async def get_W2(self, ctx):
"""Set Wiz Blue."""
try:
await ctx.send('Sending Wiz Command....')
# turn on the light into "rhythm mode"
await light.turn_on(PilotBuilder())
# set bulb brightness
await light.turn_on(PilotBuilder(brightness=255))
await light.turn_on(PilotBuilder(rgb=(0, 0, 255)))
await ctx.send('Wiz Command Finished....')
except (RuntimeError, AttributeError):
await ctx.send('Wiz Command Failed.')
def set_colortemp(self, colortemp=None):
if colortemp is None:
state = self.get_state()
colortemp = state.get_colortemp()
colortemp = max(min(int(colortemp), 6500), 2200)
self.loop.run_until_complete(
self.light.turn_on(PilotBuilder(colortemp=colortemp)))
async def main():
"""Sample code to work with bulbs."""
# Discover all bulbs in the network via broadcast datagram (UDP)
# function takes the discovery object and returns a list with wizlight objects.
# bulbs = await discovery.find_wizlights(discovery)
# Print the IP address of the bulb on index 0
# print(f"Bulb IP address: {bulbs[0].ip}")
# Iterate over all returned bulbs
# for bulb in bulbs:
# print(bulb.__dict__)
# Turn off all available bulbs
# await bulb.turn_off()
# Set up a standard light
#light = wizlight("192.168.0.170")
light = wizlight("192.168.86.36")
# Set up the light with a custom port
#light = wizlight("your bulb's IP address", 12345)
# The following calls need to be done inside an asyncio coroutine
# to run them fron normal synchronous code, you can wrap them with
# asyncio.run(..).
# Turn on the light into "rhythm mode"
# await light.turn_on(PilotBuilder())
# Set bulb brightness
# await light.turn_on(PilotBuilder(brightness = 255))
# Set bulb brightness (with async timeout)
timeout = 10
await asyncio.wait_for(light.turn_on(PilotBuilder(brightness=255)),
timeout)
# Set bulb to warm white
# await light.turn_on(PilotBuilder(warm_white = 255))
# Set RGB values
# red to 0 = 0%, green to 128 = 50%, blue to 255 = 100%
# await light.turn_on(PilotBuilder(rgb = (0, 128, 255)))
# Set bulb to red
# await light.turn_on(PilotBuilder(warm_white = 255))
# Set RGB values
# red to 0 = 0%, green to 128 = 50%, blue to 255 = 100%
await light.turn_on(PilotBuilder(rgb=(255, 0, 0)))
def set_brightness(self, brightness=None):
if brightness is None:
state = self.get_state()
brightness = state.get_brightness()
brightness = int(brightness)
brightness = max(brightness, 0) # lower bound
brightness = min(brightness, 255) # upper bound
self.loop.run_until_complete(
self.light.turn_on(PilotBuilder(brightness=brightness)))
async def lights_normal():
loop = asyncio.get_event_loop()
pb = PilotBuilder()
await asyncio.gather(
lights[0].turn_on(pb),
lights[1].turn_on(pb),
lights[2].turn_on(pb),
loop = loop
)
async def lights_red():
# create/get the current thread's asyncio loop
loop = asyncio.get_event_loop()
rgb = [1, 0, 0]
pb = PilotBuilder(rgb = rgb)
await asyncio.gather(
lights[0].turn_on(pb),
lights[1].turn_on(pb),
lights[2].turn_on(pb),
loop = loop
)
async def send_to_device(self, colors: Colors) -> None:
if len(colors) != len(config.LED_IPS): return
try:
ops = [
wizlight(config.LED_IPS[i]).turn_on(PilotBuilder(rgb=colors[i]))
for i in range(len(config.LED_IPS))
]
loop = asyncio.get_event_loop()
await asyncio.gather(*ops, loop=loop)
except Exception:
logging.exception("Something went wrong with LightController")
await asyncio.sleep(config.CONTROLLER_ERROR_DELAY)
async def async_turn_on(self, **kwargs):
"""
Instruct the light to turn on.
