def end_state():
try:
scriptSys.GENERAL['mode']= "STOP"
scriptSys.TIME_INIT = scriptSys.TIME
print "STOP"
# scriptSys.copy_report()
return
except Exception as e:
scriptSys.error_report(e,"end_state()")
def measure_state() :
try:
if scriptSys.TIME < maxTimeMeasure:
if scriptInc.measure() == 'FAIL':
erase_state()
else:
analysis_state()
# print "RUN"
return
except Exception as e:
scriptSys.error_report(e,"zmeasure_state()")
def stress_test() :
try:
if scriptSys.GENERAL['mode'] != 'STRESS' : #si es llamado por 1
scriptSys.GENERAL['mode'] = 'STRESS'
scriptSys.TIME_INIT = scriptSys.TIME
scriptSys.AUX['testnr'] = str(int(scriptSys.AUX['testnr'])+1)
scriptSys.AUX['strike'] = 0
scriptSys.AUX['strikeh'] = 0
print "PAUSE"
return
#condiciones de Fallas:
if scriptSys.VOLTAGE < lowVoltageLimit : #si actula la proteccion cargo la Batery
scriptSys.AUX['Dropdown voltage T='+ str(scriptSys.TIME)] =scriptSys.VOLTAGE
# scriptSys.send_msg('Dropdown voltage T='+ str(scriptSys.TIME))
scriptSys.final_report("SoHfail",0)
return
# if scriptSys.VOLTAGE < vMargin : #si actula la proteccion cargo la Batery
# scriptSys.GENERAL['mode'] = 'CHARGE'
# scriptSys.TIME_INIT = scriptSys.TIME
# print "CHARGE,"+ vCharge1 +","+ iCharge1
# return
if scriptSys.CURRENT > (-iMargin) and scriptSys.VOLTAGE < vMargin :
scriptSys.AUX['F12'] =scriptSys.CURRENT
scriptSys.final_report("F12",0)
return
if (scriptSys.TIME - scriptSys.TIME_INIT) >= maxTimeInit:
slope1 = scriptSys.get_slope(range(scriptSys.TIME_INIT + 3,scriptSys.TIME))
if slope1['VOLTAGE'] > 80 and slope1['CURRENT'] > 180 :
scriptSys.AUX['F13 T='+ str(scriptSys.TIME)] =slope1
# scriptSys.send_msg('F13 T='+ str(scriptSys.TIME))
scriptSys.final_report("F13",0)
return
if (scriptSys.TIME - scriptSys.TIME_INIT) >= tMaxStress:
scriptSys.AUX['F12'] =(scriptSys.TIME - scriptSys.TIME_INIT)
scriptSys.final_report("F15",0)
return
######################################
actual_time = (scriptSys.TIME - scriptSys.TIME_INIT)
scriptSys.AUX['actual_time'] = actual_time
if actual_time >= (tTestC3- tMargin)and actual_time <(tTestC3 + tMargin):
msj = evaluate()
return
if actual_time >=(tTestB3 - tMargin)and actual_time <(tTestB3 + tMargin):
print "PAUSE"
return
if actual_time >=(tTestA3 - tMargin)and actual_time <(tTestA3 + tMargin):
print "DISCHARGE,"+ iDischargeTest2
return
print "RUN"
return
except Exception as e:
scriptSys.error_report(e,"stress_test()")
def analysis():
try:
if scriptSys.SCRIPT[
'mode'] != 'ANALYSIS': #si es llamado por primera vez
scriptSys.SCRIPT['mode'] = 'ANALYSIS'
scriptSys.TIME_INIT = scriptSys.TIME
if evaluate() == 'OK':
scriptSys.ANALYSIS['analysisstate'] = 'OK'
else:
scriptSys.ANALYSIS['analysisstate'] = 'FAIL'
return 'DONE'
except Exception as e:
scriptSys.error_report(e, "analysis()")
def init_state() :
try:
if int(scriptSys.TIME) >= maxTimeInit :
#condiciones inciales:
if scriptSys.CURRENT < (iMargin):
scriptSys.AUX['failcode'] = 3
scriptSys.final_report('FAIL_A',int(scriptSys.AUX['failcode']))
return
##############################
measure_state()
return
##############################
print "RUN"
return
except Exception as e:
scriptSys.error_report(e,"init_state()")
def init_state():
try:
if int(scriptSys.TIME) >= maxTimeInit:
if scriptSys.VOLTAGE > VALTA: scriptSys.GENERAL['vstate'] = "vALTA"
if scriptSys.VOLTAGE < VBAJA: scriptSys.GENERAL['vstate'] = "vBAJA"
else: scriptSys.GENERAL['vstate'] = "vMEDIA"
if scriptSys.CURRENT > iMargin or scriptSys.CURRENT < (-iMargin):
scriptSys.final_report("F01", 0)
return
if scriptSys.CURRENT < (2 * iMargin):
charge_state(0)
return
print "RUN"
return
except Exception as e:
scriptSys.error_report(e, "init_state()")
def inform():
try:
if scriptSys.SCRIPT['mode'] != 'INFORM': #si es llamado por primera vez
scriptSys.SCRIPT['mode'] = 'INFORM'
scriptSys.TIME_INIT = scriptSys.TIME
if scriptSys.DEV['datastate'] == 'OK':
if scriptSys.ANALYSIS['erasestate'] == 'OK':
if scriptSys.ANALYSIS['analysisstate'] == 'OK':
scriptSys.final_report('SUCCESS_A', 0)
elif scriptSys.ANALYSIS['analysisstate'] == 'FAIL':
scriptSys.final_report('FAIL_A',
int(scriptSys.AUX['failcode']))
else:
scriptSys.final_report('FAIL_Z',
int(scriptSys.AUX['failcode']))
elif scriptSys.ANALYSIS['erasestate'] == 'FAIL':
if scriptSys.ANALYSIS['analysisstate'] == 'OK':
scriptSys.final_report('FAIL_B', 0)
elif scriptSys.ANALYSIS['analysisstate'] == 'FAIL':
scriptSys.final_report('FAIL_C',
int(scriptSys.AUX['failcode']))
else:
scriptSys.final_report('FAIL_Y',
int(scriptSys.AUX['failcode']))
elif scriptSys.DEV['datastate'] == 'FAIL':
if scriptSys.ANALYSIS['analysisstate'] == 'OK':
scriptSys.final_report('FAIL_D', 0)
elif scriptSys.ANALYSIS['analysisstate'] == 'FAIL':
scriptSys.final_report('FAIL_E',
int(scriptSys.AUX['failcode']))
else:
scriptSys.final_report('FAIL_X',
int(scriptSys.AUX['failcode']))
else:
scriptSys.final_report('FAIL_W',
int(scriptSys.AUX['failcode']))
if (scriptSys.TIME - scriptSys.TIME_INIT) >= maxTimeInform:
print "STOP"
return
print "RUN"
return
except Exception as e:
scriptSys.error_report(e, "inform()")
def measure():
try:
if scriptSys.SCRIPT[
'mode'] != 'MEASURE': #si es llamado por primera vez
scriptSys.SCRIPT['mode'] = 'MEASURE'
scriptSys.TIME_INIT = scriptSys.TIME
scriptSys.ANALYSIS['analysisstate'] = 'RUNNING'
# return 'DONE'
######
# condiciones de carga del telefono
######
if evaluate_rt() == 'FAIL':
scriptSys.AUX['failcode']
return 'FAIL'
print 'RUN'
return 'DONE'
except Exception as e:
scriptSys.error_report(e, "measure()")
def already_charged(option):
try:
if scriptSys.GENERAL['mode'] != 'END': #si es llamado por primera vez
scriptSys.GENERAL['mode'] = 'END'
scriptSys.TIME_INIT = scriptSys.TIME
print "STOP,NTF,100,0"
scriptSys.GUI['line1'] = "Analysis Finished"
if option == 1:
scriptSys.GUI['line2'] = "Batery low voltage :" \
+ str(scriptSys.VOLTAGE) + 'V'
if option == 2:
scriptSys.GUI['line2'] = "Batery already DISCHARGED :" \
+ str(scriptSys.VOLTAGE) + 'V'
scriptSys.GUI['bgcolor'] = '"120,244,183"'
scriptSys.GUI['extra_info'] = " Z1="+scriptSys.EVAL['int_z1'] \
+" Z2="+scriptSys.EVAL['int_z2']
scriptSys.copy_report()
return
except Exception as e:
scriptSys.error_report(e, "already_charged()")
def erase():
try:
if scriptSys.SCRIPT['mode'] != 'ERASE': #si es llamado por primera vez
scriptSys.SCRIPT['mode'] = 'ERASE'
scriptSys.TIME_INIT = scriptSys.TIME
print "ERASE"
return 'NO'
if scriptSys.ANALYSIS['erasestate'] == 'OK':
return 'DONE'
if scriptSys.ANALYSIS['erasestate'] == 'FAIL':
return 'DONE'
# scriptSys.send_msg(str((scriptSys.TIME - scriptSys.TIME_INIT)))
if scriptSys.ANALYSIS['erasestate'] == 'RUNNING' or scriptSys.ANALYSIS[
'erasestate'] == 'NO':
if (scriptSys.TIME - scriptSys.TIME_INIT) >= maxTimeErase:
scriptSys.ANALYSIS['erasestate'] = 'FAIL'
return 'DONE'
print "RUN"
return
except Exception as e:
scriptSys.error_report(e, "erase()")
def discharge_state(number) :
try:
if not scriptSys.GENERAL['mode'] == 'DISCHARGE' : #si es llamado por 1
scriptSys.GENERAL['mode'] = 'DISCHARGE'
scriptSys.TIME_INIT = scriptSys.TIME
if number == 1 : print "DISCHARGE,"+ iDischarge1
if number == 2 : print "DISCHARGE,"+ iDischarge2
if number == 3 : print "DISCHARGE,"+ iDischarge3
return
