def _init_win(self, window): '''Require at least 70 columns and 6 lines to fit current needs for display of partitions and slices. Builds two inner ScrollWindows for displaying/editing the data. ''' if self.area.columns < 70: raise ValueError("Insufficient space - area.columns < 70") if self.area.lines < 6: raise ValueError("Insufficient space - area.lines < 6") self.win_width = (self.area.columns - DiskWindow.DEAD_ZONE + DiskWindow.SCROLL_PAD) / 2 super(DiskWindow, self)._init_win(window) win_area = WindowArea(self.area.lines - 1, self.win_width, 2, 0) win_area.scrollable_lines = self.area.lines - 2 self.left_win = ScrollWindow(win_area, window=self, add_obj=False) self.left_win.color = None self.left_win.highlight_color = None win_area.x_loc = self.win_width + DiskWindow.DEAD_ZONE win_area.scrollable_lines = 2 * MAX_EXT_PARTS self.right_win = ScrollWindow(win_area, window=self, add_obj=False) self.right_win.color = None self.right_win.highlight_color = None
def _show(self): super(NSNISAuto, self)._show() if self.nameservice.nameservice != 'NIS': raise SkipException y_loc = self._paint_opening() y_loc += self.center_win.add_paragraph(self.intro2, y_loc) y_loc += 1 ynlist = [_('Find one'), _('Specify one')] area = WindowArea(x_loc=0, y_loc=y_loc, scrollable_lines=len(ynlist) + 1) area.lines = self.win_size_y - (y_loc + 1) area.columns = self.win_size_x self.scroll_region = ScrollWindow(area, window=self.center_win) y_loc += 1 # blank line # add the entries to the screen for idx, yon in enumerate(ynlist): y_loc += 1 win_area = WindowArea(lines=1, columns=textwidth(yon) + 1, y_loc=idx, x_loc=INDENT) ListItem(win_area, window=self.scroll_region, text=yon, data_obj=yon) self.main_win.do_update() self.center_win.activate_object(self.scroll_region) self.scroll_region.activate_object_force(self.cur_nisnschoice_idx, force_to_top=True) y_loc += 1 # blank line self.center_win.add_paragraph(self.intro3, y_loc)
def _show(self): '''Prepare a text summary and display it to the user in a ScrollWindow ''' global LOGGER LOGGER = logging.getLogger(INSTALL_LOGGER_NAME) self.sysconfig = solaris_install.sysconfig.profile.from_engine() y_loc = 1 y_loc += self.center_win.add_paragraph(SummaryScreen.PARAGRAPH, y_loc) y_loc += 1 summary_text = self.build_summary() LOGGER.info( "The following configuration is used for " "installation: %s\n", summary_text) # Wrap the summary text, accounting for the INDENT (used below in # the call to add_paragraph) max_chars = self.win_size_x - SummaryScreen.INDENT - 1 summary_text = convert_paragraph(summary_text, max_chars) area = WindowArea(x_loc=0, y_loc=y_loc, scrollable_lines=(len(summary_text) + 1)) area.lines = self.win_size_y - y_loc area.columns = self.win_size_x scroll_region = ScrollWindow(area, window=self.center_win) scroll_region.add_paragraph(summary_text, start_x=SummaryScreen.INDENT) self.center_win.activate_object(scroll_region)
def display_help(self): '''Display the single file help screen''' # customize header help_header = "%s: %s" terminalui.LOGGER.debug("self.screen is =%s", self.screen) if self.screen in self.help_dict: help_header = help_header % (_("Help"), self.help_dict[self.screen][1]) help_text = self.get_help_text(self.help_dict[self.screen][0]) else: help_header = help_header % (_("Help"), _("Not Available")) help_text = _("Help for this screen is not available") self.main_win.set_header_text(help_header) help_text = convert_paragraph(help_text, self.win_size_x - 5) terminalui.LOGGER.debug("help_text #lines=%d, text is \n%s", len(help_text), help_text) area = WindowArea(x_loc=0, y_loc=1, scrollable_lines=(len(help_text) + 1)) area.lines = self.win_size_y - 1 area.columns = self.win_size_x self.scroll_region = ScrollWindow(area, window=self.center_win) self.scroll_region.add_paragraph(help_text, start_x=(area.x_loc + 3)) self.center_win.activate_object(self.scroll_region)
