def findStampFileName(name, currentFileName=''):
invalidChars = QRegularExpression("[^\\w -]+")
prefs = preferences.Preferences.instance()
stampsDir = QDir(prefs.stampsDirectory())
suggestedFileName = name.toLower().remove(invalidChars)
fileName = suggestedFileName + ".stamp"
if (fileName == currentFileName or not stampsDir.exists(fileName)):
return fileName
n = 2
while (fileName != currentFileName and stampsDir.exists(fileName)):
fileName = suggestedFileName + QString.number(n) + ".stamp"
n += 1
return fileName
def findStampFileName(name, currentFileName=''):
invalidChars = QRegularExpression("[^\\w -]+")
prefs = preferences.Preferences.instance()
stampsDir = QDir(prefs.stampsDirectory())
suggestedFileName = name.toLower().remove(invalidChars)
fileName = suggestedFileName + ".stamp"
if (fileName == currentFileName or not stampsDir.exists(fileName)):
return fileName
n = 2
while (fileName != currentFileName and stampsDir.exists(fileName)):
fileName = suggestedFileName + QString.number(n) + ".stamp"
n += 1
return fileName
def write(self, map, fileName):
file = QSaveFile(fileName)
if (not file.open(QIODevice.WriteOnly | QIODevice.Text)):
self.mError = self.tr("Could not open file for writing.")
return False
out = QTextStream(file)
# Write the header
header = map.property("header")
for line in header.split("\\n"):
out << line << '\n'
width = map.width()
height = map.height()
asciiMap = QList()
cachedTiles = QHash()
propertyOrder = QList()
propertyOrder.append("terrain")
propertyOrder.append("object")
propertyOrder.append("actor")
propertyOrder.append("trap")
propertyOrder.append("status")
propertyOrder.append("spot")
# Ability to handle overflow and strings for display
outputLists = False
asciiDisplay = ASCII_MIN
overflowDisplay = 1
# Add the empty tile
numEmptyTiles = 0
emptyTile = Properties()
emptyTile["display"] = "?"
cachedTiles["?"] = emptyTile
# Process the map, collecting used display strings as we go
for y in range(0, height):
for x in range(0, width):
currentTile = cachedTiles["?"]
for layer in map.layers():
# If the layer name does not start with one of the tile properties, skip it
layerKey = ''
for currentProperty in propertyOrder:
if (layer.name().lower().startswith(
currentProperty.lower())):
layerKey = currentProperty
break
if layerKey == '':
continue
tileLayer = layer.asTileLayer()
objectLayer = layer.asObjectGroup()
# Process the Tile Layer
if (tileLayer):
tile = tileLayer.cellAt(x, y).tile
if (tile):
currentTile["display"] = tile.property("display")
currentTile[layerKey] = tile.property("value")
# Process the Object Layer
elif (objectLayer):
for obj in objectLayer.objects():
if (math.floor(obj.y()) <= y and
y <= math.floor(obj.y() + obj.height())):
if (math.floor(obj.x()) <= x and x <=
math.floor(obj.x() + obj.width())):
# Check the Object Layer properties if either display or value was missing
if (not obj.property("display").isEmpty()):
currentTile["display"] = obj.property(
"display")
elif (not objectLayer.property(
"display").isEmpty()):
currentTile[
"display"] = objectLayer.property(
"display")
if (not obj.property("value").isEmpty()):
currentTile[layerKey] = obj.property(
"value")
elif (not objectLayer.property(
"value").isEmpty()):
currentTile[
layerKey] = objectLayer.property(
"value")
# If the currentTile does not exist in the cache, add it
if (not cachedTiles.contains(currentTile["display"])):
