def hipgaleq():
"""Print summary of GAL-EQ comparison with SLALIB galeq (HIP)."""
hip_tab = get_hipdata()
sla_tab = get_sla("slalib_hip_galeq.txt")
dummy = np.zeros((len(hip_tab['px']), ))
v6l = convert.cat2v6(hip_tab['glon'], hip_tab['glat'], dummy, dummy, dummy,
dummy, tpm.CJ)
# The actual epoch of galactic data is J2000. But in SLALIB
# the input is taken to be B1950.0. So use tpm.B1950 as epoch
# in the conversion.
v6o = convert.convertv6(v6l, s1=4, s2=6, epoch=tpm.B1950)
cat = convert.v62cat(v6o, tpm.CJ)
cat = cat2array(cat)
ra_diff = np.degrees(cat['alpha']) - sla_tab[:, 0]
ra_diff = np.abs(ra_diff * 3600.0)
dec_diff = np.degrees(cat['delta']) - sla_tab[:, 1]
dec_diff = np.abs(dec_diff * 3600.0)
print("Comparison with SLALIB galeq using HIPPARCOS data.")
fs = "{0} {1}\n" + \
"Min: {2:.4f} Max: {3:.4f} \nMean: {4:.4f} Std: {5:.4f}\n"
x = stats.describe(ra_diff)
print(fs.format("ra_diff", "arcsec", x[1][0], x[1][1], x[2], x[3]**0.5))
x = stats.describe(dec_diff)
print(fs.format("dec_diff", "arcsec", x[1][0], x[1][1], x[2], x[3]**0.5))
def hipecleq():
"""Print summary of ECL-EQ comparison with SLALIB ecleq (HIP)."""
hip_tab = get_hipdata()
sla_tab = get_sla("slalib_hip_ecleq.txt")
dummy = np.zeros((len(hip_tab['px']), ))
v6l = convert.cat2v6(hip_tab['elon2'], hip_tab['elat2'], dummy, dummy,
dummy, dummy, tpm.CJ)
v6o = convert.convertv6(v6l, s1=3, s2=6)
cat = convert.v62cat(v6o, tpm.CJ)
cat = cat2array(cat)
ra_diff = np.degrees(cat['alpha']) - sla_tab[:, 0]
ra_diff = np.abs(ra_diff * 3600.0)
dec_diff = np.degrees(cat['delta']) - sla_tab[:, 1]
dec_diff = np.abs(dec_diff * 3600.0)
print("Comparison with SLALIB ecleq using HIPPARCOS data.")
fs = "{0} {1}\n" + \
"Min: {2:.4f} Max: {3:.4f} \nMean: {4:.4f} Std: {5:.4f}\n"
x = stats.describe(ra_diff)
print(fs.format("ra_diff", "arcsec", x[1][0], x[1][1], x[2], x[3]**0.5))
x = stats.describe(dec_diff)
print(fs.format("dec_diff", "arcsec", x[1][0], x[1][1], x[2], x[3]**0.5))
def hipeqgal():
"""Print summary of EQ-GAL comparison with SLALIB eqgal (HIP)."""
hip_tab = get_hipdata()
sla_tab = get_sla("slalib_hip_eqgal.txt")
dummy = np.zeros((len(hip_tab['px']), ))
v6l = convert.cat2v6(hip_tab['raj2'], hip_tab['decj2'], dummy, dummy,
dummy, dummy, tpm.CJ)
v6o = convert.convertv6(v6l, s1=6, s2=4)
# The galactic coordinates are at epoch J2000. But SLALIB
# results are for B1950. So apply proper motion here.
v6o = convert.proper_motion(v6o, tpm.B1950, tpm.J2000)
cat = convert.v62cat(v6o, tpm.CJ)
cat = cat2array(cat)
ra_diff = np.degrees(cat['alpha']) - sla_tab[:, 0]
ra_diff = np.abs(ra_diff * 3600.0)
dec_diff = np.degrees(cat['delta']) - sla_tab[:, 1]
dec_diff = np.abs(dec_diff * 3600.0)
print("Comparison with SLALIB eqgal using HIPPARCOS data.")
