def createPoint(self, pX, pY, geoTransform, writer, feature):
(x, y) = raster.pixelToMap(pX, pY, geoTransform)
feature.setGeometry(QgsGeometry.fromPointXY(QgsPointXY(x, y)))
feature['id'] = self.fid
feature['line_id'] = self.lineId
feature['point_id'] = self.pointId
self.fid += 1
self.pointId += 1
writer.addFeature(feature, QgsFeatureSink.FastInsert)
def createPoint(self, pX, pY, geoTransform, writer, feature):
x, y = raster.pixelToMap(pX, pY, geoTransform)
feature.setGeometry(QgsGeometry.fromPoint(QgsPoint(x, y)))
feature["id"] = self.fid
feature["line_id"] = self.lineId
feature["point_id"] = self.pointId
self.fid += 1
self.pointId +=1
writer.addFeature(feature)
def createPoint(self, pX, pY, geoTransform, writer, feature):
(x, y) = raster.pixelToMap(pX, pY, geoTransform)
feature.setGeometry(QgsGeometry.fromPoint(QgsPointXY(x, y)))
feature['id'] = self.fid
feature['line_id'] = self.lineId
feature['point_id'] = self.pointId
self.fid += 1
self.pointId += 1
writer.addFeature(feature, QgsFeatureSink.FastInsert)
def processAlgorithm(self, parameters, context, feedback):
source = self.parameterAsSource(parameters, self.INPUT_VECTOR, context)
if source is None:
raise QgsProcessingException(self.invalidSourceError(parameters, self.INPUT_VECTOR))
raster_layer = self.parameterAsRasterLayer(parameters, self.INPUT_RASTER, context)
rasterPath = raster_layer.source()
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
fields = QgsFields()
fields.append(QgsField('id', QVariant.Int, '', 10, 0))
fields.append(QgsField('poly_id', QVariant.Int, '', 10, 0))
fields.append(QgsField('point_id', QVariant.Int, '', 10, 0))
(sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT, context,
fields, QgsWkbTypes.Point, raster_layer.crs())
if sink is None:
raise QgsProcessingException(self.invalidSinkError(parameters, self.OUTPUT))
outFeature = QgsFeature()
outFeature.setFields(fields)
fid = 0
polyId = 0
pointId = 0
features = source.getFeatures(QgsFeatureRequest().setDestinationCrs(raster_layer.crs(), context.transformContext()))
total = 100.0 / source.featureCount() if source.featureCount() else 0
for current, f in enumerate(features):
if feedback.isCanceled():
break
if not f.hasGeometry():
continue
geom = f.geometry()
bbox = geom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startRow, startColumn) = raster.mapToPixel(xMin, yMax, geoTransform)
(endRow, endColumn) = raster.mapToPixel(xMax, yMin, geoTransform)
# use prepared geometries for faster intersection tests
engine = QgsGeometry.createGeometryEngine(geom.constGet())
engine.prepareGeometry()
for row in range(startRow, endRow + 1):
for col in range(startColumn, endColumn + 1):
if feedback.isCanceled():
break
(x, y) = raster.pixelToMap(row, col, geoTransform)
point = QgsPoint(x, y)
if engine.contains(point):
outFeature.setGeometry(QgsGeometry(point))
outFeature['id'] = fid
outFeature['poly_id'] = polyId
outFeature['point_id'] = pointId
fid += 1
pointId += 1
sink.addFeature(outFeature, QgsFeatureSink.FastInsert)
pointId = 0
polyId += 1
feedback.setProgress(int(current * total))
return {self.OUTPUT: dest_id}
def processAlgorithm(self, parameters, context, feedback):
source = self.parameterAsSource(parameters, self.INPUT_VECTOR, context)
if source is None:
raise QgsProcessingException(self.invalidSourceError(parameters, self.INPUT_VECTOR))
raster_layer = self.parameterAsRasterLayer(parameters, self.INPUT_RASTER, context)
rasterPath = raster_layer.source()
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
fields = QgsFields()
fields.append(QgsField('id', QVariant.Int, '', 10, 0))
fields.append(QgsField('poly_id', QVariant.Int, '', 10, 0))
fields.append(QgsField('point_id', QVariant.Int, '', 10, 0))
(sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT, context,
fields, QgsWkbTypes.Point, raster_layer.crs())
if sink is None:
raise QgsProcessingException(self.invalidSinkError(parameters, self.OUTPUT))
outFeature = QgsFeature()
outFeature.setFields(fields)
fid = 0
polyId = 0
pointId = 0
features = source.getFeatures(QgsFeatureRequest().setDestinationCrs(raster_layer.crs(), context.transformContext()))
total = 100.0 / source.featureCount() if source.featureCount() else 0
for current, f in enumerate(features):
if feedback.isCanceled():
break
if not f.hasGeometry():
continue
geom = f.geometry()
bbox = geom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startRow, startColumn) = raster.mapToPixel(xMin, yMax, geoTransform)
(endRow, endColumn) = raster.mapToPixel(xMax, yMin, geoTransform)
# use prepared geometries for faster intersection tests
engine = QgsGeometry.createGeometryEngine(geom.constGet())
engine.prepareGeometry()
for row in range(startRow, endRow + 1):
for col in range(startColumn, endColumn + 1):
if feedback.isCanceled():
break
(x, y) = raster.pixelToMap(row, col, geoTransform)
point = QgsPoint(x, y)
if engine.contains(point):
outFeature.setGeometry(QgsGeometry(point))
outFeature['id'] = fid
outFeature['poly_id'] = polyId
