예제 #1
0
 def testcase_ATR5(self):
     """Demo Vitale online IGEA340"""
     a = ATR([0x3F, 0x65, 0x25, 0x00, 0x52, 0x09, 0x6A, 0x90, 0x00])
     historicalbytes = [0x52, 0x09, 0x6A, 0x90, 0x00]
     self.assertEquals(a.getHistoricalBytes(), historicalbytes)
     self.assertEquals(a.getChecksum(), None)
     self.assert_(a.isT0Supported())
     self.assert_(not a.isT1Supported())
     self.assert_(not a.isT15Supported())
예제 #2
0
 def testcase_ATR5(self):
     """Demo Vitale online IGEA340"""
     a = ATR([0x3F, 0x65, 0x25, 0x00, 0x52, 0x09, 0x6A, 0x90, 0x00])
     historicalbytes = [0x52, 0x09, 0x6A, 0x90, 0x00]
     self.assertEqual(a.getHistoricalBytes(), historicalbytes)
     self.assertEqual(a.getChecksum(), None)
     self.assertTrue(a.isT0Supported())
     self.assertTrue(not a.isT1Supported())
     self.assertTrue(not a.isT15Supported())
예제 #3
0
 def testcase_ATR2(self):
     """Palmera Protect V2."""
     a = ATR([0x3B, 0x65, 0x00, 0x00, 0x9C, 0x02, 0x02, 0x01, 0x02])
     historicalbytes = [0x9C, 0x02, 0x02, 0x01, 0x02]
     self.assertEqual(a.getHistoricalBytes(), historicalbytes)
     self.assertEqual(a.getChecksum(), None)
     self.assertTrue(a.isT0Supported())
     self.assertTrue(not a.isT1Supported())
     self.assertTrue(not a.isT15Supported())
예제 #4
0
 def testcase_ATR3(self):
     """Simera 3.13."""
     a = ATR([0x3B, 0x16, 0x18, 0x20, 0x02, 0x01, 0x00, 0x80, 0x0D])
     historicalbytes = [0x20, 0x02, 0x01, 0x00, 0x80, 0x0D]
     self.assertEqual(a.getHistoricalBytes(), historicalbytes)
     self.assertEqual(a.getChecksum(), None)
     self.assertTrue(a.isT0Supported())
     self.assertTrue(not a.isT1Supported())
     self.assertTrue(not a.isT15Supported())
예제 #5
0
 def testcase_ATR3(self):
     """Simera 3.13."""
     a = ATR([0x3B, 0x16, 0x18, 0x20, 0x02, 0x01, 0x00, 0x80, 0x0D])
     historicalbytes = [0x20, 0x02, 0x01, 0x00, 0x80, 0x0D]
     self.assertEquals(a.getHistoricalBytes(), historicalbytes)
     self.assertEquals(a.getChecksum(), None)
     self.assert_(a.isT0Supported())
     self.assert_(not a.isT1Supported())
     self.assert_(not a.isT15Supported())
예제 #6
0
 def testcase_ATR2(self):
     """Palmera Protect V2."""
     a = ATR([0x3B, 0x65, 0x00, 0x00, 0x9C, 0x02, 0x02, 0x01, 0x02])
     historicalbytes = [0x9C, 0x02, 0x02, 0x01, 0x02]
     self.assertEquals(a.getHistoricalBytes(), historicalbytes)
     self.assertEquals(a.getChecksum(), None)
     self.assert_(a.isT0Supported())
     self.assert_(not a.isT1Supported())
     self.assert_(not a.isT15Supported())
예제 #7
0
 def testcase_ATR4(self):
     """SIMRock'n Tree"""
     a = ATR([0x3B, 0x77, 0x94, 0x00, 0x00, 0x82, 0x30, 0x00, 0x13,
         0x6C, 0x9F, 0x22])
     historicalbytes = [0x82, 0x30, 0x00, 0x13, 0x6C, 0x9F, 0x22]
     self.assertEquals(a.getHistoricalBytes(), historicalbytes)
     self.assertEquals(a.getChecksum(), None)
     self.assert_(a.isT0Supported())
     self.assert_(not a.isT1Supported())
     self.assert_(not a.isT15Supported())
예제 #8
0
 def test_ATR_get(self):
     atr = "3B F2 95 12 34 01 36 06"
     a = ATR(toBytes(atr))
     self.assertEqual(a.getTA1(), 0x95)
     self.assertEqual(a.getTB1(), 0x12)
     self.assertEqual(a.getTC1(), 0x34)
     self.assertEqual(a.getTD1(), 0x01)
     self.assertEqual(a.getHistoricalBytes(), [0x36, 0x06])
     self.assertFalse(a.isT15Supported())
     self.assertEqual(str(a), atr)
예제 #9
0
def translate_atr(atr):
	
