def __init__(self):
## -----*----- コンストラクタ -----*----- ##
super().__init__()
# 分離器
self.infer = Separator()
# 親クラスのstreamとは異なる（Float32，rateが2倍）
self.f_stream = self._pa.open(
format=pyaudio.paFloat32,
channels=self.settings['channels'],
rate=self.settings['rate'] * 4,
input=True,
output=False,
frames_per_buffer=self.settings['chunk']
)
# 立ち上がり・下がり検出数
self.cnt_edge = {'up': 0, 'down': 0}
# 音量・閾値などの状態保管
self.state = {'amp': 0, 'total': 0, 'cnt': 0, 'border': 9999, 'average': 0}
# コンソール出力
self.console = Console('./config/outer.txt')
self.color_record = 90
self.color_separate = 90
self.is_separate = False
def __init__(self, is_filter=True):
## -----*----- コンストラクタ -----*----- ##
# 分離器
self.infer = Separator()
self._pa = pyaudio.PyAudio()
# 音声入力の設定
self.settings = {
'format': pyaudio.paInt16,
'channels': 1,
'rate': 8000,
'chunk': 1024
}
self.stream = self._pa.open(format=self.settings['format'],
channels=self.settings['channels'],
rate=self.settings['rate'],
input=True,
output=True,
frames_per_buffer=self.settings['chunk'])
# 音声波形を格納
self.wav = None
self.wav_separate = None
# フラグ一覧
self.is_filter = is_filter
self.is_input = True
self.is_separate = False
self.is_end_separate = False
self.strage = {
'original': np.zeros(1024 * 20),
'separated': np.zeros(1024 * 20)
}
def setup(self):
"""初期設定を行う"""
files = glob.glob("./audio/*")
if len(files) == 0:
print("audioディレクトリにwavファイルを置いてください")
exit(1)
self.separator = Separator(self.chunk // 2, 1, len(files))
for i, f in enumerate(files):
name = f.split("/")[-1].split('.')[0]
data, ch, fs = self.ac.read_wav(f)
spectrum = np.zeros((self.chunk // 2), dtype=np.float32)
for j in range(0, len(data), self.chunk // 2):
amp = self.calc_spectrum(data[j:j + self.chunk // 2])
spectrum += amp
self.separator.set_dictionary(spectrum / j, i, name=name)
def get_train_data(pad, mode):
# load data
train, test = load_data(CORPUS_PATH)
# init separator
sep = Separator(mode, SENTENCEPIECE_PATH)
sep.train(train)
sentencepiece = mode == "sentencepiece"
# split text
train = sep.sep_df_text(train, sentencepiece)
test = sep.sep_df_text(test, sentencepiece)
# word to id
str2idx = Str2idx(train)
n_vocab = str2idx.get_n_vocab()
train = str2idx(train, pad)
test = str2idx(test, pad)
return train, test, n_vocab
def entrypoint(arguments, params):
""" Command entrypoint.
:param arguments: Command line parsed argument as argparse.Namespace.
:param params: Deserialized JSON configuration file provided in CLI args.
"""
