def build_model(mesh, param):
mdl = smodel.Model()
memb = sgeom.castToTmPatch(mesh.getPatch('memb'))
ssys = smodel.Surfsys('ssys', mdl)
memb.addSurfsys('ssys')
L = smodel.Chan('L', mdl)
Leak = smodel.ChanState('Leak', mdl, L)
# membrane conductance
area_cylinder = np.pi * param['diameter'] * param['length']
L_G_tot = area_cylinder / param['R_M']
g_leak_sc = L_G_tot / len(memb.tris)
OC_L = smodel.OhmicCurr('OC_L', ssys, chanstate = Leak, erev = param['E_M'], g = g_leak_sc)
return mdl
def setUp(self):
mdl = smodel.Model()
S1 = smodel.Spec('S1', mdl)
vsys = smodel.Volsys('vsys', mdl)
ssys = smodel.Surfsys('ssys', mdl)
smodel.Reac('R01', vsys, lhs=[S1], rhs=[S1], kcst=1)
smodel.SReac('SR01', ssys, slhs=[S1], srhs=[S1], kcst=1)
vrange = [-200.0e-3, 50e-3, 1e-3]
vrate = lambda v: 2.0
Chan1 = smodel.Chan('Chan1', mdl)
chanop = smodel.ChanState('chanop', mdl, Chan1)
chancl = smodel.ChanState('chancl', mdl, Chan1)
smodel.VDepSReac('VDSR01',
ssys,
slhs=[chancl],
srhs=[chanop],
k=vrate,
vrange=vrange)
smodel.VDepSReac('VDSR02',
ssys,
srhs=[chancl],
slhs=[chanop],
k=vrate,
vrange=vrange)
Chan1_Ohm_I = smodel.OhmicCurr('Chan1_Ohm_I',
ssys,
chanstate=chanop,
g=20e-12,
erev=-77e-3)
if __name__ == "__main__":
self.mesh = meshio.importAbaqus('meshes/test.inp', 1e-7)[0]
else:
self.mesh = meshio.importAbaqus(
'missing_solver_methods_test/meshes/test.inp', 1e-7)[0]
comp1 = sgeom.TmComp('comp1', self.mesh, range(self.mesh.countTets()))
comp1.addVolsys('vsys')
patch1 = sgeom.TmPatch('patch1', self.mesh, self.mesh.getSurfTris(),
comp1)
patch1.addSurfsys('ssys')
self.c1ROIInds = range(10)
self.p1ROIInds = range(5)
self.mesh.addROI('comp1ROI', sgeom.ELEM_TET, self.c1ROIInds)
self.mesh.addROI('patch1ROI', sgeom.ELEM_TRI, self.p1ROIInds)
membrane = sgeom.Memb('membrane', self.mesh, [patch1], opt_method=1)
rng = srng.create('mt19937', 512)
rng.initialize(1234)
self.sim = ssolver.Tetexact(mdl, self.mesh, rng, True)
self.sim.setEfieldDT(1e-4)
self.sim.reset()
kcst=diro2_t)
SKO1C3 = smodel.SReac('SKO1C3',
ssys_stoch,
slhs=[SK_O1],
srhs=[SK_C3],
kcst=invo1_t)
SKO2C4 = smodel.SReac('SKO2C4',
ssys_stoch,
slhs=[SK_O2],
srhs=[SK_C4],
kcst=invo2_t)
OC1_SK = smodel.OhmicCurr('OC1_SK',
ssys_stoch,
chanstate=SK_O1,
erev=SK_rev,
g=SK_G)
OC2_SK = smodel.OhmicCurr('OC2_SK',
ssys_stoch,
chanstate=SK_O2,
erev=SK_rev,
g=SK_G)
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
########### MESH & COMPARTMENTALIZATION #################
##########Import Mesh
AMPAC2C1 = smodel.SReac('AMPAC2C1', ssys_chans, slhs = [AMPA_C2], srhs = [AMPA_C1], kcst = ru2)
