def testGetProvidingPowerSource(self):
type = power.PowerManagement().get_providing_power_source_type()
self.assertIsNotNone(type)
self.assertIsInstance(type, int)
self.assertIn(type, [
power.POWER_TYPE_AC, power.POWER_TYPE_BATTERY, power.POWER_TYPE_UPS
])
def remaining(self):
estimate = 0.0
power_now = 0.0
try:
estimate = power.PowerManagement().get_time_remaining_estimate()
# do not show remaining if on AC
if estimate == power.common.TIME_REMAINING_UNLIMITED:
return None
elif estimate == power.common.TIME_REMAINING_UNKNOWN:
return ""
else:
for path in self._batteries:
try:
with open("{}/power_now".format(path)) as o:
power_now += int(o.read())
except IOError:
return "n/a"
except Exception:
errors += 1
estimate = float(self.energy_now / power_now)
except Exception:
return ""
return bumblebee.util.durationfmt(
estimate * 60, shorten=True, suffix=True) # estimate is in minutes
def get_power_info():
ans = power.PowerManagement().get_providing_power_source_type()
if not ans:
print ("Plugged into wall socket")
else:
print ("On battery")
return None
def testGetRemainingEstimate(self):
estimate = power.PowerManagement().get_time_remaining_estimate()
self.assertIsNotNone(estimate)
self.assertIsInstance(estimate, float)
self.assertTrue(estimate == power.TIME_REMAINING_UNKNOWN
or estimate == power.TIME_REMAINING_UNLIMITED
or estimate >= 0.0)
def testGetLowBatteryWarningLevel(self):
level = power.PowerManagement().get_low_battery_warning_level()
self.assertIsNotNone(level)
self.assertIsInstance(level, int)
self.assertIn(level, [
power.LOW_BATTERY_WARNING_NONE, power.LOW_BATTERY_WARNING_EARLY,
power.LOW_BATTERY_WARNING_FINAL
])
def take_action(music_file, volume, horaBegin, horaEnd,
atual): #notificacao da percentagem da bateria
command_above = "notify-send 'Bateria acima de 60'%"
command_below = "notify-send 'Bateria abaixo de 60%'"
command_Corrente = "notify-send 'Em modo Corrente'"
command_bat = "notify-send 'Em modo Bateria'"
times = 0
ans = power.PowerManagement().get_providing_power_source_type()
if not ans:
#Modo Corrente
subprocess.Popen(["/bin/bash", "-c", command_Corrente])
charge = int(read_status())
times = 0
time.sleep(30)
take_action(music_file, volume, horaBegin, horaEnd, atual)
else:
#Modo Bateria
subprocess.Popen(["/bin/bash", "-c", command_bat])
charge = int(read_status())
time.sleep(5)
print(atual < horaEnd or atual == horaBegin)
if ((atual < horaEnd or atual == horaBegin)):
if charge > 60:
print "> 60"
subprocess.Popen(["/bin/bash", "-c", command_above])
time.sleep(10)
take_action(music_file, volume, horaBegin, horaEnd, atual)
if times == 0:
subprocess.Popen(["/bin/bash", "-c", command_below])
times = 1
else:
times = 0
time.sleep(5)
take_action(music_file, volume, horaBegin, horaEnd, atual)
elif charge < 60:
print "< 60"
play_music(music_file, volume)
time.sleep(10)
take_action(music_file, volume, horaBegin, horaEnd, atual)
if times == 0:
subprocess.Popen(["/bin/bash", "-c", command_below])
times = 1
else:
times = 0
time.sleep(10)
take_action(music_file, volume, horaBegin, horaEnd, atual)
else:
time.sleep(15)
take_action(music_file, volume, horaBegin, horaEnd, atual)
def remaining(self):
try:
estimate = power.PowerManagement().get_time_remaining_estimate()
# do not show remaining if on AC
if estimate == power.common.TIME_REMAINING_UNLIMITED:
return None
return estimate * 60 # return value in seconds
except Exception as e:
return -1
return -1
def check_for_charger():
try:
ans = power.PowerManagement().get_providing_power_source_type()
global charger_plugged_in
if not ans:
charger_plugged_in = True
else:
charger_plugged_in = False
except:
pass
def remaining(self):
estimate = 0.0
try:
estimate = power.PowerManagement().get_time_remaining_estimate()
# do not show remaining if on AC
if estimate == power.common.TIME_REMAINING_UNLIMITED:
return None
if estimate == power.common.TIME_REMAINING_UNKNOWN:
return ""
except Exception:
return ""
return bumblebee.util.durationfmt(estimate*60, shorten=True, suffix=True) # estimate is in minutes
def set_autofreq():
print("\n" + "-" * 28 + " CPU frequency scaling " + "-" * 28 + "\n")
# get battery state
bat_state = power.PowerManagement().get_providing_power_source_type()
# determine which governor should be used
if bat_state == power.POWER_TYPE_AC:
print("Battery is: charging")
set_performance()
elif bat_state == power.POWER_TYPE_BATTERY:
print("Battery is: discharging")
set_powersave()
else:
print("Couldn't determine battery status. Please report this issue.")
def __init__(self, plugin, bar):
UI.PopupWindow.__init__(self, bar, plugin)
self.power = power.PowerManagement()
self.firstAttempt = True
box = gtk.HBox(False, 4)
box.set_border_width(2)
self.add(box)
self.label = gtk.Label()
self.label.set_use_markup(True)
self.label.set_markup('no battery ..')
