def oscillator_nw(position_vector,
max_time=10.0,
fitness_option=6,
plot=False,
log_dis=False,
render=False,
monitor_path=None,
save_plot_path=None):
if log_dis:
log.infov(
'[OSC]-------------------------------------------------------------'
)
log.infov('[OSC] Run in multiprocessing({})'.format(os.getpid()))
log.infov('[OSC] Running oscillator_2.oscillator_nw')
log.info('[OSC] Printing chromosome')
log.info('[OSC] {0}'.format(position_vector))
log.info('[OSC] Started monitoring thread')
# Start the monitoring thread
env = gym.make('CellrobotEnv-v0')
# For plots - not needed now
if plot:
o1_list = list()
o2_list = list()
o3_list = list()
o4_list = list()
o5_list = list()
o6_list = list()
o7_list = list()
o8_list = list()
o9_list = list()
o10_list = list()
o11_list = list()
o12_list = list()
o13_list = list()
t_list = list()
CPG_controller = CPG_network(position_vector)
# Set monitor thread
monitor_thread = RobotMonitorThread(env, render, monitor_path=monitor_path)
# Set robot API
robot_handle = CRbot(
env,
monitor_thread,
sync_sleep_time=0.01,
interpolation=False,
fraction_max_speed=0.01,
wait=False,
)
# Note the current position
start_pos_x = monitor_thread.x
start_pos_y = monitor_thread.y
start_pos_z = monitor_thread.z
# Start the monitoring thread
monitor_thread.start()
# Set init angles
# robot_handle.set_angles_slow(target_angles=initial_bias_angles, duration=2.0, step=0.01)
# Sleep for 2 seconds to let any oscillations to die down
#time.sleep(2.0)
# Reset the timer of the monitor
monitor_thread.reset_timer()
# New variable for logging up time, since monitor thread is not accurate some times
up_t = 0.0
dt = 0.01
for t in np.arange(0.0, max_time, dt):
# Increment the up time variable
up_t = t
output_list = CPG_controller.output(state=None)
# Set the joint positions
current_angles = {
'cell0': output_list[1],
'cell1': output_list[2],
'cell2': output_list[3],
'cell3': output_list[4],
'cell4': output_list[5],
'cell5': output_list[6],
'cell6': output_list[7],
'cell7': output_list[8],
'cell8': output_list[9],
'cell9': output_list[10],
'cell10': output_list[11],
'cell11': output_list[12],
'cell12': output_list[13]
}
robot_handle.set_angles(current_angles)
time.sleep(dt)
# Check if the robot has fallen
if monitor_thread.fallen:
break
# For plots - not needed now
if plot:
o1_list.append(output_list[1])
o2_list.append(output_list[2])
o3_list.append(output_list[3])
o4_list.append(output_list[4])
o5_list.append(output_list[5])
o6_list.append(output_list[6])
o7_list.append(output_list[7])
o8_list.append(output_list[8])
o9_list.append(output_list[9])
o10_list.append(output_list[10])
o11_list.append(output_list[11])
o12_list.append(output_list[12])
o13_list.append(output_list[13])
t_list.append(t)
if log_dis:
log.info('[OSC] Accurate up time: {0}'.format(up_t))
# Outside the loop, it means that either the robot has fallen or the max_time has elapsed
# Find out the end position of the robot
end_pos_x = monitor_thread.x
end_pos_y = monitor_thread.y
end_pos_z = monitor_thread.z
