def sequential_residues(sel1, offset=1):
"""
PURPOSE: renumbers the selected residues sequentially, regardless of gaps
USAGE: sequential_residues protName # first residue is 1
USAGE: sequential_residues protName, 5 # first residue is 5
EXAMPLE: sequential_residues *
"""
offset = int(offset)
# A counter from offset up
stored.offset = int(offset) - 1
stored.curr_res = None
cmd.alter(
sel1,
"""
if stored.curr_res != int(resi):
stored.offset=stored.offset + 1
stored.curr_res=int(resi)
resi=stored.offset
else:
resi=stored.offset
""",
)
cmd.sort()
def flipAtomName(targetResidueSelection):
"""
switch the atom names of specific residues
"""
# Create flipped residue
cmd.create("flippedRes", targetResidueSelection + " and not alt B")
targetResidueCa = cmd.get_model("flippedRes and name CA")
for g in targetResidueCa.atom:
# print g.resn
if g.resn == 'ARG':
switchName("flippedRes", "NH1", "NH2")
elif g.resn == 'HIS':
switchName("flippedRes", "ND1", "CD2")
switchName("flippedRes", "CE1", "NE2")
elif g.resn == 'ASP':
switchName("flippedRes", "OD1", "OD2")
elif g.resn == 'PHE':
switchName("flippedRes", "CD1", "CD2")
switchName("flippedRes", "CE1", "CE2")
elif g.resn == 'GLN':
switchName("flippedRes", "OE1", "NE2")
elif g.resn == 'GLU':
switchName("flippedRes", "OE1", "OE2")
elif g.resn == 'LEU':
switchName("flippedRes", "CD1", "CD2")
elif g.resn == 'ASN':
switchName("flippedRes", "OD1", "ND2")
elif g.resn == 'TYR':
switchName("flippedRes", "CD1", "CD2")
switchName("flippedRes", "CE1", "CE2")
elif g.resn == 'VAL':
switchName("flippedRes", "CG1", "CG2")
cmd.sort()
# cmd.label("flippedRes","name")
return "flippedRes"
def corexHDXRateUpdateB(obj, infoFile, exchangeRateFile):
"""Sets the B-factor column to the HDX rate.
infoFile is used to establish the mapping between pdb and corex numbers
(*.info).
exchangeRateFile gives the HDX rates (*.Exchange_Rates).
"""
hdx = CorexExchangeRates(exchangeRateFile)
info = CorexAtomInfo(infoFile)
if info is None:
print "Error parsing %s" % infoFile
return
if hdx is None:
print "Error parsing %s" % exchangeRateFile
return
assignPDBNums(
[atom.res for atom in info.getAtoms() if not atom.isHet],
hdx.getResidues()
)
cmd.alter(obj, "b = -10")
for res in hdx.getResidues():
if res.pdbNum is not None and res.exchangeRate is not None:
sel = "%s and i. %s and chain %s" % (
obj, res.pdbNum, res.chain)
cmd.alter( sel, "b = %f" % res.exchangeRate)
cmd.sort(obj)
def corexProtectionFactorUpdateB(obj, infoFile, pfFile):
"""Sets the B-factor column to the protection factors.
infoFile is used to establish the mapping between pdb and corex numbers
(*.info).
pfFile gives the protection factors (*.Protection_Factors).
"""
pf = CorexProtectionFactors(pfFile)
info = CorexAtomInfo(infoFile)
if info is None:
print "Error parsing %s" % infoFile
return
if pf is None:
print "Error parsing %s" % exchangeRateFile
return
assignPDBNums(
[atom.res for atom in info.getAtoms() if not atom.isHet],
pf.getResidues()
)
cmd.alter(obj, "b = -10")
for res in pf.getResidues():
if res.pdbNum is not None and res.modifiedProtectionFactor is not None:
sel = "%s and i. %s and chain %s" % (
obj, res.pdbNum, res.chain)
cmd.alter( sel, "b = %f" % res.modifiedProtectionFactor)
cmd.sort(obj)
def number_chains(selection='all', numbers='ABCDEFGHIJKLMNOPQRSTUVWXYZ'):
"""
DESCRIPTION
Find chains and number them consecutively
USAGE
number_chains [selection [, numbers]]
ARGUMENTS
selection = the selection in which this function operates
numbers = list of symbols to be applied. Defaults to capital letters of the ABC
"""
cmd.alter(selection, 'chain=""')
chains = iter(numbers)
foundchains = []
logger.debug('Finding chains among {} atoms'.format(
cmd.count_atoms(selection)))
for idx in iterate_indices(selection):
if get_chain(idx, selection):
# if this atom already has a chain ID set, continue with the next atom.
continue
foundchains.append(next(chains))
cmd.alter('(bymol idx {}) and ({})'.format(idx, selection),
'chain="{}"'.format(foundchains[-1]))
cmd.sort(selection)
logger.debug('Found chains: ' + ', '.join([str(c) for c in foundchains]))
return foundchains
def label_chains(selection):
"""
DESCRIPTION
Detect and label chains
USAGE
label_chains selection
ARGUMENTS
selection = name of the selection on which to operate. Atoms outside the selection
won't be changed
"""
chainlabels = 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
cmd.alter(selection, 'chain=""')
for label in chainlabels:
space = {'stored': []}
cmd.iterate('({}) and (chain "")'.format(selection),
'stored.append(index)',
space=space)
unnamedindices = space['stored']
if not unnamedindices:
break
cmd.alter(
'({}) and (bymol (({}) and index {}))'.format(
selection, selection, unnamedindices[0]),
'chain="{}"'.format(label))
cmd.sort()
def renumber_residues(sel="polymer", start=1):
"""Renumber residues. Selection should be a single chain.
Run from Pymol.
