def test_prepare_negative_amplitudes_four_qubits(self):
"""Tests state preparation for a vector on three qubits with negative amplitudes."""
# Input vector
vec = np.array(
[-1, -2, 3, -4, -5, 6, -7, 8, 9, 10, 11, -12, -13, -14, 15, -16],
dtype=np.float64)
# Get the BinaryTree
tree = BinaryTree(vec)
# Create the state preparation circuit
qreg = QuantumRegister(4)
circ = QuantumCircuit(qreg)
tree.preparation_circuit(circ, qreg)
# Add swaps to compare with normal vector ordering
circ.swap(qreg[0], qreg[3])
circ.swap(qreg[1], qreg[2])
# Get the final state of the circuit
state = np.real(self.final_state(circ))
# Only compare the first 16 amplitudes as ancillae may be used to do multi-controlled gates
self.assertTrue(
np.allclose(state[:len(vec)], vec / np.linalg.norm(vec, ord=2)))
def test_prepare_negative_amplitudes_two_qubits2(self):
"""Tests preparing a vector with negative amplitudes on a single qubit."""
# Generate all sign configurations
one_neg = set(permutations((-1, 1, 1, 1)))
two_neg = set(permutations((-1, -1, 1, 1)))
three_neg = set(permutations((-1, -1, -1, 1)))
four_neg = {(-1, -1, -1, -1)}
for sign in one_neg | two_neg | three_neg | four_neg:
# Input vector
vec = np.array([1, 2, 3, 4], dtype=np.float64)
vec *= np.array(sign, dtype=np.float64)
# Get a BinaryTree
tree = BinaryTree(vec)
# Get a quantum register
qreg = QuantumRegister(2)
circ = QuantumCircuit(qreg)
# Get the state preparation circuit
tree.preparation_circuit(circ, qreg)
# Swap qubits to compare with natural ordering of vector
circ.swap(qreg[0], qreg[1])
# Make sure the final state is the same as the input vector
state = np.real(self.final_state(circ))
self.assertTrue(
np.allclose(state, vec / np.linalg.norm(vec, ord=2)))
def test_prep_ctrl_initial_state(self):
"""Creates a state other than all |0> for the control register and tests controlled state preparation."""
# Get a vector and BinaryTree
vec = np.array([0, 1])
tree = BinaryTree(vec)
# Registers and a circuit
reg = QuantumRegister(1)
ctrl_reg = QuantumRegister(2)
circ = QuantumCircuit(reg, ctrl_reg)
# Do a NOT on the first qubit. This makes the control_key = 2 = "10" for preparation to happen.
circ.x(ctrl_reg[0])
# Add the state preparation circuit
tree.preparation_circuit(circ,
reg,
control_register=ctrl_reg,
control_key=2)
# Swap to get normal ordering of amplitudes
circ.swap(reg[0], ctrl_reg[1])
# Make sure the correct state is prepared
# The correct state of the circuit should be |110> = [0, 0, 0, 0, 0, 0, 1, 0].
correct = np.array([0, 0, 0, 0, 0, 0, 1, 0])
state = np.real(self.final_state(circ))
self.assertTrue(np.allclose(state, correct))
def test_prep_with_ctrl_twoq_control_all_keys(self):
"""Tests a one qubit state is created when the correct key is provided, else nothing happens in the circuit."""
