def _hpump(self):
""" Pulls message(s) (if any) from the message queue
Must be called periodically - it serves as "event loop"
for the whole process (normally)
A Child process:
- "_sub" : locally subscribe the Main process to msgType
This will send all local messages of msgType
up to the Main process where it can
be further distributed (multicasted)
- "_ready" : just pass along to Message Bus
The Main process:
- "_sub" :
- subscribe locally from Message Bus
- send down to all Children in "split-horizon"
- "_started" : just pass along on Message Bus
"""
#print "mswitch._hpump: (%s) msg: %s" % (self._pname, "begin")
Bus.publish(self, "%beat?")
msg = self._getMsg()
while (msg is not None) and (not self._term):
self._processMsg(msg)
msg=self._getMsgNoWait()
Bus.publish(self, "%beat?")
def _hpumpChild(self, mtype, spname, msg):
#print "** mswitch._hpumpChild: mtype(%s) spname(%s)" % (mtype, spname)
if mtype=="_ready":
#print "mswitch._hpumpChild: sending `_ready` on local Bus"
Bus.publish(self, "_ready")
return
if mtype=="_sub":
try: msgtype=msg.pop(0)
except:
raise RuntimeError("missing `msgType` from `_sub` message")
self._addSub(self.MAIN_PNAME, msgtype)
#print "*** mswitch_hpumpChild: child(%s) subscribing to msgtype(%s)" % (self._pname, msgtype)
return
## All other "system" messages are ignored
if mtype.startswith("_"):
return
## Finally, publish whatever message we receive
## from the Main process: we should have subscribed
## to these anyhow (unless of course there is a bug ;-)
#print "mswitch._hpumpChild: mtype(%s) msg(%s)" % (mtype, msg)
Bus.publish(self, mtype, *tuple(msg))
def _qbeat(self):
if self._beat:
if self._child:
Bus.publish(self, "%beat", self.pname)
else:
Bus.publish(self, "beat", self.pname)
self._beat=False ## atomic assignment
def run(self):
while not self._exitFlag:
try:
Bus.publish(None, "mswitch_pump")
except Exception,e:
print "*** (MAIN) Comm Exception!"
Bus.publish(None, "log", "*** (MAIN) Comm exception: %s" % e)
break
def _hstarted(self, pname):
""" Generates `ready` message when all the
Child processes report as being started
"""
if self.is_child:
return
self._started.extend([pname])
if len(self._started) == len(self._procs):
Bus.publish(self, "_ready")
self._ready=True
def _hbeat(self, *p):
""" Heart-beat from Main process
"""
self._beat_count=0
if self._termSent:
return
if self._term:
self._termSent=True
Bus.publish(self, "%log", "warning", "SIGTERM received, proc(%s)" % self.pname)
Bus.publish(self, "_sigterm", self.pname)
def _hstart(self):
""" Handler for "start" message
marking the debut of all registered processes
"""
for proc_name in self._procs:
procDetails=self._procs[proc_name]
try: proc=procDetails["proc"]
except: raise RuntimeError("procDetails require a `proc` entry")
try:
Bus.publish(self, "%log", "< starting process(%s)" % procDetails["name"])
proc.start()
Bus.publish(self, "%log", "> started process(%s)" % procDetails["name"])
except Exception,e:
raise RuntimeError("Exception whilst starting process (%s)" % e)
def _sendToSubscribers(self, mtype, spname, msgTail):
msg=[mtype, spname]
msg.extend(msgTail)
subs=self._subs.get(mtype, [])
#print "mswitch._sendToSubscribers: mtype(%s) subs: %s " % (mtype, subs)
for pname in subs:
if pname==spname:# or pname==self.MAIN_PNAME:
continue
if pname==self.MAIN_PNAME:
Bus.publish(self, mtype, *tuple(msgTail))
else:
#print "mswitch._sendToSubscribers: mtype(%s) pname(%s) msg(%s)" % (mtype, pname, msg)
q=self._getQueue(pname)
q.put(msg)
def _hpumpMain(self, mtype, spname, msg):
#print "@@ mswitch._hpumpMain: mtype(%s) spname(%s)" % (mtype, spname)
if mtype=="_started":
Bus.publish(self, "started", spname)
