def build(self, td_matrix, alpha, beta, n_topics, save_model=False):
"""
run Sampler and update p(z|w) and p(w|z)
"""
print('build model')
self._initialize()
sampler = Sampler(n_topics=n_topics, alpha=alpha, beta=beta)
# extract 1. phi 2. nmz 3. nzw from sampler every iteration(sampling)
# phi_nmz_nzw = (phi , nmz, nzw) generator return a tuple for multiple values
for i, phi_pzw in enumerate(
sampler.run(matrix=td_matrix, maxiter=self.maxiter)):
like = sampler.loglikelihood()
self.likelihood_in_iters[i] = like
# update best maximum likelihood and optimal phi = p(w| z)
if like > self.maxlike:
self.maxlike = like
self.opt_iter = i
self.opt_phi = phi_pzw[0]
self.opt_pzw = phi_pzw[1]
if save_model is True:
self._save_lda_model()
def _init_al_dataset(self):
""" Initialises dataset for active learning
"""
self._init_dataset()
train_dataset = self.datasets['train']
dataset_size = len(train_dataset)
self.budget = math.ceil(self.budget_frac * dataset_size)
Sampler.__init__(self, config,
self.budget) # TODO: Weird place to initialise this
all_indices = set(np.arange(dataset_size))
k_initial = math.ceil(len(all_indices) * self.initial_budget_frac)
initial_indices = random.sample(list(all_indices), k=k_initial)
sampler_init = data.sampler.SubsetRandomSampler(
initial_indices) # need to sample from training dataset
self.labelled_dataloader = data.DataLoader(train_dataset,
sampler=sampler_init,
batch_size=self.batch_size,
drop_last=True)
self.val_dataloader = data.DataLoader(self.datasets['valid'],
batch_size=self.batch_size,
drop_last=False)
self.test_dataloader = data.DataLoader(self.datasets['test'],
batch_size=self.batch_size,
drop_last=False)
return all_indices, initial_indices
def main3():
file = Path('./0000002.png')
img = plt.imread(file)
img = torch.tensor(img)
img = img.unsqueeze(dim=0)
img = img.unsqueeze(dim=0)
img2 = torch.ones(4, 1, 128, 192)
sam = Sampler(batch=1, channels=1, height=128, width=192, scales=6)
scale_list = sam.down_resolution_sampling([img])
#ims show
nps = []
for i in range(len(scale_list)):
nps.append(scale_list[i].data.numpy())
plt.subplot(2, 3, 1)
plt.imshow(scale_list[0][0][0])
plt.subplot(2, 3, 2)
plt.imshow(scale_list[1][0][0])
plt.subplot(2, 3, 3)
plt.imshow(scale_list[2][0][0])
plt.subplot(2, 3, 4)
plt.imshow(scale_list[3][0][0])
plt.subplot(2, 3, 5)
plt.imshow(scale_list[4][0][0])
plt.subplot(2, 3, 6)
plt.imshow(scale_list[5][0][0])
plt.show()
print('ok')
def grow_capacity(self, n):
new_sampler = Sampler(self.max_size + n, self.max_size + n, 1)
for item, count in self.items():
item_id = self.item2id[item]
new_sampler.add(item_id, count)
self.sampler = new_sampler
self.max_size += n
def main():
ValidSampler = Sampler(utils.valid_file)
TestSampler = Sampler(utils.test_file)
networks = []
weights = []
for i in xrange(5):
if i == 0:
TrainSampler = Sampler(utils.train_file)
prev_ys = np.copy(TrainSampler.labels)
else:
TrainSampler = Sampler(utils.train_file, prev_ys)
network = Network()
network.train(TrainSampler)
cur_ys = network.predict(TrainSampler)
b1 = np.sum(np.multiply(cur_ys, prev_ys))
b2 = np.sum(np.multiply(cur_ys, cur_ys))
w = float(b1) / b2
prev_ys = np.subtract(prev_ys, w * cur_ys)
print i, 'done with weight', w
network.save('network_' + str(i) + '.ckpt')
weights.append(w)
networks.append(network)
validate_boost(ValidSampler, networks, weights)
validate_boost(TestSampler, networks, weights)
np.save('weights.npy', weights)
def __init__(self, kick=KICK, snare=SNARE, tom1=TOM1, tom2=TOM2, hihat=HIHAT, crash=CRASH, ride=RIDE):
self.kick_file = kick
self.snare_file = snare
self.tom1_file = tom1
self.tom2_file = tom2
self.hihat_file = hihat
self.crash_file = crash
self.ride_file = ride
drumset_files = [
self.kick_file,
self.snare_file,
self.tom1_file,
self.tom2_file,
self.hihat_file,
self.crash_file,
self.ride_file,
]
Sampler.__init__(self, drumset_files)
self.kick = self[0]
self.snare = self[1]
self.tom1 = self[2]
self.tom2 = self[3]
self.hihat = self[4]
self.crash = self[5]
self.ride = self[6]
def __init__(self, N):
self.item2id = {}
self.id2item = []
self.item_count = Counter()
self.max_size = N
self.sampler = Sampler(N, N, 1)
self.count = 0
def _init_al_data(self):
""" Initialises train, validation and test sets for active learning including partitions """
self._init_dataset()
train_dataset = self.datasets['train']
dataset_size = len(train_dataset)
self.budget = math.ceil(
self.budget_frac *
dataset_size) # currently can only have a fixed budget size
Sampler.__init__(self, self.budget)
all_indices = set(np.arange(dataset_size))
k_initial = math.ceil(len(all_indices) * self.initial_budget_frac)
initial_indices = random.sample(list(all_indices), k=k_initial)
sampler_init = data.sampler.SubsetRandomSampler(
initial_indices) # need to sample from training dataset
self.labelled_dataloader = data.DataLoader(train_dataset,
sampler=sampler_init,
batch_size=self.batch_size,
drop_last=True)
self.val_dataloader = data.DataLoader(self.datasets['valid'],
batch_size=self.batch_size,
shuffle=True,
drop_last=False)
self.test_dataloader = data.DataLoader(self.datasets['test'],
batch_size=self.batch_size,
shuffle=True,
drop_last=False)
print(
f'{datetime.now()}: Dataloaders sizes: Train {len(self.labelled_dataloader)} Valid {len(self.val_dataloader)} Test {len(self.test_dataloader)}'
)
return all_indices, initial_indices
def build_graph():
session = tf.Session()
optimizer = tf.train.AdamOptimizer(learning_rate=0.01)
writer = tf.summary.FileWriter("/home/drl/DRL/tensorflow-reinforce/tmp/")
# Policy parameters for the exploration policy
epsilon = 0.9
target_update_rate = 0.1
dqn_agent = DQNAgent(session,
optimizer,
q_network,
state_dim,
num_actions,
target_update_rate=target_update_rate,
summary_writer=writer)
# Switch between greedy and exploratory policy
exploration_policy = EpsilonGreedyPolicy(dqn_agent, num_actions, epsilon)
# Always take greedy actions according to greedy policy
greedy_policy = EpsilonGreedyPolicy(dqn_agent, num_actions, 1.0)
# Sampler (collect trajectories using the present dqn agent)
num_episodes = 10
training_sampler = Sampler(exploration_policy,
env,
num_episodes=num_episodes)
testing_sampler = Sampler(greedy_policy, env, num_episodes=5)
# Initializing ReplayBuffer
buffer_size = 100000
replay_buffer = ReplayBuffer(buffer_size)
return dqn_agent, training_sampler, testing_sampler, replay_buffer
def run_vmc(parameter):
"""Run the variational monte carlo."""
# Set all values to zero for each new Monte Carlo run
accumulate_energy = 0.0
accumulate_psi_term = 0.0
accumulate_both = 0.0
new_energy = 0.0
# Initialize the posistions for each new Monte Carlo run
positions = np.random.rand(num_particles, num_dimensions)
# Call system class in order to set new alpha parameter
sys = System(num_particles, num_dimensions, parameter, beta, a)
sam = Sampler(omega, numerical_step_length, sys)
met = Metropolis(step_metropolis, step_importance, num_particles,
num_dimensions, sam, 0.0)
for i in range(monte_carlo_cycles):
new_energy, new_positions, count = met.metropolis(positions)
positions = new_positions
accumulate_energy += sam.local_energy(positions)
accumulate_psi_term += sys.derivative_psi_term(positions)
accumulate_both += sam.local_energy_times_wf(positions)
expec_val_energy = accumulate_energy / (monte_carlo_cycles * num_particles)
expec_val_psi = accumulate_psi_term / (monte_carlo_cycles * num_particles)
expec_val_both = accumulate_both / (monte_carlo_cycles * num_particles)
derivative_energy = 2 * (expec_val_both - expec_val_psi * expec_val_energy)
print('deri energy = ', derivative_energy)
print('counter (accepted moves in metropolis) = ', count)
return derivative_energy, new_energy
def main():
config = get_config()
if config.mode == 'train':
torch.backends.cudnn.benchmark = True
dataLoader = DataLoader(config.data_root, config.dataset_name, config.img_size, config.img_type, config.batch_size)
loader, n_classes = dataLoader.get_loader()
config.n_classes = n_classes
print(config)
trainer = Trainer(loader, config)
trainer.train()
elif config.mode == 'sample':
if config.config_path == '':
raise Exception
with open(config.config_path) as f:
config_dict = json.load(f)
for k, v in config_dict.items():
if not k == 'model_state_path':
setattr(config, k, v)
dataLoader = DataLoader(config.data_root, config.dataset_name, config.img_size, config.img_type, config.batch_size)
loader, n_classes = dataLoader.get_loader()
config.n_classes = n_classes
print(config)
sampler = Sampler(config)
sampler.sample()
def convert_with_processes(file_path, duration=30.0, half_part_length=0.1,
offset = 30, num_processes=multiprocessing.cpu_count()):
global song
song = Sampler(file_path, duration=duration, offset = offset)
task_queue = multiprocessing.JoinableQueue()
results = multiprocessing.Queue()
parts = song.split(half_part_length)
part_arr = [np.append(parts[i-1], parts[i]) for i in xrange(1, len(parts))]
for element in part_arr:
task_queue.put(element)
for _ in xrange(num_processes):
task_queue.put(None)
tasks = []
for _ in xrange(num_processes):
process = QueueProcess(task_queue, results, take_feature)
tasks.append(process)
process.start()
task_queue.join()
result_array = []
for i in xrange(len(part_arr)):
result_array.append(results.get())
result_array = np.asarray(result_array)
return result_array
def test(task,
num_episodes=10,
policy_network_hidden_sizes=(32, 32),
policy_adaptive_std=False):
directory = 'log/{}/'.format(task)
simulator = Simulator(task=task)
input_shape = (None, simulator.obsevation_dim)
output_size = simulator.action_dim
if simulator.action_type == 'continuous':
policy_network = GaussianMLPPolicy(
input_shape=input_shape,
output_size=output_size,
hidden_sizes=policy_network_hidden_sizes,
adaptive_std=policy_adaptive_std,
std_hidden_sizes=policy_network_hidden_sizes)
elif simulator.action_type == 'discrete':
policy_network = CategoricalMLPPolicy(
input_shape=input_shape,
output_size=output_size,
hidden_sizes=policy_network_hidden_sizes)
sampler = Sampler(simulator, policy_network)
with tf.Session() as sess:
saver = tf.train.Saver()
checkpoint_path = os.path.join(directory, '{}.ckpt'.format(task))
saver.restore(sess, checkpoint_path)
for i in range(num_episodes):
path = sampler.rollout(sess, max_path_length=1000, render=True)
print("epsiode {}, reward {}".format(i, path['total_reward']))
def prm(data, num_samples=1000, extra_points=[]):
sampler = Sampler(data)
nodes = sampler.sample(num_samples=num_samples)
print('# sampled nodes {}'.format(len(nodes)))
nodes += extra_points
return create_graph(nodes, sampler.polygons), nodes
def _run_module(self, graph_part):
spl = Sampler(graph_part, 0)
cell, graph, table = spl.sample()
# pred = Predictor()
# ops = pred.predictor([], graph_part)
# table_ops = spl.ops2table(ops, table)
# return cell, graph, table, table_ops
return cell, graph, table
def build_caption_from_sampler(filename):
saved_model = get_saved_model("checkpoint_2_7369.pt")
model = Sampler(saved_model, vocab)
seq, alpha = model.beam_search(filename)
caption = ""
for i in seq[1:-1]:
caption += " " + vocab_idx2word[str(i)]
return caption, seq, alpha
def setupSampler(self):
self.samplerThread = QtCore.QThread(self)
self.sampler = Sampler(self.gain, self.sampRate, self.freqs, self.numSamples)
self.sampler.moveToThread(self.samplerThread)
self.samplerThread.started.connect(self.sampler.sampling)
self.sampler.samplerError.connect(self.onError)
self.sampler.dataAcquired.connect(self.worker.work)
self.samplerThread.start(QtCore.QThread.NormalPriority)
def setupSampler(self):
self.samplerThread = QtCore.QThread(self)
self.sampler = Sampler(self.gain, self.samp_rate, self.freqs,
self.num_samples, self.q_in)
self.sampler.moveToThread(self.samplerThread)
self.samplerThread.started.connect(self.sampler.sampling)
self.sampler.abortStart.connect(self.onAbort)
self.ui.gainSlider.valueChanged[int].connect(self.setGain)
#self.ui.gainSlider.valueChanged[int].connect(self.sampler.changeGain, QtCore.Qt.QueuedConnection)
self.samplerThread.start(QtCore.QThread.NormalPriority)
def __init__(self, fwd_model, n_iterations, population_size, elite_frac,
ang_sigma, len_sigma, smoothing_param):
self.fwd_model = fwd_model
self.n_iterations = n_iterations
self.population_size = population_size
self.elite_frac = elite_frac
self.num_elites = int(population_size * elite_frac)
self.smoothing_param = smoothing_param
self.sampler = Sampler(ang_sigma=ang_sigma,
len_sigma=len_sigma,
population_size=population_size)
def test_sampler(self):
sample_time = 2
sleep_time = 0.10
start = datetime.datetime.now()
sampler = Sampler( SDS011(True) , sample_time = sample_time , sleep_time = sleep_time )
data = sampler.collect( )
stop = datetime.datetime.now( )
dt = stop - start
self.assertTrue( (dt.total_seconds() - sample_time) > 0)
def random_test(nn=NetworkUnit()):
"""Fix a network structure, give a setting randomly and get its score"""
spl = Sampler()
eva = Evaluater()
spl.renewp(CONFIG_RAND_VECTOR)
scores = []
for i in range(TEST_MAX_EPOCH):
nn.set_cell(spl.sample(len(nn.graph_part)))
score = eva.evaluate(nn)
scores.append(score)
return scores
def test_sampler(self):
sample_time = 2
sleep_time = 0.10
start = datetime.datetime.now()
sampler = Sampler(SDS011(True),
sample_time=sample_time,
sleep_time=sleep_time)
data = sampler.collect()
stop = datetime.datetime.now()
dt = stop - start
self.assertTrue((dt.total_seconds() - sample_time) > 0)
def __init__(self, monte_carlo_steps, delta_R, delta_t, num_particles,
num_dimensions, wavefunction, hamiltonian):
"""Instance of class."""
