Python generate_pins 예제들, pinutils.generate_pins Python 예제들

예제 #1

0

파일 보기

def get_pins():
  pins = pinutils.generate_pins(0,31) # 32 General Purpose I/O Pins.
  pins = pinutils.generate_pins(0,31) # 32 General Purpose I/O Pins.
  pinutils.findpin(pins, "PD0", True)["functions"]["XL1"]=0;
  pinutils.findpin(pins, "PD1", True)["functions"]["XL2"]=0;
  pinutils.findpin(pins, "PD2", True)["functions"]["ADC1_IN0"]=0;
  pinutils.findpin(pins, "PD3", True)["functions"]["ADC1_IN1"]=0;
  pinutils.findpin(pins, "PD4", True)["functions"]["ADC1_IN2"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["ADC1_IN3"]=0;
  pinutils.findpin(pins, "PD9", True)["functions"]["NFC1"]=0;
  pinutils.findpin(pins, "PD10", True)["functions"]["NFC2"]=0;
  pinutils.findpin(pins, "PD26", True)["functions"]["USART1_TX"]=0;
  pinutils.findpin(pins, "PD27", True)["functions"]["USART1_RX"]=0;
  pinutils.findpin(pins, "PD28", True)["functions"]["ADC1_IN4"]=0;
  pinutils.findpin(pins, "PD29", True)["functions"]["ADC1_IN5"]=0;
  pinutils.findpin(pins, "PD30", True)["functions"]["ADC1_IN6"]=0;
  pinutils.findpin(pins, "PD31", True)["functions"]["ADC1_IN7"]=0;
  # Make buttons and LEDs negated
  pinutils.findpin(pins, "PD6", True)["functions"]["NEGATED"]=0;
  pinutils.findpin(pins, "PD7", True)["functions"]["NEGATED"]=0;

  # everything is non-5v tolerant
  for pin in pins:
    pin["functions"]["3.3"]=0;
  #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
  return pins

예제 #2

0

파일 보기

def get_pins():
  # 32 General Purpose I/O Pins, 16 'virtual' Port Expanded pins
  pins = pinutils.generate_pins(0,31,"D") + pinutils.generate_pins(0,15,"V");
  pinutils.findpin(pins, "PD0", True)["functions"]["XL1"]=0;
  pinutils.findpin(pins, "PD1", True)["functions"]["XL2"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["RTS"]=0;
  pinutils.findpin(pins, "PD6", True)["functions"]["TXD"]=0;
  pinutils.findpin(pins, "PD7", True)["functions"]["CTS"]=0;
  pinutils.findpin(pins, "PD8", True)["functions"]["RXD"]=0;
  pinutils.findpin(pins, "PD9", True)["functions"]["NFC1"]=0;
  pinutils.findpin(pins, "PD10", True)["functions"]["NFC2"]=0;
  pinutils.findpin(pins, "PD2", True)["functions"]["ADC1_IN0"]=0;
  pinutils.findpin(pins, "PD3", True)["functions"]["ADC1_IN1"]=0;
  pinutils.findpin(pins, "PD4", True)["functions"]["ADC1_IN2"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["ADC1_IN3"]=0;
  pinutils.findpin(pins, "PD28", True)["functions"]["ADC1_IN4"]=0;
  pinutils.findpin(pins, "PD29", True)["functions"]["ADC1_IN5"]=0;
  pinutils.findpin(pins, "PD30", True)["functions"]["ADC1_IN6"]=0;
  pinutils.findpin(pins, "PD31", True)["functions"]["ADC1_IN7"]=0;
  # Make buttons and LEDs negated
  pinutils.findpin(pins, "PD11", True)["functions"]["NEGATED"]=0;
  pinutils.findpin(pins, "PV5", True)["functions"]["NEGATED"]=0;
  pinutils.findpin(pins, "PV6", True)["functions"]["NEGATED"]=0;
  pinutils.findpin(pins, "PV7", True)["functions"]["NEGATED"]=0;


  # everything is non-5v tolerant
  for pin in pins:
    pin["functions"]["3.3"]=0;
  #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
  return pins

예제 #3

0

파일 보기

파일: ESP32.py 프로젝트: loboris/Espruino

def get_pins():

  pins = pinutils.generate_pins(0,19);

  pins.extend(pinutils.generate_pins(21,22));

  pins.extend(pinutils.generate_pins(25,27));

  pins.extend(pinutils.generate_pins(32,39));

  pinutils.findpin(pins, "PD36", True)["functions"]["ADC1_IN0"]=0;

  pinutils.findpin(pins, "PD37", True)["functions"]["ADC1_IN1"]=0;

  pinutils.findpin(pins, "PD38", True)["functions"]["ADC1_IN2"]=0;

  pinutils.findpin(pins, "PD39", True)["functions"]["ADC1_IN3"]=0;

  pinutils.findpin(pins, "PD32", True)["functions"]["ADC1_IN4"]=0;

  pinutils.findpin(pins, "PD33", True)["functions"]["ADC1_IN5"]=0;

  pinutils.findpin(pins, "PD34", True)["functions"]["ADC1_IN6"]=0;

  pinutils.findpin(pins, "PD35", True)["functions"]["ADC1_IN7"]=0;


  pinutils.findpin(pins, "PD4", True)["functions"]["ADC2_IN0"]=0;

  pinutils.findpin(pins, "PD0", True)["functions"]["ADC2_IN1"]=0;

  pinutils.findpin(pins, "PD2", True)["functions"]["ADC2_IN2"]=0;

  pinutils.findpin(pins, "PD15", True)["functions"]["ADC2_IN3"]=0;

  pinutils.findpin(pins, "PD13", True)["functions"]["ADC2_IN4"]=0;

  pinutils.findpin(pins, "PD12", True)["functions"]["ADC2_IN5"]=0;

  pinutils.findpin(pins, "PD14", True)["functions"]["ADC2_IN6"]=0;

  pinutils.findpin(pins, "PD27", True)["functions"]["ADC2_IN7"]=0;


  pinutils.findpin(pins, "PD0", True)["functions"]["LED_1"]=0;

  pinutils.findpin(pins, "PD10", True)["functions"]["USART0_TX"]=0;

  pinutils.findpin(pins, "PD17", True)["functions"]["USART2_TX"]=0;

  pinutils.findpin(pins, "PD32", True)["functions"]["USART0_RX"]=0;