AMPAOC2 = smodel.SReac('AMPAOC2', ssys_chans, slhs = [AMPA_O], srhs = [AMPA_C2], kcst = rc)
AMPAD1 = smodel.SReac('AMPAD1', ssys_chans, slhs = [AMPA_C1], srhs = [AMPA_D1], kcst = rd)
AMPAD2 = smodel.SReac('AMPAD2', ssys_chans, slhs = [AMPA_C2], srhs = [AMPA_D2], kcst = rd)
AMPARD1 = smodel.SReac('AMPARD1', ssys_chans, slhs = [AMPA_D1], srhs = [AMPA_C1], kcst = rr)
AMPARD2 = smodel.SReac('AMPARD2', ssys_chans, slhs = [AMPA_D2], srhs = [AMPA_C2], kcst = rr)
###### Leak current channel #####
L = smodel.Chan('L', mdl_stoch)
Leak = smodel.ChanState('Leak', mdl_stoch, L)
OC_L = smodel.OhmicCurr('OC_L', ssys_stoch, chanstate = Leak, erev = L_rev, g = L_G)
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
########### MESH & COMPARTMENTALIZATION #################
##########Import Mesh for EField calculation
# For stochastic sim:
meshfile_ab = 'chop_mesh.inp'
mesh_stoch, nodep, tetp, trip = meshio.importAbaqus('./meshes/'+meshfile_ab,1e-6)
tetgroups = tetp.blocksToGroups()
k=lambda V: 1.0e3 *3.*a_n(V*1.0e3)* Qt, vrange = Vrange)
Kn2n3 = smodel.VDepSReac('Kn2n3', ssys, slhs = [K_n2], srhs = [K_n3], \
k=lambda V: 1.0e3 *2.*a_n(V*1.0e3)* Qt, vrange = Vrange)
Kn3n4 = smodel.VDepSReac('Kn3n4', ssys, slhs = [K_n3], srhs = [K_n4], \
k=lambda V: 1.0e3 *1.*a_n(V*1.0e3)* Qt, vrange = Vrange)
Kn4n3 = smodel.VDepSReac('Kn4n3', ssys, slhs = [K_n4], srhs = [K_n3], \
k=lambda V: 1.0e3 *4.*b_n(V*1.0e3)* Qt, vrange = Vrange)
Kn3n2 = smodel.VDepSReac('Kn3n2', ssys, slhs = [K_n3], srhs = [K_n2], \
k=lambda V: 1.0e3 *3.*b_n(V*1.0e3)* Qt, vrange = Vrange)
Kn2n1 = smodel.VDepSReac('Kn2n1', ssys, slhs = [K_n2], srhs = [K_n1], \
k=lambda V: 1.0e3 *2.*b_n(V*1.0e3)* Qt, vrange = Vrange)
Kn1n0 = smodel.VDepSReac('Kn1n0', ssys, slhs = [K_n1], srhs = [K_n0], \
k=lambda V: 1.0e3 *1.*b_n(V*1.0e3)* Qt, vrange = Vrange)
OC_K = smodel.OhmicCurr('OC_K', ssys, chanstate=K_n4, g=K_G, erev=K_rev)
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# Sodium channel
Nachan = smodel.Chan('Nachan', mdl)
Na_m0h0 = smodel.ChanState('Na_m0h0', mdl, Nachan)
Na_m1h0 = smodel.ChanState('Na_m1h0', mdl, Nachan)
Na_m2h0 = smodel.ChanState('Na_m2h0', mdl, Nachan)
Na_m3h0 = smodel.ChanState('Na_m3h0', mdl, Nachan)
Na_m0h1 = smodel.ChanState('Na_m0h1', mdl, Nachan)
Na_m1h1 = smodel.ChanState('Na_m1h1', mdl, Nachan)
Na_m2h1 = smodel.ChanState('Na_m2h1', mdl, Nachan)
Na_m3h1 = smodel.ChanState('Na_m3h1', mdl, Nachan)
Na_m0h1_m1h1 = smodel.VDepSReac('Na_m0h1_m1h1', ssys, \
ssys,
slhs=[BK_O2],
srhs=[BK_C2],
k=lambda V: b_2(V))
BKO3C3 = smodel.VDepSReac('BKO3C3',
ssys,
slhs=[BK_O3],
srhs=[BK_C3],
