예제 #1
0
    def cb_enumerate(self, uid, connected_uid, position, hardware_version,
                     firmware_version, device_identifier, enumeration_type):
        if enumeration_type == IPConnection.ENUMERATION_TYPE_CONNECTED or \
           enumeration_type == IPConnection.ENUMERATION_TYPE_AVAILABLE:
            if device_identifier == LCD20x4.DEVICE_IDENTIFIER:
                try:
                    self.lcd = LCD20x4(uid, self.ipcon)
                    self.lcd.clear_display()
                    self.lcd.backlight_on()
                    self.lcd.register_callback(self.lcd.CALLBACK_BUTTON_PRESSED, self.cb_button_pressed)
                    self.configure_custom_chars()

                except Error as e:
                    self.error_msg.showMessage('LCD 20x4 init failed: ' + str(e.description))
                    self.lcd = None
            elif device_identifier == AmbientLight.DEVICE_IDENTIFIER:
                try:
                    self.al = AmbientLight(uid, self.ipcon)
                    self.al.set_illuminance_callback_period(1000)
                    self.al.register_callback(self.al.CALLBACK_ILLUMINANCE,
                                              self.cb_illuminance)
                except Error as e:
                    self.error_msg.showMessage('Ambient Light init failed: ' + str(e.description))
                    self.al = None
            elif device_identifier == AmbientLightV2.DEVICE_IDENTIFIER:
                try:
                    self.al_v2 = AmbientLightV2(uid, self.ipcon)
                    self.al_v2.set_configuration(AmbientLightV2.ILLUMINANCE_RANGE_64000LUX,
                                                 AmbientLightV2.INTEGRATION_TIME_200MS)
                    self.al_v2.set_illuminance_callback_period(1000)
                    self.al_v2.register_callback(self.al_v2.CALLBACK_ILLUMINANCE,
                                                 self.cb_illuminance_v2)
                except Error as e:
                    self.error_msg.showMessage('Ambient Light 2.0 init failed: ' + str(e.description))
                    self.al = None
            elif device_identifier == Humidity.DEVICE_IDENTIFIER:
                try:
                    self.hum = Humidity(uid, self.ipcon)
                    self.hum.set_humidity_callback_period(1000)
                    self.hum.register_callback(self.hum.CALLBACK_HUMIDITY,
                                               self.cb_humidity)
                except Error as e:
                    self.error_msg.showMessage('Humidity init failed: ' + str(e.description))
                    self.hum = None
            elif device_identifier == Barometer.DEVICE_IDENTIFIER:
                try:
                    self.baro = Barometer(uid, self.ipcon)
                    self.baro.set_air_pressure_callback_period(1000)
                    self.baro.register_callback(self.baro.CALLBACK_AIR_PRESSURE,
                                                self.cb_air_pressure)
                except Error as e:
                    self.error_msg.showMessage('Barometer init failed: ' + str(e.description))
                    self.baro = None
예제 #2
0
class WeatherStation(QApplication):
    HOST = "localhost"
    PORT = 4223

    ipcon = None
    lcd = None
    al = None
    al_v2 = None
    hum = None
    baro = None

    projects = []
    active_project = None

    error_msg = None

    def __init__(self, args):
        super(QApplication, self).__init__(args)

        self.error_msg = QErrorMessage()
        self.ipcon = IPConnection()

        signal.signal(signal.SIGINT, self.exit_demo)
        signal.signal(signal.SIGTERM, self.exit_demo)

        timer = QTimer(self)
        timer.setSingleShot(True)
        timer.timeout.connect(self.connect)
        timer.start(1)

        self.lcd_timer = QTimer(self)
        self.lcd_timer.timeout.connect(self.mute_lcd)
        self.lcd_timer.start(10000)

    def exit_demo(self, signl=None, frme=None):
        try:
            self.ipcon.disconnect()
            self.timer.stop()
            self.tabs.destroy()
        except:
            pass

        sys.exit()

    def open_gui(self):
        self.main = MainWindow(self)
        self.main.setFixedSize(930, 530)
        self.main.setWindowIcon(
            QIcon(load_pixmap('starter_kit_weather_station_demo-icon.png')))

        self.tabs = QTabWidget()

        widget = QWidget()
        layout = QVBoxLayout()
        layout.addWidget(self.tabs)
        widget.setLayout(layout)