return
if mtype=="_sub":
try: msgtype=msg.pop(0)
except:
raise RuntimeError("missing `msgType` from `_sub` message")
self._addSub(spname, msgtype)
#print "*** mswitch._hpumpMain: subscribing to msgtype: ", msgtype
## repeat source message
self._sendSplitHorizon(mtype, spname, [msgtype])
return
self._sendToSubscribers(mtype, spname, msg)
def doRun(self):
print "TestProcRx.doRun (%s) pid(%s)" % (self.name, os.getpid())
Bus.publish(self, "log", "doRun: starting (%s) pid(%s)" % (self.name, os.getpid()))
while not self.is_SigTerm() and not self.is_bark() and not self.is_shutdown():
try:
Bus.publish(self, "mswitch_pump")
except Exception,e:
Bus.publish(self, "log", "*** (%s) Comm Exception: %s" % (self.name, e))
Bus.publish(self, "shutdown")
print "getMsg, exception: ", e
break
sleep(0.01)
def run(self):
""" Called by the multiprocessing module
once the process is ready to run i.e. after the "fork"
We intercept this call in order to make the
final preparation before handing the control
to the user process
"""
## For now, there isn't that much to do
## except to reset the process level Message Bus
## to a known start state
Bus.reset()
Bus.subscribe("_ready", self._hready)
## Announce to the Agents we are starting and, incidentally,
## that "we" are a "Child" process
Bus.publish(self, "proc_starting", (self.name, self.pqueue))
Bus.subscribe("beat", self._hbeat)
Bus.subscribe("shutdown", self._hshutdown)
return self.doRun()
def _hlbeat(self, *p):
""" Process-local Heart-Beat
"""
if self._barked:
return
self._beat_count=self._beat_count+1
if self._beat_count >= self.MISSING_BEATS:
Bus.publish(self, "%log", "warning", "watchdog expired, proc(%s)" % self.pname)
Bus.publish(self, "%bark", self.pname)
self._barked=True
Bus.publish(self, "alive", self.pname)
def __init__(self, name):
Process.__init__(self)
self.pqueue=Queue()
self.name=name
self.term=False
self.bark=False
self._shutdown=False
Bus.subscribe("%bark", self._hbark)
Bus.subscribe("_sigterm", self._hsigterm)
## Publish the proc's details over the local message bus
## The ProcessManager will need those details in order to
## launch the process later on.
Bus.publish(self, "proc", {"proc":self, "name":name, "queue":self.pqueue})
def _hbeat(self, _):
""" Local "beat" message-type
"""
if self.is_child:
return
if self._termSent or self._shutdown_initiated:
return
if self._term:
Bus.publish(self, "%log", "warning", "SIGTERM received, Main Proc")
Bus.publish(self, "shutdown")
self._shutdown_initiated=True
if not self._subToAlive:
if self._ready:
self._subToAlive=True
Bus.subscribe("alive", self._halive)
### Make sure we have a response from each of the
### Child processes within the Time Interval
self._beat_count=self._beat_count+1
if self._beat_count == self.BEATS_THRESHOLD:
self._beat_count=0
if len(self.alives) != len(self._procs):
Bus.publish(self, "%log", "warning", "child process(es) missing")
Bus.publish(self, "%bark", self.pname)
Bus.publish(self, "shutdown")
self._shutdown_initiated
self.alives=[]
Bus.publish(self, "_sigterm", self.pname)
def _hproc_starting(self, (pname, _)):
self._beat_count=0
self.is_child=True
self.pname=pname
signal.signal(signal.SIGTERM, self._sterm)
### Only subscribe to the signals
### when we know we are a Child process
Bus.subscribe("beat", _cwd._hbeat)
Bus.subscribe("%beat", _cwd._hlbeat)
_cwd=Child_WatchDogAgent()
Bus.subscribe("proc_starting", _cwd._hproc_starting)
class Main_WatchDogAgent(object):
BEATS_THRESHOLD = 3
def __init__(self):
self.pname="__main__"
self._subToAlive=False
self._ready=False
self.alives=[]
self.is_child=False
def _qpname(self):
""" Answer for the question "pname?"