k=lambda V: b_3(V))
BKO4C4 = smodel.VDepSReac('BKO4C4',
ssys,
slhs=[BK_O4],
srhs=[BK_C4],
k=lambda V: b_4(V))
OC_BK0 = smodel.OhmicCurr('OC_BK0', ssys, chanstate=BK_O0, erev=BK_rev, g=BK_G)
OC_BK1 = smodel.OhmicCurr('OC_BK1', ssys, chanstate=BK_O1, erev=BK_rev, g=BK_G)
OC_BK2 = smodel.OhmicCurr('OC_BK2', ssys, chanstate=BK_O2, erev=BK_rev, g=BK_G)
OC_BK3 = smodel.OhmicCurr('OC_BK3', ssys, chanstate=BK_O3, erev=BK_rev, g=BK_G)
OC_BK4 = smodel.OhmicCurr('OC_BK4', ssys, chanstate=BK_O4, erev=BK_rev, g=BK_G)
###### SK channel ################## DETERMINISTIC
SKchan = smodel.Chan('SKchan', mdl)
SK_C1 = smodel.ChanState('SK_C1', mdl, SKchan)
SK_C2 = smodel.ChanState('SK_C2', mdl, SKchan)
SK_C3 = smodel.ChanState('SK_C3', mdl, SKchan)
SK_C4 = smodel.ChanState('SK_C4', mdl, SKchan)
SK_O1 = smodel.ChanState('SK_O1', mdl, SKchan)
SK_O2 = smodel.ChanState('SK_O2', mdl, SKchan)
ssys,
slhs=[Na_m1h0],
srhs=[Na_m1h1],
k=lambda V: 1.0e3 * _b_h(V * 1.0e3))
Na_m2h0_m2h1 = smodel.VDepSReac('Na_m2h0_m2h1',
ssys,
slhs=[Na_m2h0],
srhs=[Na_m2h1],
k=lambda V: 1.0e3 * _b_h(V * 1.0e3))
Na_m3h0_m3h1 = smodel.VDepSReac('Na_m3h0_m3h1',
ssys,
slhs=[Na_m3h0],
srhs=[Na_m3h1],
k=lambda V: 1.0e3 * _b_h(V * 1.0e3))
OC_K = smodel.OhmicCurr('OC_K', ssys, chanstate=K_n4, erev=K_rev, g=K_G / K_ro)
OC_Na = smodel.OhmicCurr('OC_Na',
ssys,
chanstate=Na_m3h0,
erev=Na_rev,
g=Na_G / Na_ro)
# Mesh geometry
mesh = meshio.loadMesh('./meshes/' + meshfile)[0]
cyto = sgeom.TmComp('cyto', mesh, range(mesh.ntets))
# The tetrahedrons from which to record potential
POT_TET = zeros(POT_N, dtype='uint')
i = 0
for t in maxztris:
memb_tris.remove(t)
# Create the membrane with the tris removed at faces
memb = sgeom.TmPatch('memb', mesh, memb_tris, cyto)
memb.addSurfsys('ssys')
corr_fac_area = memb.getArea() / surfarea_cyl
membrane = sgeom.Memb('membrane', mesh, [memb])
# Set the single-channel conductance:
g_leak_sc = L_G_tot / len(memb_tris)
OC_L = smodel.OhmicCurr('OC_L',
ssys,
chanstate=Leak,
erev=leak_rev,
g=g_leak_sc)
# Create random number generator
r = srng.create('mt19937', 512)
r.initialize(7)
# Create solver object
sim = ssolver.Tetexact(mdl, mesh, r, True)
surfarea_mesh = sim.getPatchArea('memb')
surfarea_cyl = 1.0 * math.pi * 1000 * 1e-12
vol_cyl = math.pi * (diam / 2.0) * (diam / 2.0) * 1000 * 1e-18
vol_mesh = sim.getCompVol('cyto')
def test_rallpack3():
print("Rallpack 3 with TetODE")
#meshfile ='axon_cube_L1000um_D866m_600tets'
meshfile = 'axon_cube_L1000um_D866m_1135tets'
#meshfile = 'axon_cube_L1000um_D866nm_1978tets'
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# Potassium conductance, Siemens/m^2