if scriptSys.VOLTAGE < (umbralVoltTarget - umbralVolt) \
and (scriptSys.TIME - scriptSys.TIME_INIT) >= minTimeDischarge:
cond_state()
return
if (int(scriptSys.TIME) - int(scriptSys.TIME_INIT)) >= maxTimeDischarge:
scriptSys.final_report("maxTimeDischarge")
return
print "RUN"
return
except:
scriptSys.error_report("discharge_state()")
def get_line(dType, tLapse):
try:
n = len(tLapse)
if len(tLapse)%2 == 1:
tLapse.pop()
n = len(tLapse)
var = scriptSys.get_data(dType, tLapse)
VAR = sum(var) / float(len(var)) #promedio
m = []
m_aux = []
for x in range(0 , n , 2):
m_aux.append((var[x]+var[x+1])/2)
for x in range((n/2)-1):
m.append((m_aux[x+1]-m_aux[x])/2)
M = sum(m) / float(len(m)) #promedio
VAR1 = VAR + M *(n/2)
if scriptSys.DEBUG_MODE : scriptDebug.plot_line(dType,M,VAR1,tLapse[-1])
scriptSys.GENERAL['line_m'] = str(M)
scriptSys.GENERAL['line_m'] = str(VAR1)
return
except:
scriptSys.error_report("get_line()")
def evaluate() :
try:
capacityVectoAmps = 0
capacityVectorAh = 0
capacityVectoWatt = 0
for line in scriptSys.data:
i = int(line['CURRENT'])
t = int(line['TIME'])
if i >= (iDischTest1 - iMar) and i <=(iDischTest1 + iMar) \
and (t > scriptSys.TIME_INIT):
capacityVectoAmps += int(line['CURRENT'])
capacityVectoWatt += int(line['CURRENT']) * int(line['VOLTAGE'])
capacityAh = int(capacityVectoAmps / (1000*3600)) #/1000x mAmp y 3600xHr
capacityWh = int(capacityVectoAmps / (1000000*3600))
# scriptSys.import_data()
result = (scriptSys.TIME - scriptSys.TIME_INIT)
#regresion lineal
SoH = int((result * slope + origin)/1000)
scriptSys.final_report("sohAW",SoH,capacityAh,capacityWh)
return
except:
scriptSys.error_report("evaluate()")
def init_state() :
try:
if scriptSys.TIME >= maxTimeInit and scriptSys.VOLTAGE > vMargin:
scriptInc.measure_z1()
return
if scriptSys.TIME >= maxTimeInitFail and scriptSys.VOLTAGE <= vMargin:
scriptSys.final_report("F01",0)
return
# if scriptSys.VOLTAGE <= umbralVoltLow:
# charge_state(1)
# return
# if scriptSys.VOLTAGE > umbralVoltLow:
# stress_state()
# return
#
# if scriptSys.VOLTAGE < umbralVoltHigh and \
# scriptSys.VOLTAGE > umbralVoltLow:
# stress_state()
# return
print "RUN"
return
except:
scriptSys.error_report("init_state()")
def stress_test() :
try:
if scriptSys.GENERAL['mode'] != 'STRESS' : #si es llamado por 1
scriptSys.GENERAL['mode'] = 'STRESS'
scriptSys.TIME_INIT = scriptSys.TIME
print "DISCHARGE,"+ iDischargeTest1
return
if scriptSys.VOLTAGE <= vMargin:
scriptSys.final_report("maxTimeInitFail",0)
return
if scriptSys.VOLTAGE <= lowVoltageLimit: #si actula la proteccion cargo la Batery
evaluate()
return
actual_time = (scriptSys.TIME - scriptSys.TIME_INIT)
if actual_time >= tMaxStress :
scriptSys.final_report("tMaxStress",0)
return
print "RUN"
return
except:
scriptSys.error_report("stress_test()")
def charge_state(number) :
try:
if not scriptSys.GENERAL['mode'] == 'CHARGE' : #si es llamado por 1 vez
scriptSys.GENERAL['mode'] = 'CHARGE'
scriptSys.TIME_INIT = scriptSys.TIME
# if (umbralVoltTarget - scriptSys.VOLTAGE) <(0.1*umbralVoltTarget):
# number = 4
# elif (umbralVoltTarget -scriptSys.VOLTAGE)<(0.2*umbralVoltTarget):
# number = 3
# elif (umbralVoltTarget -scriptSys.VOLTAGE)<(0.4*umbralVoltTarget):
# number = 2
# else:
# number = 1
# if number == 4 : print "CHARGE,"+ vCharge4 +","+ iCharge4
# if number == 3 : print "CHARGE,"+ vCharge3 +","+ iCharge3
# if number == 1 :
print "CHARGE,"+ vCharge1 +","+ iCharge1
return
if scriptSys.VOLTAGE < (int(1000*float(vCharge2)) + vMargin) and \
scriptSys.VOLTAGE > (int(1000*float(vCharge2)) - vMargin) and \
scriptSys.CURRENT < vMargin:
scriptSys.final_report(0)