# Find the average height
avg_z = monitor_thread.avg_z
# Find the up time
# up_time = monitor_thread.up_time
up_time = up_t
# Calculate the fitness
if up_time == 0.0:
fitness = 0.0
if log_dis:
log('[OSC] up_t==0 so fitness is set to 0.0')
else:
fitness = calc_fitness(start_x=start_pos_x,
start_y=start_pos_y,
start_z=start_pos_z,
end_x=end_pos_x,
end_y=end_pos_y,
end_z=end_pos_z,
avg_z=avg_z,
up_time=up_time,
fitness_option=fitness_option)
if log_dis:
if not monitor_thread.fallen:
log.info("[OSC] Robot has not fallen")
else:
log.info("[OSC] Robot has fallen")
log.info('[OSC] Calculated fitness: {0}'.format(fitness))
# Different from original script
# Fetch the values of the evaluation metrics
fallen = monitor_thread.fallen
up = up_time # Using a more accurate up time than monitor_thread.up_time,
x_distance = end_pos_x - start_pos_x
abs_y_deviation = end_pos_y
avg_footstep_x = None
var_torso_alpha = monitor_thread.obs[3]
var_torso_beta = monitor_thread.obs[4]
var_torso_gamma = monitor_thread.obs[5]
# Stop the monitoring thread
monitor_thread.stop()
# Close the VREP connection
robot_handle.cleanup()
# For plots - not needed now
if plot:
ax1 = plt.subplot(611)
plt.plot(t_list, o1_list, color='red', label='o_1')
plt.plot(t_list, o2_list, color='green', ls='--', label='o_2')
plt.plot(t_list, o3_list, color='green', label='o_3')
plt.grid()
plt.legend()
ax2 = plt.subplot(612, sharex=ax1, sharey=ax1)
plt.plot(t_list, o1_list, color='red', label='o_1')
plt.plot(t_list, o4_list, color='blue', ls='--', label='o_4')
plt.plot(t_list, o5_list, color='blue', label='o_5')
plt.grid()
plt.legend()
ax3 = plt.subplot(613, sharex=ax1, sharey=ax1)
plt.plot(t_list, o1_list, color='red', label='o_1')
plt.plot(t_list, o6_list, color='black', ls='--', label='o_6')
plt.plot(t_list, o7_list, color='black', label='o_7')
plt.grid()
plt.legend()
ax4 = plt.subplot(614, sharex=ax1, sharey=ax1)
plt.plot(t_list, o1_list, color='red', label='o_1')
plt.plot(t_list, o8_list, color='cyan', ls='--', label='o_8')
plt.plot(t_list, o9_list, color='cyan', label='o_9')
plt.grid()
plt.legend()
ax5 = plt.subplot(615, sharex=ax1, sharey=ax1)
plt.plot(t_list, o1_list, color='red', label='o_1')
plt.plot(t_list, o10_list, color='orange', ls='--', label='o_10')
plt.plot(t_list, o11_list, color='orange', label='o_11')
plt.grid()
plt.legend()
ax6 = plt.subplot(616, sharex=ax1, sharey=ax1)
plt.plot(t_list, o1_list, color='red', label='o_1')
plt.plot(t_list, o12_list, color='brown', ls='--', label='o_12')
plt.plot(t_list, o13_list, color='brown', label='o_13')
plt.grid()
plt.legend()
if save_plot_path is not None:
plt.savefig(save_plot_path)
else:
plt.show()
# Different from original script
# Return the evaluation metrics
return {
'fitness': fitness,
'fallen': fallen,
'up': up,
'x_distance': x_distance,
'abs_y_deviation': abs_y_deviation,
'avg_footstep_x': avg_footstep_x,
'var_torso_alpha': var_torso_alpha,
'var_torso_beta': var_torso_beta,
'var_torso_gamma': var_torso_gamma
}
