def setUp(self):
"""Set up the module."""
self.iscsi_module = ISCSIModule()
self.iscsi_interface = ISCSIInterface(self.iscsi_module)
self._portal = Portal()
self._portal.ip_address = "10.43.136.67"
self._portal.port = "3260"
self._credentials = Credentials()
self._credentials.username = "******"
self._credentials.password = "******"
self._credentials.reverse_username = "******"
self._credentials.reverse_password = "******"
self._node = Node()
self._node.name = "iqn.2014-08.com.example:t1"
self._node.address = "10.43.136.67"
self._node.port = "3260"
self._node.iface = "iface0"
self._node.net_ifacename = "ens3"
# Connect to the properties changed signal.
self.callback = PropertiesChangedCallback()
self.iscsi_interface.PropertiesChanged.connect(self.callback)
def __init__(self):
super().__init__()
# Initialize Blivet.
enable_installer_mode()
# The storage model.
self._current_storage = None
self._storage_playground = None
self.storage_changed = Signal()
# The created partitioning modules.
self._created_partitioning = []
self.created_partitioning_changed = Signal()
# The applied partitioning module.
self._applied_partitioning = None
self.applied_partitioning_changed = Signal()
self.partitioning_reset = Signal()
# Initialize modules.
self._modules = []
self._storage_checker_module = StorageCheckerModule()
self._add_module(self._storage_checker_module)
self._device_tree_module = DeviceTreeModule()
self._add_module(self._device_tree_module)
self._disk_init_module = DiskInitializationModule()
self._add_module(self._disk_init_module)
self._disk_selection_module = DiskSelectionModule()
self._add_module(self._disk_selection_module)
self._snapshot_module = SnapshotModule()
self._add_module(self._snapshot_module)
self._bootloader_module = BootloaderModule()
self._add_module(self._bootloader_module)
self._fcoe_module = FCOEModule()
self._add_module(self._fcoe_module)
self._iscsi_module = ISCSIModule()
self._add_module(self._iscsi_module)
self._nvdimm_module = NVDIMMModule()
self._add_module(self._nvdimm_module)
self._dasd_module = DASDModule()
self._add_module(self._dasd_module)
self._zfcp_module = ZFCPModule()
self._add_module(self._zfcp_module)
# Connect modules to signals.
self.storage_changed.connect(
self._device_tree_module.on_storage_changed)
self.storage_changed.connect(self._disk_init_module.on_storage_changed)
self.storage_changed.connect(
self._disk_selection_module.on_storage_changed)
self.storage_changed.connect(self._snapshot_module.on_storage_changed)
self.storage_changed.connect(
self._bootloader_module.on_storage_changed)
self.storage_changed.connect(self._dasd_module.on_storage_changed)
self._disk_init_module.format_unrecognized_enabled_changed.connect(
self._dasd_module.on_format_unrecognized_enabled_changed)
self._disk_init_module.format_ldl_enabled_changed.connect(
self._dasd_module.on_format_ldl_enabled_changed)
self._disk_selection_module.protected_devices_changed.connect(
self.on_protected_devices_changed)
def __init__(self):
super().__init__()
# Initialize Blivet.
enable_installer_mode()
# The storage model.
self._storage = None
self.storage_changed = Signal()
# Initialize modules.
self._modules = []
self._storage_checker_module = StorageCheckerModule()
self._add_module(self._storage_checker_module)
self._device_tree_module = DeviceTreeModule()
self._add_module(self._device_tree_module)
self._disk_init_module = DiskInitializationModule()
self._add_module(self._disk_init_module)
self._disk_selection_module = DiskSelectionModule()
self._add_module(self._disk_selection_module)
self._snapshot_module = SnapshotModule()
self._add_module(self._snapshot_module)
self._bootloader_module = BootloaderModule()
self._add_module(self._bootloader_module)
self._fcoe_module = FCOEModule()
self._add_module(self._fcoe_module)
self._iscsi_module = ISCSIModule()
self._add_module(self._iscsi_module)
self._nvdimm_module = NVDIMMModule()
self._add_module(self._nvdimm_module)
self._dasd_module = None
self._zfcp_module = None
if arch.is_s390():
self._dasd_module = DASDModule()
self._add_module(self._dasd_module)
self._zfcp_module = ZFCPModule()
self._add_module(self._zfcp_module)