# Input vector
vec = np.array([1, 1], dtype=np.float64)
# Zero state
zero = np.array([1, 0], dtype=np.float64)
# Make a binary tree from the vector
tree = BinaryTree(vec)
for control_key in range(4):
# Register to store the vector
register = QuantumRegister(1)
control_register = QuantumRegister(2)
circ = QuantumCircuit(register, control_register)
# Build the circuit
tree.preparation_circuit(circ,
register,
control_register=control_register,
control_key=control_key)
# Get the final state of the circuit
state = self.final_state(circ)
# Make sure the state is the input vector if the correct control key is given, otherwise the |0> state.
if control_key == 0:
self.assertTrue(
np.allclose(state[:len(vec)],
vec / np.linalg.norm(vec, ord=2)))
else:
self.assertTrue(np.allclose(state[:len(vec)], zero))
def test_depth_for_basis_vectors(self):
"""Tests that the circuit depth is one for computational basis vectors."""
for ii in range(8):
vec = np.zeros(8)
vec[ii] = 1
tree = BinaryTree(vec)
qreg = QuantumRegister(3)
circ = QuantumCircuit(qreg)
tree.preparation_circuit(circ, qreg)
circ.swap(qreg[0], qreg[2])
state = np.real(self.final_state(circ))
self.assertTrue(np.allclose(state, vec))
self.assertTrue(circ.depth() <= 2)
def test_prepare_all_zeros(self):
"""Tests that the preparation circuit is empty for a vector of all zero elements.
TODO: What should the behavior be? Throw error? Or return an empty circuit?
"""
vec = [0, 0]
tree = BinaryTree(vec)
reg = QuantumRegister(1)
circ = QuantumCircuit(reg)
tree.preparation_circuit(circ, reg)
self.assertEqual(len(circ), 0)
def test_prep_ctrl_for_basis_vectors(self):
"""Tests that controlled preparation for basis vectors is correct."""
for ii in range(8):
vec = np.zeros(8)
vec[ii] = 1
tree = BinaryTree(vec)
qreg = QuantumRegister(3)
ctrl_reg = QuantumRegister(1)
circ = QuantumCircuit(qreg, ctrl_reg)
tree.preparation_circuit(circ,
qreg,
control_register=ctrl_reg,
control_key=0)
circ.swap(qreg[0], qreg[2])
state = np.real(self.final_state(circ))
self.assertTrue(np.allclose(state[:len(vec)], vec))
def test_number_levels(self):
"""Tests the number of levels is correct for a BinaryTree."""
# Create a tree
tree = BinaryTree(np.ones(32))
# Make sure the number of leaves is correct
self.assertEqual(tree.number_levels, 6)
def test_prepare_negative_amplitudes3(self):
"""Tests preparing a vector with negative amplitudes on a single qubit."""
# Input vector
vec = [-0.6, -0.8]
# Get a BinaryTree
tree = BinaryTree(vec)
# Get the state preparation circuit
qreg = QuantumRegister(1)
circ = QuantumCircuit(qreg)
tree.preparation_circuit(circ, qreg)
# Make sure the final state of the circuit is the same as the input vector
state = np.real(self.final_state(circ))
self.assertTrue(np.allclose(state, vec))
def test_prep_with_ctrl_three_qubit_state(self):
"""Tests creating a three qubit state with a control register of three qubits."""
# Input vector
vec = np.array([1, 1, 1, -5, 1, 1, 1, 1], dtype=np.float64)
# Zero state
zero = np.array([1, 0, 0, 0, 0, 0, 0, 0], dtype=np.float64)
# Make a binary tree from the vector
tree = BinaryTree(vec)
# Registers to store the vector
regA = QuantumRegister(2)
regB = QuantumRegister(1)
# Register to control on
control_register = QuantumRegister(3)
# Circuit
circ = QuantumCircuit(regA, regB, control_register)
for control_key in range(8):
# Build the circuit
tree.preparation_circuit(circ,
regA,
regB,
control_register=control_register,
control_key=control_key)
# Swap the qubits to compare with vector
circ.swap(regA[0], regB[0])
# Get the final state of the circuit
state = np.real(self.final_state(circ))
# Make sure the state is the input vector if the correct control key is given, otherwise the |0> state.
if control_key == 0:
self.assertTrue(
np.allclose(state[:len(vec)],
vec / np.linalg.norm(vec, ord=2)))
else:
self.assertTrue(np.allclose(state[:len(vec)], zero))
# Reset the circuit (clear all operations)
circ.data = []
def test_num_gates_zero_vector(self):
"""Tests that zero gates are used to prepare |0> for multiple qubit numbers."""