K_G = 360
# Sodium conductance, Siemens/m^2
Na_G = 1200
# Leak conductance, Siemens/m^2
L_G = 0.25
# Potassium reversal potential, V
K_rev = -77e-3
# Sodium reversal potential, V
Na_rev = 50e-3
# Leak reveral potential, V
leak_rev = -65.0e-3
# Potassium channel density
K_ro = 18.0e12
# Sodium channel density
Na_ro = 60.0e12
# Total leak conductance for ideal cylinder:
surfarea_cyl = 1.0 * np.pi * 1000 * 1e-12
L_G_tot = L_G * surfarea_cyl
# A table of potassium density factors at -65mV, found in getpops. n0, n1, n2, n3, n4
K_FACS = [0.216750577045, 0.40366011853, 0.281904943772, \
0.0874997924409, 0.0101845682113 ]
# A table of sodium density factors. m0h1, m1h1, m2h1, m3h1, m0h0, m1h0, m2h0, m3h0
NA_FACS = [0.343079175644, 0.0575250437508, 0.00321512825945, 5.98988373918e-05, \
0.506380603793, 0.0849062503811, 0.00474548939393, 8.84099403236e-05]
# Ohm.m
Ra = 1.0
# # # # # # # # # # # # # # # # SIMULATION CONTROLS # # # # # # # # # # # # # #
# The simulation dt (seconds); for TetODE this is equivalent to EField dt
SIM_DT = 5.0e-6
# Sim end time (seconds)
SIM_END = 0.1
# The number of sim 'time points'; * SIM_DT = sim end time
SIM_NTPNTS = int(SIM_END / SIM_DT) + 1
# The current injection in amps
Iinj = 0.1e-9
# # # # # # # # # # # # # DATA COLLECTION # # # # # # # # # # # # # # # # # #
# record potential at the two extremes along (z) axis
POT_POS = np.array([0.0, 1.0e-03])
POT_N = len(POT_POS)
# Length of the mesh, in m
LENGTH = 1000.0e-6
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
mdl = smodel.Model()
ssys = smodel.Surfsys('ssys', mdl)
# K channel
K = smodel.Chan('K', mdl)
K_n0 = smodel.ChanState('K_n0', mdl, K)
K_n1 = smodel.ChanState('K_n1', mdl, K)
K_n2 = smodel.ChanState('K_n2', mdl, K)
K_n3 = smodel.ChanState('K_n3', mdl, K)
K_n4 = smodel.ChanState('K_n4', mdl, K)
# Na channel
Na = smodel.Chan('Na', mdl)
Na_m0h1 = smodel.ChanState('Na_m0h1', mdl, Na)
Na_m1h1 = smodel.ChanState('Na_m1h1', mdl, Na)
Na_m2h1 = smodel.ChanState('Na_m2h1', mdl, Na)
Na_m3h1 = smodel.ChanState('Na_m3h1', mdl, Na)
Na_m0h0 = smodel.ChanState('Na_m0h0', mdl, Na)
Na_m1h0 = smodel.ChanState('Na_m1h0', mdl, Na)
Na_m2h0 = smodel.ChanState('Na_m2h0', mdl, Na)
Na_m3h0 = smodel.ChanState('Na_m3h0', mdl, Na)
# Leak
L = smodel.Chan('L', mdl)
Leak = smodel.ChanState('Leak', mdl, L)
# Gating kinetics
_a_m = lambda mV: ((((0.1 * (25 - (mV + 65.)) / (np.exp(
(25 - (mV + 65.)) / 10.) - 1)))))
_b_m = lambda mV: ((((4. * np.exp(-((mV + 65.) / 18.))))))
_a_h = lambda mV: ((((0.07 * np.exp((-(mV + 65.) / 20.))))))