self.mc_cycles = monte_carlo_steps
self.delta_R = delta_R
self.delta_t = delta_t
self.num_p = num_particles
self.num_d = num_dimensions
self.w = wavefunction
self.h = hamiltonian
self.c = 0.0
self.s = Sampler(self.w, self.h)
self.sqrt_delta_t = np.sqrt(self.delta_t)
def window(self):
"""
Window for user to interact with
"""
pygame.init()
screen = pygame.display.set_mode(TextColorChooser.screen_size)
pygame.display.set_caption('Input data')
sampler = Sampler(self.map_size)
# Generate first 10 values
try:
self.input_data = [
self.show_buttons(screen,
(sampler.sample(enable_iterator=False)))
for _ in range(10)
] # Generate baseline
except Exception as e:
print(e)
return []
predictor = Predictor(self.input_data)
accuracy_tracker = AccuracyTracker()
# Continuously get values
while True:
current_bg = (sampler.sample(enable_iterator=False))
predictor.data = self.input_data
prediction = predictor.predict(list(current_bg))
print("Prediction: {}".format('White' if prediction ==
'w' else 'Black'))
screen.fill([0, 0, 0] if prediction == 'b' else [255, 255, 255])
try:
self.input_data.append(self.show_buttons(screen, current_bg))
except Exception as e:
print(e)
break
accuracy_tracker += (prediction == self.input_data[-1][1])
print(str(accuracy_tracker.accuracy) +
'%') # Show past 20 accuracy
pygame.quit()
def __init__(self, args):
self.args = args
self.model = Model()
try: # test: load model
if args.test:
self.model.load_model(args.model)
except: # train: init corpus and model
self.corpus = Corpus()
self.model.init_model(args)
if args.rule:
self.model.load_rules(args.rule)
self.corpus.init_corpus_and_model(args.train, self.model)
# init sampler
self.sampler = Sampler(self.model)
def __init__(self, cmd_args, flag):
self.args = cmd_args
self.model = Model()
# test: load model
if flag=='infer':
self.model.load_model(cmd_args.model)
else: # train: init corpus and model
self.corpus = Corpus()
self.model.init_model(cmd_args)
if cmd_args.rule:
self.model.load_rules(cmd_args.rule)
self.corpus.init_corpus_and_model(cmd_args.train, self.model)
# init sampler
self.sampler = Sampler(self.model)
def run():
my_preprocessor = Preprocessor('stop_words.txt')
my_sampler = Sampler()
my_represent = Represent()
a_data = Data('../data/chat.txt')
a_data.prepare_search(my_preprocessor, my_sampler, my_represent)
def macro_sampler():
seed = '12345678901234567890abcdefghijklmnopqrstuvwxyz😊'
risk_limit = .1
contests = {
'test1': {
'cand1': 600,
'cand2': 400,
'ballots': 1000,
'numWinners': 1
},
}
batches = {}
# 10 batches will have max error of .08
for i in range(10):
batches['pct {}'.format(i)] = {
'test1': {
'cand1': 40,
'cand2': 10,
'ballots': 50
}
}
# 10 batches will have max error of .04
for i in range(11, 20):
batches['pct {}'.format(i)] = {
'test1': {
'cand1': 20,
'cand2': 30,
'ballots': 50
}
}
yield Sampler('MACRO', seed, risk_limit, contests, batches)
def main():
# number or tasks or quadrants
ntasks = 2
dim = 4
data = Sampler(alpha=1.0,
verbose=True,
ntasks=ntasks,
dim=dim,
discriminator_offset=0.05,
distribution_offset=0.5,
uniform_width=1.,
nsamples=1000000,
ntrain=10000,
ntest=200)
learning_object = Task_free_continual_learning(
verbose=True,
seed=123,
dev='cpu',
dim=dim,
hidden_units=100,
learning_rate=0.005,
ntasks=ntasks,
gradient_steps=5,
loss_window_length=5,
loss_window_mean_threshold=0.2,
loss_window_variance_threshold=0.1,
MAS_weight=0.5,
recent_buffer_size=20,
hard_buffer_size=5)
tags = ['Online No Hardbuffer', 'Online Continual']
experiment(data, learning_object, tags)
def build_samplers(im_path, feat_path, label_path, seed=0):
ims_fname = sorted(glob.glob(os.path.join(im_path, '*.png')))
feats_fname = sorted(glob.glob(os.path.join(feat_path, '*.npz')))
labels_fname = sorted(glob.glob(os.path.join(label_path, '*.txt')))
# shuffle
if seed is not None:
np.random.seed(seed)
idx = np.arange(len(ims_fname))
np.random.shuffle(idx)
ims_fname = [ims_fname[i] for i in idx]
feats_fname = [feats_fname[i] for i in idx]
labels_fname = [labels_fname[i] for i in idx]
samplers = []
print('Loading data and building samplers')
pbar = tqdm(total=len(feats_fname))
for i, l, f in zip(ims_fname, labels_fname, feats_fname):
labels = read_labels(l)
xy, descs = read_feats(f)
sampler = Sampler(labels, xy, descs, im_path=i)
samplers.append(sampler)
pbar.update(1)
pbar.close()
return samplers
def setup_tables(self, tables, merged):
self.merged_table = merged
self.tables = tables
for ef, t in zip(self.err_funcs, self.tables):
ef.setup(t)
self.sampler = Sampler(self.SCORE_ID)
self.samp_rates = [
best_sample_size(len(t), self.epsilon) / (float(len(t)) + 1)
for t in self.tables
]
if self.inf_bounds is None:
self.inf_bounds = [[INF, -INF] for table in tables]
# attributes to partition upon
self.cont_attrs = [
attr.name for attr in merged.domain if attr.name in self.cols
and attr.var_type != Orange.feature.Type.Discrete
]
self.dist_attrs = [
attr.name for attr in merged.domain if attr.name in self.cols
and attr.var_type == Orange.feature.Type.Discrete
]
# remove undesirable columns
self.cont_attrs = filter(lambda c: c in self.cols, self.cont_attrs)
self.dist_attrs = filter(lambda c: c in self.cols, self.dist_attrs)
def max_balancer(input_csv_path, output_csv_path='./output.csv'):
dataset = csv_handler.csv_readlines(input_csv_path)
pos_dataset = transform.filter_func(dataset, lambda row: row[2] == '1')
neg_dataset = transform.filter_func(dataset, lambda row: row[2] == '0')
assert (len(pos_dataset) <= len(neg_dataset))
sampler = Sampler()
neg_dataset = sampler.sample_rows(neg_dataset, len(pos_dataset))
pos_ids = transform.map_func(pos_dataset, lambda row: row[0])
neg_ids = transform.map_func(neg_dataset, lambda row: row[0])
select_id_set = set(pos_ids + neg_ids)
final = transform.filter_func(dataset, lambda row: row[0] in select_id_set)
csv_handler.csv_writelines(output_csv_path, final)
def __init__(self, address="[::]", port=50051):
self._address = address
self._port = port
self._server = grpc.server(futures.ThreadPoolExecutor(max_workers=10))
service_camera_sampler_pb2_grpc.add_CameraSamplerServicer_to_server(
Sampler(), self._server)
self._server.add_insecure_port(f"{self._address}:{self._port}")
class MDSim:
def __init__(self, numpyart, rho, temp, force, stepsize=0.001):
"""Initializes the various parts of an MD simulation.
Parameters:
numpyart: Number of particles
rho : Density
temp : Temperature
force: A force model
stepsize: Time step
"""
self.geometry = CubicLattice( numpyart, rho ) # Initialize a geometry,
# in this case a cubic lattice.
self.system = Ensemble( self.geometry, temp ) # Create an ensemble to
# store information about
# the simulation.
self.solver = VeloVerlet( self.system, force, stepsize ) # Create the sampler class.
self.sampler = Sampler()
def run( self, nsteps, tSet):
"""Simulates N steps of the simulation."""
# Equilibration Run.
print "equilibrating %i steps" % (nsteps/2)
for n in range(0,nsteps/2,2):
self.solver.step()
if( n % 1000 == 0 ):
#self.system.setT(tSet)
print "step = %05i, temp = %12.7f" % (n, self.system.getT())
print "Equilibration done."
# Production Run.
for n in range(nsteps/2, nsteps+1):
# sample every 100 steps but only after nsteps / 2 equilibration steps
if( n % fil == 0 and n > nsteps / 2 ):
U = copy.deepcopy(self.system.getPos())
#Sampling
self.sampler.sampleData( U[0], U[1], U[2],
self.system.getEpot(),
self.system.getEkin(),
self.system.getT(),
self.system.getP(),
copy.deepcopy(self.system.getVel()) )
# print every 500 steps
if( n % 1000 == 0 ):
print "step = %05i, temp = %12.7f" % (n, self.system.getT())
self.solver.step() # take a simulation step
def setupSampler(self):
self.samplerThread = QtCore.QThread(self)
self.sampler = Sampler(self.gain, self.samp_rate, self.freqs, self.num_samples, self.q_in)
self.sampler.moveToThread(self.samplerThread)
self.samplerThread.started.connect(self.sampler.sampling)
self.sampler.abortStart.connect(self.onAbort)
self.ui.gainSlider.valueChanged[int].connect(self.setGain)
#self.ui.gainSlider.valueChanged[int].connect(self.sampler.changeGain, QtCore.Qt.QueuedConnection)
self.samplerThread.start(QtCore.QThread.NormalPriority)
def __init__(self, data_map, params, likelihood_constraint, no):
"""
Initializes the uniform sampler
Parameters
----------
likelihood_constraint: float
name says it all
no : int
Number of likelihood evaluations until this point
"""
self.LC = likelihood_constraint
self.number = no
Sampler.__init__(self, data_map, params)
def main():
from sampler import Sampler
s = Sampler("/dev/ttyACM0", debug=True)
s.set_freq(4000)
s.set_trigger(1, 490)
#s.set_trigger_enabled(False)
s.print_conf()
vcc = s.get_vcc()
print "Vcc={}".format(vcc)
scope = PowerScope(s)
#scope.run(record_path="scope.avi", frames=40)
scope.run()
s.close()
def setup_train_dataset(self):
"""
Each self.batch_size of examples follows the same distribution
"""
bd = BlockDesigner(self.train_examples)
if self.sample_class:
samp = Sampler(bd.remainder(), seed=self.random_seed)
images, labels = samp.custom_distribution(self.sample_class, self.batch_size, self.custom_distribution)
return {"X": images, "y": labels}
else:
blocks = bd.break_off_multiple_blocks(self.n_train_batches, self.batch_size)
images = []
labels = []
for block in blocks:
for y, ids in block.items():
for id in ids:
images.append(id)
labels.append(y)
return {"X": images, "y": labels}
def __init__(self, data_map, params, to_evolve, likelihood_constraint, no):
"""
Initializes the Metropolis sampler
Parameters
----------
to_evolve : object
The sample to evolve
likelihood_constraint: float
name says it all
no : int
Number of likelihood evaluations until this point
"""
Sampler.__init__(self, data_map, params)
self.source = to_evolve
self.LC = likelihood_constraint
self.step = params['dispersion']
self.number = no
def __init__(self, args):
self.args = args
self.model = Model()
try: # test: load model
if args.test:
self.model.load_model(args.model)
except: # train: init corpus and model
self.corpus = Corpus()
self.model.init_model(args)
if args.rule:
self.model.load_rules(args.rule)
self.corpus.init_corpus_and_model(args.train, self.model)
# init sampler
self.sampler = Sampler(self.model)
def __init__(self, numpyart, rho, temp, force, stepsize=0.001):
"""Initializes the various parts of an MD simulation.