# Loop over different qubit numbers
for n in range(2, 6):
# Get the |0> state
vec = np.zeros(2**n)
vec[0] = 1
# Get the BinaryTree
tree = BinaryTree(vec)
# Get the preparation circuit
reg = QuantumRegister(n)
circ = QuantumCircuit(reg)
tree.preparation_circuit(circ, reg)
# Make sure there are no gates
self.assertEqual(len(circ.data), 0)
def test_basic(self):
"""Basic checks for a BinaryTree."""
# Instantiate a BinaryTree
tree = BinaryTree([1, 1])
# Simple checks
self.assertTrue(np.isclose(tree.root, 2.0))
self.assertEqual(tree.number_leaves, 2)
self.assertEqual(tree.number_levels, 2)
def test_prep_circuit_one_qubit3(self):
"""Tests for correctness in preparation circuit on a single qubit."""
# Two element vector
vec = [0.6, 0.8]
# Make a BinaryTree
tree = BinaryTree(vec)
# Get a circuit and register to prepare the vector in
qreg = QuantumRegister(1)
circ = QuantumCircuit(qreg)
# Get the state preparation circuit
tree.preparation_circuit(circ, qreg)
# Get the final state
state = list(np.real(self.final_state(circ)))
self.assertTrue(np.array_equal(state, vec))
def test_prep_circuit_negative_amplitudes_large(self):
"""Tests the state preparation circuit produces the correct state for many qubits."""
# Input vector
vec = -1.0 * np.ones(64)
# Make a tree from the vector
tree = BinaryTree(vec)
# Do the state preparation circuit
qreg = QuantumRegister(6)
circ = QuantumCircuit(qreg)
tree.preparation_circuit(circ, qreg)
# Check that the circuit produces the correct state
# Note: No swaps are necessary here since all amplitudes are equal.
state = np.real(self.final_state(circ))
# Note: The output state has an additional ancilla needed to do the multi-controlled-Y rotations,
# so we discard the additional (zero) amplitudes when comparing to the input vector
self.assertTrue(
np.allclose(state[:len(vec)], vec / np.linalg.norm(vec, ord=2)))
def test_prep_circuit_three_qubits(self):
"""Tests the state preparation circuit produces the correct state on three qubits."""
# Input vector
vec = np.array([1, 2, 3, 4, 5, 6, 7, 8], dtype=np.float64)
# Make a tree from the vector
tree = BinaryTree(vec)
# Get the state preparation circuit
areg = QuantumRegister(2)
breg = QuantumRegister(1)
circ = QuantumCircuit(areg, breg)
tree.preparation_circuit(circ, areg, breg)
# Add a swaps to make the ordering of the qubits match the input vector
# Note: This is because the last bit is the most significant in qiskit, not the first.
circ.swap(areg[0], breg[0])
# Check that the circuit produces the correct state
state = list(np.real(self.final_state(circ)))
self.assertTrue(np.allclose(state, vec / np.linalg.norm(vec, ord=2)))
def test_parent_indices(self):
"""Tests correctness for getting parent indices.
The relevant indexing structure here is:
(0, 0)
^
(1, 0) (1, 1)
^ ^
(2, 0) (2, 1) (2, 2) (2, 3)
"""
tree = BinaryTree([1, 1, 1, 1])
# Test that the parent of root is none
self.assertIsNone(tree.parent_index(0, 0))
# Test that the parent's of the first level are the root
self.assertEqual(tree.parent_index(1, 0), (0, 0))
self.assertEqual(tree.parent_index(1, 1), (0, 0))
# Test that the parent's of the second level are correct
self.assertEqual(tree.parent_index(2, 0), (1, 0))
self.assertEqual(tree.parent_index(2, 1), (1, 0))
self.assertEqual(tree.parent_index(2, 2), (1, 1))
self.assertEqual(tree.parent_index(2, 3), (1, 1))
def test_prepare_negative_amplitudes_three_qubits(self):
"""Tests state preparation for a vector on three qubits with negative amplitudes."""
