from sqdtoolz.Experiment import Experiment
from sqdtoolz.HAL.DDG import *
from sqdtoolz.HAL.ACQ import *
from sqdtoolz.TimingConfiguration import *
new_exp = Experiment(instr_config_file="tests\\BenchTest.yaml",
save_dir="",
name="test")
#Can be done in YAML
# instr_ddg = DDG_DG645('ddg_real')
# new_exp.add_instrument(instr_ddg)
#Ideally, the length and polarity are set to default values in the drivers via the YAML file - i.e. just set TrigPulseDelay
ddg_module = DDG(new_exp._station.load_pulser())
ddg_module.get_trigger_output('AB').TrigPulseLength = 50e-9
ddg_module.get_trigger_output('AB').TrigPolarity = 1
ddg_module.get_trigger_output('AB').TrigPulseDelay = 10e-9
ddg_module.get_trigger_output('CD').TrigPulseLength = 100e-9
ddg_module.get_trigger_output('CD').TrigPulseDelay = 50e-9
ddg_module.get_trigger_output('CD').TrigPolarity = 1
ddg_module.get_trigger_output('EF').TrigPulseLength = 400e-9
ddg_module.get_trigger_output('EF').TrigPulseDelay = 250e-9
ddg_module.get_trigger_output('EF').TrigPolarity = 0
acq_module = ACQ(new_exp._station.load_fpgaACQ())
acq_module.NumSamples = 50
acq_module.NumSegments = 1
# acq_module.SampleRate = 1e9
# acq_module.TriggerEdge = 0
acq_module.set_trigger_source(ddg_module, 'AB')
save_dir="mySaves\\")
#Note the following:
# - Using a 1.25GHz clock source to split and driven into the EXT CLK IN inputs of both Agilent AWGs
# - SYNC CLK OUT on Master goes into SYNC CLK IN on Slave
# - Using M4 on master to trigger the slave AWG via Trigger 4 (could simply do this by just routing the clock lines to both AWGs...)
# - The DDG output triggers the first master AWG
# - Also using an external 10MHz reference on the AWG...
#Sample Clock
freq_module = GENmwSource(new_lab._station.load_SGS100A().get_output('RFOUT'))
freq_module.Output = True
#Ideally, the length and polarity are set to default values in the drivers via the YAML file - i.e. just set TrigPulseDelay
instr_ddg = new_lab._station.load_pulser()
ddg_module = DDG(instr_ddg)
ddg_module.get_trigger_output('AB').TrigPulseLength = 500e-9
ddg_module.get_trigger_output('AB').TrigPolarity = 1
ddg_module.get_trigger_output('AB').TrigPulseDelay = 0e-9
instr_ddg.trigger_rate(100e3)
mod_freq_qubit = WM_SinusoidalIQ("QubitFreqMod", 100e6)
instr_Agi1 = new_lab._station.load_Agi1()
awg_wfm_q = WaveformAWG("Waveform 1", [(instr_Agi1, 'ch1'),
(instr_Agi1, 'ch2')], 1.25e9)
awg_wfm_q.add_waveform_segment(
WFS_Gaussian("init", mod_freq_qubit, 512e-9, 0.5))
awg_wfm_q.add_waveform_segment(WFS_Constant("zero1", None, 512e-9, 0.25))
awg_wfm_q.add_waveform_segment(
WFS_Gaussian("init2", mod_freq_qubit, 512e-9, 0.5))
from sqdtoolz.Experiments.Experimental.ExperimentRabi import ExperimentRabi
import numpy as np
new_lab = Laboratory(instr_config_file="", save_dir="mySaves\\")
#Can be done in YAML
instr_ddg = DummyDDG('ddg')
new_lab.add_instrument(instr_ddg)
instr_acq = DummyACQ('acq')
new_lab.add_instrument(instr_acq)
instr_awg = DummyAWG('awg_test_instr')
new_lab.add_instrument(instr_awg)
instr_fsrc = DummyGENmwSrc('freq_src_instr')
new_lab.add_instrument(instr_fsrc)
ddg_module = DDG('DDG', new_lab, 'ddg')
awg_wfm_q = WaveformAWG("Waveform 2", new_lab, [('awg_test_instr', 'CH3'),
('awg_test_instr', 'CH4')],
1e9)
acq_module = ACQ('ACQ', new_lab, 'acq')
freq_src_module = GENmwSource('MWS', new_lab, 'freq_src_instr', 'CH1')
mod_freq_qubit = WM_SinusoidalIQ("QubitFreqMod", 100e6)
#
#Setup Parameters
#
param_cav_freq = new_lab.add_variable_property('Cavity Frequency',
freq_src_module, 'Frequency')
param_rab_freq = new_lab.add_variable('Rabi Frequency')
from sqdtoolz.Variable import *
from sqdtoolz.Experiments.Experimental.ExperimentCavitySpectroscopy import *
new_lab = Laboratory(instr_config_file="", save_dir="mySaves\\")
#Can be done in YAML
instr_ddg = DummyDDG('ddg')
new_lab.add_instrument(instr_ddg)
instr_acq = DummyACQ('acq')
new_lab.add_instrument(instr_acq)
instr_awg = DummyAWG('awg_test_instr')
new_lab.add_instrument(instr_awg)
instr_fsrc = DummyGENmwSrc('freq_src_instr')
new_lab.add_instrument(instr_fsrc)