        self.main.setCentralWidget(widget)

        self.projects.append(ProjectEnvDisplay(self.tabs, self))
        self.projects.append(ProjectStatistics(self.tabs, self))
        self.projects.append(ProjectXively(self.tabs, self))

        self.tabs.addTab(self.projects[0], "Display Environment Measurements")
        self.tabs.addTab(self.projects[1],
                         "Show Statistics with Button Control")
        self.tabs.addTab(self.projects[2], "Connect to Xively")

        self.active_project = self.projects[0]

        self.tabs.currentChanged.connect(self.tabChangedSlot)
        self.tabs.setCurrentIndex(1)

        self.main.setWindowTitle("Starter Kit: Weather Station Demo " +
                                 DEMO_VERSION)
        self.main.show()

    def connect(self):
        try:
            self.ipcon.connect(WeatherStation.HOST, WeatherStation.PORT)
        except Error as e:
            self.error_msg.showMessage('Connection Error: ' +
                                       str(e.description) +
                                       "\nBrickd installed and running?")
            return
        except socket.error as e:
            self.error_msg.showMessage('Socket error: ' + str(e) +
                                       "\nBrickd installed and running?")
            return

        self.ipcon.register_callback(IPConnection.CALLBACK_ENUMERATE,
                                     self.cb_enumerate)
        self.ipcon.register_callback(IPConnection.CALLBACK_CONNECTED,
                                     self.cb_connected)

        try:
            self.ipcon.enumerate()
        except Error as e:
            self.error_msg.showMessage('Enumerate Error: ' +
                                       str(e.description))
            return

        self.open_gui()

    def tabChangedSlot(self, tabIndex):

        if self.lcd is not None:
            self.lcd.clear_display()

        self.active_project = self.projects[tabIndex]

    def cb_illuminance(self, illuminance):
        for p in self.projects:
            p.update_illuminance(illuminance / 10.0)

    def cb_illuminance_v2(self, illuminance):
        for p in self.projects:
            p.update_illuminance(illuminance / 100.0)

    def cb_humidity(self, humidity):
        for p in self.projects:
            p.update_humidity(humidity / 10.0)

    def cb_air_pressure(self, air_pressure):
        for p in self.projects:
            p.update_air_pressure(air_pressure / 1000.0)

        try:
            temperature = self.baro.get_chip_temperature()
        except Error as e:
            print('Could not get temperature: ' + str(e.description))
            return

        for p in self.projects:
            p.update_temperature(temperature / 100.0)

    def configure_custom_chars(self):
        c = [[0x00 for x in range(8)] for y in range(8)]

        c[0] = [0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff]
        c[1] = [0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff]
        c[2] = [0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff]
        c[3] = [0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff]
        c[4] = [0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff]
        c[5] = [0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff]
        c[6] = [0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff]
        c[7] = [0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff]

        for i in range(len(c)):
            self.lcd.set_custom_character(i, c[i])

    def cb_button_pressed(self, button):
        if self.lcd.is_backlight_on():
            for p in self.projects:
                p.button_pressed(button)
        else:
            self.lcd.backlight_on()
            self.lcd_timer.start()

    def mute_lcd(self):
        self.lcd.backlight_off()