fs = "{0} {1}\n" + \
"Min: {2:.4f} Max: {3:.4f} \nMean: {4:.4f} Std: {5:.4f}\n"
x = stats.describe(ra_diff)
print(fs.format("ra_diff", "arcsec", x[1][0], x[1][1], x[2], x[3]**0.5))
x = stats.describe(dec_diff)
print(fs.format("dec_diff", "arcsec", x[1][0], x[1][1], x[2], x[3]**0.5))
def hipfk524():
"""Print summary of FK5-FK4 comparison with SLALIB fk524 (HIP)."""
hip_tab = get_hipdata()
sla_tab = get_sla("slalib_hip_fk524.txt")
rv = np.zeros((len(hip_tab['px'],)))
v6l = convert.cat2v6(hip_tab['raj2'], hip_tab['decj2'], hip_tab['pma'],
hip_tab['pmd'], hip_tab['px'], rv, tpm.CJ)
v6o = convert.convertv6(v6l, s1=6, s2=5, epoch=tpm.J2000)
v6o = convert.proper_motion(v6o, tpm.B1950, tpm.J2000)
cat = (tpm.v62cat(v, tpm.CB) for v in v6o)
d = cat2array(cat)
ra_diff = np.degrees(d['alpha']) - sla_tab[:, 0]
ra_diff *= 3600.0
dec_diff = np.degrees(d['delta']) - sla_tab[:, 1]
dec_diff *= 3600.0
px_diff = d['px'] * 1000.0 - sla_tab[:, 2]
pma_diff = d['pma'] * 1000.0 / 100.0 - sla_tab[:, 3]
pmd_diff = d['pmd'] * 1000.0 / 100.0 - sla_tab[:, 4]
rv_diff = d['rv'] - sla_tab[:, 5]
fs = "{0} {1}\n" + \
"Min: {2:.4f} Max: {3:.4f} \nMean: {4:.4f} Std: {5:.4f}\n"
x = [stats.describe(np.abs(i)) for i in
[ra_diff, dec_diff, px_diff, pma_diff, pmd_diff, rv_diff]]
print("Comparison with SLALIB fk524 using HIPPARCOS data.")
for name, unit, s in zip(
["ra_diff", "dec_diff", "px_diff", "pma_diff", "pmd_diff",
"rv_diff"],
["arsec", "arcsec", "milliarcsec", "milli-arsec/trop. yr",
"milli-arcsec/trop. yr", "km/s"],
x):
print(fs.format(name, unit, s[1][0], s[1][1], s[2], s[3] ** 0.5))
def hipgaleq():
"""Print summary of GAL-EQ comparison with SLALIB galeq (HIP)."""
hip_tab = get_hipdata()
sla_tab = get_sla("slalib_hip_galeq.txt")
dummy = np.zeros((len(hip_tab['px']),))
v6l = convert.cat2v6(hip_tab['glon'], hip_tab['glat'], dummy, dummy,
dummy, dummy, tpm.CJ)
# The actual epoch of galactic data is J2000. But in SLALIB
# the input is taken to be B1950.0. So use tpm.B1950 as epoch
# in the conversion.
v6o = convert.convertv6(v6l, s1=4, s2=6, epoch=tpm.B1950)
cat = convert.v62cat(v6o, tpm.CJ)
cat = cat2array(cat)
ra_diff = np.degrees(cat['alpha']) - sla_tab[:, 0]
ra_diff = np.abs(ra_diff * 3600.0)
dec_diff = np.degrees(cat['delta']) - sla_tab[:, 1]
dec_diff = np.abs(dec_diff * 3600.0)
print("Comparison with SLALIB galeq using HIPPARCOS data.")