Parameters:
numpyart: Number of particles
rho : Density
temp : Temperature
force: A force model
stepsize: Time step
"""
self.geometry = CubicLattice( numpyart, rho ) # Initialize a geometry,
# in this case a cubic lattice.
self.system = Ensemble( self.geometry, temp ) # Create an ensemble to
# store information about
# the simulation.
self.solver = VeloVerlet( self.system, force, stepsize ) # Create the sampler class.
self.sampler = Sampler()
def reset(self,sample_rate,interface):
self.time_of_last_meter = self.time_of_last_calc = time.time()
self.last_samples = 0
self.last_tx_agg = self.last_rx_agg = 0.0
self.last_txb2 = self.last_rxb2 = 0.0
self.mean_tx = self.mean_rx = 0.0
self.var_tx = self.var_rx = 0.0
self.mu_tx = self.mu_rx = 0.0
self.sigma2_tx = self.sigma2_rx = 0.0
self.request_queue = Queue()
self.sample_queue = Queue()
self.sampler = Sampler(self.request_queue,self.sample_queue,
sample_rate,self,interface=interface,
debug=self.debug)
if self.debug:
print("\33[H",end="") # move cursor home
print("\33[J",end="") # clear screen
class SemiLDA(object):
def __init__(self, args):
self.args = args
self.model = Model()
try: # test: load model
if args.test:
self.model.load_model(args.model)
except: # train: init corpus and model
self.corpus = Corpus()
self.model.init_model(args)
if args.rule:
self.model.load_rules(args.rule)
self.corpus.init_corpus_and_model(args.train, self.model)
# init sampler
self.sampler = Sampler(self.model)
def train(self):
for i in xrange(self.args.burn_in):
self.sampler.sample_corpus(self.corpus)
if not self.args.slient:
loglike = self.sampler.loglikelihood(self.corpus)
print 'burn in:%s, loglikelihood:%s' % (i, loglike)
for i in xrange(self.args.max_iter):
self.sampler.sample_corpus(self.corpus)
self.model.accumulative()
if not self.args.slient:
loglike = self.sampler.loglikelihood(self.corpus)
print 'iter:%s, loglikelihood:%s' % (i, loglike)
self.model.save_model(self.args.model)
if self.args.dump:
self.model.dump_topic_words(self.args.dump)
def infer(self):
self.sampler.sample_test(self.args.test, self.args.output, self.args.burn_in, self.args.max_iter)
class Analyzer(QtGui.QMainWindow):
num_threads = 10
def __init__(self, parent=None):
QtGui.QWidget.__init__(self, parent)
#QtCore.QThread.currentThread().setPriority(QtCore.QThread.HighPriority)
self.ui = Ui_MainWindow()
self.ui.setupUi(self)
self.q_in = Queue.Queue(maxsize=1000)
self.q_out = Queue.Queue(maxsize=1000)
self.startFreq = 130e6
self.stopFreq = 140e6
self.span = self.stopFreq - self.startFreq
self.center = self.startFreq + self.span/2
self.gain = 0
self.samp_rate = 2.4e6
self.nfft = self.ui.rbwEdit.itemData(self.ui.rbwEdit.currentIndex()).toInt()
self.num_samples = self.nfft*2
self.step = 1.8e6
self.FFT = True
self.HOLD = False
self.PEAK = False
self.CORRECT = False
self.AVERAGE = False
self.SAVE = [False, False, False]
self.saved = [False, False, False]
self.MARKERS = [False, False, False, False]
self.DELTA = False
self.delta_index = None
self.delta_value = 0
self.marker_index = [None, None, None, None]
self.marker_value = [0, 0, 0, 0]
self.DIF_MARKER = False
self.correction = 0
self.max_hold = []
self.peak_search = ()
self.avg = []
self.avg_counter = 0
self.num_avg = 1
self.ref = 80
self.length = 2048
self.slice_length = int(np.floor(self.length*(self.step/self.samp_rate)))
print "Slice: " + str(self.slice_length)
self.getFreqs()
#self.waterfallData = WaterfallData(100)
self.setupSampler()
self.setupWorkers()
self.setupPrinter()
self.ui.refEdit.setValue(self.ref)
self.ui.gainDisp.display(20)
self.ui.startEdit.valueChanged.connect(self.onStart)
self.ui.stopEdit.valueChanged.connect(self.onStop)
self.ui.rbwEdit.activated[int].connect(self.onRbw)
self.ui.centerEdit.valueChanged.connect(self.onCenter)
self.ui.spanEdit.valueChanged.connect(self.onSpan)
self.ui.refEdit.valueChanged.connect(self.onRef)
#self.ui.offsetButton.clicked.connect(self.onOffset)
self.ui.correctButton.clicked.connect(self.onCorrect)
self.ui.holdCheck.stateChanged.connect(self.onHold)
self.ui.peakCheck.stateChanged.connect(self.onPeak)
self.ui.avgCheck.stateChanged.connect(self.onAvg)
self.ui.traceButton.clicked.connect(self.onSave_1)
self.ui.traceButton_2.clicked.connect(self.onSave_2)
self.ui.traceButton_3.clicked.connect(self.onSave_3)
self.ui.markerCheck.stateChanged.connect(self.onMarker_1)
self.ui.markerCheck_2.stateChanged.connect(self.onMarker_2)
self.ui.markerCheck_3.stateChanged.connect(self.onMarker_3)
self.ui.markerCheck_4.stateChanged.connect(self.onMarker_4)
self.ui.markerEdit.valueChanged.connect(self.onMarkerEdit_1)
self.ui.markerEdit_2.valueChanged.connect(self.onMarkerEdit_2)
self.ui.markerEdit_3.valueChanged.connect(self.onMarkerEdit_3)
self.ui.markerEdit_4.valueChanged.connect(self.onMarkerEdit_4)
self.ui.deltaCheck.stateChanged.connect(self.onDelta)
self.ui.deltaEdit.valueChanged.connect(self.onDeltaEdit)
'''
try:
self.usb = USBController()
except:
print "Failed to initialize USB controller. Please reconnect."
self.close()
'''
self.getOffset()
def setupSampler(self):
self.samplerThread = QtCore.QThread(self)
self.sampler = Sampler(self.gain, self.samp_rate, self.freqs, self.num_samples, self.q_in)
self.sampler.moveToThread(self.samplerThread)
self.samplerThread.started.connect(self.sampler.sampling)
self.sampler.abortStart.connect(self.onAbort)
self.ui.gainSlider.valueChanged[int].connect(self.setGain)
#self.ui.gainSlider.valueChanged[int].connect(self.sampler.changeGain, QtCore.Qt.QueuedConnection)
self.samplerThread.start(QtCore.QThread.NormalPriority)
def setupPrinter(self):
self.printerThread = QtCore.QThread(self)
self.printer = Printer(self.q_out, self.slice_length)
self.printer.moveToThread(self.printerThread)
self.printerThread.started.connect(self.printer.printing)
self.printer.dataReady.connect(self.plotUpdate)
self.printerThread.start(QtCore.QThread.NormalPriority)
def setupWorkers(self):
self.threads = []
self.workers = []
for i in range(self.num_threads):
print 'Starting worker #' + str(i+1) + '...'
self.threads.append(QtCore.QThread(self))
self.workers.append(Worker(self.q_in, self.q_out, self.nfft, self.length, self.slice_length, self.samp_rate, i))
self.workers[i].moveToThread(self.threads[i])
self.threads[i].started.connect(self.workers[i].working)
self.workers[i].abort.connect(self.onAbort)
self.threads[i].start(QtCore.QThread.NormalPriority)
def getFreqs(self):
self.freqs = np.arange(self.startFreq+self.step/2, self.stopFreq+self.step/2, self.step)
self.ui.plot.setAxisScale(self.ui.plot.xBottom, self.startFreq/1e6, self.stopFreq/1e6)
self.ui.startEdit.setValue(self.startFreq/1e6)
self.ui.stopEdit.setValue(self.stopFreq/1e6)
self.ui.centerEdit.setValue(self.center/1e6)
self.ui.spanEdit.setValue(self.span/1e6)
self.ui.centerEdit.setSingleStep(self.span/1e6)
def updateFreqs(self):
self.getFreqs()
self.sampler.freqs = self.freqs
self.printer.xdata = []
self.printer.ydata = []
self.sampler.BREAK = True
self.max_hold = []
self.avg = []
self.marker_index = [None, None, None, None]
self.delta_index = None
with self.q_in.mutex:
self.q_in.queue.clear()
with self.q_out.mutex:
self.q_out.queue.clear()
self.ui.plot.setAxisScale(self.ui.plot.xBottom, self.startFreq/1e6, self.stopFreq/1e6)
self.ui.centerEdit.setSingleStep(self.span/1e6)
def updateRbw(self):
self.marker_index = [None, None, None, None]
self.delta_index = None
if self.nfft < 200:
self.num_samples = 256
else:
self.num_samples = self.nfft*2
if self.span >=50e6:
threshold = 200
elif self.span >= 20e6:
threshold = 500
else:
threshold = 1000
if self.nfft < threshold:
self.length = 1024
self.slice_length = int(np.floor(self.length*(self.step/self.samp_rate)))
else:
self.length = self.nfft
self.slice_length = int(np.floor(self.length*(self.step/self.samp_rate)))
@QtCore.pyqtSlot(object)
def plotUpdate(self, data):
ydata = data[0].tolist()
xdata = data[1].tolist()
if self.HOLD:
if len(ydata) != self.slice_length*len(self.freqs):
pass
else:
if len(self.max_hold) < len(data[0]):
self.max_hold = data[0]
else:
dif = data[0] - self.max_hold
dif = dif.clip(0)
self.max_hold += dif
self.ui.hold_curve.setData(xdata, self.max_hold.tolist())
if self.AVERAGE:
if len(ydata) != self.slice_length*len(self.freqs):
pass
else:
if self.avg_counter == 0:
if len(self.avg)<self.num_avg:
self.avg.append(data[0])
else:
self.avg = self.avg[1:]
self.avg.append(data[0])
self.avg_counter = len(self.freqs)
else:
self.avg_counter -= 1
temp = np.sum(self.avg, 0)
temp = temp/len(self.avg)
ydata = temp
if self.PEAK:
index = np.argmax(data[0])
self.peak_search = (xdata[index], ydata[index])
self.ui.peak_marker.setValue(self.peak_search[0], self.peak_search[1])
self.ui.peak_marker.setLabel(QwtText("Peak:\n%.2f MHz, %.2f dBm" % self.peak_search))
for i in range(len(self.SAVE)):
if self.SAVE[i]:
if self.saved[i]:
self.ui.saved_curves[i].detach()
self.saved[i] = False
self.ui.traces[i].setDown(False)
else:
self.ui.saved_curves[i].setData(xdata, ydata)
self.ui.saved_curves[i].attach(self.ui.plot)
self.saved[i] = True
self.SAVE[i] = False
for i in range(len(self.MARKERS)):
if self.MARKERS[i]:
if len(ydata) != self.slice_length*len(self.freqs):
pass
else:
self.ui.markers[i].attach(self.ui.plot)
if self.marker_index[i] == None:
value = self.marker_value[i]
index = np.argmin(np.abs(data[1]-value))
self.marker_index[i] = index
self.ui.markers[i].setValue(xdata[self.marker_index[i]], ydata[self.marker_index[i]])
self.ui.markers[i].setLabel(QwtText("Mk%i\n%.2fdBm" % (i+1, ydata[self.marker_index[i]])))
if self.DELTA:
if len(ydata) != self.slice_length*len(self.freqs):
pass
else:
self.ui.delta_marker.attach(self.ui.plot)
if self.delta_index == None:
value = self.delta_value
index = np.argmin(np.abs(data[1]-value))
self.delta_index = index
self.ui.delta_marker.setValue(xdata[self.delta_index], ydata[self.delta_index])
temp_x = xdata[self.delta_index] - xdata[self.marker_index[0]]
temp_y = ydata[self.delta_index] - ydata[self.marker_index[0]]
self.ui.delta_marker.setLabel(QwtText("Delta\n%.2fMHz, %.2fdB" % (temp_x, temp_y)))
while self.CORRECT > 0:
correction = np.reshape(data[0], (-1,self.slice_length))
correction = np.sum(correction, 0)/len(correction)
self.correction += correction
self.CORRECT -= 1
if self.CORRECT == 0:
self.correction = self.correction/10000
self.correction -= max(self.correction)
print max(self.correction)
#self.correction = self.correction[:100]+np.zeros(self.slice_length-200)+self.correction[-100:]
self.correction -= np.mean(self.correction)
for i in range(self.num_threads):
self.workers[i].correction = self.correction
print "New correction vector applied"
#print len(ydata)
self.ui.curve.setData(xdata, ydata)
self.ui.plot.replot()
@QtCore.pyqtSlot(float)
def setGain(self,gain):
self.gain = gain
self.sampler.gain = gain
@QtCore.pyqtSlot(float)
def onStart(self,start):
if start*1e6 < self.stopFreq:
self.startFreq = start*1e6
self.span = self.stopFreq - self.startFreq
self.center = self.startFreq + self.span/2
self.updateFreqs()
else:
self.startFreq = start*1e6
self.stopFreq = self.startFreq + self.step
self.span = self.stopFreq - self.startFreq
self.center = self.startFreq + self.span/2
self.updateFreqs()
@QtCore.pyqtSlot(float)
def onStop(self,stop):
if stop*1e6 > self.startFreq:
self.stopFreq = stop*1e6
self.span = self.stopFreq - self.startFreq
self.center = self.startFreq + self.span/2
self.updateFreqs()
else:
self.stopFreq = stop*1e6
self.startFreq = self.stopFreq - self.step
self.span = self.stopFreq - self.startFreq
self.center = self.startFreq + self.span/2
self.updateFreqs()
@QtCore.pyqtSlot(int)
def onRbw(self,index):
self.nfft = self.ui.rbwEdit.itemData(index).toInt()[0]
self.updateRbw()
self.sampler.num_samples = self.num_samples
self.printer.length = self.slice_length
self.updateFreqs()
for i in range(self.num_threads):
self.workers[i].nfft = self.nfft
self.workers[i].length = self.length
self.workers[i].slice_length = self.slice_length
self.workers[i].correction = 0
@QtCore.pyqtSlot(float)
def onCenter(self,center):
self.center = center*1e6
self.startFreq = self.center - self.span/2