_b_h = lambda mV: ((((1. / (np.exp((30 - (mV + 65.)) / 10.) + 1)))))
_a_n = lambda mV: ((((0.01 * (10 - (mV + 65.)) / (np.exp(
(10 - (mV + 65.)) / 10.) - 1)))))
_b_n = lambda mV: ((((0.125 * np.exp(-(mV + 65.) / 80.)))))
Kn0n1 = smodel.VDepSReac('Kn0n1',
ssys,
slhs=[K_n0],
srhs=[K_n1],
k=lambda V: 1.0e3 * 4. * _a_n(V * 1.0e3))
Kn1n2 = smodel.VDepSReac('Kn1n2',
ssys,
slhs=[K_n1],
srhs=[K_n2],
k=lambda V: 1.0e3 * 3. * _a_n(V * 1.0e3))
Kn2n3 = smodel.VDepSReac('Kn2n3',
ssys,
slhs=[K_n2],
srhs=[K_n3],
k=lambda V: 1.0e3 * 2. * _a_n(V * 1.0e3))
Kn3n4 = smodel.VDepSReac('Kn3n4',
ssys,
slhs=[K_n3],
srhs=[K_n4],
k=lambda V: 1.0e3 * 1. * _a_n(V * 1.0e3))
Kn4n3 = smodel.VDepSReac('Kn4n3',
ssys,
slhs=[K_n4],
srhs=[K_n3],
k=lambda V: 1.0e3 * 4. * _b_n(V * 1.0e3))
Kn3n2 = smodel.VDepSReac('Kn3n2',
ssys,
slhs=[K_n3],
srhs=[K_n2],
k=lambda V: 1.0e3 * 3. * _b_n(V * 1.0e3))
Kn2n1 = smodel.VDepSReac('Kn2n1',
ssys,
slhs=[K_n2],
srhs=[K_n1],
k=lambda V: 1.0e3 * 2. * _b_n(V * 1.0e3))
Kn1n0 = smodel.VDepSReac('Kn1n0',
ssys,
slhs=[K_n1],
srhs=[K_n0],
k=lambda V: 1.0e3 * 1. * _b_n(V * 1.0e3))
Na_m0h1_m1h1 = smodel.VDepSReac('Na_m0h1_m1h1',
ssys,
slhs=[Na_m0h1],
srhs=[Na_m1h1],
k=lambda V: 1.0e3 * 3. * _a_m(V * 1.0e3))
Na_m1h1_m2h1 = smodel.VDepSReac('Na_m1h1_m2h1',
ssys,
slhs=[Na_m1h1],
srhs=[Na_m2h1],
k=lambda V: 1.0e3 * 2. * _a_m(V * 1.0e3))
Na_m2h1_m3h1 = smodel.VDepSReac('Na_m2h1_m3h1',
ssys,
slhs=[Na_m2h1],
srhs=[Na_m3h1],
k=lambda V: 1.0e3 * 1. * _a_m(V * 1.0e3))
Na_m3h1_m2h1 = smodel.VDepSReac('Na_m3h1_m2h1',
ssys,
slhs=[Na_m3h1],
srhs=[Na_m2h1],
k=lambda V: 1.0e3 * 3. * _b_m(V * 1.0e3))
Na_m2h1_m1h1 = smodel.VDepSReac('Na_m2h1_m1h1',
ssys,
slhs=[Na_m2h1],
srhs=[Na_m1h1],
k=lambda V: 1.0e3 * 2. * _b_m(V * 1.0e3))
Na_m1h1_m0h1 = smodel.VDepSReac('Na_m1h1_m0h1',
ssys,
slhs=[Na_m1h1],
srhs=[Na_m0h1],
k=lambda V: 1.0e3 * 1. * _b_m(V * 1.0e3))
Na_m0h0_m1h0 = smodel.VDepSReac('Na_m0h0_m1h0',
ssys,
slhs=[Na_m0h0],
srhs=[Na_m1h0],
k=lambda V: 1.0e3 * 3. * _a_m(V * 1.0e3))
Na_m1h0_m2h0 = smodel.VDepSReac('Na_m1h0_m2h0',
ssys,
slhs=[Na_m1h0],
srhs=[Na_m2h0],
k=lambda V: 1.0e3 * 2. * _a_m(V * 1.0e3))
Na_m2h0_m3h0 = smodel.VDepSReac('Na_m2h0_m3h0',
ssys,
slhs=[Na_m2h0],
srhs=[Na_m3h0],
k=lambda V: 1.0e3 * 1. * _a_m(V * 1.0e3))
Na_m3h0_m2h0 = smodel.VDepSReac('Na_m3h0_m2h0',
ssys,
slhs=[Na_m3h0],
srhs=[Na_m2h0],
k=lambda V: 1.0e3 * 3. * _b_m(V * 1.0e3))
Na_m2h0_m1h0 = smodel.VDepSReac('Na_m2h0_m1h0',
ssys,
slhs=[Na_m2h0],
srhs=[Na_m1h0],