cachedTiles[currentTile["display"]] = currentTile
# Otherwise check that it EXACTLY matches the cached one
# and if not...
elif (currentTile != cachedTiles[currentTile["display"]]):
# Search the cached tiles for a match
foundInCache = False
displayString = QString()
for i in cachedTiles.items():
displayString = i[0]
currentTile["display"] = displayString
if (currentTile == i[1]):
foundInCache = True
break
# If we haven't found a match then find a random display string
# and cache it
if (not foundInCache):
while (True):
# First try to use the ASCII characters
if (asciiDisplay < ASCII_MAX):
displayString = asciiDisplay
asciiDisplay += 1
# Then fall back onto integers
else:
displayString = QString.number(overflowDisplay)
overflowDisplay += 1
currentTile["display"] = displayString
if (not cachedTiles.contains(displayString)):
cachedTiles[displayString] = currentTile
break
elif (currentTile == cachedTiles[
currentTile["display"]]):
break
# Check the output type
if len(currentTile["display"]) > 1:
outputLists = True
# Check if we are still the emptyTile
if (currentTile == emptyTile):
numEmptyTiles += 1
# Finally add the character to the asciiMap
asciiMap.append(currentTile["display"])
# Write the definitions to the file
out << "-- defineTile section\n"
for i in cachedTiles.items():
displayString = i[0]
# Only print the emptyTile definition if there were empty tiles
if (displayString == "?" and numEmptyTiles == 0):
continue
# Need to escape " and \ characters
displayString.replace('\\', "\\\\")
displayString.replace('"', "\\\"")
args = self.constructArgs(i[1], propertyOrder)
if (not args.isEmpty()):
args = QString(", %1").arg(args)
out << "defineTile(\"%s\"%s)\n" % (displayString, args)
# Check for an ObjectGroup named AddSpot
out << "\n-- addSpot section\n"
for layer in map.layers():
objectLayer = layer.asObjectGroup()
if (objectLayer
and objectLayer.name().lower().startsWith("addspot")):
for obj in objectLayer.objects():
propertyOrder = QList()
propertyOrder.append("type")
propertyOrder.append("subtype")
propertyOrder.append("additional")
args = self.constructArgs(obj.properties(), propertyOrder)
if (not args.isEmpty()):
args = QString(", %1").arg(args)
for y in range(math.floor(obj.y()),
math.floor(obj.y() + obj.height())):
for y in range(math.floor(obj.x()),
math.floor(obj.x() + obj.width())):
out << "addSpot({%s, %s}%s)\n" % (x, y, args)
# Check for an ObjectGroup named AddZone
out << "\n-- addZone section\n"
for layer in map.layers():
objectLayer = layer.asObjectGroup()
if (objectLayer
and objectLayer.name().lower().startsWith("addzone")):
for obj in objectLayer.objects():
propertyOrder = QList()
propertyOrder.append("type")
propertyOrder.append("subtype")
propertyOrder.append("additional")
args = self.constructArgs(obj.properties(), propertyOrder)
if (not args.isEmpty()):
args = QString(", %1").arg(args)
top_left_x = math.floor(obj.x())
top_left_y = math.floor(obj.y())
bottom_right_x = math.floor(obj.x() + obj.width())
bottom_right_y = math.floor(obj.y() + obj.height())
out << "addZone({%s, %s, %s, %s}%s)" % (
top_left_x, top_left_y, bottom_right_x, bottom_right_y,
args)
# Write the map
returnStart = QString()
returnStop = QString()
lineStart = QString()
lineStop = QString()
itemStart = QString()
itemStop = QString()
seperator = QString()
if (outputLists):
returnStart = "{"
returnStop = "}"
lineStart = "{"
lineStop = "},"
itemStart = "[["
itemStop = "]]"
seperator = ","
else:
returnStart = "[["
returnStop = "]]"
lineStart = ""
lineStop = ""
itemStart = ""
itemStop = ""
seperator = ""
out << "\n-- ASCII map section\n"
out << "return " << returnStart << '\n'
for y in range(0, height):
out << lineStart
for x in range(0, width):
out << itemStart << asciiMap[x +
(y *
width)] << itemStop << seperator
if (y == height - 1):
out << lineStop << returnStop
else:
out << lineStop << '\n'
if not file.commit():
self.mError = file.errorString()
return False
return True
def read(self, fileName):
# Read data.
file = QFile(fileName)
if (not file.open(QIODevice.ReadOnly)):
self.mError = self.tr("Cannot open Replica Island map file!")
