def test_read_portal_dpa(self):
z = zones.GetPortalDpaZones()
for name, zone in z.items():
self.assertTrue(zone.geometry.is_valid)
self.assertAlmostEqual(z['BATH'].geometry.area, 0.0, 1)
self.assertEqual(z['BATH'].freqRangeMHz, [(3500, 3650)])
self.assertEqual(z['BATH'].protectionCritDbmPer10MHz, -144)
self.assertEqual(z['BATH'].refHeightMeters, 30)
self.assertEqual(z['BATH'].minAzimuthDeg, 0)
self.assertEqual(z['BATH'].maxAzimuthDeg, 360)
self.assertEqual(z['BATH'].catBNeighborhoodDistanceKm, 240)
def FindOrBuildDpa(dpas, options, grants):
"""Find or build DPA for simulation purpose.
If several DPA, select the one with most grants around (but DPA simulation
options always override the logic).
"""
if options.dpa:
dpa_kml_file = options.dpa_kml or None
dpa = dpa_mgr.BuildDpa(options.dpa,
None,
portal_dpa_filename=dpa_kml_file)
else:
if not dpas:
raise ValueError(
'Config file not defining a DPA and no --dpa option used.')
if len(dpas) == 1:
dpa = dpas[0]
else:
# Roughly find the DPA wth most CBSD within 200km
all_cbsds = sgeo.MultiPoint([(g.longitude, g.latitude)
for g in grants])
num_cbsds_inside = [
len(dpa.geometry.buffer(2.5).intersection(all_cbsds))
for dpa in dpas
]
dpa = dpas[np.argmax(num_cbsds_inside)]
try:
dpa.margin_db
except AttributeError:
dpa.margin_db = 'linear(1.5)'
try:
dpa.geometry
except AttributeError:
try:
dpa_geometry = zones.GetCoastalDpaZones()[dpa.name]
except KeyError:
dpa_geometry = zones.GetPortalDpaZones(
kml_path=dpa_kml_file)[dpa.name]
dpa.geometry = dpa_geometry.geometry
if options.dpa_builder:
dpa.protected_points = dpa_builder.DpaProtectionPoints(
dpa.name, dpa.geometry, options.dpa_builder)
if options.margin_db: # Override `movelistMargin` directive.
try:
dpa.margin_db = float(options.margin_db)
except ValueError:
dpa.margin_db = options.margin_db
return dpa
def _IprConfigRead(config):
"""Extracts DPA and grants from IPR config JSON.
Note: All IPT suppprted except IPR1.
Args:
config: A JSON dictionary.
Returns:
A tuple (dpas, grants) where:
dpas: a list of objects of type |dpa_mgr.Dpa|.
grants: a list of |data.CbsdGrantInfo|.
"""
dpa_cfgs = None
if 'portalDpa' in config:
dpa_cfgs = [config['portalDpa']]
elif 'escDpa' in config:
dpa_cfgs = [config['escDpa']]
if dpa_cfgs is None:
if 'dpas' in config:
dpa_cfgs = config['dpas']
elif 'dpa' in config:
dpa_cfgs = [config['dpa']]
if dpa_cfgs is None or ('domainProxies' not in config
and 'registrationRequest' not in config):
raise ValueError(
'Unsupported config file. Please use a IPR config file')
# Build the DPAs
dpas = []
for dpa_cfg in dpa_cfgs:
dpa_id = dpa_cfg['dpaId']
try:
dpa_kml_file = config['dpaDatabaseConfig']['filePath']
except KeyError:
dpa_kml_file = None
try:
points_builder = dpa_cfg['points_builder']
except KeyError:
points_builder = None
try:
dpa = dpa_mgr.BuildDpa(dpa_id,
protection_points_method=points_builder,
portal_dpa_filename=dpa_kml_file)
except IOError:
print('Portal KML File not found: %s ' % dpa_kml_file)
raise
try:
freq_range_mhz = (dpa_cfg['frequencyRange']['lowFrequency'] / 1.e6,
dpa_cfg['frequencyRange']['highFrequency'] /
1.e6)
dpa.ResetFreqRange([freq_range_mhz])
except KeyError:
pass
# - add extra properties for the geometry and margin
try:
dpa.margin_db = dpa_cfg['movelistMargin']
except KeyError:
dpa_margin_db = 'linear(1.5)'
try:
dpa_zone = zones.GetCoastalDpaZones()[dpa_id]
except KeyError:
dpa_zone = zones.GetPortalDpaZones(kml_path=dpa_kml_file)[dpa_id]
dpa.geometry = dpa_zone.geometry
dpas.append(dpa)
