def pathfind(lat1, long1, lat2, long2):
# HERE api limits number of exclusion zones to 20, therefore we have to take extra steps to figure out which
# zones we are to give to the api. If more than 20 exclusion zones are in the database, this is done by first
# getting the naive path from the Google Maps API, adding only the zones which intersect with the path, and
# then getting a path which avoides these zones. This does not guarentee that the path will be free of exclusion
# zones, but its the best we can do with these APIs.
hdata = hmapalgo(full=True)
if len(db) < 20:
return polyline.encode(here_get_path(lat1, long1, lat2, long2, hdata))
else:
naive_path = google_maps_get_path(lat1, long1, lat2, long2)
intersections = get_intersections(naive_path, hdata)
return polyline.encode(here_get_path(lat1, long1, lat2, long2, intersections))
def test_encode_official_example_precision(self):
e = polyline.encode([
(38.500, -120.200),
(40.700, -120.950),
(43.252, -126.453)
], 6)
self.assertEqual(e, '_izlhA~rlgdF_{geC~ywl@_kwzCn`{nI')
def initialize_sim(fid, timestamp, lat, lon):
coords = polyline.encode([(lat, lon)], 5)
wind_x, wind_y = get_wind(lat, lon)
try:
# Make a request to the ForeFire API
requests.post(
"http://forefire.univ-corse.fr/api/dev/php/forefireAPI.php",
data={
'command': 'init',
'path': fid,
'coords': coords,
'ventX': wind_x,
'ventY': wind_y,
'date': timestamp.strftime('%Y-%m-%dT%H:%M:%SZ')
},
headers={'X-Requested-With': 'XMLHttpRequest'},
timeout=1)
except requests.exceptions.ReadTimeout:
# Request does not return something, so wait for timeout before continuing
print("Fire simulation was initialized correctly.")
# Compute the number of cycles from fire ignition until now
t_diff = datetime.now() - timestamp
n_cycles = math.floor(t_diff.total_seconds() / 1200)
# Run a propagation of the simulator and return shape
return propagate_sim(fid, n_cycles)
except requests.exceptions.ConnectionError:
print("Server cannot be reached.")
return None
def decode():
if (request.method == 'POST'):
text = request.form['textboxid']
if (',' in text):
text = text.strip()
if (';' in text):
latlongs = text.split(';')
else:
latlongs = text.split()
arr = []
for i in latlongs:
k = i.split(',')
arr.append([float(k[0]), float(k[1])])
poly = polyline.encode(arr)
return render_template("displayPolyline.html", poly=poly)
else:
poly = text.strip()
try:
pings = polyline.decode(poly)
latlongs = []
for i in pings:
latlongs.append(str(i[0]) + "," + str(i[1]))
except:
latlongs = ["Polyline inaccurate"]
return render_template("displayLatlongs.html", latlongs=latlongs)
else:
return render_template("home.html")
def _get_route_with_elevation_helper(gps_a, gps_b):
"""
returns a list of points where each point is a list with
lon, lat and altitude (in meters)
"""
route = get_route(gps_a, gps_b)
if route == None:
return None
encoded_route = polyline.encode(route, geojson=True)
body = {"format_in": "encodedpolyline", "geometry": encoded_route}
headers = {
'Accept':
'application/json, application/geo+json, application/gpx+xml, img/png; charset=utf-8',
'Authorization': API_KEY,
'Content-Type': 'application/json; charset=utf-8'
}
call = requests.post('https://api.openrouteservice.org/elevation/line',
json=body,
headers=headers)
result = json.loads(call.text)
if not 'geometry' in result:
print(result)
return None
return result['geometry']['coordinates']
def _generate_requests_for_non_simplified_network(n, osm_tags=all):
"""
Generates a dictionary describing pairs of nodes for which we need to request
directions from Google directions API. For a non-simplified network n
:param n: genet.Network
:param osm_tags: takes a list of OSM tags to subset the network on, e.g. ['primary', 'secondary', 'tertiary']
:return:
"""
if osm_tags == all:
g = n.modal_subgraph(modes='car')
else:
g = n.subgraph_on_link_conditions(
conditions=[
{'attributes': {'osm:way:highway': {'text': osm_tags}}},
{'modes': 'car'}],
how=all,
mixed_dtypes=True)
simple_paths = simplification._get_edge_groups_to_simplify(g)
node_diff = set(g.nodes) - set(itertools.chain.from_iterable(simple_paths))
non_simplified_edges = set(g.out_edges(node_diff)) | set(g.in_edges(node_diff))
all_paths = list(non_simplified_edges) + simple_paths
api_requests = {}
for path in all_paths:
request_nodes = (path[0], path[-1])
api_requests[request_nodes] = {
'path_nodes': path,
'path_polyline': polyline.encode([(n.node(node)['lat'], n.node(node)['lon']) for node in path]),