# Initialize the partitioning modules.
self._partitioning_modules = {}
self._auto_part_module = AutoPartitioningModule()
self._add_partitioning_module(AUTO_PARTITIONING.object_path,
self._auto_part_module)
self._manual_part_module = ManualPartitioningModule()
self._add_partitioning_module(MANUAL_PARTITIONING.object_path,
self._manual_part_module)
self._custom_part_module = CustomPartitioningModule()
self._add_partitioning_module(CUSTOM_PARTITIONING.object_path,
self._custom_part_module)
self._interactive_part_module = InteractivePartitioningModule()
self._add_partitioning_module(INTERACTIVE_PARTITIONING.object_path,
self._interactive_part_module)
self._blivet_part_module = BlivetPartitioningModule()
self._add_partitioning_module(BLIVET_PARTITIONING.object_path,
self._blivet_part_module)
# Connect modules to signals.
self.storage_changed.connect(self._device_tree_module.on_storage_reset)
self.storage_changed.connect(self._disk_init_module.on_storage_reset)
self.storage_changed.connect(
self._disk_selection_module.on_storage_reset)
self.storage_changed.connect(self._snapshot_module.on_storage_reset)
self.storage_changed.connect(self._bootloader_module.on_storage_reset)
self._disk_selection_module.protected_devices_changed.connect(
self.on_protected_devices_changed)
def __init__(self):
super().__init__()
# Initialize Blivet.
enable_installer_mode()
# The storage model.
self._storage = None
self.storage_changed = Signal()
self.storage_reset = Signal()
# The created partitioning modules.
self._created_partitioning = []
self.created_partitioning_changed = Signal()
# The applied partitioning module.
self._applied_partitioning = None
self.applied_partitioning_changed = Signal()
# Initialize modules.
self._modules = []
self._storage_checker_module = StorageCheckerModule()
self._add_module(self._storage_checker_module)
self._device_tree_module = DeviceTreeModule()
self._add_module(self._device_tree_module)
self._disk_init_module = DiskInitializationModule()
self._add_module(self._disk_init_module)
self._disk_selection_module = DiskSelectionModule()
self._add_module(self._disk_selection_module)
self._snapshot_module = SnapshotModule()
self._add_module(self._snapshot_module)
self._bootloader_module = BootloaderModule()
self._add_module(self._bootloader_module)
self._fcoe_module = FCOEModule()
self._add_module(self._fcoe_module)
self._iscsi_module = ISCSIModule()
self._add_module(self._iscsi_module)
self._nvdimm_module = NVDIMMModule()
self._add_module(self._nvdimm_module)
self._dasd_module = None
self._zfcp_module = None
if arch.is_s390():
self._dasd_module = DASDModule()
self._add_module(self._dasd_module)
self._zfcp_module = ZFCPModule()
self._add_module(self._zfcp_module)
# Initialize the partitioning modules.
# TODO: Remove the static partitioning modules.
self._add_module(self.create_partitioning(
PartitioningMethod.AUTOMATIC))
self._add_module(self.create_partitioning(PartitioningMethod.MANUAL))
self._add_module(self.create_partitioning(PartitioningMethod.CUSTOM))
self._add_module(
self.create_partitioning(PartitioningMethod.INTERACTIVE))
self._add_module(self.create_partitioning(PartitioningMethod.BLIVET))
# Forget the static partitioning modules.
# TODO: Remove with the static partitioning modules.
self._created_partitioning = []
# Connect modules to signals.
self.storage_changed.connect(self._device_tree_module.on_storage_reset)
self.storage_changed.connect(self._disk_init_module.on_storage_reset)
self.storage_changed.connect(
self._disk_selection_module.on_storage_reset)
self.storage_changed.connect(self._snapshot_module.on_storage_reset)
self.storage_changed.connect(self._bootloader_module.on_storage_reset)
self._disk_selection_module.protected_devices_changed.connect(
self.on_protected_devices_changed)
