def add_axes(self, *args, **kwargs):
"""
Add an a axes with axes rect [*left*, *bottom*, *width*,
*height*] where all quantities are in fractions of figure
width and height. kwargs are legal
:class:`~matplotlib.axes.Axes` kwargs plus *projection* which
sets the projection type of the axes. (For backward
compatibility, ``polar=True`` may also be provided, which is
equivalent to ``projection='polar'``). Valid values for
*projection* are: %(projection_names)s. Some of these projections support
additional kwargs, which may be provided to :meth:`add_axes`::
rect = l,b,w,h
fig.add_axes(rect)
fig.add_axes(rect, frameon=False, axisbg='g')
fig.add_axes(rect, polar=True)
fig.add_axes(rect, projection='polar')
fig.add_axes(ax) # add an Axes instance
If the figure already has an axes with the same parameters,
then it will simply make that axes current and return it. If
you do not want this behavior, eg. you want to force the
creation of a new axes, you must use a unique set of args and
kwargs. The axes :attr:`~matplotlib.axes.Axes.label`
attribute has been exposed for this purpose. Eg., if you want
two axes that are otherwise identical to be added to the
figure, make sure you give them unique labels::
fig.add_axes(rect, label='axes1')
fig.add_axes(rect, label='axes2')
The :class:`~matplotlib.axes.Axes` instance will be returned.
The following kwargs are supported:
%(Axes)s
"""
key = self._make_key(*args, **kwargs)
if key in self._seen:
ax = self._seen[key]
self.sca(ax)
return ax
if not len(args):
return
if isinstance(args[0], Axes):
a = args[0]
assert a.get_figure() is self
else:
rect = args[0]
ispolar = kwargs.pop("polar", False)
projection = kwargs.pop("projection", None)
if ispolar:
if projection is not None and projection != "polar":
raise ValueError(
"polar=True, yet projection='%s'. "
+ "Only one of these arguments should be supplied." % projection
)
projection = "polar"
a = projection_factory(projection, self, rect, **kwargs)
self.axes.append(a)
self._axstack.push(a)
self.sca(a)
self._seen[key] = a
return a
def add_axes(self, *args, **kwargs):
"""
Add an axes at position *rect* [*left*, *bottom*, *width*,
*height*] where all quantities are in fractions of figure
width and height. kwargs are legal
:class:`~matplotlib.axes.Axes` kwargs plus *projection* which
sets the projection type of the axes. (For backward
compatibility, ``polar=True`` may also be provided, which is
equivalent to ``projection='polar'``). Valid values for
*projection* are: %(projection_names)s. Some of these
projections support additional kwargs, which may be provided
to :meth:`add_axes`. Typical usage::
rect = l,b,w,h
fig.add_axes(rect)
fig.add_axes(rect, frameon=False, axisbg='g')
fig.add_axes(rect, polar=True)
fig.add_axes(rect, projection='polar')
fig.add_axes(ax)
If the figure already has an axes with the same parameters,
then it will simply make that axes current and return it. If
you do not want this behavior, e.g. you want to force the
creation of a new Axes, you must use a unique set of args and
kwargs. The axes :attr:`~matplotlib.axes.Axes.label`
attribute has been exposed for this purpose. Eg., if you want
two axes that are otherwise identical to be added to the
figure, make sure you give them unique labels::
fig.add_axes(rect, label='axes1')
fig.add_axes(rect, label='axes2')
In rare circumstances, add_axes may be called with a single
argument, an Axes instance already created in the present
figure but not in the figure's list of axes. For example,
if an axes has been removed with :meth:`delaxes`, it can
be restored with::
fig.add_axes(ax)
In all cases, the :class:`~matplotlib.axes.Axes` instance
will be returned.
