def res_temp_reset_gridded(inst: Entity):
"""Temporary result - reset gridded state on a surface.
Used for antline routers to undo ItemLightStrip's 4x4 texturing.
This should be removed after geometry is done.
"""
pos = Vec(0, 0, -64)
pos.localise(
Vec.from_str(inst['origin']),
Vec.from_str(inst['angles'])
)
norm = Vec(z=-1).rotate_by_str(inst['angles'])
for axis in 'xyz':
# Don't realign things in the normal's axis -
# those are already fine.
if not norm[axis]:
pos[axis] //= 128
pos[axis] *= 128
pos[axis] += 64
brush = SOLIDS.get(pos.as_tuple(), None)
if brush is None:
return
if brush.color is template_brush.MAT_TYPES.white:
brush.face.mat = const.WhitePan.WHITE_1x1
else:
brush.face.mat = const.BlackPan.BLACK_1
def res_monitor(inst: Entity, res: Property) -> None:
"""Result for the monitor component.
Options:
- bullseye_name: If possible to break this, this is the name to give the npc_bullseye.
- bullseye_loc: This is the position to place the bullseye at.
- bullseye_parent: This is the parent to give the bullseye.
The fixup variable $is_breakable is set to True if lasers or turrets
are present to indicate the func_breakable should be added.
"""
global HAS_MONITOR
import vbsp
(
bullseye_name,
bullseye_loc,
bullseye_parent,
) = res.value
HAS_MONITOR = True
has_laser = vbsp.settings['has_attr']['laser']
# Allow turrets if the monitor is setup to allow it, and the actor should
# be shot.
needs_turret = bullseye_name and options.get(bool,
'voice_studio_should_shoot')
inst.fixup['$is_breakable'] = has_laser or needs_turret
# We need to generate an ai_relationship, which makes turrets hate
# a bullseye.
if needs_turret:
loc = Vec(bullseye_loc)
loc.localise(
Vec.from_str(inst['origin']),
Angle.from_str(inst['angles']),
)
bullseye_name = conditions.local_name(inst, bullseye_name)
inst.map.create_ent(
classname='npc_bullseye',
targetname=bullseye_name,
parentname=conditions.local_name(inst, bullseye_parent),
spawnflags=221186, # Non-solid, invisible, etc..
origin=loc,
)
relation = inst.map.create_ent(
classname='ai_relationship',
targetname='@monitor_turr_hate',
parentname=bullseye_name, # When killed, destroy this too.
spawnflags=2, # Notify turrets about monitor locations
disposition=1, # Hate
origin=loc,
subject='npc_portal_turret_floor',
target=bullseye_name,
)
MONITOR_RELATIONSHIP_ENTS.append(relation)
def shift_ent(inst: Entity) -> None:
"""Randomly shift the instance."""
rng = rand.seed(b'rand_shift', inst, seed)
pos = Vec(
rng.uniform(min_x, max_x),
rng.uniform(min_y, max_y),
rng.uniform(min_z, max_z),
)
pos.localise(Vec.from_str(inst['origin']),
Angle.from_str(inst['angles']))
inst['origin'] = pos
def res_make_funnel_light(inst: Entity):
"""Place a light for Funnel items."""
oran_on = inst.fixup.bool('$start_reversed')
need_blue = need_oran = False
name = ''
if inst.fixup['$connectioncount_polarity'] != '0':
import vbsp
if not vbsp.settings['style_vars']['funnelallowswitchedlights']:
# Allow disabling adding switchable lights.
return
name = conditions.local_name(inst, 'light')
need_blue = need_oran = True
else:
if oran_on:
need_oran = True
else:
need_blue = True
loc = Vec(0, 0, -56)
loc.localise(Vec.from_str(inst['origin']), Vec.from_str(inst['angles']))
if need_blue:
inst.map.create_ent(
classname='light',
targetname=name + '_b' if name else '',
spawnflags=int(oran_on), # 1 = Initially Dark
origin=loc,
_light='50 120 250 50',
_lightHDR='-1 -1 -1 1',
_lightscaleHDR=2,
_fifty_percent_distance=48,
_zero_percent_distance=96,
_hardfalloff=1,
_distance=0,
style=0,
)
if need_oran:
inst.map.create_ent(
classname='light',
targetname=name + '_o' if name else '',
spawnflags=int(not oran_on),
origin=loc,
_light='250 120 50 50',
_lightHDR='-1 -1 -1 1',
_lightscaleHDR=2,
_fifty_percent_distance=48,
_zero_percent_distance=96,
_hardfalloff=1,
_distance=0,
style=0,
)
def res_make_funnel_light(inst: Entity) -> None:
"""Place a light for Funnel items."""
oran_on = inst.fixup.bool('$start_reversed')
need_blue = need_oran = False
name = ''
if inst.fixup['$connectioncount_polarity'] != '0':
import vbsp
if not vbsp.settings['style_vars']['funnelallowswitchedlights']:
# Allow disabling adding switchable lights.
return
name = conditions.local_name(inst, 'light')
need_blue = need_oran = True
else:
if oran_on:
need_oran = True
else:
need_blue = True
loc = Vec(0, 0, -56)
loc.localise(Vec.from_str(inst['origin']), Angle.from_str(inst['angles']))
if need_blue:
inst.map.create_ent(
classname='light',
targetname=name + '_b' if name else '',
spawnflags=int(oran_on), # 1 = Initially Dark
origin=loc,
_light='50 120 250 50',
_lightHDR='-1 -1 -1 1',
_lightscaleHDR=2,
_fifty_percent_distance=48,
_zero_percent_distance=96,
_hardfalloff=1,
_distance=0,
style=0,
)
if need_oran:
inst.map.create_ent(
classname='light',
targetname=name + '_o' if name else '',
spawnflags=int(not oran_on),
origin=loc,
_light='250 120 50 50',
_lightHDR='-1 -1 -1 1',
_lightscaleHDR=2,
_fifty_percent_distance=48,
_zero_percent_distance=96,
_hardfalloff=1,
_distance=0,
style=0,
)
def res_monitor(inst: Entity, res: Property):
"""Result for the monitor component.
"""
global NEEDS_TURRET
import vbsp
(
break_inst,
bullseye_name,
bullseye_loc,
bullseye_parent,
) = res.value
ALL_MONITORS.append(Monitor(inst))
has_laser = vbsp.settings['style_vars'].get('haslaser', False)
# Allow turrets if the monitor is setup to allow it, and the actor should
# be shot.
needs_turret = bullseye_name and vbsp_options.get(
bool, 'voice_studio_should_shoot')
inst.fixup['$is_breakable'] = has_laser or needs_turret
# We need to generate an ai_relationship, which makes turrets hate
# a bullseye.
if needs_turret:
loc = Vec(bullseye_loc)
loc.localise(
Vec.from_str(inst['origin']),
Vec.from_str(inst['angles']),
)
bullseye_name = local_name(inst, bullseye_name)
inst.map.create_ent(
classname='npc_bullseye',
targetname=bullseye_name,
parentname=local_name(inst, bullseye_parent),
spawnflags=221186, # Non-solid, invisible, etc..
origin=loc,
)
inst.map.create_ent(
classname='ai_relationship',
targetname='@monitor_turr_hate',
spawnflags=2, # Notify turrets about monitor locations
disposition=1, # Hate
origin=loc,
subject='npc_portal_turret_floor',
target=bullseye_name,
)
NEEDS_TURRET = True
def res_monitor(inst: Entity, res: Property) -> None:
"""Result for the monitor component.