# Input vector
vec = np.array([-1, -2, 3, -4, -5, 6, -7, 8], dtype=np.float64)
# Get the BinaryTree
tree = BinaryTree(vec)
# Quantum register
regA = QuantumRegister(2)
regB = QuantumRegister(1)
circ = QuantumCircuit(regA, regB)
# Get the state preparation circuit
tree.preparation_circuit(circ, regA, regB)
# Add swaps to compare amplitudes with normal vector ordering
circ.swap(regA[0], regB[0])
# Make sure the final state is equal to the input vector
state = np.real(self.final_state(circ))
self.assertTrue(np.allclose(state, vec / np.linalg.norm(vec, ord=2)))
def test_prep_circuit_random_vector(self):
"""Tests that a random vector is correctly prepared."""
# Input vector
np.random.seed(8675309)
vec = np.random.randn(4)
# Make a tree from the vector
tree = BinaryTree(vec)
# Get a quantum register and circuit
qreg = QuantumRegister(2)
circ = QuantumCircuit(qreg)
# Do the state preparation circuit
tree.preparation_circuit(circ, qreg)
# Swap the qubits to get normal ordering
circ.swap(qreg[0], qreg[1])
state = np.real(self.final_state(circ))
# Make sure the prepared state is close to the input vector
self.assertTrue(np.allclose(state, vec / np.linalg.norm(vec, ord=2)))
def test_prep_circuit_example_in_paper(self):
"""Tests the state preparation circuit produces the correct state
for the example given in the quantum recommendations system paper.
"""
# The same vector used in the paper
vec = [0.4, 0.4, 0.8, 0.2]
# Construct the tree from the vector
tree = BinaryTree(vec)
# Construct the state preparation circuit
qreg = QuantumRegister(2)
circ = QuantumCircuit(qreg)
tree.preparation_circuit(circ, qreg)
# Add a swaps to make the ordering of the qubits match the input vector
# Note: This is because the last bit is the most significant, not the first.
circ.swap(qreg[0], qreg[1])
# Check that the circuit produces the correct state
state = list(np.real(self.final_state(circ)))
self.assertTrue(np.allclose(state, vec))
def test_prep_ctrl_random_threeq(self):
"""Tests preparing a random vector on three qubits, controlled on another register."""
for _ in range(50):
vec = np.random.randn(8)
tree = BinaryTree(vec)
register = QuantumRegister(3)
ctrl_reg = QuantumRegister(2)
circ = QuantumCircuit(register, ctrl_reg)
ctrl_key = 0
tree.preparation_circuit(circ,
register,
control_register=ctrl_reg,
control_key=ctrl_key)
circ.swap(register[0], register[2])
state = np.real(TestBinaryTree.final_state(circ))
self.assertTrue(
np.allclose(state[:len(vec)],
vec / np.linalg.norm(vec, ord=2)))
def test_prepare_negative_amplitudes_two_qubits(self):
"""Tests preparing a vector with negative amplitudes for the example from
the quantum recommendations systems paper.
"""
# Input vector
vec = [-0.4, 0.4, -0.8, 0.2]
# Get a BinaryTree
tree = BinaryTree(vec)
# Get a Quantum Register
regA = QuantumRegister(1)
regB = QuantumRegister(1)
circ = QuantumCircuit(regA, regB)
# Get the state preparation circuit
tree.preparation_circuit(circ, regA, regB)
# Swap the qubits to compare to the natural ordering of the vector
circ.swap(regA[0], regB[0])
# Make sure the final state of the circuit is the same as the input vector
state = np.real(self.final_state(circ))
self.assertTrue(np.allclose(state, vec))
def test_prep_circuit_large2(self):
"""Tests the state preparation circuit produces the correct state for many qubits."""