box.pack_start(self.label)
box.show_all()
gobject.timeout_add(4000, self.initial_update_status)
gobject.timeout_add(60000, self.update_status)
def __init__(self, parent, printerConnection):
super(printWindowBasic, self).__init__(parent, -1, style=wx.CLOSE_BOX|wx.CLIP_CHILDREN|wx.CAPTION|wx.SYSTEM_MENU|wx.FRAME_TOOL_WINDOW|wx.FRAME_FLOAT_ON_PARENT, title=_("Printing on %s") % (printerConnection.getName()))
self._printerConnection = printerConnection
self._lastUpdateTime = 0
self.SetSizer(wx.BoxSizer())
self.panel = wx.Panel(self)
self.GetSizer().Add(self.panel, 1, flag=wx.EXPAND)
self.sizer = wx.GridBagSizer(2, 2)
self.panel.SetSizer(self.sizer)
self.powerWarningText = wx.StaticText(parent=self.panel,
id=-1,
label=_("Your computer is running on battery power.\nConnect your computer to AC power or your print might not finish."),
style=wx.ALIGN_CENTER)
self.powerWarningText.SetBackgroundColour('red')
self.powerWarningText.SetForegroundColour('white')
self.powerManagement = power.PowerManagement()
self.powerWarningTimer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnPowerWarningChange, self.powerWarningTimer)
self.OnPowerWarningChange(None)
self.powerWarningTimer.Start(10000)
self.statsText = wx.StaticText(self.panel, -1, _("InfoLine from printer connection\nInfoLine from dialog\nExtra line\nMore lines for layout\nMore lines for layout\nMore lines for layout"))
self.connectButton = wx.Button(self.panel, -1, _("Connect"))
#self.loadButton = wx.Button(self.panel, -1, 'Load')
self.printButton = wx.Button(self.panel, -1, _("Print"))
self.pauseButton = wx.Button(self.panel, -1, _("Pause"))
self.cancelButton = wx.Button(self.panel, -1, _("Cancel print"))
self.errorLogButton = wx.Button(self.panel, -1, _("Error log"))
self.progress = wx.Gauge(self.panel, -1, range=1000)
self.sizer.Add(self.powerWarningText, pos=(0, 0), span=(1, 5), flag=wx.EXPAND|wx.BOTTOM, border=5)
self.sizer.Add(self.statsText, pos=(1, 0), span=(1, 5), flag=wx.LEFT, border=5)
self.sizer.Add(self.connectButton, pos=(2, 0))
#self.sizer.Add(self.loadButton, pos=(2,1))
self.sizer.Add(self.printButton, pos=(2, 1))
self.sizer.Add(self.pauseButton, pos=(2, 2))
self.sizer.Add(self.cancelButton, pos=(2, 3))
self.sizer.Add(self.errorLogButton, pos=(2, 4))
self.sizer.Add(self.progress, pos=(3, 0), span=(1, 5), flag=wx.EXPAND)
self.Bind(wx.EVT_CLOSE, self.OnClose)
self.connectButton.Bind(wx.EVT_BUTTON, self.OnConnect)
#self.loadButton.Bind(wx.EVT_BUTTON, self.OnLoad)
self.printButton.Bind(wx.EVT_BUTTON, self.OnPrint)
self.pauseButton.Bind(wx.EVT_BUTTON, self.OnPause)
self.cancelButton.Bind(wx.EVT_BUTTON, self.OnCancel)
self.errorLogButton.Bind(wx.EVT_BUTTON, self.OnErrorLog)
self.Layout()
self.Fit()
self.Centre()
self.progress.SetMinSize(self.progress.GetSize())
self.statsText.SetLabel('\n\n\n\n\n\n')
self._updateButtonStates()
self._printerConnection.addCallback(self._doPrinterConnectionUpdate)
if self._printerConnection.hasActiveConnection() and not self._printerConnection.isActiveConnectionOpen():
self._printerConnection.openActiveConnection()
preventComputerFromSleeping(True)
def testGetRemainingEstimate(self):
estimate = power.PowerManagement().get_time_remaining_estimate()
self.assertIsNotNone(estimate)
self.assertIsInstance(estimate, float)
self.assertTrue(estimate == -1.0 or estimate == -2.0 or estimate >= 0.0)
def power_source_type():
power_type = power.PowerManagement().get_providing_power_source_type()
return POWER_TYPE_MAP[power_type]
def __init__(self, printerConnection):
super(printWindow, self).__init__(None, -1, title=_("Printing"))
self._printerConnection = printerConnection
self.lastUpdateTime = 0
self.SetSizer(wx.BoxSizer())
self.panel = wx.Panel(self)
self.GetSizer().Add(self.panel, 1, flag=wx.EXPAND)
self.sizer = wx.GridBagSizer(2, 2)
self.panel.SetSizer(self.sizer)
sb = wx.StaticBox(self.panel, label=_("Statistics"))
boxsizer = wx.StaticBoxSizer(sb, wx.VERTICAL)
self.powerWarningText = wx.StaticText(parent=self.panel,
id=-1,
label=_("Your computer is running on battery power.\nConnect your computer to AC power or your print might not finish."),
style=wx.ALIGN_CENTER)
self.powerWarningText.SetBackgroundColour('red')
self.powerWarningText.SetForegroundColour('white')
boxsizer.AddF(self.powerWarningText, flags=wx.SizerFlags().Expand().Border(wx.BOTTOM, 10))
self.powerManagement = power.PowerManagement()
self.powerWarningTimer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnPowerWarningChange, self.powerWarningTimer)
self.OnPowerWarningChange(None)
self.powerWarningTimer.Start(10000)
self.statsText = wx.StaticText(self.panel, -1, _("Filament: ####.##m #.##g\nEstimated print time: #####:##\nMachine state:\nDetecting baudrateXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"))
boxsizer.Add(self.statsText, flag=wx.LEFT, border=5)
self.sizer.Add(boxsizer, pos=(0, 0), span=(7, 1), flag=wx.EXPAND)
self.connectButton = wx.Button(self.panel, -1, _("Connect"))
#self.loadButton = wx.Button(self.panel, -1, 'Load')
self.printButton = wx.Button(self.panel, -1, _("Print"))
self.pauseButton = wx.Button(self.panel, -1, _("Pause"))
self.cancelButton = wx.Button(self.panel, -1, _("Cancel print"))
self.errorLogButton = wx.Button(self.panel, -1, _("Error log"))
self.progress = wx.Gauge(self.panel, -1, range=1000)
self.sizer.Add(self.connectButton, pos=(1, 1), flag=wx.EXPAND)
#self.sizer.Add(self.loadButton, pos=(1,1), flag=wx.EXPAND)
self.sizer.Add(self.printButton, pos=(2, 1), flag=wx.EXPAND)
self.sizer.Add(self.pauseButton, pos=(3, 1), flag=wx.EXPAND)
self.sizer.Add(self.cancelButton, pos=(4, 1), flag=wx.EXPAND)
self.sizer.Add(self.errorLogButton, pos=(5, 1), flag=wx.EXPAND)
self.sizer.Add(self.progress, pos=(7, 0), span=(1, 7), flag=wx.EXPAND)