ddg_module = DDG(instr_ddg)
awg_wfm_q = WaveformAWG("Waveform 2 CH", [(instr_awg, 'CH3'),
(instr_awg, 'CH4')], 1e9)
acq_module = ACQ(instr_acq)
freq_src_module = GENmwSource(instr_fsrc.get_output('CH1'))
param_cav_freq = new_lab.add_variable_property('Cavity Frequency',
freq_src_module, 'Frequency')
#Setup the trigger and instrument relations
ddg_module.set_trigger_output_params('A', 0.0, 50e-9)
acq_module.set_trigger_source(awg_wfm_q.get_output_channel(0).marker(0))
awg_wfm_q.set_trigger_source_all(ddg_module.get_trigger_output('A'))
acq_module.SampleRate = 1e9
acq_module.NumSamples = 100
#Cement the parameters into the experiment configuration
from sqdtoolz.Drivers.dummyAWG import *
from sqdtoolz.ExperimentConfiguration import *
from sqdtoolz.Variable import *
new_lab = Laboratory(instr_config_file="", save_dir="mySaves\\")
#Can be done in YAML
instr_ddg = DummyDDG('ddg')
new_lab.add_instrument(instr_ddg)
instr_acq = DummyACQ('acq')
new_lab.add_instrument(instr_acq)
instr_awg = DummyAWG('awg_test_instr')
new_lab.add_instrument(instr_awg)
#Ideally, the length and polarity are set to default values in the drivers via the YAML file - i.e. just set TrigPulseDelay
ddg_module = DDG(instr_ddg)
ddg_module.set_trigger_output_params('A', 50e-9)
ddg_module.get_trigger_output('B').TrigPulseLength = 100e-9
ddg_module.get_trigger_output('B').TrigPulseDelay = 50e-9
ddg_module.get_trigger_output('B').TrigPolarity = 1
ddg_module.get_trigger_output('C').TrigPulseLength = 400e-9
ddg_module.get_trigger_output('C').TrigPulseDelay = 250e-9
ddg_module.get_trigger_output('C').TrigPolarity = 0
temp_config = ddg_module._get_current_config()
ddg_module.get_trigger_output('C').TrigPolarity = 1
ddg_module._set_current_config(temp_config, instr_ddg)
acq_module = ACQ(instr_acq)
acq_module.NumSamples = 50
acq_module.SampleRate = 1e9
import numpy as np
import time
new_lab = Laboratory('UnitTests\\UTestExperimentConfiguration.yaml',
'test_save_dir/')
new_lab.load_instrument('virACQ')
new_lab.load_instrument('virDDG')
new_lab.load_instrument('virAWG')
new_lab.load_instrument('virMWS')
#Initialise test-modules
hal_acq = ACQ("dum_acq", new_lab, 'virACQ')
hal_ddg = DDG(
"ddg",
new_lab,
'virDDG',
)
awg_wfm = WaveformAWG("Wfm1", new_lab, [('virAWG', 'CH1'), ('virAWG', 'CH2')],
1e9)
awg_wfm2 = WaveformAWG("Wfm2", new_lab, [('virAWG', 'CH3'), ('virAWG', 'CH4')],
1e9)
hal_mw = GENmwSource("MW-Src", new_lab, 'virMWS', 'CH1')
ExperimentConfiguration('testConf', new_lab, 1.0, ['ddg'], 'dum_acq')
#
VariableInternal('myFreq', new_lab)
VariableInternal('testAmpl', new_lab)
new_lab.group_open("test_group")
for m in range(3, 6):
from sqdtoolz.Experiment import Experiment
from sqdtoolz.HAL.DDG import*
from sqdtoolz.HAL.GENmwSource import*
from sqdtoolz.ExperimentConfiguration import*
from sqdtoolz.Laboratory import*
new_lab = Laboratory(instr_config_file = "tests\\WFSynthHDProV2_Test.yaml", save_dir = "mySaves\\")
#Ideally, the length and polarity are set to default values in the drivers via the YAML file - i.e. just set TrigPulseDelay
ddg_module = DDG(new_lab._station.load_pulser())
ddg_module.get_trigger_output('AB').TrigPulseLength = 500e-9
ddg_module.get_trigger_output('AB').TrigPolarity = 1
ddg_module.get_trigger_output('AB').TrigPulseDelay = 10e-9
new_lab._station.load_pulser().trigger_rate(500e3)
instr_freq = new_lab._station.load_MWS_Windfreak()
freq_module = GENmwSource(instr_freq.get_output('RFoutA'))
freq_module2 = GENmwSource(instr_freq.get_output('RFoutB'))
freq_module.Power = 0
freq_module.Output = True
freq_module.Frequency = 4e9
freq_module.Mode = 'Continuous'
freq_module2.Power = 0
freq_module2.Output = True
freq_module2.Frequency = 7e9
freq_module2.Mode = 'Continuous'
input('press <ENTER> to continue')
#Note the following:
# - Using a 1.25GHz clock source to split and driven into the EXT CLK IN inputs of both Agilent AWGs
# - SYNC CLK OUT on Master goes into SYNC CLK IN on Slave
# - Using M4 on master to trigger the slave AWG via Trigger 4 (could simply do this by just routing the clock lines to both AWGs...)