# TODO: check with output naming.
print('entrypoint')
print('inputs args:')
print(arguments.inputs)
print('audio adapter arguments:')
print(arguments.audio_adapter)
print('arguments config:')
print(arguments.configuration)
print('MWF arguments')
print(arguments.MWF)
print('stft backend arguments')
print(arguments.stft_backend)
audio_adapter = get_audio_adapter(arguments.audio_adapter)
print(audio_adapter)
print(audio_adapter.__dict__)
separator = Separator(arguments.configuration,
MWF=arguments.MWF,
stft_backend=arguments.stft_backend)
print(separator.__dict__)
for filename in arguments.inputs:
print('Todos los argumentos de separate_to_file:')
print(filename)
print(arguments.output_path)
print(audio_adapter)
print(arguments.offset)
print(arguments.duration)
print(arguments.codec)
print(arguments.bitrate)
print(arguments.filename_format)
separator.separate_to_file(filename,
arguments.output_path,
audio_adapter=audio_adapter,
offset=arguments.offset,
duration=arguments.duration,
codec=arguments.codec,
bitrate=arguments.bitrate,
filename_format=arguments.filename_format,
synchronous=False)
separator.join()
if to_int:
wav = np.array(wav, dtype='int16')
return wav
p = pyaudio.PyAudio()
CHUNK = 2048
stream = p.open(format=pyaudio.paInt16,
channels=1,
rate=8000,
frames_per_buffer=CHUNK,
input=True,
output=True)
infer = Separator()
while stream.is_active():
output = []
wav = np.fromstring(stream.read(CHUNK, exception_on_overflow=False),
np.int16)
print(wav.shape)
spec = stft(wav, False).T
spec_pred = stft(wav, True).T
for t in range(spec.shape[0]):
pred = infer.predict(spec_pred[t])
for i in range(129):
if pred[i] > 0.75:
spec[t][i] *= pred[i]
elif pred[i] > 0.5:
spec[t][i] *= 0.1
else:
class Filter(object):
def __init__(self, is_filter=True):
## -----*----- コンストラクタ -----*----- ##
# 分離器
self.infer = Separator()
self._pa = pyaudio.PyAudio()
# 音声入力の設定
self.settings = {
'format': pyaudio.paInt16,
'channels': 1,
'rate': 8000,
'chunk': 1024
}
self.stream = self._pa.open(format=self.settings['format'],
channels=self.settings['channels'],
rate=self.settings['rate'],
input=True,
output=True,
frames_per_buffer=self.settings['chunk'])
# 音声波形を格納
self.wav = None
self.wav_separate = None
# フラグ一覧
self.is_filter = is_filter
self.is_input = True
self.is_separate = False
self.is_end_separate = False
self.strage = {
'original': np.zeros(1024 * 20),
'separated': np.zeros(1024 * 20)
}
def exe(self):
## -----*----- 処理実行 -----*----- ##
thread = threading.Thread(target=self.audio_input)
thread.start()
thread = threading.Thread(target=self.audio_seaprate)
thread.start()
self.audio_output()
def graphplot(self):
if not self.is_end_separate:
return
self.strage['original'] = np.append(
np.delete(self.strage['original'], range(1024)), self.wav)
self.strage['separated'] = np.append(
np.delete(self.strage['separated'], range(1024)),
self.wav_separate)
plt.clf()
# Original
plt.subplot(311)
plt.specgram(self.strage['original'], Fs=self.settings['rate'])
# Separated
plt.subplot(312)
plt.specgram(self.strage['separated'], Fs=self.settings['rate'])
# Pause
plt.pause(.01)
def audio_input(self):
## -----*----- 音声入力 -----*----- ##
while self.stream.is_active():
self.wav = np.fromstring(
self.stream.read(self.settings['chunk'],
exception_on_overflow=False), np.int16)
self.graphplot()
# 録音開始フラグ反転
self.is_input = False
self.is_separate = True
def audio_output(self):
## -----*----- 音声出力 -----*----- ##
while self.stream.is_active():
if not self.is_input:
# 録音開始フラグ反転
self.is_input = True
# 再生
if self.is_end_separate:
output = b''.join(self.wav_separate)
self.stream.write(output)
def audio_seaprate(self):
## -----*----- 音声分離 -----*----- ##
while self.stream.is_active():
if self.is_separate:
spec = self.infer.stft(self.wav, to_log=False).T
spec_pred = self.infer.stft(self.wav, to_log=True).T
# 分離
if self.is_filter:
for t in range(spec.shape[0]):
pred = self.infer.predict(spec_pred[t])
n = 0
for i in range(129):
# 低周波成分をカット
if n < 2:
spec[t][i] = 0
n += 1
continue
if pred[i] > 0.8:
spec[t][i] *= 1.0
elif pred[i] > 0.75:
spec[t][i] *= pred[i]
elif pred[i] > 0.6:
spec[t][i] *= 0.005
elif pred[i] > 0.5:
spec[t][i] *= 0.002
else:
spec[t][i] *= 0.001
self.wav_separate = self.infer.istft(spec.T)
self.is_separate = False
self.is_end_separate = True
class RealTimeAudioSeparator(object):
def __init__(self, chunk=1024):
"""コンストラクタ
Keyword Arguments:
chunk {int} -- バッファサイズ (default: {1024})
"""
self.chunk = chunk
self.ac = AudioController()
self.buffer = np.zeros((self.chunk), dtype=np.float32)
self.window_func = np.hamming(self.chunk)
self.osc = OscClient("localhost", 5000)
self.separate_results = None
self.timbers = None
self.separate_flag = True
self.sep_thread = None
self.osc_thread = None
def calc_spectrum(self, data):
"""スペクトルを計算する
Arguments:
data {numpy.array} -- 入力データ
Returns:
numpy.array -- スペクトル
"""
self.buffer[:self.chunk // 2] = self.buffer[self.chunk // 2:]
self.buffer[self.chunk // 2:] = data
F = np.fft.fft(self.buffer * self.window_func)
amp = np.abs(F)[:self.chunk // 2]
return amp / np.sum(amp)
def setup(self):
"""初期設定を行う"""
files = glob.glob("./audio/*")
if len(files) == 0:
print("audioディレクトリにwavファイルを置いてください")
exit(1)
self.separator = Separator(self.chunk // 2, 1, len(files))
for i, f in enumerate(files):
name = f.split("/")[-1].split('.')[0]
data, ch, fs = self.ac.read_wav(f)
spectrum = np.zeros((self.chunk // 2), dtype=np.float32)
for j in range(0, len(data), self.chunk // 2):
amp = self.calc_spectrum(data[j:j + self.chunk // 2])
spectrum += amp
self.separator.set_dictionary(spectrum / j, i, name=name)
def run(self):
"""処理を開始する"""
print("======================= RUN =======================")
self.ac.setup_stream(chunck=self.chunk // 2)
with conf.ThreadPoolExecutor(max_workers=2) as executor:
self.start_separate(executor)
while True:
print("> ", end="")
line = input()
if line == 'a':
self.stop_separate(executor)
self.add_timber()
self.start_separate(executor)
elif line == 'c':
self.stop_separate(executor)
self.change_timber()
self.start_separate(executor)
elif line == 'q':
self.stop_separate(executor)
break
elif line == 's':
self.print_timber_list()
elif line == 'h':
print('\'a\' is add timber.')
print('\'c\' is change timber.')
print('\'s\' is show timber list.')
print('\'q\' is shutdown application.')
self.ac.close_stream()
def print_countdown(self):
"""録音時のカウントダウンを表示する"""
print('please input audio {}[sec]!!!'.format(TIME))
print('============3============')
time.sleep(1)
print('============2============')
time.sleep(1)
print('============1============')
time.sleep(1)
print('RECORD!!')
def print_timber_list(self):
"""現在の音色のリストを表示する"""
timbers = self.separator.get_timber()
for k, v in timbers.items():
print("Timber:{} : {}".format(k, v))
def add_timber(self):
"""音色を追加する"""
self.print_countdown()
spectrum = self.record()
self.separator.add_dictionary(spectrum)
print("finish add")
def change_timber(self):
"""登録してある音色を変更する"""
timber_index = -1
timber_name = None
while True:
print(
'Please input [timber_index,timber_name] to change. (cancel is [q] key)'
)
self.print_timber_list()
print("> ", end="")
line = input()
if len(line.split(",")) != 2 and line != 'q':
continue
if line == 'q':
return
if not line.split(",")[0].isdecimal():
continue
timber_index, timber_name = int(
line.split(",")[0]), line.split(",")[1]
if (timber_index > len(self.separator.get_timber()) - 1) or (
timber_index < 0):
print('[error] index out of range.')
