def controlsd_thread(sm=None, pm=None, can_sock=None): gc.disable() # start the loop set_realtime_priority(3) params = Params() is_metric = params.get("IsMetric", encoding='utf8') == "1" is_ldw_enabled = params.get("IsLdwEnabled", encoding='utf8') == "1" passive = params.get("Passive", encoding='utf8') == "1" openpilot_enabled_toggle = params.get("OpenpilotEnabledToggle", encoding='utf8') == "1" community_feature_toggle = params.get("CommunityFeaturesToggle", encoding='utf8') == "1" passive = passive or not openpilot_enabled_toggle # Passive if internet needed internet_needed = params.get("Offroad_ConnectivityNeeded", encoding='utf8') is not None passive = passive or internet_needed # Pub/Sub Sockets if pm is None: pm = messaging.PubMaster([ 'sendcan', 'controlsState', 'carState', 'carControl', 'carEvents', 'carParams' ]) if sm is None: sm = messaging.SubMaster(['thermal', 'health', 'liveCalibration', 'dMonitoringState', 'plan', 'pathPlan', \ 'model']) if can_sock is None: can_timeout = None if os.environ.get('NO_CAN_TIMEOUT', False) else 100 can_sock = messaging.sub_sock('can', timeout=can_timeout) # wait for health and CAN packets hw_type = messaging.recv_one(sm.sock['health']).health.hwType has_relay = hw_type in [HwType.blackPanda, HwType.uno] print("Waiting for CAN messages...") messaging.get_one_can(can_sock) CI, CP = get_car(can_sock, pm.sock['sendcan'], has_relay) car_recognized = CP.carName != 'mock' # If stock camera is disconnected, we loaded car controls and it's not chffrplus controller_available = CP.enableCamera and CI.CC is not None and not passive community_feature_disallowed = CP.communityFeature and not community_feature_toggle read_only = not car_recognized or not controller_available or CP.dashcamOnly or community_feature_disallowed if read_only: CP.safetyModel = car.CarParams.SafetyModel.noOutput # Write CarParams for radard and boardd safety mode cp_bytes = CP.to_bytes() params.put("CarParams", cp_bytes) put_nonblocking("CarParamsCache", cp_bytes) put_nonblocking("LongitudinalControl", "1" if CP.openpilotLongitudinalControl else "0") CC = car.CarControl.new_message() AM = AlertManager() startup_alert = get_startup_alert(car_recognized, controller_available) AM.add(sm.frame, startup_alert, False) LoC = LongControl(CP, CI.compute_gb) VM = VehicleModel(CP) if CP.lateralTuning.which() == 'pid': LaC = LatControlPID(CP) elif CP.lateralTuning.which() == 'indi': LaC = LatControlINDI(CP) elif CP.lateralTuning.which() == 'lqr': LaC = LatControlLQR(CP) state = State.disabled soft_disable_timer = 0 v_cruise_kph = 255 v_cruise_kph_last = 0 mismatch_counter = 0 can_error_counter = 0 last_blinker_frame = 0 saturated_count = 0 events_prev = [] sm['liveCalibration'].calStatus = Calibration.INVALID sm['pathPlan'].sensorValid = True sm['pathPlan'].posenetValid = True sm['thermal'].freeSpace = 1. sm['dMonitoringState'].events = [] sm['dMonitoringState'].awarenessStatus = 1. sm['dMonitoringState'].faceDetected = False # detect sound card presence sounds_available = not os.path.isfile('/EON') or ( os.path.isdir('/proc/asound/card0') and open('/proc/asound/card0/state').read().strip() == 'ONLINE') # controlsd is driven by can recv, expected at 100Hz rk = Ratekeeper(100, print_delay_threshold=None) prof = Profiler(False) # off by default while True: start_time = sec_since_boot() prof.checkpoint("Ratekeeper", ignore=True) # Sample data and compute car events CS, events, cal_perc, mismatch_counter, can_error_counter = data_sample( CI, CC, sm, can_sock, state, mismatch_counter, can_error_counter, params) prof.checkpoint("Sample") # Create alerts if not sm.alive['plan'] and sm.alive[ 'pathPlan']: # only plan not being received: radar not communicating events.append( create_event('radarCommIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE])) elif not sm.all_alive_and_valid(): events.append( create_event('commIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if not sm['pathPlan'].mpcSolutionValid: events.append( create_event('plannerError', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) if not sm['pathPlan'].sensorValid and os.getenv("NOSENSOR") is None: events.append( create_event('sensorDataInvalid', [ET.NO_ENTRY, ET.PERMANENT])) if not sm['pathPlan'].paramsValid: events.append(create_event('vehicleModelInvalid', [ET.WARNING])) if not sm['pathPlan'].posenetValid: events.append( create_event('posenetInvalid', [ET.NO_ENTRY, ET.WARNING])) if not sm['plan'].radarValid: events.append( create_event('radarFault', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if sm['plan'].radarCanError: events.append( create_event('radarCanError', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if not CS.canValid: events.append( create_event('canError', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) if not sounds_available: events.append( create_event('soundsUnavailable', [ET.NO_ENTRY, ET.PERMANENT])) if internet_needed: events.append( create_event('internetConnectivityNeeded', [ET.NO_ENTRY, ET.PERMANENT])) if community_feature_disallowed: events.append( create_event('communityFeatureDisallowed', [ET.PERMANENT])) if read_only and not passive: events.append(create_event('carUnrecognized', [ET.PERMANENT])) if log.HealthData.FaultType.relayMalfunction in sm['health'].faults: events.append( create_event( 'relayMalfunction', [ET.NO_ENTRY, ET.PERMANENT, ET.IMMEDIATE_DISABLE])) # Only allow engagement with brake pressed when stopped behind another stopped car if CS.brakePressed and sm[ 'plan'].vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3: events.append( create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) if not read_only: # update control state state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \ state_transition(sm.frame, CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM) prof.checkpoint("State transition") # Compute actuators (runs PID loops and lateral MPC) actuators, v_cruise_kph, v_acc, a_acc, lac_log, last_blinker_frame, saturated_count = \ state_control(sm.frame, sm.rcv_frame, sm['plan'], sm['pathPlan'], CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM, rk, LaC, LoC, read_only, is_metric, cal_perc, last_blinker_frame, saturated_count) prof.checkpoint("State Control") # Publish data CC, events_prev = data_send(sm, pm, CS, CI, CP, VM, state, events, actuators, v_cruise_kph, rk, AM, LaC, LoC, read_only, start_time, v_acc, a_acc, lac_log, events_prev, last_blinker_frame, is_ldw_enabled, can_error_counter) prof.checkpoint("Sent") rk.monitor_time() prof.display()
def controlsd_thread(gctx=None, rate=100): gc.disable() # start the loop set_realtime_priority(3) context = zmq.Context() params = Params() # Pub Sockets live100 = messaging.pub_sock(context, service_list['live100'].port) carstate = messaging.pub_sock(context, service_list['carState'].port) carcontrol = messaging.pub_sock(context, service_list['carControl'].port) is_metric = params.get("IsMetric") == "1" passive = params.get("Passive") != "0" # No sendcan if passive if not passive: sendcan = messaging.pub_sock(context, service_list['sendcan'].port) else: sendcan = None # Sub sockets poller = zmq.Poller() thermal = messaging.sub_sock(context, service_list['thermal'].port, conflate=True, poller=poller) health = messaging.sub_sock(context, service_list['health'].port, conflate=True, poller=poller) cal = messaging.sub_sock(context, service_list['liveCalibration'].port, conflate=True, poller=poller) driver_monitor = messaging.sub_sock(context, service_list['driverMonitoring'].port, conflate=True, poller=poller) plan_sock = messaging.sub_sock(context, service_list['plan'].port, conflate=True, poller=poller) path_plan_sock = messaging.sub_sock(context, service_list['pathPlan'].port, conflate=True, poller=poller) logcan = messaging.sub_sock(context, service_list['can'].port) CC = car.CarControl.new_message() CI, CP = get_car(logcan, sendcan, 1.0 if passive else None) if CI is None: raise Exception("unsupported car") # if stock camera is connected, then force passive behavior if not CP.enableCamera: passive = True sendcan = None if passive: CP.safetyModel = car.CarParams.SafetyModels.noOutput LoC = LongControl(CP, CI.compute_gb) VM = VehicleModel(CP) LaC = LatControl(CP) AM = AlertManager() driver_status = DriverStatus() if not passive: AM.add("startup", False) # Write CarParams for radard and boardd safety mode params.put("CarParams", CP.to_bytes()) params.put("LongitudinalControl", "1" if CP.openpilotLongitudinalControl else "0") state = State.disabled soft_disable_timer = 0 v_cruise_kph = 255 v_cruise_kph_last = 0 overtemp = False free_space = False cal_status = Calibration.INVALID cal_perc = 0 mismatch_counter = 0 low_battery = False plan = messaging.new_message() plan.init('plan') path_plan = messaging.new_message() path_plan.init('pathPlan') rk = Ratekeeper(rate, print_delay_threshold=2. / 1000) controls_params = params.get("ControlsParams") # Read angle offset from previous drive if controls_params is not None: controls_params = json.loads(controls_params) angle_offset = controls_params['angle_offset'] else: angle_offset = 0. prof = Profiler(False) # off by default while True: start_time = int(sec_since_boot() * 1e9) prof.checkpoint("Ratekeeper", ignore=True) # Sample data and compute car events CS, events, cal_status, cal_perc, overtemp, free_space, low_battery, mismatch_counter, plan, path_plan =\ data_sample(CI, CC, plan_sock, path_plan_sock, thermal, cal, health, driver_monitor, poller, cal_status, cal_perc, overtemp, free_space, low_battery, driver_status, state, mismatch_counter, params, plan, path_plan) prof.checkpoint("Sample") path_plan_age = (start_time - path_plan.logMonoTime) / 1e9 plan_age = (start_time - plan.logMonoTime) / 1e9 if not path_plan.pathPlan.valid or plan_age > 0.5 or path_plan_age > 0.5: events.append( create_event('plannerError', [ET.NO_ENTRY, ET.SOFT_DISABLE])) events += list(plan.plan.events) # Only allow engagement with brake pressed when stopped behind another stopped car if CS.brakePressed and plan.plan.vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3: events.append( create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) if not passive: # update control state state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \ state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM) prof.checkpoint("State transition") # Compute actuators (runs PID loops and lateral MPC) actuators, v_cruise_kph, driver_status, angle_offset, v_acc, a_acc = \ state_control(plan.plan, path_plan.pathPlan, CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM, rk, driver_status, LaC, LoC, VM, angle_offset, passive, is_metric, cal_perc) prof.checkpoint("State Control") # Publish data CC = data_send(plan, path_plan, CS, CI, CP, VM, state, events, actuators, v_cruise_kph, rk, carstate, carcontrol, live100, AM, driver_status, LaC, LoC, angle_offset, passive, start_time, params, v_acc, a_acc) prof.checkpoint("Sent") rk.keep_time() # Run at 100Hz prof.display()
def controlsd_thread(gctx, rate=100): # start the loop set_realtime_priority(2) context = zmq.Context() params = Params() # pub live100 = messaging.pub_sock(context, service_list['live100'].port) carstate = messaging.pub_sock(context, service_list['carState'].port) carcontrol = messaging.pub_sock(context, service_list['carControl'].port) livempc = messaging.pub_sock(context, service_list['liveMpc'].port) passive = params.get("Passive") != "0" if not passive: sendcan = messaging.pub_sock(context, service_list['sendcan'].port) else: sendcan = None # sub thermal = messaging.sub_sock(context, service_list['thermal'].port) health = messaging.sub_sock(context, service_list['health'].port) cal = messaging.sub_sock(context, service_list['liveCalibration'].port) logcan = messaging.sub_sock(context, service_list['can'].port) CC = car.CarControl.new_message() CI, CP = get_car(logcan, sendcan, 1.0 if passive else None) if CI is None: if passive: return else: raise Exception("unsupported car") if passive: CP.safetyModel = car.CarParams.SafetyModels.noOutput fcw_enabled = params.get("IsFcwEnabled") == "1" PL = Planner(CP, fcw_enabled) LoC = LongControl(CP, CI.compute_gb) VM = VehicleModel(CP) LaC = LatControl(VM) AM = AlertManager() if not passive: AM.add("startup", False) # write CarParams params.put("CarParams", CP.to_bytes()) state = State.DISABLED soft_disable_timer = 0 v_cruise_kph = 255 overtemp = False free_space = False cal_status = Calibration.UNCALIBRATED rear_view_toggle = False rear_view_allowed = params.get("IsRearViewMirror") == "1" # 0.0 - 1.0 awareness_status = 1. rk = Ratekeeper(rate, print_delay_threshold=2./1000) # learned angle offset angle_offset = 1.5 # Default model bias calibration_params = params.get("CalibrationParams") if calibration_params: try: calibration_params = json.loads(calibration_params) angle_offset = calibration_params["angle_offset"] except (ValueError, KeyError): pass prof = Profiler() while 1: prof.reset() # avoid memory leak # sample data and compute car events CS, events, cal_status, overtemp, free_space = data_sample(CI, CC, thermal, health, cal, cal_status, overtemp, free_space) prof.checkpoint("Sample") # define plan plan, plan_ts = calc_plan(CS, events, PL, LoC, v_cruise_kph, awareness_status) prof.checkpoint("Plan") if not passive: # update control state state, soft_disable_timer, v_cruise_kph = state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM) prof.checkpoint("State transition") # compute actuators actuators, v_cruise_kph, awareness_status, angle_offset, rear_view_toggle = state_control(plan, CS, CP, state, events, v_cruise_kph, AM, rk, awareness_status, PL, LaC, LoC, VM, angle_offset, rear_view_allowed, rear_view_toggle) prof.checkpoint("State Control") # publish data CC = data_send(plan, plan_ts, CS, CI, CP, state, events, actuators, v_cruise_kph, rk, carstate, carcontrol, live100, livempc, AM, rear_view_allowed, rear_view_toggle, awareness_status, LaC, LoC, angle_offset, passive) prof.checkpoint("Sent") # *** run loop at fixed rate *** if rk.keep_time(): prof.display()
