def add_pci_device(self, node, *pci_devices):
"""Add PCI device configuration for node.
:param node: DUT node.
:param pci_devices: PCI devices (format 0000:00:00.0 or 00:00.0)
:type node: dict
:type pci_devices: tuple
:returns: nothing
"""
if node['type'] != NodeType.DUT:
raise ValueError('Node type is not a DUT')
# Specific device was given.
hostname = Topology.get_node_hostname(node)
pattern = re.compile("^[0-9A-Fa-f]{4}:[0-9A-Fa-f]{2}:"
"[0-9A-Fa-f]{2}\\.[0-9A-Fa-f]$")
for pci_device in pci_devices:
if not pattern.match(pci_device):
raise ValueError('PCI address {} to be added to host {} '
'is not in valid format xxxx:xx:xx.x'.
format(pci_device, hostname))
if hostname not in self._nodeconfig:
self._nodeconfig[hostname] = {}
if 'pci_addrs' not in self._nodeconfig[hostname]:
self._nodeconfig[hostname]['pci_addrs'] = []
self._nodeconfig[hostname]['pci_addrs'].append(pci_device)
logger.debug('Adding PCI device {1} to {0}'.format(hostname,
pci_device))
def add_cryptodev_config(self, node, count):
"""Add cryptodev configuration for node.
:param node: DUT node.
:param count: Number of crypto devices to add.
:type node: dict
:type count: int
:returns: nothing
:raises ValueError: If node type is not a DUT
"""
if node['type'] != NodeType.DUT:
raise ValueError('Node type is not a DUT')
hostname = Topology.get_node_hostname(node)
if hostname not in self._nodeconfig:
self._nodeconfig[hostname] = {}
cryptodev = Topology.get_cryptodev(node)
cryptodev_config = ''
for i in range(count):
cryptodev_config += 'dev {}\n'.format(
re.sub(r'\d.\d$', '1.'+str(i), cryptodev))
self._nodeconfig[hostname]['cryptodev_config'] = cryptodev_config
logger.debug('Setting hostname {} Cryptodev config to {}'.
format(hostname, cryptodev_config))
uio_driver_config = 'uio-driver {}'.\
format(Topology.get_uio_driver(node))
self._nodeconfig[hostname]['uio_driver_config'] = uio_driver_config
logger.debug('Setting hostname {} uio_driver config to {}'.
format(hostname, uio_driver_config))
def set_node(self, node):
"""Set DUT node.
:param node: Node to store configuration on.
:type node: dict
:raises RuntimeError: If Node type is not DUT.
"""
if node['type'] != NodeType.DUT:
raise RuntimeError('Startup config can only be applied to DUT'
'node.')
self._node = node
self._hostname = Topology.get_node_hostname(node)
def remove_snat_config(self, node):
"""Remove SNAT configuration for the node.
:param node: DUT node.
:type node: dict
:returns: nothing
"""
if node['type'] != NodeType.DUT:
raise ValueError('Node type is not a DUT')
hostname = Topology.get_node_hostname(node)
if hostname in self._nodeconfig:
self._nodeconfig[hostname]['snat_config'] = []
logger.debug('Clearing SNAT config for hostname {}.'.format(hostname))
def remove_enable_vhost_user_config(self, node):
"""Remove enable-vhost-user configuration from node.
:param node: DUT node.
:type node: dict
:returns: nothing
"""
if node['type'] != NodeType.DUT:
raise ValueError('Node type is not a DUT')
hostname = Topology.get_node_hostname(node)
if hostname in self._nodeconfig:
self._nodeconfig[hostname]['enable_vhost_user'] = []
logger.debug('Clearing enable-vhost-user config for hostname {}.'.
format(hostname))
def remove_heapsize_config(self, node):
"""Remove Heap Size configuration from node.
:param node: DUT node.
:type node: dict
:returns: nothing
"""
if node['type'] != NodeType.DUT:
raise ValueError('Node type is not a DUT')
hostname = Topology.get_node_hostname(node)
if hostname in self._nodeconfig:
self._nodeconfig[hostname].pop('heapsize_config', None)
logger.debug('Clearing Heap Size config for hostname {}.'.
format(hostname))
def remove_all_pci_devices(self, node):
"""Remove PCI device configuration from node.
:param node: DUT node.
:type node: dict
:returns: nothing
"""
if node['type'] != NodeType.DUT:
raise ValueError('Node type is not a DUT')
hostname = Topology.get_node_hostname(node)
if hostname in self._nodeconfig:
self._nodeconfig[hostname]['pci_addrs'] = []
logger.debug('Clearing all PCI devices for hostname {}.'.
format(hostname))
def add_no_multi_seg_config(self, node):
"""Add No Multi Seg configuration for node.
:param node: DUT node.