k=lambda V: 1.0e3 * 2. * _b_m(V * 1.0e3))
Na_m1h0_m0h0 = smodel.VDepSReac('Na_m1h0_m0h0',
ssys,
slhs=[Na_m1h0],
srhs=[Na_m0h0],
k=lambda V: 1.0e3 * 1. * _b_m(V * 1.0e3))
Na_m0h1_m0h0 = smodel.VDepSReac('Na_m0h1_m0h0',
ssys,
slhs=[Na_m0h1],
srhs=[Na_m0h0],
k=lambda V: 1.0e3 * _a_h(V * 1.0e3))
Na_m1h1_m1h0 = smodel.VDepSReac('Na_m1h1_m1h0',
ssys,
slhs=[Na_m1h1],
srhs=[Na_m1h0],
k=lambda V: 1.0e3 * _a_h(V * 1.0e3))
Na_m2h1_m2h0 = smodel.VDepSReac('Na_m2h1_m2h0',
ssys,
slhs=[Na_m2h1],
srhs=[Na_m2h0],
k=lambda V: 1.0e3 * _a_h(V * 1.0e3))
Na_m3h1_m3h0 = smodel.VDepSReac('Na_m3h1_m3h0',
ssys,
slhs=[Na_m3h1],
srhs=[Na_m3h0],
k=lambda V: 1.0e3 * _a_h(V * 1.0e3))
Na_m0h0_m0h1 = smodel.VDepSReac('Na_m0h0_m0h1',
ssys,
slhs=[Na_m0h0],
srhs=[Na_m0h1],
k=lambda V: 1.0e3 * _b_h(V * 1.0e3))
Na_m1h0_m1h1 = smodel.VDepSReac('Na_m1h0_m1h1',
ssys,
slhs=[Na_m1h0],
srhs=[Na_m1h1],
k=lambda V: 1.0e3 * _b_h(V * 1.0e3))
Na_m2h0_m2h1 = smodel.VDepSReac('Na_m2h0_m2h1',
ssys,
slhs=[Na_m2h0],
srhs=[Na_m2h1],
k=lambda V: 1.0e3 * _b_h(V * 1.0e3))
Na_m3h0_m3h1 = smodel.VDepSReac('Na_m3h0_m3h1',
ssys,
slhs=[Na_m3h0],
srhs=[Na_m3h1],
k=lambda V: 1.0e3 * _b_h(V * 1.0e3))
OC_K = smodel.OhmicCurr('OC_K',
ssys,
chanstate=K_n4,
erev=K_rev,
g=K_G / K_ro)
OC_Na = smodel.OhmicCurr('OC_Na',
ssys,
chanstate=Na_m3h0,
erev=Na_rev,
g=Na_G / Na_ro)
# Mesh geometry
mesh = meshio.loadMesh('validation_efield/meshes/' + meshfile)[0]
cyto = sgeom.TmComp('cyto', mesh, range(mesh.ntets))
# The tetrahedrons from which to record potential
POT_TET = np.zeros(POT_N, dtype='uint')
i = 0
for p in POT_POS:
# Assuming axiz aligned with z-axis
POT_TET[i] = mesh.findTetByPoint([0.0, 0.0, POT_POS[i]])
i = i + 1
# Find the tets connected to the bottom face
# First find all the tets with ONE face on a boundary
boundtets = []
#store the 0to3 index of the surface triangle for each of these boundary tets
bt_srftriidx = []
for i in range(mesh.ntets):
tettemp = mesh.getTetTetNeighb(i)
if (tettemp[0] == -1 or tettemp[1] == -1 or tettemp[2] == -1
or tettemp[3] == -1):
boundtets.append(i)
templist = []
if (tettemp[0] == -1):
templist.append(0)
if (tettemp[1] == -1):
templist.append(1)
if (tettemp[2] == -1):
templist.append(2)
if (tettemp[3] == -1):
templist.append(3)
bt_srftriidx.append(templist)
assert (boundtets.__len__() == bt_srftriidx.__len__())
# Find the tets on the z=0 and z=1000um boundaries, and the triangles
minztets = []
minztris = []
maxztris = []
minzverts = set([])