See also this module for renumbering based on
connectivity: https://pymolwiki.org/index.php/Renumber
"""
class gen_resi_cl:
def __init__(self, start):
self.prev_new_resi = start
self.prev_old_resi = None
def __call__(self, cur_old_resi):
if self.prev_old_resi is None:
ret = self.prev_new_resi
else:
if self.prev_old_resi != cur_old_resi:
ret = self.prev_new_resi + 1
else:
ret = self.prev_new_resi
self.prev_old_resi = cur_old_resi
self.prev_new_resi = ret
print(ret, cur_old_resi)
return ret
space = dict(gen_resi=gen_resi_cl(start=start))
cmd.alter(sel, "resi=gen_resi(resi)", space=space)
cmd.rebuild()
cmd.sort()
def remap_residues(index_file, sel="polymer"):
import pandas as pd
from string import ascii_uppercase as ins
df = pd.read_csv(index_file, dialect="excel-tab")
gr_df = df.groupby("id_from")
for chain, group in gr_df:
ind = {}
prev_to_ind = None
i_ins = 0
for i_x, x in enumerate(group[["from_ind",
"to_ind"]].itertuples(index=False)):
item = tuple(str(_) for _ in tuple(x))
from_ind, to_ind = item
## runs of identical to_ind cause insertion codes
if i_x > 0:
if to_ind == prev_to_ind:
to_ind = to_ind + ins[i_ins]
i_ins += 1
else:
i_ins = 0
if from_ind not in ind:
ind[from_ind] = to_ind
prev_to_ind = item[1]
space = dict(ind_map=ind)
cmd.alter("{} and chain {}".format(sel, chain),
"resi=ind_map[resi]",
space=space)
cmd.rebuild()
cmd.sort()
def corexDiffSAUpdateB(obj, corex1, corex2):
"""Sets the B-factor column to the difference in surface areas between
files corex1-corex2
"""
corex1 = CorexAtomInfo(corex1)
if corex1 is None:
print "Error parsing %s" % corex1
return
corex2 = CorexAtomInfo(corex2)
if corex2 is None:
print "Error parsing %s" % corex2
return
atoms1 = corex1.getAtoms()
atoms2 = corex2.getAtoms()
if len(atoms1) != len(atoms2):
print "Error: Corex files must have identical atoms"
#TODO line up atoms1 and atoms2 somehow
for i in xrange(len(atoms1)):
sel = "%s and n. %s and i. %s and chain %s" % (
obj, atoms1[i].name, atoms1[i].res.pdbNum, atoms1[i].res.chain)
cmd.alter( sel, "b = %f" % (atoms1[i].sa-atoms2[i].sa))
print "b = %f" % (atoms1[i].sa-atoms2[i].sa)
cmd.sort(obj)
def test_sort(self):
cmd.pseudoatom('m1', name='PS2')
cmd.pseudoatom('m1', name='PS1')
v = [a.name for a in cmd.get_model().atom]
self.assertEqual(['PS2', 'PS1'], v)
cmd.sort()
v = [a.name for a in cmd.get_model().atom]
self.assertEqual(['PS1', 'PS2'], v)
def builderMembrane(lipid, runNumber):
"""
build membrane bilayer from single lipid PDB file
"""
refresh()
cmd.load(lipid + ".pdb", "start_lipid")
cmd.alter("start_lipid", "chain = 'X'")
cmd.alter("start_lipid", "segi = 'mema'")
# cmd.rotate('x', 90, "start_lipid")
dmax = findMaxDist("start_lipid")
# create lipid copies and translate them to new position
nlip = 20 # number of lipids forming edge of bilayer
s0 = range(1, nlip, 1)
s1 = range(1, nlip + 1, 1) # excludes first lipid
step_x = 0 # translation in x (TODO: automatic determination of spacing without clashes)
step_y = 7
step_z = 0
step_x2 = 7
step_y2 = 0
step_z2 = 0
for i in s1:
# first column
cmd.copy("lip{}".format(i), "start_lipid") # row of lipids
cmd.alter("lip{}".format(i), "resi={}".format(i)) # change residue numbers
y = i * step_y
cmd.translate("[{},{},{}]".format(step_x, y, step_z), "lip{}".format(i))
# generate remaining rows/columns in same leaflet
for j in s0:
k = int(nlip) * i + j # TODO: general counter to write correct lipid number
cmd.copy("lip{}".format(k), "lip{}".format(i)) # adjacent row of lipids
cmd.alter("lip{}".format(k), "resi={}".format(k)) # change residue numbers
x2 = j * step_x2
cmd.translate("[{},{},{}]".format(x2, step_y2, step_z2), "lip{}".format(k))
cmd.sort() # sort atom order
# create second leaflet
# simple method by creating a single leaflet object:
cmd.create("mema", "(lip*)")
cmd.delete("lip*")
cmd.copy("memb", "mema")
cmd.alter("memb", "segi = 'memb'")
cmd.rotate("x", 180, "memb")
cmd.translate("[0,0,{}]".format((-1.0 * (dmax + 0.5))), "memb")
# cmd.color("yellow", "segi = 'mema'")
# cmd.color("blue", "segi = 'memb'")
cmd.translate("[3.5,3.5,0]", "memb") # optional shift of single leaflet to avoid aliphatic clashes
s = "{}_bilayer".format(lipid)
cmd.create(s, "(mema,memb)")
cmd.delete("mema ,memb, start_lipid")
center(s)
cmd.save(s + ".pdb", s)
cmd.reset()
return s
def mutate(selection, aa):
aa = fix_aa(aa)
cmd.set("retain_order", 0)
cmd.wizard("mutagenesis")
cmd.refresh_wizard()
for single_res in iter_residues(selection):
mutate_one(single_res, aa)
cmd.set_wizard()
cmd.sort()
def test_sort(self):
cmd.pseudoatom('m1', name='PS2')
cmd.pseudoatom('m1', name='PS1')
cmd.alter('all', 'name = name_list.pop()', space={'name_list': ['PS1', 'PS2']})
v = [a.name for a in cmd.get_model().atom]
self.assertEqual(['PS2', 'PS1'], v)
cmd.sort()
v = [a.name for a in cmd.get_model().atom]
self.assertEqual(['PS1', 'PS2'], v)
def testDir(self):
seq = 'ACD'
resv = 5
cmd.fab(seq, 'm1', resi=resv, dir=-1)
# incentive needs sort, opensource is already sorted
cmd.sort()
cmd.iterate('first m1', 'stored.v = (resv, resn)')
self.assertEqual(stored.v, (resv - 2, 'ASP'))
def testDir(self):
seq = 'ACD'
resv = 5
cmd.fab(seq, 'm1', resi=resv, dir=-1)
# incentive needs sort, opensource is already sorted
cmd.sort()
cmd.iterate('first m1', 'stored.v = (resv, resn)')
self.assertEqual(stored.v, (resv - 2, 'ASP'))
def test_sort(self):
cmd.pseudoatom('m1', name='PS2')
cmd.pseudoatom('m1', name='PS1')
cmd.alter('all',
'name = name_list.pop()',
space={'name_list': ['PS1', 'PS2']})
v = [a.name for a in cmd.get_model().atom]
self.assertEqual(['PS2', 'PS1'], v)
cmd.sort()
v = [a.name for a in cmd.get_model().atom]
self.assertEqual(['PS1', 'PS2'], v)
def builder(residues, bonds, mol_name):
"""Using the list generated by read_input connects monosacharides in
a single oligosaccharide"""
cmd.set('suspend_updates', 'on')
cmd.feedback('disable', 'executive', 'actions')
every_object = cmd.get_object_list('all')
if mol_name in every_object:
cmd.delete(mol_name)
every_object.remove(mol_name)
if every_object:
sel = 'not (' + ' or '.join(every_object) + ') and'
else:
sel = ''
for i in range(0, len(residues)):
res_name = residues[i]
cmd.load(os.path.join(path, 'db_glycans', '%s.pdb' % res_name))
cmd.set_name(res_name,
i) #rename object (necessary to avoid repeating names)