outFeature['point_id'] = pointId
fid += 1
pointId += 1
sink.addFeature(outFeature, QgsFeatureSink.FastInsert)
pointId = 0
polyId += 1
feedback.setProgress(int(current * total))
return {self.OUTPUT: dest_id}
def processAlgorithm(self, feedback):
layer = dataobjects.getObjectFromUri(
self.getParameterValue(self.INPUT_VECTOR))
rasterPath = str(self.getParameterValue(self.INPUT_RASTER))
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterDS = None
fields = QgsFields()
fields.append(QgsField('id', QVariant.Int, '', 10, 0))
fields.append(QgsField('poly_id', QVariant.Int, '', 10, 0))
fields.append(QgsField('point_id', QVariant.Int, '', 10, 0))
writer = self.getOutputFromName(self.OUTPUT_LAYER).getVectorWriter(
fields.toList(), QgsWkbTypes.Point, layer.crs())
outFeature = QgsFeature()
outFeature.setFields(fields)
fid = 0
polyId = 0
pointId = 0
features = vector.features(layer)
total = 100.0 / len(features)
for current, f in enumerate(features):
geom = f.geometry()
bbox = geom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startRow,
startColumn) = raster.mapToPixel(xMin, yMax, geoTransform)
(endRow, endColumn) = raster.mapToPixel(xMax, yMin, geoTransform)
# use prepared geometries for faster intersection tests
engine = QgsGeometry.createGeometryEngine(geom.geometry())
engine.prepareGeometry()
for row in range(startRow, endRow + 1):
for col in range(startColumn, endColumn + 1):
(x, y) = raster.pixelToMap(row, col, geoTransform)
point = QgsPointV2()
point.setX(x)
point.setY(y)
if engine.contains(point):
outFeature.setGeometry(QgsGeometry(point))
outFeature['id'] = fid
outFeature['poly_id'] = polyId
outFeature['point_id'] = pointId
fid += 1
pointId += 1
writer.addFeature(outFeature)
pointId = 0
polyId += 1
feedback.setProgress(int(current * total))
del writer
def processAlgorithm(self, progress):
layer = dataobjects.getObjectFromUri(
self.getParameterValue(self.INPUT_VECTOR))
rasterPath = unicode(self.getParameterValue(self.INPUT_RASTER))
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterDS = None
fields = QgsFields()
fields.append(QgsField('id', QVariant.Int, '', 10, 0))
fields.append(QgsField('poly_id', QVariant.Int, '', 10, 0))
fields.append(QgsField('point_id', QVariant.Int, '', 10, 0))
writer = self.getOutputFromName(
self.OUTPUT_LAYER).getVectorWriter(fields.toList(),
QGis.WKBPoint,
layer.crs())
outFeature = QgsFeature()
outFeature.setFields(fields)
point = QgsPoint()
fid = 0
polyId = 0
pointId = 0
current = 0
features = vector.features(layer)
total = 100.0 / len(features)
for f in features:
geom = f.geometry()
bbox = geom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startRow, startColumn) = raster.mapToPixel(xMin, yMax, geoTransform)
(endRow, endColumn) = raster.mapToPixel(xMax, yMin, geoTransform)
for row in xrange(startRow, endRow + 1):
for col in xrange(startColumn, endColumn + 1):
(x, y) = raster.pixelToMap(row, col, geoTransform)
point.setX(x)
point.setY(y)
if geom.contains(point):
outFeature.setGeometry(QgsGeometry.fromPoint(point))
outFeature['id'] = fid
outFeature['poly_id'] = polyId
outFeature['point_id'] = pointId
fid += 1
pointId += 1
writer.addFeature(outFeature)
pointId = 0
polyId += 1
current += 1
progress.setPercentage(int(current * total))
del writer
def processAlgorithm(self, parameters, context, feedback):
layer = QgsProcessingUtils.mapLayerFromString(self.getParameterValue(self.INPUT_VECTOR), context)
rasterPath = str(self.getParameterValue(self.INPUT_RASTER))
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterDS = None
fields = QgsFields()
fields.append(QgsField('id', QVariant.Int, '', 10, 0))
fields.append(QgsField('poly_id', QVariant.Int, '', 10, 0))
fields.append(QgsField('point_id', QVariant.Int, '', 10, 0))
writer = self.getOutputFromName(self.OUTPUT_LAYER).getVectorWriter(fields, QgsWkbTypes.Point,
layer.crs(), context)
outFeature = QgsFeature()
outFeature.setFields(fields)
fid = 0
polyId = 0
pointId = 0
features = QgsProcessingUtils.getFeatures(layer, context)
total = 100.0 / layer.featureCount() if layer.featureCount() else 0
for current, f in enumerate(features):
geom = f.geometry()
bbox = geom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startRow, startColumn) = raster.mapToPixel(xMin, yMax, geoTransform)
(endRow, endColumn) = raster.mapToPixel(xMax, yMin, geoTransform)
# use prepared geometries for faster intersection tests
engine = QgsGeometry.createGeometryEngine(geom.geometry())
engine.prepareGeometry()
for row in range(startRow, endRow + 1):
for col in range(startColumn, endColumn + 1):
(x, y) = raster.pixelToMap(row, col, geoTransform)
point = QgsPointXY()
point.setX(x)
point.setY(y)
if engine.contains(point):
outFeature.setGeometry(QgsGeometry(point))
outFeature['id'] = fid
outFeature['poly_id'] = polyId
outFeature['point_id'] = pointId
fid += 1
pointId += 1
writer.addFeature(outFeature, QgsFeatureSink.FastInsert)
pointId = 0
polyId += 1
feedback.setProgress(int(current * total))
del writer