"""
import vbsp
(
break_inst,
bullseye_name,
bullseye_loc,
bullseye_parent,
) = res.value
ALL_MONITORS.append(Monitor(inst))
has_laser = vbsp.settings['has_attr']['laser']
# Allow turrets if the monitor is setup to allow it, and the actor should
# be shot.
needs_turret = bullseye_name and vbsp_options.get(bool, 'voice_studio_should_shoot')
inst.fixup['$is_breakable'] = has_laser or needs_turret
# We need to generate an ai_relationship, which makes turrets hate
# a bullseye.
if needs_turret:
loc = Vec(bullseye_loc)
loc.localise(
Vec.from_str(inst['origin']),
Vec.from_str(inst['angles']),
)
bullseye_name = local_name(inst, bullseye_name)
inst.map.create_ent(
classname='npc_bullseye',
targetname=bullseye_name,
parentname=local_name(inst, bullseye_parent),
spawnflags=221186, # Non-solid, invisible, etc..
origin=loc,
)
relation = inst.map.create_ent(
classname='ai_relationship',
targetname='@monitor_turr_hate',
spawnflags=2, # Notify turrets about monitor locations
disposition=1, # Hate
origin=loc,
subject='npc_portal_turret_floor',
target=bullseye_name,
)
MONITOR_RELATIONSHIP_ENTS.append(relation)
def mon_remove_bullseyes(inst: Entity) -> Optional[object]:
"""Remove bullsyes used for cameras."""
if not BULLSYE_LOCS:
return RES_EXHAUSTED
if inst['file'].casefold() not in instanceLocs.resolve('<ITEM_CATAPULT_TARGET>'):
return
origin = Vec(0, 0, -64)
origin.localise(Vec.from_str(inst['origin']), Vec.from_str(inst['angles']))
origin = origin.as_tuple()
LOGGER.info('Pos: {} -> ', origin, BULLSYE_LOCS[origin])
if BULLSYE_LOCS[origin]:
BULLSYE_LOCS[origin] -= 1
inst.remove()
def flag_blockpos_type(inst: Entity, flag: Property):
"""Determine the type of a grid position.
If the value is single value, that should be the type.
Otherwise, the value should be a block with 'offset' and 'type' values.
The offset is in block increments, with 0 0 0 equal to the mounting surface.
The type should be a space-seperated list of locations:
* VOID (Outside the map)
* SOLID (Full wall cube)
* EMBED (Hollow wall cube)
* AIR (Inside the map, may be occupied by items)
* OCCUPIED (Known to be occupied by items)
* PIT (Bottomless pits, any)
* PIT_SINGLE (one-high)
* PIT_TOP
* PIT_MID
* PIT_BOTTOM
* GOO
* GOO_SINGLE (one-deep goo)
* GOO_TOP (goo surface)
* GOO_MID
* GOO_BOTTOM (floor)
"""
if flag.has_children():
pos = flag.vec('offset') * 128
types = flag['type'].split()
else:
types = flag.value.split()
pos = Vec()
pos.z -= 128
pos.localise(
Vec.from_str(inst['origin']),
Vec.from_str(inst['angles']),
)
block = brushLoc.POS['world':pos]
for block_type in types:
try:
allowed = brushLoc.BLOCK_LOOKUP[block_type.casefold()]
except KeyError:
raise ValueError(
'"{}" is not a valid block type!'.format(block_type))
if block in allowed:
return True
return False
def resolve_offset(inst, value: str, scale: float=1, zoff: float=0) -> Vec:
"""Retrieve an offset from an instance var. This allows several special values:
* $var to read from a variable
* <piston_start> or <piston> to get the unpowered position of a piston plat
* <piston_end> to get the powered position of a piston plat
* <piston_top> to get the extended position of a piston plat
* <piston_bottom> to get the retracted position of a piston plat
If scale is set, read values are multiplied by this, and zoff is added to Z.
"""
value = value.casefold()
# Offset the overlay by the given distance
# Some special placeholder values:
if value == '<piston_start>' or value == '<piston>':
if inst.fixup.bool(const.FixupVars.PIST_IS_UP):
value = '<piston_top>'
else:
value = '<piston_bottom>'
elif value == '<piston_end>':
if inst.fixup.bool(const.FixupVars.PIST_IS_UP):
value = '<piston_bottom>'
else:
value = '<piston_top>'
if value == '<piston_bottom>':
offset = Vec(
z=inst.fixup.int(const.FixupVars.PIST_BTM) * 128,
)
elif value == '<piston_top>':
offset = Vec(
z=inst.fixup.int(const.FixupVars.PIST_TOP) * 128,
)
else:
# Regular vector
offset = Vec.from_str(resolve_value(inst, value)) * scale
offset.z += zoff
offset.localise(
Vec.from_str(inst['origin']),
Vec.from_str(inst['angles']),
)
return offset
def resolve_offset(inst, value: str, scale: float=1, zoff: float=0) -> Vec:
"""Retrieve an offset from an instance var. This allows several special values:
* Any $replace variables
* <piston_start> or <piston> to get the unpowered position of a piston plat
* <piston_end> to get the powered position of a piston plat
* <piston_top> to get the extended position of a piston plat
* <piston_bottom> to get the retracted position of a piston plat
If scale is set, read values are multiplied by this, and zoff is added to Z.
"""
value = inst.fixup.substitute(value).casefold()
# Offset the overlay by the given distance
# Some special placeholder values:
if value == '<piston_start>' or value == '<piston>':
if inst.fixup.bool(consts.FixupVars.PIST_IS_UP):
value = '<piston_top>'
else:
value = '<piston_bottom>'
elif value == '<piston_end>':
if inst.fixup.bool(consts.FixupVars.PIST_IS_UP):
value = '<piston_bottom>'
else:
value = '<piston_top>'
if value == '<piston_bottom>':
offset = Vec(
z=inst.fixup.int(consts.FixupVars.PIST_BTM) * 128,
)
elif value == '<piston_top>':
offset = Vec(
z=inst.fixup.int(consts.FixupVars.PIST_TOP) * 128,
)
else:
# Regular vector
offset = Vec.from_str(value) * scale
offset.z += zoff
offset.localise(
Vec.from_str(inst['origin']),
Angle.from_str(inst['angles']),
)
return offset
def res_signage(vmf: VMF, inst: Entity, res: Property):
"""Implement the Signage item."""
sign: Optional[Sign]
try:
sign = (CONN_SIGNAGES if res.bool('connection') else
SIGNAGES)[inst.fixup[const.FixupVars.TIM_DELAY]]
except KeyError:
# Blank sign
sign = None
has_arrow = inst.fixup.bool(const.FixupVars.ST_ENABLED)
sign_prim: Optional[Sign]
sign_sec: Optional[Sign]
if has_arrow:
sign_prim = sign
sign_sec = SIGNAGES['arrow']
elif sign is not None:
sign_prim = sign.primary or sign
sign_sec = sign.secondary or None
else:
# Neither sign or arrow, delete this.
inst.remove()
return
origin = Vec.from_str(inst['origin'])
angles = Vec.from_str(inst['angles'])
normal = Vec(z=-1).rotate(*angles)
forward = Vec(x=-1).rotate(*angles)
prim_pos = Vec(0, -16, -64)
sec_pos = Vec(0, 16, -64)
prim_pos.localise(origin, angles)
sec_pos.localise(origin, angles)
template_id = res['template_id', '']
face: Side
if inst.fixup.bool(const.FixupVars.ST_REVERSED):
# Flip around.
forward = -forward
prim_visgroup = 'secondary'
sec_visgroup = 'primary'
prim_pos, sec_pos = sec_pos, prim_pos
else:
prim_visgroup = 'primary'
sec_visgroup = 'secondary'
if template_id:
brush_faces: List[Side] = []
if sign_prim and sign_sec:
visgroup = [prim_visgroup, sec_visgroup]
elif sign_prim:
visgroup = [prim_visgroup]
else:
visgroup = [sec_visgroup]
template = template_brush.import_template(
template_id,
origin,
angles,
force_type=template_brush.TEMP_TYPES.detail,
additional_visgroups=visgroup,
)
for face in template.detail.sides():
if face.normal() == normal:
brush_faces.append(face)
else:
# Direct on the surface.
block_center = origin // 128 * 128 + (64, 64, 64)
try:
face = conditions.SOLIDS[(block_center +
64 * normal).as_tuple()].face
except KeyError:
LOGGER.warning(
"Can't place signage at ({}) in ({}) direction!",
block_center,
normal,
)
return
brush_faces = [face]
if sign_prim is not None:
place_sign(
vmf,
brush_faces,
sign_prim,
prim_pos,
normal,
forward,
rotate=True,
)
if sign_sec is not None:
if has_arrow and res.bool('arrowDown'):
# Arrow texture points down, need to flip it.
forward = -forward
place_sign(
vmf,
brush_faces,
sign_sec,
sec_pos,
normal,
forward,
rotate=not has_arrow,
)
def res_water_splash(vmf: VMF, inst: Entity, res: Property) -> None:
"""Creates splashes when something goes in and out of water.
