def retrieve_config():
'''
Use SSH to retrieve the network device running configuration.
'''
DEBUG = True
net_devices = NetworkDevice.objects.all()
for a_device in net_devices:
if 'ssh' in a_device.device_class:
if DEBUG:
print "Retrieve device configuration: {} {}\n".format(
a_device.device_name, a_device.device_class)
ssh_connect = SSHConnection(a_device)
ssh_connect.enable_mode()
output = ssh_connect.send_command('show run\n')
file_name = a_device.device_name + '.txt'
full_path = CFGS_DIR + file_name
if DEBUG:
print "Writing configuration file to file system\n"
with open(full_path, 'w') as f:
f.write(output)
def retrieve_config():
'''
Use SSH to retrieve the network device running configuration.
'''
DEBUG = True
net_devices = NetworkDevice.objects.all()
for a_device in net_devices:
if 'ssh' in a_device.device_class:
if DEBUG:
print "Retrieve device configuration: {} {}\n".format(a_device.device_name,
a_device.device_class)
ssh_connect = SSHConnection(a_device)
ssh_connect.enable_mode()
output = ssh_connect.send_command('show run\n')
file_name = a_device.device_name + '.txt'
full_path = CFGS_DIR + file_name
if DEBUG:
print "Writing configuration file to file system\n"
with open(full_path, 'w') as f:
f.write(output)
def backup_config(a_device):
DEBUG = True
perform_diff = False
if DEBUG: print "Retrieve device configuration via SSH: {}\n".format(a_device.device_name)
ssh_connect = SSHConnection(a_device)
ssh_connect.enable_mode()
output = ssh_connect.send_command('show run\n')
file_name = a_device.device_name + '.txt'
full_path = global_params.CFGS_DIR + file_name
bup_file = global_params.CFGS_DIR + a_device.device_name + '.old'
# Check if file already exists
if os.path.isfile(full_path):
# Create copy of old file
cmd_status = subprocess.call(['/bin/mv', full_path, bup_file])
perform_diff = True
if DEBUG: print "Writing configuration file to file system\n"
with open(full_path, 'w') as f:
f.write(output)
a_device.cfg_file = file_name
a_device.cfg_archive_time = timezone.make_aware(datetime.now(), timezone.get_current_timezone())
# obtain last_changed time (Cisco specific)
a_device.cfg_last_changed = int(snmp_wrapper(a_device, oid=global_params.OID_RUNNING_LAST_CHANGED))
a_device.save()
if perform_diff:
return find_diff(full_path, bup_file)
else:
return None
def inventory_dispatcher():
'''
Dispatcher for calling SSH, onePK, or eAPI based on the
NetworkDevice.device_class
'''
DEBUG = True
# Single location to specify the relevant GatherInventory class to use
class_mapper = {
'cisco_ios_ssh': CiscoGatherInventory,
'arista_eos_ssh': AristaGatherInventory,
}
net_devices = NetworkDevice.objects.all()
for a_device in net_devices:
if 'ssh' in a_device.device_class:
if DEBUG:
print "SSH inventory call: {} {}\n".format(
a_device.device_name, a_device.device_class)
ssh_connect = SSHConnection(a_device)
output = ssh_connect.send_command('show version\n')
inventory_obj = class_mapper[a_device.device_class](a_device,
output)
inventory_obj.find_vendor()
inventory_obj.find_model()
inventory_obj.find_device_type()
inventory_obj.find_os_version()
inventory_obj.find_serial_number()
inventory_obj.find_uptime()
print 'Inventory gathering for device complete'
print_inventory(a_device)
elif 'onepk' in a_device.device_class:
if DEBUG:
print "onePK inventory call: {} {}\n".format(
a_device.device_name, a_device.device_class)
pass
elif 'eapi' in a_device.device_class:
if DEBUG:
print "eAPI inventory call: {} {}\n".format(
a_device.device_name, a_device.device_class)
pass
else:
# invalid condition / exception
pass
def inventory_dispatcher():
'''
Dispatcher for calling SSH, onePK, or eAPI based on the
NetworkDevice.device_class
'''
DEBUG = True
# Single location to specify the relevant GatherInventory class to use
class_mapper = {
'cisco_ios_ssh' : CiscoGatherInventory,
'arista_eos_ssh' : AristaGatherInventory,
}
net_devices = NetworkDevice.objects.all()
for a_device in net_devices:
if 'ssh' in a_device.device_class:
if DEBUG:
print "SSH inventory call: {} {}\n".format(a_device.device_name,
a_device.device_class)
ssh_connect = SSHConnection(a_device)
output = ssh_connect.send_command('show version\n')
inventory_obj = class_mapper[a_device.device_class](a_device, output)
inventory_obj.find_vendor()
inventory_obj.find_model()
inventory_obj.find_device_type()
inventory_obj.find_os_version()
inventory_obj.find_serial_number()
inventory_obj.find_uptime()
print 'Inventory gathering for device complete'
print_inventory(a_device)
elif 'onepk' in a_device.device_class:
if DEBUG:
print "onePK inventory call: {} {}\n".format(a_device.device_name,
a_device.device_class)
pass
elif 'eapi' in a_device.device_class:
if DEBUG:
print "eAPI inventory call: {} {}\n".format(a_device.device_name,
a_device.device_class)
pass
else:
# invalid condition / exception
pass
def backup_config(a_device):
'''
Retrieve configuration from network device, save to filesystem.