cmd.alter(i, 'resi = %s' % i) #name residues for further referencing
cmd.sort(i)
for i in range(0, len(bonds)):
resi_i, resi_j, atom_i, atom_j = bonds[i][0], bonds[i][2], bonds[i][
4], bonds[i][5]
if atom_i > atom_j:
cmd.remove('%s (resi %s and name O%s+H%so)' %
(sel, resi_j, atom_j, atom_j))
cmd.remove('%s (resi %s and name H%so)' % (sel, resi_i, atom_i))
cmd.fuse('%s (resi %s and name O%s)' % (sel, resi_i, atom_i),
'%s (resi %s and name C%s)' % (sel, resi_j, atom_j),
mode=2)
else:
cmd.remove('%s (resi %s and name O%s+H%so)' %
(sel, resi_i, atom_i, atom_i))
cmd.remove('%s (resi %s and name H%so)' % (sel, resi_j, atom_j))
cmd.fuse('%s (resi %s and name C%s)' % (sel, resi_i, atom_i),
'%s (resi %s and name O%s)' % (sel, resi_j, atom_j),
mode=2)
cmd.delete('%s' % i)
cmd.copy(mol_name, '%s' % resi_j)
cmd.delete('%s' % resi_j)
for i in range(0, len(bonds)):
set_phi(mol_name, bonds[i], -60)
set_psi(mol_name, bonds[i], 120)
cmd.delete('pk1')
cmd.delete('pk2')
cmd.delete('pkbond')
cmd.delete('pkmol')
if babel:
fast_min(mol_name, 5000)
minimize(mol_name)
else:
fast_min(mol_name, 5000)
cmd.feedback('enable', 'executive', 'actions')
cmd.set('suspend_updates', 'off')
def corexSAUpdateB(obj, corexFile):
"""Sets the B-factor column to the surface area specified in corexFile"""
corex = CorexAtomInfo(corexFile)
if corex is None:
print "Error parsing %s" % corexFile
return
cmd.alter(obj, "b = -10")
for atom in corex.getAtoms():
sel = "%s and n. %s and i. %s and chain %s" % (
obj, atom.name, atom.res.pdbNum, atom.res.chain)
cmd.alter( sel, "b = %f" % atom.sa)
cmd.sort(obj)
def mse2met(selection='all', quiet=1):
'''
DESCRIPTION
Mutate selenomethionine to methionine
'''
quiet = int(quiet)
x = cmd.alter('(%s) and MSE/SE' % selection, 'name="SD";elem="S"')
cmd.flag('ignore', '(%s) and MSE/' % (selection), 'clear')
cmd.alter('(%s) and MSE/' % selection, 'resn="MET";type="ATOM"')
if not quiet:
print('Altered %d MSE residues to MET' % (x))
cmd.sort()
def mse2met(selection="all", quiet=1):
"""
DESCRIPTION
Mutate selenomethionine to methionine
"""
quiet = int(quiet)
x = cmd.alter("(%s) and MSE/SE" % selection, 'name="SD";elem="S"')
cmd.flag("ignore", "(%s) and MSE/" % (selection), "clear")
cmd.alter("(%s) and MSE/" % selection, 'resn="MET";type="ATOM"')
if not quiet:
print "Altered %d MSE residues to MET" % (x)
cmd.sort()
def mse2met(selection='all', quiet=1):
'''
DESCRIPTION
Mutate selenomethionine to methionine
'''
quiet = int(quiet)
x = cmd.alter('(%s) and MSE/SE' % selection, 'name="SD";elem="S"')
cmd.flag('ignore', '(%s) and MSE/' % (selection), 'clear')
cmd.alter('(%s) and MSE/' % selection, 'resn="MET";type="ATOM"')
if not quiet:
print('Altered %d MSE residues to MET' % (x))
cmd.sort()
def polyala(selection="all", quiet=1):
"""
DESCRIPTION
Mutate any residue to Alanine (except Glycines)
SEE ALSO
stub2ala
"""
quiet = int(quiet)
cmd.remove("polymer and (%s) and not name C+N+O+CA+CB+OXT" % (selection))
cmd.alter("polymer and (%s) and not resn GLY" % (selection), 'resn = "ALA"')
cmd.sort()
def polyala(selection='all', quiet=1):
'''
DESCRIPTION
Mutate any residue to Alanine (except Glycines)
SEE ALSO
stub2ala
'''
quiet = int(quiet)
cmd.remove('polymer and (%s) and not name C+N+O+CA+CB+OXT' % (selection))
cmd.alter('polymer and (%s) and not resn GLY' % (selection), 'resn = "ALA"')
cmd.sort()
def displacementUpdateBAll(objA, alnAri, objB, alnBri):
print(
"This will take a while to go through the for loops. Give me around 3-5 minutes..."
)
# If residue is unassigned in one of the pdb files, we reset its value
for x in range(len(alnAri)):
s1 = objA + " and resi " + alnAri[x][0] + " and name " + str(
alnAri[x][1])
cmd.alter(s1, "b = " + str(-0.01))
for x in range(len(alnBri)):
s2 = objB + " and resi " + alnBri[x][0] + " and name " + alnBri[x][1]
cmd.alter(s2, "b = " + str(-0.01))
cmd.sort(objA)
cmd.sort(objB)
for x in range(len(alnAri)):
s1 = objA + " and resi " + alnAri[x][0] + " and name " + alnAri[x][1]
s2 = objB + " and resi " + alnAri[x][0] + " and name " + alnAri[x][1]
# Names starting with __ (underscores) are normally hidden by PyMOL
tempObject = "__tempObject"
Displacement = cmd.distance(tempObject, s1, s2)
cmd.alter(s1, "b = " + str(Displacement))
cmd.alter(s2, "b = " + str(Displacement))
cmd.delete(tempObject)
cmd.sort(objA)
cmd.sort(objB)
def polyala(selection='all', quiet=1):
'''
DESCRIPTION
Mutate any residue to Alanine (except Glycines)
SEE ALSO
stub2ala
'''
quiet = int(quiet)
cmd.remove('polymer and (%s) and not name C+N+O+CA+CB+OXT' % (selection))
cmd.alter('polymer and (%s) and not resn GLY' % (selection), 'resn = "ALA"')
cmd.sort()
def cap(object):
from pymol import cmd
model = cmd.get_model(object)
# guarantee identical ordering
cmd.delete(object)
cmd.load_model(model,object)
n_list = cmd.identify("(n;n &!(n;c a;2.0))")
c_list = cmd.identify("(n;c &!(n;n a;2.0))")
print n_list
print c_list
for a in n_list:
newat = copy.deepcopy(model.atom[a])
newat.coord = [
newat.coord[0] + random.random(),
newat.coord[1] + random.random(),
newat.coord[2] + random.random(),
]
newat.symbol = 'H'
newat.name = 'HN'
newat.numeric_type = 43
bond = Bond()
bond.order = 1
bond.stereo = 0
bond.index = [ a, model.nAtom ]
print "adding",newat.name,bond.index
model.add_atom(newat)
model.add_bond(bond)
for a in c_list:
newat = copy.deepcopy(model.atom[a])
newat.coord = [
newat.coord[0] + random.random(),
newat.coord[1] + random.random(),
newat.coord[2] + random.random(),
]
newat.symbol = 'H'
newat.name = 'HC'
newat.numeric_type = 41
bond = Bond()
bond.order = 1
bond.stereo = 0
bond.index = [ a, model.nAtom ]
print "adding",newat.name,bond.index
model.add_atom(newat)
model.add_bond(bond)
# reload
cmd.delete(object)
cmd.load_model(model,object)
cmd.sort(object)
def pose_from_pdb(pdb_file_name):
"""Gets information from the pdb like the number of residues, the sequence,
the number of states and the name of the object"""
pose = pdb_file_name
remStr = "all and not (alt ''+A)"
cmd.remove(remStr)
cmd.alter('all', "alt=''")
stored.residues = []
stored.ResiduesNumber = []
cmd.iterate('(name ca)','stored.residues.append((resn))')
cmd.iterate('all','stored.ResiduesNumber.append((resi))')
first = int(stored.ResiduesNumber[0])
cmd.alter(pose, 'resi=str(int(resi)-%s)' % (first))
cmd.sort(pose)