:type node: dict
:returns: nothing
"""
if node['type'] != NodeType.DUT:
raise ValueError('Node type is not a DUT')
hostname = Topology.get_node_hostname(node)
if hostname not in self._nodeconfig:
self._nodeconfig[hostname] = {}
if 'no_multi_seg_config' not in self._nodeconfig[hostname]:
self._nodeconfig[hostname]['no_multi_seg_config'] = []
self._nodeconfig[hostname]['no_multi_seg_config'].append("no-multi-seg")
logger.debug('Setting hostname {} config with {}'.
format(hostname, "no-multi-seg"))
def add_snat_config(self, node):
"""Add SNAT configuration for the node.
:param node: DUT node.
:type node: dict
:returns: nothing
"""
if node['type'] != NodeType.DUT:
raise ValueError('Node type is not a DUT')
hostname = Topology.get_node_hostname(node)
if hostname not in self._nodeconfig:
self._nodeconfig[hostname] = {}
if 'snat_config' not in self._nodeconfig[hostname]:
self._nodeconfig[hostname]['snat_config'] = []
self._nodeconfig[hostname]['snat_config'].append("deterministic")
logger.debug('Setting hostname {} config with {}'.
format(hostname, "SNAT"))
def add_heapsize_config(self, node, heapsize_config):
"""Add Heap Size configuration for node.
:param node: DUT node.
:param heapsize_config: Heap Size configuration, as a string.
:type node: dict
:type heapsize_config: str
:returns: nothing
"""
if node['type'] != NodeType.DUT:
raise ValueError('Node type is not a DUT')
hostname = Topology.get_node_hostname(node)
if hostname not in self._nodeconfig:
self._nodeconfig[hostname] = {}
self._nodeconfig[hostname]['heapsize_config'] = heapsize_config
logger.debug('Setting hostname {} Heap Size config to {}'.
format(hostname, heapsize_config))
def add_enable_vhost_user_config(self, node):
"""Add enable-vhost-user configuration for node.
:param node: DUT node.
:type node: dict
:returns: nothing
"""
if node['type'] != NodeType.DUT:
raise ValueError('Node type is not a DUT')
hostname = Topology.get_node_hostname(node)
if hostname not in self._nodeconfig:
self._nodeconfig[hostname] = {}
if 'enable_vhost_user' not in self._nodeconfig[hostname]:
self._nodeconfig[hostname]['enable_vhost_user'] = []
self._nodeconfig[hostname]['enable_vhost_user'].\
append("enable-vhost-user")
logger.debug('Setting hostname {} config with {}'.
format(hostname, "enable-vhost-user"))
def add_socketmem_config(self, node, socketmem_config):
"""Add Socket Memory configuration for node.
:param node: DUT node.
:param socketmem_config: Socket Memory configuration option,
as a string.
:type node: dict
:type socketmem_config: str
:returns: nothing
"""
if node['type'] != NodeType.DUT:
raise ValueError('Node type is not a DUT')
hostname = Topology.get_node_hostname(node)
if hostname not in self._nodeconfig:
self._nodeconfig[hostname] = {}
self._nodeconfig[hostname]['socketmem_config'] = socketmem_config
logger.debug('Setting hostname {} Socket Memory config to {}'.
format(hostname, socketmem_config))
def add_rxqueues_config(self, node, rxqueues_config):
"""Add Rx Queues configuration for node.
:param node: DUT node.
:param rxqueues_config: Rxqueues configuration, as a string.
:type node: dict
:type rxqueues_config: str
:returns: nothing
"""
if node['type'] != NodeType.DUT:
raise ValueError('Node type is not a DUT')
hostname = Topology.get_node_hostname(node)
if hostname not in self._nodeconfig:
self._nodeconfig[hostname] = {}
if 'rxqueues_config' not in self._nodeconfig[hostname]:
self._nodeconfig[hostname]['rxqueues_config'] = []
self._nodeconfig[hostname]['rxqueues_config'].append(rxqueues_config)
logger.debug('Setting hostname {} rxqueues config to {}'.
format(hostname, rxqueues_config))
def add_cpu_config(self, node, cpu_config):
"""Add CPU configuration for node.
:param node: DUT node.
:param cpu_config: CPU configuration option, as a string.
:type node: dict
:type cpu_config: str
:returns: nothing
"""
if node['type'] != NodeType.DUT:
raise ValueError('Node type is not a DUT')
hostname = Topology.get_node_hostname(node)
if hostname not in self._nodeconfig:
self._nodeconfig[hostname] = {}
if 'cpu_config' not in self._nodeconfig[hostname]:
self._nodeconfig[hostname]['cpu_config'] = []
self._nodeconfig[hostname]['cpu_config'].append(cpu_config)
logger.debug('Adding {} to hostname {} CPU config'.format(hostname,
cpu_config))
def apply_config(self, node, waittime=5, retries=12):
"""Generate and apply VPP configuration for node.
Use data from calls to this class to form a startup.conf file and
replace /etc/vpp/startup.conf with it on node.
:param node: DUT node.
:param waittime: Time to wait for VPP to restart (default 5 seconds).
:param retries: Number of times (default 12) to re-try waiting.