def oscillator_nw(position_vector, max_time=10.0, fitness_option=6, plot = False, log_dis = False, render = False, monitor_path=None, save_plot_path = None):
if log_dis:
log.infov('[OSC]-------------------------------------------------------------')
log.infov('[OSC] Run in multiprocessing({})'.format(os.getpid()))
log.infov('[OSC] Running oscillator_2.oscillator_nw')
log.info('[OSC] Printing chromosome')
log.info('[OSC] {0}'.format(position_vector))
log.info('[OSC] Started monitoring thread')
# Start the monitoring thread
env = gym.make('CellrobotEnv-v0')
# Extract the elements from the position vector
kf = position_vector[0]
GAIN0 = position_vector[1]
GAIN1 = position_vector[2]
GAIN2 = position_vector[3]
GAIN3 = position_vector[4]
GAIN4 = position_vector[5]
GAIN5 = position_vector[6]
GAIN6 = position_vector[7]
GAIN7 = position_vector[8]
GAIN8 = position_vector[9]
GAIN9 = position_vector[10]
GAIN10 = position_vector[11]
GAIN11 = position_vector[12]
GAIN12 = position_vector[13]
BIAS0 = position_vector[14]
BIAS1 = position_vector[15]
BIAS2 = position_vector[16]
BIAS3 = position_vector[17]
BIAS4 = position_vector[18]
BIAS5 = position_vector[19]
BIAS6 = position_vector[20]
BIAS7 = position_vector[21]
BIAS8 = position_vector[22]
BIAS9 = position_vector[23]
BIAS10 = position_vector[24]
BIAS11 = position_vector[25]
BIAS12 = position_vector[26]
osillator = matsuoka_oscillator(kf)
osillator_fun = osillator.oscillator_fun
# Variables
# Oscillator 1 (pacemaker)
u1_1, u2_1, v1_1, v2_1, y1_1, y2_1, o_1, gain_1, bias_1 = 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0
# Oscillator 2 --cell0
u1_2, u2_2, v1_2, v2_2, y1_2, y2_2, o_2, gain_2, bias_2 = 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, GAIN0, BIAS0
# Oscillator 3 --cell1
u1_3, u2_3, v1_3, v2_3, y1_3, y2_3, o_3, gain_3, bias_3 = 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, GAIN1, BIAS1
# Oscillator 4 --cell2
u1_4, u2_4, v1_4, v2_4, y1_4, y2_4, o_4, gain_4, bias_4 = 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, GAIN2, BIAS2
# Oscillator 5 --cell3
u1_5, u2_5, v1_5, v2_5, y1_5, y2_5, o_5, gain_5, bias_5 = 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, GAIN3, BIAS3
# Oscillator 6 --cell4
u1_6, u2_6, v1_6, v2_6, y1_6, y2_6, o_6, gain_6, bias_6 = 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, GAIN4, BIAS4
# Oscillator 7 --cell5
u1_7, u2_7, v1_7, v2_7, y1_7, y2_7, o_7, gain_7, bias_7 = 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, GAIN5, BIAS5
# Oscillator 8 --cell6
u1_8, u2_8, v1_8, v2_8, y1_8, y2_8, o_8, gain_8, bias_8 = 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, GAIN6, BIAS6
# Oscillator 9 --cell7
u1_9, u2_9, v1_9, v2_9, y1_9, y2_9, o_9, gain_9, bias_9 = 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, GAIN7, BIAS7
# Oscillator 10 --cell8
u1_10, u2_10, v1_10, v2_10, y1_10, y2_10, o_10, gain_10, bias_10 = 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, GAIN8, BIAS8
# Oscillator 11 --cell9
u1_11, u2_11, v1_11, v2_11, y1_11, y2_11, o_11, gain_11, bias_11 = 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, GAIN9, BIAS9