Arguments:
- `parent`: The name of the parent entity.
- `name`: The name given to the env_splash.
- `scale`: The size of the effect (8 by default).
- `position`: The offset position to place the entity.
- `position2`: The offset to which the entity will move.
- `type`: Use certain fixup values to calculate pos2 instead:
`piston_1`/`2`/`3`/`4`: Use `$bottom_level` and `$top_level` as offsets.
`track_platform`: Use `$travel_direction`, `$travel_distance`, etc.
- `fast_check`: Check faster for movement. Needed for items which
move quickly.
"""
(
name,
parent,
scale,
pos1,
pos2,
calc_type,
fast_check,
) = res.value # type: str, str, float, Vec, Vec, str, str
pos1 = pos1.copy()
splash_pos = pos1.copy()
if calc_type == 'track_platform':
lin_off = srctools.conv_int(inst.fixup['$travel_distance'])
travel_ang = Angle.from_str(inst.fixup['$travel_direction'])
start_pos = srctools.conv_float(inst.fixup['$starting_position'])
if start_pos:
start_pos = round(start_pos * lin_off)
pos1 += Vec(x=-start_pos) @ travel_ang
pos2 = Vec(x=lin_off) @ travel_ang + pos1
elif calc_type.startswith('piston'):
# Use piston-platform offsetting.
# The number is the highest offset to move to.
max_pist = srctools.conv_int(calc_type.split('_', 2)[1], 4)
bottom_pos = srctools.conv_int(inst.fixup['$bottom_level'])
top_pos = min(srctools.conv_int(inst.fixup['$top_level']), max_pist)
pos2 = pos1.copy()
pos1 += Vec(z=128 * bottom_pos)
pos2 += Vec(z=128 * top_pos)
LOGGER.info('Bottom: {}, top: {}', bottom_pos, top_pos)
else:
# Directly from the given value.
pos2 = Vec.from_str(conditions.resolve_value(inst, pos2))
origin = Vec.from_str(inst['origin'])
angles = Angle.from_str(inst['angles'])
splash_pos.localise(origin, angles)
pos1.localise(origin, angles)
pos2.localise(origin, angles)
# Since it's a straight line and you can't go through walls,
# if pos1 and pos2 aren't in goo we aren't ever in goo.
check_pos = [pos1, pos2]
if pos1.z < origin.z:
# If embedding in the floor, the positions can both be below the
# actual surface. In that case check the origin too.
check_pos.append(Vec(pos1.x, pos1.y, origin.z))
if pos1.z == pos2.z:
# Flat - this won't do anything...
return
for pos in check_pos:
grid_pos = pos // 128 * 128
grid_pos += (64, 64, 64)
block = BLOCK_POS['world':pos]
if block.is_goo:
break
else:
return # Not in goo at all
water_pos = grid_pos + (0, 0, 32)
# Check if both positions are above or below the water..
# that means it won't ever trigger.
if max(pos1.z, pos2.z) < water_pos.z - 8:
return
if min(pos1.z, pos2.z) > water_pos.z + 8:
return
# Pass along the water_pos encoded into the targetname.
# Restrict the number of characters to allow direct slicing
# in the script.
enc_data = '_{:09.3f}{}'.format(
water_pos.z + 12,
'f' if fast_check else 's',
)
vmf.create_ent(
classname='env_splash',
targetname=conditions.local_name(inst, name) + enc_data,
parentname=conditions.local_name(inst, parent),
origin=splash_pos + (0, 0, 16),
scale=scale,
vscripts='BEE2/water_splash.nut',
thinkfunction='Think',
spawnflags='1', # Trace downward to water surface.
)
def res_cutout_tile(vmf: srctools.VMF, res: Property):
"""Generate random quarter tiles, like in Destroyed or Retro maps.
- `MarkerItem` is the instance file to look for (`<ITEM_BEE2_CUTOUT_TILE>`)
- `floor_chance`: The percentage change for a segment in the middle of the floor to be a normal tile.
- `floor_glue_chance`: The chance for any tile to be glue - this should be higher than the regular chance, as that overrides this.
- `rotateMax` is the maximum angle to rotate squarebeam models.
- `squarebeamsSkin` sets the skin to use for the squarebeams floor frame.
- `dispBase`, if true makes the floor a displacement with random alpha.
- `Materials` blocks specify the possible materials to use:
- `squarebeams` is the squarebeams variant to use.
- `ceilingwalls` are the sides of the ceiling section.
- `floorbase` is the texture under floor sections.
If `dispBase` is True this is a displacement material.
- `tile_glue` is used on top of a thinner tile segment.
- `clip` is the player_clip texture used over floor segments.
(This allows customising the surfaceprop.)
"""
marker_filenames = instanceLocs.resolve(res['markeritem'])
# TODO: Reimplement cutout tiles.
for inst in vmf.by_class['func_instance']:
if inst['file'].casefold() in marker_filenames:
inst.remove()
return
x: float
y: float
max_x: float
max_y: float
INST_LOCS = {} # Map targetnames -> surface loc
CEIL_IO = [] # Pairs of ceil inst corners to cut out.
FLOOR_IO = [] # Pairs of floor inst corners to cut out.
overlay_ids = {} # When we replace brushes, we need to fix any overlays
# on that surface.
MATS.clear()
floor_edges = [] # Values to pass to add_floor_sides() at the end
sign_locs = set()
# If any signage is present in the map, we need to force tiles to
# appear at that location!
for over in vmf.by_class['info_overlay']:
if (over['material'].casefold() in FORCE_TILE_MATS and
# Only check floor/ceiling overlays
over['basisnormal'] in ('0 0 1', '0 0 -1')):
add_signage_loc(sign_locs, Vec.from_str(over['origin']))
for item in connections.ITEMS.values():
for ind_pan in item.ind_panels:
loc = Vec(0, 0, -64)
loc.localise(
Vec.from_str(ind_pan['origin']),
Vec.from_str(ind_pan['angles']),
)
add_signage_loc(sign_locs, loc)
SETTINGS = {
'floor_chance':
srctools.conv_int(res['floorChance', '100'], 100),
'ceil_chance':
srctools.conv_int(res['ceilingChance', '100'], 100),
'floor_glue_chance':
srctools.conv_int(res['floorGlueChance', '0']),
'ceil_glue_chance':
srctools.conv_int(res['ceilingGlueChance', '0']),
'rotate_beams':
int(srctools.conv_float(res['rotateMax', '0']) * BEAM_ROT_PRECISION),
'beam_skin':
res['squarebeamsSkin', '0'],
'base_is_disp':
srctools.conv_bool(res['dispBase', '0']),
'quad_floor':
res['FloorSize', '4x4'].casefold() == '2x2',
'quad_ceil':
res['CeilingSize', '4x4'].casefold() == '2x2',
}
random.seed(vbsp.MAP_RAND_SEED + '_CUTOUT_TILE_NOISE')