def _show(self): ''' called upon display of a screen ''' super(NSDNSChooser, self)._show() y_loc = self._paint_opening() LOGGER.debug(self.nameservice) # allow the user to choose DNS or not ynlist = [_('Configure DNS'), _('Do not configure DNS')] area = WindowArea(x_loc=0, y_loc=y_loc, scrollable_lines=len(ynlist) + 1) area.lines = self.win_size_y - (y_loc + 1) area.columns = self.win_size_x self.scroll_region_dns = ScrollWindow(area, window=self.center_win) # add the entries to the screen for idx, yon in enumerate(ynlist): win_area = WindowArea(1, textwidth(yon) + 1, idx, INDENT) ListItem(win_area, window=self.scroll_region_dns, text=yon, data_obj=yon) # finalize positioning self.main_win.do_update() self.center_win.activate_object(self.scroll_region_dns) self.scroll_region_dns.activate_object_force(self.cur_dnschoice_idx, force_to_top=True)
def _show(self): ''' called upon display of a screen ''' super(NSAltChooser, self)._show() y_loc = self._paint_opening() LOGGER.debug(self.nameservice) # allow the user to select an alternate name service area = WindowArea(x_loc=0, y_loc=y_loc, scrollable_lines=len(NameService.USER_CHOICE_LIST) + 1) area.lines = self.win_size_y - (y_loc + 1) area.columns = self.win_size_x self.scroll_region = ScrollWindow(area, window=self.center_win) # add the entries to the screen menu_item_max_width = self.win_size_x - NameService.SCROLL_SIZE for idx, nsn in enumerate(NameService.USER_CHOICE_LIST): y_loc += 1 hilite = min(menu_item_max_width, textwidth(nsn) + 1) win_area = WindowArea(1, hilite, idx, INDENT) ListItem(win_area, window=self.scroll_region, text=nsn, data_obj=nsn) # finalize positioning self.main_win.do_update() self.center_win.activate_object(self.scroll_region) self.scroll_region.activate_object_force(self.cur_nschoice_idx, force_to_top=True)
def _show(self): '''Prepare a text summary and display it to the user in a ScrollWindow ''' global LOGGER LOGGER = logging.getLogger(INSTALL_LOGGER_NAME) self.sysconfig = solaris_install.sysconfig.profile.from_engine() y_loc = 1 y_loc += self.center_win.add_paragraph(SummaryScreen.PARAGRAPH, y_loc) y_loc += 1 summary_text = self.build_summary() LOGGER.info("The following configuration is used for " "installation: %s\n", summary_text) # Wrap the summary text, accounting for the INDENT (used below in # the call to add_paragraph) max_chars = self.win_size_x - SummaryScreen.INDENT - 1 summary_text = convert_paragraph(summary_text, max_chars) area = WindowArea(x_loc=0, y_loc=y_loc, scrollable_lines=(len(summary_text) + 1)) area.lines = self.win_size_y - y_loc area.columns = self.win_size_x scroll_region = ScrollWindow(area, window=self.center_win) scroll_region.add_paragraph(summary_text, start_x=SummaryScreen.INDENT) self.center_win.activate_object(scroll_region)
def test_active_object(self): '''Test that arrow key changes active object''' lines = 4 extra_lines = 9 scroll_win = ScrollWindow(WindowArea(lines, 70, 0, 0, scrollable_lines=lines + extra_lines), color_theme=ColorTheme(force_bw=True)) scroll_win.active_object = 0 myobj0 = MockEditField() myobj0.area = MockInnerWin() myobj0.area.y_loc = 1 myobj0.active = True myobj1 = MockEditField() myobj1.area = MockInnerWin() myobj1.area.y_loc = 3 myobj1.active = False scroll_win.objects.append(myobj0) scroll_win.objects.append(myobj1) key = scroll_win.on_arrow_key(curses.KEY_DOWN) self.assertEquals(key, None) self.assertEquals(scroll_win.active_object, 1)
def test_scroll_no_args(self): '''Test that scroll called with no args throws ValueError''' scroll_win = ScrollWindow(WindowArea(70, 70, 0, 0, scrollable_lines=75), color_theme=ColorTheme(force_bw=True)) self.assertTrue(scroll_win.get_use_vert_scroll_bar()) self.assertEquals(scroll_win.current_line[0], 0) self.assertRaises(ValueError, scroll_win.scroll)
def test_scroll_no_args(self): '''Test that scroll called with no args throws ValueError''' scroll_win = ScrollWindow(WindowArea(70, 70, 0, 0, scrollable_lines=75), color_theme=ColorTheme(force_bw=True)) self.assertTrue(scroll_win.get_use_vert_scroll_bar()) self.assertEquals(scroll_win.current_line[0], 0) self.assertRaises(ValueError, scroll_win.scroll)
def test_scroll_to_bottom(self): '''Test to scroll multiple lines to bottom of scrollarea''' lines = 70 extra_lines = 5 scroll_win = ScrollWindow(WindowArea(lines, 70, 0, 0, scrollable_lines=lines + extra_lines), color_theme=ColorTheme(force_bw=True)) scroll_win.scroll(scroll_to_line=5) self.assertTrue(scroll_win.at_bottom())