'origin': n.node(request_nodes[0]),
'destination': n.node(request_nodes[1])
}
return api_requests
def get_altitudes():
rounded_coords = set()
lat_gain, lon_gain = get_gains()
for map_row, lat in enumerate(
float_range(config.MAP_START[0], config.MAP_END[0], lat_gain)):
row_start_lon = config.MAP_START[1]
odd = map_row % 2 != 0
if odd:
row_start_lon -= 0.5 * lon_gain
for map_col, lon in enumerate(
float_range(row_start_lon, config.MAP_END[1], lon_gain)):
rounded_coords.add((round(lat, 2), round(lon, 2)))
altitudes = dict()
try:
params = {'locations': 'enc:' + polyline.encode(tuple(rounded_coords))}
if hasattr(config, 'GOOGLE_MAPS_KEY'):
params['key'] = config.GOOGLE_MAPS_KEY
r = requests.get('https://maps.googleapis.com/maps/api/elevation/json',
params=params).json()
for result in r['results']:
coords = (round(result['location']['lat'],
2), round(result['location']['lng'], 2))
altitudes[coords] = result['elevation']
except Exception:
for coord in rounded_coords:
if hasattr(config, 'ALT_RANGE'):
altitudes[coord] = random.uniform(*config.ALT_RANGE)
else:
altitudes[coord] = random.uniform(300, 400)
return altitudes
def test_encode_official_example(self):
e = polyline.encode([
(38.500, -120.200),
(40.700, -120.950),
(43.252, -126.453)
])
self.assertEqual(e, '_p~iF~ps|U_ulLnnqC_mqNvxq`@')
def get_altitudes(coords, precision=3):
def chunks(l, n):
"""Yield successive n-sized chunks from l."""
for i in range(0, len(l), n):
yield l[i:i + n]
altitudes = dict()
if len(coords) > 300:
for chunk in tuple(chunks(coords, 300)):
altitudes.update(get_altitudes(chunk, precision))
else:
try:
params = {'locations': 'enc:' + polyline.encode(coords)}
if config.GOOGLE_MAPS_KEY:
params['key'] = config.GOOGLE_MAPS_KEY
r = requests.get('https://maps.googleapis.com/maps/api/elevation/json',
params=params).json()
for result in r['results']:
point = (result['location']['lat'], result['location']['lng'])
key = round_coords(point, precision)
altitudes[key] = result['elevation']
except Exception:
pass
return altitudes
def encode_dataset_polyline(data):
"""get coordinates and encode polyline"""
coordinates = ()
directions = []
for directions in data:
direct_poly = []
for line in directions['path']:
coordinates = (float(line['lat']), float(line['lon']))
direct_poly.append(coordinates)
# add polyline in format of 'main.decodePolylines(directions)'
directions.update({'overview_polyline': {'points': polyline.encode(direct_poly, 5)}})
try:
data[0]['path'][0]['filename']
except:
try:
data[0]['path'][0]['filename'] = 'unknown_filename'
except:
print("No paths were found. Exiting...")
exit(1)
iowork.save_temp_data(data,'ds_polyline_' + data[0]['path'][0]['filename'])
print("Polyline of dataset directions is encoded and saved")
return data
async def get_elevation_for_points(settings, points):
n = 200
result = []
async with aiohttp.ClientSession() as session:
for i in range(0, len(points), n):
section_points = points[i:i + n]
section_polyline = polyline.encode([(round(point.lat,
6), round(point.lng, 6))
for point in section_points])
r = await session.get(
'https://maps.googleapis.com/maps/api/elevation/json',
params={
'sensor': 'false',
'key': settings['google_api_key'],
'locations': "enc:{}".format(section_polyline)
})
elevations = await r.json()
if elevations['status'] != 'OK':
logging.error(elevations)
else:
result.extend(
(elv['elevation'] for elv in elevations['results']))
return result
def recalculateRouteStats():
collection = db.cleanerRoutes
allRoutes = list(collection.find())
i = 0
for route in allRoutes:
coorList = []
totalkm = 0.00
j = 1
for datapoint in route['route']:
coorList.append([
float(datapoint['coordinates']['latitude']),
float(datapoint['coordinates']['longitude'])
])
if j == len(route['route']) - 1:
break
totalkm += calcDistance(datapoint['coordinates'],
route['route'][j]['coordinates'], 1)
j += 1
lineString = polyline.encode(coorList)
route['lineString'] = lineString
startDate = int(float(route['route'][0]['timestamp']))
endDate = int(
float(route['route'][len(route['route']) - 1]['timestamp']))
route['startDatetime'] = startDate
route['endDatetime'] = endDate
route['distance_inkm'] = "%.2f" % totalkm
#print route['distance_inkm']
i += 1
collection = db.cleanestRoutes
collection.insert(allRoutes)
def generate_requests(n):
"""
Generates two dictionaries, both of them have keys that describe a pair of nodes for which we need to request