# Oscillator 12 --cell10
u1_12, u2_12, v1_12, v2_12, y1_12, y2_12, o_12, gain_12, bias_12 = 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, GAIN10, BIAS10
# Oscillator 13 --cell11
u1_13, u2_13, v1_13, v2_13, y1_13, y2_13, o_13, gain_13, bias_13 = 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, GAIN11, BIAS11
# Oscillator 14 --cell12
u1_14, u2_14, v1_14, v2_14, y1_14, y2_14, o_14, gain_14, bias_14 = 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, GAIN12, BIAS12
# For plots - not needed now
if plot:
o1_list = list()
o2_list = list()
o3_list = list()
o4_list = list()
o5_list = list()
o6_list = list()
o7_list = list()
o8_list = list()
o9_list = list()
o10_list = list()
o11_list = list()
o12_list = list()
o13_list = list()
t_list = list()
# Set the joints to the initial bias positions - use slow angle setter
initial_bias_angles = {'cell0':BIAS0, 'cell1':BIAS1,'cell2':BIAS2,'cell3':BIAS3,'cell4':BIAS4,
'cell5':BIAS5, 'cell6':BIAS6,'cell7':BIAS7,'cell8':BIAS8,'cell9':BIAS9,
'cell10':BIAS10, 'cell11':BIAS11,'cell12':BIAS12
}
# Set monitor thread
monitor_thread = RobotMonitorThread(env, render, monitor_path=monitor_path)
# Set robot API
robot_handle = CRbot(env, monitor_thread, sync_sleep_time=0.01, interpolation=False, fraction_max_speed=0.01,
wait=False, )
# Note the current position
start_pos_x = monitor_thread.x
start_pos_y = monitor_thread.y
start_pos_z = monitor_thread.z
# Start the monitoring thread
monitor_thread.start()
# Set init angles
# robot_handle.set_angles_slow(target_angles=initial_bias_angles, duration=2.0, step=0.01)
# Sleep for 2 seconds to let any oscillations to die down
#time.sleep(2.0)
# Reset the timer of the monitor
monitor_thread.reset_timer()
# New variable for logging up time, since monitor thread is not accurate some times
up_t = 0.0
dt =0.01
for t in np.arange(0.0, max_time, dt):
# Increment the up time variable
up_t = t
#-----------------------------------------------------------------------------------------------------
# ---------------------------------------NETWORK START-----------------------------------------------
# -----------------------------------------------------------------------------------------------------
# Calculate next state of oscillator 1 (pacemaker)
f1_1, f2_1 = 0.0, 0.0
s1_1, s2_1 = 0.0, 0.0
u1_1, u2_1, v1_1, v2_1, y1_1, y2_1, o_1 = osillator_fun(u1=u1_1, u2=u2_1, v1=v1_1, v2=v2_1, y1=y1_1, y2=y2_1,
f1=f1_1, f2=f2_1, s1=s1_1, s2=s2_1,
bias=bias_1, gain=gain_1, )
# center
# Calculate next state of oscillator 2 --cell0
# w_ij -> j=1 (oscillator 1) is master, i=2 (oscillator 2) is slave
w_21 = 1.0
f1_2, f2_2 = 0.0, 0.0
s1_2, s2_2 = w_21 * u1_1, w_21 * u2_1
u1_2, u2_2, v1_2, v2_2, y1_2, y2_2, o_2 = osillator_fun(u1=u1_2, u2=u2_2, v1=v1_2, v2=v2_2, y1=y1_2, y2=y2_2,
f1=f1_2, f2=f2_2, s1=s1_2, s2=s2_2,
bias=bias_2, gain=gain_2)
# Left forward 1
# Calculate next state of oscillator 3 --cell1
# w_ij -> j=1 (oscillator 2) is master, i=3 (oscillator 3) is slave
w_32 = 1.0
f1_3, f2_3 = 0.0, 0.0
s1_3, s2_3 = w_32 * u1_1, w_32 * u2_1