'''
DEBUG = True
perform_diff = False
if DEBUG:
print "Retrieve device configuration via SSH: {}\n".format(
a_device.device_name)
ssh_connect = SSHConnection(a_device)
ssh_connect.enable_mode()
output = ssh_connect.send_command('show run\n')
file_name = a_device.device_name + '.txt'
full_path = global_params.CFGS_DIR + file_name
bup_file = global_params.CFGS_DIR + a_device.device_name + '.old'
# Check if file already exists
if os.path.isfile(full_path):
# Create copy of old file
cmd_status = subprocess.call(['/bin/mv', full_path, bup_file])
perform_diff = True
if DEBUG:
print "Writing configuration file to file system\n"
with open(full_path, 'w') as f:
f.write(output)
a_device.cfg_file = file_name
a_device.cfg_archive_time = timezone.make_aware(
datetime.now(), timezone.get_current_timezone())
# obtain last_changed time (Cisco specific)
a_device.cfg_last_changed = int(
snmp_wrapper(a_device, oid=global_params.OID_RUNNING_LAST_CHANGED))
a_device.save()
if perform_diff:
return find_diff(full_path, bup_file)
else:
return None
def inventory_dispatcher():
'''
Dispatcher for calling SSH, onePK, or eAPI based on the
NetworkDevice.device_class
'''
DEBUG = True
net_devices = NetworkDevice.objects.all()
for a_device in net_devices:
if 'ssh' in a_device.device_class:
if DEBUG:
print "SSH inventory call: {} {}\n".format(a_device.device_name,
a_device.device_class)
ssh_connect = SSHConnection(a_device)
output = ssh_connect.send_command('show version\n')
inventory_obj = CLASS_MAPPER[a_device.device_class](a_device, output)
inventory_obj.find_vendor()
inventory_obj.find_model()
inventory_obj.find_device_type()
inventory_obj.find_os_version()
inventory_obj.find_serial_number()
inventory_obj.find_uptime()
print 'Inventory gathering for device complete'
print_inventory(a_device)
elif 'onepk' in a_device.device_class:
if DEBUG:
print "onePK inventory call: {} {}\n".format(a_device.device_name,
a_device.device_class)
# FIX - pin_file is hard-coded
onepk_connect = onepk_helper.NetworkDevice(
ip=a_device.ip_address,
username=a_device.credentials.username,
password=a_device.credentials.password,
port=a_device.api_port,
pin_file='pynet-rtr1-pin.txt'
)
onepk_connect.establish_session()
a_device.vendor = 'cisco'
part_number = onepk_connect.net_element.properties.product_id
a_device.model = onepk_find_model(part_number)
a_device.device_type = onepk_find_device_type(a_device.model)
sys_descr = onepk_connect.net_element.properties.sys_descr
a_device.os_version = onepk_find_os_version(sys_descr)
a_device.serial_number = onepk_connect.net_element.properties.SerialNo
a_device.uptime_seconds = onepk_connect.net_element.properties.sys_uptime
a_device.save()
onepk_connect.disconnect()
print 'Inventory gathering for device complete'
print_inventory(a_device)
elif 'eapi' in a_device.device_class:
if DEBUG:
print "eAPI inventory call: {} {}\n".format(a_device.device_name,
a_device.device_class)
eapi_conn = eapilib.create_connection(
hostname=a_device.ip_address,
username=a_device.credentials.username,
password=a_device.credentials.password,
port=a_device.api_port
)
response = eapi_conn.run_commands(['show version'])
arista_dict = response[0]
a_device.vendor = 'arista'
a_device.model = arista_dict['modelName']
# Should really be a function
if a_device.model == 'vEOS':
a_device.device_type = 'switch'
else:
a_device.device_type = ''
a_device.os_version = arista_dict['version']
a_device.serial_number = arista_dict['serialNumber']
# Should normalize the MacAddress format
if not a_device.serial_number:
a_device.serial_number = arista_dict['systemMacAddress']
