def publish_current_observation(data, ch):
co = data['current_observation']
current_obs = {
'timestamp' : time_util.dt_from_epoch_with_tz(int(co['local_epoch']), co['local_tz_long']),
'station_id' : co['station_id'],
'temp_C' : co['temp_c'],
'windchill_C' : _float(co['windchill_c']),
'dewpoint_C' : co['dewpoint_c'],
'rel_humid' : _float(co['relative_humidity'].replace("%", "")),
'windspeed_mph' : co['wind_mph'],
'windgust_mph' : co['wind_gust_mph'],
'wind_dir' : co['wind_degrees'],
'pressure_mb' : _float(co['pressure_mb']),
'visibility_mi' : _float(co['visibility_mi']),
'weather' : co['weather'],
'precip_mm' : {
'1hr' : _float(co['precip_1hr_metric']),
'today' : _float(co['precip_today_metric']),
},
}
# publish to wx.current_observation
ch.basic_publish(
exchange='weather',
routing_key='current_observation',
properties = pika.BasicProperties(
content_type = 'application/json'
),
body = serializer_utils.serialize(current_obs, 'application/json')
)
def publish_hourly_forecast(data, ch):
hourly_forecast = []
for hf in data['hourly_forecast']:
hf['FCTTIME'] = fcttime_to_datetime(hf['FCTTIME'])
hourly_forecast.append({
'timestamp' : hf['FCTTIME'],
'condition' : (hf['condition'], hf['fctcode']),
'temp_C' : _float(hf['temp']['metric']),
'dewpoint_C' : _float(hf['dewpoint']['metric']),
'windchill_C' : _float(hf['windchill']['metric']),
'rel_humid' : _float(hf['humidity']),
'windspeed_mph' : _float(hf['wspd']['english']),
'wind_dir' : _float(hf['wdir']['degrees']),
'pct_of_precip' : _float(hf['pop']),
'qpf_mm' : _float(hf['qpf']['metric']),
'snow_mm' : _float(hf['snow']['metric']),
'sky' : _float(hf['sky']),
'uvi' : _float(hf['uvi']),
})
# publish to wx.hourly_forecast
ch.basic_publish(
exchange='weather',
routing_key='hourly_forecast',
properties = pika.BasicProperties(
content_type = 'application/json'
),
body = serializer_utils.serialize(hourly_forecast, 'application/json')
)
def publish_sensor_data(self, routing_key, body):
with self.__publisher_chan_lock:
self.__publisher_chan.basic_publish(
exchange = 'sensor_data',
routing_key = routing_key,
properties = pika.BasicProperties(
content_type = serializer_utils.CONTENT_TYPE_JSON
),
body = serializer_utils.serialize(body, serializer_utils.CONTENT_TYPE_JSON)
)
def publish_event(self, routing_key, event, **kwargs):
with self.__publisher_chan_lock:
self.__publisher_chan.basic_publish(
exchange = 'events',
routing_key = routing_key,
properties = pika.BasicProperties(
content_type = serializer_utils.CONTENT_TYPE_JSON
),
body = serializer_utils.serialize(
{
'name' : event,
'data' : kwargs,
},
serializer_utils.CONTENT_TYPE_JSON
)
)
def __runner(self):
"""
The thread target; handles RPC invocations and publishes the result
"""
conn = pika.BlockingConnection(self.__connection_params)
chan = conn.channel()
chan.add_on_return_callback(self.__on_returned_msg)
while not self.__shutdown_event.is_set():
try:
req = self.__pending_requests.get(True, 5)
self._logger.debug("invoking %r", req)
response = {}
try:
response['result'] = req.callback(*req.args)
except:
self._logger.warn("exception invoking %r", req, exc_info = True)
# the exception value
response['exception'] = sys.exc_info()[1]
resp_body = serializer_utils.serialize(response, req.content_type)
chan.basic_publish(
exchange='',
routing_key = req.reply_to,
properties = pika.BasicProperties(
correlation_id = req.correlation_id,
content_type = req.content_type,
),
body = resp_body
)
except Queue.Empty:
pass
conn.close()
def __handle_timeout(self):
# self._logger.debug("timeout fired")
if not self.__shutdown:
self.__connection.add_timeout(0.5, self.__handle_timeout)
while not self.__rpc_queue.empty():
request = self.__pending_requests[self.__rpc_queue.get()]
self._logger.debug("publishing message for ticket %s", request.ticket)
self.__channel.basic_publish(
exchange="",
routing_key=request.queue,
mandatory=True,
properties=pika.BasicProperties(
reply_to=self.__private_queue_name, correlation_id=request.ticket, content_type=_CONTENT_TYPE
),
body=serializer_utils.serialize({"command": request.command, "args": request.args}, _CONTENT_TYPE),
)
def __dispatch_xb_frame(self, frame):
"""handles incoming XBee frames"""
# @todo make utctime, but this will affect the db logger, and the
# plotter, too!
frame['_timestamp'] = SYSTEM_TZ.localize(datetime.datetime.now())
try:
if 'frame_id' in frame:
# this is a response of some kind
self._logger.debug(
"found reply of type %s with frame_id %02x",
frame['id'], ord(frame['frame_id'])
)
with self.__correlation_lock:
if frame['frame_id'] in self.__correlations:
correlation = self.__correlations[frame['frame_id']]
props = correlation['props']
keep_alive = correlation['keep_alive']
self._xb_rx_chan.basic_publish(
exchange = '',
routing_key = props.reply_to,
properties = pika.BasicProperties(
correlation_id = props.correlation_id,
content_type = _CONTENT_TYPE
),
body = serializer_utils.serialize(frame, _CONTENT_TYPE)
)
if not keep_alive:
del self.__correlations[frame['frame_id']]
else:
self._logger.error(
"no correlation found for response: %r", frame
)
# this needs to get called every now and then
self.__reap_unfinished_requests()
else:
frame_addr = 'unknown'
if 'source_addr' in frame:
frame_addr = format_addr(frame['source_addr'])
if 'source_addr_long' in frame:
frame_addr = format_addr(frame['source_addr_long'])
# something like "zb_rx.00:11:22:33:44:55:66:0a"
routing_key = '%s.%s' % (frame['id'], frame_addr)
self._logger.debug("routing_key: %s", routing_key)
self._xb_rx_chan.basic_publish(
exchange = self.RAW_XBEE_PACKET_EXCHANGE,
routing_key = routing_key,
properties = pika.BasicProperties(
content_type = _CONTENT_TYPE
),
body = serializer_utils.serialize(frame, _CONTENT_TYPE)
)
except:
self._logger.error(
"unhandled exception processing incoming frame",
exc_info = True
)
with self.__rpc_chan_lock:
# keep_alive tells the remote end to keep the request around for
# multiple replies
self.__rpc_chan.basic_publish(
exchange = '',
routing_key = 'xbee_tx',
properties = pika.BasicProperties(
reply_to = self.__queue_name,
correlation_id = req.ticket,
content_type = serializer_utils.CONTENT_TYPE_BINARY,
headers = dict(keep_alive = str(async))
),
immediate = True,
mandatory = True,
body = serializer_utils.serialize(req.msg_body, serializer_utils.CONTENT_TYPE_BINARY)
)
if not async:
# wait 30s for the reply to our call to be received
req.event.wait(30)
if not req.event.is_set():
raise NoResponse("no reply received for %r" % req)
return req.response
else:
return req
# }}}