self.stopFreq = self.center + self.span/2
self.updateFreqs()
@QtCore.pyqtSlot(float)
def onSpan(self,span):
self.span = span*1e6
self.startFreq = self.center - self.span/2
self.stopFreq = self.center + self.span/2
self.updateFreqs()
@QtCore.pyqtSlot(int)
def onRef(self, ref):
self.ref = ref
self.ui.plot.setAxisScale(self.ui.plot.yLeft, ref-100, ref)
self.ui.scaleColors(self.ref)
def getOffset(self):
self.sampler.MEASURE = True
time.sleep(0.5)
self.sampler.MEASURE = False
self.offset = self.sampler.offset
print "New offset: " + str(self.offset)
for i in range(self.num_threads):
self.workers[i].offset = self.offset
@QtCore.pyqtSlot()
def onSave_1(self):
self.SAVE[0] = True
self.ui.traceButton.setDown(True)
@QtCore.pyqtSlot()
def onSave_2(self):
self.SAVE[1] = True
self.ui.traceButton_2.setDown(True)
@QtCore.pyqtSlot()
def onSave_3(self):
self.SAVE[2] = True
self.ui.traceButton_3.setDown(True)
@QtCore.pyqtSlot(int)
def onMarker_1(self, state):
if state == 2:
self.MARKERS[0] = True
self.ui.deltaCheck.setEnabled(True)
self.ui.markerEdit.setEnabled(True)
self.ui.markerEdit.setRange(self.startFreq/1e6, self.stopFreq/1e6)
self.ui.markerEdit.setValue(self.center/1e6)
elif state == 0:
self.MARKERS[0] = False
self.ui.markerEdit.setDisabled(True)
self.ui.marker_1.detach()
self.ui.delta_marker.detach()
self.ui.deltaCheck.setDisabled(True)
@QtCore.pyqtSlot(float)
def onMarkerEdit_1(self, freq):
self.marker_index[0] = None
self.marker_value[0] = freq
@QtCore.pyqtSlot(int)
def onMarker_2(self, state):
if state == 2:
self.MARKERS[1] = True
self.ui.markerEdit_2.setEnabled(True)
self.ui.markerEdit_2.setRange(self.startFreq/1e6, self.stopFreq/1e6)
self.ui.markerEdit_2.setValue(self.center/1e6)
elif state == 0:
self.MARKERS[1] = False
self.ui.markerEdit_2.setDisabled(True)
self.ui.marker_2.detach()
@QtCore.pyqtSlot(float)
def onMarkerEdit_2(self, freq):
self.marker_index[1] = None
self.marker_value[1] = freq
@QtCore.pyqtSlot(int)
def onMarker_3(self, state):
if state == 2:
self.MARKERS[2] = True
self.ui.markerEdit_3.setEnabled(True)
self.ui.markerEdit_3.setRange(self.startFreq/1e6, self.stopFreq/1e6)
self.ui.markerEdit_3.setValue(self.center/1e6)
elif state == 0:
self.MARKERS[2] = False
self.ui.markerEdit_3.setDisabled(True)
self.ui.marker_3.detach()
@QtCore.pyqtSlot(float)
def onMarkerEdit_3(self, freq):
self.marker_index[2] = None
self.marker_value[2] = freq
@QtCore.pyqtSlot(int)
def onMarker_4(self, state):
if state == 2:
self.MARKERS[3] = True
self.ui.markerEdit_4.setEnabled(True)
self.ui.markerEdit_4.setRange(self.startFreq/1e6, self.stopFreq/1e6)
self.ui.markerEdit_4.setValue(self.center/1e6)
elif state == 0:
self.MARKERS[3] = False
self.ui.markerEdit_4.setDisabled(True)
self.ui.marker_4.detach()
@QtCore.pyqtSlot(float)
def onMarkerEdit_4(self, freq):
self.marker_index[3] = None
self.marker_value[3] = freq
@QtCore.pyqtSlot(int)
def onDelta(self, state):
if state == 2:
self.DELTA = True
self.ui.deltaEdit.setEnabled(True)
self.ui.deltaEdit.setRange(self.startFreq/1e6, self.stopFreq/1e6)
self.ui.deltaEdit.setValue(self.center/1e6)
elif state == 0:
self.DELTA = False
self.ui.deltaEdit.setDisabled(True)
self.ui.delta_marker.detach()
@QtCore.pyqtSlot(float)
def onDeltaEdit(self, freq):
self.delta_index = None
self.delta_value = freq
@QtCore.pyqtSlot(int)
def onHold(self, state):
if state == 2:
self.HOLD = True
self.ui.hold_curve.attach(self.ui.plot)
elif state == 0:
self.HOLD = False
self.ui.hold_curve.detach()
self.max_hold = []
@QtCore.pyqtSlot(int)
def onAvg(self, state):
if state == 2:
self.AVERAGE = True
self.num_avg = self.ui.avgEdit.value()
elif state == 0:
self.AVERAGE = False
self.num_avg = 1
self.avg = []
@QtCore.pyqtSlot(int)
def onPeak(self, state):
if state == 2:
self.PEAK = True
self.ui.peak_marker.attach(self.ui.plot)
elif state == 0:
self.PEAK = False
self.ui.peak_marker.detach()
self.peak_search = ()
def onCorrect(self):
self.correction = 0
self.CORRECT = 10000
@QtCore.pyqtSlot()
def onAbort(self):
print "Aborting..."
self.close()
def closeEvent(self, event):
print "Closing..."
while self.samplerThread.isRunning():
self.sampler.BREAK = True
time.sleep(0.1)
self.sampler.WORKING = False
time.sleep(0.1)
#self.sampler.sdr.close()
self.q_in.join()
self.samplerThread.quit()
#self.q_out.join()
print "dupa2"
if self.printerThread.isRunning():
self.printer.WORKING = False
self.printerThread.quit()
print 'dupa'
for i in range(self.num_threads):
if self.threads[i].isRunning():
self.threads[i].quit()
#self.q_out.join()
with self.q_out.mutex:
self.q_out.queue.clear()
print "dupa3"
'''with self.q_in.mutex:
class Parser:
def __init__(self, model, temp, c):
self.model = model
self.extractor = Extractor(model)
self.sampler = Sampler(model, self.extractor, temp, c) # model may be redundant
def decode(self, sent, num = 30):
trees = defaultdict(int)
exp_scores = self.extractor.all_exp_scores(sent)
seed = self.sampler.random_tree(sent, exp_scores)
optimal = seed
slw = self.extractor.tree_local_weights(seed)
sls = self.extractor.tree_score(slw)
sgw = self.extractor.tree_global_weights(seed)
sgs = self.extractor.tree_score(sgw)
ss = sls + sgs
for i in xrange(num): # or converge
tree = self.sampler.propose(sent, seed, exp_scores)
tlw = self.extractor.tree_local_weights(tree)
tls = self.extractor.tree_score(tlw)
tgw = self.extractor.tree_global_weights(tree)
tgs = self.extractor.tree_score(tgw)
ts = tls + tgs
if ts > ss or random() < self.sampler.trans_prob(sgs, tgs):
seed, ss = tree, ts
return optimal
def learn(self, instances, epochs = 10, num = 10):
model = self.model
sampler = self.sampler
extractor = self.extractor
for e in xrange(epochs):
print 'iteration: %d' % e
for i, sent in enumerate(instances):
if i % 100 == 0:
print i
gold = sent.get_gold_tree()
gw = extractor.tree_local_weights(gold) + extractor.tree_global_weights(gold)
seed = sampler.random_tree(sent)
sw = extractor.tree_local_weights(seed) + extractor.tree_global_weights(seed)
se = seed.error(gold)
for i in xrange(num):
tree = sampler.propose(sent, seed)
tw = extractor.tree_local_weights(tree) + extractor.tree_global_weights(tree)
te = tree.error(gold)
gs = self.extractor.tree_score(gw)
ts = self.extractor.tree_score(tw)
ss = self.extractor.tree_score(sw)
# C1
if gs - ts < te:
model.update(gw, tw)
# C2
if te < se: # tree > seed
if ts - ss < (se - te):
model.update(tw, sw) # se - te) margin
else: # tree <= seed
if ss - ts < (te - se):
model.update(sw, tw)
# accept or reject, should be probablistic, deterministic for now
if te < se:
seed, sw, se = tree, tw, te
model.qadd()
model.average()
# model.show()
def decode_show(self, sent, num = 30000):
o = open('samples.conll06', 'w')
statistics = {d: {h: 0 for h in sent if h is not d} for d in sent[1:]}
trees = defaultdict(int)
exp_scores = self.extractor.all_exp_scores(sent)
seed = self.sampler.random_tree(sent, exp_scores)
optimal = seed
slw = self.extractor.tree_local_weights(seed)
sls = self.extractor.tree_score(slw)
sgw = self.extractor.tree_global_weights(seed)
sgs = self.extractor.tree_score(sgw)
ss = sls + sgs
for i in xrange(num): # or converge
tree = self.sampler.propose(sent, seed, exp_scores)
tlw = self.extractor.tree_local_weights(tree)
tls = self.extractor.tree_score(tlw)
tgw = self.extractor.tree_global_weights(tree)
tgs = self.extractor.tree_score(tgw)
ts = tls + tgs
if ts > ss or random() < self.sampler.trans_prob(sgs, tgs):
seed, ss = tree, ts
for (d, h) in seed.head_map.items():
statistics[d][h] += 1
trees[self.tree_key(seed)] += 1
# print statistics
print 'trees:', len(trees)
for k, v in sorted(trees.items(), key = lambda x: x[1], reverse = True):
print k, '\t', v
for d in statistics:
for h in statistics[d]:
print d, h, exp_scores[d][h], statistics[d][h]
o.write(tree.to_str())
o.close()
return optimal
def change_head_stats(self, sent, num = 500):
exp_scores = self.extractor.all_exp_scores(sent)
statistics = {d: {h: 0 for h in sent if h is not d} for d in sent[1:]}
trees = defaultdict(int)
seed = self.sampler.random_tree(sent, exp_scores)
sw = self.extractor.tree_local_weights(seed) # should be global
ss = self.extractor.tree_score(sw)
for i in xrange(num): # or converge
tree = self.sampler.propose(sent, seed, exp_scores)
tw = self.extractor.tree_local_weights(tree)
ts = self.extractor.tree_score(tw)
if ts > ss or random() < self.sampler.trans_prob(seed, tree, ss, ts, exp_scores):
seed, ss = tree, ts
for (d, h) in seed.head_map.items():
statistics[d][h] += 1
trees[self.tree_key(seed)] += 1
print 'trees:', len(trees)
for k, v in sorted(trees.items(), key = lambda x: x[1], reverse = True):
print k, '\t', v
for d in statistics:
for h in statistics[d]:
print d, h, exp_scores[d][h], statistics[d][h]
# return optimal
def random_tree_stats(self, sent, num = 100000):
exp_scores = self.extractor.all_exp_scores(sent)
trees = defaultdict(int)
for i in xrange(num): # or converge
tree = self.sampler.random_tree(sent, exp_scores)
trees[self.tree_key(tree)] += 1
print 'trees:', len(trees)
for k, v in sorted(trees.items(), key = lambda x: x[1], reverse = True):
print k, '\t', v
def tree_key(self, tree):
return ','.join(['%s<-%s' % (d, h) for (d, h) in sorted(tree.head_map.items())])
def __init__(self, model, temp, c):
self.model = model
self.extractor = Extractor(model)
self.sampler = Sampler(model, self.extractor, temp, c) # model may be redundant
import tensorflow as tf
with tf.device('/cpu:0'):
from sampler import Sampler
sampler = Sampler(c_dim = 1, z_dim = 4, scale = 10.0, net_size = 32)
z1 = sampler.generate_z()
# sampler.show_image(sampler.generate(z1))
z2 = sampler.generate_z()
# sampler.show_image(sampler.generate(z2))
for i in xrange(8):
sampler.cppn.num_tan_layers = i
sampler.cppn.regen()
sampler.save_anim_gif(z1, z2, i + '.mp4', n_frame = 180, x_dim=512, y_dim=512)
class Monitor():
def __init__(self,name="mon0", sample_rate=1000,
estimation_interval=1.0,
meter_name=None,
meter_interval=30.0,
link_speed=10,
alarm_trigger_value=None,
cutoff=99,
interface="eth0",
controller_IP='10.0.0.11',
conflistener_IP='0.0.0.0',
confport=54736,
meter_file_name=None, # if not None, write metering
# data to a file instead of to Ceilometer
meter_host_and_port=None, # if not None, write metering
# data to a local port instead of to Ceilometer
debug=False,
log=False,
display_data=False,
resid=None,
projid=None,
username='******',
password=None,
tenantname='admin',
mode=None):
self.exit_flag = False
self.mode = mode
self.debug = debug
self.log = log
self.display_data = display_data
# self.meter_name = 'sdn_at_edge'
self.meter_name = meter_name
if alarm_trigger_value is None:
raise RuntimeError('missing alarm_trigger_value in Monitor.__init__')
else:
self.set_alarm_trigger(alarm_trigger_value)
self.set_cutoff(cutoff)
if self.debug and self.log:
self.logger = logging.getLogger(__name__)
now = datetime.now()
nowstr = now.strftime('%Y-%m-%dT%H.%M.%S')
logging.basicConfig(filename='monitor_' + (meter_file_name if meter_name is None else meter_name) + '_' + nowstr + '.log',
level=logging.DEBUG,
format='%(asctime)s %(levelname)s %(message)s')
# make the 'sh' module be quiet
logging.getLogger("sh").setLevel(logging.CRITICAL + 1)
self.conflistener_IP=conflistener_IP
self.conflistenerport=confport
self.name = name
#
self.config_queue = Queue()
self.config_reply = Queue()
self.reset(sample_rate,interface)
#
self.conf_event = Event()
#
if link_speed is None:
self.interface_type,self.linerate = self.get_linerate(interface)
if self.linerate is None:
raise(ValueError("Cannot determine the linerate of " + interface))
else:
self.set_linerate(link_speed)
self.interface_type = InterfaceType.Ethernet
self.link_speed = self.linerate_to_link_speed(self.linerate)
self.est_interval = estimation_interval
self.meter_interval = meter_interval
self.resource_ID = resid
self.project_ID = projid
self.username = username
self.tenantname = tenantname
if self.debug:
self.ceilocomm = None
else:
self.ceilocomm = CeiloComm(resid,projid,controller=controller_IP,
file_name=meter_file_name,
host_and_port=meter_host_and_port)
self.authpassword = password
if not self.debug:
self.get_auth_token()