    def cb_enumerate(self, uid, connected_uid, position, hardware_version,
                     firmware_version, device_identifier, enumeration_type):
        if enumeration_type == IPConnection.ENUMERATION_TYPE_CONNECTED or \
           enumeration_type == IPConnection.ENUMERATION_TYPE_AVAILABLE:
            if device_identifier == LCD20x4.DEVICE_IDENTIFIER:
                try:
                    self.lcd = LCD20x4(uid, self.ipcon)
                    self.lcd.clear_display()
                    self.lcd.backlight_on()
                    self.lcd.register_callback(
                        self.lcd.CALLBACK_BUTTON_PRESSED,
                        self.cb_button_pressed)
                    self.configure_custom_chars()
                except Error as e:
                    self.error_msg.showMessage('LCD 20x4 init failed: ' +
                                               str(e.description))
                    self.lcd = None
            elif device_identifier == AmbientLight.DEVICE_IDENTIFIER:
                try:
                    self.al = AmbientLight(uid, self.ipcon)
                    self.al.set_illuminance_callback_period(1000)
                    self.al.register_callback(self.al.CALLBACK_ILLUMINANCE,
                                              self.cb_illuminance)
                except Error as e:
                    self.error_msg.showMessage('Ambient Light init failed: ' +
                                               str(e.description))
                    self.al = None
            elif device_identifier == AmbientLightV2.DEVICE_IDENTIFIER:
                try:
                    self.al_v2 = AmbientLightV2(uid, self.ipcon)
                    self.al_v2.set_configuration(
                        AmbientLightV2.ILLUMINANCE_RANGE_64000LUX,
                        AmbientLightV2.INTEGRATION_TIME_200MS)
                    self.al_v2.set_illuminance_callback_period(1000)
                    self.al_v2.register_callback(
                        self.al_v2.CALLBACK_ILLUMINANCE,
                        self.cb_illuminance_v2)
                except Error as e:
                    self.error_msg.showMessage(
                        'Ambient Light 2.0 init failed: ' + str(e.description))
                    self.al = None
            elif device_identifier == Humidity.DEVICE_IDENTIFIER:
                try:
                    self.hum = Humidity(uid, self.ipcon)
                    self.hum.set_humidity_callback_period(1000)
                    self.hum.register_callback(self.hum.CALLBACK_HUMIDITY,
                                               self.cb_humidity)
                except Error as e:
                    self.error_msg.showMessage('Humidity init failed: ' +
                                               str(e.description))
                    self.hum = None
            elif device_identifier == Barometer.DEVICE_IDENTIFIER:
                try:
                    self.baro = Barometer(uid, self.ipcon)
                    self.baro.set_air_pressure_callback_period(1000)
                    self.baro.register_callback(
                        self.baro.CALLBACK_AIR_PRESSURE, self.cb_air_pressure)
                except Error as e:
                    self.error_msg.showMessage('Barometer init failed: ' +
                                               str(e.description))
                    self.baro = None

    def cb_connected(self, connected_reason):
        if connected_reason == IPConnection.CONNECT_REASON_AUTO_RECONNECT:

            while True:
                try:
                    self.ipcon.enumerate()
                    break
                except Error as e:
                    self.error_msg.showMessage('Enumerate Error: ' +
                                               str(e.description))
                    time.sleep(1)
예제 #3
0
 def cb_enumerate(self, uid, connected_uid, position, hardware_version,
                  firmware_version, device_identifier, enumeration_type):
     if enumeration_type == IPConnection.ENUMERATION_TYPE_CONNECTED or \
        enumeration_type == IPConnection.ENUMERATION_TYPE_AVAILABLE:
         if device_identifier == LCD20x4.DEVICE_IDENTIFIER:
             try:
                 self.lcd = LCD20x4(uid, self.ipcon)
                 self.lcd.clear_display()
                 self.lcd.backlight_on()
                 self.lcd.register_callback(
                     self.lcd.CALLBACK_BUTTON_PRESSED,
                     self.cb_button_pressed)
                 self.configure_custom_chars()
             except Error as e:
                 self.error_msg.showMessage('LCD 20x4 init failed: ' +
                                            str(e.description))
                 self.lcd = None
         elif device_identifier == AmbientLight.DEVICE_IDENTIFIER:
             try:
                 self.al = AmbientLight(uid, self.ipcon)
                 self.al.set_illuminance_callback_period(1000)
                 self.al.register_callback(self.al.CALLBACK_ILLUMINANCE,
                                           self.cb_illuminance)
             except Error as e:
                 self.error_msg.showMessage('Ambient Light init failed: ' +
                                            str(e.description))
                 self.al = None
         elif device_identifier == AmbientLightV2.DEVICE_IDENTIFIER:
             try:
                 self.al_v2 = AmbientLightV2(uid, self.ipcon)
                 self.al_v2.set_configuration(
                     AmbientLightV2.ILLUMINANCE_RANGE_64000LUX,
                     AmbientLightV2.INTEGRATION_TIME_200MS)
                 self.al_v2.set_illuminance_callback_period(1000)
                 self.al_v2.register_callback(
                     self.al_v2.CALLBACK_ILLUMINANCE,
                     self.cb_illuminance_v2)
             except Error as e:
                 self.error_msg.showMessage(
                     'Ambient Light 2.0 init failed: ' + str(e.description))
                 self.al = None
         elif device_identifier == Humidity.DEVICE_IDENTIFIER:
             try:
                 self.hum = Humidity(uid, self.ipcon)
                 self.hum.set_humidity_callback_period(1000)
                 self.hum.register_callback(self.hum.CALLBACK_HUMIDITY,
                                            self.cb_humidity)
             except Error as e:
                 self.error_msg.showMessage('Humidity init failed: ' +
                                            str(e.description))
                 self.hum = None
         elif device_identifier == Barometer.DEVICE_IDENTIFIER:
             try:
                 self.baro = Barometer(uid, self.ipcon)
                 self.baro.set_air_pressure_callback_period(1000)
                 self.baro.register_callback(
                     self.baro.CALLBACK_AIR_PRESSURE, self.cb_air_pressure)
             except Error as e:
                 self.error_msg.showMessage('Barometer init failed: ' +
                                            str(e.description))
                 self.baro = None
예제 #4
0
class WeatherStation(QApplication):
    HOST = "localhost"
    PORT = 4223