u1_3, u2_3, v1_3, v2_3, y1_3, y2_3, o_3 = osillator_fun(u1=u1_3, u2=u2_3, v1=v1_3, v2=v2_3, y1=y1_3, y2=y2_3,
f1=f1_3, f2=f2_3, s1=s1_3, s2=s2_3,
bias=bias_3, gain=gain_3)
# Left back 1
# Calculate next state of oscillator 4 --cell2
# w_ij -> j=2 (oscillator 2) is master, i=4 (oscillator 4) is slave
w_42 = 1.0
f1_4, f2_4 = 0.0, 0.0
s1_4, s2_4 = w_42 * u1_2, w_42 * u2_2 # s1_i = w_ij*u1_j, s2_i = w_ij*u2_j
u1_4, u2_4, v1_4, v2_4, y1_4, y2_4, o_4 = osillator_fun(u1=u1_4, u2=u2_4, v1=v1_4, v2=v2_4, y1=y1_4, y2=y2_4,
f1=f1_4, f2=f2_4, s1=s1_4, s2=s2_4,
bias=bias_4, gain=gain_4)
# Right forward 1
# Calculate next state of oscillator 5 --cell3
# w_ij -> j=3 (oscillator 3) is master, i=5 (oscillator 5) is slave
w_52 = -1.0
f1_5, f2_5 = 0.0, 0.0
s1_5, s2_5 = w_52 * u1_3, w_52 * u2_3 # s1_i = w_ij*u1_j, s2_i = w_ij*u2_j
u1_5, u2_5, v1_5, v2_5, y1_5, y2_5, o_5 = osillator_fun(u1=u1_5, u2=u2_5, v1=v1_5, v2=v2_5, y1=y1_5, y2=y2_5,
f1=f1_5, f2=f2_5, s1=s1_5, s2=s2_5,
bias=bias_5, gain=gain_5)
# Right back1
# Calculate next state of oscillator 6 --cell4
# w_ij -> j=2 (oscillator 2) is master, i=6 (oscillator 6) is slave
w_62 = -1.0
f1_6, f2_6 = 0.0, 0.0
s1_6, s2_6 = w_62 * u1_2, w_62 * u2_2 # s1_i = w_ij*u1_j, s2_i = w_ij*u2_j
u1_6, u2_6, v1_6, v2_6, y1_6, y2_6, o_6 = osillator_fun(u1=u1_6, u2=u2_6, v1=v1_6, v2=v2_6, y1=y1_6, y2=y2_6,
f1=f1_6, f2=f2_6, s1=s1_6, s2=s2_6,
bias=bias_6, gain=gain_6)
# Left forward 2
# Calculate next state of oscillator 7 --cell5
# w_ij -> j=3 (oscillator 3) is master, i=7 (oscillator 7) is slave
w_73 = -1.0
f1_7, f2_7 = 0.0, 0.0
s1_7, s2_7 = w_73 * u1_3, w_73 * u2_3 # s1_i = w_ij*u1_j, s2_i = w_ij*u2_j
u1_7, u2_7, v1_7, v2_7, y1_7, y2_7, o_7 = osillator_fun(u1=u1_7, u2=u2_7, v1=v1_7, v2=v2_7, y1=y1_7, y2=y2_7,
f1=f1_7, f2=f2_7, s1=s1_7, s2=s2_7,
bias=bias_7, gain=gain_7)
# Left foward 3
# Calculate next state of oscillator 8 --cell6
# w_ij -> j=1 (oscillator 3) is master, i=8 (oscillator 8) is slave
w_83 = -1.0
f1_8, f2_8 = 0.0, 0.0
s1_8, s2_8 = w_83 * u1_1, w_83 * u2_1 # s1_i = w_ij*u1_j, s2_i = w_ij*u2_j
u1_8, u2_8, v1_8, v2_8, y1_8, y2_8, o_8 = osillator_fun(u1=u1_8, u2=u2_8, v1=v1_8, v2=v2_8, y1=y1_8, y2=y2_8,
f1=f1_8, f2=f2_8, s1=s1_8, s2=s2_8,
bias=bias_8, gain=gain_8)
# Left back 2
# Calculate next state of oscillator 9 --cell7
# w_ij -> j=8 (oscillator 4) is master, i=9 (oscillator 9) is slave
w_94 = -1.0
f1_9, f2_9 = 0.0, 0.0
s1_9, s2_9 = w_94 * u1_8, w_94 * u2_8 # s1_i = w_ij*u1_j, s2_i = w_ij*u2_j
u1_9, u2_9, v1_9, v2_9, y1_9, y2_9, o_9 = osillator_fun(u1=u1_9, u2=u2_9, v1=v1_9, v2=v2_9, y1=y1_9, y2=y2_9,
f1=f1_9, f2=f2_9, s1=s1_9, s2=s2_9,
bias=bias_9, gain=gain_9)
# Left back 3
# Calculate next state of oscillator 10 --cell8
# w_ij -> j=1 (oscillator 4) is master, i=10 (oscillator 10) is slave
w_104 = -1.0
f1_10, f2_10 = 0.0, 0.0
s1_10, s2_10 = w_104 * u1_1, w_104 * u2_1 # s1_i = w_ij*u1_j, s2_i = w_ij*u2_j
u1_10, u2_10, v1_10, v2_10, y1_10, y2_10, o_10 = osillator_fun(u1=u1_10, u2=u2_10, v1=v1_10, v2=v2_10, y1=y1_10,
y2=y2_10,