  return pins

예제 #4

0

파일 보기

파일: NRF52832DK.py 프로젝트: plkumar/Espruino

def get_pins():
    pins = pinutils.generate_pins(0, 31)  # 32 General Purpose I/O Pins.
    pinutils.findpin(pins, "PD0", True)["functions"]["XL1"] = 0
    pinutils.findpin(pins, "PD1", True)["functions"]["XL2"] = 0
    pinutils.findpin(pins, "PD5", True)["functions"]["RTS"] = 0
    pinutils.findpin(pins, "PD6", True)["functions"]["TXD"] = 0
    pinutils.findpin(pins, "PD7", True)["functions"]["CTS"] = 0
    pinutils.findpin(pins, "PD8", True)["functions"]["RXD"] = 0
    pinutils.findpin(pins, "PD9", True)["functions"]["NFC1"] = 0
    pinutils.findpin(pins, "PD10", True)["functions"]["NFC2"] = 0
    pinutils.findpin(pins, "PD13", True)["functions"]["Button_1"] = 0
    pinutils.findpin(pins, "PD14", True)["functions"]["Button_2"] = 0
    pinutils.findpin(pins, "PD15", True)["functions"]["Button_3"] = 0
    pinutils.findpin(pins, "PD16", True)["functions"]["Button_4"] = 0
    pinutils.findpin(pins, "PD17", True)["functions"]["LED_1"] = 0
    pinutils.findpin(pins, "PD18", True)["functions"]["LED_2"] = 0
    pinutils.findpin(pins, "PD19", True)["functions"]["LED_3"] = 0
    pinutils.findpin(pins, "PD20", True)["functions"]["LED_4"] = 0
    pinutils.findpin(pins, "PD2", True)["functions"]["ADC1_IN0"] = 0
    pinutils.findpin(pins, "PD3", True)["functions"]["ADC1_IN1"] = 0
    pinutils.findpin(pins, "PD4", True)["functions"]["ADC1_IN2"] = 0
    pinutils.findpin(pins, "PD5", True)["functions"]["ADC1_IN3"] = 0
    pinutils.findpin(pins, "PD28", True)["functions"]["ADC1_IN4"] = 0
    pinutils.findpin(pins, "PD29", True)["functions"]["ADC1_IN5"] = 0
    pinutils.findpin(pins, "PD30", True)["functions"]["ADC1_IN6"] = 0
    pinutils.findpin(pins, "PD31", True)["functions"]["ADC1_IN7"] = 0
    #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
    return pins

예제 #5

0

파일 보기

def get_pins():
    pins = pinutils.generate_pins(0, 31)  # 32 General Purpose I/O Pins.
    pinutils.findpin(pins, "PD0", True)["functions"]["XL1"] = 0
    pinutils.findpin(pins, "PD1", True)["functions"]["XL2"] = 0
    pinutils.findpin(pins, "PD2", True)["functions"]["ADC1_IN0"] = 0
    pinutils.findpin(pins, "PD3", True)["functions"]["ADC1_IN1"] = 0
    pinutils.findpin(pins, "PD4", True)["functions"]["ADC1_IN2"] = 0
    pinutils.findpin(pins, "PD5", True)["functions"]["ADC1_IN3"] = 0
    pinutils.findpin(pins, "PD28", True)["functions"]["ADC1_IN4"] = 0
    pinutils.findpin(pins, "PD29", True)["functions"]["ADC1_IN5"] = 0
    pinutils.findpin(pins, "PD30", True)["functions"]["ADC1_IN6"] = 0
    pinutils.findpin(pins, "PD31", True)["functions"]["ADC1_IN7"] = 0
    # negate buttons
    pinutils.findpin(pins, "PD11", True)["functions"]["NEGATED"] = 0
    # btn
    pinutils.findpin(pins, "PD16", True)["functions"]["NEGATED"] = 0
    # btn
    pinutils.findpin(pins, "PD22", True)["functions"]["NEGATED"] = 0
    # btn
    pinutils.findpin(pins, "PD23", True)["functions"]["NEGATED"] = 0
    # btn
    pinutils.findpin(pins, "PD24", True)["functions"]["NEGATED"] = 0
    # btn

    # everything is non-5v tolerant
    for pin in pins:
        pin["functions"]["3.3"] = 0
    #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
    return pins

예제 #6

0

파일 보기

파일: NRF51822DK.py 프로젝트: zhmili/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,31) # 32 General Purpose I/O Pins.
  pinutils.findpin(pins, "PD27", True)["functions"]["XL1"]=0;
  pinutils.findpin(pins, "PD26", True)["functions"]["XL2"]=0;
  pinutils.findpin(pins, "PD8", True)["functions"]["RTS"]=0;
  pinutils.findpin(pins, "PD9", True)["functions"]["TXD"]=0;
  pinutils.findpin(pins, "PD10", True)["functions"]["CTS"]=0;
  pinutils.findpin(pins, "PD11", True)["functions"]["RXD"]=0;
  pinutils.findpin(pins, "PD17", True)["functions"]["Button_1"]=0;
  pinutils.findpin(pins, "PD18", True)["functions"]["Button_2"]=0;
  pinutils.findpin(pins, "PD19", True)["functions"]["Button_3"]=0;
  pinutils.findpin(pins, "PD20", True)["functions"]["Button_4"]=0;
  pinutils.findpin(pins, "PD21", True)["functions"]["LED_1"]=0;
  pinutils.findpin(pins, "PD22", True)["functions"]["LED_2"]=0;
  pinutils.findpin(pins, "PD23", True)["functions"]["LED_3"]=0;
  pinutils.findpin(pins, "PD24", True)["functions"]["LED_4"]=0;

  pinutils.findpin(pins, "PD0", True)["functions"]["ADC1_IN1"]=0;
  pinutils.findpin(pins, "PD1", True)["functions"]["ADC1_IN2"]=0;
  pinutils.findpin(pins, "PD2", True)["functions"]["ADC1_IN3"]=0;
  pinutils.findpin(pins, "PD3", True)["functions"]["ADC1_IN4"]=0;
  pinutils.findpin(pins, "PD4", True)["functions"]["ADC1_IN5"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["ADC1_IN6"]=0;
  pinutils.findpin(pins, "PD6", True)["functions"]["ADC1_IN7"]=0;
  # everything is non-5v tolerant
  for pin in pins:
    pin["functions"]["3.3"]=0;

  #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
  return pins

예제 #7

0

파일 보기

파일: NRF51822DK.py 프로젝트: amperka/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,31) # 32 General Purpose I/O Pins.
  pinutils.findpin(pins, "PD27", True)["functions"]["XL1"]=0;
  pinutils.findpin(pins, "PD26", True)["functions"]["XL2"]=0;
  pinutils.findpin(pins, "PD8", True)["functions"]["RTS"]=0;
  pinutils.findpin(pins, "PD9", True)["functions"]["TXD"]=0;
  pinutils.findpin(pins, "PD10", True)["functions"]["CTS"]=0;
  pinutils.findpin(pins, "PD11", True)["functions"]["RXD"]=0;
  pinutils.findpin(pins, "PD17", True)["functions"]["Button_1"]=0;
  pinutils.findpin(pins, "PD18", True)["functions"]["Button_2"]=0;
  pinutils.findpin(pins, "PD19", True)["functions"]["Button_3"]=0;
  pinutils.findpin(pins, "PD20", True)["functions"]["Button_4"]=0;
  pinutils.findpin(pins, "PD21", True)["functions"]["LED_1"]=0;
  pinutils.findpin(pins, "PD22", True)["functions"]["LED_2"]=0;
  pinutils.findpin(pins, "PD23", True)["functions"]["LED_3"]=0;
  pinutils.findpin(pins, "PD24", True)["functions"]["LED_4"]=0;

  pinutils.findpin(pins, "PD0", True)["functions"]["ADC1_IN1"]=0;
  pinutils.findpin(pins, "PD1", True)["functions"]["ADC1_IN2"]=0;
  pinutils.findpin(pins, "PD2", True)["functions"]["ADC1_IN3"]=0;
  pinutils.findpin(pins, "PD3", True)["functions"]["ADC1_IN4"]=0;
  pinutils.findpin(pins, "PD4", True)["functions"]["ADC1_IN5"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["ADC1_IN6"]=0;
  pinutils.findpin(pins, "PD6", True)["functions"]["ADC1_IN7"]=0;