return 0
_in = QDataStream(file)
_in.setByteOrder(QDataStream.LittleEndian)
_in.setFloatingPointPrecision(QDataStream.SinglePrecision)
# Parse file header.
mapSignature = _in.readUInt8()
layerCount = _in.readUInt8()
backgroundIndex = _in.readUInt8()
if (_in.status() == QDataStream.ReadPastEnd or mapSignature != 96):
self.mError = self.tr("Can't parse file header!")
return 0
# Create our map, setting width and height to 0 until we load a layer.
map = Map(Map.Orientation.Orthogonal, 0, 0, 32, 32)
map.setProperty("background_index", QString.number(backgroundIndex))
# Load our Tilesets.
typeTilesets = QVector()
tileIndexTilesets = QVector()
self.loadTilesetsFromResources(map, typeTilesets, tileIndexTilesets)
# Load each of our layers.
for i in range(layerCount):
# Parse layer header.
_type = _in.readUInt8()
tileIndex = _in.readUInt8()
scrollSpeed = _in.readFloat()
levelSignature = _in.readUInt8()
width = _in.readUInt32()
height = _in.readUInt32()
if (_in.status() == QDataStream.ReadPastEnd or levelSignature != 42):
self.mError = self.tr("Can't parse layer header!")
return 0
# Make sure our width and height are consistent.
if (map.width() == 0):
map.setWidth(width)
if (map.height() == 0):
map.setHeight(height)
if (map.width() != width or map.height() != height):
self.mError = self.tr("Inconsistent layer sizes!")
return 0
# Create a layer object.
layer = TileLayer(self.layerTypeToName(_type), 0, 0, width, height)
layer.setProperty("type", QString.number(_type))
layer.setProperty("tile_index", QString.number(tileIndex))
layer.setProperty("scroll_speed", QString.number(scrollSpeed, 'f'))
map.addLayer(layer)
# Look up the tileset for this layer.
tileset = tilesetForLayer(_type, tileIndex, typeTilesets, tileIndexTilesets)
# Read our tile data all at once.
#tileData = QByteArray(width*height, b'\x00')
bytesNeeded = width*height
tileData = _in.readRawData(bytesNeeded)
bytesRead = len(tileData)
if (bytesRead != bytesNeeded):
self.mError = self.tr("File ended in middle of layer!")
return 0
i = 0
# Add the tiles to our layer.
for y in range(0, height):
for x in range(0, width):
tile_id = tileData[i]&0xff
i += 1
if (tile_id != 255):
tile = tileset.tileAt(tile_id)
layer.setCell(x, y, Cell(tile))
# Make sure we read the entire *.bin file.
if (_in.status() != QDataStream.Ok or not _in.atEnd()):
self.mError = self.tr("Unexpected data at end of file!")
return 0
return map
def write(self, map, fileName):
file = QSaveFile(fileName)
if (not file.open(QIODevice.WriteOnly | QIODevice.Text)) :
self.mError = self.tr("Could not open file for writing.")
return False
out = QTextStream(file)
# Write the header
header = map.property("header")
for line in header.split("\\n"):
out << line << '\n'
width = map.width()
height = map.height()
asciiMap = QList()
cachedTiles = QHash()
propertyOrder = QList()
propertyOrder.append("terrain")
propertyOrder.append("object")
propertyOrder.append("actor")
propertyOrder.append("trap")
propertyOrder.append("status")
propertyOrder.append("spot")
# Ability to handle overflow and strings for display
outputLists = False
asciiDisplay = ASCII_MIN
overflowDisplay = 1
# Add the empty tile
numEmptyTiles = 0
emptyTile = Properties()
emptyTile["display"] = "?"