f1=f1_10, f2=f2_10, s1=s1_10, s2=s2_10,
bias=bias_10, gain=gain_10)
# Right forward 2
# Calculate next state of oscillator 11 --cell9
# w_ij -> j=10 (oscillator 5) is master, i=11 (oscillator 11) is slave
w_115 = -1.0
f1_11, f2_11 = 0.0, 0.0
s1_11, s2_11 = w_115 * u1_10, w_115 * u2_10 # s1_i = w_ij*u1_j, s2_i = w_ij*u2_j
u1_11, u2_11, v1_11, v2_11, y1_11, y2_11, o_11 = osillator_fun(u1=u1_11, u2=u2_11, v1=v1_11, v2=v2_11, y1=y1_11,
y2=y2_11,
f1=f1_11, f2=f2_11, s1=s1_11, s2=s2_11,
bias=bias_11, gain=gain_11)
# Right forward 3
# Calculate next state of oscillator 12 --cell10
# w_ij -> j=1 (oscillator 5) is master, i=12 (oscillator 12) is slave
w_125 = -1.0
f1_12, f2_12 = 0.0, 0.0
s1_12, s2_12 = w_125 * u1_1, w_125 * u2_1 # s1_i = w_ij*u1_j, s2_i = w_ij*u2_j
u1_12, u2_12, v1_12, v2_12, y1_12, y2_12, o_12 = osillator_fun(u1=u1_12, u2=u2_12, v1=v1_12, v2=v2_12, y1=y1_12,
y2=y2_12,
f1=f1_12, f2=f2_12, s1=s1_12, s2=s2_12,
bias=bias_12, gain=gain_12)
# Right back 2
# Calculate next state of oscillator 13 --cell11
# w_ij -> j=1 (oscillator 6) is master, i=13 (oscillator 13) is slave
w_136 = -1.0
f1_13, f2_13 = 0.0, 0.0
s1_13, s2_13 = w_136 * u1_1, w_136 * u2_1 # s1_i = w_ij*u1_j, s2_i = w_ij*u2_j
u1_13, u2_13, v1_13, v2_13, y1_13, y2_13, o_13 = osillator_fun(u1=u1_13, u2=u2_13, v1=v1_13, v2=v2_13, y1=y1_13,
y2=y2_13,
f1=f1_13, f2=f2_13, s1=s1_13, s2=s2_13,
bias=bias_13, gain=gain_13)
# Right back 3
# Calculate next state of oscillator 14 --cell11
# w_ij -> j=1 (oscillator 6) is master, i=14 (oscillator 14) is slave
w_146 = -1.0
f1_14, f2_14 = 0.0, 0.0
s1_14, s2_14 = w_146 * u1_1, w_146 * u2_1 # s1_i = w_ij*u1_j, s2_i = w_ij*u2_j
u1_14, u2_14, v1_14, v2_14, y1_14, y2_14, o_14 = osillator_fun(u1=u1_14, u2=u2_14, v1=v1_14, v2=v2_14, y1=y1_14,
y2=y2_14,
f1=f1_14, f2=f2_14, s1=s1_14, s2=s2_14,
bias=bias_14, gain=gain_14)
# -----------------------------------------------------------------------------------------------------
# ---------------------------------------NETWORK END--------------------------------------------------
# -----------------------------------------------------------------------------------------------------
# Set the joint positions
current_angles = {'cell0':o_2, 'cell1':o_3,'cell2':o_4,'cell3':o_5,'cell4':o_6,
'cell5':o_7, 'cell6':o_8,'cell7':o_9,'cell8':o_10,'cell9':o_11,
'cell10':o_12, 'cell11':o_13,'cell12':o_14
}
robot_handle.set_angles(current_angles)
time.sleep(dt)
# Check if the robot has fallen
if monitor_thread.fallen:
break
# For plots - not needed now
if plot:
o1_list.append(o_1)
o2_list.append(o_2)
o3_list.append(o_3)
o4_list.append(o_4)
o5_list.append(o_5)
o6_list.append(o_6)
o7_list.append(o_7)
o8_list.append(o_8)
o9_list.append(o_9)
o10_list.append(o_10)
o11_list.append(o_11)
o12_list.append(o_12)
o13_list.append(o_13)
t_list.append(t)
if log_dis:
log.info('[OSC] Accurate up time: {0}'.format(up_t))
# Outside the loop, it means that either the robot has fallen or the max_time has elapsed
# Find out the end position of the robot
end_pos_x = monitor_thread.x