  #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
  return pins

예제 #8

0

파일 보기

파일: SMARTIBOT.py 프로젝트: CWBudde/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,31) # 32 General Purpose I/O Pins.
  pinutils.findpin(pins, "PD0", True)["functions"]["XL1"]=0;
  pinutils.findpin(pins, "PD1", True)["functions"]["XL2"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["RTS"]=0;
  pinutils.findpin(pins, "PD22", True)["functions"]["TXD"]=0;
  pinutils.findpin(pins, "PD7", True)["functions"]["CTS"]=0;
  pinutils.findpin(pins, "PD23", True)["functions"]["RXD"]=0;
  pinutils.findpin(pins, "PD2", True)["functions"]["ADC1_IN0"]=0;
  pinutils.findpin(pins, "PD3", True)["functions"]["ADC1_IN1"]=0;
  pinutils.findpin(pins, "PD4", True)["functions"]["ADC1_IN2"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["ADC1_IN3"]=0;
  pinutils.findpin(pins, "PD28", True)["functions"]["ADC1_IN4"]=0;
  pinutils.findpin(pins, "PD29", True)["functions"]["ADC1_IN5"]=0;
  pinutils.findpin(pins, "PD30", True)["functions"]["ADC1_IN6"]=0;
  pinutils.findpin(pins, "PD31", True)["functions"]["ADC1_IN7"]=0;
  # Make BTN1 + BTN2 negated
  pinutils.findpin(pins, "PD29", True)["functions"]["NEGATED"]=0; # BTN1
  pinutils.findpin(pins, "PD13", True)["functions"]["NEGATED"]=0; # BTN2

  # everything is non-5v tolerant
  for pin in pins:
    pin["functions"]["3.3"]=0;
  #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
  return pins

예제 #9

0

파일 보기

def get_pins():
  pins = pinutils.generate_pins(0,31) # 32 General Purpose I/O Pins.
  pinutils.findpin(pins, "PD5", True)["functions"]["SPI1_SCK"]=0;
  pinutils.findpin(pins, "PD6", True)["functions"]["SPI1_MOSI"]=0;
  pinutils.findpin(pins, "PD7", True)["functions"]["I2C1_SCL"]=0;
  pinutils.findpin(pins, "PD8", True)["functions"]["I2C1_SDA"]=0;
#only 1 I2C available in Espruino
#  pinutils.findpin(pins, "PD13", True)["functions"]["I2C2_SCL"]=0;
#  pinutils.findpin(pins, "PD14", True)["functions"]["I2C2_SDA"]=0;
  pinutils.findpin(pins, "PD22", True)["functions"]["USART1_RX"]=0;
  pinutils.findpin(pins, "PD23", True)["functions"]["USART1_TX"]=0;
  pinutils.findpin(pins, "PD30", True)["functions"]["NEGATED"]=0; # button goes low when pressed, negate
# hardwired NRF52 analog inputs
  pinutils.findpin(pins, "PD2", True)["functions"]["ADC1_IN0"]=0;
  pinutils.findpin(pins, "PD3", True)["functions"]["ADC1_IN1"]=0;
  pinutils.findpin(pins, "PD4", True)["functions"]["ADC1_IN2"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["ADC1_IN3"]=0;
  pinutils.findpin(pins, "PD28", True)["functions"]["ADC1_IN4"]=0;
  pinutils.findpin(pins, "PD29", True)["functions"]["ADC1_IN5"]=0;
  pinutils.findpin(pins, "PD30", True)["functions"]["ADC1_IN6"]=0;
  pinutils.findpin(pins, "PD31", True)["functions"]["ADC1_IN7"]=0;
  # everything is non-5v tolerant
  for pin in pins:
    pin["functions"]["3.3"]=0;

  #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
  return pins

예제 #10

0

파일 보기

def get_pins():
    pins = pinutils.generate_pins(0, 31)  # 32 General Purpose I/O Pins.
    pinutils.findpin(pins, "PD0", True)["functions"]["XL1"] = 0
    pinutils.findpin(pins, "PD1", True)["functions"]["XL2"] = 0
    pinutils.findpin(pins, "PD9", True)["functions"]["NFC1"] = 0
    pinutils.findpin(pins, "PD10", True)["functions"]["NFC2"] = 0
    pinutils.findpin(pins, "PD2", True)["functions"]["ADC1_IN0"] = 0
    pinutils.findpin(pins, "PD2", True)["functions"]["3.3"] = 0
    pinutils.findpin(pins, "PD3", True)["functions"]["ADC1_IN1"] = 0
    pinutils.findpin(pins, "PD3", True)["functions"]["3.3"] = 0
    pinutils.findpin(pins, "PD4", True)["functions"]["ADC1_IN2"] = 0
    pinutils.findpin(pins, "PD4", True)["functions"]["3.3"] = 0
    pinutils.findpin(pins, "PD5", True)["functions"]["ADC1_IN3"] = 0
    pinutils.findpin(pins, "PD5", True)["functions"]["3.3"] = 0
    pinutils.findpin(pins, "PD28", True)["functions"]["ADC1_IN4"] = 0
    pinutils.findpin(pins, "PD28", True)["functions"]["3.3"] = 0
    pinutils.findpin(pins, "PD28", True)["functions"]["USART1_TX"] = 0
    pinutils.findpin(pins, "PD29", True)["functions"]["USART1_RX"] = 0
    pinutils.findpin(pins, "PD29", True)["functions"]["ADC1_IN5"] = 0
    pinutils.findpin(pins, "PD29", True)["functions"]["3.3"] = 0
    pinutils.findpin(pins, "PD30", True)["functions"]["ADC1_IN6"] = 0
    pinutils.findpin(pins, "PD30", True)["functions"]["3.3"] = 0
    pinutils.findpin(pins, "PD31", True)["functions"]["ADC1_IN7"] = 0
    pinutils.findpin(pins, "PD31", True)["functions"]["3.3"] = 0

    #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
    return pins

예제 #11

0

파일 보기

파일: RUUVITAG.py 프로젝트: CWBudde/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,31) # 32 General Purpose I/O Pins.
  pinutils.findpin(pins, "PD0", True)["functions"]["XL1"]=0;
  pinutils.findpin(pins, "PD1", True)["functions"]["XL2"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["RTS"]=0;
  pinutils.findpin(pins, "PD6", True)["functions"]["TXD"]=0;
  pinutils.findpin(pins, "PD7", True)["functions"]["CTS"]=0;
  pinutils.findpin(pins, "PD8", True)["functions"]["RXD"]=0;
  pinutils.findpin(pins, "PD9", True)["functions"]["NFC1"]=0;
  pinutils.findpin(pins, "PD10", True)["functions"]["NFC2"]=0;
  pinutils.findpin(pins, "PD2", True)["functions"]["ADC1_IN0"]=0;
  pinutils.findpin(pins, "PD3", True)["functions"]["ADC1_IN1"]=0;
  pinutils.findpin(pins, "PD4", True)["functions"]["ADC1_IN2"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["ADC1_IN3"]=0;
  pinutils.findpin(pins, "PD28", True)["functions"]["ADC1_IN4"]=0;
  pinutils.findpin(pins, "PD29", True)["functions"]["ADC1_IN5"]=0;
  pinutils.findpin(pins, "PD30", True)["functions"]["ADC1_IN6"]=0;
  pinutils.findpin(pins, "PD31", True)["functions"]["ADC1_IN7"]=0;
  # The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.