noise = SimplexNoise(period=4 * 40) # 4 tiles/block, 50 blocks max
# We want to know the number of neighbouring tile cutouts before
# placing tiles - blocks away from the sides generate fewer tiles.
# all_floors[z][x,y] = count
floor_neighbours = defaultdict(
dict) # type: Dict[float, Dict[Tuple[float, float], int]]
for mat_prop in res.find_key('Materials', []):
MATS[mat_prop.name].append(mat_prop.value)
if SETTINGS['base_is_disp']:
# We want the normal brushes to become nodraw.
MATS['floorbase_disp'] = MATS['floorbase']
MATS['floorbase'] = ['tools/toolsnodraw']
# Since this uses random data for initialisation, the alpha and
# regular will use slightly different patterns.
alpha_noise = SimplexNoise(period=4 * 50)
else:
alpha_noise = None
for key, default in TEX_DEFAULT:
if key not in MATS:
MATS[key] = [default]
# Find our marker ents
for inst in vmf.by_class['func_instance']:
if inst['file'].casefold() not in marker_filenames:
continue
targ = inst['targetname']
normal = Vec(0, 0, 1).rotate_by_str(inst['angles', '0 0 0'])
# Check the orientation of the marker to figure out what to generate
if normal == (0, 0, 1):
io_list = FLOOR_IO
else:
io_list = CEIL_IO
# Reuse orient to calculate where the solid face will be.
loc = Vec.from_str(inst['origin']) - 64 * normal
INST_LOCS[targ] = loc
item = connections.ITEMS[targ]
item.delete_antlines()
if item.outputs:
for conn in list(item.outputs):
if conn.to_item.inst['file'].casefold() in marker_filenames:
io_list.append((targ, conn.to_item.name))
else:
LOGGER.warning('Cutout tile connected to non-cutout!')
conn.remove() # Delete the connection.
else:
# If the item doesn't have any connections, 'connect'
# it to itself so we'll generate a 128x128 tile segment.
io_list.append((targ, targ))
# Remove all traces of this item (other than in connections lists).
inst.remove()
del connections.ITEMS[targ]
for start_floor, end_floor in FLOOR_IO:
box_min = Vec(INST_LOCS[start_floor])
box_min.min(INST_LOCS[end_floor])
box_max = Vec(INST_LOCS[start_floor])
box_max.max(INST_LOCS[end_floor])
if box_min.z != box_max.z:
continue # They're not in the same level!
z = box_min.z
if SETTINGS['rotate_beams']:
# We have to generate 1 model per 64x64 block to do rotation...
gen_rotated_squarebeams(
vmf,
box_min - (64, 64, 0),
box_max + (64, 64, -8),
skin=SETTINGS['beam_skin'],
max_rot=SETTINGS['rotate_beams'],
)
else:
# Make the squarebeams props, using big models if possible
gen_squarebeams(vmf,
box_min + (-64, -64, 0),
box_max + (64, 64, -8),
skin=SETTINGS['beam_skin'])
# Add a player_clip brush across the whole area
vmf.add_brush(
vmf.make_prism(
p1=box_min - (64, 64, FLOOR_DEPTH),
p2=box_max + (64, 64, 0),
mat=MATS['clip'][0],
).solid)
# Add a noportal_volume covering the surface, in case there's
# room for a portal.
noportal_solid = vmf.make_prism(
# Don't go all the way to the sides, so it doesn't affect wall
# brushes.
p1=box_min - (63, 63, 9),
p2=box_max + (63, 63, 0),
mat='tools/toolsinvisible',
).solid
noportal_ent = vmf.create_ent(
classname='func_noportal_volume',
origin=box_min.join(' '),
)
noportal_ent.solids.append(noportal_solid)
if SETTINGS['base_is_disp']:
# Use displacements for the base instead.
make_alpha_base(
vmf,
box_min + (-64, -64, 0),
box_max + (64, 64, 0),
noise=alpha_noise,
)
for x, y in utils.iter_grid(
min_x=int(box_min.x),
max_x=int(box_max.x) + 1,
min_y=int(box_min.y),
max_y=int(box_max.y) + 1,
stride=128,
):
# Build the set of all positions..
floor_neighbours[z][x, y] = -1
# Mark borders we need to fill in, and the angle (for func_instance)
# The wall is the face pointing inwards towards the bottom brush,
# and the ceil is the ceiling of the block above the bordering grid
# points.
for x in range(int(box_min.x), int(box_max.x) + 1, 128):
# North
floor_edges.append(
BorderPoints(
wall=Vec(x, box_max.y + 64, z - 64),
ceil=Vec_tuple(x, box_max.y + 128, z),
rot=270,
))
# South
floor_edges.append(
BorderPoints(
wall=Vec(x, box_min.y - 64, z - 64),
ceil=Vec_tuple(x, box_min.y - 128, z),
rot=90,
))
for y in range(int(box_min.y), int(box_max.y) + 1, 128):
# East
floor_edges.append(
BorderPoints(
wall=Vec(box_max.x + 64, y, z - 64),
ceil=Vec_tuple(box_max.x + 128, y, z),
rot=180,
))
# West
floor_edges.append(
BorderPoints(
wall=Vec(box_min.x - 64, y, z - 64),
ceil=Vec_tuple(box_min.x - 128, y, z),
rot=0,
))
# Now count boundaries near tiles, then generate them.
# Do it separately for each z-level:
for z, xy_dict in floor_neighbours.items():
for x, y in xy_dict:
# We want to count where there aren't any tiles
xy_dict[x, y] = (((x - 128, y - 128) not in xy_dict) +
((x - 128, y + 128) not in xy_dict) +
((x + 128, y - 128) not in xy_dict) +
((x + 128, y + 128) not in xy_dict) +
((x - 128, y) not in xy_dict) +
((x + 128, y) not in xy_dict) +
((x, y - 128) not in xy_dict) +
((x, y + 128) not in xy_dict))
max_x = max_y = 0
weights = {}
# Now the counts are all correct, compute the weight to apply
# for tiles.
# Adding the neighbouring counts will make a 5x5 area needed to set
# the center to 0.
for (x, y), cur_count in xy_dict.items():
max_x = max(x, max_x)
max_y = max(y, max_y)
# Orthrogonal is worth 0.2, diagonal is worth 0.1.
# Not-present tiles would be 8 - the maximum
tile_count = (0.8 * cur_count + 0.1 * xy_dict.get(
(x - 128, y - 128), 8) + 0.1 * xy_dict.get(
(x - 128, y + 128), 8) + 0.1 * xy_dict.get(
(x + 128, y - 128), 8) + 0.1 * xy_dict.get(
(x + 128, y + 128), 8) + 0.2 * xy_dict.get(
(x - 128, y), 8) + 0.2 * xy_dict.get(
(x, y - 128), 8) + 0.2 * xy_dict.get(
(x, y + 128), 8) + 0.2 * xy_dict.get(
(x + 128, y), 8))
# The number ranges from 0 (all tiles) to 12.8 (no tiles).
# All tiles should still have a small chance to generate tiles.
weights[x, y] = min((tile_count + 0.5) / 8, 1)
# Share the detail entity among same-height tiles..
detail_ent = vmf.create_ent(classname='func_detail', )
for x, y in xy_dict:
convert_floor(
vmf,
Vec(x, y, z),
overlay_ids,
MATS,
SETTINGS,
sign_locs,
detail_ent,
noise_weight=weights[x, y],
noise_func=noise,
)
add_floor_sides(vmf, floor_edges)
return conditions.RES_EXHAUSTED
def res_piston_plat(vmf: VMF, inst: Entity, res: Property) -> None:
"""Generates piston platforms with optimized logic."""