if scriptSys.CURRENT <= (umbralCurrentTarget) and \
(scriptSys.TIME - scriptSys.TIME_INIT) >= minTimeCharge:
cond_state()
return
if (int(scriptSys.TIME) - int(scriptSys.TIME_INIT)) >= maxTimeCharge :
scriptSys.final_report("maxTimeCharge")
return
# print "RUN"
print "CHARGE,"+ vCharge2 +","+ iCharge2
return
except:
scriptSys.error_report("charge_state()")
def cond_state():
try:
if not scriptSys.GENERAL['mode'] == 'CONDITIONING' : #es llamado por 1
scriptSys.GENERAL['mode'] = 'CONDITIONING'
scriptSys.TIME_INIT = scriptSys.TIME
print "PAUSE"
return
if ((scriptSys.TIME) - (scriptSys.TIME_INIT)) >= (maxTimeCond-tMargin):
stress_state()
return
if scriptSys.VOLTAGE < (int(1000*float(vCharge2)) + vMargin) and \
scriptSys.VOLTAGE > (int(1000*float(vCharge2)) - vMargin) and \
scriptSys.CURRENT < vMargin:
scriptSys.final_report(0)
# if scriptSys.VOLTAGE < umbralVoltLow:
# charge_state(2)
# scriptSys.ini_Update()
# sys.exit()
# return
#
# scriptInc.already_charged()
# if scriptSys.VOLTAGE > umbralVoltHigh:
# discharge_state(2)
# scriptSys.ini_Update()
# sys.exit()
# if scriptSys.VOLTAGE < umbralVoltHigh and \
# scriptSys.VOLTAGE > umbralVoltLow:
# scriptInc.measure_z1()
# scriptSys.ini_Update()
# sys.exit()
print "RUN"
return
except:
scriptSys.error_report("cond_state()")
def evaluate():
try:
scriptSys.import_data()
scriptSys.data = scriptSys.data[10:-10]
i = []
for line in scriptSys.data:
i.append(int(line['I0']))
w = 20
for x in range(w + 1, len(i)):
iavew = sum(i[x - w:x - 1]) / float(len(i[x - w:x - 1]))
if (iavew - i[x]) > 100:
scriptSys.AUX['failcode'] = 1
return 'FAIL'
iave = sum(i) / float(len(i))
if iave < 600 and iave > 400:
scriptSys.AUX['failcode'] = 2
return 'FAIL'
if iave < 200:
scriptSys.AUX['failcode'] = 3
return 'FAIL'
return 'OK'
except Exception as e:
scriptSys.error_report(e, "evaluate()")
print "CHARGE,4.2,1.8"
return
if actual_time >= 90:
print "PAUSE"
return
if actual_time >= 60:
print "DISCHARGE,1.5"
return
if actual_time >= 30:
>>>>>>> Bat Activate
print "PAUSE"
return
print "RUN"
return
except:
scriptSys.error_report("measure_z1()")
################################################################
########## measure_z2 ##########
################################################################
#Setup
tTest12 = 30 #tiempo de descarga suave
tTest22 = 60 #tiempo de descarga fuerte
tTest32 = 60 #tiempo de recuperacion
tTest42 = 20 #tiempo de chequeo e incio de sig etapa
tTest52 = 20
# tMargin = 5 #margen de tiempo por no ser 10s exactos
voltageAverage = 3
currentAverage = 5
Z1 = 0
Z2 = 0
tTestA2 = tTest12
def pause_state():
try:
print "RUN"
return
except Exception as e:
scriptSys.error_report(e, "pause_state()")
def stress_state():
try:
scriptInc.stress_test()
return
except Exception as e:
scriptSys.error_report(e, "stress_state()")
def zmeasure2_state():
try:
scriptInc.measure_z2()
return
except Exception as e:
scriptSys.error_report(e, "zmeasure2_state()")
def stress_state():
try:
scriptInc.stress_test()
return
except:
scriptSys.error_report("stress_state()")
def evaluate():
try:
scriptSys.import_data()
flag1 = True
flag2 = False
flag3 = False
flag4 = False
var = []
cur = []
for line in scriptSys.data:
i = int(line['CURRENT'])
t = int(line['TIME'])
s = int(line['STATUS'])
if s == 3 and flag1 and (t > scriptSys.TIME_INIT):
flag1 = False
ind = scriptSys.data.index(line) - 1
Vi0 = int(scriptSys.data[ind - 1]['VOLTAGE'])
Vi0 += int(scriptSys.data[ind - 2]['VOLTAGE'])
Vi0 += int(scriptSys.data[ind - 3]['VOLTAGE'])
Vi0 += int(scriptSys.data[ind - 4]['VOLTAGE'])
Vi0 += int(scriptSys.data[ind - 5]['VOLTAGE'])