  # Make buttons and LEDs negated
  pinutils.findpin(pins, "PD17", True)["functions"]["NEGATED"]=0;
  pinutils.findpin(pins, "PD19", True)["functions"]["NEGATED"]=0;
  pinutils.findpin(pins, "PD13", True)["functions"]["NEGATED"]=0;
  
  return pins

예제 #12

0

파일 보기

def get_pins():
    pins = pinutils.generate_pins(0, 16)
    pinutils.findpin(pins, "PD0", True)["functions"]["LED_1"] = 0
    pinutils.findpin(pins, "PD1", True)["functions"]["USART0_TX"] = 0
    pinutils.findpin(pins, "PD2", True)["functions"]["USART1_TX"] = 0
    pinutils.findpin(pins, "PD3", True)["functions"]["USART0_RX"] = 0
    # just fake pins D0 .. D16
    return pins

예제 #13

0

파일 보기

파일: ESP8266_BOARD.py 프로젝트: olliephillips/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,15)
  pinutils.findpin(pins, "PD0", True)["functions"]["LED_1"]=0;
  pinutils.findpin(pins, "PD1", True)["functions"]["USART0_TX"]=0;
  pinutils.findpin(pins, "PD2", True)["functions"]["USART1_TX"]=0;
  pinutils.findpin(pins, "PD3", True)["functions"]["USART0_RX"]=0;
  # just fake pins D0 .. D15
  return pins

예제 #14

0

파일 보기

파일: ARDUINODUE.py 프로젝트: yaohantsai/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,69)
  pinutils.findpin(pins, "PD0", True)["functions"]["RXD"]=0;
  pinutils.findpin(pins, "PD1", True)["functions"]["TXD"]=0;
  pinutils.findpin(pins, "PD13", True)["functions"]["LED"]=0;
  # everything is non-5v tolerant
  for pin in pins:
    pin["functions"]["3.3"]=0;
  return pins

예제 #15

0

파일 보기

파일: UWATCH2.py 프로젝트: kabbi/espruino-uwatch

def get_pins():
    pins = pinutils.generate_pins(0, 31)  # 32 General Purpose I/O Pins.
    pinutils.findpin(pins, "PD0", True)["functions"]["XL1"] = 0
    pinutils.findpin(pins, "PD1", True)["functions"]["XL2"] = 0

    # everything is non-5v tolerant
    for pin in pins:
        pin["functions"]["3.3"] = 0

    return pins

예제 #16

0

파일 보기

def get_pins():
  pins = pinutils.generate_pins(0,14)
  pinutils.findpin(pins, "PD1", True)["functions"]["I2C_SDA"]=0;
  pinutils.findpin(pins, "PD2", True)["functions"]["I2C_SCK"]=0;
  pinutils.findpin(pins, "PD4", True)["functions"]["SPI1_SCK"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["SPI1_MOSI"]=0;
  pinutils.findpin(pins, "PD6", True)["functions"]["SPI1_MISO"]=0;
  pinutils.findpin(pins, "PD8", True)["functions"]["UART1_TX"]=0;
  pinutils.findpin(pins, "PD10", True)["functions"]["UART1_RX"]=0;

  return pins

예제 #17

0

파일 보기

파일: RASPBERRYPI.py 프로젝트: ticpu/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,31)
  pinutils.findpin(pins, "PD0", True)["functions"]["I2C1_SDA"]=0; # Rev 1
  pinutils.findpin(pins, "PD1", True)["functions"]["I2C1_SCL"]=0; # Rev 1
  pinutils.findpin(pins, "PD2", True)["functions"]["I2C1_SDA"]=0; # Rev 2
  pinutils.findpin(pins, "PD3", True)["functions"]["I2C1_SCL"]=0; # Rev 2
  pinutils.findpin(pins, "PD9", True)["functions"]["SPI1_MISO"]=0;
  pinutils.findpin(pins, "PD10", True)["functions"]["SPI1_MOSI"]=0;
  pinutils.findpin(pins, "PD11", True)["functions"]["SPI1_SCK"]=0;
  pinutils.findpin(pins, "PD14", True)["functions"]["UART1_TX"]=0;
  pinutils.findpin(pins, "PD15", True)["functions"]["UART1_RX"]=0;
  return pins

예제 #18

0

파일 보기

파일: RASPBERRYPI.py 프로젝트: 8bitgeek/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,31)  
  pinutils.findpin(pins, "PD0", True)["functions"]["I2C1_SDA"]=0; # Rev 1
  pinutils.findpin(pins, "PD1", True)["functions"]["I2C1_SCL"]=0; # Rev 1
  pinutils.findpin(pins, "PD2", True)["functions"]["I2C1_SDA"]=0; # Rev 2
  pinutils.findpin(pins, "PD3", True)["functions"]["I2C1_SCL"]=0; # Rev 2
  pinutils.findpin(pins, "PD9", True)["functions"]["SPI1_MISO"]=0;
  pinutils.findpin(pins, "PD10", True)["functions"]["SPI1_MOSI"]=0;
  pinutils.findpin(pins, "PD11", True)["functions"]["SPI1_SCK"]=0;
  pinutils.findpin(pins, "PD14", True)["functions"]["UART1_TX"]=0;
  pinutils.findpin(pins, "PD15", True)["functions"]["UART1_RX"]=0;
  return pins

예제 #19

0

파일 보기

파일: ESP32.py 프로젝트: etx/Espruino

def get_pins():


#  { "name":"PD20", "sortingname":"D20", "port":"D", "num":"30", "functions":{ "I2C1_SDA":0 }, "csv":{} },


#  pins = pinutils.generate_pins(0,5);
##6-11 are used by Flash chip
#  pins.extend(pinutils.generate_pins(12,23));

# pins.extend(pinutils.generate_pins(25,27));
##32-33 are routed to rtc for xtal
#  pins.extend(pinutils.generate_pins(34,39));

#  pins = pinutils.fill_gaps_in_pin_list(pins);

  pins = pinutils.generate_pins(0,39) # 40 General Purpose I/O Pins.

  pinutils.findpin(pins, "PD36", True)["functions"]["ADC1_IN0"]=0;
  pinutils.findpin(pins, "PD37", True)["functions"]["ADC1_IN1"]=0;
  pinutils.findpin(pins, "PD38", True)["functions"]["ADC1_IN2"]=0;
  pinutils.findpin(pins, "PD39", True)["functions"]["ADC1_IN3"]=0;
  pinutils.findpin(pins, "PD32", True)["functions"]["ADC1_IN4"]=0;
  pinutils.findpin(pins, "PD33", True)["functions"]["ADC1_IN5"]=0;
  pinutils.findpin(pins, "PD34", True)["functions"]["ADC1_IN6"]=0;
  pinutils.findpin(pins, "PD35", True)["functions"]["ADC1_IN7"]=0;