directions from Google directions API
:param n: genet.Network
:return:
"""
g = n.modal_subgraph(modes='car')
simple_paths = list(ox.simplification._get_paths_to_simplify(g))
node_diff = set(g.nodes) - set(itertools.chain.from_iterable(simple_paths))
non_simplified_edges = set(g.out_edges(node_diff)) | set(
g.in_edges(node_diff))
all_paths = list(non_simplified_edges) + simple_paths
api_requests = {}
for path in all_paths:
request_nodes = (path[0], path[-1])
api_requests[request_nodes] = {
'path_nodes':
path,
'path_polyline':
polyline.encode([(n.node(node)['lat'], n.node(node)['lon'])
for node in path]),
'origin':
n.node(request_nodes[0]),
'destination':
n.node(request_nodes[1])
}
return api_requests
def encode_polyline_list(self) -> list:
"""
Not used now. https://developers.google.com/maps/documentation/elevation/overview#Locations
:return:
"""
en = polyline.encode(self.coords_list(), 5, geojson=True)
# print(en)
return en
def test_encode_multiple_points(self):
e = polyline.encode([(40.641, -8.654), (40.641, -8.654),
(40.641, -8.656), (40.642, -8.656),
(40.642, -8.655), (40.642, -8.655),
(40.642, -8.655), (40.642, -8.653),
(40.642, -8.653), (40.642, -8.653),
(40.641, -8.653), (40.641, -8.654)])
self.assertEqual(e, 'gu`wFnfys@???nKgE??gE?????oK????fE??fE')
def test_encode_multiple_points_precision(self):
e = polyline.encode([(40.641, -8.654), (40.641, -8.654),
(40.641, -8.656), (40.642, -8.656),
(40.642, -8.655), (40.642, -8.655),
(40.642, -8.655), (40.642, -8.653),
(40.642, -8.653), (40.642, -8.653),
(40.641, -8.653), (40.641, -8.654)], 6)
self.assertEqual(e, 'o}oolA~ieoO???~{Bo}@??o}@?????_|B????n}@??n}@')
def get_elevation_data(lat_lon_coords, **elvtn_args):
key = 'AIzaSyCeoTnfT0MwM8M2sU9amxCZUBxr1Fn_RSQ'
path_segments = []
elevation_results = []
df_route = pd.DataFrame(columns=['Lat', 'Lon', 'Elv'])
#count = 0
for chunk in chunks(lat_lon_coords, 512):
path_segments.append(chunk)
path_string = ''
for segments in path_segments:
#print("outer loop")
for lat, lon in segments:
path_string = path_string + str(lat) + ',' + str(lon) + '|'
#print("inner Loop")
path_string = path_string[0:-1]
elvtn_args.update({
'path': path_string,
'samples': str(1),
})
"""Change out all characters to be encoded with %s"""
#Is there any way to request less data?
#Polyline encode is lossless, change 5 to lower number?
url = ELEVATION_BASE_URL + polyline.encode(chunk, 5) + '&key=' + key
#count += 1
#print(count)
# print(url)
#Downloads each segment of the route one at a time, takes a long time
#print("start Download")
response = simplejson.load(urllib.request.urlopen(url))
#print("stop Download")
# caution will spam terminal
#print(response)
# Create a dictionary for each results[] object
#Only writes elevation to elevation results apparently discards other data.
elevation_result = []
for resultset in response['results']:
#print(response['results'])
#print(resultset['elevation'])
elevation_result.append(resultset['elevation'])
elevation_results.append(elevation_result)
# print(elevation_results)
i = 0
for segment_id, segments in enumerate(path_segments):
j = 0
for lat, lon in segments:
df_route.loc[i] = pd.Series({
'Lat': lat,
'Lon': lon,
'Elv': elevation_results[segment_id][j]
})
j += 1
i += 1
return df_route
def parse_raw_data_to_nametuple(self, run_data, old_gpx_ids, with_gpx=False):
run_data = run_data["runrecord"]
joyrun_id = run_data["fid"]
start_time = run_data["starttime"]
end_time = run_data["endtime"]
run_points_data = self.parse_content_to_ponits(run_data["content"])
if with_gpx:
# pass the track no points
if run_points_data:
gpx_data = self.parse_points_to_gpx(
run_points_data, start_time, end_time
)
download_joyrun_gpx(gpx_data, str(joyrun_id))
heart_rate_list = eval(run_data["heartrate"]) if run_data["heartrate"] else None
heart_rate = None
if heart_rate_list:
heart_rate = int(sum(heart_rate_list) / len(heart_rate_list))
# fix #66
if heart_rate < 0:
heart_rate = None
polyline_str = polyline.encode(run_points_data) if run_points_data else ""
start_latlng = start_point(*run_points_data[0]) if run_points_data else None
start_date = datetime.utcfromtimestamp(start_time)
start_date_local = adjust_time(start_date, "Asia/Shanghai")
end = datetime.utcfromtimestamp(end_time)
# only for China now
end_local = adjust_time(end, "Asia/Shanghai")
location_country = None