nb = wx.Notebook(self.panel)
self.tabs = nb
self.sizer.Add(nb, pos=(0, 2), span=(7, 4), flag=wx.EXPAND)
self.temperaturePanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.temperaturePanel.SetSizer(sizer)
self.temperatureSelect = wx.SpinCtrl(self.temperaturePanel, -1, '0', size=(21 * 3, 21), style=wx.SP_ARROW_KEYS)
self.temperatureSelect.SetRange(0, 400)
self.temperatureHeatUp = wx.Button(self.temperaturePanel, -1, str(int(profile.getProfileSettingFloat('print_temperature'))) + 'C')
self.bedTemperatureLabel = wx.StaticText(self.temperaturePanel, -1, _("BedTemp:"))
self.bedTemperatureSelect = wx.SpinCtrl(self.temperaturePanel, -1, '0', size=(21 * 3, 21), style=wx.SP_ARROW_KEYS)
self.bedTemperatureSelect.SetRange(0, 400)
self.bedTemperatureLabel.Show(False)
self.bedTemperatureSelect.Show(False)
self.temperatureGraph = TemperatureGraph(self.temperaturePanel)
sizer.Add(wx.StaticText(self.temperaturePanel, -1, _("Temp:")), pos=(0, 0))
sizer.Add(self.temperatureSelect, pos=(0, 1))
sizer.Add(self.temperatureHeatUp, pos=(0, 2))
sizer.Add(self.bedTemperatureLabel, pos=(1, 0))
sizer.Add(self.bedTemperatureSelect, pos=(1, 1))
sizer.Add(self.temperatureGraph, pos=(2, 0), span=(1, 3), flag=wx.EXPAND)
sizer.AddGrowableRow(2)
sizer.AddGrowableCol(2)
nb.AddPage(self.temperaturePanel, 'Temp')
self.directControlPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.directControlPanel.SetSizer(sizer)
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y100 F6000', 'G90'], 'print-move-y100.png'), pos=(0, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y10 F6000', 'G90'], 'print-move-y10.png'), pos=(1, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y1 F6000', 'G90'], 'print-move-y1.png'), pos=(2, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-1 F6000', 'G90'], 'print-move-y-1.png'), pos=(4, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-10 F6000', 'G90'], 'print-move-y-10.png'), pos=(5, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-100 F6000', 'G90'], 'print-move-y-100.png'), pos=(6, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-100 F6000', 'G90'], 'print-move-x-100.png'), pos=(3, 0))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-10 F6000', 'G90'], 'print-move-x-10.png'), pos=(3, 1))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-1 F6000', 'G90'], 'print-move-x-1.png'), pos=(3, 2))
sizer.Add(PrintCommandButton(self, ['G28 X0 Y0'], 'print-move-home.png'), pos=(3, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X1 F6000', 'G90'], 'print-move-x1.png'), pos=(3, 4))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X10 F6000', 'G90'], 'print-move-x10.png'), pos=(3, 5))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X100 F6000', 'G90'], 'print-move-x100.png'), pos=(3, 6))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z10 F200', 'G90'], 'print-move-z10.png'), pos=(0, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z1 F200', 'G90'], 'print-move-z1.png'), pos=(1, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z0.1 F200', 'G90'], 'print-move-z0.1.png'), pos=(2, 8))
sizer.Add(PrintCommandButton(self, ['G28 Z0'], 'print-move-home.png'), pos=(3, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-0.1 F200', 'G90'], 'print-move-z-0.1.png'), pos=(4, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-1 F200', 'G90'], 'print-move-z-1.png'), pos=(5, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-10 F200', 'G90'], 'print-move-z-10.png'), pos=(6, 8))
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E2 F120'], 'extrude.png', size=(60, 20)), pos=(1, 10), span=(1, 3), flag=wx.EXPAND)
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E-2 F120'], 'retract.png', size=(60, 20)), pos=(2, 10), span=(1, 3), flag=wx.EXPAND)
nb.AddPage(self.directControlPanel, _("Jog"))
self.termPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.termPanel.SetSizer(sizer)
f = wx.Font(8, wx.FONTFAMILY_MODERN, wx.FONTSTYLE_NORMAL, wx.FONTWEIGHT_NORMAL, False)
self.termLog = wx.TextCtrl(self.termPanel, style=wx.TE_MULTILINE | wx.TE_DONTWRAP)
self.termLog.SetFont(f)
self.termLog.SetEditable(0)
self.termInput = wx.TextCtrl(self.termPanel, style=wx.TE_PROCESS_ENTER)
self.termInput.SetFont(f)
self._termHistory = []
self._termHistoryIdx = 0
sizer.Add(self.termLog, pos=(0, 0), flag=wx.EXPAND)
sizer.Add(self.termInput, pos=(1, 0), flag=wx.EXPAND)
sizer.AddGrowableCol(0)
sizer.AddGrowableRow(0)
nb.AddPage(self.termPanel, _("Term"))
self.sizer.AddGrowableRow(6)
self.sizer.AddGrowableCol(3)
self.Bind(wx.EVT_CLOSE, self.OnClose)
self.connectButton.Bind(wx.EVT_BUTTON, self.OnConnect)
#self.loadButton.Bind(wx.EVT_BUTTON, self.OnLoad)
self.printButton.Bind(wx.EVT_BUTTON, self.OnPrint)
self.pauseButton.Bind(wx.EVT_BUTTON, self.OnPause)
self.cancelButton.Bind(wx.EVT_BUTTON, self.OnCancel)
self.errorLogButton.Bind(wx.EVT_BUTTON, self.OnErrorLog)
self.Bind(wx.EVT_BUTTON, lambda e: (self.temperatureSelect.SetValue(int(profile.getProfileSettingFloat('print_temperature'))), self.machineCom.sendCommand("M104 S%d" % (int(profile.getProfileSettingFloat('print_temperature'))))), self.temperatureHeatUp)
self.Bind(wx.EVT_SPINCTRL, self.OnTempChange, self.temperatureSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnBedTempChange, self.bedTemperatureSelect)
self.Bind(wx.EVT_TEXT_ENTER, self.OnTermEnterLine, self.termInput)
self.termInput.Bind(wx.EVT_CHAR, self.OnTermKey)
self.Layout()
self.Fit()
self.Centre()
self.statsText.SetMinSize(self.statsText.GetSize())
self.statsText.SetLabel(self._printerConnection.getStatusString())
self.UpdateButtonStates()
if webcam.hasWebcamSupport():
#Need to call the camera class on the GUI thread, or else it won't work. Shame as it hangs the GUI for about 2 seconds.