	atr = ATR(atr)
	print atr
	print 'historical bytes: ', toHexString( atr.getHistoricalBytes() )
	print 'checksum: ', "0x%X" % atr.getChecksum()
	print 'checksum OK: ', atr.checksumOK
	print 'T0 supported: ', atr.isT0Supported()
	print 'T1 supported: ', atr.isT1Supported()
	print 'T15 supported: ', atr.isT15Supported()
예제 #10
0
 def test_ATR_get(self):
     atr = "3B F2 95 12 34 01 36 06"
     a = ATR(toBytes(atr))
     self.assertEqual(a.getTA1(), 0x95)
     self.assertEqual(a.getTB1(), 0x12)
     self.assertEqual(a.getTC1(), 0x34)
     self.assertEqual(a.getTD1(), 0x01)
     self.assertEqual(a.getHistoricalBytes(), [0x36, 0x06])
     self.assertFalse(a.isT15Supported())
     self.assertEqual(str(a), atr)
예제 #11
0
 def testcase_ATR4(self):
     """SIMRock'n Tree"""
     a = ATR([0x3B, 0x77, 0x94, 0x00, 0x00, 0x82, 0x30, 0x00, 0x13,
         0x6C, 0x9F, 0x22])
     historicalbytes = [0x82, 0x30, 0x00, 0x13, 0x6C, 0x9F, 0x22]
     self.assertEqual(a.getHistoricalBytes(), historicalbytes)
     self.assertEqual(a.getChecksum(), None)
     self.assertTrue(a.isT0Supported())
     self.assertTrue(not a.isT1Supported())
     self.assertTrue(not a.isT15Supported())
예제 #12
0
def printATR(bytes):
    if bytes == None or not isinstance(bytes, list) or len(bytes) < 1:
        Executer.printOnShell("The value is not a valid ATR")
        return

    atr = ATR(bytes)

    print atr
    print
    atr.dump()
    print 'T15 supported: ', atr.isT15Supported()
예제 #13
0
def printATR(bytes):
    if bytes == None or not isinstance(bytes,list) or len(bytes) < 1:
        Executer.printOnShell("The value is not a valid ATR")
        return
    
    atr = ATR(bytes)
    
    print atr
    print
    atr.dump()
    print 'T15 supported: ', atr.isT15Supported()
예제 #14
0
def getinfo(connection: CardConnectionDecorator) -> dict:
    atr = ATR(connection.getATR())
    hb = toHexString(atr.getHistoricalBytes())
    cardname = hb[-17:-12]
    name = cardnameMap.get(cardname, "Unknown " + str(cardname))
    return {
        "Name": name,
        "T0": atr.isT0Supported(),
        "T1": atr.isT1Supported(),
        "T15": atr.isT15Supported()
    }
예제 #15
0
 def testcase_ATR1(self):
     """Usimera Classic 2."""
     a = ATR([0x3B, 0x9E, 0x95, 0x80, 0x1F, 0xC3, 0x80, 0x31, 0xA0, 0x73,
         0xBE, 0x21, 0x13, 0x67, 0x29, 0x02, 0x01, 0x01, 0x81, 0xCD, 0xB9])
     historicalbytes = [0x80, 0x31, 0xA0, 0x73, 0xBE, 0x21, 0x13, 0x67,
         0x29, 0x02, 0x01, 0x01, 0x81, 0xCD]
     self.assertEqual(a.getHistoricalBytes(), historicalbytes)
     self.assertEqual(a.getChecksum(), 0xB9)
     self.assertTrue(a.checksumOK)
     self.assertTrue(a.isT0Supported())
     self.assertTrue(not a.isT1Supported())
     self.assertTrue(a.isT15Supported())
예제 #16
0
 def testcase_ATR1(self):
     """Usimera Classic 2."""
     a = ATR([0x3B, 0x9E, 0x95, 0x80, 0x1F, 0xC3, 0x80, 0x31, 0xA0, 0x73,
         0xBE, 0x21, 0x13, 0x67, 0x29, 0x02, 0x01, 0x01, 0x81, 0xCD, 0xB9])
     historicalbytes = [0x80, 0x31, 0xA0, 0x73, 0xBE, 0x21, 0x13, 0x67,
         0x29, 0x02, 0x01, 0x01, 0x81, 0xCD]
     self.assertEquals(a.getHistoricalBytes(), historicalbytes)
     self.assertEquals(a.getChecksum(), 0xB9)
     self.assert_(a.checksumOK)
     self.assert_(a.isT0Supported())
     self.assert_(not a.isT1Supported())
     self.assert_(a.isT15Supported())
예제 #17
0
def printAtr(bytes):
    "convert a string of bytes into a human readable comprehension of the ATR"
    if bytes is None or not isinstance(bytes, list) or len(bytes) < 1:
        printShell("The value is not a valid ATR")
        return

    atr = ATR(bytes)