# joyrun location is kind of f*****g strage, so I decide not use it, if you want use it, uncomment this two lines
# if run_data["city"] or run_data["province"]:
# location_country = str(run_data["city"]) + " " + str(run_data["province"])
d = {
"id": int(joyrun_id),
"name": "run from joyrun",
# future to support others workout now only for run
"type": "Run",
"start_date": datetime.strftime(start_date, "%Y-%m-%d %H:%M:%S"),
"end": datetime.strftime(end, "%Y-%m-%d %H:%M:%S"),
"start_date_local": datetime.strftime(
start_date_local, "%Y-%m-%d %H:%M:%S"
),
"end_local": datetime.strftime(end_local, "%Y-%m-%d %H:%M:%S"),
"length": run_data["meter"],
"average_heartrate": heart_rate,
"map": run_map(polyline_str),
"start_latlng": start_latlng,
"distance": run_data["meter"],
"moving_time": timedelta(seconds=run_data["second"]),
"elapsed_time": timedelta(
seconds=int((run_data["endtime"] - run_data["starttime"]))
),
"average_speed": run_data["meter"] / run_data["second"],
"location_country": location_country,
"source": "Joyrun",
}
return namedtuple("x", d.keys())(*d.values())
def direction(r):
global pathline
global window
global userInput2
global endDes
window = tkinter.Toplevel()
window.config(background="#cfe3fc")
window.title("Directions")
dist = (r['routes'][0]['distance']) / 1609.344 #in meters
dura = (r['routes'][0]['duration']) / 60 #in seconds
if r['waypoints'][0]['name'] == '':
start = userInput2.get()
else:
start = r['waypoints'][0]['name']
if r['waypoints'][1]['name'] == '':
end = endDes
else:
end = r['waypoints'][1]['name']
label = tkinter.Label(window,
background="#cfe3fc",
text=f'Distance: {dist:.2f} miles away')
label.grid(sticky="W")
label1 = tkinter.Label(window,
background="#cfe3fc",
text=f'Duration: {dura:.0f} minutes away')
label1.grid(sticky="W")
label2 = tkinter.Label(
window, background="#cfe3fc",
text=f'Start Location: {start}') #starting street name
label2.grid(sticky="W")
label3 = tkinter.Label(window,
background="#cfe3fc",
text=f'End Location: {end}') #ending street name
label3.grid(sticky="W")
label4 = tkinter.Label(window, background="#cfe3fc", text="Directions:")
label4.grid(sticky="W")
ct = 0
steps = r['routes'][0]['legs'][0]['steps']
for s in range(len(steps)):
ct += 1
label5 = tkinter.Label(
window,
background="#cfe3fc",
text=f"Step {str(ct)}: {steps[s]['maneuver']['instruction']}")
label5.grid(sticky="W")
plst = []
dire = r['routes'][0]['legs'][0]['steps']
#list of directions coordinates
for d in range(len(dire)):
plst.append(tuple(dire[d]["maneuver"]["location"]))
#Create a polyline of the direction to display on a map later on
pathline = polyline.encode(plst, geojson=True)
def list_properties_rightmove(latitude,
longitude,
radius,
min_bedrooms,
min_bathrooms,
min_price=0,
max_price=0):
(lat_min, lon_min, lat_max, lon_max) = boundingBox(latitude, longitude,
radius)
box = [(lat_min, lon_min), (lat_min, lon_max), (lat_max, lon_max),
(lat_max, lon_min), (lat_min, lon_min)]
new_home = True
payload = {
'apiApplication':
'ANDROID',
'locationIdentifier':
'USERDEFINEDAREA^' + json.dumps({"polylines": polyline.encode(box)}),
'minBedrooms':
min_bedrooms
}
if max_price:
payload['maxPrice'] = max_price
if min_price:
payload['minPrice'] = min_price
if new_home:
payload['newHome'] = "true"
r = requests.get('http://api.rightmove.co.uk/api/sale/find',
params=payload,
proxies=proxies)
for listing in r.json()["properties"]:
yield {
"id":
str(listing["identifier"]),
"latitude":
listing['latitude'],
"longitude":
listing['longitude'],
"price":
int(listing['price']),
"url":
"http://www.rightmove.co.uk/property-for-sale/property-%d.html" %
(listing['identifier']),
"description":
listing['summary'],
"address":
listing['address'],
"image":
listing['photoThumbnailUrl'],
"floor_plans": [],
"new_home":
new_home
}
def convert_to_polyline(self, index):
gpx = self.get_gpx(index)
track_segment = gpx.track.track_segment
if (len(track_segment)):
line = [(obj.lat, obj.lon) for obj in track_segment]
my_polyline = polyline.encode(line)
else:
return None
return my_polyline
def test_get_full_journey(self):
services=Calendar.objects.filter(service_id='2#1')
time='10:0'
prediction_day=0
date='15-08-2019'
p=pl.encode([(38.5, -120.2), (40.7, -120.9), (43.2, -126.4)], 5)
route={'routes':[{'legs':[{'steps':[
{'distance': {'value': 902},
'duration': {'value': 669},
'end_location': {'lat': 53.3188054, 'lng': -6.278130399999999},
'html_instructions': 'Walk to Harolds Cross, Kenilworth Square North',
'polyline':
{'points': p},