continue
break
self.print_countdown()
spectrum = self.record()
self.separator.set_dictionary(spectrum, timber_index, name=timber_name)
print('finish change')
def record(self):
"""録音する
Returns:
numpy.array -- スペクトル
"""
counter = 0
it = 0
spectrum = np.zeros((self.chunk // 2), dtype=np.float32)
self.ac.clear_buffer()
self.ac.start_stream()
while counter < TIME:
if self.ac.q.__len__() > 0:
data = self.ac.q.popleft()
spectrum += self.calc_spectrum(data)
counter += self.ac.chunk / self.ac.rate
it += 1
self.ac.stop_stream()
return spectrum / it
def start_separate(self, executor):
"""スレッド処理を開始する
Arguments:
executor {conf.ThreadPoolExecutor} -- confインスタンス
"""
self.timbers = self.separator.get_timber()
if "noise" not in list(self.timbers.values()):
self.timbers[len(self.timbers)] = "noise"
msg = [len(self.timbers)]
msg.extend([v for v in self.timbers.values()])
self.osc.send(OSC_TIMBER_ADDR, msg)
self.ac.clear_buffer()
self.ac.start_stream()
self.separate_flag = True
self.sep_thread = executor.submit(self.separate_sound)
self.osc_thread = executor.submit(self.send_result)
def stop_separate(self, executor):
"""スレッド処理を停止する
Arguments:
executor {conf.ThreadPoolExecutor} -- confインスタンス
"""
self.separate_flag = False
self.sep_thread.result()
self.sep_thread = None
self.osc_thread.result()
self.osc_thread = None
self.ac.clear_buffer()
self.ac.stop_stream()
def separate_sound(self):
"""音源分離を行う"""
while self.separate_flag:
if self.ac.q.__len__() > 0:
data = self.ac.q.popleft()
spectrum = self.calc_spectrum(data)
self.separate_results = self.separator.separate(spectrum)
def send_result(self):
"""音源分離の結果を送信する"""
while self.separate_flag:
response = []
if self.separate_results is None:
continue
if self.separate_results.shape[0] != len(self.timbers):
continue
for i, _ in enumerate(self.timbers.values()):
response.append(self.separate_results[i][0])
self.osc.send(OSC_RESULT_ADDR, response)
time.sleep(OSC_FREQ)
class Filter(object):
def __init__(self, is_filter=True):
## -----*----- コンストラクタ -----*----- ##
# 分離器
self.infer = Separator()
self._pa = pyaudio.PyAudio()
# 音声入力の設定
self.settings = {
'format': pyaudio.paInt16,
'channels': 1,
'rate': 8000,
'chunk': 1024
}
self.stream = self._pa.open(format=self.settings['format'],
channels=self.settings['channels'],
rate=self.settings['rate'],
input=True,
output=True,
frames_per_buffer=self.settings['chunk'])
# 音声波形を格納
self.wav = None
self.wav_separate = None
# フラグ一覧
self.is_filter = is_filter
self.is_input = True
self.is_separate = False
self.is_end_separate = False
def exe(self):
## -----*----- 処理実行 -----*----- ##
thread = threading.Thread(target=self.audio_input)
thread.start()
thread = threading.Thread(target=self.audio_seaprate)
thread.start()
self.audio_output()
def audio_input(self):
## -----*----- 音声入力 -----*----- ##
while self.stream.is_active():
self.wav = np.fromstring(
self.stream.read(self.settings['chunk'],
exception_on_overflow=False), np.int16)
# 録音開始フラグ反転
self.is_input = False
self.is_separate = True
def audio_output(self):
## -----*----- 音声出力 -----*----- ##
while self.stream.is_active():
if not self.is_input:
# 録音開始フラグ反転
self.is_input = True
# 再生
if self.is_end_separate:
output = b''.join(self.wav_separate)
self.stream.write(output)
def audio_seaprate(self):
## -----*----- 音声分離 -----*----- ##
while self.stream.is_active():
if self.is_separate:
spec = self.infer.stft(self.wav, to_log=False).T
spec_pred = self.infer.stft(self.wav, to_log=True).T
# 分離
if self.is_filter:
for t in range(spec.shape[0]):
pred = self.infer.predict(spec_pred[t])
for i in range(129):
if pred[i] > 0.75:
spec[t][i] *= pred[i]
elif pred[i] > 0.5:
spec[t][i] *= 0.1
else:
spec[t][i] = 0
self.wav_separate = self.infer.istft(spec.T)
self.is_separate = False
self.is_end_separate = True
def add_separator_horizontal(self, position):
separator = Separator()
separator.position = position
separator.direction = HORIZONTAL
self.separators.append(separator)
self.handler.control.append(separator.control)
# -*- coding: utf-8 -*-
from separator import Separator
if __name__ == '__main__':
Separator(True)
def setUp(self):
self.x = Separator()
class MelBank(Recording):
def __init__(self):
## -----*----- コンストラクタ -----*----- ##
super().__init__()
# 分離器
self.infer = Separator()
# 親クラスのstreamとは異なる（Float32，rateが2倍）
self.f_stream = self._pa.open(
format=pyaudio.paFloat32,
channels=self.settings['channels'],
rate=self.settings['rate'] * 4,
input=True,
output=False,
frames_per_buffer=self.settings['chunk']
)
# 立ち上がり・下がり検出数
self.cnt_edge = {'up': 0, 'down': 0}
# 音量・閾値などの状態保管
self.state = {'amp': 0, 'total': 0, 'cnt': 0, 'border': 9999, 'average': 0}
# コンソール出力
self.console = Console('./config/outer.txt')
self.color_record = 90
self.color_separate = 90
self.is_separate = False
def start(self):
## -----*----- 検出スタート -----*----- ##
time.sleep(self.settings['past_second'])
# 閾値の更新を行うサブスレッドの起動
thread = threading.Thread(target=self.update_border)
thread.start()
self.pastTime = time.time()
while not self.is_exit:
try:
if time.time() - self.pastTime > 0.5:
self.reset_state()
self.state['cnt'] += 1
self.detection()
sys.stdout.flush()
except KeyboardInterrupt:
os.system('clear')
self.is_exit = True
def detection(self):
## -----*----- 立ち上がり・立ち下がり検出 -----*----- ##
voiceData = np.fromstring(self.f_stream.read(self.settings['chunk'], exception_on_overflow=False), np.float32)
voiceData *= np.hanning(self.settings['chunk'])
# 振幅スペクトル（0~8000[Hz]）
x = np.fft.fft(voiceData)
# パワースペクトル
amplitudeSpectrum = [np.sqrt(c.real ** 2 + c.imag ** 2) for c in x]
# バンドパスフィルタ（100~5000[Hz]）
amplitudeSpectrum = amplitudeSpectrum[
int((self.settings['chunk'] / (self.settings['rate'] * 2)) * 100):
int((self.settings['chunk'] / (self.settings['rate'] * 2)) * 5000)]
# Amp値・平均値の算出
self.state['amp'] = sum(amplitudeSpectrum)
self.state['total'] += self.state['amp']
self.state['average'] = self.state['total'] / self.state['cnt']
# コンソール出力
self.console.draw(int(self.state['average']), int(self.state['amp']), int(self.state['border']),
'\033[{0}m録音中\033[0m'.format(self.color_record), '\033[{0}m分離中\033[0m'.format(self.color_separate), *self.meter())
if self.is_separate and self.record_end.is_set():
thread = threading.Thread(target=self.separator)
thread.start()
self.is_separate = False
else:
# 立ち上がり検出
if self.up_edge() and self.record_end.is_set() and self.color_separate == 90:
self.record_start.set()
self.record_end.clear()
self.state['border'] = self.state['average']
self.color_record = 32
if self.down_edge() and (not self.record_end.is_set()):
self.record_start.clear()
self.reset_state()
self.color_record = 90
self.is_separate = True
self.color_separate = 32
def up_edge(self):