template: template_brush.Template
visgroup_names: List[str]
inst_filenames: Dict[str, str]
has_dn_fizz: bool
automatic_var: str
color_var: str
source_ent: str
snd_start: str
snd_loop: str
snd_stop: str
(
template,
visgroup_names,
inst_filenames,
has_dn_fizz,
automatic_var,
color_var,
source_ent,
snd_start,
snd_loop,
snd_stop,
) = res.value
min_pos = inst.fixup.int(FixupVars.PIST_BTM)
max_pos = inst.fixup.int(FixupVars.PIST_TOP)
start_up = inst.fixup.bool(FixupVars.PIST_IS_UP)
# Allow doing variable lookups here.
visgroup_names = [
conditions.resolve_value(inst, name) for name in visgroup_names
]
if len(ITEMS[inst['targetname']].inputs) == 0:
# No inputs. Check for the 'auto' var if applicable.
if automatic_var and inst.fixup.bool(automatic_var):
pass
# The item is automatically moving, so we generate the dynamics.
else:
# It's static, we just make that and exit.
position = max_pos if start_up else min_pos
inst.fixup[FixupVars.PIST_BTM] = position
inst.fixup[FixupVars.PIST_TOP] = position
static_inst = inst.copy()
vmf.add_ent(static_inst)
static_inst['file'] = inst_filenames['fullstatic_' + str(position)]
return
init_script = 'SPAWN_UP <- {}'.format('true' if start_up else 'false')
if snd_start and snd_stop:
packing.pack_files(vmf, snd_start, snd_stop, file_type='sound')
init_script += '; START_SND <- `{}`; STOP_SND <- `{}`'.format(
snd_start, snd_stop)
elif snd_start:
packing.pack_files(vmf, snd_start, file_type='sound')
init_script += '; START_SND <- `{}`'.format(snd_start)
elif snd_stop:
packing.pack_files(vmf, snd_stop, file_type='sound')
init_script += '; STOP_SND <- `{}`'.format(snd_stop)
script_ent = vmf.create_ent(
classname='info_target',
targetname=local_name(inst, 'script'),
vscripts='BEE2/piston/common.nut',
vscript_init_code=init_script,
origin=inst['origin'],
)
if has_dn_fizz:
script_ent['thinkfunction'] = 'FizzThink'
if start_up:
st_pos, end_pos = max_pos, min_pos
else:
st_pos, end_pos = min_pos, max_pos
script_ent.add_out(
Output('OnUser1', '!self', 'RunScriptCode',
'moveto({})'.format(st_pos)),
Output('OnUser2', '!self', 'RunScriptCode',
'moveto({})'.format(end_pos)),
)
origin = Vec.from_str(inst['origin'])
angles = Vec.from_str(inst['angles'])
off = Vec(z=128).rotate(*angles)
move_ang = off.to_angle()
# Index -> func_movelinear.
pistons = {} # type: Dict[int, Entity]
static_ent = vmf.create_ent('func_brush', origin=origin)
for pist_ind in [1, 2, 3, 4]:
pist_ent = inst.copy()
vmf.add_ent(pist_ent)
if pist_ind <= min_pos:
# It's below the lowest position, so it can be static.
pist_ent['file'] = inst_filenames['static_' + str(pist_ind)]
pist_ent['origin'] = brush_pos = origin + pist_ind * off
temp_targ = static_ent
else:
# It's a moving component.
pist_ent['file'] = inst_filenames['dynamic_' + str(pist_ind)]
if pist_ind > max_pos:
# It's 'after' the highest position, so it never extends.
# So simplify by merging those all.
# That's before this so it'll have to exist.
temp_targ = pistons[max_pos]
if start_up:
pist_ent['origin'] = brush_pos = origin + max_pos * off
else:
pist_ent['origin'] = brush_pos = origin + min_pos * off
pist_ent.fixup['$parent'] = 'pist' + str(max_pos)
else:
# It's actually a moving piston.
if start_up:
brush_pos = origin + pist_ind * off
else:
brush_pos = origin + min_pos * off
pist_ent['origin'] = brush_pos
pist_ent.fixup['$parent'] = 'pist' + str(pist_ind)
pistons[pist_ind] = temp_targ = vmf.create_ent(
'func_movelinear',
targetname=local_name(pist_ent, 'pist' + str(pist_ind)),
origin=brush_pos - off,
movedir=move_ang,
startposition=start_up,
movedistance=128,
speed=150,
)
if pist_ind - 1 in pistons:
pistons[pist_ind]['parentname'] = local_name(
pist_ent,
'pist' + str(pist_ind - 1),
)
if not pist_ent['file']:
# No actual instance, remove.
pist_ent.remove()
temp_result = template_brush.import_template(
template,
brush_pos,
angles,
force_type=template_brush.TEMP_TYPES.world,
add_to_map=False,
additional_visgroups={visgroup_names[pist_ind - 1]},
)
temp_targ.solids.extend(temp_result.world)
template_brush.retexture_template(
temp_result,
origin,
pist_ent.fixup,
generator=GenCat.PANEL,
)
# Associate any set panel with the same entity, if it's present.
tile_pos = Vec(z=-128)
tile_pos.localise(origin, angles)
panel: Optional[Panel] = None
try:
tiledef = TILES[tile_pos.as_tuple(), off.norm().as_tuple()]
except KeyError:
pass
else:
for panel in tiledef.panels:
if panel.same_item(inst):
break
else: # Checked all of them.
panel = None
if panel is not None:
if panel.brush_ent in vmf.entities and not panel.brush_ent.solids:
panel.brush_ent.remove()
panel.brush_ent = pistons[max(pistons.keys())]
panel.offset = st_pos * off
if not static_ent.solids and (panel is None
or panel.brush_ent is not static_ent):
static_ent.remove()
if snd_loop:
script_ent['classname'] = 'ambient_generic'
script_ent['message'] = snd_loop
script_ent['health'] = 10 # Volume
script_ent['pitch'] = '100'
script_ent['spawnflags'] = 16 # Start silent, looped.
script_ent['radius'] = 1024
if source_ent:
# Parent is irrelevant for actual entity locations, but it
# survives for the script to read.
script_ent['SourceEntityName'] = script_ent[
'parentname'] = local_name(inst, source_ent)
def res_signage(vmf: VMF, inst: Entity, res: Property):
"""Implement the Signage item."""
sign: Optional[Sign]
try:
sign = (
CONN_SIGNAGES if
res.bool('connection')
else SIGNAGES
)[inst.fixup[consts.FixupVars.TIM_DELAY]]
except KeyError:
# Blank sign
sign = None
has_arrow = inst.fixup.bool(consts.FixupVars.ST_ENABLED)
sign_prim: Optional[Sign]
sign_sec: Optional[Sign]
if has_arrow:
sign_prim = sign
sign_sec = SIGNAGES['arrow']
elif sign is not None:
sign_prim = sign.primary or sign
sign_sec = sign.secondary or None
else:
# Neither sign or arrow, delete this.
inst.remove()
return
origin = Vec.from_str(inst['origin'])
angles = Vec.from_str(inst['angles'])
normal = Vec(z=-1).rotate(*angles)
forward = Vec(x=-1).rotate(*angles)
prim_pos = Vec(0, -16, -64)
sec_pos = Vec(0, 16, -64)
prim_pos.localise(origin, angles)
sec_pos.localise(origin, angles)
template_id = res['template_id', '']
if inst.fixup.bool(consts.FixupVars.ST_REVERSED):
# Flip around.
forward = -forward
prim_visgroup = 'secondary'
sec_visgroup = 'primary'
prim_pos, sec_pos = sec_pos, prim_pos
else:
prim_visgroup = 'primary'
sec_visgroup = 'secondary'
if sign_prim and sign_sec:
inst['file'] = res['large_clip', '']
inst['origin'] = (prim_pos + sec_pos) / 2
else:
inst['file'] = res['small_clip', '']
inst['origin'] = prim_pos if sign_prim else sec_pos
brush_faces: List[Side] = []
tiledef: Optional[tiling.TileDef] = None
if template_id:
if sign_prim and sign_sec:
visgroup = [prim_visgroup, sec_visgroup]
elif sign_prim:
visgroup = [prim_visgroup]
else:
visgroup = [sec_visgroup]
template = template_brush.import_template(
vmf,
template_id,
origin,
angles,
force_type=template_brush.TEMP_TYPES.detail,
additional_visgroups=visgroup,
)
for face in template.detail.sides():
if face.normal() == normal:
brush_faces.append(face)
else:
# Direct on the surface.
# Find the grid pos first.
grid_pos = (origin // 128) * 128 + 64
try:
tiledef = tiling.TILES[(grid_pos + 128 * normal).as_tuple(), (-normal).as_tuple()]
except KeyError:
LOGGER.warning(
"Can't place signage at ({}) in ({}) direction!",
origin,
normal,
exc_info=True,
)
return
if sign_prim is not None:
over = place_sign(
vmf,
brush_faces,
sign_prim,
prim_pos,
normal,
forward,
rotate=True,
)
if tiledef is not None:
tiledef.bind_overlay(over)
if sign_sec is not None:
if has_arrow and res.bool('arrowDown'):
# Arrow texture points down, need to flip it.
forward = -forward
over = place_sign(
vmf,
brush_faces,
sign_sec,
sec_pos,
normal,
forward,
rotate=not has_arrow,
)
if tiledef is not None:
tiledef.bind_overlay(over)
def res_water_splash(vmf: VMF, inst: Entity, res: Property):
"""Creates splashes when something goes in and out of water.
Arguments:
- parent: The name of the parent entity.
- name: The name given to the env_splash.
- scale: The size of the effect (8 by default).
- position: The offset position to place the entity.
- position2: The offset to which the entity will move.
- type: Use certain fixup values to calculate pos2 instead:
'piston_1/2/3/4': Use $bottom_level and $top_level as offsets.
'track_platform': Use $travel_direction, $travel_distance, etc.
- fast_check: Check faster for movement. Needed for items which
move quickly.
"""
(
name,
parent,
scale,
pos1,
pos2,
calc_type,
fast_check,
) = res.value # type: str, str, float, Vec, str, str
pos1 = pos1.copy() # type: Vec
splash_pos = pos1.copy() # type: Vec
if calc_type == 'track_platform':
lin_off = srctools.conv_int(inst.fixup['$travel_distance'])
travel_ang = inst.fixup['$travel_direction']
start_pos = srctools.conv_float(inst.fixup['$starting_position'])
if start_pos:
start_pos = round(start_pos * lin_off)
pos1 += Vec(x=-start_pos).rotate_by_str(travel_ang)
pos2 = Vec(x=lin_off).rotate_by_str(travel_ang)
pos2 += pos1
elif calc_type.startswith('piston'):
# Use piston-platform offsetting.
# The number is the highest offset to move to.
max_pist = srctools.conv_int(calc_type.split('_', 2)[1], 4)
bottom_pos = srctools.conv_int(inst.fixup['$bottom_level'])
top_pos = min(srctools.conv_int(inst.fixup['$top_level']), max_pist)
pos2 = pos1.copy()
pos1 += Vec(z=128 * bottom_pos)
pos2 += Vec(z=128 * top_pos)
LOGGER.info('Bottom: {}, top: {}', bottom_pos, top_pos)
else:
# Directly from the given value.
pos2 = Vec.from_str(conditions.resolve_value(inst, pos2))
origin = Vec.from_str(inst['origin'])
angles = Vec.from_str(inst['angles'])
splash_pos.localise(origin, angles)
pos1.localise(origin, angles)
pos2.localise(origin, angles)
# Since it's a straight line and you can't go through walls,
# if pos1 and pos2 aren't in goo we aren't ever in goo.
check_pos = [pos1, pos2]
if pos1.z < origin.z:
# If embedding in the floor, the positions can both be below the
# actual surface. In that case check the origin too.
check_pos.append(Vec(pos1.x, pos1.y, origin.z))
for pos in check_pos:
grid_pos = pos // 128 * 128 # type: Vec
grid_pos += (64, 64, 64)
try:
surf = conditions.GOO_LOCS[grid_pos.as_tuple()]
except KeyError:
continue
break
else:
return # Not in goo at all
if pos1.z == pos2.z:
# Flat - this won't do anything...
return
water_pos = surf.get_origin()
# Check if both positions are above or below the water..
# that means it won't ever trigger.
LOGGER.info('pos1: {}, pos2: {}, water_pos: {}', pos1.z, pos2.z, water_pos.z)
if max(pos1.z, pos2.z) < water_pos.z - 8:
return
if min(pos1.z, pos2.z) > water_pos.z + 8:
return
# Pass along the water_pos encoded into the targetname.
# Restrict the number of characters to allow direct slicing
# in the script.
enc_data = '_{:09.3f}{}'.format(
water_pos.z + 12,
'f' if fast_check else 's',
)
vmf.create_ent(
classname='env_splash',
targetname=conditions.local_name(inst, name) + enc_data,
parentname=conditions.local_name(inst, parent),
origin=splash_pos + (0, 0, 16),
scale=scale,
vscripts='BEE2/water_splash.nut',
thinkfunction='Think',
spawnflags='1', # Trace downward to water surface.
)
def read_from_map(self, vmf: VMF, has_attr: Dict[str, bool], items: Dict[str, editoritems.Item]) -> None:
"""Given the map file, set blocks."""
from precomp.instance_traits import get_item_id
from precomp import bottomlessPit
# Starting points to fill air and goo.
# We want to fill goo first...
air_search_locs: List[Tuple[Vec, bool]] = []
goo_search_locs: List[Tuple[Vec, bool]] = []
for ent in vmf.entities:
str_pos = ent['origin', None]
if str_pos is None:
continue
pos = world_to_grid(Vec.from_str(str_pos))
# Exclude entities outside the main area - elevators mainly.
# The border should never be set to air!
if (0, 0, 0) <= pos <= (25, 25, 25):
air_search_locs.append((Vec(pos.x, pos.y, pos.z), False))
# We need to manually set EmbeddedVoxel locations.
# These might not be detected for items where there's a block
# which is entirely empty - corridors and obs rooms for example.
item_id = get_item_id(ent)
if item_id:
try:
item = items[item_id]
except KeyError:
continue
angles = Vec.from_str(ent['angles'])
for local_pos in item.embed_voxels:
world_pos = Vec(local_pos) - (0, 0, 1)
world_pos.localise(pos, angles)
self[world_pos] = Block.EMBED
can_have_pit = bottomlessPit.pits_allowed()
for brush in vmf.brushes[:]:
tex = {face.mat.casefold() for face in brush.sides}
bbox_min, bbox_max = brush.get_bbox()
if (
'nature/toxicslime_a2_bridge_intro' in tex or
'nature/toxicslime_puzzlemaker_cheap' in tex
):
# It's goo!
x = bbox_min.x + 64
y = bbox_min.y + 64
g_x = x // 128
g_y = y // 128
is_pit = can_have_pit and bottomlessPit.is_pit(bbox_min, bbox_max)
# If goo is multi-level, we want to record all pos!
z_pos = range(int(bbox_min.z) + 64, int(bbox_max.z), 128)
top_ind = len(z_pos) - 1
for ind, z in enumerate(z_pos):
g_z = z // 128
self[g_x, g_y, g_z] = Block.from_pitgoo_attr(
is_pit,
is_top=(ind == top_ind),
is_bottom=(ind == 0),
)