# Input vector (normalized)
vec = np.array(list(np.ones(32)) + list(np.zeros(32)))
# Make a tree from the vector
tree = BinaryTree(vec)
# Do the state preparation circuit
qreg = QuantumRegister(6)
circ = QuantumCircuit(qreg)
tree.preparation_circuit(circ, qreg)
# Do the swaps to get the ordering of amplitudes to match with the input vector
for ii in range(len(qreg) // 2):
circ.swap(qreg[ii], qreg[-ii - 1])
# Check that the circuit produces the correct state
state = np.real(self.final_state(circ))
# Note: The output state has an additional ancilla needed to do the multi-controlled-Y rotations,
# so we discard the additional (zero) amplitudes when comparing to the input vector
self.assertTrue(
np.allclose(state[:len(vec)], vec / np.linalg.norm(vec, ord=2)))
def test_example_in_paper(self):
"""Tests correctness for the binary tree in the example given in
Appendix A of the quantum recommendation systems paper.
"""
# The same vector used in the paper
row = [0.4, 0.4, 0.8, 0.2]
# Construct the tree from the vector
tree = BinaryTree(row)
# Make sure the elements are equal
self.assertTrue(np.isclose(tree.data[0][0], 1.0))
self.assertTrue(np.isclose(tree.data[1][0], 0.32))
self.assertTrue(np.isclose(tree.data[1][1], 0.68))
self.assertTrue(np.isclose(tree.data[2][0], 0.16))
self.assertTrue(np.isclose(tree.data[2][1], 0.16))
self.assertTrue(np.isclose(tree.data[2][2], 0.64))
self.assertTrue(np.isclose(tree.data[2][3], 0.04))
def test_prep_circuit_with_control(self):
"""Basic test for the state preparation circuit with a control register.
This test makes sure the state is created when the control key is correct and *not* created otherwise.
"""
# Input vector
vec = np.ones(2, dtype=np.float64)
# Zero state
zero = np.array([1, 0], dtype=np.float64)
# Make a tree from the vector
tree = BinaryTree(vec)
# Registers and circuit
register = QuantumRegister(1)
control_register = QuantumRegister(1)
circ = QuantumCircuit(register, control_register)
# Do controlled state preparation (control_key = 0). This should create the state in "register."
tree.preparation_circuit(circ,
register,
control_register=control_register,
control_key=0)
# Get the final state of the circuit
state = self.final_state(circ)
# Make sure we get the correct state
self.assertTrue(
np.allclose(state[:len(vec)], vec / np.linalg.norm(vec, ord=2)))
# Do controlled state preparation (control_key=1). This should not create the state in "register."
# Registers and circuit
register = QuantumRegister(1)
control_register = QuantumRegister(1)
circ = QuantumCircuit(register, control_register)
tree.preparation_circuit(circ,
register,
control_register=control_register,
control_key=1)
# Get the final state of the circuit
state = self.final_state(circ)
# Make sure it's the |0> state (i.e., nothing has happened)
self.assertTrue(np.allclose(state[:len(vec)], zero))
def test_parent_value(self):
"""Tests correctness for getting the parent value of a node."""
# Get a BinaryTree
tree = BinaryTree([1, 1, 1, 1])
# Make sure the parent of the root is None
self.assertIsNone(tree.parent_value(0, 0))
# Make sure the parent's of the first level (root) are correct
self.assertTrue(np.isclose(tree.parent_value(1, 0), 4.0))
self.assertTrue(np.isclose(tree.parent_value(1, 1), 4.0))
# Make sure the parent's of the second level are correct
self.assertTrue(np.isclose(tree.parent_value(2, 0), 2.0))
self.assertTrue(np.isclose(tree.parent_value(2, 1), 2.0))
self.assertTrue(np.isclose(tree.parent_value(2, 2), 2.0))
self.assertTrue(np.isclose(tree.parent_value(2, 3), 2.0))
def test_left_child_index(self):
"""Tests getting the index of the left child."""