cachedTiles["?"] = emptyTile
# Process the map, collecting used display strings as we go
for y in range(0, height):
for x in range(0, width):
currentTile = cachedTiles["?"]
for layer in map.layers():
# If the layer name does not start with one of the tile properties, skip it
layerKey = ''
for currentProperty in propertyOrder:
if (layer.name().lower().startswith(currentProperty.lower())) :
layerKey = currentProperty
break
if layerKey == '':
continue
tileLayer = layer.asTileLayer()
objectLayer = layer.asObjectGroup()
# Process the Tile Layer
if (tileLayer) :
tile = tileLayer.cellAt(x, y).tile
if (tile) :
currentTile["display"] = tile.property("display")
currentTile[layerKey] = tile.property("value")
# Process the Object Layer
elif (objectLayer) :
for obj in objectLayer.objects():
if (math.floor(obj.y()) <= y and y <= math.floor(obj.y() + obj.height())) :
if (math.floor(obj.x()) <= x and x <= math.floor(obj.x() + obj.width())) :
# Check the Object Layer properties if either display or value was missing
if (not obj.property("display").isEmpty()) :
currentTile["display"] = obj.property("display")
elif (not objectLayer.property("display").isEmpty()) :
currentTile["display"] = objectLayer.property("display")
if (not obj.property("value").isEmpty()) :
currentTile[layerKey] = obj.property("value")
elif (not objectLayer.property("value").isEmpty()) :
currentTile[layerKey] = objectLayer.property("value")
# If the currentTile does not exist in the cache, add it
if (not cachedTiles.contains(currentTile["display"])) :
cachedTiles[currentTile["display"]] = currentTile
# Otherwise check that it EXACTLY matches the cached one
# and if not...
elif (currentTile != cachedTiles[currentTile["display"]]) :
# Search the cached tiles for a match
foundInCache = False
displayString = QString()
for i in cachedTiles.items():
displayString = i[0]
currentTile["display"] = displayString
if (currentTile == i[1]) :
foundInCache = True
break
# If we haven't found a match then find a random display string
# and cache it
if (not foundInCache) :
while (True) :
# First try to use the ASCII characters
if (asciiDisplay < ASCII_MAX) :
displayString = asciiDisplay
asciiDisplay += 1
# Then fall back onto integers
else :
displayString = QString.number(overflowDisplay)
overflowDisplay += 1
currentTile["display"] = displayString
if (not cachedTiles.contains(displayString)) :
cachedTiles[displayString] = currentTile
break
elif (currentTile == cachedTiles[currentTile["display"]]) :
break
# Check the output type
if len(currentTile["display"]) > 1:
outputLists = True
# Check if we are still the emptyTile
if (currentTile == emptyTile) :
numEmptyTiles += 1
# Finally add the character to the asciiMap
asciiMap.append(currentTile["display"])
# Write the definitions to the file
out << "-- defineTile section\n"
for i in cachedTiles.items():
displayString = i[0]
# Only print the emptyTile definition if there were empty tiles
if (displayString == "?" and numEmptyTiles == 0) :
continue
# Need to escape " and \ characters
displayString.replace('\\', "\\\\")
displayString.replace('"', "\\\"")
args = self.constructArgs(i[1], propertyOrder)
if (not args.isEmpty()) :
args = QString(", %1").arg(args)
out << "defineTile(\"%s\"%s)\n"%(displayString, args)
# Check for an ObjectGroup named AddSpot
out << "\n-- addSpot section\n"