    # use of this critical section because dump produce some print
    # without control
    with Printer.getInstance():
        printShell(str(atr) + "\n")
        atr.dump()
        printShell('T15 supported: ', atr.isT15Supported())
예제 #18
0
def printAtr(bytes):
    "convert a string of bytes into a human readable comprehension of the ATR"
    if bytes is None or not isinstance(bytes, list) or len(bytes) < 1:
        printShell("The value is not a valid ATR")
        return

    atr = ATR(bytes)

    # use of this critical section because dump produce some print
    # without control
    with Printer.getInstance():
        printShell(str(atr) + "\n")
        atr.dump()
        printShell('T15 supported: ', atr.isT15Supported())
예제 #19
0
def getATR():

    atr = ATR([
        0x3B, 0x9E, 0x95, 0x80, 0x1F, 0xC3, 0x80, 0x31, 0xA0, 0x73, 0xBE, 0x21,
        0x13, 0x67, 0x29, 0x02, 0x01, 0x01, 0x81, 0xCD, 0xB9
    ])

    print(atr)
    print('historical bytes: ', toHexString(atr.getHistoricalBytes()))
    print('checksum: ', "0x%X" % atr.getChecksum())
    print('checksum OK: ', atr.checksumOK)
    print('T0  supported: ', atr.isT0Supported())
    print('T1  supported: ', atr.isT1Supported())
    print('T15 supported: ', atr.isT15Supported())
예제 #20
0
 def testcase_ATR7(self):
     """Protect V3 T=1"""
     a = ATR([0x3B, 0xE5, 0x00, 0x00, 0x81, 0x21, 0x45, 0x9C, 0x10,
         0x01, 0x00, 0x80, 0x0D])
     historicalbytes = [0x9C, 0x10, 0x01, 0x00, 0x80]
     self.assertEqual(a.getHistoricalBytes(), historicalbytes)
     self.assertEqual(a.getChecksum(), 0x0D)
     self.assertTrue(not a.isT0Supported())
     self.assertTrue(a.isT1Supported())
     self.assertTrue(not a.isT15Supported())
     self.assertTrue(a.checksumOK)
     self.assertTrue(a.getTB1() == 0x00)
     self.assertTrue(a.getTC1() == 0x00)
     self.assertTrue(a.getTD1() == 0x81)
     self.assertTrue(a.TD[2 - 1] == 0x21)  # TD2
     self.assertTrue(a.TB[3 - 1] == 0x45)  # TB3
예제 #21
0
 def testcase_ATR7(self):
     """Protect V3 T=1"""
     a = ATR([0x3B, 0xE5, 0x00, 0x00, 0x81, 0x21, 0x45, 0x9C, 0x10,
         0x01, 0x00, 0x80, 0x0D])
     historicalbytes = [0x9C, 0x10, 0x01, 0x00, 0x80]
     self.assertEquals(a.getHistoricalBytes(), historicalbytes)
     self.assertEquals(a.getChecksum(), 0x0D)
     self.assert_(not a.isT0Supported())
     self.assert_(a.isT1Supported())
     self.assert_(not a.isT15Supported())
     self.assert_(a.checksumOK)
     self.assert_(a.getTB1() == 0x00)
     self.assert_(a.getTC1() == 0x00)
     self.assert_(a.getTD1() == 0x81)
     self.assert_(a.TD[2 - 1] == 0x21) # TD2
     self.assert_(a.TB[3 - 1] == 0x45) # TB3
예제 #22
0
파일: nfctool3.py 프로젝트: fr4Cz/nfctool3
def info():
    global connection

    recognized_cards = {
        '00 01': 'MIFARE Classic 1K',
        '00 02': 'MIFARE Classic 4K',
        '00 03': 'MIFARE Ultralight',
        '00 26': 'MIFARE Mini',
        'F0 04': 'Topaz and Jewel',
        'F0 11': 'FeliCa 212K/424K'
    }

    if connection:
        print('[*] Tag Information\n')