# Get a BinaryTree
tree = BinaryTree([1, 2, 3, 4])
# Left child of the root
self.assertEqual(tree.left_child_index(0, 0), (1, 0))
# Left child indices for the first level
self.assertEqual(tree.left_child_index(1, 0), (2, 0))
self.assertEqual(tree.left_child_index(1, 1), (2, 2))
# Left child indices for leaves
self.assertIsNone(tree.left_child_index(2, 0))
self.assertIsNone(tree.left_child_index(2, 1))
self.assertIsNone(tree.left_child_index(2, 2))
self.assertIsNone(tree.left_child_index(2, 3))
def test_prep_with_ctrl_string_keys(self):
"""Does the above test with string control keys."""
# Input vector
vec = np.ones(2, dtype=np.float64)
# Zero state
zero = np.array([1, 0], dtype=np.float64)
# Make a tree from the vector
tree = BinaryTree(vec)
# Register to store the vector
register = QuantumRegister(1)
# Register to control on
control_register = QuantumRegister(1)
# Circuit
circ = QuantumCircuit(register, control_register)
# Do controlled state preparation (control_key = 0). This should create the state in "register."
tree.preparation_circuit(circ,
register,
control_register=control_register,
control_key="0")
# Get the final state of the circuit
state = self.final_state(circ)
# Make sure it's the |0> state (i.e., nothing has happened)
self.assertTrue(
np.allclose(state[:len(vec)], vec / np.linalg.norm(vec, ord=2)))
# Do anti-controlled state preparation (control_key="1"). This should not create the state in "register."
register = QuantumRegister(1)
control_register = QuantumRegister(1)
circ = QuantumCircuit(register, control_register)
tree.preparation_circuit(circ,
register,
control_register=control_register,
control_key="1")
# Get the final state of the circuit
state = self.final_state(circ)
self.assertTrue(np.allclose(state[:len(vec)], zero))
def test_right_child_index(self):
"""Tests getting the index of a right child for a set of nodes."""
# Get a BinaryTree
tree = BinaryTree([1, 2, 3, 4])
# Right child of the root
self.assertEqual(tree.right_child_index(0, 0), (1, 1))
# Right child indices for the first level
self.assertEqual(tree.right_child_index(1, 0), (2, 1))
self.assertEqual(tree.right_child_index(1, 1), (2, 3))
# Right child indices for leaves
self.assertIsNone(tree.right_child_index(2, 0))
self.assertIsNone(tree.right_child_index(2, 1))
self.assertIsNone(tree.right_child_index(2, 2))
self.assertIsNone(tree.right_child_index(2, 3))
def test_right_child_value(self):
"""Tests getting the value of a right child for a set of nodes."""
# Get a BinaryTree
tree = BinaryTree([1, 1, 1, 1])
# Check root value
self.assertTrue(np.isclose(tree.root, 4.0))
# Right child of the root
self.assertTrue(np.isclose(tree.right_child_value(0, 0), 2.0))
# Right child indices for the first level
self.assertTrue(np.isclose(tree.right_child_value(1, 0), 1.0))
self.assertTrue(np.isclose(tree.right_child_value(1, 1), 1.0))
# Right child indices for leaves
self.assertIsNone(tree.right_child_value(2, 0))
self.assertIsNone(tree.right_child_value(2, 1))
self.assertIsNone(tree.right_child_value(2, 2))
self.assertIsNone(tree.right_child_value(2, 3))
def test_print_small(self):
"""Tests the correct string format is obtained when printing a small tree."""
tree = BinaryTree([1, 1])
correct = " 2.00 \n1.00 1.00\n"
self.assertEqual(tree.__str__(), correct)