    ipcon = None
    lcd = None
    al = None
    al_v2 = None
    hum = None
    baro = None

    projects = []
    active_project = None

    error_msg = None

    def __init__(self, args):
        super(QApplication, self).__init__(args)

        self.error_msg = QErrorMessage()
        self.ipcon = IPConnection()

        signal.signal(signal.SIGINT, self.exit_demo)
        signal.signal(signal.SIGTERM, self.exit_demo)

        timer = QTimer(self)
        timer.setSingleShot(True)
        timer.timeout.connect(self.connect)
        timer.start(1)

        self.lcd_timer = QTimer(self)
        self.lcd_timer.timeout.connect(self.mute_lcd)
        self.lcd_timer.start(10000)


    def exit_demo(self, signl=None, frme=None):
        try:
            self.ipcon.disconnect()
            self.timer.stop()
            self.tabs.destroy()
        except:
            pass

        sys.exit()

    def open_gui(self):
        self.main = MainWindow(self)
        self.main.setFixedSize(930, 530)
        self.main.setWindowIcon(QIcon(load_pixmap('starter_kit_weather_station_demo-icon.png')))
        
        self.tabs = QTabWidget()
        
        widget = QWidget()
        layout = QVBoxLayout()
        layout.addWidget(self.tabs)
        widget.setLayout(layout)

        self.main.setCentralWidget(widget)
        
        self.projects.append(ProjectEnvDisplay(self.tabs, self))
        self.projects.append(ProjectStatistics(self.tabs, self))
        self.projects.append(ProjectXively(self.tabs, self))

        self.tabs.addTab(self.projects[0], "Display Environment Measurements")
        self.tabs.addTab(self.projects[1], "Show Statistics with Button Control")
        self.tabs.addTab(self.projects[2], "Connect to Xively")

        self.active_project = self.projects[0]

        self.tabs.currentChanged.connect(self.tabChangedSlot)
        self.tabs.setCurrentIndex(1)

        self.main.setWindowTitle("Starter Kit: Weather Station Demo " + DEMO_VERSION)
        self.main.show()

    def connect(self):
        try:
            self.ipcon.connect(WeatherStation.HOST, WeatherStation.PORT)
        except Error as e:
            self.error_msg.showMessage('Connection Error: ' + str(e.description) + "\nBrickd installed and running?")
            return
        except socket.error as e:
            self.error_msg.showMessage('Socket error: ' + str(e) + "\nBrickd installed and running?")
            return

        self.ipcon.register_callback(IPConnection.CALLBACK_ENUMERATE,
                                     self.cb_enumerate)
        self.ipcon.register_callback(IPConnection.CALLBACK_CONNECTED,
                                     self.cb_connected)

        try:
            self.ipcon.enumerate()
        except Error as e:
            self.error_msg.showMessage('Enumerate Error: ' + str(e.description))
            return

        self.open_gui()

    def tabChangedSlot(self, tabIndex):

        if self.lcd is not None:
            self.lcd.clear_display()

        self.active_project = self.projects[tabIndex]

    def cb_illuminance(self, illuminance):
        for p in self.projects:
            p.update_illuminance(illuminance/10.0)

    def cb_illuminance_v2(self, illuminance):
        for p in self.projects:
            p.update_illuminance(illuminance/100.0)

    def cb_humidity(self, humidity):
        for p in self.projects:
            p.update_humidity(humidity/10.0)

