def _read(self, iid_index_or_none, sid_index_or_none, order, dtype,
force_python_only, view_ok):
self._run_once()
if order == 'A':
order = 'F'
dtype = np.dtype(dtype)
assert not hasattr(
self,
'ind_used'), "A SnpReader should not have a 'ind_used' attribute"
iid_count_in = self.iid_count
sid_count_in = self.sid_count
if iid_index_or_none is not None:
iid_count_out = len(iid_index_or_none)
iid_index = iid_index_or_none
else:
iid_count_out = iid_count_in
iid_index = list(range(iid_count_in))
if sid_index_or_none is not None:
sid_count_out = len(sid_index_or_none)
sid_index = sid_index_or_none
else:
sid_count_out = sid_count_in
sid_index = list(range(sid_count_in))
if not force_python_only:
from pysnptools.snpreader import wrap_plink_parser
val = np.zeros((iid_count_out, sid_count_out),
order=order,
dtype=dtype)
bed_fn = SnpReader._name_of_other_file(self.filename, "bed", "bed")
if iid_count_in > 0 and sid_count_in > 0:
if dtype == np.float64:
if order == "F":
wrap_plink_parser.readPlinkBedFile2doubleFAAA(
bed_fn.encode('ascii'), iid_count_in, sid_count_in,
self.count_A1, iid_index, sid_index, val)
elif order == "C":
wrap_plink_parser.readPlinkBedFile2doubleCAAA(
bed_fn.encode('ascii'), iid_count_in, sid_count_in,
self.count_A1, iid_index, sid_index, val)
else:
raise Exception(
"order '{0}' not known, only 'F' and 'C'".format(
order))
elif dtype == np.float32:
if order == "F":
wrap_plink_parser.readPlinkBedFile2floatFAAA(
bed_fn.encode('ascii'), iid_count_in, sid_count_in,
self.count_A1, iid_index, sid_index, val)
elif order == "C":
wrap_plink_parser.readPlinkBedFile2floatCAAA(
bed_fn.encode('ascii'), iid_count_in, sid_count_in,
self.count_A1, iid_index, sid_index, val)
else:
raise Exception(
"order '{0}' not known, only 'F' and 'C'".format(
order))
else:
raise Exception(
"dtype '{0}' not known, only float64 and float32".
format(dtype))
else:
if not self.count_A1:
byteZero = 0
byteThree = 2
else:
byteZero = 2
byteThree = 0
# An earlier version of this code had a way to read consecutive SNPs of code in one read. May want
# to add that ability back to the code.
# Also, note that reading with python will often result in non-contiguous memory, so the python standardizers will automatically be used, too.
self._open_bed()
#logging.warn("using pure python plink parser (might be much slower!!)")
val = np.zeros(
((int(np.ceil(0.25 * iid_count_in)) * 4), sid_count_out),
order=order,
dtype=dtype) #allocate it a little big
for SNPsIndex, bimIndex in enumerate(sid_index):
startbit = int(np.ceil(0.25 * iid_count_in) * bimIndex + 3)
self._filepointer.seek(startbit)
nbyte = int(np.ceil(0.25 * iid_count_in))
bytes = np.array(bytearray(
self._filepointer.read(nbyte))).reshape(
(int(np.ceil(0.25 * iid_count_in)), 1), order='F')
val[3::4, SNPsIndex:SNPsIndex + 1] = byteZero
val[3::4, SNPsIndex:SNPsIndex + 1][bytes >= 64] = np.nan
val[3::4, SNPsIndex:SNPsIndex + 1][bytes >= 128] = 1
val[3::4, SNPsIndex:SNPsIndex + 1][bytes >= 192] = byteThree
bytes = np.mod(bytes, 64)
val[2::4, SNPsIndex:SNPsIndex + 1] = byteZero
val[2::4, SNPsIndex:SNPsIndex + 1][bytes >= 16] = np.nan
val[2::4, SNPsIndex:SNPsIndex + 1][bytes >= 32] = 1
val[2::4, SNPsIndex:SNPsIndex + 1][bytes >= 48] = byteThree
bytes = np.mod(bytes, 16)
val[1::4, SNPsIndex:SNPsIndex + 1] = byteZero
val[1::4, SNPsIndex:SNPsIndex + 1][bytes >= 4] = np.nan
val[1::4, SNPsIndex:SNPsIndex + 1][bytes >= 8] = 1
val[1::4, SNPsIndex:SNPsIndex + 1][bytes >= 12] = byteThree