# Read the CBSDs, assuming all granted, into list of |CbsdGrantInfo|.
grants = []
if 'domainProxies' in config:
# - first the SAS UUT
for domain_proxy_config in config['domainProxies']:
grant_requests = domain_proxy_config['grantRequests']
reg_requests = MergeConditionalData(
domain_proxy_config['registrationRequests'],
domain_proxy_config['conditionalRegistrationData'])
grants.extend(
data.getGrantsFromRequests(reg_requests,
grant_requests,
is_managing_sas=True))
# - now the peer SASes.
if 'sasTestHarnessConfigs' in config:
for th_config in config['sasTestHarnessConfigs']:
dump_records = th_config['fullActivityDumpRecords'][0]
grants.extend(
data.getAllGrantInfoFromCbsdDataDump(
dump_records, is_managing_sas=False))
elif 'registrationRequest' in config:
grants.extend(
data.getGrantsFromRequests(
MergeConditionalData([config['registrationRequest']],
[config['conditionalRegistrationData']]),
[config['grantRequest']],
is_managing_sas=True))
return grants, dpas
def _McpConfigRead(config):
"""Extracts DPA and grants from MCP config JSON.
Note: returns all grants involved in the test irrespective of iteration
process.
Args:
config: A JSON dictionary.
Returns:
A tuple (dpas, grants) where:
dpas: a list of objects of type |dpa_mgr.Dpa|.
grants: a list of |data.CbsdGrantInfo|.
"""
if ('iterationData' not in config or 'dpas' not in config
or 'initialCbsdRequestsWithDomainProxies' not in config):
raise ValueError(
'Unsupported config file. Please use a MCP1 config file')
# Build the DPAs.
dpas = []
for dpa_id, dpa_data in config['dpas'].items():
dpa = dpa_mgr.BuildDpa(
dpa_id, protection_points_method=dpa_data['points_builder'])
# - add extra properties for the geometry and margin.
dpa.margin_db = dpa_data['movelistMargin']
try:
dpa_zone = zones.GetCoastalDpaZones()[dpa_id]
except KeyError:
dpa_zone = zones.GetPortalDpaZones(kml_path=dpa_kml_file)[dpa_id]
dpa.geometry = dpa_zone.geometry
# - read also the activation list and freq range.
dpa.activation = None
for iter_data in config['iterationData']:
for activation in iter_data['dpaActivationList']:
if activation['dpaId'] == dpa_id:
dpa.activation = activation['frequencyRange']
break
dpas.append(dpa)