wx.CallAfter(self._webcamCheck)
self._printerConnection.addCallback(self._doPrinterConnectionUpdate)
self.assertIsNotNone(estimate)
self.assertIsInstance(estimate, float)
self.assertTrue(estimate == -1.0 or estimate == -2.0 or estimate >= 0.0)
def testGetProvidingPowerSource(self):
type = power.PowerManagement().get_providing_power_source_type()
self.assertIsNotNone(type)
self.assertIsInstance(type, int)
self.assertIn(type, [power.POWER_TYPE_AC, power.POWER_TYPE_BATTERY, power.POWER_TYPE_UPS])
class TestObserver(power.PowerManagementObserver):
def on_power_sources_change(self, power_management):
print "on_power_sources_change"
def on_time_remaining_change(self, power_management):
print "on_time_remaining_change"
if __name__ == "__main__":
o = TestObserver()
p = power.PowerManagement()
p.add_observer(o)
try:
print "Power management observer is registered"
import time
while True:
time.sleep(1)
finally:
p.remove_observer(o)
def power_remaining_estimate():
estimate = power.PowerManagement().get_time_remaining_estimate()
if estimate < 0:
return estimate
# API returns minutes, Prometheus prefers seconds as the standard.
return estimate * 60
def __init__(self, parent, printerConnection):
super(printWindowAdvanced, self).__init__(parent, -1, style=wx.CLOSE_BOX|wx.CLIP_CHILDREN|wx.CAPTION|wx.SYSTEM_MENU|wx.FRAME_FLOAT_ON_PARENT|wx.MINIMIZE_BOX, title=_("Printing on %s") % (printerConnection.getName()))
self._printerConnection = printerConnection
self._lastUpdateTime = time.time()
self._printDuration = 0
self._lastDurationTime = None
self._isPrinting = False
self.SetSizer(wx.BoxSizer(wx.VERTICAL))
self.toppanel = wx.Panel(self)
self.topsizer = wx.GridBagSizer(2, 2)
self.toppanel.SetSizer(self.topsizer)
self.toppanel.SetBackgroundColour(wx.WHITE)
self.topsizer.SetEmptyCellSize((125, 1))
self.panel = wx.Panel(self)
self.sizer = wx.GridBagSizer(2, 2)
self.sizer.SetEmptyCellSize((125, 1))
self.panel.SetSizer(self.sizer)
self.panel.SetBackgroundColour(wx.WHITE)
self.GetSizer().Add(self.toppanel, 0, flag=wx.EXPAND)
self.GetSizer().Add(self.panel, 1, flag=wx.EXPAND)
self._fullscreenTemperature = None
self._termHistory = []
self._termHistoryIdx = 0
self._mapImage = wx.Image(resources.getPathForImage('print-window-map.png'))
self._colorCommandMap = {}
# Move X
self._addMovementCommand(0, 0, 255, self._moveX, 100)
self._addMovementCommand(0, 0, 240, self._moveX, 10)
self._addMovementCommand(0, 0, 220, self._moveX, 1)
self._addMovementCommand(0, 0, 200, self._moveX, 0.1)
self._addMovementCommand(0, 0, 180, self._moveX, -0.1)
self._addMovementCommand(0, 0, 160, self._moveX, -1)
self._addMovementCommand(0, 0, 140, self._moveX, -10)
self._addMovementCommand(0, 0, 120, self._moveX, -100)
# Move Y
self._addMovementCommand(0, 255, 0, self._moveY, -100)
self._addMovementCommand(0, 240, 0, self._moveY, -10)
self._addMovementCommand(0, 220, 0, self._moveY, -1)
self._addMovementCommand(0, 200, 0, self._moveY, -0.1)
self._addMovementCommand(0, 180, 0, self._moveY, 0.1)
self._addMovementCommand(0, 160, 0, self._moveY, 1)
self._addMovementCommand(0, 140, 0, self._moveY, 10)
self._addMovementCommand(0, 120, 0, self._moveY, 100)
# Move Z
self._addMovementCommand(255, 0, 0, self._moveZ, 10)
self._addMovementCommand(220, 0, 0, self._moveZ, 1)
self._addMovementCommand(200, 0, 0, self._moveZ, 0.1)
self._addMovementCommand(180, 0, 0, self._moveZ, -0.1)
self._addMovementCommand(160, 0, 0, self._moveZ, -1)
self._addMovementCommand(140, 0, 0, self._moveZ, -10)
# Extrude/Retract
self._addMovementCommand(255, 80, 0, self._moveE, 10)
self._addMovementCommand(255, 180, 0, self._moveE, -10)
# Home
self._addMovementCommand(255, 255, 0, self._homeXYZ, None)
self._addMovementCommand(240, 255, 0, self._homeXYZ, "X")
self._addMovementCommand(220, 255, 0, self._homeXYZ, "Y")
self._addMovementCommand(200, 255, 0, self._homeXYZ, "Z")
self.powerWarningText = wx.StaticText(parent=self.toppanel,
id=-1,
label=_("Your computer is running on battery power.\nConnect your computer to AC power or your print might not finish."),
style=wx.ALIGN_CENTER)
self.powerWarningText.SetBackgroundColour('red')
self.powerWarningText.SetForegroundColour('white')
if power:
self.powerManagement = power.PowerManagement()
else:
self.powerManagement = None
self.powerWarningTimer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnPowerWarningChange, self.powerWarningTimer)
self.OnPowerWarningChange(None)
self.powerWarningTimer.Start(10000)
self.pauseTimer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnPauseTimer, self.pauseTimer)
self.connectButton = wx.Button(self.toppanel, -1, _("Connect"), size=(125, 30))
self.printButton = wx.Button(self.toppanel, -1, _("Print"), size=(125, 30))
self.cancelButton = wx.Button(self.toppanel, -1, _("Cancel"), size=(125, 30))
self.errorLogButton = wx.Button(self.toppanel, -1, _("Error log"), size=(125, 30))
self.motorsOffButton = wx.Button(self.toppanel, -1, _("Motors off"), size=(125, 30))
self.movementBitmap = wx.StaticBitmap(self.panel, -1, wx.BitmapFromImage(wx.Image(
resources.getPathForImage('print-window.png'))), (0, 0))
self.temperatureBitmap = wx.StaticBitmap(self.panel, -1, wx.BitmapFromImage(wx.Image(
resources.getPathForImage('print-window-temperature.png'))), (0, 0))
self.temperatureField = TemperatureField(self.panel, self._setHotendTemperature)
self.temperatureBedBitmap = wx.StaticBitmap(self.panel, -1, wx.BitmapFromImage(wx.Image(
resources.getPathForImage('print-window-temperature-bed.png'))), (0, 0))
self.temperatureBedField = TemperatureField(self.panel, self._setBedTemperature)
