def run_all(config_file, pkgName, git, patch, skip_setup, read_cache, project,
suite_dir, test_cases, base_dir, output_dir, verbose, debug):
"""
Main process of DTS, it will run all test suites in the config file.
"""
global config
global serializer
global nic
global requested_tests
global result
global excel_report
global stats
global log_handler
global debug_mode
# prepare the output folder
if not os.path.exists(output_dir):
os.mkdir(output_dir)
# add python module search path
for folder in FOLDERS.values():
sys.path.append(folder)
sys.path.append(suite_dir)
# enable debug mode
if debug is True:
debug_mode = True
# init log_handler handler
if verbose is True:
logger.set_verbose()
logger.log_dir = output_dir
log_handler = getLogger('dts')
log_handler.config_execution('dts')
# run designated test case
requested_tests = test_cases
# Read config file
config = ConfigParser.SafeConfigParser()
config.read(config_file)
# register exit action
atexit.register(close_crb_sessions)
os.environ["TERM"] = "dumb"
serializer = Serializer()
# excel report and statistics file
result = Result()
rst.path2Result = output_dir
excel_report = ExcelReporter(output_dir + '/test_results.xls')
stats = StatsReporter(output_dir + '/statistics.txt')
# for all Exectuion sections
for section in config.sections():
dts_parse_param(section)
# verify if the delimiter is good if the lists are vertical
dutIP, targets, test_suites, nics = dts_parse_config(section)
log_handler.info("\nDUT " + dutIP)
# look up in crbs - to find the matching IP
crbInst = None
for crb in crbs:
if crb['IP'] == dutIP:
crbInst = crb
break
# only run on the dut in known crbs
if crbInst is None:
log_handler.error(" SKIP UNKNOWN CRB")
continue
result.dut = dutIP
# init dut, tester crb
dts_crbs_init(crbInst, skip_setup, read_cache, project, base_dir, nics)
# Run DUT prerequisites
if dts_run_prerequisties(pkgName, patch) is False:
dts_crbs_exit()
continue
dts_run_target(crbInst, targets, test_suites, nics)
dts_crbs_exit()
save_all_results()
def run_all(config_file, pkgName, git, patch, skip_setup, read_cache, project,
suite_dir, test_cases, base_dir, output_dir, verbose, virttype,
debug, debugcase, re_run, commands):
"""
Main process of DTS, it will run all test suites in the config file.
"""
global requested_tests
global result
global excel_report
global json_report
global stats_report
global log_handler
global check_case_inst
# save global variable
serializer = Serializer()
# load check/support case lists
check_case_inst = CheckCase()
# prepare the output folder
if output_dir == '':
output_dir = settings.FOLDERS['Output']
if not os.path.exists(output_dir):
os.mkdir(output_dir)
# add external library
exec_file = os.path.realpath(__file__)
extra_libs_path = exec_file.replace('framework/dts.py', '') + 'extra_libs'
sys.path.insert(1, extra_libs_path)
# add python module search path
sys.path.append(suite_dir)
# enable debug mode
if debug is True:
settings.save_global_setting(settings.DEBUG_SETTING, 'yes')
if debugcase is True:
settings.save_global_setting(settings.DEBUG_CASE_SETTING, 'yes')
# init log_handler handler
if verbose is True:
logger.set_verbose()
if re_run < 0:
re_run = 0
logger.log_dir = output_dir
log_handler = getLogger('dts')
log_handler.config_execution('dts')
# run designated test case
requested_tests = test_cases
# Read config file
dts_cfg_folder = settings.load_global_setting(settings.DTS_CFG_FOLDER)
if dts_cfg_folder != '':
config_file = dts_cfg_folder + os.sep + config_file
config = ConfigParser.SafeConfigParser()
load_cfg = config.read(config_file)
if len(load_cfg) == 0:
raise ConfigParseException(config_file)
# parse commands
dts_commands = dts_parse_commands(commands)
os.environ["TERM"] = "dumb"
# change rst output folder
rst.path2Result = output_dir
# report objects
excel_report = ExcelReporter(output_dir + '/test_results.xls')
json_report = JSONReporter(output_dir + '/test_results.json')
stats_report = StatsReporter(output_dir + '/statistics.txt')
result = Result()
crbInsts = []
crbs_conf = CrbsConf()
crbs = crbs_conf.load_crbs_config()
# for all Execution sections
for section in config.sections():
dts_parse_param(config, section)
# verify if the delimiter is good if the lists are vertical
duts, targets, test_suites = dts_parse_config(config, section)
for dut in duts:
log_handler.info("\nDUT " + dut)
# look up in crbs - to find the matching IP
for dut in duts:
for crb in crbs:
if crb['section'] == dut:
crbInsts.append(crb)
break
# only run on the dut in known crbs
if len(crbInsts) == 0:
log_handler.error(" SKIP UNKNOWN CRB")
continue
result.dut = duts[0]
# init global lock
create_parallel_locks(len(duts))
# init dut, tester crb
duts, tester = dts_crbs_init(crbInsts, skip_setup, read_cache, project,
base_dir, serializer, virttype)
tester.set_re_run(re_run)
# register exit action
atexit.register(quit_execution, duts, tester)
check_case_inst.check_dut(duts[0])
# Run DUT prerequisites
if dts_run_prerequisties(duts, tester, pkgName, patch, dts_commands,
serializer) is False:
dts_crbs_exit(duts, tester)
continue
dts_run_target(duts, tester, targets, test_suites)
dts_crbs_exit(duts, tester)
save_all_results()
def run_all(config_file, pkgName, patch, force_setup, read_cache, project,
suite_dir, test_cases, base_dir, output_dir, verbose, virttype,
debug, debugcase, re_run, commands, pktgen, test_configs):
"""
Main process of DTS, it will run all test suites in the config file.