Vi0 /= 5 #promedio de las ultimas 5 muestas antes de la descarga
t0 = int(line['TIME']) #tiempo de inicio de la descarga
flag2 = True
if s == 4 and flag2 and (t > scriptSys.TIME_INIT):
flag2 = False
ind = scriptSys.data.index(line) + 1
Vf0 = int(scriptSys.data[ind + 1]['VOLTAGE'])
Vf0 += int(scriptSys.data[ind + 2]['VOLTAGE'])
Vf0 += int(scriptSys.data[ind + 3]['VOLTAGE'])
Vf0 += int(scriptSys.data[ind + 4]['VOLTAGE'])
Vf0 += int(scriptSys.data[ind + 5]['VOLTAGE'])
Vf0 /= 5 #promedio de las ultimas 5 muestas antes de la descarga
Vd1 = Vi0 - int(scriptSys.data[ind + 0]['VOLTAGE'])
Vd2 = Vi0 - int(scriptSys.data[ind + 16]['VOLTAGE'])
flag3 = True
if s == 3 and (t > scriptSys.TIME_INIT
): #tomo las tensiones durante la descarga
var.append(int(line['VOLTAGE']))
cur.append(int(line['CURRENT']))
#regresion lineal
testnr = int(scriptSys.AUX['testnr'])
if testnr == 1:
origin = org
if testnr == 2:
origin = org - 9000
if testnr == 3:
origin = org - 10000
if testnr == 4:
origin = org - 10000
if testnr == 5:
origin = org - 11000
result = factor1 * Vd1 + factor2 * Vd2
SoH = int((result * slopeP + origin) / 1000)
current = sum(cur) / len(cur)
Zint = int((float(float(Vf0 - Vi0)) / float(current)) * 1000)
scriptSys.AUX['current' + str(testnr)] = current
scriptSys.AUX['Vf0' + str(testnr)] = Vf0
scriptSys.AUX['Vi0' + str(testnr)] = Vi0
scriptSys.AUX['Zint' + str(testnr)] = Zint
# scriptSys.send_msg('SoH'+str(testnr)+":"+str(SoH))
######################################################
#evaluacion de repetir el test
# t0 -= len(var)
######################################################
Va = 20 #pico negativo maximo en la descarga
Vam = 250
#caso A
ave = sum(var[5:20]) / len(var[5:20])
t = 0
for v in var[0:5]:
t += 1
if (ave - v) > Va:
scriptSys.AUX['casoA_t' + str(t0 + t - 1)] = (ave - v)
if int(scriptSys.AUX['strike']) >= 1:
if (t0 + t - 1) - int(scriptSys.AUX['striket']) >= 30:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
else:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
# scriptSys.send_msg('casoA tiempo: '+ str(t0 + t -1))
if (ave - v) > Vam:
scriptSys.AUX['casoAm_t' + str(t0 + t - 1)] = (ave - v)
scriptSys.AUX['strike'] = str(int(scriptSys.AUX['strike']) + 1)
# scriptSys.send_msg('casoA tiempo: '+ str(t0 + t -1))
scriptSys.final_report("SoHfail", SoH)
return
######################################################
Vb = 50 #caida promedio maxima en la descarga
Vbm = 300
#caso B
w = 10
t = 5
for x in range(5 + w, len(var) - 5 - w):
t += 1
ave = sum(var[x - w:x]) / len(var[x - w:x])
if (ave - var[x]) > Vb:
scriptSys.AUX['casoB_t' + str(t0 + t + w)] = (ave - var[x])
# scriptSys.send_msg('casoB tiempo: '+ str(t0 + t +w))
if int(scriptSys.AUX['strike']) >= 1:
if (t0 + t - 1) - int(scriptSys.AUX['striket']) >= 30:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
else:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
if (ave - var[x]) > Vbm:
scriptSys.AUX['casoBm_t' + str(t0 + t + w)] = (ave - var[x])
scriptSys.AUX['strike'] = str(int(scriptSys.AUX['strike']) + 1)
# scriptSys.send_msg('casoB tiempo: '+ str(t0 + t +w))
scriptSys.final_report("SoHfail", SoH)
return
######################################################
Vc = 20
Vcm = 200
#caso C
ave = sum(var[-25:-5]) / len(var[-25:-5])
t = len(var[:-25])
for v in var[-5:]:
t += 1
if (ave - v) > Vc:
scriptSys.AUX['casoC_t' + str(t0 + t - 1)] = (ave - v)
# scriptSys.send_msg('casoC tiempo: '+ str(t0 + t -1))
if int(scriptSys.AUX['strike']) >= 1:
if (t0 + t - 1) - int(scriptSys.AUX['striket']) >= 30:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
else:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