# If goo has totally submerged tunnels, they are not filled.
# Add each horizontal neighbour to the search list.
# If not found they'll be ignored.
goo_search_locs += [
(Vec(g_x - 1, g_y, g_z), True),
(Vec(g_x + 1, g_y, g_z), True),
(Vec(g_x, g_y + 1, g_z), True),
(Vec(g_x, g_y - 1, g_z), True),
]
# Remove the brush, since we're not going to use it.
vmf.remove_brush(brush)
# Indicate that this map contains goo/pits
if is_pit:
has_attr[VOICE_ATTR_PIT] = True
else:
has_attr[VOICE_ATTR_GOO] = True
continue
pos = world_to_grid(brush.get_origin(bbox_min, bbox_max))
if bbox_max - bbox_min == (128, 128, 128):
# Full block..
self[pos] = Block.SOLID
else:
# Must be an embbedvoxel block
self[pos] = Block.EMBED
LOGGER.info(
'Analysed map, filling air... ({} starting positions..)',
len(air_search_locs)
)
self.fill_air(goo_search_locs + air_search_locs)
LOGGER.info('Air filled!')
def res_cutout_tile(vmf: srctools.VMF, res: Property):
"""Generate random quarter tiles, like in Destroyed or Retro maps.
- "MarkerItem" is the instance to look for.
- "TileSize" can be "2x2" or "4x4".
- rotateMax is the amount of degrees to rotate squarebeam models.
Materials:
- "squarebeams" is the squarebeams variant to use.
- "ceilingwalls" are the sides of the ceiling section.
- "floorbase" is the texture under floor sections.
- "tile_glue" is used on top of a thinner tile segment.
- "clip" is the player_clip texture used over floor segments.
(This allows customising the surfaceprop.)
- "Floor4x4Black", "Ceil2x2White" and other combinations can be used to
override the textures used.
"""
marker_filenames = instanceLocs.resolve(res['markeritem'])
INST_LOCS = {} # Map targetnames -> surface loc
CEIL_IO = [] # Pairs of ceil inst corners to cut out.
FLOOR_IO = [] # Pairs of floor inst corners to cut out.
overlay_ids = {} # When we replace brushes, we need to fix any overlays
# on that surface.
MATS.clear()
floor_edges = [] # Values to pass to add_floor_sides() at the end
sign_locs = set()
# If any signage is present in the map, we need to force tiles to
# appear at that location!
for over in vmf.by_class['info_overlay']:
if (
over['material'].casefold() in FORCE_TILE_MATS and
# Only check floor/ceiling overlays
over['basisnormal'] in ('0 0 1', '0 0 -1')
):
add_signage_loc(sign_locs, Vec.from_str(over['origin']))
for item in connections.ITEMS.values():
for ind_pan in item.ind_panels:
loc = Vec(0, 0, -64)
loc.localise(
Vec.from_str(ind_pan['origin']),
Vec.from_str(ind_pan['angles']),
)
add_signage_loc(sign_locs, loc)
SETTINGS = {
'floor_chance': srctools.conv_int(
res['floorChance', '100'], 100),
'ceil_chance': srctools.conv_int(
res['ceilingChance', '100'], 100),
'floor_glue_chance': srctools.conv_int(
res['floorGlueChance', '0']),
'ceil_glue_chance': srctools.conv_int(
res['ceilingGlueChance', '0']),
'rotate_beams': int(srctools.conv_float(
res['rotateMax', '0']) * BEAM_ROT_PRECISION),
'beam_skin': res['squarebeamsSkin', '0'],
'base_is_disp': srctools.conv_bool(res['dispBase', '0']),
'quad_floor': res['FloorSize', '4x4'].casefold() == '2x2',
'quad_ceil': res['CeilingSize', '4x4'].casefold() == '2x2',
}
random.seed(vbsp.MAP_RAND_SEED + '_CUTOUT_TILE_NOISE')
noise = SimplexNoise(period=4 * 40) # 4 tiles/block, 50 blocks max
# We want to know the number of neighbouring tile cutouts before
# placing tiles - blocks away from the sides generate fewer tiles.
floor_neighbours = defaultdict(dict) # all_floors[z][x,y] = count
for mat_prop in res.find_key('Materials', []):
MATS[mat_prop.name].append(mat_prop.value)
if SETTINGS['base_is_disp']:
# We want the normal brushes to become nodraw.
MATS['floorbase_disp'] = MATS['floorbase']
MATS['floorbase'] = ['tools/toolsnodraw']
# Since this uses random data for initialisation, the alpha and
# regular will use slightly different patterns.
alpha_noise = SimplexNoise(period=4 * 50)
else:
alpha_noise = None
for key, default in TEX_DEFAULT:
if key not in MATS:
MATS[key] = [default]
# Find our marker ents
for inst in vmf.by_class['func_instance']:
if inst['file'].casefold() not in marker_filenames:
continue
targ = inst['targetname']
normal = Vec(0, 0, 1).rotate_by_str(inst['angles', '0 0 0'])
# Check the orientation of the marker to figure out what to generate
if normal == (0, 0, 1):
io_list = FLOOR_IO
else:
io_list = CEIL_IO
# Reuse orient to calculate where the solid face will be.
loc = Vec.from_str(inst['origin']) - 64 * normal
INST_LOCS[targ] = loc
item = connections.ITEMS[targ]
item.delete_antlines()
if item.outputs:
for conn in list(item.outputs):
if conn.to_item.inst['file'].casefold() in marker_filenames:
io_list.append((targ, conn.to_item.name))
else:
LOGGER.warning('Cutout tile connected to non-cutout!')
conn.remove() # Delete the connection.
else:
# If the item doesn't have any connections, 'connect'
# it to itself so we'll generate a 128x128 tile segment.
io_list.append((targ, targ))
# Remove all traces of this item (other than in connections lists).
inst.remove()
del connections.ITEMS[targ]
for start_floor, end_floor in FLOOR_IO:
box_min = Vec(INST_LOCS[start_floor])
box_min.min(INST_LOCS[end_floor])
box_max = Vec(INST_LOCS[start_floor])
box_max.max(INST_LOCS[end_floor])
if box_min.z != box_max.z:
continue # They're not in the same level!
z = box_min.z
if SETTINGS['rotate_beams']:
# We have to generate 1 model per 64x64 block to do rotation...
gen_rotated_squarebeams(
vmf,
box_min - (64, 64, 0),
box_max + (64, 64, -8),
skin=SETTINGS['beam_skin'],
max_rot=SETTINGS['rotate_beams'],
)
else:
# Make the squarebeams props, using big models if possible
gen_squarebeams(
vmf,
box_min + (-64, -64, 0),
box_max + (64, 64, -8),
skin=SETTINGS['beam_skin']
)
# Add a player_clip brush across the whole area
vmf.add_brush(vmf.make_prism(
p1=box_min - (64, 64, FLOOR_DEPTH),
p2=box_max + (64, 64, 0),
mat=MATS['clip'][0],
).solid)
# Add a noportal_volume covering the surface, in case there's
# room for a portal.
noportal_solid = vmf.make_prism(
# Don't go all the way to the sides, so it doesn't affect wall
# brushes.
p1=box_min - (63, 63, 9),
p2=box_max + (63, 63, 0),
mat='tools/toolsinvisible',
).solid
noportal_ent = vmf.create_ent(
classname='func_noportal_volume',
origin=box_min.join(' '),
)
noportal_ent.solids.append(noportal_solid)
if SETTINGS['base_is_disp']:
# Use displacements for the base instead.
make_alpha_base(
vmf,
box_min + (-64, -64, 0),
box_max + (64, 64, 0),
noise=alpha_noise,
)
for x, y in utils.iter_grid(
min_x=int(box_min.x),
max_x=int(box_max.x) + 1,
min_y=int(box_min.y),
max_y=int(box_max.y) + 1,
stride=128,
):