# Print some trace outout on the terminal, or if self.log is
# True log the trace output in a log file.
def debugPrint(self,tracestring):
if self.log:
self.logger.debug(tracestring)
else:
print(tracestring)
def reset(self,sample_rate,interface):
self.time_of_last_meter = self.time_of_last_calc = time.time()
self.last_samples = 0
self.last_tx_agg = self.last_rx_agg = 0.0
self.last_txb2 = self.last_rxb2 = 0.0
self.mean_tx = self.mean_rx = 0.0
self.var_tx = self.var_rx = 0.0
self.mu_tx = self.mu_rx = 0.0
self.sigma2_tx = self.sigma2_rx = 0.0
self.request_queue = Queue()
self.sample_queue = Queue()
self.sampler = Sampler(self.request_queue,self.sample_queue,
sample_rate,self,interface=interface,
debug=self.debug)
if self.debug:
print("\33[H",end="") # move cursor home
print("\33[J",end="") # clear screen
def clear_queue(self,q):
while not q.empty():
try:
q.get(False)
except Empty:
continue
q.task_done()
# Start a new sampler
def start_sampler(self):
self.clear_queue(self.request_queue)
self.clear_queue(self.sample_queue)
self.reset(self.sampler.get_sample_rate(),
self.sampler.get_interface())
self.sampler.setDaemon(True)
self.sampler.start()
# Stop the running sampler
def stop_sampler(self):
self.request_queue.put('stop');
self.sampler.request_event.set()
# Return status of the sampler
def status_sampler(self,sampler):
if sampler is None:
# return 'stopped'
return SamplerStatus.stopped
elif sampler.stopped():
# return 'stopped'
return SamplerStatus.stopped
elif sampler.running():
# return 'running'
return SamplerStatus.running
else:
# return 'unknown'
return SamplerStatus.unknown
# Set sample rate (in samples per second)
def set_sample_rate(self, sampler, sample_rate):
sampler.set_sample_rate(sample_rate)
# Set estimation interval (in seconds)
def set_estimation_interval(self,interval):
self.est_interval = interval
# Set meter interval (in seconds)
def set_meter_interval(self,interval):
self.meter_interval = interval
# Set linerate (link_speed is given in Mbits/s)
def set_linerate(self,link_speed):
# self.linerate = link_speed * 1024 * 1024 / 8 # convert from Mbit/s to bytes/s
self.linerate = link_speed * 1000 * 1000 / 8 # convert from Mbit/s to bytes/s
# Convert back from linerate in bytes/s to link speed in Mbit/s
def linerate_to_link_speed(self,linerate):
return linerate * 8 / 1000 / 1000
# Set alarm trigger value (overload risk which will trigger an alarm; percentage)
def set_alarm_trigger(self,alarm_trigger_value):
self.alarm_trigger_value = alarm_trigger_value
# Set the cutoff for the overload risk calculation
def set_cutoff(self,cutoff):
self.cutoff = cutoff / 100.0
def listen_for_configuration(self):
server = createConfServer(self.conflistener_IP,self.conflistenerport,self)
server.serve_forever()
def handle_configuration(self,sampler,config_queue,config_reply):
reply = {}
if self.debug:
self.debugPrint('handle_configuration: config_queue.get()')
data = config_queue.get()
config_queue.task_done()
#
resume = data.get('resume')
if not resume is None and sampler.keep_running == False:
# resume is implemented by starting a new sampler thread.
self.start_sampler();
## The start request is sent to the sampler asynchronously, so we
## can't ask it if it has stopped simply by calling a method on the
## sampler object
# reply['started'] = sampler.running()
reply['resumed'] = 'ok'
#
stop = data.get('pause')
if not stop is None and sampler.keep_running == True:
# pause is implemented by telling the sampler thread to exit.
self.stop_sampler();
## The stop request is sent to the sampler asynchronously, so we
## can't ask it if it has stopped simply by calling a method on the
## sampler object
# reply['stopped'] = sampler.stopped()
reply['paused'] = 'ok'
#
status = data.get('status')
if not status is None:
pstatus = self.status_sampler(sampler)
if pstatus == SamplerStatus.stopped:
reply['status'] = 'paused'
elif pstatus == SamplerStatus.running:
reply['status'] = 'running'
else:
reply['status'] = 'unknown'
#
exit_cmd = data.get('exit')
if not exit_cmd is None and sampler.keep_running == True:
reply['exit'] = 'ok'
self.exit();
#
interface = data.get('interface')
if not interface is None:
sampler.set_interface(interface)
reply['interface'] = sampler.get_interface()
#
sample_rate = data.get('sample_rate')
if not sample_rate is None:
self.set_sample_rate(sampler,sample_rate)
reply['sample_rate'] = sampler.get_sample_rate()
#
estimation_interval = data.get('estimation_interval')
if not estimation_interval is None:
self.set_estimation_interval(estimation_interval)
reply['estimation_interval'] = self.est_interval
#
meter_interval = data.get('meter_interval')
if not meter_interval is None:
self.set_meter_interval(meter_interval)
reply['meter_interval'] = self.meter_interval
#
link_speed = data.get('link_speed')
if not link_speed is None:
self.set_linerate(link_speed)
reply['linerate'] = self.linerate
#
alarm_trigger = data.get('alarm_trigger')
if not alarm_trigger is None:
self.set_alarm_trigger(alarm_trigger)
reply['alarm_trigger'] = self.alarm_trigger_value
#
cutoff = data.get('cutoff')
if not cutoff is None:
self.set_cutoff(cutoff)
reply['cutoff'] = self.cutoff
#
if self.debug:
self.debugPrint('handle_configuration: ' + repr(self.config_reply) + '.put(' + repr(reply) + ')')
# pdb.set_trace()
if reply == {}:
reply['unknown option(s)'] = data
self.config_reply.put(reply)
if self.debug:
self.debugPrint('handle_configuration: qsize==' + repr(self.config_reply.qsize()))
# Get and save an authorization token and its expiration date/time
# from Keystone.
# The authorization token is used later when communicating with Ceilometer.
def get_auth_token(self):
if self.debug:
return
authtokenpair = self.ceilocomm.getAuthToken(tenantname=self.tenantname,username=self.username,password=self.authpassword)
self.authtoken = authtokenpair.get('tok')
authexpstr = authtokenpair.get('exp')
if authexpstr[-1] == 'Z':
expstrUTC = authexpstr[0:-1] # remove the Z
local_authexptime = datetime.strptime(expstrUTC,'%Y-%m-%dT%H:%M:%S')
local_tz_offset = datetime.fromtimestamp(time.mktime(time.localtime())) - datetime.fromtimestamp(time.mktime(time.gmtime()))
authexptime_no_tz = local_authexptime - local_tz_offset # Convert local time to UTC
self.authexptime = authexptime_no_tz.replace(tzinfo=UTC())
else:
self.authexptime = datetime.strptime(authexpstr,'%Y-%m-%dT%H:%M:%S')
def estimate(self, sampler):
# A wireless interface can increase or decrease its line rate
# so the line rate is checked regularly for WiFi.
if (self.interface_type == InterfaceType.Wireless):
dummy,self.linerate = self.get_linerate_wireless(sampler.get_interface())
t = time.time()
est_timer = t - self.time_of_last_calc
self.time_of_last_calc = t
# self.request_queue.put('r')
self.request_queue.put('rate_data')
rate_data = self.sample_queue.get()
self.sample_queue.task_done()
tx_agg = rate_data['tx_agg']
rx_agg = rate_data['rx_agg']
samples = rate_data['samples']
txb2 = rate_data['txb2']
rxb2 = rate_data['rxb2']
n = samples - self.last_samples
# Approximately kbytes/sec, but not really since we have a
# measurement jitter of the number of samples recorded in each
# sampling period. (Usually, by default ms). (The sampling
# often cannot keep up).
self.mean_tx = (tx_agg - self.last_tx_agg) / n
self.mean_rx = (rx_agg - self.last_rx_agg) / n
mean_square_tx = self.mean_tx*self.mean_tx
mean_square_rx = self.mean_rx*self.mean_rx
sum_square_tx = (txb2 - self.last_txb2) / n
sum_square_rx = (rxb2 - self.last_rxb2) / n
# NOTE: Rounding to 5 decimals is perhaps correct if we get
# negative variance due to the measurement jitter.
# It is not clear why we get a measurement jitter, so why this
# is necessary is a somewhat of a mystery.
self.var_tx = sum_square_tx - mean_square_tx
if self.var_tx < 0:
if self.display_data:
print("\33[9;1H") #
print("\33[0J")
print("WARNING: self.var_tx == " + str(self.var_tx))
self.var_tx = round(sum_square_tx - mean_square_tx,5) # round to avoid negative value
self.var_rx = sum_square_rx - mean_square_rx
if self.var_rx < 0:
if self.display_data:
print("\33[10;1H") #
print("\33[0J")
print("WARNING: self.var_rx == " + str(self.var_rx))
self.var_rx = round(sum_square_rx - mean_square_rx,5) # round to avoid negative value
if self.debug and False:
print("\33[12;1H")
print("\33[0J################### DEBUG ##################")
print("\33[0Jest_timer: %f"%est_timer)
print("\33[0Jself.mean_tx: %f self.mean_rx: %f"%(self.mean_tx,self.mean_rx))
print("\33[0Jtxb2: %f rxb2 %f"%(txb2,rxb2))
print("\33[0Jself.last_txb2 %f self.last_rxb2 %f"%(self.last_txb2,self.last_rxb2))
print("\33[0Jmean_square_tx %f mean_square_rx %f"%((mean_square_tx),(mean_square_rx)))
print("\33[0Jsum_square_tx %f sum_square_rx %f"%(sum_square_tx,sum_square_rx))
print("\33[0Jself.var tx: %f self.var_rx: %f"%(self.var_tx,self.var_rx))
self.last_samples = samples
self.last_tx_agg = tx_agg
self.last_rx_agg = rx_agg
self.last_txb2 = txb2
self.last_rxb2 = rxb2
# Estimate the moments
try:
if self.mean_tx != 0.0:
self.sigma2_tx = math.log(1.0+(self.var_tx/mean_square_tx))
self.mu_tx = math.log(self.mean_tx) - (self.sigma2_tx/2.0)
else:
# self.sigma2_tx = float('nan')
self.sigma2_tx = 0.0
self.mu_tx = 0.0
if self.mean_rx != 0.0:
self.sigma2_rx = math.log(1.0+(self.var_rx/(mean_square_rx)))
self.mu_rx = math.log(self.mean_rx) - (self.sigma2_rx/2.0)
else:
# self.sigma2_rx = float('nan')
self.sigma2_rx = 0.0
self.mu_rx = 0.0
# Calculate the overload risk
## Based on the original code, using the CDF (Cumulative Distribution Function).
# self.overload_risk_tx = (1-lognorm.cdf(self.linerate * self.cutoff,math.sqrt(self.sigma2_tx),0,math.exp(self.mu_tx)))*100
# self.overload_risk_rx = (1-lognorm.cdf(self.linerate * self.cutoff,math.sqrt(self.sigma2_rx),0,math.exp(self.mu_rx)))*100
## Using the survival function (1 - cdf). See http://docs.scipy.org/doc/scipy/reference/generated/scipy.stats.lognorm.html for a motivation).