if (ave - v) > Vcm:
scriptSys.AUX['casoCm_t' + str(t0 + t + w)] = (ave - v)
# scriptSys.send_msg('casoC tiempo: '+ str(t0 + t -1))
scriptSys.AUX['strike'] = str(int(scriptSys.AUX['strike']) + 1)
scriptSys.final_report("SoHfail", SoH)
return
######################################################
Vdm = 2800 #tension de caida maxima
#caso D
t = 0
for v in var:
t += 1
if v < Vdm:
scriptSys.AUX['casoDm_t' + str(t0 + t - 1)] = v
# scriptSys.send_msg('casoD tiempo: '+ str(t0 + t -1))
scriptSys.final_report("SoHfail", SoH)
return
######################################################
#caso E
p = 0 #evaluacion de pendiente positiva
t = 0
for x in range(20, len(var) - 10):
p += var[x + 1] - var[x]
t += 1
if p > 16:
# scriptSys.send_msg('casoE pendiente: '+ str(p))
scriptSys.AUX['casoE_t' + str(t0 + t - 1)] = p
if int(scriptSys.AUX['strike']) >= 1:
if (t0 + t - 1) - int(scriptSys.AUX['striket']) >= 30:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
else:
scriptSys.AUX['strike'] = str(int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
######################################################
#casoF
w = 30 #evaluacion de caida de promedio
t = 15
for x in range(5 + w, len(var) - 5 - w):
t += 1
p = 0
for y in range(w):
p += var[x + y] - var[x + y + 1]
# print var[x]
if p > 132:
# scriptSys.send_msg('casoF pendiente: '+ str(p)+ ' tiempo: '+ str(t0 + t +w))
scriptSys.AUX['casoF_t' + str(t0 + t - 1)] = p
if int(scriptSys.AUX['strike']) >= 1:
if (t0 + t - 1) - int(scriptSys.AUX['striket']) >= 30:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
else:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
######################################################
#evaluacion de strikes
strike = int(scriptSys.AUX['strike'])
scriptSys.AUX['strikeh'] = int(scriptSys.AUX['strikeh']) + strike
# if strike >= 3 or strikeh >= 3:
strikeh = int(scriptSys.AUX['strikeh'])
# scriptSys.final_report("SoHfail",SoH)
if strikeh >= 3:
scriptSys.final_report("SoHfail", SoH)
return
#evaluacion de repetir el test
# if testnr >= 2:
# soh1 = int(scriptSys.AUX['soh'+str(testnr-1)])
# # if abs(soh1-int(SoH)) < 20 and strike == 0:
# if abs(int(soh1)-int(SoH)) < 10:
# if (soh1+int(SoH))/2 > (Boundary + Bmargin):
# scriptSys.final_report("SoHok",SoH)
# return
# if (soh1+int(SoH))/2 < (Boundary - Bmargin):
# scriptSys.final_report("SoHfail",SoH)
# return
# if testnr >= 5:
# if (soh1+int(SoH))/2 >= (Boundary):
# scriptSys.final_report("SoHok",SoH)
# return
# if (soh1+int(SoH))/2 < (Boundary):
# scriptSys.final_report("SoHfail",SoH)
# return
if Zint > Z_BOUNDARY:
scriptSys.final_report("SoHok", Zint)
else:
scriptSys.final_report("SoHok", Zint)
scriptSys.AUX['strike'] = 0
scriptSys.TIME_INIT = scriptSys.TIME
scriptSys.AUX['testnr'] = str(int(scriptSys.AUX['testnr']) + 1)
print "RUN"
return
except Exception as e:
scriptSys.error_report(e, "evaluate()")
def evaluate_rt():
try:
return 'OK'
except Exception as e:
scriptSys.error_report(e, "evaluatert()")
def charge_state(number) :
try:
if not scriptSys.GENERAL['mode'] == 'CHARGE' : #si es llamado por 1 vez
scriptSys.GENERAL['mode'] = 'CHARGE'
scriptSys.TIME_INIT = scriptSys.TIME
print "CHARGE,"+ vCharge1 +","+ iCharge1
return
if scriptSys.CURRENT < iMargin and \
scriptSys.VOLTAGE > (int(1000*float(vCharge2))-100) :
scriptSys.AUX['F03t'] =scriptSys.VOLTAGE
scriptSys.AUX['F03'] =scriptSys.TIME
scriptSys.final_report("F03",0)
return
if (scriptSys.TIME - scriptSys.TIME_INIT) <= maxTimeInit:
print "CHARGE,"+ vCharge2 +","+ iCharge2
return
if scriptSys.CURRENT < (umbralCurrentTarget) and \
(scriptSys.TIME - scriptSys.TIME_INIT) >= minTimeCharge:
cond_state()
return
#condiciones de Fallas:
if scriptSys.CURRENT < iMargin :
scriptSys.AUX['F02t'] =scriptSys.CURRENT
scriptSys.AUX['F02'] =scriptSys.TIME
scriptSys.final_report("F02",0)
return
if (scriptSys.TIME - scriptSys.TIME_INIT) >= maxTimeInit:
slope = scriptSys.get_slope(range(scriptSys.TIME_INIT + 10,scriptSys.TIME))
if scriptSys.GENERAL['vstate'] == "vBAJA" and not slope['VOLTAGE'] > -80 \
and scriptSys.CURRENT > (int(1000*float(iCharge2))-200):
scriptSys.AUX['F04t'] =scriptSys.CURRENT
scriptSys.AUX['F04'] =scriptSys.TIME
scriptSys.final_report("F04",0)
return
if scriptSys.GENERAL['vstate'] == "vMEDIA" and not slope['VOLTAGE'] > -80\
and scriptSys.CURRENT > (int(1000*float(iCharge2))-200):
scriptSys.AUX['F05t'] =slope['VOLTAGE']
scriptSys.AUX['F05'] =scriptSys.TIME
scriptSys.final_report("F05",0)
return
if scriptSys.GENERAL['vstate'] == "vALTA" and not slope['CURRENT'] < 80\
and scriptSys.VOLTAGE > (int(1000*float(vCharge2))-200):
scriptSys.AUX['F06t'] =slope['CURRENT']
scriptSys.AUX['F06'] =scriptSys.TIME
scriptSys.final_report("F06",0)
return
# if slope['VOLTAGE'] > 0 and slope['CURRENT'] < 0 :
# scriptSys.AUX['F07'] =slope['CURRENT']
# scriptSys.AUX['F07t'] =scriptSys.TIME
# scriptSys.final_report("F07",0)
# return
if slope['VOLTAGE'] < 0 :
scriptSys.AUX['F08t'] =slope['VOLTAGE']
scriptSys.AUX['F04'] =scriptSys.TIME
scriptSys.final_report("F08",0)
return
if (scriptSys.TIME - scriptSys.TIME_INIT) >= maxTimeChargeLow and \
scriptSys.GENERAL['vstate'] == "vBAJA" :
scriptSys.AUX['F09t'] =(scriptSys.TIME - scriptSys.TIME_INIT)
scriptSys.AUX['F04'] =scriptSys.TIME
scriptSys.final_report("F09",0)
return
if (scriptSys.TIME - scriptSys.TIME_INIT) >= maxTimeChargeMed and \
scriptSys.GENERAL['vstate'] == "vMEDIA" :
scriptSys.AUX['F10t'] =(scriptSys.TIME - scriptSys.TIME_INIT)
scriptSys.AUX['F04'] =scriptSys.TIME
scriptSys.final_report("F10",0)
return
if (scriptSys.TIME - scriptSys.TIME_INIT) >= maxTimeChargeHig and \
scriptSys.GENERAL['vstate'] == "vALTA" :
scriptSys.AUX['F11t'] =(scriptSys.TIME - scriptSys.TIME_INIT)
scriptSys.AUX['F04'] =scriptSys.TIME
scriptSys.final_report("F11",0)
return
print "RUN"
return
except Exception as e:
scriptSys.error_report(e,"charge_state()")
def measure_z2():
try:
if scriptSys.GENERAL['mode'] != 'Z_MEASURE2': #si es llamado por 1
scriptSys.GENERAL['mode'] = 'Z_MEASURE2'
scriptSys.TIME_INIT = scriptSys.TIME
print "DISCHARGE,1.0"
return
actual_time = (scriptSys.TIME - scriptSys.TIME_INIT)
if actual_time >= tTestD2:
# deja reposar y chequea q no caiga la tension
# final_report(0,0)
# stress_test()
scriptSys.GENERAL['mode'] = 'CHARGE'
scriptSys.TIME_INIT = scriptSys.TIME
print "CHARGE,4.2,1.2"
# scriptTest.charge_state(1)
return
if actual_time >=(tTestC2 - tMargin) \
and actual_time <(tTestC2 + tMargin):
# print "DISCHARGE,1.0" Descarga fuerte
scriptSys.import_data()
#delay en el inicio de la descarga
t = scriptSys.TIME_INIT + tTestB2 + 2
var = scriptSys.get_data('VOLTAGE', \
range( t - 5 , t - 5 + voltageAverage))
#promedio de las mediciones al principio
V1 = sum(var) / float(len(var))
var = scriptSys.get_data('VOLTAGE', \
range( scriptSys.TIME - voltageAverage, scriptSys.TIME ))
#promedio de las mediciones al final del test
V2 = sum(var) / float(len(var))
var = scriptSys.get_data(
'CURRENT',
range(scriptSys.TIME - currentAverage, scriptSys.TIME))
#promedio de las mediciones al principio
I1 = sum(var) / float(len(var))
Z2 = int(((float(V2) - float(V1)) / float(I1)) * 1000)
scriptSys.EVAL['int_z2'] = str(Z2)
scriptSys.EVAL['int_z'] = str(Z2) #str(round(Z1,0))