#ADC2 not supported yet, waiting for driver from espressif
  pinutils.findpin(pins, "PD4", True)["functions"]["ADC2_IN0"]=0;
  pinutils.findpin(pins, "PD0", True)["functions"]["ADC2_IN1"]=0;
  pinutils.findpin(pins, "PD2", True)["functions"]["ADC2_IN2"]=0;
  pinutils.findpin(pins, "PD15", True)["functions"]["ADC2_IN3"]=0;
  pinutils.findpin(pins, "PD13", True)["functions"]["ADC2_IN4"]=0;
  pinutils.findpin(pins, "PD12", True)["functions"]["ADC2_IN5"]=0;
  pinutils.findpin(pins, "PD14", True)["functions"]["ADC2_IN6"]=0;
  pinutils.findpin(pins, "PD27", True)["functions"]["ADC2_IN7"]=0;

  pinutils.findpin(pins, "PD25", True)["functions"]["DAC_OUT1"]=0;

  pinutils.findpin(pins, "PD26", True)["functions"]["DAC_OUT2"]=0;

  pinutils.findpin(pins, "PD0", True)["functions"]["LED_1"]=0;

  pinutils.findpin(pins, "PD10", True)["functions"]["USART0_TX"]=0;
  pinutils.findpin(pins, "PD16", True)["functions"]["USART2_RX"]=0;
  pinutils.findpin(pins, "PD17", True)["functions"]["USART2_TX"]=0;
  pinutils.findpin(pins, "PD32", True)["functions"]["USART0_RX"]=0;

  # everything is non-5v tolerant
  #for pin in pins:
  #  pin["functions"]["3.3"]=0;
  return pins

예제 #20

0

파일 보기

def get_pins():


#  { "name":"PD20", "sortingname":"D20", "port":"D", "num":"30", "functions":{ "I2C1_SDA":0 }, "csv":{} },


#  pins = pinutils.generate_pins(0,5);
##6-11 are used by Flash chip
#  pins.extend(pinutils.generate_pins(12,23));

# pins.extend(pinutils.generate_pins(25,27));
##32-33 are routed to rtc for xtal
#  pins.extend(pinutils.generate_pins(34,39));

#  pins = pinutils.fill_gaps_in_pin_list(pins);

  pins = pinutils.generate_pins(0,39) # 40 General Purpose I/O Pins.

  pinutils.findpin(pins, "PD36", True)["functions"]["ADC1_IN0"]=0;
  pinutils.findpin(pins, "PD37", True)["functions"]["ADC1_IN1"]=0;
  pinutils.findpin(pins, "PD38", True)["functions"]["ADC1_IN2"]=0;
  pinutils.findpin(pins, "PD39", True)["functions"]["ADC1_IN3"]=0;
  pinutils.findpin(pins, "PD32", True)["functions"]["ADC1_IN4"]=0;
  pinutils.findpin(pins, "PD33", True)["functions"]["ADC1_IN5"]=0;
  pinutils.findpin(pins, "PD34", True)["functions"]["ADC1_IN6"]=0;
  pinutils.findpin(pins, "PD35", True)["functions"]["ADC1_IN7"]=0;

#ADC2 not supported yet, waiting for driver from espressif
  pinutils.findpin(pins, "PD4", True)["functions"]["ADC2_IN0"]=0;
  pinutils.findpin(pins, "PD0", True)["functions"]["ADC2_IN1"]=0;
  pinutils.findpin(pins, "PD2", True)["functions"]["ADC2_IN2"]=0;
  pinutils.findpin(pins, "PD15", True)["functions"]["ADC2_IN3"]=0;
  pinutils.findpin(pins, "PD13", True)["functions"]["ADC2_IN4"]=0;
  pinutils.findpin(pins, "PD12", True)["functions"]["ADC2_IN5"]=0;
  pinutils.findpin(pins, "PD14", True)["functions"]["ADC2_IN6"]=0;
  pinutils.findpin(pins, "PD27", True)["functions"]["ADC2_IN7"]=0;

  pinutils.findpin(pins, "PD25", True)["functions"]["DAC_OUT1"]=0;

  pinutils.findpin(pins, "PD26", True)["functions"]["DAC_OUT2"]=0;

  pinutils.findpin(pins, "PD0", True)["functions"]["LED_1"]=0;

  pinutils.findpin(pins, "PD10", True)["functions"]["USART0_TX"]=0;
  pinutils.findpin(pins, "PD16", True)["functions"]["USART2_RX"]=0;
  pinutils.findpin(pins, "PD17", True)["functions"]["USART2_TX"]=0;
  pinutils.findpin(pins, "PD32", True)["functions"]["USART0_RX"]=0;

  # everything is non-5v tolerant
  #for pin in pins:
  #  pin["functions"]["3.3"]=0;
  return pins

예제 #21

0

파일 보기

def get_pins():
  pins = pinutils.generate_pins(0,47) # 48 General Purpose I/O Pins.
  pinutils.findpin(pins, "PD0", True)["functions"]["XL1"]=0;
  pinutils.findpin(pins, "PD1", True)["functions"]["XL2"]=0;
  pinutils.findpin(pins, "PD2", True)["functions"]["ADC1_IN0"]=0;
  pinutils.findpin(pins, "PD3", True)["functions"]["ADC1_IN1"]=0;
  pinutils.findpin(pins, "PD4", True)["functions"]["ADC1_IN2"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["ADC1_IN3"]=0;
  pinutils.findpin(pins, "PD28", True)["functions"]["ADC1_IN4"]=0;
  pinutils.findpin(pins, "PD29", True)["functions"]["ADC1_IN5"]=0;
  pinutils.findpin(pins, "PD30", True)["functions"]["ADC1_IN6"]=0;
  pinutils.findpin(pins, "PD31", True)["functions"]["ADC1_IN7"]=0;
  # Make buttons and LEDs negated
  pinutils.findpin(pins, "PD17", True)["functions"]["NEGATED"]=0; # button
  return pins

예제 #22

0

파일 보기

파일: ESP8266_12.py 프로젝트: shaworth/Espruino

def get_pins():
    pins = pinutils.generate_pins(0, 15)
    pinutils.findpin(pins, "PD0", True)["functions"]["LED_1"] = 0
    # PA0 is the analog input pin
    #pinutils.findpin(pins, "PA0", False)["functions"]["ADC"]=0;
    # PB16 is the RTC GPIO pin, also called GPIO16
    #pinutils.findpin(pins, "PB16", False)