self.overload_risk_tx = (lognorm.sf(self.linerate * self.cutoff,math.sqrt(self.sigma2_tx),0,math.exp(self.mu_tx)))*100
self.overload_risk_rx = (lognorm.sf(self.linerate * self.cutoff,math.sqrt(self.sigma2_rx),0,math.exp(self.mu_rx)))*100
### According to our dicussion, using the PPF (Percentile Point Function (or Quantile function).
# self.cutoff_rate_tx = (1-lognorm.ppf( self.cutoff,math.sqrt(self.sigma2_tx),0,math.exp(self.mu_tx)))
# self.cutoff_rate_rx = (1-lognorm.ppf( self.cutoff,math.sqrt(self.sigma2_rx),0,math.exp(self.mu_rx)))
# To estimate a risk: compare the calculated cutoff rate with the nominal line rate.
except ValueError as ve:
if self.display_data:
print("\33[2K")
print("Error in estimation: ({}):".format(ve))
traceback.print_exc()
if self.display_data:
print("\33[2K")
print("mean_tx: %.2e, mean_rx: %.2e "%(self.mean_tx,self.mean_rx))
if self.display_data:
print("\33[2K")
print("var_tx: %.2e, var_rx: %.2e "%(self.var_tx,self.var_rx))
if self.display_data:
print("\33[2K")
print("mean_square_tx: %.2e, mean_square_rx: %.2e "%(mean_square_tx,mean_square_rx))
if self.display_data:
print("\33[2K")
print("rate_data: %s"%(rate_data,))
exit(1)
if self.display_data:
try:
print("\33[H",end="") # move cursor home
# [PD] 2016-05-23, The calculation of "actual" seems to be buggy.
# print("\33[2KEstimate (sample_rate: {:d} actual({:d}), interface: {}, linerate: {:d}".format(sampler.get_sample_rate(), n, sampler.get_interface(),self.linerate))
print("\33[2Ksample_rate (/s): {:d}, interface: {}, linerate (bytes/s): {:d}, link speed (Mbit/s): {:d}".format(sampler.get_sample_rate(), sampler.get_interface(),self.linerate,self.link_speed))
print("\33[2KTX(mean: %.2e b/s std: %.2e mu: %.2e s2: %.2e, ol-risk: %.2e) "%(self.mean_tx,math.sqrt(self.var_tx),self.mu_tx,self.sigma2_tx, self.overload_risk_tx))
print("\33[2KRX(mean: %.2e b/s std: %.2e mu: %.2e s2: %.2e, ol-risk: %.2e) "%(self.mean_rx,math.sqrt(self.var_rx),self.mu_rx,self.sigma2_rx, self.overload_risk_rx))
print("\33[2Kestimation timer: {:.4f}".format(est_timer))
print("\33[2Kestimation interval: {:.2f}".format(self.est_interval))
print("\33[2Kmeter interval: %d"%(self.meter_interval))
print("\33[2Kmode: %d"%(self.mode))
if self.debug:
print("\33[2Kdebug: %s"%str(self.debug))
print("\33[2Ksample_queue size: %s"%str(self.sample_queue.qsize()))
except ValueError as ve:
print("\33[2KError in display ({}):".format(ve))
traceback.print_exc()
print("\33[2Kvar_tx: %.2e, var_rx: %.2e "%(self.var_tx,self.var_rx))
print("\33[2Krate_data: %s"%(rate_data,))
exit(1)
# FIXME: It should not be necessary to empty the queue here
# anymore, since the monitor code only puts stuff in the Queue
# on request.
# Verify this before remove this while loop!
while not self.sample_queue.empty():
self.sample_queue.get()
self.sample_queue.task_done()
# Return a tuple with interface type and linerate
def get_linerate(self,interface):
if OS == OS_type.darwin: # Fake it on OS X
# 1 Gbit/s in bytes/s (NOTE: 1000, not 1024; see IEEE 802.3-2008)
lr = (InterfaceType.Ethernet,(1000*1000*1000)/8)
else:
lr = self.get_linerate_ethernet(interface)
if lr is None:
lr = self.get_linerate_wireless(interface)
return lr
def get_linerate_ethernet(self,interface):
try:
# The link speed in Mbits/sec.
with open("/sys/class/net/{interface}/speed".format(interface=interface)) as f:
speed = int(f.read()) * 1000 * 1000 / 8 # convert to bytes/s (NOTE: 1000, not 1024; see IEEE 802.3-2008)
except IOError:
speed = None
finally:
return InterfaceType.Ethernet,speed
def get_linerate_wireless(self,interface):
try:
iwres = iwconfig(interface,_ok_code=[0,1])
rx = re.compile("Bit Rate=([0-9]+)\s*Mb/s", re.MULTILINE | re.IGNORECASE)
lrg = rx.search(iwres)
if lrg.groups() != ():
bit_rate = int(lrg.group(1)) # Mbits/s
lr = (InterfaceType.Wireless,bit_rate * 1000 * 1000 / 8) # convert Mbit/s to bytes/s (NOTE: 1000, not 1024; see IEEE 802.3-2008)
return lr
else:
return None,None
except ErrorReturnCode:
return None,None
# Store metered data in Ceilometer
def meter(self):
t = time.time()
self.time_of_last_meter = t
alarm_value_tx = self.overload_risk_tx > self.alarm_trigger_value
alarm_value_rx = self.overload_risk_rx > self.alarm_trigger_value
now = datetime.now(tz=UTC())
nowstr = now.strftime('%Y-%m-%dT%H.%M.%S')
data = {'timestamp': nowstr,
'interface': repr(self.sampler.get_interface()),
'linerate': repr(self.linerate),
'alarm_trigger_value': repr(self.alarm_trigger_value),
'cutoff': repr(self.cutoff),
'tx': repr(self.mean_tx),
'var_tx': repr(self.var_tx),
'mu_tx': repr(self.mu_tx),
'sigma2_tx': repr(self.sigma2_tx),
'overload_risk_tx': repr(self.overload_risk_tx),
'alarm_tx': repr(alarm_value_tx),
'rx': repr(self.mean_rx),
'var_rx': repr(self.var_rx),
'mu_rx': repr(self.mu_rx),
'sigma2_rx': repr(self.sigma2_rx),
'overload_risk_rx': repr(self.overload_risk_rx),
'alarm_rx': repr(alarm_value_rx),
'sample_rate': repr(self.sampler.get_sample_rate()),
'estimation_interval': repr(self.est_interval),
'meter_interval': repr(self.meter_interval)}
self.ceilorecord(now,data)
def ceilomessage(self,message):
now = datetime.now(tz=UTC())
nowstr = now.strftime('%Y-%m-%dT%H:%M:%S')
data = {message: repr(nowstr)}
self.ceilorecord(now,data)
def ceilorecord(self,now,data):
if not self.debug:
# Check if the authorization token has expired.
# Add one minute margin for possible bad time sync.
delta = timedelta(minutes=1)
if now + delta > self.authexptime:
self.get_auth_token()
if self.display_data:
print("\33[15;1H")
print("\33[0J") # clear rest of screen
if self.debug:
print("\33[0J" + str(data))
else:
rjson = self.ceilocomm.putMeter(self.meter_name,data,self.authtoken,
username=self.username,
project_id=self.project_ID,
resource_id=self.resource_ID)
if self.display_data:
print(json.dumps(rjson,indent=4))
def main(self):
self.time_of_last_meter = self.time_of_last_calc = time.time()
# Sampling is done in a separate thread to avoid
# introducing a delay jitter in our measurements.
# self.sampler.setDaemon(True)
self.sampler.start()
sleep_time = min(self.est_interval,self.meter_interval)
# Start the thread listening for configuration messages
conflistener = Thread(target=self.listen_for_configuration)
conflistener.setDaemon(True)
conflistener.start()
### FIXME:
# The conflistener may not be completely initialized when ceilocomm
# starts sending messages on the local port (in mode 1).
# We should wait for the conflistener to initialize before
# proceeding here.
if self.display_data:
print("\33[2J") # clear screen
self.ceilomessage('initialized')
try:
while not self.exit_flag:
if not self.config_queue.empty():
if self.debug:
self.debugPrint('main loop: handle_configuration()')
self.handle_configuration(self.sampler,self.config_queue,self.config_reply)
continue
# if self.status_sampler(self.sampler) == 'stopped':
if self.status_sampler(self.sampler) == SamplerStatus.stopped:
self.conf_event.wait()
continue
timestamp = time.time()
# time to do an estimation?
if timestamp >= (self.time_of_last_calc + self.est_interval):
self.estimate(self.sampler)
# time to store a meter value?
if timestamp >= (self.time_of_last_meter + self.meter_interval):
self.meter()
self.conf_event.wait(sleep_time)
self.conf_event.clear()
print('exit')
except KeyboardInterrupt:
self.exit()
def exit(self):
self.stop_sampler() # make sure the sampler thread is stopped in an
# orderly manner
self.ceilomessage('exited')
self.exit_flag = True
class Analyzer(QtGui.QMainWindow):
def __init__(self, parent=None):
QtGui.QWidget.__init__(self, parent)
### MODE FLAGS ###
self.RUNNING = False
self.HF = False
self.WATERFALL = False
self.MARKERS = [False, False, False, False]
self.DELTA = False
self.HOLD = False
self.AVERAGE = False
self.PEAK = False
self.SAVE = [False, False, False]
### VARIABLES ###
self.step = 1.8e6
self.ref = 0
self.gain = 0
self.sampRate = 2.4e6
self.waterfallHistorySize = 100
self.markers = [None, None, None, None]
self.markerIndex = [None, None, None, None]
self.markerValue = [None, None, None, None]
self.markerText = [None, None, None, None]
self.deltaIndex = None
self.deltaValue = None
self.saveCurves = [None, None, None]
self.penColors = ['g', 'c', 'm']
self.ui = Interface()
self.ui.setupUi(self, self.step, self.ref)
self.nwelch = 15
self.nfft = self.ui.rbwEdit.itemData(self.ui.rbwEdit.currentIndex()).toInt()[0]
self.numSamples = self.nfft*(1+self.nwelch)/2
self.length = self.nfft
self.sliceLength = int(np.floor(self.length*(self.step/self.sampRate)))
self.createPlot()
### SIGNALS AND SLOTS ###
self.ui.startButton.clicked.connect(self.onStart)
self.ui.stopButton.clicked.connect(self.onStop)
self.ui.plotTabs.currentChanged.connect(self.onMode)
self.ui.startEdit.valueChanged.connect(self.onStartFreq)
self.ui.stopEdit.valueChanged.connect(self.onStopFreq)
self.ui.rbwEdit.activated[int].connect(self.onRbw)
self.ui.centerEdit.valueChanged.connect(self.onCenter)
self.ui.spanEdit.valueChanged.connect(self.onSpan)
self.ui.refEdit.valueChanged.connect(self.onRef)
self.ui.markerCheck_1.stateChanged.connect(self.onMarker_1)
self.ui.markerEdit_1.valueChanged.connect(self.onMarkerEdit_1)
self.ui.deltaCheck.stateChanged.connect(self.onDelta)
self.ui.deltaEdit.valueChanged.connect(self.onDeltaEdit)
self.ui.holdCheck.stateChanged.connect(self.onHold)
self.ui.avgCheck.stateChanged.connect(self.onAvg)
self.ui.avgEdit.valueChanged.connect(self.onAvgEdit)
self.ui.peakCheck.stateChanged.connect(self.onPeak)
self.ui.traceButton_1.clicked.connect(self.onSave_1)
self.ui.traceButton_2.clicked.connect(self.onSave_2)
self.ui.traceButton_3.clicked.connect(self.onSave_3)
self.ui.waterfallCheck.stateChanged.connect(self.onWaterfall)
#self.usb = USBController()
### PLOT FUNCTIONS ###
def createPlot(self):
self.plot = pg.PlotWidget()
if self.HF == False:
self.ui.startEdit.setRange(30, 1280-self.step/1e6)
self.ui.stopEdit.setRange(30+self.step/1e6, 1280)
self.ui.centerEdit.setRange(30+self.step/2e6, 1280-self.step/2e6)
self.startFreq = 80e6
self.stopFreq = 100e6
self.ui.plotLayout.addWidget(self.plot)
elif self.HF:
self.ui.startEdit.setRange(1, 30-self.step/1e6)
self.ui.stopEdit.setRange(1+self.step/1e6, 30)
self.ui.centerEdit.setRange(1+self.step/2e6, 30-self.step/2e6)
self.startFreq = 1e6
self.stopFreq = 30e6
self.ui.plotLayout_2.addWidget(self.plot)
self.plot.showGrid(x=True, y=True)
self.plot.setMouseEnabled(x=False, y=False)
self.plot.setYRange(self.ref-100, self.ref, padding=0)
self.plot.setXRange(self.startFreq/1e6, self.stopFreq/1e6, padding=0)
self.curve = self.plot.plot(pen='y')
self.span = self.stopFreq - self.startFreq
self.center = self.startFreq + self.span/2
# Crosshair
self.vLine = pg.InfiniteLine(angle=90, movable=False)
self.hLine = pg.InfiniteLine(angle=0, movable=False)
self.plot.addItem(self.vLine, ignoreBounds=True)
self.plot.addItem(self.hLine, ignoreBounds=True)
self.posLabel = pg.TextItem(anchor=(0,1))
self.plot.addItem(self.posLabel)
self.mouseProxy = pg.SignalProxy(self.plot.scene().sigMouseMoved,
rateLimit=20, slot=self.mouseMoved)
self.updateFreqs()
def deletePlot(self):
self.curve.deleteLater()
self.curve = None
if self.HF == False:
self.ui.plotLayout.removeWidget(self.plot)
else:
self.ui.plotLayout_2.removeWidget(self.plot)
self.plot.deleteLater()
self.plot = None
def createWaterfall(self):
self.WATERFALL = True
self.waterfallPlot = pg.PlotWidget()
if self.HF == False:
self.ui.plotLayout.addWidget(self.waterfallPlot)
else:
self.ui.plotLayout_2.addWidget(self.waterfallPlot)
self.waterfallPlot.setYRange(-self.waterfallHistorySize, 0)
self.waterfallPlot.setXLink(self.plot)
self.waterfallPlot.setMouseEnabled(x=False, y=False)
self.waterfallHistogram = pg.HistogramLUTItem(fillHistogram=False)
self.waterfallHistogram.gradient.loadPreset("flame")
self.waterfallHistogram.setHistogramRange(self.ref-100, self.ref)
self.waterfallImg = None
def deleteWaterfall(self):
if self.WATERFALL:
self.WATERFALL = False
if self.HF == False:
self.ui.plotLayout.removeWidget(self.waterfallPlot)
else:
self.ui.plotLayout_2.removeWidget(self.waterfallPlot)
self.waterfallPlot.deleteLater()
self.waterfallPlot = None
self.waterfallHistogram.deleteLater()
self.waterfallHistogram = None
if self.waterfallImg is not None:
self.waterfallImg.deleteLater()
self.waterfallImg = None
def updateFreqs(self):
self.freqs = np.arange(self.startFreq+self.step/2, self.stopFreq+self.step/2, self.step)
self.markerIndex = [None, None, None, None]
self.deltaIndex = None
self.peakIndex = None
self.holdData = None
self.avgArray = None
self.avgCounter = 0
self.saveCurves = [None, None, None]
if self.RUNNING:
self.sampler.freqs = self.freqs
self.sampler.BREAK = True
self.xData = []
self.yData = []
self.waterfallImg = None
self.plot.setXRange(self.startFreq/1e6, self.stopFreq/1e6, padding=0)
self.ui.startEdit.setValue(self.startFreq/1e6)
self.ui.stopEdit.setValue(self.stopFreq/1e6)
self.ui.centerEdit.setValue(self.center/1e6)
self.ui.spanEdit.setValue(self.span/1e6)
def updateRbw(self):
self.markerIndex = [None, None, None, None]
self.deltaIndex = None
self.holdData = None
self.avgArray = None
self.avgCounter = 0
self.saveCurves = [None, None, None]
self.numSamples = self.nfft*(1+self.nwelch)/2
if self.numSamples < 200:
self.numSamples = 256
if self.span >=50e6:
threshold = 200
elif self.span >= 20e6:
threshold = 500
else:
threshold = 1000
if self.nfft < threshold:
self.length = 1024
self.sliceLength = int(np.floor(self.length*(self.step/self.sampRate)))
else:
self.length = self.nfft
self.sliceLength = int(np.floor(self.length*(self.step/self.sampRate)))
@QtCore.pyqtSlot(object)
def plotUpdate(self, data):
index = data[0]
xTemp = data[2]
yTemp = data[1]
if len(yTemp) == 0:
self.xData = xTemp
self.yData = yTemp
else:
self.xData = np.concatenate((self.xData[:index*self.sliceLength], xTemp, self.xData[(index+1)*self.sliceLength:]))
self.yData = np.concatenate((self.yData[:index*self.sliceLength], yTemp, self.yData[(index+1)*self.sliceLength:]))
yData = self.yData
if len(self.xData) == self.sliceLength*len(self.freqs):
if self.AVERAGE:
if self.avgCounter == 0:
if self.avgArray is None:
self.avgArray = np.array([self.yData])
elif self.avgArray.shape[0] < self.numAvg:
self.avgArray = np.append(self.avgArray, np.array([self.yData]), axis=0)
else:
self.avgArray = np.roll(self.avgArray, -1, axis=0)
self.avgArray[-1] = self.yData
self.avgData = np.average(self.avgArray, axis=0)
#self.curve.setData(self.xData, yData)
self.avgCounter = len(self.freqs)
else:
self.avgCounter -= 1
yData = self.avgData
for i in range(len(self.MARKERS)):
if self.MARKERS[i]:
if self.markerIndex[i] == None:
index = np.argmin(np.abs(self.xData-self.markerValue[i]))
self.markerIndex[i] = index
self.markers[i].setIndex(self.markerIndex[i])
self.markerText[i].setText("Mk1:\nf=%0.1f MHz\nP=%0.1f dBm" % (self.xData[self.markerIndex[i]], yData[self.markerIndex[i]]))
if self.DELTA:
if self.deltaIndex == None:
index = np.argmin(np.abs(self.xData-self.deltaValue))
self.deltaIndex = index
self.delta.setIndex(self.deltaIndex)
dx = self.xData[self.deltaIndex] - self.xData[self.markerIndex[0]]
dy = yData[self.deltaIndex] - yData[self.markerIndex[0]]
self.deltaText.setText("Delta:\ndf=%0.1f MHz\ndP=%0.1f dB" % (dx, dy))
if self.HOLD:
if self.holdData is None:
self.holdData = yData
else:
self.holdData = np.amax([self.holdData, yData], axis=0)
self.holdCurve.setData(self.xData, self.holdData)
if self.PEAK:
self.peakIndex = np.argmax(yData)
self.peak.setIndex(self.peakIndex)
self.peakText.setText("Peak:\nf=%0.1f MHz\nP=%0.1f dBm" % (self.xData[self.peakIndex], yData[self.peakIndex]))
for i in range(len(self.SAVE)):
if self.SAVE[i]:
if self.saveCurves[i] is None:
self.saveCurves[i] = self.plot.plot(pen=self.penColors[i])
self.plot.addItem(self.saveCurves[i])
self.saveCurves[i].setData(self.xData, yData)
else:
self.plot.removeItem(self.saveCurves[i])
self.saveCurves[i] = None
self.SAVE[i] = False
if self.WATERFALL:
self.waterfallUpdate(self.xData, yData)
#print len(yData)
self.curve.setData(self.xData, yData)
def waterfallUpdate(self, xData, yData):
if self.waterfallImg is None:
self.waterfallImgArray = np.zeros((self.waterfallHistorySize, len(xData)))
self.waterfallImg = pg.ImageItem()
self.waterfallImg.scale((xData[-1] - xData[0]) / len(xData), 1)
self.waterfallImg.setPos(xData[0],-self.waterfallHistorySize)
self.waterfallPlot.clear()
self.waterfallPlot.addItem(self.waterfallImg)
self.waterfallHistogram.setImageItem(self.waterfallImg)
self.plot.setXRange(self.startFreq/1e6, self.stopFreq/1e6)
self.waterfallImgArray = np.roll(self.waterfallImgArray, -1, axis=0)
self.waterfallImgArray[-1] = yData
self.waterfallImg.setImage(self.waterfallImgArray.T,
autoLevels=True, autoRange=False)
### SETUP SAMPLER AND WORKER
def setupSampler(self):
self.samplerThread = QtCore.QThread(self)
self.sampler = Sampler(self.gain, self.sampRate, self.freqs, self.numSamples)
self.sampler.moveToThread(self.samplerThread)
self.samplerThread.started.connect(self.sampler.sampling)
self.sampler.samplerError.connect(self.onError)
self.sampler.dataAcquired.connect(self.worker.work)
self.samplerThread.start(QtCore.QThread.NormalPriority)
def setupWorker(self):
self.workerThread = QtCore.QThread(self)
self.worker = Worker(self.nfft, self.length, self.sliceLength, self.sampRate, self.nwelch)
self.worker.moveToThread(self.workerThread)
self.worker.dataReady.connect(self.plotUpdate)
self.workerThread.start(QtCore.QThread.NormalPriority)
### GUI FUNCTIONS ###
def mouseMoved(self, evt):
pos = evt[0]
if self.plot.sceneBoundingRect().contains(pos):
mousePoint = self.plot.getViewBox().mapSceneToView(pos)
self.posLabel.setText("f=%0.1f MHz, P=%0.1f dBm" % (mousePoint.x(),mousePoint.y()))
self.vLine.setPos(mousePoint.x())
self.hLine.setPos(mousePoint.y())
self.posLabel.setPos(mousePoint.x(), mousePoint.y())
@pyqtSlot()
def onStart(self):
self.ui.startButton.setEnabled(False)
self.ui.stopButton.setEnabled(True)
self.ui.statusbar.setVisible(False)
self.ui.statusbar.clearMessage()
self.ui.settingsTabs.setEnabled(True)
self.setupWorker()
self.setupSampler()
self.RUNNING = True
@pyqtSlot()
def onStop(self):
self.ui.startButton.setEnabled(True)
self.ui.stopButton.setEnabled(False)
self.ui.settingsTabs.setEnabled(False)
self.samplerThread.exit(0)
self.sampler.WORKING = False
self.sampler = None
self.workerThread.exit(0)
self.worker = None
self.RUNNING = False
@pyqtSlot(int)
def onMode(self, index):
if index == 0:
self.deletePlot()
self.ui.waterfallCheck.setChecked(False)
self.HF = False
self.createPlot()
self.ui.settingsTabs.setEnabled(True)
elif index == 1:
self.deletePlot()
self.ui.waterfallCheck.setChecked(False)
self.HF = True
self.createPlot()
self.ui.settingsTabs.setEnabled(True)
elif index == 2:
self.ui.settingsTabs.setEnabled(True)
elif index == 3:
self.ui.settingsTabs.setEnabled(False)
@pyqtSlot(float)
def onStartFreq(self, value):
self.startFreq = value*1e6
if self.startFreq > self.stopFreq - self.step:
self.stopFreq = self.startFreq + self.step
self.span = self.stopFreq - self.startFreq
self.center = self.startFreq + self.span/2
self.updateFreqs()
@pyqtSlot(float)
def onStopFreq(self, value):
self.stopFreq = value*1e6
if self.stopFreq < self.startFreq + self.step:
self.startFreq = self.stopFreq - self.step
self.span = self.stopFreq - self.startFreq
self.center = self.startFreq + self.span/2
self.updateFreqs()
@pyqtSlot(int)
def onRbw(self, index):
self.nfft = self.ui.rbwEdit.itemData(index).toInt()[0]
self.updateRbw()
if self.RUNNING:
self.sampler.numSamples = self.numSamples
self.worker.nfft = self.nfft
self.worker.length = self.length
self.worker.sliceLength = self.sliceLength
self.worker.correction = 0
self.sampler.BREAK = True
self.xData = []
self.yData = []
self.waterfallImg = None
print self.numSamples
print self.nfft
@pyqtSlot(float)
def onCenter(self, center):
self.center = center*1e6
self.startFreq = self.center - self.span/2
self.stopFreq = self.center + self.span/2
self.updateFreqs()
@pyqtSlot(float)
def onSpan(self,span):
self.span = span*1e6
self.startFreq = self.center - self.span/2
self.stopFreq = self.center + self.span/2
self.updateFreqs()
@pyqtSlot(int)
def onRef(self, ref):
self.ref = ref
self.plot.setYRange(self.ref-100, self.ref)
if self.WATERFALL:
self.waterfallHistogram.setHistogramRange(self.ref-100, self.ref)
# Markers
@pyqtSlot(int)
def onMarker_1(self, state):
if state == 2:
self.MARKERS[0] = True
self.ui.deltaCheck.setEnabled(True)
self.ui.markerEdit_1.setEnabled(True)
self.ui.markerEdit_1.setRange(1, 1280)
self.ui.markerEdit_1.setValue(self.center/1e6)
self.markerValue[0] = self.ui.markerEdit_1.value()
self.marker_1 = pg.CurvePoint(self.curve)
self.plot.addItem(self.marker_1)
self.markers[0] = self.marker_1
self.markerArrow_1 = pg.ArrowItem(angle=270)
self.markerArrow_1.setParentItem(self.marker_1)
self.markerText_1 = pg.TextItem("Mk1", anchor=(0.5, 1.5))
self.markerText_1.setParentItem(self.marker_1)
self.markerText[0] = self.markerText_1
elif state == 0:
self.MARKERS[0] = False
self.markerIndex[0] = None
self.markerValue[0] = None
self.markerText[0] = None
self.ui.markerEdit_1.setDisabled(True)
self.ui.deltaCheck.setDisabled(True)
self.plot.removeItem(self.marker_1)
self.marker_1.deleteLater()
self.marker_1 = None
@pyqtSlot(float)
def onMarkerEdit_1(self, freq):
self.markerIndex[0] = None
self.markerValue[0] = freq
@pyqtSlot(int)
def onDelta(self, state):
if state == 2:
self.DELTA = True
self.ui.deltaEdit.setEnabled(True)
self.ui.deltaEdit.setRange(1, 1280)
self.ui.deltaEdit.setValue(self.center/1e6)
self.deltaValue = self.ui.deltaEdit.value()
self.delta = pg.CurvePoint(self.curve)
self.plot.addItem(self.delta)
self.deltaArrow = pg.ArrowItem(angle=270)
self.deltaArrow.setParentItem(self.delta)
self.deltaText = pg.TextItem("Delta:", anchor=(0.5, 1.5))
self.deltaText.setParentItem(self.delta)
elif state == 0:
self.DELTA = False
self.ui.deltaEdit.setDisabled(True)
self.plot.removeItem(self.delta)
self.delta.deleteLater()
self.delta = None
@pyqtSlot(float)
def onDeltaEdit(self, freq):
self.deltaIndex = None
self.deltaValue = freq
# MAX HOLD
@pyqtSlot(int)
def onHold(self, state):
if state == 2:
self.HOLD = True
self.holdCurve = self.plot.plot(pen='r')
self.plot.addItem(self.holdCurve)
self.holdData = None
elif state == 0:
self.HOLD = False
self.holdData = None
self.plot.removeItem(self.holdCurve)
# AVERAGE
@pyqtSlot(int)
def onAvg(self, state):
if state == 2:
self.AVERAGE = True
self.numAvg = self.ui.avgEdit.value()
self.avgArray = None
self.avgCounter = 0
elif state == 0:
self.AVERAGE = False
self.numAvg = None
self.avg = []
@pyqtSlot(float)
def onAvgEdit(self, num):
self.numAvg = num
self.avgArray = None
self.avgCounter = 0
# PEAK
@pyqtSlot(int)
def onPeak(self, state):
if state == 2:
self.PEAK = True
self.peak = pg.CurvePoint(self.curve)
self.plot.addItem(self.peak)
self.peakArrow = pg.ArrowItem(angle=270)
self.peakArrow.setParentItem(self.peak)
self.peakText = pg.TextItem("Peak:", anchor=(0.5, 1.5))
self.peakText.setParentItem(self.peak)
elif state == 0:
self.PEAK = False
self.plot.removeItem(self.peak)
self.peak.deleteLater()
self.peak = None
@QtCore.pyqtSlot()
def onSave_1(self):
self.SAVE[0] = True
self.ui.traceButton_1.setDown(True)
@QtCore.pyqtSlot()
def onSave_2(self):
self.SAVE[1] = True
self.ui.traceButton_2.setDown(True)
@QtCore.pyqtSlot()
def onSave_3(self):
self.SAVE[2] = True
self.ui.traceButton_3.setDown(True)
@pyqtSlot(object)
def onError(self, errorMsg):
#self.ui.statusbar.addWidget(QtGui.QLabel(errorMsg))
self.ui.statusbar.showMessage("ERROR: " + errorMsg)
self.ui.statusbar.setVisible(True)
self.ui.stopButton.click()
@pyqtSlot(int)
def onWaterfall(self, state):
if state ==2:
self.createWaterfall()
elif state == 0:
self.deleteWaterfall()
from sampler import Sampler
if __name__ == '__main__':
sampler = Sampler(z_dim=4, c_dim=3, scale=8.0, net_size=64)
z1 = sampler.generate_z()
img = sampler.generate(z1)
sampler.show_image(img)
class SuperSID():
'''
This is the main class which creates all other objects.