self.temperatureGraph = TemperatureGraph(self.panel)
self.temperatureGraph.SetMinSize((250, 100))
self.progress = wx.Gauge(self.panel, -1, range=1000)
f = wx.Font(8, wx.FONTFAMILY_MODERN, wx.FONTSTYLE_NORMAL, wx.FONTWEIGHT_NORMAL, False)
self._termLog = wx.TextCtrl(self.panel, style=wx.TE_MULTILINE)
self._termLog.SetFont(f)
self._termLog.SetEditable(0)
self._termLog.SetMinSize((385, -1))
self._termInput = wx.TextCtrl(self.panel, style=wx.TE_PROCESS_ENTER)
self._termInput.SetFont(f)
self.Bind(wx.EVT_TEXT_ENTER, self.OnTermEnterLine, self._termInput)
self._termInput.Bind(wx.EVT_CHAR, self.OnTermKey)
self.topsizer.Add(self.powerWarningText, pos=(0, 0), span=(1, 6), flag=wx.EXPAND|wx.BOTTOM, border=5)
self.topsizer.Add(self.connectButton, pos=(1, 0), flag=wx.LEFT, border=2)
self.topsizer.Add(self.printButton, pos=(1, 1), flag=wx.LEFT, border=2)
self.topsizer.Add(self.cancelButton, pos=(1, 2), flag=wx.LEFT, border=2)
self.topsizer.Add(self.errorLogButton, pos=(1, 4), flag=wx.LEFT, border=2)
self.topsizer.Add(self.motorsOffButton, pos=(1, 5), flag=wx.LEFT|wx.RIGHT, border=2)
self.sizer.Add(self.movementBitmap, pos=(0, 0), span=(2, 3))
self.sizer.Add(self.temperatureGraph, pos=(2, 0), span=(4, 2), flag=wx.EXPAND)
self.sizer.Add(self.temperatureBitmap, pos=(2, 2))
self.sizer.Add(self.temperatureField, pos=(3, 2))
self.sizer.Add(self.temperatureBedBitmap, pos=(4, 2))
self.sizer.Add(self.temperatureBedField, pos=(5, 2))
self.sizer.Add(self._termLog, pos=(0, 3), span=(5, 3), flag=wx.EXPAND|wx.RIGHT, border=5)
self.sizer.Add(self._termInput, pos=(5, 3), span=(1, 3), flag=wx.EXPAND|wx.RIGHT, border=5)
self.sizer.Add(self.progress, pos=(7, 0), span=(1, 6), flag=wx.EXPAND|wx.BOTTOM)
self.Bind(wx.EVT_SIZE, self.OnSize)
self.Bind(wx.EVT_CLOSE, self.OnClose)
self.movementBitmap.Bind(wx.EVT_LEFT_DOWN, self.OnMovementClick)
self.temperatureGraph.Bind(wx.EVT_LEFT_UP, self.OnTemperatureClick)
self.connectButton.Bind(wx.EVT_BUTTON, self.OnConnect)
self.printButton.Bind(wx.EVT_BUTTON, self.OnPrint)
self.cancelButton.Bind(wx.EVT_BUTTON, self.OnCancel)
self.errorLogButton.Bind(wx.EVT_BUTTON, self.OnErrorLog)
self.motorsOffButton.Bind(wx.EVT_BUTTON, self.OnMotorsOff)
self.Layout()
self.Fit()
self.Refresh()
self.progress.SetMinSize(self.progress.GetSize())
self._updateButtonStates()
self._printerConnection.addCallback(self._doPrinterConnectionUpdate)
if self._printerConnection.hasActiveConnection() and \
not self._printerConnection.isActiveConnectionOpen():
self._printerConnection.openActiveConnection()
def power_warning_level():
level = power.PowerManagement().get_low_battery_warning_level()
return POWER_WARNING_LEVEL_MAP[level]
def __init__(self):
super(printWindow, self).__init__(None, -1, title='Printing')
self.machineCom = None
self.gcode = None
self.gcodeList = None
self.sendList = []
self.temp = None
self.bedTemp = None
self.bufferLineCount = 4
self.sendCnt = 0
self.feedrateRatioOuterWall = 1.0
self.feedrateRatioInnerWall = 1.0
self.feedrateRatioFill = 1.0
self.feedrateRatioSupport = 1.0
self.pause = False
self.termHistory = []
self.termHistoryIdx = 0
self.cam = None
if webcam.hasWebcamSupport():
self.cam = webcam.webcam()
if not self.cam.hasCamera():
self.cam = None
self.SetSizer(wx.BoxSizer())
self.panel = wx.Panel(self)
self.GetSizer().Add(self.panel, 1, flag=wx.EXPAND)
self.sizer = wx.GridBagSizer(2, 2)
self.panel.SetSizer(self.sizer)
sb = wx.StaticBox(self.panel, label="Statistics")
boxsizer = wx.StaticBoxSizer(sb, wx.VERTICAL)
self.powerWarningText = wx.StaticText(
parent=self.panel,
id=-1,
label=
"Your computer is running on battery power.\nConnect your computer to AC power or your print might not finish.",
style=wx.ALIGN_CENTER)
self.powerWarningText.SetBackgroundColour('red')
self.powerWarningText.SetForegroundColour('white')
boxsizer.AddF(self.powerWarningText,
flags=wx.SizerFlags().Expand().Border(wx.BOTTOM, 10))
self.powerManagement = power.PowerManagement()
self.powerWarningTimer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnPowerWarningChange,
self.powerWarningTimer)
self.OnPowerWarningChange(None)
self.powerWarningTimer.Start(10000)
self.statsText = wx.StaticText(
self.panel, -1,
"Filament: ####.##m #.##g\nEstimated print time: #####:##\nMachine state:\nDetecting baudrateXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
)
boxsizer.Add(self.statsText, flag=wx.LEFT, border=5)
self.sizer.Add(boxsizer, pos=(0, 0), span=(7, 1), flag=wx.EXPAND)
self.connectButton = wx.Button(self.panel, -1, 'Connect')
#self.loadButton = wx.Button(self.panel, -1, 'Load')
self.printButton = wx.Button(self.panel, -1, 'Print')
self.pauseButton = wx.Button(self.panel, -1, 'Pause')
self.cancelButton = wx.Button(self.panel, -1, 'Cancel print')
self.machineLogButton = wx.Button(self.panel, -1, 'Error log')
self.progress = wx.Gauge(self.panel, -1)
self.sizer.Add(self.connectButton, pos=(1, 1), flag=wx.EXPAND)
#self.sizer.Add(self.loadButton, pos=(1,1), flag=wx.EXPAND)
self.sizer.Add(self.printButton, pos=(2, 1), flag=wx.EXPAND)
self.sizer.Add(self.pauseButton, pos=(3, 1), flag=wx.EXPAND)
self.sizer.Add(self.cancelButton, pos=(4, 1), flag=wx.EXPAND)
self.sizer.Add(self.machineLogButton, pos=(5, 1), flag=wx.EXPAND)
self.sizer.Add(self.progress, pos=(7, 0), span=(1, 7), flag=wx.EXPAND)
nb = wx.Notebook(self.panel)
self.sizer.Add(nb, pos=(0, 2), span=(7, 4), flag=wx.EXPAND)
self.temperaturePanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.temperaturePanel.SetSizer(sizer)
self.temperatureSelect = wx.SpinCtrl(self.temperaturePanel,
-1,
'0',
size=(21 * 3, 21),
style=wx.SP_ARROW_KEYS)
self.temperatureSelect.SetRange(0, 400)