fs = "{0} {1}\n" + \
"Min: {2:.4f} Max: {3:.4f} \nMean: {4:.4f} Std: {5:.4f}\n"
x = stats.describe(ra_diff)
print(fs.format("ra_diff", "arcsec", x[1][0], x[1][1], x[2],
x[3] ** 0.5))
x = stats.describe(dec_diff)
print(fs.format("dec_diff", "arcsec", x[1][0], x[1][1], x[2],
x[3] ** 0.5))
def hipeqgal():
"""Print summary of EQ-GAL comparison with SLALIB eqgal (HIP)."""
hip_tab = get_hipdata()
sla_tab = get_sla("slalib_hip_eqgal.txt")
dummy = np.zeros((len(hip_tab['px']),))
v6l = convert.cat2v6(hip_tab['raj2'], hip_tab['decj2'], dummy, dummy,
dummy, dummy, tpm.CJ)
v6o = convert.convertv6(v6l, s1=6, s2=4)
# The galactic coordinates are at epoch J2000. But SLALIB
# results are for B1950. So apply proper motion here.
v6o = convert.proper_motion(v6o, tpm.B1950, tpm.J2000)
cat = convert.v62cat(v6o, tpm.CJ)
cat = cat2array(cat)
ra_diff = np.degrees(cat['alpha']) - sla_tab[:, 0]
ra_diff = np.abs(ra_diff * 3600.0)
dec_diff = np.degrees(cat['delta']) - sla_tab[:, 1]
dec_diff = np.abs(dec_diff * 3600.0)
print("Comparison with SLALIB eqgal using HIPPARCOS data.")
fs = "{0} {1}\n" + \
"Min: {2:.4f} Max: {3:.4f} \nMean: {4:.4f} Std: {5:.4f}\n"
x = stats.describe(ra_diff)
print(fs.format("ra_diff", "arcsec", x[1][0], x[1][1], x[2],
x[3] ** 0.5))
x = stats.describe(dec_diff)
print(fs.format("dec_diff", "arcsec", x[1][0], x[1][1], x[2],
x[3] ** 0.5))
def hipecleq():
"""Print summary of ECL-EQ comparison with SLALIB ecleq (HIP)."""
hip_tab = get_hipdata()
sla_tab = get_sla("slalib_hip_ecleq.txt")
dummy = np.zeros((len(hip_tab['px']),))
v6l = convert.cat2v6(hip_tab['elon2'], hip_tab['elat2'], dummy, dummy,
dummy, dummy, tpm.CJ)
v6o = convert.convertv6(v6l, s1=3, s2=6)
cat = convert.v62cat(v6o, tpm.CJ)
cat = cat2array(cat)
ra_diff = np.degrees(cat['alpha']) - sla_tab[:, 0]
ra_diff = np.abs(ra_diff * 3600.0)
dec_diff = np.degrees(cat['delta']) - sla_tab[:, 1]
dec_diff = np.abs(dec_diff * 3600.0)
print("Comparison with SLALIB ecleq using HIPPARCOS data.")
fs = "{0} {1}\n" + \
"Min: {2:.4f} Max: {3:.4f} \nMean: {4:.4f} Std: {5:.4f}\n"
x = stats.describe(ra_diff)
print(fs.format("ra_diff", "arcsec", x[1][0], x[1][1], x[2],
x[3] ** 0.5))
x = stats.describe(dec_diff)
print(fs.format("dec_diff", "arcsec", x[1][0], x[1][1], x[2],
x[3] ** 0.5))
def hipfk425():
"""Print summary of FK4-FK5 comparison with SLALIB fk425 (HIP).
The input FK4 data is the same generated for the the FK5-FK4
conversion test. I read that data into slalib and perform the
reverse conversion. The result is then compared with that from
PyTPM.