for layer in map.layers():
objectLayer = layer.asObjectGroup()
if (objectLayer and objectLayer.name().lower().startsWith("addspot")):
for obj in objectLayer.objects():
propertyOrder = QList()
propertyOrder.append("type")
propertyOrder.append("subtype")
propertyOrder.append("additional")
args = self.constructArgs(obj.properties(), propertyOrder)
if (not args.isEmpty()) :
args = QString(", %1").arg(args)
for y in range(math.floor(obj.y()), math.floor(obj.y() + obj.height())):
for y in range(math.floor(obj.x()), math.floor(obj.x() + obj.width())):
out << "addSpot({%s, %s}%s)\n"%(x, y, args)
# Check for an ObjectGroup named AddZone
out << "\n-- addZone section\n"
for layer in map.layers():
objectLayer = layer.asObjectGroup()
if (objectLayer and objectLayer.name().lower().startsWith("addzone")):
for obj in objectLayer.objects():
propertyOrder = QList()
propertyOrder.append("type")
propertyOrder.append("subtype")
propertyOrder.append("additional")
args = self.constructArgs(obj.properties(), propertyOrder)
if (not args.isEmpty()) :
args = QString(", %1").arg(args)
top_left_x = math.floor(obj.x())
top_left_y = math.floor(obj.y())
bottom_right_x = math.floor(obj.x() + obj.width())
bottom_right_y = math.floor(obj.y() + obj.height())
out << "addZone({%s, %s, %s, %s}%s)"%(top_left_x, top_left_y, bottom_right_x, bottom_right_y, args)
# Write the map
returnStart = QString()
returnStop = QString()
lineStart = QString()
lineStop = QString()
itemStart = QString()
itemStop = QString()
seperator = QString()
if (outputLists) :
returnStart = "{"
returnStop = "}"
lineStart = "{"
lineStop = "},"
itemStart = "[["
itemStop = "]]"
seperator = ","
else :
returnStart = "[["
returnStop = "]]"
lineStart = ""
lineStop = ""
itemStart = ""
itemStop = ""
seperator = ""
out << "\n-- ASCII map section\n"
out << "return " << returnStart << '\n'
for y in range(0, height):
out << lineStart
for x in range(0, width):
out << itemStart << asciiMap[x + (y * width)] << itemStop << seperator
if (y == height - 1):
out << lineStop << returnStop
else :
out << lineStop << '\n'
if not file.commit():
self.mError = file.errorString()
return False
return True
def __toVariant(self, *args):
l = len(args)
if l==1:
arg = args[0]
tp = type(arg)
if tp == Properties:
properties = arg
variantMap = {}
for it in properties:
variantMap[it[0]] = it[1]
return variantMap
elif tp == ObjectGroup:
objectGroup = arg
objectGroupVariant = {}
objectGroupVariant["type"] = "objectgroup"
if (objectGroup.color().isValid()):
objectGroupVariant["color"] = objectGroup.color().name()
objectGroupVariant["draworder"] = drawOrderToString(objectGroup.drawOrder())
self.addLayerAttributes(objectGroupVariant, objectGroup)
objectVariants = []
for object in objectGroup.objects():
objectVariant = {}
name = object.name()
_type = object.type()
objectVariant["properties"] = self.__toVariant(object.properties())
objectVariant["id"] = object.id()
objectVariant["name"] = name
objectVariant["type"] = _type
if (not object.cell().isEmpty()):
objectVariant["gid"] = self.mGidMapper.cellToGid(object.cell())
objectVariant["x"] = object.x()
objectVariant["y"] = object.y()
objectVariant["width"] = object.width()
objectVariant["height"] = object.height()
objectVariant["rotation"] = object.rotation()
objectVariant["visible"] = object.isVisible()