    #for pin in pins:
    #  pin["functions"] = {
    #    "I2C1_SCL": "JSH_I2C1_SCL",
    #    "I2C1_SDA": "JSH_I2C1_SDA",
    #    "ADC": 0,
    #  }

    return pins

예제 #23

0

파일 보기

파일: ESP8266_12.py 프로젝트: RobinLin/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,15)
  pinutils.findpin(pins, "PD0", True)["functions"]["LED_1"]=0;
  # PA0 is the analog input pin
  #pinutils.findpin(pins, "PA0", False)["functions"]["ADC"]=0;
  # PB16 is the RTC GPIO pin, also called GPIO16
  #pinutils.findpin(pins, "PB16", False)

  #for pin in pins:
  #  pin["functions"] = {
  #    "I2C1_SCL": "JSH_I2C1_SCL",
  #    "I2C1_SDA": "JSH_I2C1_SDA",
  #    "ADC": 0,
  #  }

  return pins

예제 #24

0

파일 보기

def get_pins():
  pins = pinutils.generate_pins(0,31) # 32 General Purpose I/O Pins.
  pinutils.findpin(pins, "PD27", True)["functions"]["XL1"]=0;
  pinutils.findpin(pins, "PD26", True)["functions"]["XL2"]=0;
  pinutils.findpin(pins, "PD8", True)["functions"]["RTS"]=0;
  pinutils.findpin(pins, "PD9", True)["functions"]["TXD"]=0;
  pinutils.findpin(pins, "PD10", True)["functions"]["CTS"]=0;
  pinutils.findpin(pins, "PD11", True)["functions"]["RXD"]=0;
  pinutils.findpin(pins, "PD17", True)["functions"]["Button_1"]=0;
  pinutils.findpin(pins, "PD18", True)["functions"]["Button_2"]=0;
  pinutils.findpin(pins, "PD19", True)["functions"]["Button_3"]=0;
  pinutils.findpin(pins, "PD20", True)["functions"]["Button_4"]=0;
  pinutils.findpin(pins, "PD21", True)["functions"]["LED_1"]=0;
  pinutils.findpin(pins, "PD22", True)["functions"]["LED_2"]=0;
  pinutils.findpin(pins, "PD23", True)["functions"]["LED_3"]=0;
  pinutils.findpin(pins, "PD24", True)["functions"]["LED_4"]=0;
  #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
  return pins

예제 #25

0

파일 보기

def get_pins():
  pins = pinutils.generate_pins(0,31) # 32 General Purpose I/O Pins.
  pinutils.findpin(pins, "PD0", True)["functions"]["XL1"]=0;
  pinutils.findpin(pins, "PD1", True)["functions"]["XL2"]=0;
  pinutils.findpin(pins, "PD2", True)["functions"]["ADC1_IN0"]=0;
  pinutils.findpin(pins, "PD3", True)["functions"]["ADC1_IN1"]=0;
  pinutils.findpin(pins, "PD4", True)["functions"]["ADC1_IN2"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["ADC1_IN3"]=0;
  pinutils.findpin(pins, "PD28", True)["functions"]["ADC1_IN4"]=0;
  pinutils.findpin(pins, "PD29", True)["functions"]["ADC1_IN5"]=0;
  pinutils.findpin(pins, "PD30", True)["functions"]["ADC1_IN6"]=0;
  pinutils.findpin(pins, "PD31", True)["functions"]["ADC1_IN7"]=0;
  # negate buttons
  pinutils.findpin(pins, "PD11", True)["functions"]["NEGATED"]=0; # btn
  pinutils.findpin(pins, "PD16", True)["functions"]["NEGATED"]=0; # btn
  pinutils.findpin(pins, "PD22", True)["functions"]["NEGATED"]=0; # btn
  pinutils.findpin(pins, "PD23", True)["functions"]["NEGATED"]=0; # btn
  pinutils.findpin(pins, "PD24", True)["functions"]["NEGATED"]=0; # btn
  return pins

예제 #26

0

파일 보기

def get_pins():
    pins = pinutils.generate_pins(0, 39)  # 40 General Purpose I/O Pins.

    pinutils.findpin(pins, "PD39", True)["functions"]["NEGATED"] = 0
    # pins = [
    #   { "name":"PD19", "sortingname":"D19", "port":"D", "num":"19", "functions":{}, "csv":{} },
    #   { "name":"PD21", "sortingname":"D21", "port":"D", "num":"21", "functions":{}, "csv":{} },
    #   { "name":"PD22", "sortingname":"D22", "port":"D", "num":"22", "functions":{}, "csv":{} },
    #   { "name":"PD23", "sortingname":"D23", "port":"D", "num":"23", "functions":{}, "csv":{} },
    #   { "name":"PD25", "sortingname":"D25", "port":"D", "num":"25", "functions":{}, "csv":{} },
    #   { "name":"PD33", "sortingname":"D33", "port":"D", "num":"33", "functions":{}, "csv":{} },
    #   { "name":"PD39", "sortingname":"D39", "port":"D", "num":"39", "functions":{}, "csv":{} },
    # ];

    # everything is non-5v tolerant
    for pin in pins:
        pin["functions"]["3.3"] = 0

    return pins

예제 #27

0

파일 보기

파일: M5STICKC.py 프로젝트: parasquid/Espruino

def get_pins():
    # pins = [];
    pins = pinutils.generate_pins(0, 39)

    pinutils.findpin(pins, "PD10", False)["functions"]["NEGATED"] = 0
    pinutils.findpin(pins, "PD5", False)["functions"]["SPI1_CS"] = 0
    pinutils.findpin(pins, "PD8", False)["functions"]["TFT_RST"] = 0
    pinutils.findpin(pins, "PD13", False)["functions"]["SPI1_SCK"] = 0
    pinutils.findpin(pins, "PD15", False)["functions"]["SPI1_MOSI"] = 0
    pinutils.findpin(pins, "PD23", False)["functions"]["TFT_DC"] = 0
    pinutils.findpin(pins, "PD21", False)["functions"]["I2C1_SDA"] = 0
    pinutils.findpin(pins, "PD22", False)["functions"]["I2C1_SCL"] = 0
    pinutils.findpin(pins, "PD37", False)
    pinutils.findpin(pins, "PD39", False)