boundminz = mesh.getBoundMin()[2] + LENGTH / mesh.ntets
boundmaxz = mesh.getBoundMax()[2] - LENGTH / mesh.ntets
for i in range(boundtets.__len__()):
# get the boundary triangle
for btriidx in bt_srftriidx[i]:
zminboundtri = True
tribidx = mesh.getTetTriNeighb(boundtets[i])[btriidx]
tritemp = mesh.getTri(tribidx)
trizs = [0.0, 0.0, 0.0]
trizs[0] = mesh.getVertex(tritemp[0])[2]
trizs[1] = mesh.getVertex(tritemp[1])[2]
trizs[2] = mesh.getVertex(tritemp[2])[2]
for j in range(3):
if (trizs[j] > boundminz): zminboundtri = False
if (zminboundtri):
minztets.append(boundtets[i])
minztris.append(tribidx)
minzverts.add(tritemp[0])
minzverts.add(tritemp[1])
minzverts.add(tritemp[2])
continue
zmaxboundtri = True
for j in range(3):
if (trizs[j] < boundmaxz): zmaxboundtri = False
if (zmaxboundtri):
maxztris.append(tribidx)
n_minztris = len(minztris)
assert (n_minztris > 0)
minzverts = list(minzverts)
n_minzverts = len(minzverts)
assert (n_minzverts > 0)
memb_tris = list(mesh.getSurfTris())
# Doing this now, so will inject into first little z section
for t in minztris:
memb_tris.remove(t)
for t in maxztris:
memb_tris.remove(t)
# Create the membrane with the tris removed at faces
memb = sgeom.TmPatch('memb', mesh, memb_tris, cyto)
memb.addSurfsys('ssys')
membrane = sgeom.Memb('membrane',
mesh, [memb],
opt_method=2,
search_percent=100.0)
# Set the single-channel conductance:
g_leak_sc = L_G_tot / len(memb_tris)
OC_L = smodel.OhmicCurr('OC_L',
ssys,
chanstate=Leak,
erev=leak_rev,
g=g_leak_sc)
# Create the solver objects
sim = ssolver.TetODE(mdl, mesh, calcMembPot=True)
sim.setTolerances(1.0e-6, 1e-6)
surfarea_mesh = sim.getPatchArea('memb')
surfarea_cyl = 1.0 * np.pi * 1000 * 1e-12
corr_fac_area = surfarea_mesh / surfarea_cyl
vol_cyl = np.pi * 0.5 * 0.5 * 1000 * 1e-18
vol_mesh = sim.getCompVol('cyto')
corr_fac_vol = vol_mesh / vol_cyl
RES_POT = np.zeros((SIM_NTPNTS, POT_N))
for t in memb_tris:
sim.setTriCount(t, 'Leak', 1)
sim.setPatchCount('memb', 'Na_m0h1', (Na_ro * surfarea_cyl * NA_FACS[0]))
sim.setPatchCount('memb', 'Na_m1h1', (Na_ro * surfarea_cyl * NA_FACS[1]))
sim.setPatchCount('memb', 'Na_m2h1', (Na_ro * surfarea_cyl * NA_FACS[2]))
sim.setPatchCount('memb', 'Na_m3h1', (Na_ro * surfarea_cyl * NA_FACS[3]))
sim.setPatchCount('memb', 'Na_m0h0', (Na_ro * surfarea_cyl * NA_FACS[4]))
sim.setPatchCount('memb', 'Na_m1h0', (Na_ro * surfarea_cyl * NA_FACS[5]))
sim.setPatchCount('memb', 'Na_m2h0', (Na_ro * surfarea_cyl * NA_FACS[6]))