    def cb_air_pressure(self, air_pressure):
        for p in self.projects:
            p.update_air_pressure(air_pressure/1000.0)

        try:
            temperature = self.baro.get_chip_temperature()
        except Error as e:
            print('Could not get temperature: ' + str(e.description))
            return

        for p in self.projects:
            p.update_temperature(temperature/100.0)

    def configure_custom_chars(self):
        c = [[0x00 for x in range(8)] for y in range(8)]

        c[0] = [0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff]
        c[1] = [0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff]
        c[2] = [0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff]
        c[3] = [0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff]
        c[4] = [0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff]
        c[5] = [0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff]
        c[6] = [0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff]
        c[7] = [0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff]

        for i in range(len(c)):
            self.lcd.set_custom_character(i, c[i]);

    def cb_button_pressed(self, button):
        if self.lcd.is_backlight_on(): 
            for p in self.projects:
                p.button_pressed(button)
        else:
            self.lcd.backlight_on()
            self.lcd_timer.start()

    def mute_lcd(self):
        self.lcd.backlight_off()

    def cb_enumerate(self, uid, connected_uid, position, hardware_version,
                     firmware_version, device_identifier, enumeration_type):
        if enumeration_type == IPConnection.ENUMERATION_TYPE_CONNECTED or \
           enumeration_type == IPConnection.ENUMERATION_TYPE_AVAILABLE:
            if device_identifier == LCD20x4.DEVICE_IDENTIFIER:
                try:
                    self.lcd = LCD20x4(uid, self.ipcon)
                    self.lcd.clear_display()
                    self.lcd.backlight_on()
                    self.lcd.register_callback(self.lcd.CALLBACK_BUTTON_PRESSED, self.cb_button_pressed)
                    self.configure_custom_chars()
                except Error as e:
                    self.error_msg.showMessage('LCD 20x4 init failed: ' + str(e.description))
                    self.lcd = None
            elif device_identifier == AmbientLight.DEVICE_IDENTIFIER:
                try:
                    self.al = AmbientLight(uid, self.ipcon)
                    self.al.set_illuminance_callback_period(1000)
                    self.al.register_callback(self.al.CALLBACK_ILLUMINANCE,
                                              self.cb_illuminance)
                except Error as e:
                    self.error_msg.showMessage('Ambient Light init failed: ' + str(e.description))
                    self.al = None
            elif device_identifier == AmbientLightV2.DEVICE_IDENTIFIER:
                try:
                    self.al_v2 = AmbientLightV2(uid, self.ipcon)
                    self.al_v2.set_configuration(AmbientLightV2.ILLUMINANCE_RANGE_64000LUX,
                                                 AmbientLightV2.INTEGRATION_TIME_200MS)
                    self.al_v2.set_illuminance_callback_period(1000)
                    self.al_v2.register_callback(self.al_v2.CALLBACK_ILLUMINANCE,
                                                 self.cb_illuminance_v2)
                except Error as e:
                    self.error_msg.showMessage('Ambient Light 2.0 init failed: ' + str(e.description))
                    self.al = None
            elif device_identifier == Humidity.DEVICE_IDENTIFIER:
                try:
                    self.hum = Humidity(uid, self.ipcon)
                    self.hum.set_humidity_callback_period(1000)
                    self.hum.register_callback(self.hum.CALLBACK_HUMIDITY,
                                               self.cb_humidity)
                except Error as e:
                    self.error_msg.showMessage('Humidity init failed: ' + str(e.description))
                    self.hum = None
            elif device_identifier == Barometer.DEVICE_IDENTIFIER:
                try:
                    self.baro = Barometer(uid, self.ipcon)
                    self.baro.set_air_pressure_callback_period(1000)
                    self.baro.register_callback(self.baro.CALLBACK_AIR_PRESSURE,
                                                self.cb_air_pressure)
                except Error as e:
                    self.error_msg.showMessage('Barometer init failed: ' + str(e.description))
                    self.baro = None

    def cb_connected(self, connected_reason):
        if connected_reason == IPConnection.CONNECT_REASON_AUTO_RECONNECT:

            while True:
                try:
                    self.ipcon.enumerate()
                    break
                except Error as e:
                    self.error_msg.showMessage('Enumerate Error: ' + str(e.description))
                    time.sleep(1)