    # everything is non-5v tolerant
    for pin in pins:
        pin["functions"]["3.3"] = 0

    return pins

예제 #28

0

파일 보기

파일: RAK8212.py 프로젝트: CWBudde/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,31) # 32 General Purpose I/O Pins.
  # Software negation LED1
  pinutils.findpin(pins, "PD12", True)["functions"]["NEGATED"]=0;
  # Add pin functions
  pinutils.findpin(pins, "PD0", True)["functions"]["XL1"]=0;
  pinutils.findpin(pins, "PD1", True)["functions"]["XL2"]=0;
  pinutils.findpin(pins, "PD28", True)["functions"]["ADC1_IN4"]=0;
  pinutils.findpin(pins, "PD7", True)["functions"]["LTE_RX"]=0;
  pinutils.findpin(pins, "PD8", True)["functions"]["LTE_CTS"]=0;
  pinutils.findpin(pins, "PD9", True)["functions"]["LTE_TX"]=0;
  pinutils.findpin(pins, "PD10", True)["functions"]["LTE_RTS"]=0;
  pinutils.findpin(pins, "PD28", True)["functions"]["USART1_TX"]=0;
  pinutils.findpin(pins, "PD29", True)["functions"]["USART1_RX"]=0;
  pinutils.findpin(pins, "PD14", True)["functions"]["GPRS_RESET"]=0;
  pinutils.findpin(pins, "PD15", True)["functions"]["GPRS_PWRKEY"]=0;
  pinutils.findpin(pins, "PD6", True)["functions"]["GPRS_PWN_ON"]=0;
  pinutils.findpin(pins, "PD31", True)["functions"]["GPS_RESET"]=0;
  pinutils.findpin(pins, "PD2", True)["functions"]["BME_CS"]=0;
  pinutils.findpin(pins, "PD3", True)["functions"]["BME_SDI"]=0;
  pinutils.findpin(pins, "PD4", True)["functions"]["BME_SCK"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["BME_SDO"]=0;
  pinutils.findpin(pins, "PD11", True)["functions"]["LIS2MDL_SCL"]=0;
  pinutils.findpin(pins, "PD13", True)["functions"]["LIS2MDL_SDA"]=0;
  pinutils.findpin(pins, "PD16", True)["functions"]["LIS2MDL_INT"]=0;
  pinutils.findpin(pins, "PD18", True)["functions"]["LIS3DH_SCL"]=0;
  pinutils.findpin(pins, "PD19", True)["functions"]["LIS3DH_SDA"]=0;
  pinutils.findpin(pins, "PD25", True)["functions"]["LIS3DH_INT1"]=0;
  pinutils.findpin(pins, "PD27", True)["functions"]["LIS3DH_INT2"]=0;
  pinutils.findpin(pins, "PD26", True)["functions"]["OPT_SDA"]=0;
  pinutils.findpin(pins, "PD23", True)["functions"]["OPT_SCL"]=0;
  pinutils.findpin(pins, "PD22", True)["functions"]["OPT_INT"]=0;


  # everything is non-5v tolerant
  for pin in pins:
    pin["functions"]["3.3"]=0;

  #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
  return pins

예제 #29

0

파일 보기

파일: RAK8212.py 프로젝트: 408881465/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,31) # 32 General Purpose I/O Pins.
  # Software negation LED1
  pinutils.findpin(pins, "PD12", True)["functions"]["NEGATED"]=0;
  # Add pin functions
  pinutils.findpin(pins, "PD0", True)["functions"]["XL1"]=0;
  pinutils.findpin(pins, "PD1", True)["functions"]["XL2"]=0;
  pinutils.findpin(pins, "PD28", True)["functions"]["ADC1_IN4"]=0;
  pinutils.findpin(pins, "PD7", True)["functions"]["LTE_RX"]=0;
  pinutils.findpin(pins, "PD8", True)["functions"]["LTE_CTS"]=0;
  pinutils.findpin(pins, "PD9", True)["functions"]["LTE_TX"]=0;
  pinutils.findpin(pins, "PD10", True)["functions"]["LTE_RTS"]=0;
  pinutils.findpin(pins, "PD28", True)["functions"]["USART1_TX"]=0;
  pinutils.findpin(pins, "PD29", True)["functions"]["USART1_RX"]=0;
  pinutils.findpin(pins, "PD14", True)["functions"]["GPRS_RESET"]=0;
  pinutils.findpin(pins, "PD15", True)["functions"]["GPRS_PWRKEY"]=0;
  pinutils.findpin(pins, "PD6", True)["functions"]["GPRS_PWN_ON"]=0;
  pinutils.findpin(pins, "PD31", True)["functions"]["GPS_RESET"]=0;
  pinutils.findpin(pins, "PD2", True)["functions"]["BME_CS"]=0;
  pinutils.findpin(pins, "PD3", True)["functions"]["BME_SDI"]=0;
  pinutils.findpin(pins, "PD4", True)["functions"]["BME_SCK"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["BME_SDO"]=0;
  pinutils.findpin(pins, "PD11", True)["functions"]["LIS2MDL_SCL"]=0;
  pinutils.findpin(pins, "PD13", True)["functions"]["LIS2MDL_SDA"]=0;
  pinutils.findpin(pins, "PD16", True)["functions"]["LIS2MDL_INT"]=0;
  pinutils.findpin(pins, "PD18", True)["functions"]["LIS3DH_SCL"]=0;
  pinutils.findpin(pins, "PD19", True)["functions"]["LIS3DH_SDA"]=0;
  pinutils.findpin(pins, "PD25", True)["functions"]["LIS3DH_INT1"]=0;
  pinutils.findpin(pins, "PD27", True)["functions"]["LIS3DH_INT2"]=0;
  pinutils.findpin(pins, "PD26", True)["functions"]["OPT_SDA"]=0;
  pinutils.findpin(pins, "PD23", True)["functions"]["OPT_SCL"]=0;
  pinutils.findpin(pins, "PD22", True)["functions"]["OPT_INT"]=0;


  # everything is non-5v tolerant
  for pin in pins:
    pin["functions"]["3.3"]=0;

  #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
  return pins

예제 #30

0

파일 보기

파일: MDBT42Q.py 프로젝트: etx/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,31) # 32 General Purpose I/O Pins.
  pinutils.findpin(pins, "PD0", True)["functions"]["XL1"]=0;
  pinutils.findpin(pins, "PD1", True)["functions"]["XL2"]=0;
  pinutils.findpin(pins, "PD9", True)["functions"]["NFC1"]=0;
  pinutils.findpin(pins, "PD10", True)["functions"]["NFC2"]=0;
  pinutils.findpin(pins, "PD2", True)["functions"]["ADC1_IN0"]=0;
  pinutils.findpin(pins, "PD3", True)["functions"]["ADC1_IN1"]=0;
  pinutils.findpin(pins, "PD4", True)["functions"]["ADC1_IN2"]=0;
  pinutils.findpin(pins, "PD5", True)["functions"]["ADC1_IN3"]=0;
  pinutils.findpin(pins, "PD28", True)["functions"]["ADC1_IN4"]=0;
  pinutils.findpin(pins, "PD6", True)["functions"]["USART1_TX"]=0;
  pinutils.findpin(pins, "PD8", True)["functions"]["USART1_RX"]=0;
  pinutils.findpin(pins, "PD29", True)["functions"]["ADC1_IN5"]=0;
  pinutils.findpin(pins, "PD30", True)["functions"]["ADC1_IN6"]=0;
  pinutils.findpin(pins, "PD31", True)["functions"]["ADC1_IN7"]=0;
  # everything is non-5v tolerant
  for pin in pins:
    pin["functions"]["3.3"]=0;

  #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
  return pins

예제 #31

0

파일 보기

def get_pins():
    pins = pinutils.generate_pins(2, 127)
    pinutils.findpin(pins, "PD19", True)["functions"]["I2C2_SCL"] = 0
    pinutils.findpin(pins, "PD20", True)["functions"]["I2C2_SDA"] = 0
    return pins

예제 #32

0

파일 보기

파일: NRF51TAG.py 프로젝트: umissthestars/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,31) # 32 General Purpose I/O Pins.
  pinutils.findpin(pins, "PD27", True)["functions"]["XL1"]=0;
  pinutils.findpin(pins, "PD26", True)["functions"]["XL2"]=0;
  #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
  return pins