"""
# TODO: change this to set state using a single UDP call
#
rgb = None
if ATTR_RGB_COLOR in kwargs:
rgb = kwargs[ATTR_RGB_COLOR]
if ATTR_HS_COLOR in kwargs:
rgb = color_utils.color_hs_to_RGB(kwargs[ATTR_HS_COLOR][0],
kwargs[ATTR_HS_COLOR][1])
brightness = None
if ATTR_BRIGHTNESS in kwargs:
brightness = kwargs[ATTR_BRIGHTNESS]
colortemp = None
if ATTR_COLOR_TEMP in kwargs:
kelvin = color_utils.color_temperature_mired_to_kelvin(
kwargs[ATTR_COLOR_TEMP])
colortemp = kelvin
sceneid = None
if ATTR_EFFECT in kwargs:
sceneid = self._light.get_id_from_scene_name(kwargs[ATTR_EFFECT])
if sceneid == 1000: #rhythm
pilot = PilotBuilder()
else:
pilot = PilotBuilder(rgb=rgb,
brightness=brightness,
colortemp=colortemp,
scene=sceneid)
await self._light.turn_on(pilot)
async def light_random(light):
# uniform random ints
# pb = PilotBuilder(rgb = tuple(map(lambda i: int(i), rng.integers(0, 256, size=3))))
# Dirichlet distribution
#rgbs = np.round(255*np.random.dirichlet([1, 1, 1], 2))
# HSV with maximum saturation and value
state = await lights[light].updateState()
oldrgb = tuple(map(lambda i: i/255, state.get_rgb()))
oldhue = int(255 * colorsys.rgb_to_hsv(oldrgb[0], oldrgb[1], oldrgb[2])[0])
while True:
hue = rng.uniform(0, 360, 1)
print(oldhue)
print(hue)
if abs(hue - oldhue) > 100 or (360 - oldhue + hue > 100) or (360 - hue + oldhue > 100):
break
rgb = colorsys.hsv_to_rgb(hue, 1.0, 1.0)
await lights[light].turn_on(PilotBuilder(rgb = tuple(map(lambda i: int(255*i), rgb))))
async def turn_bulb_on_scene_brightness(self, scene_id, brightness_val):
await self.light.turn_on(PilotBuilder(scene = scene_id, brightness = brightness_val))
async def turn_bulb_on_brightness(self, brightness_val):
await self.light.turn_on(PilotBuilder(brightness = brightness_val))
async def turn_bulb_on_scene_id(self, scene_id):
await self.light.turn_on(PilotBuilder(scene = scene_id))
async def turn_bulb_on(self):
await self.light.turn_on(PilotBuilder())
async def turnOnLights(light, light2, brightness_input):
#brightness
await light.turn_on(PilotBuilder(brightness = brightness_input))
await light2.turn_on(PilotBuilder(brightness = brightness_input))
def set_color(self, rgb=(0, 0, 0)):
rgb = tuple([max(min(int(c), 255), 0) for c in rgb])
self.loop.run_until_complete(self.light.turn_on(PilotBuilder(rgb=rgb)))
def trapezoid (hueVec, saturation, brightness):
# if saturation is essentially 0, just go to the full on
if (saturation <= epsilon):
rgb = (0, 0, 0)
else:
# we want to compute the actual RGB color of the saturated point as a linear
# combination of no more than two of the basis vectors. first we have to figure
# out which of the basis vectors we will use
maxAngle = math.cos ((math.pi * 2 / 3) - epsilon)
mask = tuple([(1 if (vecDot (hueVec, vector) > maxAngle) else 0) for vector in basis])
count = sum(mask)
debug (" Max Angle: {:0.3f}, Mask: ({}, {}, {}), Count: {}".format (maxAngle, mask[0], mask[1], mask[2], count))
if (count == 1):
# easy case, it's just one color component
rgb = mask
else:
# recast as a ray-line intersection using the two found basis vectors, note
# the basis vectors are normalized by definition
subBasis = [basis[i] for i, maskVal in enumerate(mask) if (maskVal == 1)]
printBasis (subBasis, " ")
# define the line from the origin along the second vector, computing its
# equation in the form Ax + C = 0, but C is always 0 for this line
AB = (subBasis[1][1], subBasis[1][0] * -1)
# intersect the ray from the saturation point along the first basis vector
# with the line we just computed, these are definitely not co-linear, so there
# should always be an intersection point, and the result should always be in
# the range [-1 .. 1], this is the first basis coefficient
coeff = [0, 0]
coeff[0] = vecDot (hueVec, AB) / vecDot (subBasis[0], AB)
# compute the intersection point, and the second basis coefficient, note that
# we compute the coefficients to always be positive, but the intersection calculation
# needs to be in the opposite direction from the basis vector (hence the negative on
# coeff[0]).
intersection = vecAdd (vecMul (subBasis[0], -coeff[0]), hueVec)
coeff[1] = vecDot (intersection, subBasis[1])
debug (" Intersection Point: {}, Coefficients: {}".format (vecFormat (intersection), vecFormat (coeff)))
# there's a bit of a gamut problem here, as the area outside the hexagon defined by
# the three unit basis vectors is not actually reachable. this manifests as
# coefficients greater than 1, which will always happen unless the target color is
# either one of the basis vectors or a bisector of two basis vectors. we scale both
# coefficients by 1/maxCoefficient to make valid colors
maxCoeff = max (coeff[0], coeff[1])
coeff = [c / maxCoeff for c in coeff]
debug (" Scaled Coefficients: {}".format (vecFormat (coeff)))
# now rebuild the rgb vector by putting the coefficients into the correct place
j = 0
rgbList = []
for i in range (3):
if (mask[i] == 1):
rgbList.append (min (coeff[j], 1))
j += 1
else:
rgbList.append (0)
rgb = tuple (rgbList)
# we want a discontinuous behavior. if saturation >= 0.5, we want the color to remain saturated
# and we scale the cw value down to 0 as saturation goes from 0.5 to 1. if saturation < 0.5, we
# want to saturate cw, and scale the rgb down to (0, 0, 0) as saturation goes from 0.5 - 0
if (saturation >= 0.5):
# rgb remains saturated
# scale the cw value down to 0 as saturation goes from 0.5 to 1
cw = 1 - ((saturation - 0.5) * 2)
else:
cw = 1
rgb = vecMul (rgb, saturation * 2)
# scale back to the pilot color space
rgb = vecInt (vecMul (rgb, 255))
cw = int (max (0, cw * cwMax))
if (cw == 0): cw = None;
# scale cw back to 1-255 and return the Pilot Builder that includes the white light
debug (" RGB OUT: {}, CW: {}".format (rgb, cw))
# the wiz light appears to have 5 different LEDs, r, g, b, warm_white, and cold_white
# there appears to be a max power supplied across the 5 LEDs, which explains why all-
# on full isn't the brightest configuration
# warm_white appears to be 2800k, and cold_white appears to be 6200k, somewhat neutral
# brightness is achieved by turning both of them on
return PilotBuilder(rgb = rgb, warm_white = cw, cold_white = cw, brightness = brightness)