def controlsd_thread(gctx=None): gc.disable() # start the loop set_realtime_priority(3) params = Params() # Pub Sockets sendcan = messaging.pub_sock(service_list['sendcan'].port) controlsstate = messaging.pub_sock(service_list['controlsState'].port) carstate = messaging.pub_sock(service_list['carState'].port) carcontrol = messaging.pub_sock(service_list['carControl'].port) carevents = messaging.pub_sock(service_list['carEvents'].port) carparams = messaging.pub_sock(service_list['carParams'].port) is_metric = params.get("IsMetric") == "1" passive = params.get("Passive") != "0" sm = messaging.SubMaster([ 'thermal', 'health', 'liveCalibration', 'driverMonitoring', 'plan', 'pathPlan' ]) logcan = messaging.sub_sock(service_list['can'].port) CI, CP = get_car(logcan, sendcan) logcan.close() # TODO: Use the logcan socket from above, but that will currenly break the tests can_sock = messaging.sub_sock(service_list['can'].port, timeout=100) CC = car.CarControl.new_message() AM = AlertManager() car_recognized = CP.carName != 'mock' # If stock camera is disconnected, we loaded car controls and it's not chffrplus controller_available = CP.enableCamera and CI.CC is not None and not passive read_only = not car_recognized or not controller_available if read_only: CP.safetyModel = car.CarParams.SafetyModel.elm327 # diagnostic only startup_alert = get_startup_alert(car_recognized, controller_available) AM.add(sm.frame, startup_alert, False) LoC = LongControl(CP, CI.compute_gb) VM = VehicleModel(CP) if CP.lateralTuning.which() == 'pid': LaC = LatControlPID(CP) else: LaC = LatControlINDI(CP) driver_status = DriverStatus() # Write CarParams for radard and boardd safety mode params.put("CarParams", CP.to_bytes()) params.put("LongitudinalControl", "1" if CP.openpilotLongitudinalControl else "0") state = State.disabled soft_disable_timer = 0 v_cruise_kph = 255 v_cruise_kph_last = 0 overtemp = False free_space = False cal_status = Calibration.INVALID cal_perc = 0 mismatch_counter = 0 low_battery = False events_prev = [] sm['pathPlan'].sensorValid = True # controlsd is driven by can recv, expected at 100Hz rk = Ratekeeper(100, print_delay_threshold=None) prof = Profiler(False) # off by default while True: start_time = sec_since_boot() prof.checkpoint("Ratekeeper", ignore=True) # Sample data and compute car events CS, events, cal_status, cal_perc, overtemp, free_space, low_battery, mismatch_counter =\ data_sample(CI, CC, sm, can_sock, cal_status, cal_perc, overtemp, free_space, low_battery, driver_status, state, mismatch_counter, params) prof.checkpoint("Sample") # Create alerts if not sm.all_alive_and_valid(): events.append( create_event('commIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if not sm['pathPlan'].mpcSolutionValid: events.append( create_event('plannerError', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) if not sm['pathPlan'].sensorValid: events.append( create_event('sensorDataInvalid', [ET.NO_ENTRY, ET.PERMANENT])) if not sm['pathPlan'].paramsValid: events.append(create_event('vehicleModelInvalid', [ET.WARNING])) if not sm['plan'].radarValid: events.append( create_event('radarFault', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if sm['plan'].radarCanError: events.append( create_event('radarCanError', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if not CS.canValid: events.append( create_event('canError', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) # Only allow engagement with brake pressed when stopped behind another stopped car if CS.brakePressed and sm[ 'plan'].vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3: events.append( create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) if not read_only: # update control state state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \ state_transition(sm.frame, CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM) prof.checkpoint("State transition") # Compute actuators (runs PID loops and lateral MPC) actuators, v_cruise_kph, driver_status, v_acc, a_acc, lac_log = \ state_control(sm.frame, sm.rcv_frame, sm['plan'], sm['pathPlan'], CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM, rk, driver_status, LaC, LoC, VM, read_only, is_metric, cal_perc) prof.checkpoint("State Control") # Publish data CC, events_prev = data_send(sm, CS, CI, CP, VM, state, events, actuators, v_cruise_kph, rk, carstate, carcontrol, carevents, carparams, controlsstate, sendcan, AM, driver_status, LaC, LoC, read_only, start_time, v_acc, a_acc, lac_log, events_prev) prof.checkpoint("Sent") rk.monitor_time() prof.display()
def controlsd_thread(gctx=None, rate=100, default_bias=0.): gc.disable() # start the loop set_realtime_priority(3) context = zmq.Context() params = Params() # pub live100 = messaging.pub_sock(context, service_list['live100'].port) carstate = messaging.pub_sock(context, service_list['carState'].port) carcontrol = messaging.pub_sock(context, service_list['carControl'].port) livempc = messaging.pub_sock(context, service_list['liveMpc'].port) is_metric = params.get("IsMetric") == "1" passive = params.get("Passive") != "0" if not passive: while 1: try: sendcan = messaging.pub_sock(context, service_list['sendcan'].port) break except zmq.error.ZMQError: kill_defaultd() else: sendcan = None # sub poller = zmq.Poller() thermal = messaging.sub_sock(context, service_list['thermal'].port, conflate=True, poller=poller) health = messaging.sub_sock(context, service_list['health'].port, conflate=True, poller=poller) cal = messaging.sub_sock(context, service_list['liveCalibration'].port, conflate=True, poller=poller) driver_monitor = messaging.sub_sock(context, service_list['driverMonitoring'].port, conflate=True, poller=poller) gps_location = messaging.sub_sock(context, service_list['gpsLocationExternal'].port, conflate=True, poller=poller) logcan = messaging.sub_sock(context, service_list['can'].port) CC = car.CarControl.new_message() CI, CP = get_car(logcan, sendcan, 1.0 if passive else None) if CI is None: raise Exception("unsupported car") # if stock camera is connected, then force passive behavior if not CP.enableCamera: passive = True sendcan = None if passive: CP.safetyModel = car.CarParams.SafetyModels.noOutput fcw_enabled = params.get("IsFcwEnabled") == "1" geofence = None PL = Planner(CP, fcw_enabled) LoC = LongControl(CP, CI.compute_gb) VM = VehicleModel(CP) LaC = LatControl(VM) AM = AlertManager() driver_status = DriverStatus() if not passive: AM.add("startup", False) # write CarParams params.put("CarParams", CP.to_bytes()) state = State.disabled soft_disable_timer = 0 v_cruise_kph = 255 v_cruise_kph_last = 0 overtemp = False free_space = False cal_status = Calibration.INVALID cal_perc = 0 mismatch_counter = 0 low_battery = False rk = Ratekeeper(rate, print_delay_threshold=2. / 1000) # learned angle offset angle_offset = default_bias calibration_params = params.get("CalibrationParams") if calibration_params: try: calibration_params = json.loads(calibration_params) angle_offset = calibration_params["angle_offset2"] except (ValueError, KeyError): pass prof = Profiler(False) # off by default while 1: prof.checkpoint("Ratekeeper", ignore=True) # sample data and compute car events CS, events, cal_status, cal_perc, overtemp, free_space, low_battery, mismatch_counter = data_sample( CI, CC, thermal, cal, health, driver_monitor, gps_location, poller, cal_status, cal_perc, overtemp, free_space, low_battery, driver_status, geofence, state, mismatch_counter, params) prof.checkpoint("Sample") # define plan plan, plan_ts = calc_plan(CS, CP, events, PL, LaC, LoC, v_cruise_kph, driver_status, geofence) prof.checkpoint("Plan") if not passive: # update control state state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \ state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM) prof.checkpoint("State transition") # compute actuators actuators, v_cruise_kph, driver_status, angle_offset = state_control( plan, CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM, rk, driver_status, PL, LaC, LoC, VM, angle_offset, passive, is_metric, cal_perc) prof.checkpoint("State Control") # publish data CC = data_send(PL.perception_state, plan, plan_ts, CS, CI, CP, VM, state, events, actuators, v_cruise_kph, rk, carstate, carcontrol, live100, livempc, AM, driver_status, LaC, LoC, angle_offset, passive) prof.checkpoint("Sent") # *** run loop at fixed rate *** rk.keep_time() prof.display()
def controlsd_thread(sm=None, pm=None, can_sock=None): gc.disable() # start the loop set_realtime_priority(3) params = Params() is_metric = params.get("IsMetric") == "1" passive = params.get("Passive") != "0" # Pub/Sub Sockets if pm is None: pm = messaging.PubMaster([ 'sendcan', 'controlsState', 'carState', 'carControl', 'carEvents', 'carParams' ]) if sm is None: sm = messaging.SubMaster(['thermal', 'health', 'liveCalibration', 'driverMonitoring', 'plan', 'pathPlan', \ 'gpsLocation'], ignore_alive=['gpsLocation']) if can_sock is None: can_timeout = None if os.environ.get('NO_CAN_TIMEOUT', False) else 100 can_sock = messaging.sub_sock(service_list['can'].port, timeout=can_timeout) # wait for health and CAN packets hw_type = messaging.recv_one(sm.sock['health']).health.hwType is_panda_black = hw_type == log.HealthData.HwType.blackPanda print("Waiting for CAN messages...") get_one_can(can_sock) CI, CP = get_car(can_sock, pm.sock['sendcan'], is_panda_black) car_recognized = CP.carName != 'mock' # If stock camera is disconnected, we loaded car controls and it's not chffrplus controller_available = CP.enableCamera and CI.CC is not None and not passive read_only = not car_recognized or not controller_available or CP.dashcamOnly if read_only: CP.safetyModel = CP.safetyModelPassive # Write CarParams for radard and boardd safety mode params.put("CarParams", CP.to_bytes()) params.put("LongitudinalControl", "1" if CP.openpilotLongitudinalControl else "0") CC = car.CarControl.new_message() AM = AlertManager() startup_alert = get_startup_alert(car_recognized, controller_available) AM.add(sm.frame, startup_alert, False) LoC = LongControl(CP, CI.compute_gb) VM = VehicleModel(CP) if CP.lateralTuning.which() == 'pid': LaC = LatControlPID(CP) elif CP.lateralTuning.which() == 'indi': LaC = LatControlINDI(CP) elif CP.lateralTuning.which() == 'lqr': LaC = LatControlLQR(CP) driver_status = DriverStatus() is_rhd = params.get("IsRHD") if is_rhd is not None: driver_status.is_rhd = bool(int(is_rhd)) state = State.disabled soft_disable_timer = 0 v_cruise_kph = 255 v_cruise_kph_last = 0 overtemp = False free_space = False cal_status = Calibration.INVALID cal_perc = 0 mismatch_counter = 0 low_battery = False events_prev = [] sm['pathPlan'].sensorValid = True sm['pathPlan'].posenetValid = True # detect sound card presence sounds_available = not os.path.isfile('/EON') or ( os.path.isdir('/proc/asound/card0') and open('/proc/asound/card0/state').read().strip() == 'ONLINE') # controlsd is driven by can recv, expected at 100Hz rk = Ratekeeper(100, print_delay_threshold=None) prof = Profiler(False) # off by default while True: start_time = sec_since_boot() prof.checkpoint("Ratekeeper", ignore=True) # Sample data and compute car events CS, events, cal_status, cal_perc, overtemp, free_space, low_battery, mismatch_counter =\ data_sample(CI, CC, sm, can_sock, cal_status, cal_perc, overtemp, free_space, low_battery, driver_status, state, mismatch_counter, params) prof.checkpoint("Sample") # Create alerts if not sm.all_alive_and_valid(): events.append( create_event('commIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if not sm['pathPlan'].mpcSolutionValid: events.append( create_event('plannerError', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) if not sm['pathPlan'].sensorValid: events.append( create_event('sensorDataInvalid', [ET.NO_ENTRY, ET.PERMANENT])) if not sm['pathPlan'].paramsValid: events.append(create_event('vehicleModelInvalid', [ET.WARNING])) if not sm['pathPlan'].posenetValid: events.append( create_event('posenetInvalid', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if not sm['plan'].radarValid: events.append( create_event('radarFault', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if sm['plan'].radarCanError: events.append( create_event('radarCanError', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if not CS.canValid: events.append( create_event('canError', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) if not sounds_available: events.append( create_event('soundsUnavailable', [ET.NO_ENTRY, ET.PERMANENT])) # Only allow engagement with brake pressed when stopped behind another stopped car if CS.brakePressed and sm[ 'plan'].vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3: events.append( create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) if not read_only: # update control state state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \ state_transition(sm.frame, CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM) prof.checkpoint("State transition") # Compute actuators (runs PID loops and lateral MPC) actuators, v_cruise_kph, driver_status, v_acc, a_acc, lac_log = \ state_control(sm.frame, sm.rcv_frame, sm['plan'], sm['pathPlan'], CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM, rk, driver_status, LaC, LoC, VM, read_only, is_metric, cal_perc) prof.checkpoint("State Control") # Publish data CC, events_prev = data_send(sm, pm, CS, CI, CP, VM, state, events, actuators, v_cruise_kph, rk, AM, driver_status, LaC, LoC, read_only, start_time, v_acc, a_acc, lac_log, events_prev) prof.checkpoint("Sent") rk.monitor_time() prof.display()