states = cmd.count_states('all') + 1
return pose, stored.residues, len(stored.residues), states
def builder(residues, bonds, mol_name):
"""Using the list generated by read_input connects monosacharides in
a single oligosaccharide"""
cmd.set('suspend_updates', 'on')
cmd.feedback('disable', 'executive', 'actions')
every_object = cmd.get_object_list('all')
if mol_name in every_object:
cmd.delete(mol_name)
every_object.remove(mol_name)
if every_object:
sel = 'not (' + ' or '.join(every_object) + ') and'
else:
sel = ''
for i in range(0, len(residues)):
res_name = residues[i]
cmd.load(os.path.join(path, 'db_glycans', '%s.pdb' % res_name))
cmd.set_name(res_name, i) #rename object (necessary to avoid repeating names)
cmd.alter(i, 'resi = %s' % i) #name residues for further referencing
cmd.sort(i)
for i in range(0, len(bonds)):
resi_i, resi_j, atom_i, atom_j = bonds[i][0], bonds[i][2], bonds[i][4], bonds[i][5]
if atom_i > atom_j:
cmd.remove('%s (resi %s and name O%s+H%so)' % (sel, resi_j, atom_j, atom_j))
cmd.remove('%s (resi %s and name H%so)' % (sel, resi_i, atom_i))
cmd.fuse('%s (resi %s and name O%s)' % (sel, resi_i, atom_i), '%s (resi %s and name C%s)' % (sel, resi_j, atom_j), mode=2)
else:
cmd.remove('%s (resi %s and name O%s+H%so)' % (sel, resi_i, atom_i, atom_i))
cmd.remove('%s (resi %s and name H%so)' % (sel, resi_j, atom_j))
cmd.fuse('%s (resi %s and name C%s)' % (sel, resi_i, atom_i), '%s (resi %s and name O%s)' % (sel, resi_j, atom_j), mode=2)
cmd.delete('%s' % i)
cmd.copy(mol_name, '%s' % resi_j)
cmd.delete('%s' % resi_j)
for i in range(0, len(bonds)):
set_phi(mol_name, bonds[i], -60)
set_psi(mol_name, bonds[i], 120)
cmd.delete('pk1')
cmd.delete('pk2')
cmd.delete('pkbond')
cmd.delete('pkmol')
if babel:
fast_min(mol_name, 5000)
minimize(mol_name)
else:
fast_min(mol_name, 5000)
cmd.feedback('enable', 'executive', 'actions')
cmd.set('suspend_updates', 'off')
def stub2ala(selection='all', quiet=1):
'''
DESCRIPTION
Mutate stub residues to ALA
SEE ALSO
polyala
'''
quiet = int(quiet)
namesets = dict()
lookslike = {
# keys are sorted tuples of backbone atoms
(
'CA', ): 'GLY',
('CA', 'CB'): 'ALA',
('CA', 'CB', 'CG1', 'CG2'): 'VAL',
('CA', 'CB', 'CD1', 'CD2', 'CE1', 'CE2', 'CG', 'CZ'): 'PHE',
}
cmd.iterate(
'(%s) and polymer and (not hydro) and (not name C+N+O+OXT)' %
(selection),
'namesets.setdefault((model,segi,chain,resv,resn,resi), set()).add(name)',
space={
'namesets': namesets,
'set': set
})
for key in sorted(namesets):
resn = key[-2]
name_tuple = tuple(sorted(namesets[key]))
key_str = '/%s/%s/%s/%s`%s' % (key[:3] + key[4:])
if name_tuple == ('CA', 'CB', 'CG'):
key_str_cg = key_str + '/CG'
if not quiet:
print('Removing ' + str(key_str_cg))
cmd.remove(key_str_cg)
name_tuple = ('CA', 'CB')
lookslike_resn = lookslike.get(name_tuple, resn)
if lookslike_resn != resn:
if not quiet:
print('Altering %s to %s' % (key_str, lookslike_resn))
cmd.alter(key_str, 'resn = %s' % (repr(lookslike_resn)))
cmd.sort()
def remove_alt(selection='all', keep='A', quiet=1):
'''
DESCRIPTION
Remove alternative location atoms.
USAGE
remove_alt [selection [, keep]]
ARGUMENTS
selection = string: atom selection
keep = string: AltLoc to keep {default: A}
'''
cmd.remove('(%s) and not alt +%s' % (selection, keep), quiet=int(quiet))
cmd.alter(selection, '(alt,q)=("",1.0)')
cmd.sort()
def remove_alt(selection="all", keep="A", quiet=1):
"""
DESCRIPTION
Remove alternative location atoms.
USAGE
remove_alt [selection [, keep]]
ARGUMENTS
selection = string: atom selection
keep = string: AltLoc to keep {default: A}
"""
cmd.remove("(%s) and not alt +%s" % (selection, keep), quiet=int(quiet))
cmd.alter(selection, '(alt,q)=("",1.0)')
cmd.sort()
def remove_alt(selection='all', keep='A', quiet=1):
'''
DESCRIPTION
Remove alternative location atoms.
USAGE
remove_alt [selection [, keep]]
ARGUMENTS
selection = string: atom selection
keep = string: AltLoc to keep {default: A}
'''
cmd.remove('(%s) and not alt +%s' % (selection, keep), quiet=int(quiet))
cmd.alter(selection, '(alt,q)=("",1.0)')
cmd.sort()
def stub2ala(selection="all", quiet=1):
"""
DESCRIPTION
Mutate stub residues to ALA
SEE ALSO
polyala
"""
quiet = int(quiet)
namesets = dict()
lookslike = {
# keys are sorted tuples of backbone atoms
("CA",): "GLY",
("CA", "CB"): "ALA",
("CA", "CB", "CG1", "CG2"): "VAL",
("CA", "CB", "CD1", "CD2", "CE1", "CE2", "CG", "CZ"): "PHE",
}
cmd.iterate(
"(%s) and polymer and (not hydro) and (not name C+N+O+OXT)" % (selection),
"namesets.setdefault((model,segi,chain,resv,resn,resi), set()).add(name)",
space={"namesets": namesets, "set": set},
)
for key in sorted(namesets):
resn = key[-2]
name_tuple = tuple(sorted(namesets[key]))
key_str = "/%s/%s/%s/%s`%s" % (key[:3] + key[4:])
if name_tuple == ("CA", "CB", "CG"):
key_str_cg = key_str + "/CG"
if not quiet:
print "Removing", key_str_cg
cmd.remove(key_str_cg)
name_tuple = ("CA", "CB")
lookslike_resn = lookslike.get(name_tuple, resn)
if lookslike_resn != resn:
if not quiet:
print "Altering %s to %s" % (key_str, lookslike_resn)
cmd.alter(key_str, "resn = %s" % (repr(lookslike_resn)))
cmd.sort()
def stub2ala(selection='all', quiet=1):
'''
DESCRIPTION
Mutate stub residues to ALA
SEE ALSO
polyala
'''
quiet = int(quiet)
namesets = dict()
lookslike = {
# keys are sorted tuples of backbone atoms
('CA',): 'GLY',
('CA', 'CB'): 'ALA',
('CA', 'CB', 'CG1', 'CG2'): 'VAL',
('CA', 'CB', 'CD1', 'CD2', 'CE1', 'CE2', 'CG', 'CZ'): 'PHE',
}
cmd.iterate('(%s) and polymer and (not hydro) and (not name C+N+O+OXT)' % (selection),
'namesets.setdefault((model,segi,chain,resv,resn,resi), set()).add(name)',
space={'namesets': namesets, 'set': set})
for key in sorted(namesets):
resn = key[-2]
name_tuple = tuple(sorted(namesets[key]))
key_str = '/%s/%s/%s/%s`%s' % (key[:3] + key[4:])
if name_tuple == ('CA', 'CB', 'CG'):
key_str_cg = key_str + '/CG'
if not quiet:
print('Removing', key_str_cg)
cmd.remove(key_str_cg)
name_tuple = ('CA', 'CB')
lookslike_resn = lookslike.get(name_tuple, resn)
if lookslike_resn != resn:
if not quiet:
print('Altering %s to %s' % (key_str, lookslike_resn))
cmd.alter(key_str, 'resn = %s' % (repr(lookslike_resn)))
cmd.sort()
def displacementUpdateBAll(objA, alnAri, objB, alnBri):
print "This will take a while to go through the for loops. Give me around 3-5 minutes..."