# Build the set of all positions..
floor_neighbours[z][x, y] = -1
# Mark borders we need to fill in, and the angle (for func_instance)
# The wall is the face pointing inwards towards the bottom brush,
# and the ceil is the ceiling of the block above the bordering grid
# points.
for x in range(int(box_min.x), int(box_max.x) + 1, 128):
# North
floor_edges.append(BorderPoints(
wall=Vec(x, box_max.y + 64, z - 64),
ceil=Vec_tuple(x, box_max.y + 128, z),
rot=270,
))
# South
floor_edges.append(BorderPoints(
wall=Vec(x, box_min.y - 64, z - 64),
ceil=Vec_tuple(x, box_min.y - 128, z),
rot=90,
))
for y in range(int(box_min.y), int(box_max.y) + 1, 128):
# East
floor_edges.append(BorderPoints(
wall=Vec(box_max.x + 64, y, z - 64),
ceil=Vec_tuple(box_max.x + 128, y, z),
rot=180,
))
# West
floor_edges.append(BorderPoints(
wall=Vec(box_min.x - 64, y, z - 64),
ceil=Vec_tuple(box_min.x - 128, y, z),
rot=0,
))
# Now count boundaries near tiles, then generate them.
# Do it separately for each z-level:
for z, xy_dict in floor_neighbours.items(): # type: float, dict
for x, y in xy_dict: # type: float, float
# We want to count where there aren't any tiles
xy_dict[x, y] = (
((x - 128, y - 128) not in xy_dict) +
((x - 128, y + 128) not in xy_dict) +
((x + 128, y - 128) not in xy_dict) +
((x + 128, y + 128) not in xy_dict) +
((x - 128, y) not in xy_dict) +
((x + 128, y) not in xy_dict) +
((x, y - 128) not in xy_dict) +
((x, y + 128) not in xy_dict)
)
max_x = max_y = 0
weights = {}
# Now the counts are all correct, compute the weight to apply
# for tiles.
# Adding the neighbouring counts will make a 5x5 area needed to set
# the center to 0.
for (x, y), cur_count in xy_dict.items():
max_x = max(x, max_x)
max_y = max(y, max_y)
# Orthrogonal is worth 0.2, diagonal is worth 0.1.
# Not-present tiles would be 8 - the maximum
tile_count = (
0.8 * cur_count +
0.1 * xy_dict.get((x - 128, y - 128), 8) +
0.1 * xy_dict.get((x - 128, y + 128), 8) +
0.1 * xy_dict.get((x + 128, y - 128), 8) +
0.1 * xy_dict.get((x + 128, y + 128), 8) +
0.2 * xy_dict.get((x - 128, y), 8) +
0.2 * xy_dict.get((x, y - 128), 8) +
0.2 * xy_dict.get((x, y + 128), 8) +
0.2 * xy_dict.get((x + 128, y), 8)
)
# The number ranges from 0 (all tiles) to 12.8 (no tiles).
# All tiles should still have a small chance to generate tiles.
weights[x, y] = min((tile_count + 0.5) / 8, 1)
# Share the detail entity among same-height tiles..
detail_ent = vmf.create_ent(
classname='func_detail',
)
for x, y in xy_dict:
convert_floor(
vmf,
Vec(x, y, z),
overlay_ids,
MATS,
SETTINGS,
sign_locs,
detail_ent,
noise_weight=weights[x, y],
noise_func=noise,
)
add_floor_sides(vmf, floor_edges)
conditions.reallocate_overlays(overlay_ids)
return conditions.RES_EXHAUSTED
def res_water_splash(inst: Entity, res: Property):
"""Creates splashes when something goes in and out of water.
Arguments:
- parent: The name of the parent entity.
- name: The name given to the env_splash.
- scale: The size of the effect (8 by default).
- position: The offset position to place the entity.
- position2: The offset to which the entity will move.
- type: Use certain fixup values to calculate pos2 instead:
'piston_1/2/3/4': Use $bottom_level and $top_level as offsets.
'track_platform': Use $travel_direction, $travel_distance, etc.
- fast_check: Check faster for movement. Needed for items which
move quickly.
"""
(
name,
parent,
scale,
pos1,
pos2,
calc_type,
fast_check,
) = res.value # type: str, str, float, Vec, str, str
pos1 = pos1.copy() # type: Vec
splash_pos = pos1.copy() # type: Vec
if calc_type == 'track_platform':
lin_off = srctools.conv_int(inst.fixup['$travel_distance'])
travel_ang = inst.fixup['$travel_direction']
start_pos = srctools.conv_float(inst.fixup['$starting_position'])
if start_pos:
start_pos = round(start_pos * lin_off)
pos1 += Vec(x=-start_pos).rotate_by_str(travel_ang)
pos2 = Vec(x=lin_off).rotate_by_str(travel_ang)
pos2 += pos1
elif calc_type.startswith('piston'):
# Use piston-platform offsetting.
# The number is the highest offset to move to.
max_pist = srctools.conv_int(calc_type.split('_', 2)[1], 4)
bottom_pos = srctools.conv_int(inst.fixup['$bottom_level'])
top_pos = min(srctools.conv_int(inst.fixup['$top_level']), max_pist)
pos2 = pos1.copy()
pos1 += Vec(z=128 * bottom_pos)
pos2 += Vec(z=128 * top_pos)
LOGGER.info('Bottom: {}, top: {}', bottom_pos, top_pos)
else:
# Directly from the given value.
pos2 = Vec.from_str(conditions.resolve_value(inst, pos2))
origin = Vec.from_str(inst['origin'])
angles = Vec.from_str(inst['angles'])
splash_pos.localise(origin, angles)
pos1.localise(origin, angles)
pos2.localise(origin, angles)
conditions.VMF.create_ent(
classname='env_beam',
targetname=conditions.local_name(inst, name + '_pos'),
origin=str(pos1),
targetpoint=str(pos2),
)
# Since it's a straight line and you can't go through walls,
# if pos1 and pos2 aren't in goo we aren't ever in goo.
check_pos = [pos1, pos2]
if pos1.z < origin.z:
# If embedding in the floor, the positions can both be below the
# actual surface. In that case check the origin too.
check_pos.append(Vec(pos1.x, pos1.y, origin.z))
for pos in check_pos:
grid_pos = pos // 128 * 128 # type: Vec
grid_pos += (64, 64, 64)
try:
surf = conditions.GOO_LOCS[grid_pos.as_tuple()]
except KeyError:
continue
break
else:
return # Not in goo at all
if pos1.z == pos2.z:
# Flat - this won't do anything...
return
water_pos = surf.get_origin()
# Check if both positions are above or below the water..
# that means it won't ever trigger.
LOGGER.info('pos1: {}, pos2: {}, water_pos: {}', pos1.z, pos2.z,
water_pos.z)
if max(pos1.z, pos2.z) < water_pos.z - 8:
return
if min(pos1.z, pos2.z) > water_pos.z + 8:
return
import vbsp
# Pass along the water_pos encoded into the targetname.
# Restrict the number of characters to allow direct slicing
# in the script.
enc_data = '_{:09.3f}{}'.format(
water_pos.z + 12,
'f' if fast_check else 's',
)
conditions.VMF.create_ent(
classname='env_splash',
targetname=conditions.local_name(inst, name) + enc_data,
parentname=conditions.local_name(inst, parent),
origin=splash_pos + (0, 0, 16),
scale=scale,
vscripts='BEE2/water_splash.nut',
thinkfunction='Think',
spawnflags='1', # Trace downward to water surface.
)
vbsp.PACK_FILES.add('scripts/vscripts/BEE2/water_splash.nut')