'start_location': {'lat': 53.3229403, 'lng': -6.2773135},
'travel_mode': 'WALKING'},
{'distance': {'value': 4358},
'duration': {'value': 1080},
'end_location': {'lat': 53.3286404, 'lng': -6.2293996},
'html_instructions': 'Bus towards Crumlin Childrens Hospital - Newgrove Avenue',
'polyline': {'points': p},
'start_location': {'lat': 53.3187381, 'lng': -6.2780827},
'transit_details':
{'arrival_stop': {
'location': {'lat': 53.3286404, 'lng': -6.2293996},
'name': 'Ballsbridge, Merrion Road RDS'},
'arrival_time': {'value': 1565861880},
'departure_stop': {
'location': {'lat': 53.3187381, 'lng': -6.2780827},
'name': 'Harolds Cross, Kenilworth Square North'},
'departure_time': {'value': 1565860800},
'headsign': 'Crumlin Childrens Hospital - Newgrove Avenue',
'line': {'agencies': [{'name': 'Go-Ahead'}], 'short_name': '18'},
'num_stops': 16}, 'travel_mode': 'TRANSIT'},
{'distance': { 'value': 8855},
'duration': {'value': 1696},
'end_location': {'lat': 53.29017030000001, 'lng': -6.131013},
'html_instructions': 'Bus towards Loughlinstown Pk',
'polyline': {'points':p},
'start_location': {'lat': 53.3286404, 'lng': -6.2293996},
'transit_details':
{'arrival_stop':
{'location': {'lat': 53.29017030000001, 'lng': -6.131013},
'name': "George's St Upper"},
'arrival_time': {'value': 1565864346},
'departure_stop': {
'location': {'lat': 53.3286404, 'lng': -6.2293996},
'name': 'Ballsbridge, Merrion Road RDS'},
'departure_time': {'value': 1565862650},
'headsign': 'Loughlinstown Pk',
'line': {'agencies': [{'name': 'Dublin Bus'}], 'short_name': '7a'},
'num_stops': 26}, 'travel_mode': 'TRANSIT'}
]}]}]}
#Beacuse we can't create entries using a composit key. This will always return an empty set
self.assertEquals(self.test_view_specific.get_full_journeys(route, time, services, prediction_day, date), [])
def get_eta_many_to_many_url(cls, from_latlon_list, to_latlon_list):
latlon_list = from_latlon_list + to_latlon_list
ids = range(len(latlon_list))
urlholder = """http://{hostport}/table/v1/driving/polyline({coords})?sources={sources}&destinations={destins}""".format(
hostport=OSRM_HOSTPORT,
coords=polyline.encode(latlon_list, 5),
sources=';'.join(map(str, ids[:len(from_latlon_list)])),
destins=';'.join(map(str, ids[len(from_latlon_list):])))
return urlholder
def batch_polyline_encode(self):
"""
Not used. https://developers.google.com/maps/documentation/elevation/overview#Locations
:return:
"""
result = []
for batch in self.create_batch_for_polyline():
result.append(polyline.encode(batch, 5, geojson=True))
return result
def import_streams(cls,
client,
activity_id,
stream_names,
timeout=CACHE_ACTIVITIES_TIMEOUT):
streams_to_import = list(stream_names)
if ("polyline" in stream_names):
streams_to_import.append("latlng")
streams_to_import.remove("polyline")
try:
streams = client.get_activity_streams(activity_id,
series_type='time',
types=streams_to_import)
except Exception as e:
msg = ("Can't import streams for activity {}:\n{}".format(
activity_id, e))
# app.logger.error(msg)
return {"error": msg}
activity_streams = {name: streams[name].data for name in streams}
# Encode/compress latlng data into polyline format
if "polyline" in stream_names:
if "latlng" in activity_streams:
activity_streams["polyline"] = polyline.encode(
activity_streams['latlng'])
else:
return {
"error":
"no latlng stream for activity {}".format(activity_id)
}
for s in ["time"]:
# Encode/compress these streams
if (s in stream_names) and (activity_streams.get(s)):
if len(activity_streams[s]) < 2:
return {
"error":
"activity {} has no stream '{}'".format(
activity_id, s)
}
try:
activity_streams[s] = cls.stream_encode(
activity_streams[s])
except Exception as e:
msg = (
"Can't encode stream '{}' for activity {} due to '{}':\n{}"
.format(s, activity_id, e, activity_streams[s]))
app.logger.error(msg)
return {"error": msg}
output = {s: activity_streams[s] for s in stream_names}
cls.set(activity_id, output, timeout)
return output
def build_map_url(coordinates):
params = {
'size': '640x640',
'scale': '2',
'maptype': 'terrain',
'path': 'enc:{polyline}'.format(polyline=polyline.encode(coordinates)),
'sensor': 'false',
'language': 'de'
}
return 'http://maps.googleapis.com/maps/api/staticmap?' + urllib.urlencode(params)
def parse_raw_data_to_nametuple(run_data, old_gpx_ids, with_download_gpx=False):
run_data = run_data["data"]
run_points_data = []
# 5898009e387e28303988f3b7_9223370441312156007_rn middle
keep_id = run_data["id"].split("_")[1]