def controlsd_thread(gctx=None, rate=100): gc.disable() # start the loop set_realtime_priority(3) ##### AS context = zmq.Context() live100 = messaging.pub_sock(context, service_list['live100'].port) carstate = messaging.pub_sock(context, service_list['carState'].port) carcontrol = messaging.pub_sock(context, service_list['carControl'].port) carla_socket = context.socket(zmq.PAIR) carla_socket.bind("tcp://*:5560") is_metric = True passive = True ##### AS # No sendcan if passive if not passive: sendcan = messaging.pub_sock(context, service_list['sendcan'].port) else: sendcan = None # Sub sockets poller = zmq.Poller() #thermal = messaging.sub_sock(context, service_list['thermal'].port, conflate=True, poller=poller) #health = messaging.sub_sock(context, service_list['health'].port, conflate=True, poller=poller) cal = messaging.sub_sock(context, service_list['liveCalibration'].port, conflate=True, poller=poller) #driver_monitor = messaging.sub_sock(context, service_list['driverMonitoring'].port, conflate=True, poller=poller) plan_sock = messaging.sub_sock(context, service_list['plan'].port, conflate=True, poller=poller) path_plan_sock = messaging.sub_sock(context, service_list['pathPlan'].port, conflate=True, poller=poller) #logcan = messaging.sub_sock(context, service_list['can'].port) CC = car.CarControl.new_message() CP = ToyotaInterface.get_params("TOYOTA PRIUS 2017", {}) CP.steerRatio = 1.0 CI = ToyotaInterface(CP, sendcan) if CI is None: raise Exception("unsupported car") # if stock camera is connected, then force passive behavior if not CP.enableCamera: passive = True sendcan = None if passive: CP.safetyModel = car.CarParams.SafetyModels.noOutput LoC = LongControl(CP, CI.compute_gb) VM = VehicleModel(CP) LaC = LatControl(CP) AM = AlertManager() if not passive: AM.add("startup", False) state = State.enabled soft_disable_timer = 0 v_cruise_kph = 50 ##### !!! change v_cruise_kph_last = 0 ##### !! change cal_status = Calibration.CALIBRATED cal_perc = 0 plan = messaging.new_message() plan.init('plan') path_plan = messaging.new_message() path_plan.init('pathPlan') rk = Ratekeeper(rate, print_delay_threshold=2. / 1000) angle_offset = 0. prof = Profiler(False) # off by default startup = True ##### AS while True: start_time = int(sec_since_boot() * 1e9) prof.checkpoint("Ratekeeper", ignore=True) if cal_status != Calibration.CALIBRATED: assert (1 == 0), 'Got uncalibrated for some reason' stuff = recv_array(carla_socket) current_vel = float(stuff[0]) current_steer = float(stuff[1]) v_cruise_kph = float(stuff[2]) updateInternalCS(CI.CS, current_vel, current_steer, 0, v_cruise_kph) CS = returnNewCS(CI) events = list(CS.events) ##### AS since we dont do preenabled state if startup: LaC.reset() LoC.reset(v_pid=CS.vEgo) v_acc = 0 a_acc = 0 AM.process_alerts(0.0) startup = False ASsend_live100_CS(plan, path_plan, CS, VM, state, events, v_cruise_kph, AM, LaC, LoC, angle_offset, v_acc, a_acc, rk, start_time, live100, carstate) cal_status, cal_perc, plan, path_plan =\ ASdata_sample(plan_sock, path_plan_sock, cal, poller, cal_status, cal_perc, state, plan, path_plan) prof.checkpoint("Sample") path_plan_age = (start_time - path_plan.logMonoTime) / 1e9 plan_age = (start_time - plan.logMonoTime) / 1e9 if not path_plan.pathPlan.valid or plan_age > 0.5 or path_plan_age > 0.5: print 'planner time too long or invalid' #events.append(create_event('plannerError', [ET.NO_ENTRY, ET.SOFT_DISABLE])) events += list(plan.plan.events) # Only allow engagement with brake pressed when stopped behind another stopped car #if CS.brakePressed and plan.plan.vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3: # events.append(create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) if not passive: # update control state state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \ state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM) prof.checkpoint("State transition") v_acc, a_acc = \ ASstate_control(plan.plan, path_plan.pathPlan, CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM, rk, LaC, LoC, VM, angle_offset, passive, is_metric, cal_perc) prof.checkpoint("State Control") # Publish data yawrate = VM.yaw_rate(math.radians(path_plan.pathPlan.angleSteers), v_acc) beta = (VM.aR + VM.aF * VM.chi - VM.m * v_acc**2 / VM.cF / VM.cR / VM.l * (VM.cF * VM.aF - VM.cR * VM.aR * VM.chi)) beta *= yawrate / (1 - VM.chi) / v_acc send_array( carla_socket, np.array([ v_acc, path_plan.pathPlan.angleSteers, -3.3 * math.degrees(yawrate), -3.3 * math.degrees(beta) ])) prof.checkpoint("Sent") rk.monitor_time() # Run at 100Hz, no 20 Hz prof.display()
class Controls(object): def __init__(self, gctx, rate=100): self.rate = rate # *** log *** context = zmq.Context() # pub self.live100 = messaging.pub_sock(context, service_list['live100'].port) self.carstate = messaging.pub_sock(context, service_list['carState'].port) self.carcontrol = messaging.pub_sock(context, service_list['carControl'].port) sendcan = messaging.pub_sock(context, service_list['sendcan'].port) # sub self.thermal = messaging.sub_sock(context, service_list['thermal'].port) self.health = messaging.sub_sock(context, service_list['health'].port) logcan = messaging.sub_sock(context, service_list['can'].port) self.cal = messaging.sub_sock(context, service_list['liveCalibration'].port) self.CC = car.CarControl.new_message() self.CI, self.CP = get_car(logcan, sendcan) self.PL = Planner(self.CP) self.AM = AlertManager() self.LoC = LongControl() self.LaC = LatControl() # write CarParams params = Params() params.put("CarParams", self.CP.to_bytes()) # fake plan self.plan_ts = 0 self.plan = log.Plan.new_message() self.plan.lateralValid = False self.plan.longitudinalValid = False # controls enabled state self.enabled = False self.last_enable_request = 0 # learned angle offset self.angle_offset = 0 # rear view camera state self.rear_view_toggle = False self.rear_view_allowed = bool(params.get("IsRearViewMirror")) self.v_cruise_kph = 255 # 0.0 - 1.0 self.awareness_status = 1.0 self.soft_disable_timer = None self.overtemp = False self.free_space = 1.0 self.cal_status = Calibration.UNCALIBRATED self.cal_perc = 0 self.rk = Ratekeeper(self.rate, print_delay_threshold=2./1000) def data_sample(self): self.prof = Profiler() self.cur_time = sec_since_boot() # first read can and compute car states self.CS = self.CI.update() self.prof.checkpoint("CarInterface") # *** thermal checking logic *** # thermal data, checked every second td = messaging.recv_sock(self.thermal) if td is not None: # Check temperature. self.overtemp = any( t > 950 for t in (td.thermal.cpu0, td.thermal.cpu1, td.thermal.cpu2, td.thermal.cpu3, td.thermal.mem, td.thermal.gpu)) # under 15% of space free self.free_space = td.thermal.freeSpace # read calibration status cal = messaging.recv_sock(self.cal) if cal is not None: self.cal_status = cal.liveCalibration.calStatus self.cal_perc = cal.liveCalibration.calPerc def state_transition(self): pass # for now def state_control(self): # did it request to enable? enable_request, enable_condition = False, False # reset awareness status on steering if self.CS.steeringPressed or not self.enabled: self.awareness_status = 1.0 elif self.enabled: # gives the user 6 minutes self.awareness_status -= 1.0/(self.rate * AWARENESS_TIME) if self.awareness_status <= 0.: self.AM.add("driverDistracted", self.enabled) elif self.awareness_status <= AWARENESS_PRE_TIME / AWARENESS_TIME and \ self.awareness_status >= (AWARENESS_PRE_TIME - 0.1) / AWARENESS_TIME: self.AM.add("preDriverDistracted", self.enabled) # handle button presses for b in self.CS.buttonEvents: print b # button presses for rear view if b.type == "leftBlinker" or b.type == "rightBlinker": if b.pressed and self.rear_view_allowed: self.rear_view_toggle = True else: self.rear_view_toggle = False if b.type == "altButton1" and b.pressed: self.rear_view_toggle = not self.rear_view_toggle if not self.CP.enableCruise and self.enabled and not b.pressed: if b.type == "accelCruise": self.v_cruise_kph -= (self.v_cruise_kph % V_CRUISE_DELTA) - V_CRUISE_DELTA elif b.type == "decelCruise": self.v_cruise_kph -= (self.v_cruise_kph % V_CRUISE_DELTA) + V_CRUISE_DELTA self.v_cruise_kph = clip(self.v_cruise_kph, V_CRUISE_MIN, V_CRUISE_MAX) if not self.enabled and b.type in ["accelCruise", "decelCruise"] and not b.pressed: enable_request = True # do disable on button down if b.type == "cancel" and b.pressed: self.AM.add("disable", self.enabled) self.prof.checkpoint("Buttons") # *** health checking logic *** hh = messaging.recv_sock(self.health) if hh is not None: # if the board isn't allowing controls but somehow we are enabled! # TODO: this should be in state transition with a function follower logic if not hh.health.controlsAllowed and self.enabled: self.AM.add("controlsMismatch", self.enabled) # disable if the pedals are pressed while engaged, this is a user disable if self.enabled: if self.CS.gasPressed or self.CS.brakePressed or not self.CS.cruiseState.available: self.AM.add("disable", self.enabled) # it can happen that car cruise disables while comma system is enabled: need to # keep braking if needed or if the speed is very low # TODO: for the Acura, cancellation below 25mph is normal. Issue a non loud alert if self.CP.enableCruise and not self.CS.cruiseState.enabled and \ (self.CC.brake <= 0. or self.CS.vEgo < 0.3): self.AM.add("cruiseDisabled", self.enabled) if enable_request: # check for pressed pedals if self.CS.gasPressed or self.CS.brakePressed: self.AM.add("pedalPressed", self.enabled) enable_request = False else: print "enabled pressed at", self.cur_time self.last_enable_request = self.cur_time # don't engage with less than 15% free if self.free_space < 0.15: self.AM.add("outOfSpace", self.enabled) enable_request = False if self.CP.enableCruise: enable_condition = ((self.cur_time - self.last_enable_request) < 0.2) and self.CS.cruiseState.enabled else: enable_condition = enable_request print "==============" print enable_condition if self.CP.enableCruise and self.CS.cruiseState.enabled: self.v_cruise_kph = self.CS.cruiseState.speed * CV.MS_TO_KPH self.prof.checkpoint("AdaptiveCruise") # *** what's the plan *** plan_packet = self.PL.update(self.CS, self.LoC) #print "============" #print plan_packet self.plan = plan_packet.plan self.plan_ts = plan_packet.logMonoTime # if user is not responsive to awareness alerts, then start a smooth deceleration if self.awareness_status < -0.: self.plan.aTargetMax = min(self.plan.aTargetMax, AWARENESS_DECEL) self.plan.aTargetMin = min(self.plan.aTargetMin, self.plan.aTargetMax) if enable_request or enable_condition or self.enabled: # add all alerts from car for alert in self.CS.errors: self.AM.add(alert, self.enabled) if not self.plan.longitudinalValid: self.AM.add("radarCommIssue", self.enabled) if self.cal_status != Calibration.CALIBRATED: if self.cal_status == Calibration.UNCALIBRATED: self.AM.add("calibrationInProgress", self.enabled, str(self.cal_perc) + '%') else: self.AM.add("calibrationInvalid", self.enabled) if not self.plan.lateralValid: # If the model is not broadcasting, assume that it is because # the user has uploaded insufficient data for calibration. # Other cases that would trigger this are rare and unactionable by the user. self.AM.add("dataNeeded", self.enabled) if self.overtemp: self.AM.add("overheat", self.enabled) # *** angle offset learning *** if self.rk.frame % 5 == 2 and self.plan.lateralValid: # *** run this at 20hz again *** self.angle_offset = learn_angle_offset(self.enabled, self.CS.vEgo, self.angle_offset, self.plan.dPoly, self.LaC.y_des, self.CS.steeringPressed) # *** gas/brake PID loop *** final_gas, final_brake = self.LoC.update(self.enabled, self.CS.vEgo, self.v_cruise_kph, self.plan.vTarget, [self.plan.aTargetMin, self.plan.aTargetMax], self.plan.jerkFactor, self.CP) # *** steering PID loop *** final_steer, sat_flag = self.LaC.update(self.enabled, self.CS.vEgo, self.CS.steeringAngle, self.CS.steeringPressed, self.plan.dPoly, self.angle_offset, self.CP) self.prof.checkpoint("PID") # ***** handle alerts **** # send FCW alert if triggered by planner if self.plan.fcw: self.AM.add("fcw", self.enabled) # send a "steering required alert" if saturation count has reached the limit if sat_flag: self.AM.add("steerSaturated", self.enabled) if self.enabled and self.AM.alertShouldDisable(): print "DISABLING IMMEDIATELY ON ALERT" self.enabled = False if self.enabled and self.AM.alertShouldSoftDisable(): if self.soft_disable_timer is None: self.soft_disable_timer = 