"""
sla_tabb = get_sla("slalib_hip_fk524.txt")
sla_tab = get_sla("slalib_hip_fk524_fk425.txt")
r = np.radians(sla_tabb[:, 0])
d = np.radians(sla_tabb[:, 1])
px = sla_tabb[:, 2] / 1000.0
pma = sla_tabb[:, 3] / 1000.0 * 100.0
pmd = sla_tabb[:, 4] / 1000.0 * 100.0
rv = sla_tabb[:, 5]
v6l = convert.cat2v6(r, d, pma, pmd, px, rv, tpm.CB)
v6o = convert.convertv6(v6l, s1=5, s2=6, epoch=tpm.B1950)
v6o = convert.proper_motion(v6o, tpm.J2000, tpm.B1950)
cat = convert.v62cat(v6o, tpm.CJ)
cat = cat2array(cat)
r = np.degrees(cat['alpha'])
d = np.degrees(cat['delta'])
# arc-sec/cent. to milli-arcsec/Jul. year.
pma = cat['pma'] * 1000.0 / 100.0
pmd = cat['pmd'] * 1000.0 / 100.0
# arc-sec to milli-arcsec
px = cat['px'] * 1000.0
ra_diff = np.abs(r - sla_tab[:, 0]) * 3600.0
dec_diff = np.abs(d - sla_tab[:, 1]) * 3600.0
px_diff = np.abs(px - sla_tab[:, 2])
pma_diff = np.abs(pma - sla_tab[:, 3])
pmd_diff = np.abs(pmd - sla_tab[:, 4])
rv_diff = np.abs(rv - sla_tab[:, 5])
fs = "{0} {1}\n" + \
"Min: {2:.4f} Max: {3:.4f} \nMean: {4:.4f} Std: {5:.4f}\n"
x = [
stats.describe(np.abs(i))
for i in [ra_diff, dec_diff, px_diff, pma_diff, pmd_diff, rv_diff]
]
print("Comparison with SLALIB fk425 using HIPPARCOS data.")
for name, unit, s in zip(
["ra_diff", "dec_diff", "px_diff", "pma_diff", "pmd_diff", "rv_diff"],
[
"arsec", "arcsec", "milliarcsec", "milli-arsec/trop. yr",
"milli-arcsec/trop. yr", "km/s"
], x):
print(fs.format(name, unit, s[1][0], s[1][1], s[2], s[3]**0.5))
def hipfk425():
"""Print summary of FK4-FK5 comparison with SLALIB fk425 (HIP).
The input FK4 data is the same generated for the the FK5-FK4
conversion test. I read that data into slalib and perform the
reverse conversion. The result is then compared with that from
PyTPM.
"""
sla_tabb = get_sla("slalib_hip_fk524.txt")
sla_tab = get_sla("slalib_hip_fk524_fk425.txt")
r = np.radians(sla_tabb[:, 0])
d = np.radians(sla_tabb[:, 1])
px = sla_tabb[:, 2] / 1000.0
pma = sla_tabb[:, 3] / 1000.0 * 100.0
pmd = sla_tabb[:, 4] / 1000.0 * 100.0
rv = sla_tabb[:, 5]
v6l = convert.cat2v6(r, d, pma, pmd, px, rv, tpm.CB)
v6o = convert.convertv6(v6l, s1=5, s2=6, epoch=tpm.B1950)
v6o = convert.proper_motion(v6o, tpm.J2000, tpm.B1950)
cat = convert.v62cat(v6o, tpm.CJ)
cat = cat2array(cat)
r = np.degrees(cat['alpha'])
d = np.degrees(cat['delta'])
# arc-sec/cent. to milli-arcsec/Jul. year.
pma = cat['pma'] * 1000.0 / 100.0
pmd = cat['pmd'] * 1000.0 / 100.0
# arc-sec to milli-arcsec
px = cat['px'] * 1000.0
ra_diff = np.abs(r - sla_tab[:, 0]) * 3600.0
dec_diff = np.abs(d - sla_tab[:, 1]) * 3600.0
px_diff = np.abs(px - sla_tab[:, 2])
pma_diff = np.abs(pma - sla_tab[:, 3])
pmd_diff = np.abs(pmd - sla_tab[:, 4])
rv_diff = np.abs(rv - sla_tab[:, 5])
fs = "{0} {1}\n" + \
"Min: {2:.4f} Max: {3:.4f} \nMean: {4:.4f} Std: {5:.4f}\n"
x = [stats.describe(np.abs(i)) for i in
[ra_diff, dec_diff, px_diff, pma_diff, pmd_diff, rv_diff]]
print("Comparison with SLALIB fk425 using HIPPARCOS data.")