start_time = run_data["startTime"]
if run_data.get("vendor", {}).get("source", "") == "Keep" and run_data.get(
"rawDataURL"
):
raw_data_url = run_data.get("rawDataURL")
r = requests.get(raw_data_url)
# string strart with `H4sIAAAAAAAA` --> decode and unzip
run_points_data = decode_runmap_data(r.text)
if with_download_gpx:
if str(keep_id) not in old_gpx_ids:
gpx_data = parse_points_to_gpx(run_points_data, start_time)
download_keep_gpx(gpx_data, str(keep_id))
run_points_data = [[p["latitude"], p["longitude"]] for p in run_points_data]
heart_rate = None
if run_data["heartRate"]:
heart_rate = run_data["heartRate"].get("averageHeartRate", None)
# fix #66
if heart_rate and heart_rate < 0:
heart_rate = None
polyline_str = polyline.encode(run_points_data) if run_points_data else ""
start_latlng = start_point(*run_points_data[0]) if run_points_data else None
start_date = datetime.utcfromtimestamp(start_time / 1000)
tz_name = run_data.get("timezone", "")
start_date_local = adjust_time(start_date, tz_name)
end = datetime.utcfromtimestamp(run_data["endTime"] / 1000)
end_local = adjust_time(end, tz_name)
d = {
"id": int(keep_id),
"name": "run from keep",
# future to support others workout now only for run
"type": "Run",
"start_date": datetime.strftime(start_date, "%Y-%m-%d %H:%M:%S"),
"end": datetime.strftime(end, "%Y-%m-%d %H:%M:%S"),
"start_date_local": datetime.strftime(start_date_local, "%Y-%m-%d %H:%M:%S"),
"end_local": datetime.strftime(end_local, "%Y-%m-%d %H:%M:%S"),
"length": run_data["distance"],
"average_heartrate": int(heart_rate) if heart_rate else None,
"map": run_map(polyline_str),
"start_latlng": start_latlng,
"distance": run_data["distance"],
"moving_time": timedelta(seconds=run_data["duration"]),
"elapsed_time": timedelta(
seconds=int((run_data["endTime"] - run_data["startTime"]) / 1000)
),
"average_speed": run_data["distance"] / run_data["duration"],
"location_country": str(run_data.get("region", "")),
}
return namedtuple("x", d.keys())(*d.values())
def _load_gpx_data(self, gpx):
self.start_time, self.end_time = gpx.get_time_bounds()
# use timestamp as id
self.run_id = int(datetime.datetime.timestamp(self.start_time) * 1000)
self.start_time_local, self.end_time_local = parse_datetime_to_local(
self.start_time, self.end_time, gpx)
if self.start_time is None:
raise TrackLoadError("Track has no start time.")
if self.end_time is None:
raise TrackLoadError("Track has no end time.")
self.length = gpx.length_2d()
if self.length == 0:
raise TrackLoadError("Track is empty.")
gpx.simplify()
polyline_container = []
heart_rate_list = []
# determinate type and source
if gpx.tracks[0].type:
self.type = gpx.tracks[0].type
if gpx.tracks[0].source:
self.source = gpx.tracks[0].source
if self.source == "xingzhe":
# self.start_time_local = self.start_time
self.run_id = gpx.tracks[0].number
if gpx.name:
self.name = gpx.name
else:
self.name = self.type + " from " + self.source
for t in gpx.tracks:
for s in t.segments:
try:
heart_rate_list.extend([
int(p.extensions[0].getchildren()[0].text)
for p in s.points if p.extensions
])
except:
pass
line = [
s2.LatLng.from_degrees(p.latitude, p.longitude)
for p in s.points
]
self.polylines.append(line)
polyline_container.extend([[p.latitude, p.longitude]
for p in s.points])
self.polyline_container = polyline_container
# get start point
try:
self.start_latlng = start_point(*polyline_container[0])
except:
pass
self.polyline_str = polyline.encode(polyline_container)
self.average_heartrate = (sum(heart_rate_list) / len(heart_rate_list)
if heart_rate_list else None)
self.moving_dict = self._get_moving_data(gpx)
def getMapquestlevations(API, locations=""):
encoded = polyline.encode(locations, 6)
encoded = encoded.replace("\\", "\\\\")
url = r"http://open.mapquestapi.com/elevation/v1/profile?key={0}&shapeFormat=cmp6&latLngCollection={1}".format(
API, encoded)
response = simplejson.load(urllib.request.urlopen(url))
elevationprofile = response["elevationProfile"]
elevations = []
for pt in elevationprofile:
elevations.append(pt["height"])
return elevations
def get_path(direction_data):
"""
get distance from google directions api response,
the unit for this field is meter
"""
path = []
for r in json.loads(direction_data)['routes'][0]['legs']:
for i in r['steps']:
path += polyline.decode(i['polyline']['points'])
return polyline.encode(path)
def append(self, other):
"""Append other track to self."""