## Polygons are stored in this format:
#
# "polygon/polyline": [
# { "x": 0, "y": 0 },
# { "x": 1, "y": 1 },
# ...
# ]
##
polygon = object.polygon()
if (not polygon.isEmpty()) :
pointVariants = []
for point in polygon:
pointVariant = {}
pointVariant["x"] = point.x()
pointVariant["y"] = point.y()
pointVariants.append(pointVariant)
if (object.shape() == MapObject.Polygon):
objectVariant["polygon"] = pointVariants
else:
objectVariant["polyline"] = pointVariants
if (object.shape() == MapObject.Ellipse):
objectVariant["ellipse"] = True
objectVariants.append(objectVariant)
objectGroupVariant["objects"] = objectVariants
return objectGroupVariant
elif tp == ImageLayer:
imageLayer = arg
imageLayerVariant = {}
imageLayerVariant["type"] = "imagelayer"
self.addLayerAttributes(imageLayerVariant, imageLayer)
rel = self.mMapDir.relativeFilePath(imageLayer.imageSource())
imageLayerVariant["image"] = rel
transColor = imageLayer.transparentColor()
if (transColor.isValid()):
imageLayerVariant["transparentcolor"] = transColor.name()
return imageLayerVariant
elif l==2:
arg1, arg2 = args
tp1 = type(arg1)
tp2 = type(arg2)
if tp1==Tileset and tp2==int:
tileset, firstGid = arg1, arg2
tilesetVariant = {}
if firstGid > 0:
tilesetVariant["firstgid"] = firstGid
fileName = tileset.fileName()
if fileName != '':
source = self.mMapDir.relativeFilePath(fileName)
tilesetVariant["source"] = source
# Tileset is external, so no need to write any of the stuff below
return tilesetVariant
tilesetVariant["firstgid"] = firstGid
tilesetVariant["name"] = tileset.name()
tilesetVariant["tilewidth"] = tileset.tileWidth()
tilesetVariant["tileheight"] = tileset.tileHeight()
tilesetVariant["spacing"] = tileset.tileSpacing()
tilesetVariant["margin"] = tileset.margin()
tilesetVariant["tilecount"] = tileset.tileCount()
tilesetVariant["properties"] = self.__toVariant(tileset.properties())
offset = tileset.tileOffset()
if (not offset.isNull()) :
tileOffset = {}
tileOffset["x"] = offset.x()
tileOffset["y"] = offset.y()
tilesetVariant["tileoffset"] = tileOffset
# Write the image element
imageSource = tileset.imageSource()
if imageSource != '':
rel = self.mMapDir.relativeFilePath(tileset.imageSource())
tilesetVariant["image"] = rel
transColor = tileset.transparentColor()
if (transColor.isValid()):
tilesetVariant["transparentcolor"] = transColor.name()
tilesetVariant["imagewidth"] = tileset.imageWidth()
tilesetVariant["imageheight"] = tileset.imageHeight()
##
# Write the properties, terrain, external image, object group and
# animation for those tiles that have them.
##
tilePropertiesVariant = {}
tilesVariant = {}
for i in range(0, tileset.tileCount()):
tile = tileset.tileAt(i)
properties = tile.properties()
if (not properties.isEmpty()):
tilePropertiesVariant[QString.number(i)] = self.__toVariant(properties)
tileVariant = {}
if (tile.terrain() != 0xFFFFFFFF) :
terrainIds = []
for j in range(0, 4):
terrainIds.append(tile.cornerTerrainId(j))
tileVariant["terrain"] = terrainIds
if (tile.probability() != 1.0):
tileVariant["probability"] = tile.probability()
if tile.imageSource() != '':
rel = self.mMapDir.relativeFilePath(tile.imageSource())
tileVariant["image"] = rel
if (tile.objectGroup()):
tileVariant["objectgroup"] = self.__toVariant(tile.objectGroup())
if (tile.isAnimated()) :
frameVariants = []
for frame in tile.frames():
frameVariant = {}
frameVariant["tileid"] = frame.tileId
frameVariant["duration"] = frame.duration
frameVariants.append(frameVariant)
tileVariant["animation"] = frameVariants
if len(tileVariant) > 0:
tilesVariant[QString.number(i)] = tileVariant
if len(tilePropertiesVariant) > 0:
tilesetVariant["tileproperties"] = tilePropertiesVariant
if len(tilesVariant) > 0:
tilesetVariant["tiles"] = tilesVariant
# Write terrains
if (tileset.terrainCount() > 0) :
terrainsVariant = []
for i in range(0, tileset.terrainCount()):
terrain = tileset.terrain(i)
properties = terrain.properties()
terrainVariant = {}
terrainVariant["name"] = terrain.name()
if (not properties.isEmpty()):
terrainVariant["properties"] = self.__toVariant(properties)
terrainVariant["tile"] = terrain.imageTileId()
terrainsVariant.append(terrainVariant)