for name, unit, s in zip(
["ra_diff", "dec_diff", "px_diff", "pma_diff", "pmd_diff",
"rv_diff"],
["arsec", "arcsec", "milliarcsec", "milli-arsec/trop. yr",
"milli-arcsec/trop. yr", "km/s"],
x):
print(fs.format(name, unit, s[1][0], s[1][1], s[2], s[3] ** 0.5))
def fB1950toJ2000_main(ra_J2000, dec_J2000):
'''
Precess Right Ascension and Declination coordinates from the sexagismal positions in the B1959 system to decimal degrees in the J2000 system.
Input
ra_J2000: single Right Ascension position in sexagismal J2000
dec_J2000: single Declination position in sexagismal J2000
Output
ra_deg: single Right Ascension position in decimal degree
dec_deg: single Declination position in decimal degrees
'''
# convert decimal degrees to sexagismal format
ra_sexa, dec_sexa = degtosexa(ra_J2000, dec_J2000)
# extract RA hh:mm:ss and Dec dd:mm:ss components
ra_hh = float(ra_sexa.split(" ")[0])
ra_mm = float(ra_sexa.split(" ")[1])
ra_ss = float(ra_sexa.split(" ")[2])
dec_dd = float(dec_sexa.split(" ")[0][1:])
dec_mm = float(dec_sexa.split(" ")[1])
dec_ss = float(dec_sexa.split(" ")[2])
# create RA and Dec objects
ra_J2000 = tpm.HMS(hh=ra_hh, mm=ra_mm, ss=ra_ss).to_radians()
dec_J2000 = tpm.DMS(dd=dec_dd, mm=dec_mm, ss=dec_ss).to_radians()
# velocity vector
v5 = convert.cat2v6(ra_J2000, dec_J2000)
v5_fk6 = convert.convertv6(v5,
s1=5,
s2=6,
epoch=tpm.B1950,
equinox=tpm.B1950)
v5_fk6_ep2000 = convert.proper_motion(v5_fk6, tpm.J2000, tpm.B1950)
d = convert.v62cat(v5_fk6_ep2000, C=tpm.CJ)
ra_new_rad = d["alpha"]
ra_deg = ra_new_rad * 180. / np.pi
dec_new_rad = d["delta"]
dec_deg = dec_new_rad * 180. / np.pi
return ra_deg, dec_deg
def hipfk524():
"""Print summary of FK5-FK4 comparison with SLALIB fk524 (HIP)."""
hip_tab = get_hipdata()
sla_tab = get_sla("slalib_hip_fk524.txt")
rv = np.zeros((len(hip_tab['px'], )))
v6l = convert.cat2v6(hip_tab['raj2'], hip_tab['decj2'], hip_tab['pma'],
hip_tab['pmd'], hip_tab['px'], rv, tpm.CJ)
v6o = convert.convertv6(v6l, s1=6, s2=5, epoch=tpm.J2000)
v6o = convert.proper_motion(v6o, tpm.B1950, tpm.J2000)
cat = (tpm.v62cat(v, tpm.CB) for v in v6o)
d = cat2array(cat)
ra_diff = np.degrees(d['alpha']) - sla_tab[:, 0]
ra_diff *= 3600.0
dec_diff = np.degrees(d['delta']) - sla_tab[:, 1]
dec_diff *= 3600.0
px_diff = d['px'] * 1000.0 - sla_tab[:, 2]
pma_diff = d['pma'] * 1000.0 / 100.0 - sla_tab[:, 3]
pmd_diff = d['pmd'] * 1000.0 / 100.0 - sla_tab[:, 4]
rv_diff = d['rv'] - sla_tab[:, 5]
fs = "{0} {1}\n" + \
"Min: {2:.4f} Max: {3:.4f} \nMean: {4:.4f} Std: {5:.4f}\n"
x = [
stats.describe(np.abs(i))
for i in [ra_diff, dec_diff, px_diff, pma_diff, pmd_diff, rv_diff]
]
print("Comparison with SLALIB fk524 using HIPPARCOS data.")
