def SetTeardrops(hpercent=30, vpercent=70, segs=10, pcb=None):
"""Set teardrops on a teardrop free board"""
if pcb is None:
pcb = GetBoard()
vias = __GetAllVias(pcb)[0] + __GetAllPads(pcb, [PAD_ATTRIB_STANDARD])[0]
vias_selected = __GetAllVias(pcb)[1] +\
__GetAllPads(pcb, [PAD_ATTRIB_STANDARD])[1]
if len(vias_selected) > 0:
vias = vias_selected
teardrops = __GetAllTeardrops(pcb)
count = 0
for track in [t for t in pcb.GetTracks() if type(t) == TRACK]:
for via in [v for v in vias if track.IsPointOnEnds(v[0], v[1] / 2)]:
if (track.GetLength() < __TeardropLength(track, via, hpercent)) or\
(track.GetWidth() >= via[1] * vpercent / 100):
continue
found = False
if track.GetNetname() in teardrops.keys():
for teardrop in teardrops[track.GetNetname()]:
if __DoesTeardropBelongTo(teardrop, track, via):
found = True
break
if not found:
coor = __ComputePoints(track, via, hpercent, vpercent, segs)
pcb.Add(__Zone(pcb, coor, track))
count += 1
print('{0} teardrops inserted'.format(count))
return count
def SetTeardrops(hpercent=30,
vpercent=70,
segs=10,
pcb=None,
use_smd=False,
discard_in_same_zone=True):
"""Set teardrops on a teardrop free board"""
if pcb is None:
pcb = GetBoard()
pad_types = [PAD_ATTRIB_STANDARD] + [PAD_ATTRIB_SMD] * use_smd
vias = __GetAllVias(pcb)[0] + __GetAllPads(pcb, pad_types)[0]
vias_selected = __GetAllVias(pcb)[1] + __GetAllPads(pcb, pad_types)[1]
if len(vias_selected) > 0:
vias = vias_selected
teardrops = __GetAllTeardrops(pcb)
count = 0
for track in [t for t in pcb.GetTracks() if type(t) == TRACK]:
for via in [
v for v in vias if track.IsPointOnEnds(v[0], int(v[1] / 2))
]:
if (track.GetLength() < __TeardropLength(track, via, hpercent)) or\
(track.GetWidth() >= via[1] * vpercent / 100):
continue
found = False
if track.GetNetname() in teardrops.keys():
for teardrop in teardrops[track.GetNetname()]:
if __DoesTeardropBelongTo(teardrop, track, via):
found = True
break
# Discard case where pad and track are on different layers, or the pad have no copper at all (paste pads).
if (via[3] == "none"):
continue
if (via[3] == "front") and (not track.IsOnLayer(0)):
continue
if (via[3] == "back") and track.IsOnLayer(0):
continue
# Discard case where pad/via is within a zone with the same netname
# WARNING: this can severly reduce performances
if discard_in_same_zone and \
__IsViaAndTrackInSameNetZone(pcb, via, track):
continue
if not found:
coor = __ComputePoints(track, via, hpercent, vpercent, segs)
pcb.Add(__Zone(pcb, coor, track))
count += 1
RebuildAllZones(pcb)
print('{0} teardrops inserted'.format(count))
return count
def SetTeardrops(hpercent=30, vpercent=70, segs=10, pcb=None, use_smd=False):
"""Set teardrops on a teardrop free board"""
if pcb is None:
pcb = GetBoard()
pad_types = [PAD_ATTRIB_STANDARD] + [PAD_ATTRIB_SMD] * use_smd
vias = __GetAllVias(pcb)[0] + __GetAllPads(pcb, pad_types)[0]
vias_selected = __GetAllVias(pcb)[1] + __GetAllPads(pcb, pad_types)[1]
if len(vias_selected) > 0:
vias = vias_selected
teardrops = __GetAllTeardrops(pcb)
count = 0
for track in [t for t in pcb.GetTracks() if type(t) == TRACK]:
for via in [
v for v in vias if track.IsPointOnEnds(v[0], int(v[1] / 2))
]:
if (track.GetLength() < __TeardropLength(track, via, hpercent)) or\
(track.GetWidth() >= via[1] * vpercent / 100):
continue
found = False
if track.GetNetname() in teardrops.keys():
for teardrop in teardrops[track.GetNetname()]:
if __DoesTeardropBelongTo(teardrop, track, via):
found = True
break
# Discard case where pad and track are not on the same layer
if (via[3] == "front") and (not track.IsOnLayer(0)):
continue
if (via[3] == "back") and track.IsOnLayer(0):
continue
if not found:
coor = __ComputePoints(track, via, hpercent, vpercent, segs)
pcb.Add(__Zone(pcb, coor, track))
count += 1
RebuildAllZones(pcb)
print('{0} teardrops inserted'.format(count))
return count
def SetTeardrops(hpercent=50, vpercent=90, segs=10, pcb=None, use_smd=False,
discard_in_same_zone=True, follow_tracks=True):
"""Set teardrops on a teardrop free board"""
if pcb is None:
pcb = GetBoard()
pad_types = [PAD_ATTRIB_STANDARD] + [PAD_ATTRIB_SMD]*use_smd
vias = __GetAllVias(pcb)[0] + __GetAllPads(pcb, pad_types)[0]
vias_selected = __GetAllVias(pcb)[1] + __GetAllPads(pcb, pad_types)[1]
if len(vias_selected) > 0:
vias = vias_selected
trackLookup = {}
if follow_tracks:
for t in pcb.GetTracks():
if type(t) == TRACK:
net = t.GetNetname()
layer = t.GetLayer()
if layer not in trackLookup:
trackLookup[layer] = {}
if net not in trackLookup[layer]:
trackLookup[layer][net]=[]
trackLookup[layer][net].append(t)
teardrops = __GetAllTeardrops(pcb)
count = 0
for track in [t for t in pcb.GetTracks() if type(t)==TRACK]:
for via in [v for v in vias if track.IsPointOnEnds(v[0], int(v[1]/2))]:
if (track.GetWidth() >= via[1] * vpercent / 100):
continue
if track.IsPointOnEnds(via[0], int(via[1]/2))==STARTPOINT|ENDPOINT:
# both start and end are within the via
continue
found = False
if track.GetNetname() in teardrops.keys():
for teardrop in teardrops[track.GetNetname()]:
if __DoesTeardropBelongTo(teardrop, track, via):
found = True
break
# Discard case where pad and track are on different layers, or the
# pad have no copper at all (paste pads).
if (via[3] != -1) and (via[3] != track.GetLayer()):
continue
# Discard case where pad/via is within a zone with the same netname
# WARNING: this can severely reduce performance
if discard_in_same_zone and \
__IsViaAndTrackInSameNetZone(pcb, via, track):
continue
if not found:
coor = __ComputePoints(track, via, hpercent, vpercent, segs,
follow_tracks, trackLookup)
pcb.Add(__Zone(pcb, coor, track))
count += 1
RebuildAllZones(pcb)
print('{0} teardrops inserted'.format(count))
return count