# Read the CBSDs, assuming all granted, into list of |CbsdGrantInfo|.
# - initial stuff into SAS UUT
grants = []
for records in config['initialCbsdRequestsWithDomainProxies']:
grant_requests = records['grantRequests']
reg_requests = MergeConditionalData(
records['registrationRequests'],
records['conditionalRegistrationData'])
grants.extend(
data.getGrantsFromRequests(reg_requests,
grant_requests,
is_managing_sas=True))
for record in config['initialCbsdRecords']:
grant_request = [record['grantRequest']]
reg_request = MergeConditionalData(
[record['registrationRequest']],
[record['conditionalRegistrationData']])
grants.append(
data.getGrantsFromRequests(reg_requests,
grant_requests,
is_managing_sas=True))
# - then iterations for TH and UUT
for iter_data in config['iterationData']:
for th_data in iter_data['sasTestHarnessData']:
th_grants = data.getAllGrantInfoFromCbsdDataDump(
th_data['cbsdRecords'], is_managing_sas=False)
grants.extend([g for g in th_grants])
for records in iter_data['cbsdRequestsWithDomainProxies']:
grant_requests = records['grantRequests']
reg_requests = MergeConditionalData(
records['registrationRequests'],
records['conditionalRegistrationData'])
uut_grants = data.getGrantsFromRequests(reg_requests,
grant_requests,
is_managing_sas=True)
grants.extend([g for g in uut_grants])
for record in iter_data['cbsdRecords']:
grant_request = [record['grantRequest']]
reg_request = MergeConditionalData(
[record['registrationRequest']],
[record['conditionalRegistrationData']])
uut_grant = data.getGrantsFromRequests(reg_requests,
grant_requests,
is_managing_sas=True)
grants.append(uut_grant)
return grants, dpas
def BuildDpa(dpa_name,
protection_points_method=None,
portal_dpa_filename=None):
"""Builds a DPA parameterized correctly.
The DPA special parameters are obtained from the DPA database.
The DPA protection points are generated either from a file, or using a provided default
method.
Args:
dpa_name: The DPA official name.
protection_points_method: Three methods are supported for getting the protection points:
+ a path pointing to the file holding the protected points location defined as a
geojson MultiPoint or Point geometry. The path can be either absolute or relative
to the running script (normally the `harness/` directory).
+ 'default <parameters>': A simple default method. Parameters is a tuple defining
the number of points to use for different part of the DPA:
num_pts_front_border: Number of points in the front border
num_pts_back_border: Number of points in the back border
num_pts_front_zone: Number of points in the front zone
num_pts_back_zone: Number of points in the back zone
front_us_border_buffer_km: Buffering of US border for delimiting front/back.
min_dist_front_border_pts_km: Minimum distance between front border points (km).
min_dist_back_border_pts_km: Minimum distance between back border points (km).
min_dist_front_zone_pts_km: Minimum distance between front zone points (km).
min_dist_back_zone_pts_km: Minimum distance between back zone points (km).
Example of encoding:
'default (200,50,20,5)'
Note the default values are (25, 10, 10, 5, 40, 0.2, 1, 0.5, 3)
Only the passed parameters will be redefined.
The result are only approximate (actual distance and number of points may differ).
+ other 'my_method (p1, p2, ..pk)': The 'my_method` will be checked against registered
methods in which case it will be used, and passing to it the parameters p1, p2,...
Returns:
A Dpa object.
Raises:
IOError: if the provided file cannot be found.
ValueError: in case of other errors, such as invalid file or parameters.
"""
try:
dpa_zone = zones.GetCoastalDpaZones()[dpa_name]
monitor_type = 'esc'
except KeyError:
try:
dpa_zone = zones.GetPortalDpaZones(
kml_path=portal_dpa_filename)[dpa_name]
monitor_type = 'portal'
except KeyError:
raise ValueError('DPA %s not found in DPA database' % dpa_name)
# Get the DPA protection points
protection_points = dpa_builder.DpaProtectionPoints(
dpa_name, dpa_zone.geometry, protection_points_method)
# Set all DPA operational parameters
protection_threshold = dpa_zone.protectionCritDbmPer10MHz
radar_height = dpa_zone.refHeightMeters
radar_beamwidth = dpa_zone.antennaBeamwidthDeg
azimuth_range = (dpa_zone.minAzimuthDeg, dpa_zone.maxAzimuthDeg)
freq_ranges_mhz = dpa_zone.freqRangeMHz
neighbor_distances = (dpa_zone.catANeighborhoodDistanceKm,
dpa_zone.catBNeighborhoodDistanceKm,
dpa_zone.catAOOBNeighborhoodDistanceKm,
dpa_zone.catBOOBNeighborhoodDistanceKm)
return Dpa(protection_points,
name=dpa_name,
threshold=protection_threshold,
radar_height=radar_height,
beamwidth=radar_beamwidth,
azimuth_range=azimuth_range,
freq_ranges_mhz=freq_ranges_mhz,
neighbor_distances=neighbor_distances,
monitor_type=monitor_type)