end_pos_y = monitor_thread.y
end_pos_z = monitor_thread.z
# Find the average height
avg_z = monitor_thread.avg_z
# Find the up time
# up_time = monitor_thread.up_time
up_time = up_t
# Calculate the fitness
if up_time == 0.0:
fitness = 0.0
if log_dis:
log('[OSC] up_t==0 so fitness is set to 0.0')
else:
fitness = calc_fitness(start_x=start_pos_x, start_y=start_pos_y, start_z=start_pos_z,
end_x=end_pos_x, end_y=end_pos_y, end_z=end_pos_z,
avg_z=avg_z,
up_time=up_time,
fitness_option=fitness_option
)
if log_dis:
if not monitor_thread.fallen:
log.info("[OSC] Robot has not fallen")
else:
log.info("[OSC] Robot has fallen")
log.info('[OSC] Calculated fitness: {0}'.format(fitness))
# Different from original script
# Fetch the values of the evaluation metrics
fallen = monitor_thread.fallen
up = up_time # Using a more accurate up time than monitor_thread.up_time,
x_distance = end_pos_x - start_pos_x
abs_y_deviation = end_pos_y
avg_footstep_x = None
var_torso_alpha = monitor_thread.obs[3]
var_torso_beta = monitor_thread.obs[4]
var_torso_gamma = monitor_thread.obs[5]
# Stop the monitoring thread
monitor_thread.stop()
# Close the VREP connection
robot_handle.cleanup()
# For plots - not needed now
if plot:
ax1 = plt.subplot(611)
plt.plot(t_list, o1_list, color='red', label='o_1')
plt.plot(t_list, o2_list, color='green', ls='--', label='o_2')
plt.plot(t_list, o3_list, color='green', label='o_3')
plt.grid()
plt.legend()
ax2 = plt.subplot(612, sharex=ax1, sharey=ax1)
plt.plot(t_list, o1_list, color='red', label='o_1')
plt.plot(t_list, o4_list, color='blue', ls='--', label='o_4')
plt.plot(t_list, o5_list, color='blue', label='o_5')
plt.grid()
plt.legend()
ax3 = plt.subplot(613, sharex=ax1, sharey=ax1)
plt.plot(t_list, o1_list, color='red', label='o_1')
plt.plot(t_list, o6_list, color='black', ls='--', label='o_6')
plt.plot(t_list, o7_list, color='black', label='o_7')
plt.grid()
plt.legend()
ax4 = plt.subplot(614, sharex=ax1, sharey=ax1)
plt.plot(t_list, o1_list, color='red', label='o_1')
plt.plot(t_list, o8_list, color='cyan', ls='--', label='o_8')
plt.plot(t_list, o9_list, color='cyan', label='o_9')
plt.grid()
plt.legend()
ax5 = plt.subplot(615, sharex=ax1, sharey=ax1)
plt.plot(t_list, o1_list, color='red', label='o_1')
plt.plot(t_list, o10_list, color='orange', ls='--', label='o_10')
plt.plot(t_list, o11_list, color='orange', label='o_11')
plt.grid()
plt.legend()
ax6 = plt.subplot(616, sharex=ax1, sharey=ax1)
plt.plot(t_list, o1_list, color='red', label='o_1')
plt.plot(t_list, o12_list, color='brown', ls='--', label='o_12')
plt.plot(t_list, o13_list, color='brown', label='o_13')
plt.grid()
plt.legend()
if save_plot_path is not None:
plt.savefig(save_plot_path)
else:
plt.show()
# Different from original script
# Return the evaluation metrics
return {'fitness': fitness,
'fallen': fallen,
'up': up,
'x_distance': x_distance,
'abs_y_deviation': abs_y_deviation,
'avg_footstep_x': avg_footstep_x,
'var_torso_alpha': var_torso_alpha,
'var_torso_beta': var_torso_beta,
'var_torso_gamma': var_torso_gamma}