In CMV pattern, this is the Controller.
'''
running = False # class attribute to indicate if the SID application is running
def __init__(self, config_file='', read_file=None):
self.version = "EG 1.4 20150801"
self.timer = None
self.sampler = None
self.viewer = None
# Read Config file here
print("Reading supersid.cfg ...", end='')
# this script accepts a .cfg file as optional argument else we default
# so that the "historical location" or the local path are explored
self.config = Config(config_file or "supersid.cfg")
# once the .cfg read, some sanity checks are necessary
self.config.supersid_check()
if not self.config.config_ok:
print("ERROR:", self.config.config_err)
exit(1)
else:
print(self.config.filenames) # good for debugging: what .cfg file(s) were actually read
self.config["supersid_version"] = self.version
# Create Logger - Logger will read an existing file if specified as -r|--read script argument
self.logger = Logger(self, read_file)
if 'utc_starttime' not in self.config:
self.config['utc_starttime'] = self.logger.sid_file.sid_params["utc_starttime"]
# Create the viewer based on the .cfg specification (or set default):
# Note: the list of Viewers can be extended provided they implement the same interface
if self.config['viewer'] == 'wx' and wx_imported:
# GUI Frame to display real-time VLF Spectrum based on wxPython
self.viewer = wxSidViewer(self)
elif self.config['viewer'] == 'tk':
# GUI Frame to display real-time VLF Spectrum based on tkinter (python 2 and 3)
self.viewer = tkSidViewer(self)
elif self.config['viewer'] == 'text':
# Lighter text version a.k.a. "console mode"
self.viewer = textSidViewer(self)
else:
print("ERROR: Unknown viewer", sid.config['viewer'])
exit(2)
# Assign desired psd function for calculation after capture
# currently: using matplotlib's psd
if (self.config['viewer'] == 'wx' and wx_imported) or self.config['viewer'] == 'tk':
self.psd = self.viewer.get_psd # calculate psd and draw result in one call
else:
self.psd = mlab_psd # calculation only
# calculate Stations' buffer_size
self.buffer_size = int(24*60*60 / self.config['log_interval'])
# Create Sampler to collect audio buffer (sound card or other server)
self.sampler = Sampler(self, audio_sampling_rate = self.config['audio_sampling_rate'], NFFT = 1024);
if not self.sampler.sampler_ok:
self.close()
exit(3)
else:
self.sampler.set_monitored_frequencies(self.config.stations);
# Link the logger.sid_file.data buffers to the config.stations
for ibuffer, station in enumerate(self.config.stations):
station['raw_buffer'] = self.logger.sid_file.data[ibuffer]
# Create Timer
self.viewer.status_display("Waiting for Timer ... ")
self.timer = SidTimer(self.config['log_interval'], self.on_timer)
def clear_all_data_buffers(self):
"""Clear the current memory buffers and pass to the next day"""
self.logger.sid_file.clear_buffer(next_day = True)
def on_timer(self):
"""Callback function triggered by SidTimer every 'log_interval' seconds"""
# current_index is the position in the buffer calculated from current UTC time
current_index = self.timer.data_index
utc_now = self.timer.utc_now
# Get new data and pass them to the View
message = "%s [%d] Capturing data..." % (self.timer.get_utc_now(), current_index)
self.viewer.status_display(message, level=1)
signal_strengths = []
try:
data = self.sampler.capture_1sec() # return a list of 1 second signal strength
Pxx, freqs = self.psd(data, self.sampler.NFFT, self.sampler.audio_sampling_rate)
for binSample in self.sampler.monitored_bins:
signal_strengths.append(Pxx[binSample])
except IndexError as idxerr:
print("Index Error:", idxerr)
print("Data len:", len(data))
except TypeError as err_te:
print("Warning:", err_te)
# ensure that one thread at the time accesses the sid_file's' buffers
with self.timer.lock:
# do we need to save some files (hourly) or switch to a new day?
if self.timer.utc_now.minute == 0 and self.timer.utc_now.second < self.config['log_interval']:
if self.config['hourly_save'] == 'YES':
fileName = "hourly_current_buffers.raw.ext.%s.csv" % (self.logger.sid_file.sid_params['utc_starttime'][:10])
self.save_current_buffers(filename=fileName, log_type='raw', log_format='supersid_extended')
# a new day!
if self.timer.utc_now.hour == 0:
# use log_type and log_format(s) requested by the user in the .cfg
for log_format in self.config['log_format'].split(','):
self.save_current_buffers(log_type=self.config['log_type'], log_format=log_format)
self.clear_all_data_buffers()
# Save signal strengths into memory buffers ; prepare message for status bar
message = self.timer.get_utc_now() + " [%d] " % current_index
for station, strength in zip(self.config.stations, signal_strengths):
station['raw_buffer'][current_index] = strength
message += station['call_sign'] + "=%f " % strength
self.logger.sid_file.timestamp[current_index] = utc_now
# end of this thread/need to handle to View to display captured data & message
self.viewer.status_display(message, level=2)
def save_current_buffers(self, filename='', log_type='raw', log_format = 'both'):
''' Save buffer data from logger.sid_file
log_type = raw or filtered
log_format = sid_format|sid_extended|supersid_format|supersid_extended|both|both_extended'''
filenames = []
if log_format.startswith('both') or log_format.startswith('sid'):
fnames = self.logger.log_sid_format(self.config.stations, '', log_type=log_type, extended=log_format.endswith('extended')) # filename is '' to ensure one file per station
filenames += fnames
if log_format.startswith('both') or log_format.startswith('supersid'):
fnames = self.logger.log_supersid_format(self.config.stations, filename, log_type=log_type, extended=log_format.endswith('extended'))
filenames += fnames
return filenames
def on_close(self):
self.close()
def run(self, wx_app = None):
"""Start the application as infinite loop accordingly to need"""
self.__class__.running = True
self.viewer.run()
def close(self):
"""Call all necessary stop/close functions of children objects"""
self.__class__.running = False
if self.sampler:
self.sampler.close()
if self.timer:
self.timer.stop()
if self.viewer:
self.viewer.close()
def about_app(self):
"""return a text indicating various information on the app, incl, versions"""
msg = """This program is designed to detect Sudden Ionosphere Disturbances (SID), \
which are caused by a blast of intense X-ray radiation when there is a Solar Flare on the Sun.\n\n""" + \
"Controller: " + self.version + "\n" + \
"Sampler: " + self.sampler.version + "\n" \
"Timer: " + self.timer.version + "\n" \
"Config: " + self.config.version + "\n" \
"Logger: " + self.logger.version + "\n" \
"Sidfile: " + self.logger.sid_file.version + "\n" + \
"Viewer: " + self.viewer.version + "\n" + \
"\n\nAuthor: Eric Gibert [email protected]" + \
"\n\nVisit http://solar-center.stanford.edu/SID/sidmonitor/ for more information."
return msg
def __init__(self, config_file='', read_file=None):
self.version = "EG 1.4 20150801"
self.timer = None
self.sampler = None
self.viewer = None
# Read Config file here
print("Reading supersid.cfg ...", end='')
# this script accepts a .cfg file as optional argument else we default
# so that the "historical location" or the local path are explored
self.config = Config(config_file or "supersid.cfg")
# once the .cfg read, some sanity checks are necessary
self.config.supersid_check()
if not self.config.config_ok:
print("ERROR:", self.config.config_err)
exit(1)
else:
print(self.config.filenames) # good for debugging: what .cfg file(s) were actually read
self.config["supersid_version"] = self.version
# Create Logger - Logger will read an existing file if specified as -r|--read script argument
self.logger = Logger(self, read_file)
if 'utc_starttime' not in self.config:
self.config['utc_starttime'] = self.logger.sid_file.sid_params["utc_starttime"]
# Create the viewer based on the .cfg specification (or set default):
# Note: the list of Viewers can be extended provided they implement the same interface
if self.config['viewer'] == 'wx' and wx_imported:
# GUI Frame to display real-time VLF Spectrum based on wxPython
self.viewer = wxSidViewer(self)
elif self.config['viewer'] == 'tk':
# GUI Frame to display real-time VLF Spectrum based on tkinter (python 2 and 3)
self.viewer = tkSidViewer(self)
elif self.config['viewer'] == 'text':
# Lighter text version a.k.a. "console mode"
self.viewer = textSidViewer(self)
else:
print("ERROR: Unknown viewer", sid.config['viewer'])
exit(2)
# Assign desired psd function for calculation after capture
# currently: using matplotlib's psd
if (self.config['viewer'] == 'wx' and wx_imported) or self.config['viewer'] == 'tk':
self.psd = self.viewer.get_psd # calculate psd and draw result in one call
else:
self.psd = mlab_psd # calculation only
# calculate Stations' buffer_size
self.buffer_size = int(24*60*60 / self.config['log_interval'])
# Create Sampler to collect audio buffer (sound card or other server)
self.sampler = Sampler(self, audio_sampling_rate = self.config['audio_sampling_rate'], NFFT = 1024);
if not self.sampler.sampler_ok:
self.close()
exit(3)
else:
self.sampler.set_monitored_frequencies(self.config.stations);
# Link the logger.sid_file.data buffers to the config.stations
for ibuffer, station in enumerate(self.config.stations):
station['raw_buffer'] = self.logger.sid_file.data[ibuffer]
# Create Timer
self.viewer.status_display("Waiting for Timer ... ")
self.timer = SidTimer(self.config['log_interval'], self.on_timer)
def take_feature(part):
sample = Sampler(part, sample_rate=song.sample_rate)
sample.compute_features()
feature = sample.extract_features()
return feature
config["gru_unit_size"],
config["num_step"],
config["num_layers"],
save_path + env.spec.id,
global_step,
config["max_gradient_norm"],
config["entropy_bonus"],
writer,
loss_function=config["loss_function"],
summary_every=10)
sampler = Sampler(pg_rnn,
env,
config["gru_unit_size"],
config["num_step"],
config["num_layers"],
config["max_step"],
config["batch_size"],
config["discount"],
writer)
reward = []
for _ in tqdm(range(config["num_itr"])):
if train:
batch = sampler.samples()
pg_rnn.update_parameters(batch["observations"], batch["actions"],
batch["returns"], batch["init_states"],
batch["seq_len"])
else:
episode = sampler.collect_one_episode(render=True)
print("reward is {0}".format(np.sum(episode["rewards"])))
from git_module import GitModule
def restart(config):
git_module = GitModule( url = config.getRepoURL() )
git_module.checkout( config.getGitRef( ) )
git_module.runTests( "tests/run_tests" )
#git_module.install( )
#os.fork+++
#choose one of the following depending on how your SDS is connected
#ser = serial.Serial('/dev/tty.wchusbserial1430', baudrate=9600, stopbits=1, parity="N", timeout=2)
#ser = serial.Serial('/dev/ttyUSB0', baudrate=9600, stopbits=1, parity="N", timeout=2)
#ser = serial.Serial('/dev/ttyAMA0', baudrate=9600, stopbits=1, parity="N", timeout=2)
config = DeviceConfig( config_file )
device_id = config.getDeviceID( )
client_pm10 = FriskbyClient(config , "%s_PM10" % device_id)
client_pm25 = FriskbyClient(config , "%s_PM25" % device_id)
sampler = Sampler( SDS011 , sample_time = SAMPLE_TIME , sleep_time = 0.50 )
while True:
data = sampler.collect( )
client_pm10.post( data[0].mean() )
client_pm25.post( data[1].mean() )
if config.updateRequired():
restart(config)