for name, unit, s in zip(
["ra_diff", "dec_diff", "px_diff", "pma_diff", "pmd_diff", "rv_diff"],
[
"arsec", "arcsec", "milliarcsec", "milli-arsec/trop. yr",
"milli-arcsec/trop. yr", "km/s"
], x):
print(fs.format(name, unit, s[1][0], s[1][1], s[2], s[3]**0.5))
# And take out cos in RA proper motion.
d["pma"].append(i[3] / math.cos(d["decj2"][-1]) / 1000.0 * 100.0)
d["pmd"].append(i[4] / 1000.0 * 100.0)
# milli-arsec to arc-sec
d["px"].append(i[2] / 1000.0)
f.close()
return d
hip_tab = get_hipdata()
# Dummy radial velocities.
rv = [0.0 for i in range(len(hip_tab['px']))]
# Create V6C vectors.
v6 = convert.cat2v6(hip_tab['raj2'], hip_tab['decj2'], hip_tab['pma'],
hip_tab['pmd'], hip_tab['px'], rv, tpm.CJ)
# FK5-FK4 conversion
def fk54():
# Convert from FK5 equinox and epoch J2000.0 to FK4 equinox B1950, but
# at the given epoch i.e., J2000.0.
v6o = convert.convertv6(v6, s1=6, s2=5, epoch=tpm.J2000)
# Apply proper motion from J2000.0 to B1950.0. Objects with zero
# velocity in FK5 will have a fictitious proper motion in FK4.
v6o = convert.proper_motion(v6o, tpm.B1950, tpm.J2000)
# Convert V6C vectors into a list of dictionaries, each of which
# contain the 6-D Fk4 B1950.0 coordinates.
cat = convert.v62cat(v6o, tpm.CB)
import numpy as np
from pytpm import convert, tpm
az = 3.30084818 #rad
el = 0.94610742 #rad
lat = 34.64 #deg
lon = -103.7 #deg
alt = 35800.26 #m
ut = 2455822.20000367 #julian date
for i in range(0, 1):
v6 = convert.cat2v6(alpha=az,
delta=el,
pma=0.0,
pmd=0.0,
px=0.0,
rv=0,
C=tpm.CJ)
start_clock = time.clock()
v6c = convert.convertv6(v6=v6,
utc=ut,
s1=tpm.TPM_S19,
s2=tpm.TPM_S07,
epoch=tpm.J2000,
equinox=tpm.J2000,
lon=lon,
lat=lat,
alt=alt,
xpole=0.0,
ypole=0.0,
import datetime
import time
import numpy as np
from pytpm import convert, tpm
az = 3.30084818 #rad
el = 0.94610742 #rad
lat = 34.64 #deg
lon = -103.7 #deg
alt = 35800.26 #m
ut = 2455822.20000367 #julian date
for i in range(0, 1):
v6 = convert.cat2v6(alpha = az, delta = el, pma=0.0, pmd=0.0, px=0.0, rv=0, C=tpm.CJ)
start_clock = time.clock()
v6c = convert.convertv6(v6=v6,
utc=ut,
s1=tpm.TPM_S19, s2=tpm.TPM_S07,
epoch=tpm.J2000, equinox=tpm.J2000,
lon=lon, lat=lat, alt=alt,
xpole=0.0, ypole=0.0,
T=273.15, P=1013.25, H=0.0, wavelength=19986.16386)
print("TIME[%d]:%.2g s" % (i, time.clock() - start_clock))
cat = convert.v62cat(v6c)
print(np.degrees([cat['alpha'], cat['delta']]))