        atr = ATR(connection.getATR())
        hb = toHexString(atr.getHistoricalBytes())
        name_key = hb[-17:-12]
        card_name = recognized_cards.get(name_key, 'Unknown')
        print('[+] Card Name:  ', card_name)
        print('[+] T0 Support: ', atr.isT0Supported())
        print('[+] T1 Support: ', atr.isT1Supported())
        print('[+] T15 Support:', atr.isT15Supported())
예제 #23
0
def main():
    global ATRS
    get_smartcards_list()
    cardtype = AnyCardType()
    while True:
        cardrequest = CardRequest(timeout=120, cardType=cardtype)
        cardservice = cardrequest.waitforcard()
        cardservice.connection.connect()
        atrBytes = cardservice.connection.getATR()
        atr = ATR(atrBytes)
        print(atr)
        print('historical bytes: ', toHexString(atr.getHistoricalBytes()))
        print('checksum: ', "0x%X" % atr.getChecksum())
        print('checksum OK: ', atr.checksumOK)
        print('T0  supported: ', atr.isT0Supported())
        print('T1  supported: ', atr.isT1Supported())
        print('T15 supported: ', atr.isT15Supported())
        if (ATRS[toHexString(atrBytes)]):
            print(ATRS[toHexString(atrBytes)])
        print(cardservice.connection)
        send(cardservice.connection)
        sleep(5)
    return 0
예제 #24
0
파일: sample_ATR.py 프로젝트: 12019/pyscard
This file is part of pyscard.

pyscard is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.

pyscard is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License
along with pyscard; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
"""
from smartcard.ATR import ATR
from smartcard.util import toHexString

atr = ATR([0x3B, 0x9E, 0x95, 0x80, 0x1F, 0xC3, 0x80, 0x31, 0xA0, 0x73,
                 0xBE, 0x21, 0x13, 0x67, 0x29, 0x02, 0x01, 0x01, 0x81,
                 0xCD, 0xB9])

print atr
print 'historical bytes: ', toHexString(atr.getHistoricalBytes())
print 'checksum: ', "0x%X" % atr.getChecksum()
print 'checksum OK: ', atr.checksumOK
print 'T0  supported: ', atr.isT0Supported()
print 'T1  supported: ', atr.isT1Supported()
print 'T15 supported: ', atr.isT15Supported()
예제 #25
0
from smartcard.ATR import ATR

card_type = AnyCardType()
card_request = CardRequest(timeout=1, cardType=card_type)
card_service = card_request.waitforcard()

card_service.connection.connect()
atr = ATR(card_service.connection.getATR())
print('------- SMART CARD INFO -------')
print(toHexString(card_service.connection.getATR()))
print('Historical bytes: ', toHexString(atr.getHistoricalBytes()))
print('Checksum: ', "0x%X" % atr.getChecksum())
print('Checksum OK: ', atr.checksumOK)
print('T0 supported: ', atr.isT0Supported())
print('T1 supported: ', atr.isT1Supported())
print('T15 supported: ', atr.isT15Supported())
print('-------------------------------')

GET = [0xFF, 0xCA, 0x00, 0x00, 0x00]
DF_TELECOM = [0xFF, 0xB0, 0x00, 0x04, 0x04]
AUTH_KEY = [0xFF, 0x82, 0x00, 0x00, 0x06, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF]


def trace_command(apdu):
    print('sending ', toHexString(apdu))


def trace_response(response, sw1, sw2):
    if response is None:
        response = []
    print('serial no.: ', toHexString(res), ' status words: ',
예제 #26
0
        hb = toHexString(atr.getHistoricalBytes())
        cardname = hb[-17:-12]
        cardnameMap = {
            "00 01": "MIFARE Classic 1K",
            "00 02": "MIFARE Classic 4K",
            "00 03": "MIFARE Ultralight",
            "00 26": "MIFARE Mini",
            "F0 04": "Topaz and Jewel",
            "F0 11": "FeliCa 212K",
            "F0 11": "FeliCa 424K"
        }
        name = cardnameMap.get(cardname, "unknown")
        print "Card Name: "+ name
        print "T0 supported: ", atr.isT0Supported()
        print "T1 supported: ", atr.isT1Supported()
        print "T15 suppoerted: ", atr.isT15Supported()

    elif COMMAND == "loadkey":
        if (len(sys.argv) < 3):
            print "usage: python nfctool.py loadkey <key>"
            print "ex) python nfctool.py loadkey FFFFFFFFFFFF"
            sys.exit()

        COMMAND = [0xFF, 0x82, 0x00, 0x00, 0x06]
        key = [sys.argv[2][0:2], sys.argv[2][2:4], sys.argv[2][4:6], sys.argv[2][6:8], sys.argv[2][8:10], sys.argv[2][10:12]]
        for i in range(6):
            key[i] = int(key[i], 16)
        COMMAND.extend(key)

        data, sw1, sw2 = connection.transmit(COMMAND)
        print "Status words: %02X %02X" % (sw1, sw2)