self.bedTemperatureLabel = wx.StaticText(self.temperaturePanel, -1,
"BedTemp:")
self.bedTemperatureSelect = wx.SpinCtrl(self.temperaturePanel,
-1,
'0',
size=(21 * 3, 21),
style=wx.SP_ARROW_KEYS)
self.bedTemperatureSelect.SetRange(0, 400)
self.bedTemperatureLabel.Show(False)
self.bedTemperatureSelect.Show(False)
self.temperatureGraph = temperatureGraph(self.temperaturePanel)
sizer.Add(wx.StaticText(self.temperaturePanel, -1, "Temp:"),
pos=(0, 0))
sizer.Add(self.temperatureSelect, pos=(0, 1))
sizer.Add(self.bedTemperatureLabel, pos=(1, 0))
sizer.Add(self.bedTemperatureSelect, pos=(1, 1))
sizer.Add(self.temperatureGraph,
pos=(2, 0),
span=(1, 2),
flag=wx.EXPAND)
sizer.AddGrowableRow(2)
sizer.AddGrowableCol(1)
nb.AddPage(self.temperaturePanel, 'Temp')
self.directControlPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.directControlPanel.SetSizer(sizer)
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y100 F6000', 'G90'],
'print-move-y100.png'),
pos=(0, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y10 F6000', 'G90'],
'print-move-y10.png'),
pos=(1, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y1 F6000', 'G90'],
'print-move-y1.png'),
pos=(2, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-1 F6000', 'G90'],
'print-move-y-1.png'),
pos=(4, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-10 F6000', 'G90'],
'print-move-y-10.png'),
pos=(5, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-100 F6000', 'G90'],
'print-move-y-100.png'),
pos=(6, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-100 F6000', 'G90'],
'print-move-x-100.png'),
pos=(3, 0))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-10 F6000', 'G90'],
'print-move-x-10.png'),
pos=(3, 1))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-1 F6000', 'G90'],
'print-move-x-1.png'),
pos=(3, 2))
sizer.Add(PrintCommandButton(self, ['G28 X0 Y0'],
'print-move-home.png'),
pos=(3, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X1 F6000', 'G90'],
'print-move-x1.png'),
pos=(3, 4))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X10 F6000', 'G90'],
'print-move-x10.png'),
pos=(3, 5))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X100 F6000', 'G90'],
'print-move-x100.png'),
pos=(3, 6))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z10 F200', 'G90'],
'print-move-z10.png'),
pos=(0, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z1 F200', 'G90'],
'print-move-z1.png'),
pos=(1, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z0.1 F200', 'G90'],
'print-move-z0.1.png'),
pos=(2, 8))
sizer.Add(PrintCommandButton(self, ['G28 Z0'], 'print-move-home.png'),
pos=(3, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-0.1 F200', 'G90'],
'print-move-z-0.1.png'),
pos=(4, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-1 F200', 'G90'],
'print-move-z-1.png'),
pos=(5, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-10 F200', 'G90'],
'print-move-z-10.png'),
pos=(6, 8))
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E2 F120'],
'extrude.png',
size=(60, 20)),
pos=(1, 10),
span=(1, 3),
flag=wx.EXPAND)
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E-2 F120'],
'retract.png',
size=(60, 20)),
pos=(2, 10),
span=(1, 3),
flag=wx.EXPAND)
nb.AddPage(self.directControlPanel, 'Jog')
self.speedPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.speedPanel.SetSizer(sizer)
self.outerWallSpeedSelect = wx.SpinCtrl(self.speedPanel,
-1,
'100',
size=(21 * 3, 21),
style=wx.SP_ARROW_KEYS)
self.outerWallSpeedSelect.SetRange(5, 1000)
self.innerWallSpeedSelect = wx.SpinCtrl(self.speedPanel,
-1,
'100',
size=(21 * 3, 21),
style=wx.SP_ARROW_KEYS)
self.innerWallSpeedSelect.SetRange(5, 1000)
self.fillSpeedSelect = wx.SpinCtrl(self.speedPanel,
-1,
'100',
size=(21 * 3, 21),
style=wx.SP_ARROW_KEYS)
self.fillSpeedSelect.SetRange(5, 1000)
self.supportSpeedSelect = wx.SpinCtrl(self.speedPanel,
-1,
'100',
size=(21 * 3, 21),
style=wx.SP_ARROW_KEYS)
self.supportSpeedSelect.SetRange(5, 1000)
sizer.Add(wx.StaticText(self.speedPanel, -1, "Outer wall:"),
pos=(0, 0))
sizer.Add(self.outerWallSpeedSelect, pos=(0, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(0, 2))
sizer.Add(wx.StaticText(self.speedPanel, -1, "Inner wall:"),
pos=(1, 0))
sizer.Add(self.innerWallSpeedSelect, pos=(1, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(1, 2))
sizer.Add(wx.StaticText(self.speedPanel, -1, "Fill:"), pos=(2, 0))
sizer.Add(self.fillSpeedSelect, pos=(2, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(2, 2))
sizer.Add(wx.StaticText(self.speedPanel, -1, "Support:"), pos=(3, 0))
sizer.Add(self.supportSpeedSelect, pos=(3, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(3, 2))
nb.AddPage(self.speedPanel, 'Speed')
self.termPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.termPanel.SetSizer(sizer)
f = wx.Font(8, wx.FONTFAMILY_MODERN, wx.FONTSTYLE_NORMAL,
wx.FONTWEIGHT_NORMAL, False)
self.termLog = wx.TextCtrl(self.termPanel,
style=wx.TE_MULTILINE | wx.TE_DONTWRAP)
self.termLog.SetFont(f)
self.termLog.SetEditable(0)
self.termInput = wx.TextCtrl(self.termPanel, style=wx.TE_PROCESS_ENTER)
self.termInput.SetFont(f)
sizer.Add(self.termLog, pos=(0, 0), flag=wx.EXPAND)
sizer.Add(self.termInput, pos=(1, 0), flag=wx.EXPAND)
sizer.AddGrowableCol(0)
sizer.AddGrowableRow(0)
nb.AddPage(self.termPanel, 'Term')
if self.cam is not None:
self.camPage = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.camPage.SetSizer(sizer)
self.timelapsEnable = wx.CheckBox(
self.camPage, -1, 'Enable timelapse movie recording')
sizer.Add(self.timelapsEnable,
pos=(0, 0),
span=(1, 2),
flag=wx.EXPAND)
pages = self.cam.propertyPages()
