예제 #1
0
    def __init__(self,
                 name,
                 heat_transfer_coefficient = 1,
                 pressure_drop_Pa = 500,
                 a_volume_m3 = 10,
                 b_volume_m3 = 10,
                 contact_area_m2 = physics.medium_heat_exchanger_area_m2,
                 a_pipe_size_m2 = physics.medium_pipe_size_m2,
                 b_pipe_size_m2 = physics.medium_pipe_size_m2,
                 connector_lengths_m = 0.5,
                 height_m=5.0,
                 base_height_m=0):

        component.__init__(self, name)

        self.a_volume_m3 = a_volume_m3
        self.b_volume_m3 = b_volume_m3
        self.a_fluid = self._add_fluid(fluid(name+".a", self.a_volume_m3 / (height_m/2), height_m, base_height_m))
        self.b_fluid = self._add_fluid(fluid(name+".b", self.b_volume_m3 / (height_m/2), height_m, base_height_m))

        self.a_in  = self.a_fluid.add_port(port("a_in",  self.a_fluid, a_pipe_size_m2, connector_lengths_m, height_m))
        self.a_out = self.a_fluid.add_port(port("a_out", self.a_fluid, a_pipe_size_m2, connector_lengths_m, height_m))
        self.b_in   = self.b_fluid.add_port(port("b_in",   self.b_fluid,  b_pipe_size_m2,  connector_lengths_m, height_m))
        self.b_out  = self.b_fluid.add_port(port("b_out",  self.b_fluid,  b_pipe_size_m2,  connector_lengths_m, height_m))

        self.contact_area_m2 = contact_area_m2
        self.heat_transfer_coefficient = heat_transfer_coefficient
        self.pressure_drop_Pa = pressure_drop_Pa
예제 #2
0
    def __init__(self, name, length_m = 1, area_m2 = physics.medium_pipe_size_m2, height_m=0):
        component.__init__(self, name)
        self.length_m = length_m
        self.area_m2 = area_m2
        self.volume_m3 = area_m2 * length_m
        self.fluid = self._add_fluid(fluid(name, self.area_m2, length_m, height_m - length_m / 2.0))

        self.in_port  = self.fluid.add_port(port("in",   self.fluid, area_m2, length_m/2.0, height_m))
        self.out_port = self.fluid.add_port(port("out",  self.fluid, area_m2, length_m/2.0, height_m))
예제 #3
0
	def __init__(self, int_select):
		self.dev = Device(mode='b', interface_select = int_select, auto_detach=False, device_id = 'Dual RS232-HS' )

		self.write_port_l = 0x80
		self.read_port_l = 0x81
		self.write_port_h = 0x82
		self.read_port_h = 0x83
		self.port_l = port(self.dev,self.write_port_l, self.read_port_l)
		self.port_h = port(self.dev,self.write_port_h, self.read_port_h)	
예제 #4
0
    def __init__(self, name, length_m = 20.0, start_height_m = 0.0, end_height_m = 0.0, area_m2 = physics.medium_pipe_size_m2):
        component.__init__(self, name)
        self.length_m = length_m
        self.area_m2 = area_m2
        self.volume_m3 = area_m2 * length_m
        base_h = min(start_height_m, end_height_m)
        h      = max(start_height_m, end_height_m) - base_h
        # TODO: Better area for pipe, base on slope
        self.fluid = self._add_fluid(fluid(name, self.area_m2, h, base_h))

        self.in_port  = self.fluid.add_port(port("in_port", self.fluid, area_m2, length_m/2.0, start_height_m))
        self.out_port = self.fluid.add_port(port("out_port",   self.fluid, area_m2, length_m/2.0, end_height_m))
예제 #5
0
    def __init__(self, name, max_pressure_Pa = physics.medium_pump_pressure_Pa, height_m = 1, base_height_m = 0, area_m2 = physics.medium_pipe_size_m2, pump_length_m = 2):
        component.__init__(self, name)
        self.length_m = pump_length_m
        self.area_m2 = area_m2
        self.volume_m3 = self.area_m2 * self.length_m
        self.fluid = self._add_fluid(fluid(name, self.volume_m3, height_m, base_height_m))

        self.in_port  = self.fluid.add_port(port("in",  self.fluid, area_m2, pump_length_m/2.0, height_m))
        self.out_port = self.fluid.add_port(port("out", self.fluid, area_m2, pump_length_m/2.0, height_m))

        self.max_pressure_Pa = max_pressure_Pa

        self.adjust_power(0.5)
예제 #6
0
    def __init__(self,
                 name,
                 length_m=1,
                 area_m2=physics.medium_pipe_size_m2,
                 height_m=0):
        component.__init__(self, name)
        self.length_m = length_m
        self.area_m2 = area_m2
        self.volume_m3 = area_m2 * length_m
        self.fluid = self._add_fluid(
            fluid(name, self.area_m2, length_m, height_m - length_m / 2.0))

        self.in_port = self.fluid.add_port(
            port("in", self.fluid, area_m2, length_m / 2.0, height_m))
        self.out_port = self.fluid.add_port(
            port("out", self.fluid, area_m2, length_m / 2.0, height_m))
예제 #7
0
파일: markus.py 프로젝트: ms412/CANatHome1
def main():
    print('start')
    do_connect()
    sleep_ms(10000)
    sensor1 = Ultrasonic(14, 13)
    p = port(2)
    led = machine.Pin(0, machine.Pin.OUT)
    led.value(0)
    while True:
        #  (tem,hum) = medirTemHum()
        # displaytem(tem,hum)
        tem = 'TEST1'
        hum = 'TEST2'
        temp = oneWire()
        dist = sensor1.distance_in_cm()
        print("Sensor1 (Metric System)", dist, "cm")