self.end_time = other.end_time
self.length += other.length
self.moving_dict["distance"] += other.moving_dict["distance"]
self.moving_dict["moving_time"] += other.moving_dict["moving_time"]
self.moving_dict["elapsed_time"] += other.moving_dict["elapsed_time"]
self.polylines[0].extend(other.polylines[0])
self.polyline_str = polyline.encode(self.polylines[0])
self.file_names.extend(other.file_names)
self.special = self.special or other.special
def get_altitude(point):
try:
params = {'locations': 'enc:' + polyline.encode((point,))}
if config.GOOGLE_MAPS_KEY:
params['key'] = config.GOOGLE_MAPS_KEY
r = requests.get('https://maps.googleapis.com/maps/api/elevation/json',
params=params).json()
altitude = r['results'][0]['elevation']
except Exception:
altitude = random_altitude()
return altitude
def _add_shape_to_route(route, direction, shape, stop_distances, stats):
encoded_shape = polyline.encode(shape, stop_distances)
direction['stop_distances'] = encoded_shape['fixed_indexes']
if encoded_shape['points'] in route['shapes']:
logging.error('Duplicate shape encoding for route {}'.format(route['name']))
else:
route['shapes'].append(encoded_shape['points'])
direction['shape_i'] = len(route['shapes']) - 1
stats['shapes'] += 1
stats['points'] += len(shape)
stats['dropped_points'] += encoded_shape['num_dropped_points']
stats['bytes'] += len(encoded_shape['points'])
def group_by_segments(rides):
segments = defaultdict(list)
for ride in rides:
points = polyline.decode(ride.route.path)
for i in range(0, len(points)-1):
src = points[i]
dst = points[i+1]
segments[_sorted_tuple((src, dst))].append(ride)
logger.info("Got {} distinct segments".format(len(segments)))
return [(polyline.encode([src, dst]), rides) for (src, dst), rides in segments.items()]
def test_encode_multiple_points_precision(self):
e = polyline.encode([
(40.641, -8.654),
(40.641, -8.654),
(40.641, -8.656),
(40.642, -8.656),
(40.642, -8.655),
(40.642, -8.655),
(40.642, -8.655),
(40.642, -8.653),
(40.642, -8.653),
(40.642, -8.653),
(40.641, -8.653),
(40.641, -8.654)
], 6)
self.assertEqual(e, 'o}oolA~ieoO???~{Bo}@??o}@?????_|B????n}@??n}@')
def test_encode_multiple_points(self):
e = polyline.encode([
(40.641, -8.654),
(40.641, -8.654),
(40.641, -8.656),
(40.642, -8.656),
(40.642, -8.655),
(40.642, -8.655),
(40.642, -8.655),
(40.642, -8.653),
(40.642, -8.653),
(40.642, -8.653),
(40.641, -8.653),
(40.641, -8.654)
])
self.assertEqual(e, 'gu`wFnfys@???nKgE??gE?????oK????fE??fE')
def get_stream_data(activity_id):
key = "J:{}".format(activity_id)
stream_data = cache.get(key)
if not stream_data:
stream_names = ['time', 'latlng', 'distance', 'altitude']
streams = client.get_activity_streams(activity_id,
types=stream_names)
stream_data = {name: streams[name].data for name in streams}
if 'latlng' in stream_data:
stream_data["polyline"] = (
polyline.encode(stream_data.get('latlng'))
)
cache.set(key, stream_data, cache_timeout)
return stream_data
def import_streams(activity_id, stream_names):
streams_to_import = list(stream_names)
if ("polyline" in stream_names):
streams_to_import.append("latlng")
streams_to_import.remove("polyline")
try:
streams = client.get_activity_streams(activity_id,
series_type='time',
types=streams_to_import)
except Exception as e:
app.logger.debug(e)
return {"error": str(e)}
activity_streams = {name: streams[name].data for name in streams}
if ("polyline" in stream_names) and ("latlng" in activity_streams):
activity_streams["polyline"] = polyline.encode(
activity_streams['latlng'])
return {s: activity_streams[s] for s in stream_names}
def get_static(conn=None, max_attempts=3, size='800x600', **kwargs):
conn = conn or requests
base_url = 'https://maps.googleapis.com/maps/api/staticmap?'