self.cam.buttons = [self.timelapsEnable]
for page in pages:
button = wx.Button(self.camPage, -1, page)
button.index = pages.index(page)
sizer.Add(button, pos=(1, pages.index(page)))
button.Bind(wx.EVT_BUTTON, self.OnPropertyPageButton)
self.cam.buttons.append(button)
self.campreviewEnable = wx.CheckBox(self.camPage, -1,
'Show preview')
sizer.Add(self.campreviewEnable,
pos=(2, 0),
span=(1, 2),
flag=wx.EXPAND)
self.camPreview = wx.Panel(self.camPage)
sizer.Add(self.camPreview, pos=(3, 0), span=(1, 2), flag=wx.EXPAND)
nb.AddPage(self.camPage, 'Camera')
self.camPreview.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnCameraTimer, self.camPreview.timer)
self.camPreview.timer.Start(500)
self.camPreview.Bind(wx.EVT_ERASE_BACKGROUND,
self.OnCameraEraseBackground)
self.sizer.AddGrowableRow(6)
self.sizer.AddGrowableCol(3)
self.Bind(wx.EVT_CLOSE, self.OnClose)
self.connectButton.Bind(wx.EVT_BUTTON, self.OnConnect)
#self.loadButton.Bind(wx.EVT_BUTTON, self.OnLoad)
self.printButton.Bind(wx.EVT_BUTTON, self.OnPrint)
self.pauseButton.Bind(wx.EVT_BUTTON, self.OnPause)
self.cancelButton.Bind(wx.EVT_BUTTON, self.OnCancel)
self.machineLogButton.Bind(wx.EVT_BUTTON, self.OnMachineLog)
self.Bind(wx.EVT_SPINCTRL, self.OnTempChange, self.temperatureSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnBedTempChange,
self.bedTemperatureSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange,
self.outerWallSpeedSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange,
self.innerWallSpeedSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange, self.fillSpeedSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange, self.supportSpeedSelect)
self.Bind(wx.EVT_TEXT_ENTER, self.OnTermEnterLine, self.termInput)
self.termInput.Bind(wx.EVT_CHAR, self.OnTermKey)
self.Layout()
self.Fit()
self.Centre()
self.statsText.SetMinSize(self.statsText.GetSize())
self.UpdateButtonStates()
def testGetRemainingPercentage(self):
rem_percentage = power.PowerManagement().get_remaining_percentage()
self.assertIsNotNone(rem_percentage)
self.assertIsInstance(rem_percentage, float)
self.assertTrue(rem_percentage >= 0 and rem_percentage <= 100)
import power
import time
import notify2
from notify2 import Notification
notify2.init("Charger Warning")
n = Notification("WARNING", "Laptop running on battery. Plug in charger!")
n.set_urgency(notify2.URGENCY_CRITICAL)
while (True):
source = power.PowerManagement().get_providing_power_source_type()
if source == power.POWER_TYPE_BATTERY:
n.show()
print('NOT CHARGING!')
else:
print('CHARGING')
time.sleep(300)
def __init__(self):
print("Starting System Monitor")
self.root = Tk()
self.root.title('System Monitor')
self.root.iconbitmap('@sysmonitor.xbm')
# self.root.geometry("600x300+150+150")
#NoteBook
self.n = Notebook(self.root)
self.f1 = Frame(self.n) # CPU Usage
self.f2 = Frame(self.n) # Memory
self.f3 = Frame(self.n) # Sensors
self.f4 = Frame(self.n) # Graph
self.f5 = Frame(self.n) # Processes
self.n.add(self.f1, text='CPU Usage')
self.n.add(self.f2, text='Memory')
self.n.add(self.f3, text='Sensors')
self.n.add(self.f4, text='Graph')
self.n.add(self.f5, text='Processes')
self.n.pack(fill=BOTH)
################################################### CPU USAGE ######################################################
#Current CPU usage
self.cur_cpu = pc.cpu_percent()
self.cpu_arr = deque()
self.cpu_arr.append(self.cur_cpu)
#Progress Bar to show current CPU usage
self.cpu_bar = Progressbar(self.f1,
length=300,
value=self.cur_cpu,
mode="determinate")
self.cpu_bar.pack(padx=5, pady=5, fill=BOTH)
#Variable string to store current CPU usage
self.cpu_percent = StringVar()
self.cpu_percent.set("CPU Usage: " + str(self.cur_cpu) + " %")
self.cpu_percent_label = Label(self.f1, textvariable=self.cpu_percent)
self.cpu_percent_label.place(relx=0.5, rely=0.2, anchor=CENTER)
self.cpu_freq = pc.cpu_freq()
self.cpu_freq_val = StringVar()
self.cpu_freq_val.set(
str("Current CPU Freq: " + str(int(self.cpu_freq[0])) + "/" +
str(int(self.cpu_freq[2])) + " MHz"))
self.cpu_freq_label = Label(self.f1, textvariable=self.cpu_freq_val)
self.cpu_freq_label.place(relx=0.5, rely=0.3, anchor=CENTER)
self.cpu_count_label = Label(self.f1,
text="Number of CPUs: " +
str(pc.cpu_count()))
self.cpu_count_label.place(relx=0.5, rely=0.4, anchor=CENTER)
self.pid = pc.pids()
self.pid_val = StringVar()
self.pid_val.set(str("Total Running Processes: " + str(len(self.pid))))
self.pid_label = Label(self.f1, textvariable=self.pid_val)
self.pid_label.place(relx=0.5, rely=0.5, anchor=CENTER)
###################################################### MEMORY ####################################################
self.ram = pc.virtual_memory()
self.swap = pc.swap_memory()
self.disk = pc.disk_usage('/home')
self.ram_percent = self.ram[2]
self.swap_percent = self.swap[3]
self.disk_percent = self.disk[3]
self.memory_window = Panedwindow(self.f2, orient=VERTICAL)
self.memory_frame1 = Labelframe(self.memory_window,
text='RAM',
width=100,
height=100)
self.memory_frame2 = Labelframe(self.memory_window,
text='Swap',
width=100,
height=100)
self.memory_frame3 = Labelframe(self.memory_window,
text='Disk',
width=100,
height=100)
self.memory_window.add(self.memory_frame1)
self.memory_window.add(self.memory_frame2)
self.memory_window.add(self.memory_frame3)
# RAM Used
self.ram_bar = Progressbar(self.memory_frame1,
length=300,
value=self.ram_percent,
mode="determinate")
self.ram_bar.pack(padx=5, pady=5, fill=BOTH)
self.ram_val = StringVar()
self.ram_val.set("Ram Used: " + str(self.ram_percent) + "%")
self.ram_label = Label(self.memory_frame1, textvariable=self.ram_val)