3 * self.rate elif self.soft_disable_timer == 0: print "SOFT DISABLING ON ALERT" self.enabled = False else: self.soft_disable_timer -= 1 else: self.soft_disable_timer = None if enable_condition and not self.enabled and not self.AM.alertPresent(): print "*** enabling controls" # beep for enabling self.AM.add("enable", self.enabled) # enable both lateral and longitudinal controls self.enabled = True # on activation, let's always set v_cruise from where we are, even if PCM ACC is active self.v_cruise_kph = int(round(max(self.CS.vEgo * CV.MS_TO_KPH, V_CRUISE_ENABLE_MIN))) # 6 minutes driver you're on self.awareness_status = 1.0 # reset the PID loops self.LaC.reset() # start long control at actual speed self.LoC.reset(v_pid = self.CS.vEgo) # *** push the alerts to current *** # TODO: remove output, store them inside AM class instead self.alert_text_1, self.alert_text_2, self.visual_alert, self.audible_alert = self.AM.process_alerts(self.cur_time) # ***** control the car ***** self.CC.enabled = self.enabled self.CC.gas = float(final_gas) self.CC.brake = float(final_brake) self.CC.steeringTorque = float(final_steer) self.CC.cruiseControl.override = True # always cancel if we have an interceptor self.CC.cruiseControl.cancel = bool(not self.CP.enableCruise or (not self.enabled and self.CS.cruiseState.enabled)) # brake discount removes a sharp nonlinearity brake_discount = (1.0 - clip(final_brake*3., 0.0, 1.0)) self.CC.cruiseControl.speedOverride = float(max(0.0, ((self.LoC.v_pid - .5) * brake_discount)) if self.CP.enableCruise else 0.0) #CC.cruiseControl.accelOverride = float(AC.a_pcm) # TODO: fix this self.CC.cruiseControl.accelOverride = float(1.0) self.CC.hudControl.setSpeed = float(self.v_cruise_kph * CV.KPH_TO_MS) self.CC.hudControl.speedVisible = self.enabled self.CC.hudControl.lanesVisible = self.enabled self.CC.hudControl.leadVisible = self.plan.hasLead self.CC.hudControl.visualAlert = self.visual_alert self.CC.hudControl.audibleAlert = self.audible_alert # TODO: remove it from here and put it in state_transition # this alert will apply next controls cycle if not self.CI.apply(self.CC): self.AM.add("controlsFailed", self.enabled) def data_send(self): # broadcast carControl first cc_send = messaging.new_message() cc_send.init('carControl') cc_send.carControl = copy(self.CC) self.carcontrol.send(cc_send.to_bytes()) self.prof.checkpoint("CarControl") # broadcast carState cs_send = messaging.new_message() cs_send.init('carState') cs_send.carState = copy(self.CS) self.carstate.send(cs_send.to_bytes()) # ***** publish state to logger ***** # publish controls state at 100Hz dat = messaging.new_message() dat.init('live100') # show rear view camera on phone if in reverse gear or when button is pressed dat.live100.rearViewCam = ('reverseGear' in self.CS.errors and self.rear_view_allowed) or self.rear_view_toggle dat.live100.alertText1 = self.alert_text_1 dat.live100.alertText2 = self.alert_text_2 dat.live100.awarenessStatus = max(self.awareness_status, 0.0) if self.enabled else 0.0 # what packets were used to process dat.live100.canMonoTimes = list(self.CS.canMonoTimes) dat.live100.planMonoTime = self.plan_ts # if controls is enabled dat.live100.enabled = self.enabled # car state dat.live100.vEgo = self.CS.vEgo dat.live100.angleSteers = self.CS.steeringAngle dat.live100.steerOverride = self.CS.steeringPressed # longitudinal control state dat.live100.vPid = float(self.LoC.v_pid) dat.live100.vCruise = float(self.v_cruise_kph) dat.live100.upAccelCmd = float(self.LoC.Up_accel_cmd) dat.live100.uiAccelCmd = float(self.LoC.Ui_accel_cmd) # lateral control state dat.live100.yActual = float(self.LaC.y_actual) dat.live100.yDes = float(self.LaC.y_des) dat.live100.upSteer = float(self.LaC.Up_steer) dat.live100.uiSteer = float(self.LaC.Ui_steer) # processed radar state, should add a_pcm? dat.live100.vTargetLead = float(self.plan.vTarget) dat.live100.aTargetMin = float(self.plan.aTargetMin) dat.live100.aTargetMax = float(self.plan.aTargetMax) dat.live100.jerkFactor = float(self.plan.jerkFactor) # log learned angle offset dat.live100.angleOffset = float(self.angle_offset) # lag dat.live100.cumLagMs = -self.rk.remaining*1000. self.live100.send(dat.to_bytes()) self.prof.checkpoint("Live100") def wait(self): # *** run loop at fixed rate *** if self.rk.keep_time(): self.prof.display()
def controlsd_thread(gctx, rate=100): #rate in Hz # *** log *** context = zmq.Context() live100 = messaging.pub_sock(context, service_list['live100'].port) carstate = messaging.pub_sock(context, service_list['carState'].port) carcontrol = messaging.pub_sock(context, service_list['carControl'].port) sendcan = messaging.pub_sock(context, service_list['sendcan'].port) thermal = messaging.sub_sock(context, service_list['thermal'].port) live20 = messaging.sub_sock(context, service_list['live20'].port) model = messaging.sub_sock(context, service_list['model'].port) health = messaging.sub_sock(context, service_list['health'].port) logcan = messaging.sub_sock(context, service_list['can'].port) # connects to can and sendcan CI = CarInterface() VP = CI.getVehicleParams() PP = PathPlanner(model) AC = AdaptiveCruise(live20) AM = AlertManager() LoC = LongControl() LaC = LatControl() # controls enabled state enabled = False last_enable_request = 0 # learned angle offset angle_offset = 0 # rear view camera state rear_view_toggle = False v_cruise_kph = 255 # 0.0 - 1.0 awareness_status = 0.0 soft_disable_timer = None # Is cpu temp too high to enable? overtemp = False free_space = 1.0 # start the loop set_realtime_priority(2) rk = Ratekeeper(rate, print_delay_threshold=2. / 1000) while 1: prof = Profiler() cur_time = sec_since_boot() # read CAN # CS = CI.update() CS = car.CarState.new_message() CS.vEgo = 13 for a in messaging.drain_sock(logcan): CS.steeringAngle = a.carState.steeringAngle # broadcast carState cs_send = messaging.new_message() cs_send.init('carState') cs_send.carState = CS # copy? carstate.send(cs_send.to_bytes()) prof.checkpoint("CarInterface") # did it request to enable? enable_request, enable_condition = False, False if enabled: # gives the user 6 minutes # awareness_status -= 1.0/(100*60*6) if awareness_status <= 0.: # AM.add("driverDistracted", enabled) awareness_status = 1.0 # reset awareness status on steering if CS.steeringPressed: awareness_status = 1.0 # handle button presses for b in CS.buttonEvents: print b # reset awareness on any user action awareness_status = 1.0 # button presses for rear view if b.type == "leftBlinker" or b.type == "rightBlinker": if b.pressed: rear_view_toggle = True else: rear_view_toggle = False if b.type == "altButton1" and b.pressed: rear_view_toggle = not rear_view_toggle if not VP.brake_only and enabled and not b.pressed: if b.type == "accelCruise": v_cruise_kph = v_cruise_kph - ( v_cruise_kph % V_CRUISE_DELTA) + V_CRUISE_DELTA elif b.type == "decelCruise": v_cruise_kph = v_cruise_kph - ( v_cruise_kph % V_CRUISE_DELTA) - V_CRUISE_DELTA v_cruise_kph = clip(v_cruise_kph, V_CRUISE_MIN, V_CRUISE_MAX) if not enabled and b.type in ["accelCruise", "decelCruise" ] and not b.pressed: enable_request = True # do disable on button down if b.type == "cancel" and b.pressed: AM.add("disable", enabled) # Hack-hack if not enabled: enable_request = True prof.checkpoint("Buttons") # *** health checking logic *** hh = messaging.recv_sock(health) if hh is not None: # if the board isn't allowing controls but somehow we are enabled! if not hh.health.controlsAllowed and enabled: AM.add("controlsMismatch", enabled) # *** thermal checking logic *** # thermal data, checked every second td = messaging.recv_sock(thermal) if False and td is not None: # Check temperature. overtemp = any(t > 950 for t in (td.thermal.cpu0, td.thermal.cpu1, td.thermal.cpu2, td.thermal.cpu3, td.thermal.mem, td.thermal.gpu)) # under 15% of space free free_space = td.thermal.freeSpace prof.checkpoint("Health") # *** getting model logic *** PP.update(cur_time, CS.vEgo) if rk.frame % 5 == 2: # *** run this at 20hz again *** angle_offset = learn_angle_offset(enabled, CS.vEgo, angle_offset, np.asarray(PP.d_poly), LaC.y_des, CS.steeringPressed) # disable if the pedals are pressed while engaged, this is a user disable if enabled: if CS.gasPressed or CS.brakePressed: AM.add("disable", enabled) if enable_request: # check for pressed pedals if CS.gasPressed or CS.brakePressed: AM.add("pedalPressed", enabled) enable_request = False else: print "enabled pressed at", cur_time last_enable_request = cur_time # don't engage with less than 15% free if free_space < 0.15: AM.add("outOfSpace", enabled) enable_request = False if VP.brake_only: enable_condition = ((cur_time - last_enable_request) < 0.2) and CS.cruiseState.enabled else: enable_condition = enable_request if enable_request or enable_condition or enabled: # add all alerts from car for alert in CS.errors: AM.add(alert, enabled) if False and AC.dead: AM.add("radarCommIssue", enabled) if PP.dead: AM.add("modelCommIssue", enabled) if overtemp: AM.add("overheat", enabled) prof.checkpoint("Model") if enable_condition and not enabled and not AM.alertPresent(): print "*** enabling controls" # beep for enabling AM.add("enable", enabled) # enable both lateral and longitudinal controls enabled = True # on activation, let's always set v_cruise from where we are, even if PCM ACC is active v_cruise_kph = int( round( max(CS.vEgo * CV.MS_TO_KPH * VP.ui_speed_fudge, V_CRUISE_ENABLE_MIN))) # 6 minutes driver you're on awareness_status = 1.0 # reset the PID loops LaC.reset() # start long control at actual speed LoC.reset(v_pid=CS.vEgo) if VP.brake_only and CS.cruiseState.enabled: v_cruise_kph = CS.cruiseState.speed * CV.MS_TO_KPH # *** put the adaptive in adaptive cruise control *** AC.update(cur_time, CS.vEgo, CS.steeringAngle, LoC.v_pid, awareness_status, VP) prof.checkpoint("AdaptiveCruise") # *** gas/brake PID loop *** final_gas, final_brake = LoC.update(enabled, CS.vEgo, v_cruise_kph, AC.v_target_lead, AC.a_target, AC.jerk_factor, VP) # *** steering PID loop *** final_steer, sat_flag = LaC.update(enabled, CS.vEgo, CS.steeringAngle, CS.steeringPressed, PP.d_poly, angle_offset, VP) prof.checkpoint("PID") # ***** handle alerts **** # send a "steering required alert" if saturation count has reached the limit if False and sat_flag: AM.add("steerSaturated", enabled) if enabled and AM.alertShouldDisable(): print "DISABLING IMMEDIATELY ON ALERT" enabled = False if enabled and AM.alertShouldSoftDisable(): if soft_disable_timer is None: soft_disable_timer = 3 * rate elif soft_disable_timer == 0: print "SOFT DISABLING ON ALERT" enabled = False else: soft_disable_timer -= 1 else: soft_disable_timer = None # *** push the alerts to current *** alert_text_1, alert_text_2, visual_alert, audible_alert = AM.process_alerts( cur_time) # ***** control the car ***** CC = car.CarControl.new_message() CC.enabled = enabled CC.gas = float(final_gas) CC.brake = float(final_brake) CC.steeringTorque = float(final_steer) CC.cruiseControl.override = True CC.cruiseControl.cancel = bool( (not VP.brake_only) or (not enabled and CS.cruiseState.enabled )) # always cancel if we have an interceptor CC.cruiseControl.speedOverride = float((LoC.v_pid - .3) if ( VP.brake_only and final_brake == 0.) else 0.0) CC.cruiseControl.accelOverride = float(AC.a_pcm) CC.hudControl.setSpeed = float(v_cruise_kph * CV.KPH_TO_MS) CC.hudControl.speedVisible = enabled CC.hudControl.lanesVisible = enabled CC.hudControl.leadVisible = bool(AC.has_lead) CC.hudControl.visualAlert = visual_alert CC.hudControl.audibleAlert = audible_alert # this alert will apply next controls cycle #if not CI.apply(CC): # AM.add("controlsFailed", enabled) # broadcast carControl cc_send = messaging.new_message() cc_send.init('carControl') cc_send.carControl = CC # copy? #carcontrol.send(cc_send.to_bytes()) sendcan.send(cc_send.to_bytes()) prof.checkpoint("CarControl") # ***** publish state to logger ***** # publish controls state at 100Hz dat = messaging.new_message() dat.init('live100') # show rear view camera on phone if in reverse gear or when button is pressed dat.live100.rearViewCam = ('reverseGear' in CS.errors) or rear_view_toggle dat.live100.alertText1 = alert_text_1 dat.live100.alertText2 = alert_text_2 dat.live100.awarenessStatus = max(awareness_status, 0.0) if enabled else 0.0 # what packets were used to process dat.live100.canMonoTimes = list(CS.canMonoTimes) dat.live100.mdMonoTime = PP.logMonoTime dat.live100.l20MonoTime = AC.logMonoTime # if controls is enabled dat.live100.enabled = enabled # car state dat.live100.vEgo = CS.vEgo dat.live100.angleSteers = CS.steeringAngle dat.live100.steerOverride = CS.steeringPressed # longitudinal control state dat.live100.vPid = float(LoC.v_pid) dat.live100.vCruise = float(v_cruise_kph) dat.live100.upAccelCmd = float(LoC.Up_accel_cmd) dat.live100.uiAccelCmd = float(LoC.Ui_accel_cmd) # lateral control state dat.live100.yActual = float(LaC.y_actual) dat.live100.yDes = float(LaC.y_des) dat.live100.upSteer = float(LaC.Up_steer) dat.live100.uiSteer = float(LaC.Ui_steer) # processed radar state, should add a_pcm? dat.live100.vTargetLead = float(AC.v_target_lead) dat.live100.aTargetMin = float(AC.a_target[0]) dat.live100.aTargetMax = float(AC.a_target[1]) dat.live100.jerkFactor = float(AC.jerk_factor) # lag dat.live100.cumLagMs = -rk.remaining * 1000. live100.send(dat.to_bytes()) prof.checkpoint("Live100") # *** run loop at fixed rate *** if rk.keep_time(): prof.display()