In addition to *projection*, the following kwargs are supported:
%(Axes)s
"""
if not len(args): return
key = self._make_key(*args, **kwargs)
ax = self._axstack.get(key)
if ax is not None:
self.sca(ax)
return ax
if isinstance(args[0], Axes):
a = args[0]
assert (a.get_figure() is self)
else:
rect = args[0]
ispolar = kwargs.pop('polar', False)
projection = kwargs.pop('projection', None)
if ispolar:
if projection is not None and projection != 'polar':
raise ValueError(
"polar=True, yet projection='%s'. " +
"Only one of these arguments should be supplied." %
projection)
projection = 'polar'
a = projection_factory(projection, self, rect, **kwargs)
self._axstack.add(key, a)
self.sca(a)
return a
def add_axes(self, *args, **kwargs):
"""
Add an axes at position *rect* [*left*, *bottom*, *width*,
*height*] where all quantities are in fractions of figure
width and height. kwargs are legal
:class:`~matplotlib.axes.Axes` kwargs plus *projection* which
sets the projection type of the axes. (For backward
compatibility, ``polar=True`` may also be provided, which is
equivalent to ``projection='polar'``). Valid values for
*projection* are: %(projection_names)s. Some of these
projections support additional kwargs, which may be provided
to :meth:`add_axes`. Typical usage::
rect = l,b,w,h
fig.add_axes(rect)
fig.add_axes(rect, frameon=False, axisbg='g')
fig.add_axes(rect, polar=True)
fig.add_axes(rect, projection='polar')
fig.add_axes(ax)
If the figure already has an axes with the same parameters,
then it will simply make that axes current and return it. If
you do not want this behavior, e.g. you want to force the
creation of a new Axes, you must use a unique set of args and
kwargs. The axes :attr:`~matplotlib.axes.Axes.label`
attribute has been exposed for this purpose. Eg., if you want
two axes that are otherwise identical to be added to the
figure, make sure you give them unique labels::
fig.add_axes(rect, label='axes1')
fig.add_axes(rect, label='axes2')
In rare circumstances, add_axes may be called with a single
argument, an Axes instance already created in the present
figure but not in the figure's list of axes. For example,
if an axes has been removed with :meth:`delaxes`, it can
be restored with::
fig.add_axes(ax)
In all cases, the :class:`~matplotlib.axes.Axes` instance
will be returned.
In addition to *projection*, the following kwargs are supported:
%(Axes)s
"""
if not len(args): return
key = self._make_key(*args, **kwargs)
ax = self._axstack.get(key)
if ax is not None:
self.sca(ax)
return ax
if isinstance(args[0], Axes):
a = args[0]
assert(a.get_figure() is self)
else:
rect = args[0]
ispolar = kwargs.pop('polar', False)
projection = kwargs.pop('projection', None)
if ispolar:
if projection is not None and projection != 'polar':
raise ValueError(
"polar=True, yet projection='%s'. " +
"Only one of these arguments should be supplied." %
projection)
projection = 'polar'
a = projection_factory(projection, self, rect, **kwargs)
self._axstack.add(key, a)
self.sca(a)
return a
def add_axes(self, *args, **kwargs):
"""
Add an a axes with axes rect [*left*, *bottom*, *width*,
*height*] where all quantities are in fractions of figure
width and height. kwargs are legal
:class:`~matplotlib.axes.Axes` kwargs plus *projection* which
sets the projection type of the axes. (For backward
compatibility, ``polar=True`` may also be provided, which is
equivalent to ``projection='polar'``). Valid values for
*projection* are: %(list)s. Some of these projections support
additional kwargs, which may be provided to :meth:`add_axes`::
rect = l,b,w,h
fig.add_axes(rect)
fig.add_axes(rect, frameon=False, axisbg='g')
fig.add_axes(rect, polar=True)
fig.add_axes(rect, projection='polar')
fig.add_axes(ax) # add an Axes instance
If the figure already has an axes with the same parameters,
then it will simply make that axes current and return it. If
you do not want this behavior, eg. you want to force the
creation of a new axes, you must use a unique set of args and
kwargs. The axes :attr:`~matplotlib.axes.Axes.label`
attribute has been exposed for this purpose. Eg., if you want
two axes that are otherwise identical to be added to the
figure, make sure you give them unique labels::
fig.add_axes(rect, label='axes1')
fig.add_axes(rect, label='axes2')
The :class:`~matplotlib.axes.Axes` instance will be returned.