self.ram_label.pack(side=LEFT, fill=BOTH)
#Swap Used
self.swap_bar = Progressbar(self.memory_frame2,
length=300,
value=self.swap_percent,
mode="determinate")
self.swap_bar.pack(padx=5, pady=5, fill=BOTH)
self.swap_val = StringVar()
self.swap_val.set("Swap Used: " + str(self.swap_percent) + "%")
self.swap_label = Label(self.memory_frame2, textvariable=self.swap_val)
self.swap_label.pack(side=LEFT, fill=BOTH)
#Disk Space Used
self.disk_bar = Progressbar(self.memory_frame3,
length=300,
value=self.disk_percent,
mode="determinate")
self.disk_bar.pack(padx=5, pady=5, fill=BOTH)
self.disk_val = StringVar()
self.disk_val.set("Disk Used: " + str(self.disk_percent) + "%")
self.disk_label = Label(self.memory_frame3, textvariable=self.disk_val)
self.disk_label.pack(side=LEFT, fill=BOTH)
self.memory_frame1.pack(fill=BOTH)
self.memory_frame2.pack(fill=BOTH)
self.memory_frame3.pack(fill=BOTH)
self.memory_window.pack(fill=BOTH)
###################################################### SENSORS #####################################################
#Current Sensor Values
self.temperature = pc.sensors_temperatures()
self.battery = pc.sensors_battery()
self.battery_estimate = ""
self.power_source = ""
source = power.PowerManagement().get_providing_power_source_type()
if (source == power.POWER_TYPE_AC):
self.power_source = "AC"
elif (source == power.POWER_TYPE_BATTERY):
self.power_source = "BATTERY"
elif (source == power.POWER_TYPE_UPS):
self.power_source = "UPS"
else:
self.power_source = "UNKNOWN"
self.temp_cur = self.temperature['coretemp'][0][1]
self.temp_critical = self.temperature['coretemp'][0][3]
self.sensor_window = Panedwindow(self.f3, orient=VERTICAL)
self.sensor_frame1 = Labelframe(self.sensor_window,
text='Temperature',
width=100,
height=100)
self.sensor_frame2 = Labelframe(self.sensor_window,
text='Battery',
width=100,
height=100)
self.sensor_window.add(self.sensor_frame1)
self.sensor_window.add(self.sensor_frame2)
#Progress Bar to show current temperature
self.temp_bar = Progressbar(self.sensor_frame1,
length=300,
value=self.temp_cur,
mode="determinate",
maximum=self.temp_critical)
self.temp_bar.pack(padx=5, pady=5, fill=BOTH)
#Temperature
self.cur_temp = StringVar()
self.cur_temp.set("cur_temp: " + str(self.temp_cur) + "`C")
self.cur_temp_label = Label(self.sensor_frame1,
textvariable=self.cur_temp)
self.cur_temp_label.pack(side=LEFT, fill=BOTH)
self.label_temp = Label(self.sensor_frame1,
text="critical_temp: " +
str(self.temp_critical) + "\u2103")
self.label_temp.pack(side=RIGHT, fill=BOTH)
#Battery Status
self.batt_estimate = StringVar()
self.batt_estimate.set("Battery Estimate: " +
str(self.battery_estimate))
self.batt_estimate_label = Label(self.sensor_frame2,
textvariable=self.batt_estimate)
self.batt_estimate_label.pack(fill=BOTH)
self.label_batt_type = Label(self.sensor_frame2,
text="Power Source: " + self.power_source)
self.label_batt_type.pack(side=LEFT, fill=BOTH)
self.sensor_frame1.pack(fill=BOTH)
self.sensor_frame2.pack(side=LEFT, fill=BOTH)
self.sensor_window.pack(fill=BOTH)
################################################### GRAPH ##########################################################
#Graph Variables
self.fig = Figure(figsize=(0.1, 0.1))
ax = self.fig.add_subplot(111)
self.line, = ax.plot(range(50))
ax.axis([0, 50, 0, 100])
ax.set_title("CPU Usage", fontsize=12)
ax.set_ylabel("Percentage", fontsize=10)
ax.set_xlabel("Time", fontsize=10)
self.canvas = FigureCanvasTkAgg(self.fig, master=self.f4)
self.canvas.show()
self.canvas.get_tk_widget().pack(side='top',
fill=BOTH,
expand=1,
ipadx=180)
############################################### PROCESSES ##########################################################
self.kill_process_id = 0
self.scrollbar = Scrollbar(self.f5)
self.scrollbar.pack(side=RIGHT, fill=Y)
self.update_button = Button(self.f5,
text="Update",
command=self.update_processes)
self.update_button.pack(side=TOP)
tv = Treeview(self.f5)
tv['columns'] = ('cpu', 'id', 'status')
tv.heading("#0", text='Process Name', anchor='w')
tv.column("#0", anchor="w", width=75)
tv.heading('cpu', text='% CPU')
tv.column('cpu', anchor='center', width=40)
tv.heading('id', text='PID')
tv.column('id', anchor='center', width=35)
tv.heading('status', text='Status')
tv.column('status', anchor='center', width=40)
tv.pack(fill=BOTH)
self.treeview = tv
tv.tag_configure('active', background='green')
# attach listbox to scrollbar
self.treeview.config(yscrollcommand=self.scrollbar.set)
self.scrollbar.config(command=self.treeview.yview)
self.pMenu = Menu(self.f5, tearoff=0)
self.pMenu.add_command(label="Kill Process", command=self.kill_process)
self.pMenu.add_command(label="Kill Process Tree",
command=self.kill_process_tree)
self.pMenu.add_command(label="Cancel")
self.treeview.bind("<Button-3>", self.process_popup)
self.treeview.bind("<Button-2>", self.process_popup)
################################################### UPDATE #########################################################
#Call Update() after 100 ms
self.job1 = self.f1.after(1000, self.update_cpu)
self.job2 = self.f2.after(1000, self.update_memory)
self.job3 = self.f3.after(1000, self.update_sensors)
self.job4 = self.f4.after(1000, self.update_graph)
self.job5 = self.f5.after(1000, self.update_processes)
#The Main Loop
self.root.mainloop()
#Kill everything once the window is closed.
print("Killing everything.")
self.f1.after_cancel(self.job1)
self.f2.after_cancel(self.job2)
self.f3.after_cancel(self.job3)
self.f4.after_cancel(self.job4)
self.f5.after_cancel(self.job5)
print("Good Bye!")
sys.exit()