예제 #33

0

파일 보기

def get_pins():
  pins = pinutils.generate_pins(0,31) # 32 General Purpose I/O Pins.
  return pins

예제 #34

0

파일 보기

def get_pins():
    pins = pinutils.generate_pins(0, 31)  # 32 General Purpose I/O Pins.
    pinutils.findpin(pins, "PD27", True)["functions"]["XL1"] = 0
    pinutils.findpin(pins, "PD26", True)["functions"]["XL2"] = 0
    #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
    return pins

예제 #35

0

파일 보기

파일: ARIETTA_G25.py 프로젝트: paulusjacobus/Espruino

def get_pins():
    pins = pinutils.generate_pins(0, 31)
    pinutils.findpin(pins, "PD7", True)["functions"]["SPI1_SCK"] = 0
    pinutils.findpin(pins, "PD8", True)["functions"]["SPI1_MOSI"] = 0
    pinutils.findpin(pins, "PD10", True)["functions"]["SPI1_MISO"] = 0
    return pins

예제 #36

0

파일 보기

파일: DPTBOARD.py 프로젝트: etx/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,27)

  return pins

예제 #37

0

파일 보기

파일: ARIETTA_G25.py 프로젝트: etx/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,31)
  pinutils.findpin(pins, "PD7", True)["functions"]["SPI1_SCK"]=0;
  pinutils.findpin(pins, "PD8", True)["functions"]["SPI1_MOSI"]=0;
  pinutils.findpin(pins, "PD10", True)["functions"]["SPI1_MISO"]=0;
  return pins

예제 #38

0

파일 보기

파일: PAN1780.py 프로젝트: parasquid/Espruino

def get_pins():
    pins = pinutils.generate_pins(0, 47)  # 48 General Purpose I/O Pins.
    pinutils.findpin(pins, "PD0", True)["functions"]["XL1"] = 0
    # NC
    pinutils.findpin(pins, "PD1", True)["functions"]["XL2"] = 0
    # NC
    pinutils.findpin(pins, "PD2", True)["functions"]["ADC1_IN0"] = 0
    pinutils.findpin(pins, "PD3", True)["functions"]["ADC1_IN1"] = 0
    pinutils.findpin(pins, "PD4", True)["functions"]["ADC1_IN2"] = 0
    # NC
    pinutils.findpin(pins, "PD5", True)["functions"]["RTS"] = 0
    pinutils.findpin(pins, "PD6", True)["functions"]["TXD"] = 0
    pinutils.findpin(pins, "PD7", True)["functions"]["CTS"] = 0
    pinutils.findpin(pins, "PD8", True)["functions"]["RXD"] = 0
    pinutils.findpin(pins, "PD9", True)["functions"]["NFC1"] = 0
    pinutils.findpin(pins, "PD10", True)["functions"]["NFC2"] = 0
    pinutils.findpin(pins, "PD11", True)["functions"]["NEGATED"] = 0
    # BTN1
    pinutils.findpin(pins, "PD12", True)["functions"]["NEGATED"] = 0
    # BTN2
    pinutils.findpin(pins, "PD13", True)["functions"]["NEGATED"] = 0
    # LED1
    pinutils.findpin(pins, "PD14", True)["functions"]["NEGATED"] = 0
    # LED2
    pinutils.findpin(pins, "PD15", True)["functions"]["NEGATED"] = 0
    # LED3
    pinutils.findpin(pins, "PD16", True)["functions"]["NEGATED"] = 0
    # LED4
    #   pinutils.findpin(pins, "PD17", False)
    #   pinutils.findpin(pins, "PD18", False) # neopixel SCK # NC
    #   pinutils.findpin(pins, "PD19", False)
    #   pinutils.findpin(pins, "PD20", False)
    #   pinutils.findpin(pins, "PD21", False)
    #   pinutils.findpin(pins, "PD22", False)
    #   pinutils.findpin(pins, "PD23", False) # neopixel LRCK # NC
    #   pinutils.findpin(pins, "PD26", False)
    #   pinutils.findpin(pins, "PD27", False)
    pinutils.findpin(pins, "PD24", True)["functions"]["NEGATED"] = 0
    # BTN3
    pinutils.findpin(pins, "PD25", True)["functions"]["NEGATED"] = 0
    # BTN4
    pinutils.findpin(pins, "PD28", True)["functions"]["ADC1_IN4"] = 0
    pinutils.findpin(pins, "PD29", True)["functions"]["ADC1_IN5"] = 0
    pinutils.findpin(pins, "PD30", True)["functions"]["ADC1_IN6"] = 0
    pinutils.findpin(pins, "PD31", True)["functions"]["ADC1_IN7"] = 0
    #   pinutils.findpin(pins, "PD32", False) # 1.00 # NC
    #   pinutils.findpin(pins, "PD33", False) # 1.01
    #   pinutils.findpin(pins, "PD34", False) # 1.02
    #   pinutils.findpin(pins, "PD35", False) # 1.03 # NC
    #   pinutils.findpin(pins, "PD36", False) # 1.04 # NC
    #   pinutils.findpin(pins, "PD37", False) # 1.05 # NC
    #   pinutils.findpin(pins, "PD38", False) # 1.06 # NC
    #   pinutils.findpin(pins, "PD39", False) # 1.07 # NC
    #   pinutils.findpin(pins, "PD40", False) # 1.08 # NC
    #   pinutils.findpin(pins, "PD41", False) # 1.09 # NC
    #   pinutils.findpin(pins, "PD42", False) # 1.10 # NC
    #   pinutils.findpin(pins, "PD43", False) # 1.11 # NC
    #   pinutils.findpin(pins, "PD44", False) # 1.12
    #   pinutils.findpin(pins, "PD45", False) # 1.13
    #   pinutils.findpin(pins, "PD46", False) # 1.14
    #   pinutils.findpin(pins, "PD47", False) # 1.15

    # everything is non-5v tolerant
    for pin in pins:
        pin["functions"]["3.3"] = 0
    #The boot/reset button will function as a reset button in normal operation. Pin reset on PD21 needs to be enabled on the nRF52832 device for this to work.
    return pins

예제 #39

0

파일 보기

파일: LINUX.py 프로젝트: CWBudde/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,32)
  # just fake pins D0 .. D32
  return pins

예제 #40

0

파일 보기

파일: BEAGLEBONE_BLACK.py 프로젝트: AkosLukacs/Espruino

def get_pins():
    pins = pinutils.generate_pins(2, 127)
    pinutils.findpin(pins, "PD19", True)["functions"]["I2C2_SCL"] = 0
    pinutils.findpin(pins, "PD20", True)["functions"]["I2C2_SDA"] = 0
    return pins

예제 #41

0

파일 보기

def get_pins():
    pins = pinutils.generate_pins(0, 27)

    return pins

예제 #42

0

파일 보기

파일: ESP8266_OTA.py 프로젝트: impressiver/Espruino

def get_pins():
  pins = pinutils.generate_pins(0,15)
  # just fake pins D0 .. D15
  return pins

예제 #43

0

파일 보기

def get_pins():
  pins = pinutils.generate_pins(0,32)
  # just fake pins D0 .. D32
  return pins