## -----*----- 立ち上がり検出 -----*----- ##
if not self.record_start.is_set():
if self.state['amp'] >= self.state['border']:
self.cnt_edge['up'] += 1
if self.cnt_edge['up'] > 5:
return True
return False
def down_edge(self):
## -----*----- 立ち下がり検出 -----*----- ##
if self.record_start.is_set():
if self.state['average'] <= self.state['border']:
self.cnt_edge['down'] += 1
if self.cnt_edge['down'] > 10:
self.cnt_edge['up'] = self.cnt_edge['down'] = 0
return True
return False
def reset_state(self):
## -----*----- 状態のリセット -----*----- ##
self.state['total'] = self.state['average'] * 15
self.state['cnt'] = 15
if self.state['average'] >= self.state['amp']:
self.cnt_edge['up'] = 0
self.pastTime = time.time()
def update_border(self):
## -----*----- 閾値の更新 -----*----- ##
offset = range(50, 201, 10)
while not self.is_exit:
time.sleep(0.2)
if self.cnt_edge['up'] < 3 and not self.record_start.is_set():
if int(self.state['average'] / 20) > len(offset) - 1:
i = len(offset) - 1
else:
i = int(self.state['average'] / 20)
self.state['border'] = pow(10, 1.13) * pow(self.state['average'], 0.72)
def meter(self):
## -----*----- 音量メーター生成 -----*----- ##
meter = [''] * 3
keys = ['average', 'amp', 'border']
for i in range(3):
for j in range(int(self.state[keys[i]] / 20 + 3)):
meter[i] += '■'
if self.record_start.is_set():
if self.state['average'] >= self.state['border']:
meter[0] = '\033[94m' + meter[0] + '\033[0m'
elif self.state['amp'] >= self.state['border']:
meter[1] = '\033[94m' + meter[1] + '\033[0m'
return meter
def separator(self):
## -----*----- 音楽分離 -----*----- ##
self.infer.separate(self.file)
self.player('./tmp/separate.wav')
self.color_separate = 90
return
def player(self, path):
## -----*----- 音楽再生 -----*----- ##
pa = pyaudio.PyAudio()
wavFile = wave.open(path, 'rb')
stream = pa.open(
format=pa.get_format_from_width(wavFile.getsampwidth()),
channels=wavFile.getnchannels(),
rate=wavFile.getframerate(),
output=True,
)
voiceData = wavFile.readframes(self.settings['chunk'])
while len(voiceData) > 0:
stream.write(voiceData)
voiceData = wavFile.readframes(self.settings['chunk'])
stream.stop_stream()
stream.close()
pa.terminate()
def add_separator_horizontal(self, position):
separator = Separator()
separator.position = position
separator.direction = HORIZONTAL
self.separators.append(separator)
self.handler.control.append(separator.control)
def add_separator_vertical(self, position):
separator = Separator()
separator.position = position
separator.direction = VERTICAL
self.separators.append(separator)
self.handler.control.append(separator.control)
def add_separator_vertical(self, position):
separator = Separator()
separator.position = position
separator.direction = VERTICAL
self.separators.append(separator)
self.handler.control.append(separator.control)
stream = pa.open(
format=pa.get_format_from_width(wavFile.getsampwidth()),
channels=wavFile.getnchannels(),
rate=wavFile.getframerate(),
output=True,
)
voiceData = wavFile.readframes(1024)
while len(voiceData) > 0:
stream.write(voiceData)
voiceData = wavFile.readframes(1024)
stream.stop_stream()
stream.close()
pa.terminate()
infer = Separator()
record = Recording()
os.system('clear')
print('*** ENTERを押して録音開始・終了 ***')
mode = 0 # 0：録音開始，1：録音終了
cnt = 1
while True:
key = input()
if mode == 0:
# 録音開始
print("===== {0} START ===============".format(cnt))
record.record_start.set()
