ESP in non-white panda")
# check for connection
status("5. Verifying version")
panda = Panda(st_serial)
my_version = panda.get_version()
print("dongle id: %s" % panda.get_serial()[0])
print(my_version, "should be", version)
assert (str(version) == str(my_version))
# done!
status("6. Success!")
def flash_release(path=None, st_serial=None):
from panda import Panda, PandaDFU, ESPROM, CesantaFlasher
from zipfile import ZipFile
def status(x):
print("\033[1;32;40m"+x+"\033[00m")
if st_serial == None:
# look for Panda
panda_list = Panda.list()
if len(panda_list) == 0:
raise Exception("panda not found, make sure it's connected and your user can access it")
elif len(panda_list) > 1:
raise Exception("Please only connect one panda")
st_serial = panda_list[0]
print("Using panda with serial %s" % st_serial)
if path == None:
print("Fetching latest firmware from github.com/commaai/panda-artifacts")
r = requests.get("https://raw.githubusercontent.com/commaai/panda-artifacts/master/latest.json")
url = json.loads(r.text)['url']
r = requests.get(url)
print("Fetching firmware from %s" % url)
path = StringIO.StringIO(r.content)
zf = ZipFile(path)
zf.printdir()
version = zf.read("version")
status("0. Preparing to flash "+version)
code_bootstub = zf.read("bootstub.panda.bin")
code_panda = zf.read("panda.bin")
code_boot_15 = zf.read("boot_v1.5.bin")
code_boot_15 = code_boot_15[0:2] + "\x00\x30" + code_boot_15[4:]
code_user1 = zf.read("user1.bin")
code_user2 = zf.read("user2.bin")
# enter DFU mode
status("1. Entering DFU mode")
panda = Panda(st_serial)
panda.enter_bootloader()
time.sleep(1)
# program bootstub
status("2. Programming bootstub")
dfu = PandaDFU(PandaDFU.st_serial_to_dfu_serial(st_serial))
dfu.program_bootstub(code_bootstub)
time.sleep(1)
# flash main code
status("3. Flashing main code")
panda = Panda(st_serial)
panda.flash(code=code_panda)
panda.close()
# flashing ESP
status("4. Flashing ESP (slow!)")
align = lambda x, sz=0x1000: x+"\xFF"*((sz-len(x)) % sz)
esp = ESPROM(st_serial)
esp.connect()
flasher = CesantaFlasher(esp, 230400)
flasher.flash_write(0x0, align(code_boot_15), True)
flasher.flash_write(0x1000, align(code_user1), True)
flasher.flash_write(0x81000, align(code_user2), True)
flasher.flash_write(0x3FE000, "\xFF"*0x1000)
flasher.boot_fw()
del flasher
del esp
time.sleep(1)
# check for connection
status("5. Verifying version")
panda = Panda(st_serial)
my_version = panda.get_version()
print("dongle id: %s" % panda.get_serial()[0])
print(my_version, "should be", version)
assert(str(version) == str(my_version))
# done!
status("6. Success!")