tilesetVariant["terrains"] = terrainsVariant
return tilesetVariant
elif tp1==TileLayer and tp2==Map.LayerDataFormat:
tileLayer, format = arg1, arg2
tileLayerVariant = {}
tileLayerVariant["type"] = "tilelayer"
self.addLayerAttributes(tileLayerVariant, tileLayer)
if format == Map.LayerDataFormat.XML or format == Map.LayerDataFormat.CSV:
tileVariants = []
for y in range(tileLayer.height()):
for x in range(tileLayer.width()):
tileVariants.append(self.mGidMapper.cellToGid(tileLayer.cellAt(x, y)))
tileLayerVariant["data"] = tileVariants
elif format in [Map.LayerDataFormat.Base64, Map.LayerDataFormat.Base64Zlib, Map.LayerDataFormat.Base64Gzip]:
tileLayerVariant["encoding"] = "base64"
if format == Map.LayerDataFormat.Base64Zlib:
tileLayerVariant["compression"] = "zlib"
elif format == Map.LayerDataFormat.Base64Gzip:
tileLayerVariant["compression"] = "gzip"
layerData = self.mGidMapper.encodeLayerData(tileLayer, format)
tileLayerVariant["data"] = layerData.data().decode()
return tileLayerVariant
def writeTileset(self, writer, tileset, firstGid):
writer.writeStartTable()
writer.writeKeyAndValue("name", tileset.name())
writer.writeKeyAndValue("firstgid", firstGid)
if tileset.fileName() != '':
rel = self.mMapDir.relativeFilePath(tileset.fileName())
writer.writeKeyAndValue("filename", rel)
##
# Include all tileset information even for external tilesets, since the
# external reference is generally a .tsx file (in XML format).
##
writer.writeKeyAndValue("tilewidth", tileset.tileWidth())
writer.writeKeyAndValue("tileheight", tileset.tileHeight())
writer.writeKeyAndValue("spacing", tileset.tileSpacing())
writer.writeKeyAndValue("margin", tileset.margin())
if tileset.imageSource() != '':
rel = self.mMapDir.relativeFilePath(tileset.imageSource())
writer.writeKeyAndValue("image", rel)
writer.writeKeyAndValue("imagewidth", tileset.imageWidth())
writer.writeKeyAndValue("imageheight", tileset.imageHeight())
if (tileset.transparentColor().isValid()):
writer.writeKeyAndValue("transparentcolor",tileset.transparentColor().name())
offset = tileset.tileOffset()
writer.writeStartTable("tileoffset")
writer.writeKeyAndValue("x", offset.x())
writer.writeKeyAndValue("y", offset.y())
writer.writeEndTable()
self.writeProperties(writer, tileset.properties())
writer.writeStartTable("terrains")
for i in range(tileset.terrainCount()):
t = tileset.terrain(i)
writer.writeStartTable()
writer.writeKeyAndValue("name", t.name())
writer.writeKeyAndValue("tile", t.imageTileId())
self.writeProperties(writer, t.properties())
writer.writeEndTable()
writer.writeEndTable()
writer.writeKeyAndValue("tilecount", tileset.tileCount())
writer.writeStartTable("tiles")
for i in range(0, tileset.tileCount()):
tile = tileset.tileAt(i)
# For brevity only write tiles with interesting properties
if (not includeTile(tile)):
continue
writer.writeStartTable()
writer.writeKeyAndValue("id", i)
if (not tile.properties().isEmpty()):
self.writeProperties(writer, tile.properties())
if tile.imageSource() != '':
src = self.mMapDir.relativeFilePath(tile.imageSource())
tileSize = tile.size()
writer.writeKeyAndValue("image", src)
if (not tileSize.isNull()) :
writer.writeKeyAndValue("width", tileSize.width())
writer.writeKeyAndValue("height", tileSize.height())
terrain = tile.terrain()
if (terrain != 0xFFFFFFFF) :
writer.writeStartTable("terrain")
writer.setSuppressNewlines(True)
for i in range(0, 4):
writer.writeValue(tile.cornerTerrainId(i))
writer.writeEndTable()
writer.setSuppressNewlines(False)
if (tile.probability() != 1.0):
writer.writeKeyAndValue("probability", tile.probability())
objectGroup = tile.objectGroup()
if objectGroup:
self.writeObjectGroup(writer, objectGroup, "objectGroup")
if (tile.isAnimated()) :
frames = tile.frames()
writer.writeStartTable("animation")
for frame in frames:
writer.writeStartTable()
writer.writeKeyAndValue("tileid", QString.number(frame.tileId))
writer.writeKeyAndValue("duration", QString.number(frame.duration))
writer.writeEndTable()
writer.writeEndTable() # animation
writer.writeEndTable() # tile
writer.writeEndTable() # tiles
writer.writeEndTable() # tileset
def read(self, fileName):