"""
global requested_tests
global result
global excel_report
global json_report
global stats_report
global log_handler
global check_case_inst
# save global variable
serializer = Serializer()
# load check/support case lists
check_case_inst = CheckCase()
# prepare the output folder
if output_dir == '':
output_dir = settings.FOLDERS['Output']
if not os.path.exists(output_dir):
os.mkdir(output_dir)
# add python module search path
sys.path.append(suite_dir)
# enable debug mode
if debug is True:
settings.save_global_setting(settings.DEBUG_SETTING, 'yes')
if debugcase is True:
settings.save_global_setting(settings.DEBUG_CASE_SETTING, 'yes')
# init log_handler handler
if verbose is True:
logger.set_verbose()
if re_run < 0:
re_run = 0
logger.log_dir = output_dir
log_handler = getLogger('dts')
log_handler.config_execution('dts')
# run designated test case
requested_tests = test_cases
# Read config file
dts_cfg_folder = settings.load_global_setting(settings.DTS_CFG_FOLDER)
if dts_cfg_folder != '':
config_file = dts_cfg_folder + os.sep + config_file
config = ConfigParser.SafeConfigParser()
load_cfg = config.read(config_file)
if len(load_cfg) == 0:
raise ConfigParseException(config_file)
# parse commands
dts_commands = dts_parse_commands(commands)
os.environ["TERM"] = "dumb"
# change rst output folder
rst.path2Result = output_dir
# report objects
excel_report = ExcelReporter(output_dir + '/test_results.xls')
json_report = JSONReporter(output_dir + '/test_results.json')
stats_report = StatsReporter(output_dir + '/statistics.txt')
result = Result()
crbInsts = []
crbs_conf = CrbsConf()
crbs = crbs_conf.load_crbs_config()
# for all Exectuion sections
for section in config.sections():
# Skip configuration sections
if section in ['DPDK', 'Pktgen', 'Tester_DPDK', 'Tester_Pktgen',\
'latency', 'reset']:
continue
dts_parse_param(config, section)
# verify if the delimiter is good if the lists are vertical
duts, targets, test_suites = dts_parse_config(config, section)
# look up in crbs - to find the matching IP
for dut in duts:
for crb in crbs:
if crb['section'] == dut:
crbInsts.append(crb)
break
# only run on the dut in known crbs
if len(crbInsts) == 0:
log_handler.error(" SKIP UNKNOWN CRB")
continue
result.dut = duts[0]
# init dut, tester crb
duts, testers = dts_crbs_init(crbInsts, read_cache, project, base_dir,
serializer, virttype, test_configs)
for tester in testers:
tester.set_re_run(re_run)
# register exit action
atexit.register(quit_execution, duts, testers)
check_case_inst.change_dut(duts[0])
test_configs["force_setup"] = force_setup
# Check if set-up is installed on all CRBs:
if force_setup is False:
setup_ready = True
dut_dpdk_repo = parse_repo(dict(config.items("DPDK")))
dut_pktgen_repo = parse_repo(dict(config.items("Pktgen")))
for dut in duts:
setup_ready = setup_ready and dut.check_setup(
dut_dpdk_repo, dut_pktgen_repo,
test_configs["skip_target_env_setup"])
tester_dpdk_repo = parse_repo(dict(config.items("Tester_DPDK")))\
if "Tester_DPDK" in config.sections() else dut_dpdk_repo
tester_pktgen_repo = parse_repo(dict(config.items("Tester_Pktgen")))\
if "Tester_Pktgen" in config.sections() else dut_pktgen_repo
for tester in testers:
setup_ready = setup_ready and tester.check_setup(
tester_dpdk_repo, tester_pktgen_repo,
test_configs["skip_target_env_setup"])
else:
setup_ready = False
show_speedup_options_messages(read_cache, setup_ready,
test_configs["try_reuse_pcaps"],
test_cases)
for tester in testers:
tester.set_speedup_options(read_cache, setup_ready)
for dut in duts:
dut.set_speedup_options(read_cache, setup_ready)
# Clone DPDK and Pktgen repos and apply patches
if not setup_ready:
prepare_repos(config, pkgName, pktgen)
# Run DUT prerequisites
if dts_run_prerequisties(duts, testers, pkgName, patch, dts_commands,
serializer, pktgen, test_configs) is False:
dts_crbs_exit(duts, testers)
continue
dts_run_target(duts, testers, targets, test_suites, test_configs)
dts_crbs_exit(duts, testers)
save_all_results()