### If residue is unassigned in one of the pdb files, we reset its value
for x in range(len(alnAri)):
s1 = objA + " and resi " + alnAri[x][0] + " and name " + str(alnAri[x][1])
cmd.alter( s1, "b = " + str(-0.01))
for x in range(len(alnBri)):
s2 = objB + " and resi " + alnBri[x][0] + " and name " + alnBri[x][1]
cmd.alter( s2, "b = " + str(-0.01))
cmd.sort(objA); cmd.sort(objB)
for x in range(len(alnAri)):
s1 = objA + " and resi " + alnAri[x][0] + " and name " + alnAri[x][1]
s2 = objB + " and resi " + alnAri[x][0] + " and name " + alnAri[x][1]
### Names starting with __ (underscores) are normally hidden by PyMOL
tempObject = "__tempObject"
Displacement = cmd.distance(tempObject, s1, s2)
cmd.alter( s1, "b = " + str(Displacement))
cmd.alter( s2, "b = " + str(Displacement))
cmd.delete(tempObject)
cmd.sort(objA); cmd.sort(objB)
def ColorByDisplacementAll(objSel1, objSel2, super1='all', super2='all', doColor="True", doAlign="True", AlignedWhite='yes'):
# First create backup copies; names starting with __ (underscores) are normally hidden by PyMOL
tObj1, tObj2, aln = "__tempObj1", "__tempObj2", "__aln"
if strTrue(doAlign):
# Create temp objects
cmd.create(tObj1, objSel1)
cmd.create(tObj2, objSel2)
# Align and make create an object aln which indicates which atoms were paired between the two structures
# Super is must faster than align http://www.pymolwiki.org/index.php/Super
cmd.super(tObj1 + ' and ' + str(super1), tObj2 + ' and ' + str(super2), object=aln)
# Modify the original matrix of object1 from the alignment
cmd.matrix_copy(tObj1, objSel1)
else:
# Create temp objects
cmd.create(tObj1, objSel1)
cmd.create(tObj2, objSel2)
# Align and make create an object aln which indicates which atoms were paired between the two structures
# Super is must faster than align http://www.pymolwiki.org/index.php/Super
cmd.super(tObj1 + ' and ' + str(super1), tObj2 + ' and ' + str(super2), object=aln)
# Modify the B-factor columns of the original objects,
# in order to identify the residues NOT used for alignment, later on
cmd.alter(objSel1 + " or " + objSel2, "b=-0.2")
cmd.alter(tObj1 + " or " + tObj2, "chain='A'")
cmd.alter(tObj1 + " or " + tObj2, "segi='A'")
# Update pymol internal representations; one of these should do the trick
cmd.refresh()
cmd.rebuild()
cmd.sort(tObj1)
cmd.sort(tObj2)
# Create lists for storage
stored.alnAres, stored.alnBres = [], []
# Iterate over objects and get resi
if AlignedWhite == 'yes':
cmd.iterate(tObj1 + " and not " + aln, "stored.alnAres.append((resi, name))")
cmd.iterate(tObj2 + " and not " + aln, "stored.alnBres.append((resi, name))")
else:
cmd.iterate(tObj1, "stored.alnAres.append((resi, name))")
cmd.iterate(tObj2, "stored.alnBres.append((resi, name))")
# Change the B-factors for EACH object
displacementUpdateBAll(tObj1, stored.alnAres, tObj2, stored.alnBres)
# Store the NEW B-factors
stored.alnAnb, stored.alnBnb = [], []
# Iterate over objects and get b
if AlignedWhite == 'yes':
# Iterate over objects which is not aligned
cmd.iterate(tObj1 + " and not " + aln, "stored.alnAnb.append(b)")
cmd.iterate(tObj2 + " and not " + aln, "stored.alnBnb.append(b)")
else:
# Or Iterate over all objects with CA
cmd.iterate(tObj1, "stored.alnAnb.append(b)")
cmd.iterate(tObj2, "stored.alnBnb.append(b)")
# Get rid of all intermediate objects and clean up
cmd.delete(tObj1)
cmd.delete(tObj2)
cmd.delete(aln)
# Assign the just stored NEW B-factors to the original objects
print "Sooon ready. 1 more minute"
for x in range(len(stored.alnAres)):
cmd.alter(objSel1 + " and resi " + str(stored.alnAres[x][0]) + " and name " + str(stored.alnAres[x][1]), "b = " + str(stored.alnAnb[x]))
for x in range(len(stored.alnBres)):
cmd.alter(objSel2 + " and resi " + str(stored.alnBres[x][0]) + " and name " + str(stored.alnBres[x][1]), "b = " + str(stored.alnBnb[x]))
cmd.rebuild()
cmd.refresh()
cmd.sort(objSel1)
cmd.sort(objSel2)
# Provide some useful information
stored.allRMSDval = []
stored.allRMSDval = stored.alnAnb + stored.alnBnb
print "\nColorByDisplacementAll completed successfully."
print "The MAXIMUM Displacement is: " + str(max(stored.allRMSDval)) + " residue " + str(stored.alnAres[int(stored.allRMSDval.index(max(stored.allRMSDval)))])
if strTrue(doColor):
# Showcase what we did
# cmd.orient()
# cmd.hide("all")
cmd.show("sticks", objSel1 + " or " + objSel2)
# Select the residues not used for alignment; they still have their B-factors as "-0.2"
cmd.select("notUsedForAln", "b = -0.2")
# White-wash the residues not used for alignment
cmd.color("white", "notUsedForAln")
# Select the residues not in both pdb files; they have their B-factors as "-0.01"
cmd.select("ResNotInBothPDB", "b = -0.01")
# White-wash the residues not used for alignment
cmd.color("black", "ResNotInBothPDB")
# Color the residues used for alignment according to their B-factors (Displacement values)
#cmd.spectrum("b", 'rainbow', "((" + objSel1 + ") or (" + objSel2 +" )) and not notUsedForAln+ResNotInBothPDB")
cmd.spectrum("b", 'rainbow', "((" + objSel1 + ") or (" + objSel2 + " )) and not (notUsedForAln or ResNotInBothPDB)")
# Delete the selection of atoms not used for alignment
# If you would like to keep this selection intact,
# just comment "cmd.delete" line and
# uncomment the "cmd.disable" line abowe.
cmd.disable("notUsedForAln")
cmd.delete("notUsedForAln")
cmd.disable("ResNotInBothPDB")
cmd.delete("ResNotInBothPDB")
print "\nObjects are now colored by C-alpha displacement deviation."