# Read data.
file = QFile(fileName)
if (not file.open(QIODevice.ReadOnly)):
self.mError = self.tr("Cannot open Replica Island map file!")
return 0
_in = QDataStream(file)
_in.setByteOrder(QDataStream.LittleEndian)
_in.setFloatingPointPrecision(QDataStream.SinglePrecision)
# Parse file header.
mapSignature = _in.readUInt8()
layerCount = _in.readUInt8()
backgroundIndex = _in.readUInt8()
if (_in.status() == QDataStream.ReadPastEnd or mapSignature != 96):
self.mError = self.tr("Can't parse file header!")
return 0
# Create our map, setting width and height to 0 until we load a layer.
map = Map(Map.Orientation.Orthogonal, 0, 0, 32, 32)
map.setProperty("background_index", QString.number(backgroundIndex))
# Load our Tilesets.
typeTilesets = QVector()
tileIndexTilesets = QVector()
self.loadTilesetsFromResources(map, typeTilesets, tileIndexTilesets)
# Load each of our layers.
for i in range(layerCount):
# Parse layer header.
_type = _in.readUInt8()
tileIndex = _in.readUInt8()
scrollSpeed = _in.readFloat()
levelSignature = _in.readUInt8()
width = _in.readUInt32()
height = _in.readUInt32()
if (_in.status() == QDataStream.ReadPastEnd
or levelSignature != 42):
self.mError = self.tr("Can't parse layer header!")
return 0
# Make sure our width and height are consistent.
if (map.width() == 0):
map.setWidth(width)
if (map.height() == 0):
map.setHeight(height)
if (map.width() != width or map.height() != height):
self.mError = self.tr("Inconsistent layer sizes!")
return 0
# Create a layer object.
layer = TileLayer(self.layerTypeToName(_type), 0, 0, width, height)
layer.setProperty("type", QString.number(_type))
layer.setProperty("tile_index", QString.number(tileIndex))
layer.setProperty("scroll_speed", QString.number(scrollSpeed, 'f'))
map.addLayer(layer)
# Look up the tileset for this layer.
tileset = tilesetForLayer(_type, tileIndex, typeTilesets,
tileIndexTilesets)
# Read our tile data all at once.
#tileData = QByteArray(width*height, b'\x00')
bytesNeeded = width * height
tileData = _in.readRawData(bytesNeeded)
bytesRead = len(tileData)
if (bytesRead != bytesNeeded):
self.mError = self.tr("File ended in middle of layer!")
return 0
i = 0
# Add the tiles to our layer.
for y in range(0, height):
for x in range(0, width):
tile_id = tileData[i] & 0xff
i += 1
if (tile_id != 255):
tile = tileset.tileAt(tile_id)
layer.setCell(x, y, Cell(tile))
# Make sure we read the entire *.bin file.
if (_in.status() != QDataStream.Ok or not _in.atEnd()):
self.mError = self.tr("Unexpected data at end of file!")
return 0
return map