:type node: dict
:type waittime: int
:type retries: int
:raises RuntimeError: If writing config file failed, or restarting of
VPP failed.
"""
if node['type'] != NodeType.DUT:
raise ValueError('Node type is not a DUT')
hostname = Topology.get_node_hostname(node)
cpuconfig = ""
pciconfig = ""
socketmemconfig = DEFAULT_SOCKETMEM_CONFIG
heapsizeconfig = ""
rxqueuesconfig = ""
txqueuesconfig = ""
nomultiseg = ""
enablevhostuser = ""
cryptodevconfig = ""
uiodriverconfig = ""
snatconfig = ""
if hostname in self._nodeconfig:
cfg = self._nodeconfig[hostname]
if 'cpu_config' in cfg:
cpuconfig = " " + "\n ".join(cfg['cpu_config'])
if 'pci_addrs' in cfg:
pciconfig = " dev " + "\n dev ".join(cfg['pci_addrs'])
if 'socketmem_config' in cfg:
socketmemconfig = cfg['socketmem_config']
if 'cryptodev_config' in cfg:
cryptodevconfig = cfg['cryptodev_config']
if 'uio_driver_config' in cfg:
uiodriverconfig = cfg['uio_driver_config']
if 'heapsize_config' in cfg:
heapsizeconfig = "\nheapsize {}\n".\
format(cfg['heapsize_config'])
if 'rxqueues_config' in cfg:
rxqueuesconfig = " " + "\n ".join(cfg['rxqueues_config'])
if 'no_multi_seg_config' in cfg:
nomultiseg = " " + "\n ".join(cfg['no_multi_seg_config'])
if 'enable_vhost_user' in cfg:
enablevhostuser = "******" + "\n ".join(cfg['enable_vhost_user'])
if 'snat_config' in cfg:
snatconfig = "snat {\n"
snatconfig += " " + "\n ".join(cfg['snat_config'])
snatconfig += "\n}"
vppconfig = VPP_CONFIG_TEMPLATE.format(cpuconfig=cpuconfig,
pciconfig=pciconfig,
cryptodevconfig=cryptodevconfig,
uiodriverconfig=uiodriverconfig,
socketmemconfig=socketmemconfig,
heapsizeconfig=heapsizeconfig,
rxqueuesconfig=rxqueuesconfig,
txqueuesconfig=txqueuesconfig,
nomultiseg=nomultiseg,
enablevhostuser=enablevhostuser,
snatconfig=snatconfig)
logger.debug('Writing VPP config to host {}: "{}"'.format(hostname,
vppconfig))
ssh = SSH()
ssh.connect(node)
# We're using this "| sudo tee" construct because redirecting
# a sudo'd outut ("sudo echo xxx > /path/to/file") does not
# work on most platforms...
(ret, stdout, stderr) = \
ssh.exec_command('echo "{0}" | sudo tee {1}'.
format(vppconfig, VPP_CONFIG_FILENAME))
if ret != 0:
logger.debug('Writing config file failed to node {}'.
format(hostname))
logger.debug('stdout: {}'.format(stdout))
logger.debug('stderr: {}'.format(stderr))
raise RuntimeError('Writing config file failed to node {}'.
format(hostname))
# Instead of restarting, we'll do separate start and stop
# actions. This way we don't care whether VPP was running
# to begin with.
ssh.exec_command('sudo service {} stop'.format(VPP_SERVICE_NAME))
(ret, stdout, stderr) = \
ssh.exec_command('sudo service {} start'.format(VPP_SERVICE_NAME))
if ret != 0:
logger.debug('Restarting VPP failed on node {}'.
format(hostname))
logger.debug('stdout: {}'.format(stdout))
logger.debug('stderr: {}'.format(stderr))
raise RuntimeError('Restarting VPP failed on node {}'.
format(hostname))
# Sleep <waittime> seconds, up to <retry> times,
# and verify if VPP is running.
vpp_is_running = False
retries_left = retries
while (not vpp_is_running) and (retries_left > 0):
time.sleep(waittime)
retries_left -= 1
# FIXME: Need to find a good way to check if VPP is operational.
#
# If VatTerminal/VatExecutor is anything like vppctl or
# vpp_api_test, then in case VPP is NOT running it will block for
# 30 seconds or so and not even return if VPP becomes alive during
# that time. This makes it unsuitable in this case. We either need
# a call that returns immediately, indicating whether VPP is
# healthy or not, or a call that waits (up to a defined length
# of time) and returns immediately if VPP is or becomes healthy.
(ret, stdout, stderr) = \
ssh.exec_command('echo show hardware-interfaces | '
'nc 0 5002')
if ret == 0:
vpp_is_running = True
else:
logger.debug('VPP not yet running, {} retries left'.
format(retries_left))
if retries_left == 0:
raise RuntimeError('VPP failed to restart on node {}'.
format(hostname))
logger.debug('VPP interfaces found on node {}'.
format(stdout))