# bootupTimestamp is since epoch. Requires time on router to be right.
uptime_seconds = arista_dict['bootupTimestamp']
time_delta = time.time() - int(uptime_seconds)
a_device.uptime_seconds = int(time_delta)
a_device.save()
print 'Inventory gathering for device complete'
print_inventory(a_device)
else:
# invalid condition / exception
pass
def inventory_dispatcher():
'''
Dispatcher for calling SSH, onePK, or eAPI based on the
NetworkDevice.device_class
'''
DEBUG = True
net_devices = NetworkDevice.objects.all()
for a_device in net_devices:
if 'ssh' in a_device.device_class:
if DEBUG:
print "SSH inventory call: {} {}\n".format(
a_device.device_name, a_device.device_class)
ssh_connect = SSHConnection(a_device)
output = ssh_connect.send_command('show version\n')
inventory_obj = CLASS_MAPPER[a_device.device_class](a_device,
output)
inventory_obj.find_vendor()
inventory_obj.find_model()
inventory_obj.find_device_type()
inventory_obj.find_os_version()
inventory_obj.find_serial_number()
inventory_obj.find_uptime()
print 'Inventory gathering for device complete'
print_inventory(a_device)
elif 'onepk' in a_device.device_class:
if DEBUG:
print "onePK inventory call: {} {}\n".format(
a_device.device_name, a_device.device_class)
# FIX - pin_file is hard-coded
onepk_connect = onepk_helper.NetworkDevice(
ip=a_device.ip_address,
username=a_device.credentials.username,
password=a_device.credentials.password,
port=a_device.api_port,
pin_file='pynet-rtr1-pin.txt')
onepk_connect.establish_session()
a_device.vendor = 'cisco'
part_number = onepk_connect.net_element.properties.product_id
a_device.model = onepk_find_model(part_number)
a_device.device_type = onepk_find_device_type(a_device.model)
sys_descr = onepk_connect.net_element.properties.sys_descr
a_device.os_version = onepk_find_os_version(sys_descr)
a_device.serial_number = onepk_connect.net_element.properties.SerialNo
a_device.uptime_seconds = onepk_connect.net_element.properties.sys_uptime
a_device.save()
onepk_connect.disconnect()
print 'Inventory gathering for device complete'
print_inventory(a_device)
elif 'eapi' in a_device.device_class:
if DEBUG:
print "eAPI inventory call: {} {}\n".format(
a_device.device_name, a_device.device_class)
eapi_conn = eapilib.create_connection(
hostname=a_device.ip_address,
username=a_device.credentials.username,
password=a_device.credentials.password,
port=a_device.api_port)
response = eapi_conn.run_commands(['show version'])
arista_dict = response[0]
a_device.vendor = 'arista'
a_device.model = arista_dict['modelName']
# Should really be a function
if a_device.model == 'vEOS':
a_device.device_type = 'switch'
else:
a_device.device_type = ''
a_device.os_version = arista_dict['version']
a_device.serial_number = arista_dict['serialNumber']
# Should normalize the MacAddress format
if not a_device.serial_number:
a_device.serial_number = arista_dict['systemMacAddress']
# bootupTimestamp is since epoch. Requires time on router to be right.
uptime_seconds = arista_dict['bootupTimestamp']
time_delta = time.time() - int(uptime_seconds)
a_device.uptime_seconds = int(time_delta)
a_device.save()
print 'Inventory gathering for device complete'
print_inventory(a_device)
else:
# invalid condition / exception
pass