bytes = np.mod(bytes, 4)
val[0::4, SNPsIndex:SNPsIndex + 1] = byteZero
val[0::4, SNPsIndex:SNPsIndex + 1][bytes >= 1] = np.nan
val[0::4, SNPsIndex:SNPsIndex + 1][bytes >= 2] = 1
val[0::4, SNPsIndex:SNPsIndex + 1][bytes >= 3] = byteThree
val = val[iid_index, :] #reorder or trim any extra allocation
if not SnpReader._array_properties_are_ok(val, order, dtype):
val = val.copy(order=order)
self._close_bed()
return val
def read_with_specification(snpset_withbbed,
order="F",
dtype=SP.float64,
force_python_only=False):
# doesn't need to self.run_once() because it is static
decide_once_on_plink_reader()
global WRAPPED_PLINK_PARSER_PRESENT
bed = snpset_withbbed.bed
iid_count_in, iid_count_out, iid_index_out, snp_count_in, snp_count_out, snp_index_out = bed.counts_and_indexes(
snpset_withbbed)
if WRAPPED_PLINK_PARSER_PRESENT and not force_python_only:
from pysnptools.snpreader import wrap_plink_parser
SNPs = SP.zeros((iid_count_out, snp_count_out),
order=order,
dtype=dtype)
bed_fn = bed.basefilename + ".bed"
count_A1 = False
if dtype == SP.float64:
if order == "F":
wrap_plink_parser.readPlinkBedFile2doubleFAAA(
bed_fn, iid_count_in, snp_count_in, count_A1,
iid_index_out, snp_index_out, SNPs)
elif order == "C":
wrap_plink_parser.readPlinkBedFile2doubleCAAA(
bed_fn, iid_count_in, snp_count_in, count_A1,
iid_index_out, snp_index_out, SNPs)
else:
raise Exception(
"order '{0}' not known, only 'F' and 'C'".format(
order))
elif dtype == SP.float32:
if order == "F":
wrap_plink_parser.readPlinkBedFile2floatFAAA(
bed_fn, iid_count_in, snp_count_in, count_A1,
iid_index_out, snp_index_out, SNPs)
elif order == "C":
wrap_plink_parser.readPlinkBedFile2floatCAAA(
bed_fn, iid_count_in, snp_count_in, count_A1,
iid_index_out, snp_index_out, SNPs)
else:
raise Exception(
"dtype '{0}' not known, only float64 and float32".
format(dtype))
else:
# An earlier version of this code had a way to read consecutive SNPs of code in one read. May want
# to add that ability back to the code.
# Also, note that reading with python will often result in non-contigious memory, so the python standardizers will automatically be used, too.
logging.warn(
"using pure python plink parser (might be much slower!!)")
SNPs = SP.zeros(
((int(SP.ceil(0.25 * iid_count_in)) * 4), snp_count_out),
order=order,
dtype=dtype) #allocate it a little big
for SNPsIndex, bimIndex in enumerate(snpset_withbbed):
startbit = int(SP.ceil(0.25 * iid_count_in) * bimIndex + 3)
bed._filepointer.seek(startbit)
nbyte = int(SP.ceil(0.25 * iid_count_in))
bytes = SP.array(bytearray(
bed._filepointer.read(nbyte))).reshape(
(int(SP.ceil(0.25 * iid_count_in)), 1), order='F')
SNPs[3::4, SNPsIndex:SNPsIndex + 1][bytes >= 64] = SP.nan
SNPs[3::4, SNPsIndex:SNPsIndex + 1][bytes >= 128] = 1
SNPs[3::4, SNPsIndex:SNPsIndex + 1][bytes >= 192] = 2
bytes = SP.mod(bytes, 64)
SNPs[2::4, SNPsIndex:SNPsIndex + 1][bytes >= 16] = SP.nan
SNPs[2::4, SNPsIndex:SNPsIndex + 1][bytes >= 32] = 1
SNPs[2::4, SNPsIndex:SNPsIndex + 1][bytes >= 48] = 2
bytes = SP.mod(bytes, 16)
SNPs[1::4, SNPsIndex:SNPsIndex + 1][bytes >= 4] = SP.nan
SNPs[1::4, SNPsIndex:SNPsIndex + 1][bytes >= 8] = 1
SNPs[1::4, SNPsIndex:SNPsIndex + 1][bytes >= 12] = 2
bytes = SP.mod(bytes, 4)
SNPs[0::4, SNPsIndex:SNPsIndex + 1][bytes >= 1] = SP.nan
SNPs[0::4, SNPsIndex:SNPsIndex + 1][bytes >= 2] = 1
SNPs[0::4, SNPsIndex:SNPsIndex + 1][bytes >= 3] = 2
SNPs = SNPs[
iid_index_out, :] #reorder or trim any extra allocation
ret = {
'rs': bed.rs[snp_index_out],