sim.setPatchCount('memb', 'Na_m3h0', (Na_ro * surfarea_cyl * NA_FACS[7]))
sim.setPatchCount('memb', 'K_n0', (K_ro * surfarea_cyl * K_FACS[0]))
sim.setPatchCount('memb', 'K_n1', (K_ro * surfarea_cyl * K_FACS[1]))
sim.setPatchCount('memb', 'K_n2', (K_ro * surfarea_cyl * K_FACS[2]))
sim.setPatchCount('memb', 'K_n3', (K_ro * surfarea_cyl * K_FACS[3]))
sim.setPatchCount('memb', 'K_n4', (K_ro * surfarea_cyl * K_FACS[4]))
sim.setMembPotential('membrane', -65e-3)
sim.setMembVolRes('membrane', Ra * corr_fac_vol)
sim.setMembCapac('membrane', 0.01 / corr_fac_area)
for v in minzverts:
sim.setVertIClamp(v, Iinj / n_minzverts)
for l in range(SIM_NTPNTS):
sim.run(SIM_DT * l)
for p in range(POT_N):
RES_POT[l, p] = sim.getTetV(int(POT_TET[p])) * 1.0e3
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# Benchmark
# At 0um- the end of the mesh
ifile_benchmark_x0 = open(
'validation_efield/data/rallpack3_benchmark/rallpack3_0_0.001dt_1000seg',
'r')
# At 1000um- the end of the mesh
ifile_benchmark_x1000 = open(
'validation_efield/data/rallpack3_benchmark/rallpack3_1000_0.001dt_1000seg',
'r')
tpnt_benchmark = []
v_benchmark_x0 = []
v_benchmark_x1000 = []
lines_benchmark_x0 = ifile_benchmark_x0.readlines()[2:]
# Read in mv and ms
for line_benchmark_x0 in lines_benchmark_x0:
nums = line_benchmark_x0.split()
tpnt_benchmark.append(float(nums[0]))
v_benchmark_x0.append(float(nums[1]))
lines_benchmark_x1000 = ifile_benchmark_x1000.readlines()[2:]
for line_benchmark_x1000 in lines_benchmark_x1000:
nums = line_benchmark_x1000.split()
v_benchmark_x1000.append(float(nums[1]))
# Get rid of the last point which seems to be missing from STEPS
v_benchmark_x0 = v_benchmark_x0[:-1]
tpnt_benchmark = tpnt_benchmark[:-1]
v_benchmark_x1000 = v_benchmark_x1000[:-1]
rms0 = stats(v_benchmark_x0, RES_POT[:, 0])
assert (rms0 < 0.15)
rms1000 = stats(v_benchmark_x1000, RES_POT[:, 1])
assert (rms1000 < 1.1)
srhs=[BK_C2],
k=lambda V: b_2(V))
BKO3C3 = smodel.VDepSReac('BKO3C3',
ssys_stoch,
slhs=[BK_O3],
srhs=[BK_C3],
k=lambda V: b_3(V))
BKO4C4 = smodel.VDepSReac('BKO4C4',
ssys_stoch,
slhs=[BK_O4],
srhs=[BK_C4],
k=lambda V: b_4(V))
OC_BK0 = smodel.OhmicCurr('OC_BK0',
ssys_stoch,
chanstate=BK_O0,
erev=BK_rev,
g=BK_G)
OC_BK1 = smodel.OhmicCurr('OC_BK1',
ssys_stoch,
chanstate=BK_O1,
erev=BK_rev,
g=BK_G)
OC_BK2 = smodel.OhmicCurr('OC_BK2',
ssys_stoch,
chanstate=BK_O2,
erev=BK_rev,
g=BK_G)
OC_BK3 = smodel.OhmicCurr('OC_BK3',
ssys_stoch,
chanstate=BK_O3,