try:
markers = '&markers={}'.format(kwargs.pop('markers'))
except KeyError:
markers = ''
# convert coordinates into polyline if not already
try:
path = kwargs.get('path', '')
substring = re.search('{}(.*){}'.format('enc:', '\|'), path).group()
data = json.loads(substring.split('enc:')[1])
encoded = polyline.encode(data)
path.replace(substring, 'enc:{}|'.format(encoded))
params['path'] = path
except NameError:
raise AttributeError('Unable to create polyline encoding because '
'polyline module is not installed')
except (AttributeError, IndexError, JSONDecodeError):
pass
# one url to bring them all and in the darkness bind them
params = '&'.join(['{}={}'.format(k,v) for k,v in iteritems(kwargs)])
url = '{b}{p}&size={s}{m}'.format(b=base_url, s=size, p=params, m=markers)
url = url[:2048].rsplit('|', 1)[0] #to keep url within 2048 char max limit
for x in range(max_attempts):
try:
res = conn.get(url)
res.raise_for_status()
break
except HTTPError:
pass
# raise if all attempts fail
res.raise_for_status()
img = Image.open(BytesIO(res.content))
return img
def test_a_variety_of_precisions(self):
"""uses a generator to create a variety of lat-lon's across the global
and tests a range of precision settings from 4 to 8"""
def generator():
while True:
coords = []
for i in range(2, randint(4, 10)):
lat, lon = uniform(-180.0, 180.0), uniform(-180.0, 180.0)
coords.append((lat, lon))
yield coords
patience = 3 # seconds.
waypoints, okays = 0, 0
g = generator()
start = time.time()
while time.time() < start + patience:
precision = randint(4, 8)
wp = next(g)
waypoints += len(wp)
poly = polyline.encode(wp, precision)
wp2 = polyline.decode(poly, precision)
if wp == wp2:
okays += len(wp2)
else:
for idx, _ in enumerate(wp):
dx, dy = abs(wp[idx][0] - wp2[idx][0]), abs(wp[idx][1] - wp2[idx][1])
if dx > 10 ** -(precision - 1) or dy > 10 ** -(precision - 1):
print("idx={}, dx={}, dy={}".format(idx, dx, dy))
else:
okays += 1
assert okays == waypoints
print("encoded and decoded {0:.2f}% correctly for {1} waypoints @ {2} wp/sec".format(
100 * okays / float(waypoints),
waypoints,
round(waypoints / patience, 0)))
import numpy as np
import polyline
# London bounding box
N = 51.691874116909894
E = 0.3340155643740321
S = 51.28676016315085
W = -0.5103750689005356
num_coords = 1000
coords = zip(
np.random.uniform(S, N, [num_coords]),
np.random.uniform(W, E, [num_coords])
)
if __name__ == "__main__":
for x in range(500):
polyline.encode(coords)
def path(self):
return polyline.encode([(x.lat, x.lng) for x in self.waypoints])
def test_rounding_py3_match_py2(self):
e = polyline.encode([
(36.05322, -112.084004),
(36.053573, -112.083914),
(36.053845, -112.083965)])
self.assertEqual(e, 'ss`{E~kbkTeAQw@J')
def test_encode_single_point_precision(self):
e = polyline.encode([
(40.641, -8.653)
], 6)
self.assertEqual(e, 'o}oolAnkcoO')
def _get_encoded_polyline(gpx_points, is_hq):
very_small = {True: 0.000005, False: 0.00002}[is_hq]
points = []
for point in gpx_points:
points.append((float(point['lat']), float(point['lon'])))
return polyline.encode(points, very_small=very_small)
def test_encode_single_point_rounding(self):
e = polyline.encode([
(0, 0.000006),
(0, 0.000002)
])
self.assertEqual(e, '?A?@')
def _get_encoded_points(self):
return polyline.encode(self._points)
def thumbnailUrlMapbox(ptlist):
token = keysnpwds['MapBoxApiKey']
l = urllib.quote_plus(polyline.encode(ptlist))
url = 'https://api.mapbox.com/styles/v1/mapbox/outdoors-v11/static/path(%s),pin-s-a(%f,%f),pin-s-b(%f,%f)/auto/130x110?access_token=%s'%(l,ptlist[0][1],ptlist[0][0],ptlist[-1][1],ptlist[-1][0],token)
return url
import time
from math import ceil
import haversine
import polyline
from math import ceil
from polyline_generator import Polyline
a = Polyline((47.1706378, 8.5167405), (47.1700271, 8.518072999999998), 100)
print(a.points)
print('Walking polyline: ', a.polyline)
print('Encoded level: ','B'*len(a.points))
print('Initialted with speed: ', a.speed, 'm/s')
print('Walking time: ', ceil(sum([haversine.haversine(*x)*1000/a.speed for x in a.walk_steps()])), ' sec.')
generated_polyline = []
while a.points[-1] != a.get_pos()[0]:
pos = a.get_pos()
generated_polyline += pos
print(pos)
time.sleep(0.1)
else:
print("We have reached our destination.")
print(polyline.encode(generated_polyline))
print('Encoded level: ','B'*len(generated_polyline))
print('Verify at: ', 'https://developers.google.com/maps/documentation/utilities/polylineutility')
def encode_polyline(features):
"""Encode and iterable of features as a polyline
"""
points = list(read_points(features))
latlon_points = [(x[1], x[0]) for x in points]
return polyline.encode(latlon_points)
def compose_locations_param(points):
param = polyline.encode(points)
return 'enc:'+param
def combine_polylines(self, points):
return polyline.encode(points)
def test_encode_single_point(self):
e = polyline.encode([
(40.641, -8.653)
])
self.assertEqual(e, 'gu`wFf`ys@')
