def strip(
wg_width: float = 0.5,
layer: Layer = (1, 0),
layer_cladding: Layer = (111, 0),
radius: float = 10.0,
cladding_offset: float = 3.0,
euler_bend: bool = True,
wg_type: str = "strip",
) -> WaveguideTemplate:
"""
wg_type: strip, slot, and swg (subwavelength)
resist: Specifies the type of photoresist used (+ or -)
"""
return pc.WaveguideTemplate(
bend_radius=radius,
wg_width=wg_width,
wg_layer=layer[0],
wg_datatype=layer[1],
clad_layer=layer_cladding[0],
clad_datatype=layer_cladding[1],
clad_width=cladding_offset,
wg_type=wg_type,
euler_bend=euler_bend,
)
def wg_strip(
wg_width=0.5,
wg_layer=1,
wg_datatype=0,
clad_layer=2,
clad_datatype=0,
bend_radius=50,
):
return pc.WaveguideTemplate(
bend_radius=50.0,
wg_width=wg_width,
wg_layer=wg_layer,
wg_datatype=wg_datatype,
clad_layer=clad_layer,
clad_datatype=clad_datatype,
)
def wg_strip(
wg_width: float = 0.5,
wg_layer: int = LAYER.WG[0],
wg_datatype: int = LAYER.WG[1],
clad_layer: int = LAYER.WGCLAD[0],
clad_datatype: int = LAYER.WGCLAD[1],
bend_radius: int = 10,
clad_offset: int = 3,
) -> WaveguideTemplate:
return pc.WaveguideTemplate(
bend_radius=bend_radius,
wg_width=wg_width,
wg_layer=wg_layer,
wg_datatype=wg_datatype,
clad_layer=clad_layer,
clad_datatype=clad_datatype,
clad_width=clad_offset,
wg_type="strip",
)
def cross_section_to_waveguide_template(cross_section: CrossSectionFactory,
euler_bend: bool = True,
wg_type: str = "strip",
**kwargs) -> WaveguideTemplate:
x = cross_section(**kwargs)
layer = x.info["layer"]
layer_cladding = x.info["layers_cladding"][0]
return pc.WaveguideTemplate(
bend_radius=x.info["radius"],
wg_width=x.info["width"],
wg_layer=layer[0],
wg_datatype=layer[1],
clad_layer=layer_cladding[0],
clad_datatype=layer_cladding[1],
clad_width=x.info["cladding_offset"],
wg_type=wg_type,
euler_bend=euler_bend,
)
import gdspy
from picwriter import toolkit as tk
import picwriter.components as pc
top = gdspy.Cell("top")
top.add(gdspy.Rectangle((0, 0), (1000, 1000), layer=100, datatype=0))
wgt = pc.WaveguideTemplate(
wg_width=0.45,
clad_width=10.0,
bend_radius=100,
resist="+",
fab="ETCH",
wg_layer=1,
wg_datatype=0,
clad_layer=2,
clad_datatype=0,
)
wg = pc.Waveguide([(25, 25), (975, 25), (975, 500), (25, 500), (25, 975),
(975, 975)], wgt)
tk.add(top, wg)
tk.build_mask(top, wgt, final_layer=3, final_datatype=0)
gdspy.LayoutViewer()
gdspy.write_gds("tutorial.gds", unit=1.0e-6, precision=1.0e-9)
for port in po.portlist.keys():
port_loc = po.portlist[port]["port"]
direction = direction_to_degree(po.portlist[port]["direction"])
c.add_port(
name=port,
midpoint=[port_loc[0], port_loc[1]],
width=po.wgt.wg_width,
orientation=direction,
)
return c
if __name__ == "__main__":
wgt = pc.WaveguideTemplate(
bend_radius=50.0,
wg_width=1.0,
wg_layer=1,
wg_datatype=0,
clad_layer=2,
clad_datatype=0,
)
# gc = pc.GratingCoupler(wgt, port=(10, 20), direction=np.pi * 7 / 8)
gc = pc.GratingCoupler(wgt, port=(10, 20), direction=0.0)
gcc = picwriter2component(gc)
pp.show(gcc)
self.Nmax = Nmax
self.pas = pas
self.Nmax_ch = Nmax_ch
self.Taper_out = Taper_out
self.bend_radius = bend_radius
self.spiral_width = spiral_width
self.spiral_length = spiral_length
self.spiral_spacing = spiral_spacing
self.grating_focusing_distance = grating_focusing_distance
self.grating_length = grating_length
self.grating_width = grating_width
self.Taper_wg_Template = pc.WaveguideTemplate(
wg_width=self.Taper_out,
clad_width=1.0,
bend_radius=self.bend_radius,
resist='-',
fab='ETCH',
wg_layer=1,
wg_datatype=0,
clad_layer=2,
clad_datatype=0) #Waveguide template for the Taper extention
ch_width = []
spral_width = []
for i in range(self.Nmax):
# pas=self.pas if W_min+pas*i >=3 or W_min+pas*i <= 1.8 else 0.1
spral_width.append(np.around(W_min + pas * i, decimals=1))
self.wgt.append( \
pc.WaveguideTemplate(wg_width=np.around(W_min+pas*i,decimals=1), clad_width=1.0,
bend_radius=self.bend_radius,resist='-', fab='ETCH', wg_layer=1, wg_datatype=0, clad_layer=2,
clad_datatype=0))
for i in range(self.Nmax_ch):
ch_width.append(np.around(W_min_ch + pas_ch * i, decimals=1))
self.portlist["output_top"] = {
"port": self.output_port_top,
"direction": "EAST",
}
self.portlist["output_bot"] = {
"port": self.output_port_bot,
"direction": "EAST",
}
if __name__ == "__main__":
# from . import *
import picwriter.components as pc
top = gdspy.Cell("top")
wgt = pc.WaveguideTemplate(bend_radius=50, wg_width=0.5, resist="+")
# Values from Publication
spline_widths = [
0.5, 0.5, 0.6, 0.7, 0.9, 1.26, 1.4, 1.4, 1.4, 1.4, 1.31, 1.2, 1.2
]
ysplitter = SplineYSplitter(
wgt,
length=2,
widths=spline_widths,
taper_width=None,
taper_length=None,
output_length=10,
output_wg_sep=5,
output_width=0.5,
port=(0, 0),