print "Blue is minimum and red is maximum..."
print "White is those residues used in the alignment algorithm. Can be turned off in top of algorithm."
print "Black is residues that does not exist in both files..."
ligand_name = file.split('_')[0]
loaded_ligs.append(ligand_name)
cmd.load('ligs/' + file, ligand_name)
#select the ligand atomes of the original ligand to align with
target_atom1 = 'RA95_target and name C3'
target_atom2 = 'RA95_target and name C4'
target_atom3 = 'RA95_target and name C5'
#select the ligand atomes of the new ligand to align with and align the selected atoms of old and new ligand
for ligand in loaded_ligs:
mobile_atom1 = ligand + ' and name CL1'
mobile_atom2 = ligand + ' and name CL'
mobile_atom3 = ligand + ' and name CL2'
cmd.pair_fit(mobile_atom1, target_atom1, mobile_atom2, target_atom2,
mobile_atom3, target_atom3)
#remove old ligand
cmd.remove('RA95_target and resn PEN')
#build bond between Lys83 and the new ligand and generate pdb file
for ligand in loaded_ligs:
cmd.copy('RA95_' + ligand, 'RA95_target')
cmd.fuse(ligand + ' and name CL',
'RA95_' + ligand + ' and resn LYX and name NZ', '3')
cmd.bond('RA95_' + ligand + ' and resn LYX and name NZ',
'RA95_' + ligand + ' and name CL')
cmd.alter('RA95_' + ligand + ' and resn ' + ligand, 'segi="B"')
cmd.sort('RA95_' + ligand)
cmd.save('RA95_' + ligand + '.pdb', 'RA95_' + ligand, '0')
def builderMembrane(lipid):
"""
build membrane bilayer from single lipid PDB file
"""
###FIXME: add protein to the model and change the modelName if not empty. Otherwise call the model "{protein}_{lipid}"
cmd.load(lipid + ".pdb", "start_lipid")
cmd.alter("start_lipid", "chain = 'X'")
cmd.alter("start_lipid", "segi = 'mema'")
cmd.rotate('x', 90, "start_lipid")
dmax = findMaxDist("start_lipid")
# create lipid copies and translate them to new position
nlip = 20 # number of lipids forming edge of bilayer
s0 = range(1, nlip, 1)
s1 = range(1, nlip + 1, 1) # excludes first lipid
step_x = 0 # translation in x (TODO: automatic determination of spacing without clashes)
step_y = 7
step_z = 0
step_x2 = 7
step_y2 = 0
step_z2 = 0
for i in s1:
# first column
cmd.copy(f"lip{i}", "start_lipid") # row of lipids
cmd.alter(f"lip{i}", f"resi{i}") # change residue numbers
y = i * step_y
cmd.translate(f"[{step_x},{y},{step_z}]", f"lip{i}")
# generate remaining rows/columns in same leaflet
for j in s0:
k = int(
nlip
) * i + j # TODO: general counter to write correct lipid number
cmd.copy(f"lip{k}", f"lip{i}") # adjacent row of lipids
cmd.alter(f"lip{k}", f"resi={k}") # change residue numbers
x2 = j * step_x2
cmd.translate(f"[{x2},{step_y2},{step_z2}]", f"lip{k}")
cmd.sort() # sort atom order
# create second leaflet
# simple method by creating a single leaflet object:
cmd.create("mema", "(lip*)")
cmd.delete("lip*")
cmd.copy("memb", "mema")
cmd.alter("memb", "segi = 'memb'")
cmd.rotate("x", 180, "memb")
cmd.translate(f"[0,0,{(-1.0*(dmax + 0.5))}]", "memb")
#cmd.color("yellow", "segi = 'mema'")
#cmd.color("blue", "segi = 'memb'")
cmd.translate(
"[3.5,3.5,0]",
"memb") # optional shift of single leaflet to avoid aliphatic clashes
s = f"{lipid}_bilayer"
cmd.create(s, "(mema,memb)")
cmd.delete("mema ,memb, start_lipid")
center(s)
cmd.save(s + ".pdb", s)
cmd.reset()
return s
def add_missing_atoms(selection='all', cycles=200, quiet=1):
'''
DESCRIPTION
Mutate those residues to themselves which have missing atoms
SEE ALSO
stub2ala
'''
from collections import defaultdict
from chempy import fragments
cycles, quiet = int(cycles), int(quiet)
reference = {
'ALA': set(['CB']),
'ARG': set(['CB', 'CG', 'NE', 'CZ', 'NH1', 'NH2', 'CD']),
'ASN': set(['CB', 'CG', 'OD1', 'ND2']),
'ASP': set(['CB', 'CG', 'OD1', 'OD2']),
'CYS': set(['CB', 'SG']),
'GLN': set(['CB', 'CG', 'CD', 'NE2', 'OE1']),
'GLU': set(['CB', 'CG', 'OE2', 'CD', 'OE1']),
'GLY': set([]),
'HIS': set(['CE1', 'CB', 'CG', 'CD2', 'ND1', 'NE2']),
'ILE': set(['CB', 'CD1', 'CG1', 'CG2']),
'LEU': set(['CB', 'CG', 'CD1', 'CD2']),
'LYS': set(['CB', 'CG', 'NZ', 'CE', 'CD']),
'MET': set(['CB', 'CG', 'CE', 'SD']),
'PHE': set(['CE1', 'CB', 'CG', 'CZ', 'CD1', 'CD2', 'CE2']),
'PRO': set(['CB', 'CG', 'CD']),
'SER': set(['OG', 'CB']),
'THR': set(['CB', 'OG1', 'CG2']),
'TRP': set(['CZ2', 'CB', 'CG', 'CH2', 'CE3', 'CD1', 'CD2', 'CZ3', 'NE1', 'CE2']),
'TYR': set(['CE1', 'OH', 'CB', 'CG', 'CZ', 'CD1', 'CD2', 'CE2']),
'VAL': set(['CB', 'CG1', 'CG2']),
}
namedsele = cmd.get_unused_name('_')
cmd.select(namedsele, selection, 0)
namelists = defaultdict(list)
cmd.iterate('(%s) and polymer' % namedsele,
'namelists[model,segi,chain,resn,resi,resv].append(name)',
space=locals())
sele_dict = defaultdict(list)
tmp_name = cmd.get_unused_name('_')
for key, namelist in namelists.items():
resn = key[3]
if resn not in reference:
if not quiet:
print(' Unknown residue: + ' + resn)
continue
if not reference[resn].issubset(namelist):
try:
frag = fragments.get(resn.lower())
for a in frag.atom:
a.segi = key[1]
a.chain = key[2]
a.resi = key[4]
a.resi_number = key[5]
cmd.load_model(frag, tmp_name, 1, zoom=0)
skey = '/%s/%s/%s/%s`%s' % key[:5]
cmd.remove(skey + ' and not name N+C+O+OXT+CA')
cmd.align(tmp_name, skey + ' and name N+C+CA', cycles=0)
cmd.remove(tmp_name + ' and (name N+C+O+CA or hydro)')
cmd.fuse('name CB and ' + tmp_name, 'name CA and ' + skey, move=0)
if resn == 'PRO':
cmd.bond(skey + '/N', skey + '/CD')
cmd.unpick()