# chequear rectas
print "PAUSE"
return
if actual_time >=(tTestB2 - tMargin) \
and actual_time <(tTestB2 + tMargin):
# deja reposar y chequea q no caiga la tension
# stress_test()
print "DISCHARGE,1.5"
return
if actual_time >= (tTestA2 - tMargin) \
and actual_time < (tTestA2 + tMargin) :
# print "DISCHARGE,0.2" Descarga suave
scriptSys.import_data()
t = scriptSys.TIME_INIT + 2 #delay en el inicio de la descarga
var = scriptSys.get_data('VOLTAGE', \
range( t - 5, t- 5 + voltageAverage))
#promedio de las mediciones al principio
V1 = sum(var) / float(len(var))
var = scriptSys.get_data('VOLTAGE', \
range( scriptSys.TIME - voltageAverage, scriptSys.TIME ))
#promedio de las mediciones al final del test
V2 = sum(var) / float(len(var))
var = scriptSys.get_data('CURRENT', \
range( scriptSys.TIME - currentAverage,scriptSys.TIME))
#promedio de las mediciones al principio
I1 = sum(var) / float(len(var))
Z1 = int(((float(V2) - float(V1)) / float(I1)) * 1000)
scriptSys.EVAL['int_z1'] = str(Z1) #str(round(Z1,3))
# chequear rectas
print "PAUSE"
return
print "RUN"
return
except Exception as e:
scriptSys.error_report(e, "measure_z2()")
def charge_state(number):
try:
if not scriptSys.GENERAL['mode'] == 'CHARGE': #si es llamado por 1 vez
scriptSys.GENERAL['mode'] = 'CHARGE'
scriptSys.TIME_INIT = scriptSys.TIME
print "CHARGE," + vCharge1 + "," + iCharge1
return
# if scriptSys.CURRENT < iMargin and \
# scriptSys.VOLTAGE > (int(1000*float(vCharge2))-100) :
# scriptSys.final_report("F03",0)
# return
if (scriptSys.TIME - scriptSys.TIME_INIT) <= maxTimeInit:
print "CHARGE," + vCharge2 + "," + iCharge2
return
if scriptSys.CURRENT < (umbralCurrentTarget) and \
(scriptSys.TIME - scriptSys.TIME_INIT) >= minTimeCharge:
if not scriptSys.GENERAL[
'mode'] == 'INIT': #si es llamado por 1 vez
scriptSys.GENERAL['mode'] = 'INIT'
scriptSys.GENERAL['entradas'] = '0'
testA()
# cond_state()
return
#condiciones de Fallas:
# if scriptSys.CURRENT < iMargin :
# scriptSys.final_report("F02",0)
# return
# if (scriptSys.TIME - scriptSys.TIME_INIT) >= maxTimeInit:
# slope = scriptSys.get_slope(range(scriptSys.TIME_INIT + 3,scriptSys.TIME))
# if scriptSys.GENERAL['vstate'] == "vBAJA" and not slope['VOLTAGE'] > -80 \
# and scriptSys.CURRENT > (int(1000*float(iCharge2))-200):
# scriptSys.final_report("F04",0)
# return
# if scriptSys.GENERAL['vstate'] == "vMEDIA" and not slope['VOLTAGE'] > -80\
# and scriptSys.CURRENT > (int(1000*float(iCharge2))-200):
# scriptSys.final_report("F05",0)
# return
# if scriptSys.GENERAL['vstate'] == "vALTA" and not slope['CURRENT'] < 80\
# and scriptSys.VOLTAGE > (int(1000*float(vCharge2))-200):
# scriptSys.final_report("F06",0)
# return
# if slope['VOLTAGE'] > 0 and slope['CURRENT'] < 80 :
# scriptSys.final_report("F07",0)
# return
# if slope['VOLTAGE'] < 100 :
# scriptSys.final_report("F08",0)
# return
# if (scriptSys.TIME - scriptSys.TIME_INIT) >= maxTimeChargeLow and \
# scriptSys.GENERAL['vstate'] == "vBAJA" :
# scriptSys.final_report("F09",0)
# return
# if (scriptSys.TIME - scriptSys.TIME_INIT) >= maxTimeChargeMed and \
# scriptSys.GENERAL['vstate'] == "vMEDIA" :
# scriptSys.final_report("F10",0)
# return
# if (scriptSys.TIME - scriptSys.TIME_INIT) >= maxTimeChargeHig and \
# scriptSys.GENERAL['vstate'] == "vALTA" :
# scriptSys.final_report("F11",0)
# return
print "RUN"
return
except Exception as e:
scriptSys.error_report(e, "charge_state()")
def pause_state():
try:
print "RUN"
return
except:
scriptSys.error_report("pause_state()")
def inform_state():
try:
scriptInc.inform()
return
except Exception as e:
scriptSys.error_report(e,"pause_state()")