# - The DDG output triggers the first master AWG
# - Also using an external 10MHz reference on the AWG...
#Sample Clock
new_lab.load_instrument('SGS100A')
freq_module = GENmwSource('MW_sample_clock', new_lab, 'SGS100A', 'RFOUT')
freq_module.Output = True
#Ideally, the length and polarity are set to default values in the drivers via the YAML file - i.e. just set TrigPulseDelay
new_lab.load_instrument('pulser')
ddg_module = DDG('ddg', new_lab, 'pulser')
ddg_module.get_trigger_output('AB').TrigPulseLength = 500e-9
ddg_module.get_trigger_output('AB').TrigPolarity = 1
ddg_module.get_trigger_output('AB').TrigPulseDelay = 0e-9
ddg_module.RepetitionTime = 2.5e-6
mod_freq_qubit = WFMT_ModulationIQ("QubitFreqMod", new_lab, 100e6)
new_lab.load_instrument('Agi1')
awg_wfm_q = WaveformAWG("Waveform 1", new_lab, [('Agi1', 'ch1'),
('Agi1', 'ch2')], 1.25e9)
awg_wfm_q.add_waveform_segment(WFS_Constant("SEQ", None, 512e-9, 0.0))
awg_wfm_q.add_waveform_segment(
WFS_Constant("init", mod_freq_qubit.apply(), 512e-9, 0.5))
awg_wfm_q.add_waveform_segment(WFS_Constant("zero1", None, 512e-9, 0.25))
awg_wfm_q.add_waveform_segment(
save_dir="mySaves\\")
#Note the following:
# - Using a 1.25GHz clock source to split and driven into the EXT CLK IN inputs of both Agilent AWGs
# - SYNC CLK OUT on Master goes into SYNC CLK IN on Slave
# - Using M4 on master to trigger the slave AWG via Trigger 4 (could simply do this by just routing the clock lines to both AWGs...)
# - The DDG output triggers the first master AWG
# - Also using an external 10MHz reference on the AWG...
#Sample Clock
# freq_module = GENmwSource(new_lab._station.load_SGS100A().get_output('RFOUT'))
# freq_module.Output = True
#Ideally, the length and polarity are set to default values in the drivers via the YAML file - i.e. just set TrigPulseDelay
instr_ddg = new_lab.load_instrument('pulser')
DDG("DDG", new_lab, 'pulser')
new_lab.HAL('DDG').get_trigger_output('AB').TrigPulseLength = 750e-9
new_lab.HAL('DDG').get_trigger_output('AB').TrigPolarity = 1
new_lab.HAL('DDG').get_trigger_output('AB').TrigPulseDelay = 0e-9
new_lab.HAL('DDG').RepetitionTime = 1 / 100e3
WFMT_ModulationIQ('QubitFreqMod', new_lab, 100e6)
instr_Agi1 = new_lab.load_instrument('Agi1')
awg_wfm_q = WaveformAWG("Waveform 1", new_lab, [('Agi1', 'ch1'),
('Agi1', 'ch2')], 1.25e9)
read_segs = []
awg_wfm_q.add_waveform_segment(WFS_Constant("SEQPAD", None, 102.4e-9, 0.0))
for m in range(3):
awg_wfm_q.add_waveform_segment(
WFS_Gaussian(f"init{m}",