cmd.delete(tmp_name)
sele_dict[key[0]].append(skey)
if not quiet:
print(' Mutated ' + skey)
except:
print(' Mutating ' + skey + ' failed')
for model in sele_dict:
cmd.sort(model)
sculpt_relax(' '.join(sele_dict[model]), 0, 0, model, cycles)
cmd.delete(namedsele)
def number_residues(selection):
"""
DESCRIPTION
Number residues in a peptid chain
USAGE
number_residues selection
ARGUMENTS
selection = a selection containing the peptide chain
"""
logger.debug('number_residues in selection "{}"'.format(selection))
cmd.alter(selection, 'resv={}'.format(0))
peptide_bonds = list(find_peptide_bonds(selection))
logger.debug('Number of peptide bonds found: {}'.format(
len(peptide_bonds)))
for i, n in enumerate([n for h, n, c, o in peptide_bonds]):
cmd.alter('(idx {}) and ({})'.format(n, selection),
'resv={}'.format(i + 1))
for i, n in enumerate([n for h, n, c, o in peptide_bonds]):
flood_fill_resi(n, get_resv(n, selection),
[c for h, n, c, o in peptide_bonds], selection)
# now set the residue index of the amide bond C=O-s
for h, n, c, o in peptide_bonds:
for idx in iterate_neighbours(c, selection):
if not cmd.count_atoms(
'(idx {}) and ({}) and (idx {} or idx {})'.format(
idx, selection, n, o)):
# this is the alpha carbon of the current residue
cmd.alter(
'(idx {} or idx {}) and ({})'.format(c, o, selection),
'resv={}'.format(get_resv(idx, selection)))
cmd.sort(selection)
# now residue "0" will be the n-terminal residue. Adjust the numbers to be consecutive
residue_order = []
pairs = [(get_resv(c, selection), get_resv(n, selection))
for h, n, c, o in peptide_bonds]
residue_order = list(pairs[0])
while True:
# try to add the next number at the end
try:
nextpair = [p for p in pairs if p[0] == residue_order[-1]][0]
residue_order.append(nextpair[1])
continue
except IndexError:
pass
try:
prevpair = [p for p in pairs if p[1] == residue_order[0]][0]
residue_order.insert(0, prevpair[0])
continue
except IndexError:
pass
break
indices_for_residues = [
list(iterate_indices('({}) and (resi {})'.format(selection, resi)))
for resi in range(len(peptide_bonds) + 1)
]
for newresi, oldresi in enumerate(residue_order):
sel = '({}) and '.format(selection) + '(idx ' + '+'.join(
[str(i) for i in indices_for_residues[oldresi]]) + ')'
logger.debug('SEL: {}'.format(sel))
cmd.alter(sel, 'resv={}'.format(newresi))
cmd.sort(selection)
return list(range(len(peptide_bonds) + 1))
def recognize_peptide(rtpfile, selection='all'):
"""
DESCRIPTION
Analyze a model, assign chain and residue IDs and name atoms according to
a GROMACS forcefield
USAGE
recognize_peptide rtpfile [, selection]
ARGUMENTS
rtpfile = a GROMACS residue database (.rtp file) or a GROMACS forcefield directory
selection = selected group of atoms to operate on. Defaults to 'all'.
NOTES
First the selection is divided into chains according to connectivity. Each
chain is subsequently divided into residues by finding peptide bonds. The
residues are numbered consecutively from 0, starting at the N terminus.
Lastly, every residue of every chain is compared to the entries in the rtp
file and if matching is found, the residue name and atom names are updated.
CAVEATS
The residue matching is done using graph isomorphism (VF2 algorithm, as
implemented by the networkx package), taking only bonds and element symbols
into account. This has the following consequences:
1) There is no distinction between ligands of the same element. E.g. the
naming of the two hydrogens bound to the nitrogen of the amide group at
the end of the sidechain of Gln and Asn is undefined, although they
have slightly different partial charges in the Charmm36m forcefield.
This has to be fixed by the user.
2) If the RTP file contains isomorphous residues, the first one will be
matched. A typical example for this is stereoisomeric amino acids:
e.g. ALA and DALA, GLN and DGLN in the Charmm36m forcefield. This also
needs to be fixed by the user.
"""
chains = number_chains(selection)
rtpdata = list(graphs_from_rtp(rtpfile))
for ch in chains:
print('Looking at chain {}'.format(ch))
residues = number_residues('({}) and (chain {})'.format(selection, ch))
print(' Found residues {} to {}'.format(min(residues), max(residues)))
for r in residues:
# analyze each residue
resn = match_amino_acid(
'({}) and (chain {}) and (resi {})'.format(selection, ch, r),
rtpdata)
if resn is not None:
print(' Residue {}/{}/ {}'.format(ch, r, resn))
else:
print(' Residue {}/{}/ not matched'.format(ch, r))
if resn in ['B3Q', 'DB3Q']:
fix_gln_hydrogens('({}) and (chain {}) and (resi {})'.format(
selection, ch, r))
cmd.sort()
def morpheasy(source, target, source_state=0, target_state=0, name=None,
refinement=5, quiet=1):
'''
DESCRIPTION
Morph source to target, based on sequence alignment
USAGE
morpheasy source, target [, source_state [, target_state [, name ]]]
EXAMPLE
fetch 1akeA 4akeA, async=0
extra_fit
morpheasy 1akeA, 4akeA
'''
try:
from epymol import rigimol
except ImportError:
print 'No epymol available, please use a "Incentive PyMOL" build'
print 'You may use "morpheasy_linear" instead'
return
from .editing import mse2met
from .querying import get_selection_state
# arguments
source_state = int(source_state)
target_state = int(target_state)
refinement = int(refinement)
quiet = int(quiet)
if source_state < 1: source_state = get_selection_state(source)
if target_state < 1: target_state = get_selection_state(target)