class Controls: def __init__(self, sm=None, pm=None, can_sock=None): gc.disable() set_realtime_priority(3) # Setup sockets self.pm = pm if self.pm is None: self.pm = messaging.PubMaster(['sendcan', 'controlsState', 'carState', \ 'carControl', 'carEvents', 'carParams']) self.sm = sm if self.sm is None: self.sm = messaging.SubMaster(['thermal', 'health', 'model', 'liveCalibration', \ 'dMonitoringState', 'plan', 'pathPlan']) self.can_sock = can_sock if can_sock is None: can_timeout = None if os.environ.get('NO_CAN_TIMEOUT', False) else 100 self.can_sock = messaging.sub_sock('can', timeout=can_timeout) # wait for one health and one CAN packet hw_type = messaging.recv_one(self.sm.sock['health']).health.hwType has_relay = hw_type in [HwType.blackPanda, HwType.uno] print("Waiting for CAN messages...") messaging.get_one_can(self.can_sock) self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'], has_relay) # read params params = Params() self.is_metric = params.get("IsMetric", encoding='utf8') == "1" self.is_ldw_enabled = params.get("IsLdwEnabled", encoding='utf8') == "1" internet_needed = params.get("Offroad_ConnectivityNeeded", encoding='utf8') is not None community_feature_toggle = params.get("CommunityFeaturesToggle", encoding='utf8') == "1" openpilot_enabled_toggle = params.get("OpenpilotEnabledToggle", encoding='utf8') == "1" passive = params.get("Passive", encoding='utf8') == "1" or \ internet_needed or not openpilot_enabled_toggle car_recognized = self.CP.carName != 'mock' # If stock camera is disconnected, we loaded car controls and it's not dashcam mode controller_available = self.CP.enableCamera and self.CI.CC is not None and not passive community_feature_disallowed = self.CP.communityFeature and not community_feature_toggle self.read_only = not car_recognized or not controller_available or \ self.CP.dashcamOnly or community_feature_disallowed if self.read_only: self.CP.safetyModel = car.CarParams.SafetyModel.noOutput # Write CarParams for radard and boardd safety mode cp_bytes = self.CP.to_bytes() params.put("CarParams", cp_bytes) put_nonblocking("CarParamsCache", cp_bytes) put_nonblocking("LongitudinalControl", "1" if self.CP.openpilotLongitudinalControl else "0") self.CC = car.CarControl.new_message() self.AM = AlertManager() self.LoC = LongControl(self.CP, self.CI.compute_gb) self.VM = VehicleModel(self.CP) if self.CP.lateralTuning.which() == 'pid': self.LaC = LatControlPID(self.CP) elif self.CP.lateralTuning.which() == 'indi': self.LaC = LatControlINDI(self.CP) elif self.CP.lateralTuning.which() == 'lqr': self.LaC = LatControlLQR(self.CP) self.state = State.disabled self.enabled = False self.active = False self.can_rcv_error = False self.soft_disable_timer = 0 self.v_cruise_kph = 255 self.v_cruise_kph_last = 0 self.mismatch_counter = 0 self.can_error_counter = 0 self.last_blinker_frame = 0 self.saturated_count = 0 self.events_prev = "" self.sm['liveCalibration'].calStatus = Calibration.INVALID self.sm['pathPlan'].sensorValid = True self.sm['pathPlan'].posenetValid = True self.sm['thermal'].freeSpace = 1. self.sm['dMonitoringState'].events = [] self.sm['dMonitoringState'].awarenessStatus = 1. self.sm['dMonitoringState'].faceDetected = False startup_alert = get_startup_alert(car_recognized, controller_available) self.AM.add(self.sm.frame, startup_alert, False) # controlsd is driven by can recv, expected at 100Hz self.rk = Ratekeeper(100, print_delay_threshold=None) self.prof = Profiler(False) # off by default # detect sound card presence and ensure successful init sounds_available = not os.path.isfile('/EON') or (os.path.isdir('/proc/asound/card0') \ and open('/proc/asound/card0/state').read().strip() == 'ONLINE') self.static_events = [] if not sounds_available: self.static_events.append(create_event('soundsUnavailable', [ET.NO_ENTRY, ET.PERMANENT])) if internet_needed: self.static_events.append(create_event('internetConnectivityNeeded', [ET.NO_ENTRY, ET.PERMANENT])) if community_feature_disallowed: self.static_events.append(create_event('communityFeatureDisallowed', [ET.PERMANENT])) if self.read_only and not passive: self.static_events.append(create_event('carUnrecognized', [ET.PERMANENT])) def create_events(self, CS): """Compute carEvents from carState""" events = self.static_events.copy() events.extend(CS.events) events.extend(self.sm['dMonitoringState'].events) # Create events for battery, temperature, disk space, and memory if self.sm['thermal'].batteryPercent < 1 and self.sm['thermal'].chargingError: # at zero percent battery, while discharging, OP should not allowed events.append(create_event('lowBattery', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if self.sm['thermal'].thermalStatus >= ThermalStatus.red: events.append(create_event('overheat', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if self.sm['thermal'].freeSpace < 0.07: # under 7% of space free no enable allowed events.append(create_event('outOfSpace', [ET.NO_ENTRY])) if self.sm['thermal'].memUsedPercent > 90: events.append(create_event('lowMemory', [ET.NO_ENTRY, ET.SOFT_DISABLE, ET.PERMANENT])) # Handle calibration status cal_status = self.sm['liveCalibration'].calStatus if cal_status != Calibration.CALIBRATED: if cal_status == Calibration.UNCALIBRATED: events.append(create_event('calibrationIncomplete', [ET.NO_ENTRY, ET.SOFT_DISABLE, ET.PERMANENT])) else: events.append(create_event('calibrationInvalid', [ET.NO_ENTRY, ET.SOFT_DISABLE])) # Handle lane change if self.sm['pathPlan'].laneChangeState == LaneChangeState.preLaneChange: if self.sm['pathPlan'].laneChangeDirection == LaneChangeDirection.left: events.append(create_event('preLaneChangeLeft', [ET.WARNING])) else: events.append(create_event('preLaneChangeRight', [ET.WARNING])) elif self.sm['pathPlan'].laneChangeState in [LaneChangeState.laneChangeStarting, \ LaneChangeState.laneChangeFinishing]: events.append(create_event('laneChange', [ET.WARNING])) if self.can_rcv_error: events.append(create_event('canError', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) if self.mismatch_counter >= 200: events.append(create_event('controlsMismatch', [ET.IMMEDIATE_DISABLE])) if not self.sm.alive['plan'] and self.sm.alive['pathPlan']: # only plan not being received: radar not communicating events.append(create_event('radarCommIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE])) elif not self.sm.all_alive_and_valid(): events.append(create_event('commIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if not self.sm['pathPlan'].mpcSolutionValid: events.append(create_event('plannerError', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) if not self.sm['pathPlan'].sensorValid and os.getenv("NOSENSOR") is None: events.append(create_event('sensorDataInvalid', [ET.NO_ENTRY, ET.PERMANENT])) if not self.sm['pathPlan'].paramsValid: events.append(create_event('vehicleModelInvalid', [ET.WARNING])) if not self.sm['pathPlan'].posenetValid: events.append(create_event('posenetInvalid', [ET.NO_ENTRY, ET.WARNING])) if not self.sm['plan'].radarValid: events.append(create_event('radarFault', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if self.sm['plan'].radarCanError: events.append(create_event('radarCanError', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if not CS.canValid: events.append(create_event('canError', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) if log.HealthData.FaultType.relayMalfunction in self.sm['health'].faults: events.append(create_event('relayMalfunction', [ET.NO_ENTRY, ET.PERMANENT, ET.IMMEDIATE_DISABLE])) # Only allow engagement with brake pressed when stopped behind another stopped car if CS.brakePressed and self.sm['plan'].vTargetFuture >= STARTING_TARGET_SPEED \ and not self.CP.radarOffCan and CS.vEgo < 0.3: events.append(create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) # TODO: clean up this alert creation in alerts refactor if self.active: for e in get_events(events, [ET.WARNING]): # TODO: handle non static text in a cleaner way, like a callback extra_text = "" if e == "belowSteerSpeed": if self.is_metric: extra_text = str(int(round(self.CP.minSteerSpeed * CV.MS_TO_KPH))) + " kph" else: extra_text = str(int(round(self.CP.minSteerSpeed * CV.MS_TO_MPH))) + " mph" self.AM.add(self.sm.frame, e, self.enabled, extra_text_2=extra_text) for e in get_events(events, [ET.PERMANENT]): # TODO: handle non static text in a cleaner way, like a callback extra_text_1, extra_text_2 = "", "" if e == "calibrationIncomplete": extra_text_1 = str(self.sm['liveCalibration'].calPerc) + "%" if self.is_metric: extra_text_2 = str(int(round(Filter.MIN_SPEED * CV.MS_TO_KPH))) + " kph" else: extra_text_2 = str(int(round(Filter.MIN_SPEED * CV.MS_TO_MPH))) + " mph" self.AM.add(self.sm.frame, str(e) + "Permanent", self.enabled, \ extra_text_1=extra_text_1, extra_text_2=extra_text_2) return events def data_sample(self): """Receive data from sockets and update carState""" # Update carState from CAN can_strs = messaging.drain_sock_raw(self.can_sock, wait_for_one=True) CS = self.CI.update(self.CC, can_strs) self.sm.update(0) # Check for CAN timeout if not can_strs: self.can_error_counter += 1 self.can_rcv_error = True else: self.can_rcv_error = False # When the panda and controlsd do not agree on controls_allowed # we want to disengage openpilot. However the status from the panda goes through # another socket other than the CAN messages and one can arrive earlier than the other. # Therefore we allow a mismatch for two samples, then we trigger the disengagement. if not self.enabled: self.mismatch_counter = 0 if not self.sm['health'].controlsAllowed and self.enabled: self.mismatch_counter += 1 return CS def state_transition(self, CS, events): """Compute conditional state transitions and execute actions on state transitions""" self.v_cruise_kph_last = self.v_cruise_kph # if stock cruise is completely disabled, then we can use our own set speed logic if not self.CP.enableCruise: self.v_cruise_kph = update_v_cruise(self.v_cruise_kph, CS.buttonEvents, self.enabled) elif self.CP.enableCruise and CS.cruiseState.enabled: self.v_cruise_kph = CS.cruiseState.speed * CV.MS_TO_KPH # decrease the soft disable timer at every step, as it's reset on # entrance in SOFT_DISABLING state self.soft_disable_timer = max(0, self.soft_disable_timer - 1) alert_types = [] # ENABLED, PRE ENABLING, SOFT DISABLING if self.state != State.disabled: # user and immediate disable always have priority in a non-disabled state if get_events(events, [ET.USER_DISABLE]): self.state = State.disabled self.AM.add(self.sm.frame, "disable", self.enabled) elif get_events(events, [ET.IMMEDIATE_DISABLE]): self.state = State.disabled alert_types = [ET.IMMEDIATE_DISABLE] else: # ENABLED if self.state == State.enabled: if get_events(events, [ET.SOFT_DISABLE]): self.state = State.softDisabling self.soft_disable_timer = 300 # 3s alert_types = [ET.SOFT_DISABLE] # SOFT DISABLING elif self.state == State.softDisabling: if not get_events(events, [ET.SOFT_DISABLE]): # no more soft disabling condition, so go back to ENABLED self.state = State.enabled elif get_events(events, [ET.SOFT_DISABLE]) and self.soft_disable_timer > 0: alert_types = [ET.SOFT_DISABLE] elif self.soft_disable_timer <= 0: self.state = State.disabled # PRE ENABLING elif self.state == State.preEnabled: if not get_events(events, [ET.PRE_ENABLE]): self.state = State.enabled # DISABLED elif self.state == State.disabled: if get_events(events, [ET.ENABLE]): if get_events(events, [ET.NO_ENTRY]): for e in get_events(events, [ET.NO_ENTRY]): self.AM.add(self.sm.frame, str(e) + "NoEntry", self.enabled) else: if get_events(events, [ET.PRE_ENABLE]): self.state = State.preEnabled else: self.state = State.enabled self.AM.add(self.sm.frame, "enable", self.enabled) self.v_cruise_kph = initialize_v_cruise(CS.vEgo, CS.buttonEvents, self.v_cruise_kph_last) for e in get_events(events, alert_types): self.AM.add(self.sm.frame, e, self.enabled) # Check if actuators are enabled self.active = self.state == State.enabled or self.state == State.softDisabling # Check if openpilot is engaged self.enabled = self.active or self.state == State.preEnabled def state_control(self, CS, events): """Given the state, this function returns an actuators packet""" plan = self.sm['plan'] path_plan = self.sm['pathPlan'] actuators = car.CarControl.Actuators.new_message() if CS.leftBlinker or CS.rightBlinker: self.last_blinker_frame = self.sm.frame if plan.fcw: # send FCW alert if triggered by planner self.AM.add(self.sm.frame, "fcw", self.enabled) elif CS.stockFcw: # send a silent alert when stock fcw triggers, since the car is already beeping self.AM.add(self.sm.frame, "fcwStock", self.enabled) # State specific actions if not self.active: self.LaC.reset() self.LoC.reset(v_pid=CS.vEgo) plan_age = DT_CTRL * (self.sm.frame - self.sm.rcv_frame['plan']) # no greater than dt mpc + dt, to prevent too high extraps dt = min(plan_age, LON_MPC_STEP + DT_CTRL) + DT_CTRL a_acc_sol = plan.aStart + (dt / LON_MPC_STEP) * (plan.aTarget - plan.aStart) v_acc_sol = plan.vStart + dt * (a_acc_sol + plan.aStart) / 2.0 # Gas/Brake PID loop actuators.gas, actuators.brake = self.LoC.update(self.active, CS, v_acc_sol, plan.vTargetFuture, a_acc_sol, self.CP) # Steering PID loop and lateral MPC actuators.steer, actuators.steerAngle, lac_log = self.LaC.update(self.active, CS, self.CP, path_plan) # Check for difference between desired angle and angle for angle based control angle_control_saturated = self.CP.steerControlType == car.CarParams.SteerControlType.angle and \ abs(actuators.steerAngle - CS.steeringAngle) > STEER_ANGLE_SATURATION_THRESHOLD if angle_control_saturated and not CS.steeringPressed and self.active: self.saturated_count += 1 # Send a "steering required alert" if saturation count has reached the limit if (lac_log.saturated and not CS.steeringPressed) or \ (self.saturated_count > STEER_ANGLE_SATURATION_TIMEOUT): # Check if we deviated from the path left_deviation = actuators.steer > 0 and path_plan.dPoly[3] > 0.1 right_deviation = actuators.steer < 0 and path_plan.dPoly[3] < -0.1 if left_deviation or right_deviation: self.AM.add(self.sm.frame, "steerSaturated", self.enabled) return actuators, v_acc_sol, a_acc_sol, lac_log def publish_logs(self, CS, events, start_time, actuators, v_acc, a_acc, lac_log): """Send actuators and hud commands to the car, send controlsstate and MPC logging""" CC = car.CarControl.new_message() CC.enabled = self.enabled CC.actuators = actuators CC.cruiseControl.override = True CC.cruiseControl.cancel = not self.CP.enableCruise or (not self.enabled and CS.cruiseState.enabled) # Some override values for Honda # brake discount removes a sharp nonlinearity brake_discount = (1.0 - clip(actuators.brake * 3., 0.0, 1.0)) speed_override = max(0.0, (self.LoC.v_pid + CS.cruiseState.speedOffset) * brake_discount) CC.cruiseControl.speedOverride = float(speed_override if self.CP.enableCruise else 0.0) CC.cruiseControl.accelOverride = self.CI.calc_accel_override(CS.aEgo, self.sm['plan'].aTarget, CS.vEgo, self.sm['plan'].vTarget) CC.hudControl.setSpeed = float(self.v_cruise_kph * CV.KPH_TO_MS) CC.hudControl.speedVisible = self.enabled CC.hudControl.lanesVisible = self.enabled CC.hudControl.leadVisible = self.sm['plan'].hasLead right_lane_visible = self.sm['pathPlan'].rProb > 0.5 left_lane_visible = self.sm['pathPlan'].lProb > 0.5 CC.hudControl.rightLaneVisible = bool(right_lane_visible) CC.hudControl.leftLaneVisible = bool(left_lane_visible) recent_blinker = (self.sm.frame - self.last_blinker_frame) * DT_CTRL < 5.0 # 5s blinker cooldown ldw_allowed = self.is_ldw_enabled and CS.vEgo > LDW_MIN_SPEED and not recent_blinker \ and not self.active and self.sm['liveCalibration'].calStatus == Calibration.CALIBRATED meta = self.sm['model'].meta if len(meta.desirePrediction) and ldw_allowed: l_lane_change_prob = meta.desirePrediction[Desire.laneChangeLeft - 1] r_lane_change_prob = meta.desirePrediction[Desire.laneChangeRight - 1] l_lane_close = left_lane_visible and (self.sm['pathPlan'].lPoly[3] < (1.08 - CAMERA_OFFSET)) r_lane_close = right_lane_visible and (self.sm['pathPlan'].rPoly[3] > -(1.08 + CAMERA_OFFSET)) CC.hudControl.leftLaneDepart = bool(l_lane_change_prob > LANE_DEPARTURE_THRESHOLD and l_lane_close) CC.hudControl.rightLaneDepart = bool(r_lane_change_prob > LANE_DEPARTURE_THRESHOLD and r_lane_close) if CC.hudControl.rightLaneDepart or CC.hudControl.leftLaneDepart: self.AM.add(self.sm.frame, 'ldwPermanent', False) events.append(create_event('ldw', [ET.PERMANENT])) self.AM.process_alerts(self.sm.frame) CC.hudControl.visualAlert = self.AM.visual_alert if not self.read_only: # send car controls over can can_sends = self.CI.apply(CC) self.pm.send('sendcan', can_list_to_can_capnp(can_sends, msgtype='sendcan', valid=CS.canValid)) force_decel = (self.sm['dMonitoringState'].awarenessStatus < 0.) or \ (self.state == State.softDisabling) steer_angle_rad = (CS.steeringAngle - self.sm['pathPlan'].angleOffset) * CV.DEG_TO_RAD # controlsState dat = messaging.new_message('controlsState') dat.valid = CS.canValid controlsState = dat.controlsState controlsState.alertText1 = self.AM.alert_text_1 controlsState.alertText2 = self.AM.alert_text_2 controlsState.alertSize = self.AM.alert_size controlsState.alertStatus = self.AM.alert_status controlsState.alertBlinkingRate = self.AM.alert_rate controlsState.alertType = self.AM.alert_type controlsState.alertSound = self.AM.audible_alert controlsState.driverMonitoringOn = self.sm['dMonitoringState'].faceDetected controlsState.canMonoTimes = list(CS.canMonoTimes) controlsState.planMonoTime = self.sm.logMonoTime['plan'] controlsState.pathPlanMonoTime = self.sm.logMonoTime['pathPlan'] controlsState.enabled = self.enabled controlsState.active = self.active controlsState.vEgo = CS.vEgo controlsState.vEgoRaw = CS.vEgoRaw controlsState.angleSteers = CS.steeringAngle controlsState.curvature = self.VM.calc_curvature(steer_angle_rad, CS.vEgo) controlsState.steerOverride = CS.steeringPressed controlsState.state = self.state controlsState.engageable = not bool(get_events(events, [ET.NO_ENTRY])) controlsState.longControlState = self.LoC.long_control_state controlsState.vPid = float(self.LoC.v_pid) controlsState.vCruise = float(self.v_cruise_kph) controlsState.upAccelCmd = float(self.LoC.pid.p) controlsState.uiAccelCmd = float(self.LoC.pid.i) controlsState.ufAccelCmd = float(self.LoC.pid.f) controlsState.angleSteersDes = float(self.LaC.angle_steers_des) controlsState.vTargetLead = float(v_acc) controlsState.aTarget = float(a_acc) controlsState.jerkFactor = float(self.sm['plan'].jerkFactor) controlsState.gpsPlannerActive = self.sm['plan'].gpsPlannerActive controlsState.vCurvature = self.sm['plan'].vCurvature controlsState.decelForModel = self.sm['plan'].longitudinalPlanSource == LongitudinalPlanSource.model controlsState.cumLagMs = -self.rk.remaining * 1000. controlsState.startMonoTime = int(start_time * 1e9) controlsState.mapValid = self.sm['plan'].mapValid controlsState.forceDecel = bool(force_decel) controlsState.canErrorCounter = self.can_error_counter if self.CP.lateralTuning.which() == 'pid': controlsState.lateralControlState.pidState = lac_log elif self.CP.lateralTuning.which() == 'lqr': controlsState.lateralControlState.lqrState = lac_log elif self.CP.lateralTuning.which() == 'indi': controlsState.lateralControlState.indiState = lac_log self.pm.send('controlsState', dat) # carState cs_send = messaging.new_message('carState') cs_send.valid = CS.canValid cs_send.carState = CS cs_send.carState.events = events self.pm.send('carState', cs_send) # carEvents - logged every second or on change events_bytes = events_to_bytes(events) if (self.sm.frame % int(1. / DT_CTRL) == 0) or (events_bytes != self.events_prev): ce_send = messaging.new_message('carEvents', len(events)) ce_send.carEvents = events self.pm.send('carEvents', ce_send) self.events_prev = events_bytes # carParams - logged every 50 seconds (> 1 per segment) if (self.sm.frame % int(50. / DT_CTRL) == 0): cp_send = messaging.new_message('carParams') cp_send.carParams = self.CP self.pm.send('carParams', cp_send) # carControl cc_send = messaging.new_message('carControl') cc_send.valid = CS.canValid cc_send.carControl = CC self.pm.send('carControl', cc_send) # copy CarControl to pass to CarInterface on the next iteration self.CC = CC def step(self): start_time = sec_since_boot() self.prof.checkpoint("Ratekeeper", ignore=True) # Sample data from sockets and get a carState CS = self.data_sample() self.prof.checkpoint("Sample") events = self.create_events(CS) if not self.read_only: # Update control state self.state_transition(CS, events) self.prof.checkpoint("State transition") # Compute actuators (runs PID loops and lateral MPC) actuators, v_acc, a_acc, lac_log = self.state_control(CS, events) self.prof.checkpoint("State Control") # Publish data self.publish_logs(CS, events, start_time, actuators, v_acc, a_acc, lac_log) self.prof.checkpoint("Sent") def controlsd_thread(self): while True: self.step() self.rk.monitor_time() self.prof.display()
def controlsd_thread(gctx, rate=100): #rate in Hz # *** log *** context = zmq.Context() live100 = messaging.pub_sock(context, service_list['live100'].port) carstate = messaging.pub_sock(context, service_list['carState'].port) carcontrol = messaging.pub_sock(context, service_list['carControl'].port) thermal = messaging.sub_sock(context, service_list['thermal'].port) health = messaging.sub_sock(context, service_list['health'].port) plan_sock = messaging.sub_sock(context, service_list['plan'].port) logcan = messaging.sub_sock(context, service_list['can'].port) # connects to can CP = fingerprint(logcan) # import the car from the fingerprint cloudlog.info("controlsd is importing %s", CP.carName) exec('from selfdrive.car.'+CP.carName+'.interface import CarInterface') sendcan = messaging.pub_sock(context, service_list['sendcan'].port) CI = CarInterface(CP, logcan, sendcan) # write CarParams Params().put("CarParams", CP.to_bytes()) AM = AlertManager() LoC = LongControl() LaC = LatControl() # fake plan plan = log.Plan.new_message() plan.lateralValid = False plan.longitudinalValid = False last_plan_time = 0 # controls enabled state enabled = False last_enable_request = 0 # learned angle offset angle_offset = 0 # rear view camera state rear_view_toggle = False v_cruise_kph = 255 # 0.0 - 1.0 awareness_status = 0.0 soft_disable_timer = None # Is cpu temp too high to enable? overtemp = False free_space = 1.0 # start the loop set_realtime_priority(2) rk = Ratekeeper(rate, print_delay_threshold=2./1000) while 1: prof = Profiler() cur_time = sec_since_boot() # read CAN CS = CI.update() # broadcast carState cs_send = messaging.new_message() cs_send.init('carState') cs_send.carState = CS # copy? carstate.send(cs_send.to_bytes()) prof.checkpoint("CarInterface") # did it request to enable? enable_request, enable_condition = False, False if enabled: # gives the user 6 minutes awareness_status -= 1.0/(100*60*6) if awareness_status <= 0.: AM.add("driverDistracted", enabled) # reset awareness status on steering if CS.steeringPressed: awareness_status = 1.0 # handle button presses for b in CS.buttonEvents: print b # reset awareness on any user action awareness_status = 1.0 # button presses for rear view if b.type == "leftBlinker" or b.type == "rightBlinker": if b.pressed: rear_view_toggle = True else: rear_view_toggle = False if b.type == "altButton1" and b.pressed: rear_view_toggle = not rear_view_toggle if not CP.enableCruise and enabled and not b.pressed: if b.type == "accelCruise": v_cruise_kph = v_cruise_kph - (v_cruise_kph % V_CRUISE_DELTA) + V_CRUISE_DELTA elif b.type == "decelCruise": v_cruise_kph = v_cruise_kph - (v_cruise_kph % V_CRUISE_DELTA) - V_CRUISE_DELTA v_cruise_kph = clip(v_cruise_kph, V_CRUISE_MIN, V_CRUISE_MAX) if not enabled and b.type in ["accelCruise", "decelCruise"] and not b.pressed: enable_request = True # do disable on button down if b.type == "cancel" and b.pressed: AM.add("disable", enabled) prof.checkpoint("Buttons") # *** health checking logic *** hh = messaging.recv_sock(health) if hh is not None: # if the board isn't allowing controls but somehow we are enabled! if not hh.health.controlsAllowed and enabled: AM.add("controlsMismatch", enabled) # *** thermal checking logic *** # thermal data, checked every second td = messaging.recv_sock(thermal) if td is not None: # Check temperature. overtemp = any( t > 950 for t in (td.thermal.cpu0, td.thermal.cpu1, td.thermal.cpu2, td.thermal.cpu3, td.thermal.mem, td.thermal.gpu)) # under 15% of space free free_space = td.thermal.freeSpace prof.checkpoint("Health") # disable if the pedals are pressed while engaged, this is a user disable if enabled: if CS.gasPressed or CS.brakePressed: AM.add("disable", enabled) if enable_request: # check for pressed pedals if CS.gasPressed or CS.brakePressed: AM.add("pedalPressed", enabled) enable_request = False else: print "enabled pressed at", cur_time last_enable_request = cur_time # don't engage with less than 15% free if free_space < 0.15: AM.add("outOfSpace", enabled) enable_request = False if CP.enableCruise: enable_condition = ((cur_time - last_enable_request) < 0.2) and CS.cruiseState.enabled else: enable_condition = enable_request if CP.enableCruise and CS.cruiseState.enabled: v_cruise_kph = CS.cruiseState.speed * CV.MS_TO_KPH prof.checkpoint("AdaptiveCruise") # *** what's the plan *** new_plan = messaging.recv_sock(plan_sock) if new_plan is not None: plan = new_plan.plan plan = plan.as_builder() # plan can change in controls last_plan_time = cur_time # check plan for timeout if cur_time - last_plan_time > 0.5: plan.lateralValid = False plan.longitudinalValid = False # gives 18 seconds before decel begins (w 6 minute timeout) if awareness_status < -0.05: plan.aTargetMax = min(plan.aTargetMax, -0.2) plan.aTargetMin = min(plan.aTargetMin, plan.aTargetMax) if enable_request or enable_condition or enabled: # add all alerts from car for alert in CS.errors: AM.add(alert, enabled) if not plan.longitudinalValid: AM.add("radarCommIssue", enabled) if not plan.lateralValid: # If the model is not broadcasting, assume that it is because # the user has uploaded insufficient data for calibration. # Other cases that would trigger this are rare and unactionable by the user. AM.add("dataNeeded", enabled) if overtemp: AM.add("overheat", enabled) # *** angle offset learning *** if rk.frame % 5 == 2 and plan.lateralValid: # *** run this at 20hz again *** angle_offset = learn_angle_offset(enabled, CS.vEgo, angle_offset, np.asarray(plan.dPoly), LaC.y_des, CS.steeringPressed) # *** gas/brake PID loop *** final_gas, final_brake = LoC.update(enabled, CS.vEgo, v_cruise_kph, plan.vTarget, [plan.aTargetMin, plan.aTargetMax], plan.jerkFactor, CP) # *** steering PID loop *** final_steer, sat_flag = LaC.update(enabled, CS.vEgo, CS.steeringAngle, CS.steeringPressed, plan.dPoly, angle_offset, CP) prof.checkpoint("PID") # ***** handle alerts **** # send a "steering required alert" if saturation count has reached the limit if sat_flag: AM.add("steerSaturated", enabled) if enabled and AM.alertShouldDisable(): print "DISABLING IMMEDIATELY ON ALERT" enabled = False if enabled and AM.alertShouldSoftDisable(): if soft_disable_timer is None: soft_disable_timer = 3 * rate elif soft_disable_timer == 0: print "SOFT DISABLING ON ALERT" enabled = False else: soft_disable_timer -= 1 else: soft_disable_timer = None if enable_condition and not enabled and not AM.alertPresent(): print "*** enabling controls" # beep for enabling AM.add("enable", enabled) # enable both lateral and longitudinal controls enabled = True # on activation, let's always set v_cruise from where we are, even if PCM ACC is active v_cruise_kph = int(round(max(CS.vEgo * CV.MS_TO_KPH, V_CRUISE_ENABLE_MIN))) # 6 minutes driver you're on awareness_status = 1.0 # reset the PID loops LaC.reset() # start long control at actual speed LoC.reset(v_pid = CS.vEgo) # *** push the alerts to current *** alert_text_1, alert_text_2, visual_alert, audible_alert = AM.process_alerts(cur_time) # ***** control the car ***** CC = car.CarControl.new_message() CC.enabled = enabled CC.gas = float(final_gas) CC.brake = float(final_brake) CC.steeringTorque = float(final_steer) CC.cruiseControl.override = True CC.cruiseControl.cancel = bool((not CP.enableCruise) or (not enabled and CS.cruiseState.enabled)) # always cancel if we have an interceptor # brake discount removes a sharp nonlinearity brake_discount = (1.0 - clip(final_brake*3., 0.0, 1.0)) CC.cruiseControl.speedOverride = float(max(0.0, ((LoC.v_pid - .5) * brake_discount)) if CP.enableCruise else 0.0) #CC.cruiseControl.accelOverride = float(AC.a_pcm) # TODO: fix this CC.cruiseControl.accelOverride = float(1.0) CC.hudControl.setSpeed = float(v_cruise_kph * CV.KPH_TO_MS) CC.hudControl.speedVisible = enabled CC.hudControl.lanesVisible = enabled #CC.hudControl.leadVisible = bool(AC.has_lead) # TODO: fix this CC.hudControl.leadVisible = False CC.hudControl.visualAlert = visual_alert CC.hudControl.audibleAlert = audible_alert # this alert will apply next controls cycle if not CI.apply(CC): AM.add("controlsFailed", enabled) # broadcast carControl cc_send = messaging.new_message() cc_send.init('carControl') cc_send.carControl = CC # copy? carcontrol.send(cc_send.to_bytes()) prof.checkpoint("CarControl") # ***** publish state to logger ***** # publish controls state at 100Hz dat = messaging.new_message() dat.init('live100') # show rear view camera on phone if in reverse gear or when button is pressed dat.live100.rearViewCam = ('reverseGear' in CS.errors) or rear_view_toggle dat.live100.alertText1 = alert_text_1 dat.live100.alertText2 = alert_text_2 dat.live100.awarenessStatus = max(awareness_status, 0.0) if enabled else 0.0 # what packets were used to process dat.live100.canMonoTimes = list(CS.canMonoTimes) #dat.live100.mdMonoTime = PP.logMonoTime #dat.live100.l20MonoTime = AC.logMonoTime # if controls is enabled dat.live100.enabled = enabled # car state dat.live100.vEgo = CS.vEgo dat.live100.angleSteers = CS.steeringAngle dat.live100.steerOverride = CS.steeringPressed # longitudinal control state dat.live100.vPid = float(LoC.v_pid) dat.live100.vCruise = float(v_cruise_kph) dat.live100.upAccelCmd = float(LoC.Up_accel_cmd) dat.live100.uiAccelCmd = float(LoC.Ui_accel_cmd) # lateral control state dat.live100.yActual = float(LaC.y_actual) dat.live100.yDes = float(LaC.y_des) dat.live100.upSteer = float(LaC.Up_steer) dat.live100.uiSteer = float(LaC.Ui_steer) # processed radar state, should add a_pcm? dat.live100.vTargetLead = float(plan.vTarget) dat.live100.aTargetMin = float(plan.aTargetMin) dat.live100.aTargetMax = float(plan.aTargetMax) dat.live100.jerkFactor = float(plan.jerkFactor) # lag dat.live100.cumLagMs = -rk.remaining*1000. live100.send(dat.to_bytes()) prof.checkpoint("Live100") # *** run loop at fixed rate *** if rk.keep_time(): prof.display()
def controlsd_thread(gctx=None, rate=100, default_bias=0.): gc.disable() # start the loop set_realtime_priority(3) context = zmq.Context() params = Params() # pub live100 = messaging.pub_sock(context, service_list['live100'].port) carstate = messaging.pub_sock(context, service_list['carState'].port) carcontrol = messaging.pub_sock(context, service_list['carControl'].port) livempc = messaging.pub_sock(context, service_list['liveMpc'].port) is_metric = params.get("IsMetric") == "1" passive = params.get("Passive") != "0" if not passive: while 1: try: sendcan = messaging.pub_sock(context, service_list['sendcan'].port) break except zmq.error.ZMQError: kill_defaultd() else: sendcan = None # sub poller = zmq.Poller() thermal = messaging.sub_sock(context, service_list['thermal'].port, conflate=True, poller=poller) health = messaging.sub_sock(context, service_list['health'].port, conflate=True, poller=poller) cal = messaging.sub_sock(context, service_list['liveCalibration'].port, conflate=True, poller=poller) driver_monitor = messaging.sub_sock(context, service_list['driverMonitoring'].port, conflate=True, poller=poller) gps_location = messaging.sub_sock(context, service_list['gpsLocationExternal'].port, conflate=True, poller=poller) logcan = messaging.sub_sock(context, service_list['can'].port) CC = car.CarControl.new_message() CI, CP = get_car(logcan, sendcan, 1.0 if passive else None) if CI is None: raise Exception("unsupported car") # if stock camera is connected, then force passive behavior if not CP.enableCamera: passive = True sendcan = None if passive: CP.safetyModel = car.CarParams.SafetyModels.noOutput fcw_enabled = params.get("IsFcwEnabled") == "1" geofence = None PL = Planner(CP, fcw_enabled) LoC = LongControl(CP, CI.compute_gb) VM = VehicleModel(CP) LaC = LatControl(VM) AM = AlertManager() driver_status = DriverStatus() if not passive: AM.add("startup", False) # write CarParams params.put("CarParams", CP.to_bytes()) state = State.disabled soft_disable_timer = 0 v_cruise_kph = 255 v_cruise_kph_last = 0 overtemp = False free_space = False cal_status = Calibration.INVALID cal_perc = 0 mismatch_counter = 0 low_battery = False rk = Ratekeeper(rate, print_delay_threshold=2. / 1000) # learned angle offset angle_offset = default_bias calibration_params = params.get("CalibrationParams") if calibration_params: try: calibration_params = json.loads(calibration_params) angle_offset = calibration_params["angle_offset2"] except (ValueError, KeyError): pass prof = Profiler(False) # off by default # Setup for real-time tuning rt_tuning_file = '/data/.openpilot_rtt_params.pkl' rtt_params = {} last_mod_time = 0 while 1: prof.checkpoint("Ratekeeper", ignore=True) # sample data and compute car events CS, events, cal_status, cal_perc, overtemp, free_space, low_battery, mismatch_counter = data_sample( CI, CC, thermal, cal, health, driver_monitor, gps_location, poller, cal_status, cal_perc, overtemp, free_space, low_battery, driver_status, geofence, state, mismatch_counter, params) prof.checkpoint("Sample") # define plan plan, plan_ts = calc_plan(CS, CP, events, PL, LaC, LoC, v_cruise_kph, driver_status, geofence) prof.checkpoint("Plan") if not passive: # update control state state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \ state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM) prof.checkpoint("State transition") # compute actuators actuators, v_cruise_kph, driver_status, angle_offset = state_control( plan, CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM, rk, driver_status, PL, LaC, LoC, VM, angle_offset, passive, is_metric, cal_perc) prof.checkpoint("State Control") # publish data CC = data_send(PL.perception_state, plan, plan_ts, CS, CI, CP, VM, state, events, actuators, v_cruise_kph, rk, carstate, carcontrol, live100, livempc, AM, driver_status, LaC, LoC, angle_offset, passive) prof.checkpoint("Sent") ###################### Real-Time Tuning Add-on ######################## # TODO: Move this into it's own function to clean things up # TODO: Need to delay until fingerprint, or is this after already? # Run this once per second... on frame 29, of course. if rk.frame % 100 == 29: # Get the last update time of our real-time tuning file #print('Real-Time Tuning: Checking tuning file modification time.') try: mod_time = os.path.getmtime(rt_tuning_file) #print('RTT mod_time: {0}'.format(mod_time)) except OSError: # File doesn't exist or is inaccessible mod_time = None print( 'Real-Time Tuning: RT_TUNING_FILE did not exist or was inaccessible.' ) # If rt_tuning_file doesn't exist, then create it from the current CarParams: if mod_time is None: rtt_params['steerKpBP'] = list( CP.steerKpBP ) # Note that the Kp/Ki are lists! But if you reference them directly they are <capnp list builder []>.. oops. rtt_params['steerKpV'] = list(CP.steerKpV) rtt_params['steerKiBP'] = list(CP.steerKiBP) rtt_params['steerKiV'] = list(CP.steerKiV) rtt_params['steerKf'] = CP.steerKf # TODO: Give the option to link the front and rear tire stiffness changes together rtt_params['tireStiffnessFront'] = CP.tireStiffnessFront rtt_params['tireStiffnessRear'] = CP.tireStiffnessRear rtt_params['steerRatio'] = CP.steerRatio rtt_params['steerRateCost'] = CP.steerRateCost rtt_params['latPidDeadzone'] = 0.0 rtt_params['steerActuatorDelay'] = CP.steerActuatorDelay # rtt_params['Camera Offset'] = PL.PP.cam_offset # Write the pickle file # TODO: try/except the open with open(rt_tuning_file, "wb") as f_write: pickle.dump( rtt_params, f_write, -1) # Dump to file with highest protocol (fastest) # No need to update next time if we just wrote the file out... last_mod_time = os.path.getmtime(rt_tuning_file) #print('RTT Last_mod_time: {0}'.format(last_mod_time)) # If file exists and has been updated since the last time we read it in elif last_mod_time != mod_time: print( 'Real-Time Tuning: Reading in the modified tuning file.') # Read in parameters from file # TODO: try/except the open with open(rt_tuning_file, "rb") as f_read: rtt_params = pickle.load(f_read) # Sanity check the data before setting it.. format is [min, max, failsafe] # Failsafe is used if a value is not found or if the value sent is out of the range limits rt_data_limits = { 'steerKpBP': [0.0, 67.0, 0.0], 'steerKpV': [0.0, 1.0, 0.2], 'steerKiBP': [0.0, 67.0, 0.0], 'steerKiV': [0.0, 1.0, 0.05], 'steerKf': [0.0, 0.001, 0.00005], 'tireStiffnessFront': [20000, 1000000, 192150], 'tireStiffnessRear': [20000, 1000000, 202500], 'steerRatio': [8.0, 25.0, 14.0], 'steerRateCost': [0.05, 1.0, 0.5], 'latPidDeadzone': [0.0, 4.0, 0.0], 'steerActuatorDelay': [0.0, 0.5, 0.1] # 'Camera Offset': [ -0.2, 0.2, 0.06 ] } # Do the checks and set the values for key in rt_data_limits: rt_val = rtt_params.get(key) if rt_val is None: # If this key from data limits doesn't exist in our tuning data, then add it as the failsafe # TODO: Use CP value here instead of failsafe? rtt_params[key] = rt_data_limits[key][2] print( 'Real-Time Tuning: Value did not exist in tuning file, replaced with failsafe. Key: ' + key) continue # If it does exist, then check the values. First see if it's a list try: # If it's an iterable list... for i, val2 in enumerate(rt_val): # Check each value in the list if (val2 < rt_data_limits[key][0]) or ( val2 > rt_data_limits[key][1]): rt_val[i] = rt_data_limits[key][2] print( 'Real-Time Tuning: Invalid value replaced! Key: ' + key) except: # Not interable, compare it and fix if necessary if (rt_val < rt_data_limits[key][0]) or ( rt_val > rt_data_limits[key][1]): rt_val = rt_data_limits[key][2] print( 'Real-Time Tuning: Invalid value replaced! Key: ' + key) # Set it back so if anything was fixed we have the updated value rtt_params[key] = rt_val # Update CP with the new params CP.steerKpBP = rtt_params['steerKpBP'] CP.steerKpV = rtt_params['steerKpV'] CP.steerKiBP = rtt_params['steerKiBP'] CP.steerKiV = rtt_params['steerKiV'] CP.steerKf = rtt_params['steerKf'] CP.tireStiffnessFront = rtt_params['tireStiffnessFront'] CP.tireStiffnessRear = rtt_params['tireStiffnessRear'] CP.steerRatio = rtt_params['steerRatio'] CP.steerActuatorDelay = rtt_params['steerActuatorDelay'] if CP.steerRateCost != rtt_params['steerRateCost']: print(CP.steerRateCost) print(rtt_params['steerRateCost']) CP.steerRateCost = rtt_params['steerRateCost'] rt_mpc_flag = True print( 'Real-Time Tuning: CP.steerRateCost changed - Re-initializing lateral MPC.' ) else: rt_mpc_flag = False # TODO: try/except the open # Write the pickle file back so if we fixed any data errors the revised values will show up on the client-side with open(rt_tuning_file, "wb") as f_write: pickle.dump( rtt_params, f_write, -1) # Dump to file with highest protocol (fastest) # Set the last modified time to this write.... we don't need to read back in what we just wrote out # Only set this if we were able to successfully make the write (once the try/except is added) last_mod_time = os.path.getmtime(rt_tuning_file) # Make updates in latcontrol, etc. I'm not sure if this is actually necessary, depends on if the objects are referenced or not. Anyway, one less thing to debug atm. VM.update_rt_params(CP) LaC.update_rt_params(VM, rt_mpc_flag, deadzone=rtt_params['latPidDeadzone']) #PL.PP.update_rt_params(rtt_params['Camera Offset']) #print('RTT Last_mod_time: {0}'.format(last_mod_time)) ####### END OF REAL-TIME TUNING ADD-ON ####### # *** run loop at fixed rate *** rk.keep_time() prof.display()