"""
Bus.publish(self, "pname", self._name)
proc.update(procDetails)
self._procs[name]=proc
def _hstart(self):
""" Handler for "start" message
marking the debut of all registered processes
"""
for proc_name in self._procs:
procDetails=self._procs[proc_name]
try: proc=procDetails["proc"]
except: raise RuntimeError("procDetails require a `proc` entry")
try:
Bus.publish(self, "%log", "< starting process(%s)" % procDetails["name"])
proc.start()
Bus.publish(self, "%log", "> started process(%s)" % procDetails["name"])
except Exception,e:
raise RuntimeError("Exception whilst starting process (%s)" % e)
## ======================================================================================
## ======================================================================================
_pm=ProcessManager()
Bus.subscribe("start", _pm._hstart)
Bus.subscribe("proc", _pm._hproc)
Bus.subscribe("pname?", _pm._qpname)
Bus.subscribe("proc_starting", _pm._hproc_starting)
def hready(self):
print "TestProcRx (%s) ready!" % self.name
self.ready=True
Bus.subscribe("tick", self._htick)
def doRun(self):
print "TestProc.doRun (%s)" % self.name
Bus.publish(self, "log", "starting (%s) pid(%s)" % (self.name, os.getpid()))
try:
while not self.is_SigTerm() and not self.is_bark() and not self.is_shutdown():
Bus.publish(self, "mswitch_pump")
#print "tick (%s)" % self.name
Bus.publish(self, "tick", self.name, os.getpid())
sleep(0.150+0.150*random.random())
print ">>> Exiting (%s) <<<" % self.name
except Exception,e:
Bus.publish(self, "log", "*** (%s) Comm Exception: %s" % (self.name, e))
print "TestProc: Exiting (%s)" % self.name
Bus.publish(self, "log", "Exiting (%s)" % e)
Bus.publish(self, "shutdown")
sys.path.insert(0, ppkg)
class _Printer(object):
def __call__(self, msg):
print "!Bus: ", msg
from pymultiproc.system.mbus import Bus
from pymultiproc.system.process import ProcessClass
from phidgetsdbus.agents import *
Bus.logger=_Printer()
#Bus.debug=True
Bus.publish(None, "logpath", "tmswitch", "~/tmswitch.log")
class TestProc(ProcessClass):
def __init__(self, name):
ProcessClass.__init__(self, name)
def hready(self):
print "TestProc (%s) ready!" % self.name
def doRun(self):
print "TestProc.doRun (%s)" % self.name
Bus.publish(self, "log", "starting (%s) pid(%s)" % (self.name, os.getpid()))
try:
while not self.is_SigTerm() and not self.is_bark() and not self.is_shutdown():
Bus.publish(self, "mswitch_pump")
self._logger.setLevel(logging.INFO)
def _hlogpath(self, name, path):
self._path = path
self._name = name
self._setup()
def _hlog(self, *arg):
if self._shutdown:
return
if self._logger is None:
self._setup()
if len(arg) == 1:
self._logger.log(logging.INFO, arg[0])
else:
level = self.mlevel.get(arg[0], logging.INFO)
self._logger.log(level, arg[1])
def _hshutdown(self, *arg):
self._shutdown = True
self._logger = None
logging.shutdown([self.fhdlr])
_log = Logger()
Bus.subscribe("%log", _log._hlog)
Bus.subscribe("logpath", _log._hlogpath)
Bus.subscribe("shutdown", _log._hshutdown)
def _getQueue(self, pname):
try: details=self._procs[pname]
except:
raise RuntimeError("missing proc from proc list")
try: q=details["queue"]
except:
raise RuntimeError("missing `queue` parameter for proc(%s)" % pname)
return q
## ===============================================================================
## ===============================================================================
_mswitch=MessageSwitch()
Bus.subscribe("*", _mswitch._promiscuousHandler)
Bus.subscribe("_sigterm", _mswitch._hsigterm)
Bus.subscribe("_sub", _mswitch._hsub)
Bus.subscribe("proc", _mswitch._hproc)
Bus.subscribe("_ready", _mswitch._hready)
Bus.subscribe("mswitch_pump", _mswitch._hpump)
Bus.subscribe("mswitch_params", _mswitch._hparams)
Bus.subscribe("proc_starting", _mswitch._hproc_starting)
def _tick(self):
self._beat=True ## atomic assignment
def _qbeat(self):
if self._beat:
if self._child:
Bus.publish(self, "%beat", self.pname)
else:
Bus.publish(self, "beat", self.pname)
self._beat=False ## atomic assignment
_heart=HeartAgent()
Bus.subscribe("%beat?", _heart._qbeat)
Bus.subscribe("proc_starting", _heart._hproc_starting)
## =====================================================
if __name__=="__main__":
from time import sleep
Bus.debug=True
class Cb(object):
def beat(self, state):