        envioMQTT(SERVER, TOPIC1, str(temp))
        envioMQTT(SERVER, TOPIC2, str(dist))
        #envioMQTT(SERVER,TOPIC2,())
        # recepcionMQTT()
        sleep_ms(5000)
        led.value(1)
        sleep_ms(5000)
        led.value(0)
예제 #8
0
파일: pipe.py 프로젝트: zbyso23/reactor
    def __init__(self,
                 name,
                 length_m=20.0,
                 start_height_m=0.0,
                 end_height_m=0.0,
                 area_m2=physics.medium_pipe_size_m2):
        component.__init__(self, name)
        self.length_m = length_m
        self.area_m2 = area_m2
        self.volume_m3 = area_m2 * length_m
        base_h = min(start_height_m, end_height_m)
        h = max(start_height_m, end_height_m) - base_h
        # TODO: Better area for pipe, base on slope
        self.fluid = self._add_fluid(fluid(name, self.area_m2, h, base_h))

        self.in_port = self.fluid.add_port(
            port("in_port", self.fluid, area_m2, length_m / 2.0,
                 start_height_m))
        self.out_port = self.fluid.add_port(
            port("out_port", self.fluid, area_m2, length_m / 2.0,
                 end_height_m))
예제 #9
0
    def __init__(self,
                 name,
                 heat_transfer_coefficient=1,
                 pressure_drop_Pa=500,
                 a_volume_m3=10,
                 b_volume_m3=10,
                 contact_area_m2=physics.medium_heat_exchanger_area_m2,
                 a_pipe_size_m2=physics.medium_pipe_size_m2,
                 b_pipe_size_m2=physics.medium_pipe_size_m2,
                 connector_lengths_m=0.5,
                 height_m=5.0,
                 base_height_m=0):

        component.__init__(self, name)

        self.a_volume_m3 = a_volume_m3
        self.b_volume_m3 = b_volume_m3
        self.a_fluid = self._add_fluid(
            fluid(name + ".a", self.a_volume_m3 / (height_m / 2), height_m,
                  base_height_m))
        self.b_fluid = self._add_fluid(
            fluid(name + ".b", self.b_volume_m3 / (height_m / 2), height_m,
                  base_height_m))

        self.a_in = self.a_fluid.add_port(
            port("a_in", self.a_fluid, a_pipe_size_m2, connector_lengths_m,
                 height_m))
        self.a_out = self.a_fluid.add_port(
            port("a_out", self.a_fluid, a_pipe_size_m2, connector_lengths_m,
                 height_m))
        self.b_in = self.b_fluid.add_port(
            port("b_in", self.b_fluid, b_pipe_size_m2, connector_lengths_m,
                 height_m))
        self.b_out = self.b_fluid.add_port(
            port("b_out", self.b_fluid, b_pipe_size_m2, connector_lengths_m,
                 height_m))

        self.contact_area_m2 = contact_area_m2
        self.heat_transfer_coefficient = heat_transfer_coefficient
        self.pressure_drop_Pa = pressure_drop_Pa
예제 #10
0
파일: pump.py 프로젝트: zbyso23/reactor
    def __init__(self,
                 name,
                 max_pressure_Pa=physics.medium_pump_pressure_Pa,
                 height_m=1,
                 base_height_m=0,
                 area_m2=physics.medium_pipe_size_m2,
                 pump_length_m=2):
        component.__init__(self, name)
        self.length_m = pump_length_m
        self.area_m2 = area_m2
        self.volume_m3 = self.area_m2 * self.length_m
        self.fluid = self._add_fluid(
            fluid(name, self.volume_m3, height_m, base_height_m))

        self.in_port = self.fluid.add_port(
            port("in", self.fluid, area_m2, pump_length_m / 2.0, height_m))
        self.out_port = self.fluid.add_port(
            port("out", self.fluid, area_m2, pump_length_m / 2.0, height_m))

        self.max_pressure_Pa = max_pressure_Pa

        self.adjust_power(0.5)
예제 #11
0
파일: river.py 프로젝트: zbyso23/reactor
    def __init__(self,
                 name,
                 height_m=-2.0,
                 pipe_size_m2=physics.large_pipe_size_m2,
                 pipe_length_m=20.0,
                 river_temperature_C=18.0):
        component.__init__(self, name)
        self.height_m = height_m

        self.river_water = self._add_fluid(
            fluid(name, 100, 10, -5, 0.5, True, True, river_temperature_C))
        self.port = self.river_water.add_port(
            port("river", self.river_water, pipe_size_m2, pipe_length_m,
                 height_m))
예제 #12
0
 def add_port(self, name, area_m2 = 0.25, length_m = 0.5, relative_height_m = 0):
     return self.fluid.add_port(port(name, self.fluid, area_m2, length_m, relative_height_m))
예제 #13
0
def scanport(url):
    port.port(url)
예제 #14
0
    def __init__(self, name, height_m=-2.0, pipe_size_m2=physics.large_pipe_size_m2, pipe_length_m=20.0, river_temperature_C=18.0):
        component.__init__(self, name)
        self.height_m = height_m

        self.river_water = self._add_fluid(fluid(name, 100, 10, -5, 0.5, True, True, river_temperature_C))
        self.port = self.river_water.add_port(port("river", self.river_water, pipe_size_m2, pipe_length_m, height_m))
예제 #15
0
파일: tank.py 프로젝트: zbyso23/reactor
 def add_port(self, name, area_m2=0.25, length_m=0.5, relative_height_m=0):
     return self.fluid.add_port(
         port(name, self.fluid, area_m2, length_m, relative_height_m))
예제 #16
0
 def port(self):
 	print "Port Activity opened @ %.19s"%(datetime.now())
     self.por = tk.Toplevel(self.parent)
     self.app=port(self.por)