'pos': bed.pos[snp_index_out, :],
'snps': SNPs,
'iid': bed.original_iids[iid_index_out, :]
}
return ret
def read_with_specification(snpset_withbbed, order="F", dtype=SP.float64, force_python_only=False):
# doesn't need to self.run_once() because it is static
decide_once_on_plink_reader()
global WRAPPED_PLINK_PARSER_PRESENT
bed = snpset_withbbed.bed
iid_count_in, iid_count_out, iid_index_out, snp_count_in, snp_count_out, snp_index_out = bed.counts_and_indexes(snpset_withbbed)
if WRAPPED_PLINK_PARSER_PRESENT and not force_python_only:
from pysnptools.snpreader import wrap_plink_parser
SNPs = SP.zeros((iid_count_out, snp_count_out), order=order, dtype=dtype)
bed_fn = bed.basefilename + ".bed"
count_A1 = False
if dtype == SP.float64:
if order=="F":
wrap_plink_parser.readPlinkBedFile2doubleFAAA(bed_fn, iid_count_in, snp_count_in, count_A1, iid_index_out, snp_index_out, SNPs)
elif order=="C":
wrap_plink_parser.readPlinkBedFile2doubleCAAA(bed_fn, iid_count_in, snp_count_in, count_A1, iid_index_out, snp_index_out, SNPs)
else:
raise Exception("order '{0}' not known, only 'F' and 'C'".format(order));
elif dtype == SP.float32:
if order=="F":
wrap_plink_parser.readPlinkBedFile2floatFAAA(bed_fn, iid_count_in, snp_count_in, count_A1, iid_index_out, snp_index_out, SNPs)
elif order=="C":
wrap_plink_parser.readPlinkBedFile2floatCAAA(bed_fn, iid_count_in, snp_count_in, count_A1, iid_index_out, snp_index_out, SNPs)
else:
raise Exception("dtype '{0}' not known, only float64 and float32".format(dtype))
else:
# An earlier version of this code had a way to read consecutive SNPs of code in one read. May want
# to add that ability back to the code.
# Also, note that reading with python will often result in non-contigious memory, so the python standardizers will automatically be used, too.
logging.warn("using pure python plink parser (might be much slower!!)")
SNPs = SP.zeros(((int(SP.ceil(0.25*iid_count_in))*4),snp_count_out),order=order, dtype=dtype) #allocate it a little big
for SNPsIndex, bimIndex in enumerate(snpset_withbbed):
startbit = int(SP.ceil(0.25*iid_count_in)*bimIndex+3)
bed._filepointer.seek(startbit)
nbyte = int(SP.ceil(0.25*iid_count_in))
bytes = SP.array(bytearray(bed._filepointer.read(nbyte))).reshape((int(SP.ceil(0.25*iid_count_in)),1),order='F')
SNPs[3::4,SNPsIndex:SNPsIndex+1][bytes>=64]=SP.nan
SNPs[3::4,SNPsIndex:SNPsIndex+1][bytes>=128]=1
SNPs[3::4,SNPsIndex:SNPsIndex+1][bytes>=192]=2
bytes=SP.mod(bytes,64)
SNPs[2::4,SNPsIndex:SNPsIndex+1][bytes>=16]=SP.nan
SNPs[2::4,SNPsIndex:SNPsIndex+1][bytes>=32]=1
SNPs[2::4,SNPsIndex:SNPsIndex+1][bytes>=48]=2
bytes=SP.mod(bytes,16)
SNPs[1::4,SNPsIndex:SNPsIndex+1][bytes>=4]=SP.nan
SNPs[1::4,SNPsIndex:SNPsIndex+1][bytes>=8]=1
SNPs[1::4,SNPsIndex:SNPsIndex+1][bytes>=12]=2
bytes=SP.mod(bytes,4)
SNPs[0::4,SNPsIndex:SNPsIndex+1][bytes>=1]=SP.nan
SNPs[0::4,SNPsIndex:SNPsIndex+1][bytes>=2]=1
SNPs[0::4,SNPsIndex:SNPsIndex+1][bytes>=3]=2
SNPs = SNPs[iid_index_out,:] #reorder or trim any extra allocation
ret = {
'rs' :bed.rs[snp_index_out],
'pos' :bed.pos[snp_index_out,:],
'snps' :SNPs,
'iid' :bed.original_iids[iid_index_out,:]
}
return ret
def _read(self, iid_index_or_none, sid_index_or_none, order, dtype, force_python_only, view_ok):
self._run_once()
if order=='A':
order='F'
assert not hasattr(self, 'ind_used'), "A SnpReader should not have a 'ind_used' attribute"
iid_count_in = self.iid_count
sid_count_in = self.sid_count
if iid_index_or_none is not None:
iid_count_out = len(iid_index_or_none)
iid_index_out = iid_index_or_none
else:
iid_count_out = iid_count_in
iid_index_out = range(iid_count_in)
if sid_index_or_none is not None:
sid_count_out = len(sid_index_or_none)
sid_index_out = sid_index_or_none
else:
sid_count_out = sid_count_in
sid_index_out = range(sid_count_in)
if not force_python_only:
from pysnptools.snpreader import wrap_plink_parser
val = np.zeros((iid_count_out, sid_count_out), order=order, dtype=dtype)
bed_fn = SnpReader._name_of_other_file(self.filename,"bed","bed")
if iid_count_in > 0 and sid_count_in > 0:
if dtype == np.float64:
if order=="F":
wrap_plink_parser.readPlinkBedFile2doubleFAAA(bed_fn.encode('ascii'), iid_count_in, sid_count_in, self.count_A1, iid_index_out, sid_index_out, val)
elif order=="C":
wrap_plink_parser.readPlinkBedFile2doubleCAAA(bed_fn.encode('ascii'), iid_count_in, sid_count_in, self.count_A1, iid_index_out, sid_index_out, val)
else:
raise Exception("order '{0}' not known, only 'F' and 'C'".format(order));
elif dtype == np.float32:
if order=="F":
wrap_plink_parser.readPlinkBedFile2floatFAAA(bed_fn.encode('ascii'), iid_count_in, sid_count_in, self.count_A1, iid_index_out, sid_index_out, val)
elif order=="C":
wrap_plink_parser.readPlinkBedFile2floatCAAA(bed_fn.encode('ascii'), iid_count_in, sid_count_in, self.count_A1, iid_index_out, sid_index_out, val)
else:
raise Exception("order '{0}' not known, only 'F' and 'C'".format(order));
else:
raise Exception("dtype '{0}' not known, only float64 and float32".format(dtype))
else:
if not self.count_A1:
byteZero = 0
byteThree = 2
else:
byteZero = 2
byteThree = 0
# An earlier version of this code had a way to read consecutive SNPs of code in one read. May want
# to add that ability back to the code.
# Also, note that reading with python will often result in non-contiguous memory, so the python standardizers will automatically be used, too.
self._open_bed()
logging.warn("using pure python plink parser (might be much slower!!)")
val = np.zeros(((int(np.ceil(0.25*iid_count_in))*4),sid_count_out),order=order, dtype=dtype) #allocate it a little big
for SNPsIndex, bimIndex in enumerate(sid_index_out):
startbit = int(np.ceil(0.25*iid_count_in)*bimIndex+3)
self._filepointer.seek(startbit)
nbyte = int(np.ceil(0.25*iid_count_in))
bytes = np.array(bytearray(self._filepointer.read(nbyte))).reshape((int(np.ceil(0.25*iid_count_in)),1),order='F')
val[3::4,SNPsIndex:SNPsIndex+1]=byteZero
val[3::4,SNPsIndex:SNPsIndex+1][bytes>=64]=np.nan
val[3::4,SNPsIndex:SNPsIndex+1][bytes>=128]=1
val[3::4,SNPsIndex:SNPsIndex+1][bytes>=192]=byteThree
bytes=np.mod(bytes,64)
val[2::4,SNPsIndex:SNPsIndex+1]=byteZero
val[2::4,SNPsIndex:SNPsIndex+1][bytes>=16]=np.nan
val[2::4,SNPsIndex:SNPsIndex+1][bytes>=32]=1
val[2::4,SNPsIndex:SNPsIndex+1][bytes>=48]=byteThree
bytes=np.mod(bytes,16)
val[1::4,SNPsIndex:SNPsIndex+1]=byteZero
val[1::4,SNPsIndex:SNPsIndex+1][bytes>=4]=np.nan
val[1::4,SNPsIndex:SNPsIndex+1][bytes>=8]=1
val[1::4,SNPsIndex:SNPsIndex+1][bytes>=12]=byteThree
bytes=np.mod(bytes,4)
val[0::4,SNPsIndex:SNPsIndex+1]=byteZero
val[0::4,SNPsIndex:SNPsIndex+1][bytes>=1]=np.nan
val[0::4,SNPsIndex:SNPsIndex+1][bytes>=2]=1
val[0::4,SNPsIndex:SNPsIndex+1][bytes>=3]=byteThree
val = val[iid_index_out,:] #reorder or trim any extra allocation
#!!LATER this can fail because the trim statement above messes up the order
#assert(SnpReader._array_properties_are_ok(val, order, dtype)) #!!
self._close_bed()
return val