# temporary objects
# IMPORTANT: cmd.get_raw_alignment does not work with underscore object names!
alnobj = cmd.get_unused_name('_aln')
so_obj = cmd.get_unused_name('source') # see above
ta_obj = cmd.get_unused_name('target') # see above
so_sel = cmd.get_unused_name('_source_sel')
ta_sel = cmd.get_unused_name('_target_sel')
cmd.create(so_obj, source, source_state, 1)
cmd.create(ta_obj, target, target_state, 1)
mse2met(so_obj)
mse2met(ta_obj)
# align sequence
cmd.align(ta_obj, so_obj, object=alnobj, cycles=0, transform=0,
mobile_state=1, target_state=1)
cmd.refresh()
cmd.select(so_sel, '%s and %s' % (so_obj, alnobj))
cmd.select(ta_sel, '%s and %s' % (ta_obj, alnobj))
alnmap = dict(cmd.get_raw_alignment(alnobj))
alnmap.update(dict((v,k) for (k,v) in alnmap.iteritems()))
# copy source atom identifiers to temporary target
idmap = dict()
cmd.iterate(so_sel, 'idmap[model,index] = (segi,chain,resi,resn,name)',
space={'idmap': idmap})
cmd.alter(ta_sel, '(segi,chain,resi,resn,name) = idmap[alnmap[model,index]]',
space={'idmap': idmap, 'alnmap': alnmap})
# remove unaligned
cmd.remove('%s and not %s' % (so_obj, so_sel))
cmd.remove('%s and not %s' % (ta_obj, ta_sel))
assert cmd.count_atoms(so_obj) == cmd.count_atoms(ta_obj)
cmd.sort(so_obj)
cmd.sort(ta_obj)
# append target to source as 2-state morph-in object
cmd.create(so_obj, ta_obj, 1, 2)
# morph
if name is None:
name = cmd.get_unused_name('morph')
rigimol.morph(so_obj, name, refinement=refinement, async=0)
# clean up
for obj in [alnobj, so_obj, so_sel, ta_obj, ta_sel]:
cmd.delete(obj)
return name
def morpheasy(source,
target,
source_state=0,
target_state=0,
name=None,
refinement=5,
quiet=1):
'''
DESCRIPTION
Morph source to target, based on sequence alignment
USAGE
morpheasy source, target [, source_state [, target_state [, name ]]]
EXAMPLE
fetch 1akeA 4akeA, async=0
extra_fit
morpheasy 1akeA, 4akeA
'''
try:
from epymol import rigimol
except ImportError:
print('No epymol available, please use a "Incentive PyMOL" build')
print('You may use "morpheasy_linear" instead')
return
from .editing import mse2met
from .querying import get_selection_state
# arguments
source_state = int(source_state)
target_state = int(target_state)
refinement = int(refinement)
quiet = int(quiet)
if source_state < 1: source_state = get_selection_state(source)
if target_state < 1: target_state = get_selection_state(target)
# temporary objects
# IMPORTANT: cmd.get_raw_alignment does not work with underscore object names!
alnobj = cmd.get_unused_name('_aln')
so_obj = cmd.get_unused_name('source') # see above
ta_obj = cmd.get_unused_name('target') # see above
so_sel = cmd.get_unused_name('_source_sel')
ta_sel = cmd.get_unused_name('_target_sel')
cmd.create(so_obj, source, source_state, 1)
cmd.create(ta_obj, target, target_state, 1)
mse2met(so_obj)
mse2met(ta_obj)
# align sequence
cmd.align(ta_obj,
so_obj,
object=alnobj,
cycles=0,
transform=0,
mobile_state=1,
target_state=1)
cmd.refresh()
cmd.select(so_sel, '%s and %s' % (so_obj, alnobj))
cmd.select(ta_sel, '%s and %s' % (ta_obj, alnobj))
alnmap = dict(cmd.get_raw_alignment(alnobj))
alnmap.update(dict((v, k) for (k, v) in alnmap.items()))
# copy source atom identifiers to temporary target
idmap = dict()
cmd.iterate(so_sel,
'idmap[model,index] = (segi,chain,resi,resn,name)',
space={'idmap': idmap})
cmd.alter(ta_sel,
'(segi,chain,resi,resn,name) = idmap[alnmap[model,index]]',
space={
'idmap': idmap,
'alnmap': alnmap
})
# remove unaligned
cmd.remove('%s and not %s' % (so_obj, so_sel))
cmd.remove('%s and not %s' % (ta_obj, ta_sel))
assert cmd.count_atoms(so_obj) == cmd.count_atoms(ta_obj)
cmd.sort(so_obj)
cmd.sort(ta_obj)
# append target to source as 2-state morph-in object
cmd.create(so_obj, ta_obj, 1, 2)
# morph
if name is None:
name = cmd.get_unused_name('morph')
rigimol.morph(so_obj, name, refinement=refinement, async=0)
# clean up
for obj in [alnobj, so_obj, so_sel, ta_obj, ta_sel]:
cmd.delete(obj)
return name
def add_missing_atoms(selection='all', cycles=200, quiet=1):
'''
DESCRIPTION
Mutate those residues to themselves which have missing atoms
SEE ALSO
stub2ala
'''
from collections import defaultdict
from chempy import fragments
cycles, quiet = int(cycles), int(quiet)
reference = {
'ALA': set(['CB']),
'ARG': set(['CB', 'CG', 'NE', 'CZ', 'NH1', 'NH2', 'CD']),
'ASN': set(['CB', 'CG', 'OD1', 'ND2']),
'ASP': set(['CB', 'CG', 'OD1', 'OD2']),
'CYS': set(['CB', 'SG']),
'GLN': set(['CB', 'CG', 'CD', 'NE2', 'OE1']),
'GLU': set(['CB', 'CG', 'OE2', 'CD', 'OE1']),
'GLY': set([]),
'HIS': set(['CE1', 'CB', 'CG', 'CD2', 'ND1', 'NE2']),
'ILE': set(['CB', 'CD1', 'CG1', 'CG2']),
'LEU': set(['CB', 'CG', 'CD1', 'CD2']),
'LYS': set(['CB', 'CG', 'NZ', 'CE', 'CD']),
'MET': set(['CB', 'CG', 'CE', 'SD']),
'PHE': set(['CE1', 'CB', 'CG', 'CZ', 'CD1', 'CD2', 'CE2']),
'PRO': set(['CB', 'CG', 'CD']),
'SER': set(['OG', 'CB']),
'THR': set(['CB', 'OG1', 'CG2']),
'TRP': set(['CZ2', 'CB', 'CG', 'CH2', 'CE3', 'CD1', 'CD2', 'CZ3', 'NE1', 'CE2']),
'TYR': set(['CE1', 'OH', 'CB', 'CG', 'CZ', 'CD1', 'CD2', 'CE2']),
'VAL': set(['CB', 'CG1', 'CG2']),
}
namedsele = cmd.get_unused_name('_')
cmd.select(namedsele, selection, 0)
namelists = defaultdict(list)
cmd.iterate('(%s) and polymer' % namedsele,
'namelists[model,segi,chain,resn,resi,resv].append(name)',
space=locals())
sele_dict = defaultdict(list)
tmp_name = cmd.get_unused_name('_')
for key, namelist in namelists.items():
resn = key[3]
if resn not in reference:
if not quiet:
print(' Unknown residue:', resn)
continue
if not reference[resn].issubset(namelist):
try:
frag = fragments.get(resn.lower())
for a in frag.atom:
a.segi = key[1]
a.chain = key[2]
a.resi = key[4]
a.resi_number = key[5]
cmd.load_model(frag, tmp_name, 1, zoom=0)
skey = '/%s/%s/%s/%s`%s' % key[:5]
cmd.remove(skey + ' and not name N+C+O+OXT+CA')
cmd.align(tmp_name, skey + ' and name N+C+CA', cycles=0)
cmd.remove(tmp_name + ' and (name N+C+O+CA or hydro)')
cmd.fuse('name CB and ' + tmp_name, 'name CA and ' + skey, move=0)
if resn == 'PRO':
cmd.bond(skey + '/N', skey + '/CD')
cmd.unpick()
cmd.delete(tmp_name)
sele_dict[key[0]].append(skey)
if not quiet:
print(' Mutated ', skey)
except:
print(' Mutating', skey, 'failed')
for model in sele_dict:
cmd.sort(model)
sculpt_relax(' '.join(sele_dict[model]), 0, 0, model, cycles)
cmd.delete(namedsele)