The following kwargs are supported:
%(Axes)s
"""
key = self._make_key(*args, **kwargs)
if key in self._seen:
ax = self._seen[key]
self.sca(ax)
return ax
if not len(args): return
if isinstance(args[0], Axes):
a = args[0]
assert (a.get_figure() is self)
else:
rect = args[0]
ispolar = kwargs.pop('polar', False)
projection = kwargs.pop('projection', None)
if ispolar:
if projection is not None and projection != 'polar':
raise ValueError(
"polar=True, yet projection='%s'. " +
"Only one of these arguments should be supplied." %
projection)
projection = 'polar'
a = projection_factory(projection, self, rect, **kwargs)
self.axes.append(a)
self._axstack.push(a)
self.sca(a)
self._seen[key] = a
return a
def add_axes(self, *args, **kwargs):
"""
Add an a axes with axes rect [left, bottom, width, height] where all
quantities are in fractions of figure width and height. kwargs are
legal Axes kwargs plus "projection" which sets the projection type
of the axes. (For backward compatibility, polar=True may also be
provided, which is equivalent to projection='polar').
Valid values for "projection" are: %s. Some of these projections
support additional kwargs, which may be provided to add_axes.
rect = l,b,w,h
add_axes(rect)
add_axes(rect, frameon=False, axisbg='g')
add_axes(rect, polar=True)
add_axes(rect, projection='polar')
add_axes(ax) # add an Axes instance
If the figure already has an axes with key *args, *kwargs then it will
simply make that axes current and return it. If you do not want this
behavior, eg you want to force the creation of a new axes, you must
use a unique set of args and kwargs. The artist "label" attribute has
been exposed for this purpose. Eg, if you want two axes that are
otherwise identical to be added to the figure, make sure you give them
unique labels:
add_axes(rect, label='axes1')
add_axes(rect, label='axes2')
The Axes instance will be returned
The following kwargs are supported:
%s
""" % (", ".join(get_projection_names()), '%(Axes)s')
key = self._make_key(*args, **kwargs)
if self._seen.has_key(key):
ax = self._seen[key]
self.sca(ax)
return ax
if not len(args): return
if isinstance(args[0], Axes):
a = args[0]
assert (a.get_figure() is self)
else:
rect = args[0]
ispolar = kwargs.pop('polar', False)
projection = kwargs.pop('projection', None)
if ispolar:
if projection is not None and projection != 'polar':
raise ValueError(
"polar=True, yet projection='%s'. " +
"Only one of these arguments should be supplied." %
projection)
projection = 'polar'
a = projection_factory(projection, self, rect, **kwargs)
self.axes.append(a)
self._axstack.push(a)
self.sca(a)
self._seen[key] = a
return a
def add_axes(self, *args, **kwargs):
"""
Add an a axes with axes rect [left, bottom, width, height] where all
quantities are in fractions of figure width and height. kwargs are
legal Axes kwargs plus "projection" which sets the projection type
of the axes. (For backward compatibility, polar=True may also be
provided, which is equivalent to projection='polar').
Valid values for "projection" are: %s. Some of these projections
support additional kwargs, which may be provided to add_axes.
rect = l,b,w,h
add_axes(rect)
add_axes(rect, frameon=False, axisbg='g')
add_axes(rect, polar=True)
add_axes(rect, projection='polar')
add_axes(ax) # add an Axes instance
If the figure already has an axes with key *args, *kwargs then it will
simply make that axes current and return it. If you do not want this
behavior, eg you want to force the creation of a new axes, you must
use a unique set of args and kwargs. The artist "label" attribute has
been exposed for this purpose. Eg, if you want two axes that are
otherwise identical to be added to the figure, make sure you give them
unique labels:
add_axes(rect, label='axes1')
add_axes(rect, label='axes2')
The Axes instance will be returned
The following kwargs are supported:
%s
""" % (", ".join(get_projection_names()), '%(Axes)s')
key = self._make_key(*args, **kwargs)
if self._seen.has_key(key):
ax = self._seen[key]
self.sca(ax)
return ax
if not len(args): return
if isinstance(args[0], Axes):
a = args[0]
assert(a.get_figure() is self)
else:
rect = args[0]
ispolar = kwargs.pop('polar', False)
projection = kwargs.pop('projection', None)
if ispolar:
if projection is not None and projection != 'polar':
raise ValueError(
"polar=True, yet projection='%s'. " +
"Only one of these arguments should be supplied." %
projection)
projection = 'polar'
a = projection_factory(projection, self, rect, **kwargs)
self.axes.append(a)
self._axstack.push(a)
self.sca(a)
self._seen[key] = a
return a