def controlsd_thread(gctx=None, rate=100): gc.disable() # start the loop set_realtime_priority(3) ##### AS context = zmq.Context() live100 = messaging.pub_sock(context, service_list['live100'].port) carstate = messaging.pub_sock(context, service_list['carState'].port) carcontrol = messaging.pub_sock(context, service_list['carControl'].port) carla_socket = context.socket(zmq.PAIR) carla_socket.bind("tcp://*:5560") is_metric = True passive = True ##### AS # No sendcan if passive if not passive: sendcan = messaging.pub_sock(context, service_list['sendcan'].port) else: sendcan = None # Sub sockets poller = zmq.Poller() #thermal = messaging.sub_sock(context, service_list['thermal'].port, conflate=True, poller=poller) #health = messaging.sub_sock(context, service_list['health'].port, conflate=True, poller=poller) cal = messaging.sub_sock(context, service_list['liveCalibration'].port, conflate=True, poller=poller) #driver_monitor = messaging.sub_sock(context, service_list['driverMonitoring'].port, conflate=True, poller=poller) plan_sock = messaging.sub_sock(context, service_list['plan'].port, conflate=True, poller=poller) path_plan_sock = messaging.sub_sock(context, service_list['pathPlan'].port, conflate=True, poller=poller) #logcan = messaging.sub_sock(context, service_list['can'].port) CC = car.CarControl.new_message() CP = ToyotaInterface.get_params("TOYOTA PRIUS 2017", {}) CP.steerRatio = 1.0 CI = ToyotaInterface(CP, sendcan) if CI is None: raise Exception("unsupported car") # if stock camera is connected, then force passive behavior if not CP.enableCamera: passive = True sendcan = None if passive: CP.safetyModel = car.CarParams.SafetyModels.noOutput LoC = LongControl(CP, CI.compute_gb) VM = VehicleModel(CP) LaC = LatControl(CP) AM = AlertManager() if not passive: AM.add("startup", False) state = State.enabled soft_disable_timer = 0 v_cruise_kph = 50 ##### !!! change v_cruise_kph_last = 0 ##### !! change cal_status = Calibration.INVALID cal_perc = 0 plan = messaging.new_message() plan.init('plan') path_plan = messaging.new_message() path_plan.init('pathPlan') rk = Ratekeeper(rate, print_delay_threshold=2. / 1000) angle_offset = 0. prof = Profiler(False) # off by default startup = True ##### AS while True: start_time = int(sec_since_boot() * 1e9) prof.checkpoint("Ratekeeper", ignore=True) # Sample data and compute car events CS, events, cal_status, cal_perc, plan, path_plan =\ data_sample(CI, CC, plan_sock, path_plan_sock, cal, poller, cal_status, cal_perc, state, plan, path_plan, v_cruise_kph) prof.checkpoint("Sample") ##### AS since we dont do preenabled state if startup: LaC.reset() LoC.reset(v_pid=CS.vEgo) if cal_status != Calibration.CALIBRATED: continue startup = False path_plan_age = (start_time - path_plan.logMonoTime) / 1e9 plan_age = (start_time - plan.logMonoTime) / 1e9 if not path_plan.pathPlan.valid or plan_age > 0.5 or path_plan_age > 0.5: print 'planner time too long' #events.append(create_event('plannerError', [ET.NO_ENTRY, ET.SOFT_DISABLE])) events += list(plan.plan.events) # Only allow engagement with brake pressed when stopped behind another stopped car #if CS.brakePressed and plan.plan.vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3: # events.append(create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) if not passive: # update control state state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \ state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM) prof.checkpoint("State transition") # Compute actuators (runs PID loops and lateral MPC) actuators, v_cruise_kph, angle_offset, v_acc, a_acc = \ state_control(plan.plan, path_plan.pathPlan, CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM, rk, LaC, LoC, VM, angle_offset, passive, is_metric, cal_perc) prof.checkpoint("State Control") # Publish data CC = data_send(plan, path_plan, CS, CI, CP, VM, state, events, actuators, v_cruise_kph, rk, carstate, carcontrol, live100, AM, LaC, LoC, angle_offset, passive, start_time, v_acc, a_acc, carla_socket) prof.checkpoint("Sent") rk.keep_time() # Run at 100Hz, no 20 Hz prof.display()
## D-Pad (left) elif event.code == 16: print event.value axis_values[5] = -int(event.value) elif event.code == 17: axis_values[6] = -int(event.value) print axis_values, button_values # ***** control the car ***** CC = car.CarControl.new_message() if not passive: AM.add("startup", False) actuators = car.CarControl.Actuators.new_message() actuators.gas = float(np.clip(-axis_values[0], 0, 1.0)) actuators.brake = float(np.clip(axis_values[0], 0, 1.0)) actuators.steer = float(axis_values[2]) CC.enabled = True CC.actuators = actuators # CC.cruiseControl.override = True CC.cruiseControl.override = bool(button_values[1]) CC.cruiseControl.cancel = bool(button_values[3]) # always cancel if we have an interceptor #CC.cruiseControl.cancel = not CP.enableCruise or (not isEnabled(state) and CS.cruiseState.enabled)
def controlsd_thread(gctx=None): setproctitle('controlsd') params = Params() print(params) # Pub Sockets profiler = Profiler(True, 'controls') sendcan = messaging.pub_sock(service_list['sendcan'].port) controlsstate = messaging.pub_sock(service_list['controlsState'].port) carstate = None #messaging.pub_sock(service_list['carState'].port) carcontrol = messaging.pub_sock(service_list['carControl'].port) carevents = messaging.pub_sock(service_list['carEvents'].port) carparams = messaging.pub_sock(service_list['carParams'].port) sm = messaging.SubMaster(['pathPlan', 'health', 'gpsLocationExternal']) can_sock = messaging.sub_sock(service_list['can'].port) hw_type = messaging.recv_one(sm.sock['health']).health.hwType is_panda_black = hw_type == log.HealthData.HwType.blackPanda print("panda black: ", is_panda_black) wait_for_can(can_sock) CI, CP = get_car(can_sock, sendcan, is_panda_black) #logcan.close() # TODO: Use the logcan socket from above, but that will currenly break the tests #can_timeout = None #if os.environ.get('NO_CAN_TIMEOUT', False) else 100 #can_sock = messaging.sub_sock(service_list['can'].port, timeout=can_timeout) # Write CarParams for radard and boardd safety mode params.put("CarParams", CP.to_bytes()) params.put("LongitudinalControl", "1" if CP.openpilotLongitudinalControl else "0") CC = car.CarControl.new_message() AM = AlertManager() startup_alert = get_startup_alert(True, True) AM.add(sm.frame, startup_alert, False) LaC = LatControlPID(CP) lateral = Lateral(CP) lkasMode = int(float(LaC.kegman.conf['lkasMode'])) #CI.CS.lkasMode = (lkasMode == 0) lac_log = None #car.CarState.lateralControlState.pidState.new_message() state = State.disabled soft_disable_timer = 0 v_cruise_kph = 255 events_prev = [] frame = 0 sm['pathPlan'].sensorValid = True sm['pathPlan'].posenetValid = True while True: start_time = 0 # time.time() #sec_since_boot() # Sample data and compute car events CS, events = data_sample(CI, CC, can_sock, carstate, lac_log, lateral, sm, profiler) profiler.checkpoint('data_sample') state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \ state_transition(sm.frame, CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM) profiler.checkpoint('state_transition') # Compute actuators (runs PID loops and lateral MPC) sm.update(0) profiler.checkpoint('sm_update') actuators, lac_log = state_control(sm.frame, lkasMode, sm['pathPlan'], CS, CP, state, events, AM, LaC, lac_log, profiler) profiler.checkpoint('state_control') # Publish data CC, events_prev = data_send(sm, CS, CI, CP, state, events, actuators, carstate, carcontrol, carevents, carparams, controlsstate, sendcan, AM, LaC, start_time, lac_log, events_prev, profiler) profiler.checkpoint('data_send') frame += 1 if frame % 10000 == 0 and profiler.enabled: profiler.display() profiler.reset(True)
def controlsd_thread(gctx=None): gc.disable() # start the loop set_realtime_priority(3) context = zmq.Context() params = Params() # Pub Sockets controlsstate = messaging.pub_sock(context, service_list['controlsState'].port) carstate = messaging.pub_sock(context, service_list['carState'].port) carcontrol = messaging.pub_sock(context, service_list['carControl'].port) is_metric = params.get("IsMetric") == "1" passive = params.get("Passive") != "0" sendcan = messaging.pub_sock(context, service_list['sendcan'].port) # Sub sockets poller = zmq.Poller() thermal = messaging.sub_sock(context, service_list['thermal'].port, conflate=True, poller=poller) health = messaging.sub_sock(context, service_list['health'].port, conflate=True, poller=poller) cal = messaging.sub_sock(context, service_list['liveCalibration'].port, conflate=True, poller=poller) driver_monitor = messaging.sub_sock(context, service_list['driverMonitoring'].port, conflate=True, poller=poller) plan_sock = messaging.sub_sock(context, service_list['plan'].port, conflate=True, poller=poller) path_plan_sock = messaging.sub_sock(context, service_list['pathPlan'].port, conflate=True, poller=poller) logcan = messaging.sub_sock(context, service_list['can'].port) CC = car.CarControl.new_message() CI, CP = get_car(logcan, sendcan) AM = AlertManager() car_recognized = CP.carName != 'mock' # If stock camera is disconnected, we loaded car controls and it's not chffrplus controller_available = CP.enableCamera and CI.CC is not None and not passive read_only = not car_recognized or not controller_available if read_only: CP.safetyModel = car.CarParams.SafetyModels.elm327 # diagnostic only startup_alert = get_startup_alert(car_recognized, controller_available) AM.add(startup_alert, False) LoC = LongControl(CP, CI.compute_gb) VM = VehicleModel(CP) if CP.lateralTuning.which() == 'pid': LaC = LatControlPID(CP) else: LaC = LatControlINDI(CP) driver_status = DriverStatus() # Write CarParams for radard and boardd safety mode params.put("CarParams", CP.to_bytes()) params.put("LongitudinalControl", "1" if CP.openpilotLongitudinalControl else "0") state = State.disabled soft_disable_timer = 0 v_cruise_kph = 255 v_cruise_kph_last = 0 overtemp = False free_space = False cal_status = Calibration.INVALID cal_perc = 0 mismatch_counter = 0 low_battery = False rcv_times = defaultdict(int) plan = messaging.new_message() plan.init('plan') path_plan = messaging.new_message() path_plan.init('pathPlan') path_plan.pathPlan.sensorValid = True # controlsd is driven by can recv, expected at 100Hz rk = Ratekeeper(100, print_delay_threshold=None) controls_params = params.get("ControlsParams") # Read angle offset from previous drive angle_model_bias = 0. if controls_params is not None: try: controls_params = json.loads(controls_params) angle_model_bias = controls_params['angle_model_bias'] except (ValueError, KeyError): pass prof = Profiler(False) # off by default while True: start_time = sec_since_boot() prof.checkpoint("Ratekeeper", ignore=True) # Sample data and compute car events CS, events, cal_status, cal_perc, overtemp, free_space, low_battery, mismatch_counter, plan, path_plan =\ data_sample(rcv_times, CI, CC, plan_sock, path_plan_sock, thermal, cal, health, driver_monitor, poller, cal_status, cal_perc, overtemp, free_space, low_battery, driver_status, state, mismatch_counter, params, plan, path_plan) prof.checkpoint("Sample") # Create alerts path_plan_age = start_time - rcv_times['pathPlan'] plan_age = start_time - rcv_times['plan'] if not path_plan.pathPlan.valid or plan_age > 0.5 or path_plan_age > 0.5: events.append( create_event('plannerError', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if not path_plan.pathPlan.sensorValid: events.append( create_event('sensorDataInvalid', [ET.NO_ENTRY, ET.PERMANENT])) if not path_plan.pathPlan.paramsValid: events.append(create_event('vehicleModelInvalid', [ET.WARNING])) if not path_plan.pathPlan.modelValid: events.append( create_event('modelCommIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if not plan.plan.radarValid: events.append( create_event('radarFault', [ET.NO_ENTRY, ET.SOFT_DISABLE])) if plan.plan.radarCommIssue: events.append( create_event('radarCommIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE])) # Only allow engagement with brake pressed when stopped behind another stopped car if CS.brakePressed and plan.plan.vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3: events.append( create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE])) if not read_only: # update control state state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \ state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM) prof.checkpoint("State transition") # Compute actuators (runs PID loops and lateral MPC) actuators, v_cruise_kph, driver_status, angle_model_bias, v_acc, a_acc, lac_log = \ state_control(rcv_times, plan.plan, path_plan.pathPlan, CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM, rk, driver_status, LaC, LoC, VM, angle_model_bias, read_only, is_metric, cal_perc) prof.checkpoint("State Control") # Publish data CC = data_send(plan, path_plan, CS, CI, CP, VM, state, events, actuators, v_cruise_kph, rk, carstate, carcontrol, controlsstate, sendcan, AM, driver_status, LaC, LoC, angle_model_bias, read_only, start_time, v_acc, a_acc, lac_log) prof.checkpoint("Sent") rk.monitor_time() prof.display()