def test_scroll_one_col(self): '''Test to scroll one column ''' scroll_win = ScrollWindow(WindowArea(70, 70, 0, 0, scrollable_columns=75), color_theme=ColorTheme(force_bw=True)) self.assertTrue(scroll_win.get_use_horiz_scroll_bar()) self.assertEquals(scroll_win.current_line[1], 0) scroll_win.scroll(columns=1) self.assertEquals(scroll_win.current_line[1], 1)
def test_scroll_to_right(self): '''Test to scroll multiple columns to right of scrollarea''' cols = 70 extra_cols = 5 scroll_win = ScrollWindow(WindowArea(70, cols, 0, 0, scrollable_columns=cols+extra_cols), color_theme=ColorTheme(force_bw=True)) scroll_win.scroll(scroll_to_column=5) self.assertTrue(scroll_win.at_right())
def _show(self): '''Create a scrollable region and fill it with the install log''' self.center_win.border_size = (0, 0) self.scroll_area = WindowArea(self.win_size_y, self.win_size_x, 0, 0, len(self.get_log_data())) log = ScrollWindow(self.scroll_area, window=self.center_win) log.add_paragraph(self.get_log_data(), 0, 2) self.center_win.activate_object(log)
def test_scroll_one_line(self): '''Test to scroll one line ''' scroll_win = ScrollWindow(WindowArea(70, 70, 0, 0, scrollable_lines=75), color_theme=ColorTheme(force_bw=True)) self.assertTrue(scroll_win.get_use_vert_scroll_bar()) self.assertEquals(scroll_win.current_line[0], 0) scroll_win.scroll(lines=1) self.assertEquals(scroll_win.current_line[0], 1)
def test_scroll_past_left(self): '''Test to scroll past left, should end up at left ''' cols = 70 extra_cols = 5 scroll_win = ScrollWindow(WindowArea(70, cols, 0, 0, scrollable_columns=cols+extra_cols), color_theme=ColorTheme(force_bw=True)) self.assertTrue(scroll_win.at_left()) scroll_win.scroll(columns=-3) self.assertTrue(scroll_win.at_left())
def test_scroll_past_top(self): '''Test to scroll past top, should end up at top ''' lines = 70 extra_lines = 5 scroll_win = ScrollWindow(WindowArea(lines, 70, 0, 0, scrollable_lines=lines + extra_lines), color_theme=ColorTheme(force_bw=True)) self.assertTrue(scroll_win.at_top()) scroll_win.scroll(lines=-3) self.assertTrue(scroll_win.at_top())
def test_no_ut_refresh(self): '''Ensure deep_refresh is updating nested window screen location ''' scroll_win = ScrollWindow(WindowArea(60, 70, 0, 0, scrollable_columns=75), color_theme=ColorTheme(force_bw=True)) scroll_win.window = MockInnerWin() scroll_win.area.lower_right_y = 20 scroll_win.area.lower_right_x = 20 myscroll = ScrollWindow(WindowArea(10, 10, 0, 0, scrollable_columns=15), color_theme=ColorTheme(force_bw=True)) myscroll.window = MockInnerWin() myscroll.area.lower_right_y = 16 myscroll.area.lower_right_x = 18 scroll_win.objects.append(myscroll) scroll_win.area.y_loc = 3 scroll_win.area.x_loc = 5 abs_y = 12 abs_x = 15 scroll_win.latest_yx = (abs_y, abs_x) scroll_win.no_ut_refresh() self.assertEquals(myscroll.latest_yx[0], scroll_win.area.y_loc + abs_y) self.assertEquals(myscroll.latest_yx[1], scroll_win.area.x_loc + abs_x)
def test_vert_scrollbar_created(self): '''Ensure vertical scrollbar is created or not appropriately''' scroll_win = ScrollWindow(WindowArea(70, 70, 0, 0, scrollable_lines=75), color_theme=ColorTheme(force_bw=True)) self.assertTrue(scroll_win.get_use_vert_scroll_bar()) scroll_win = ScrollWindow(WindowArea(70, 70, 0, 0, scrollable_lines=70), color_theme=ColorTheme(force_bw=True)) self.assertFalse(scroll_win.get_use_vert_scroll_bar())
def test_horiz_scrollbar_created(self): '''Ensure horizontal scrollbar is created or not appropriately''' scroll_win = ScrollWindow(WindowArea(70, 70, 0, 0, scrollable_columns=75), color_theme=ColorTheme(force_bw=True)) self.assertTrue(scroll_win.get_use_horiz_scroll_bar()) scroll_win = ScrollWindow(WindowArea(70, 70, 0, 0, scrollable_columns=69), color_theme=ColorTheme(force_bw=True)) self.assertFalse(scroll_win.get_use_horiz_scroll_bar())
def test_act_obj_indexerr_not_edge(self): '''Test arrow key, active object, IndexError, not at edge''' lines = 4 extra_lines = 9 scroll_win = ScrollWindow(WindowArea(lines, 70, 0, 0, scrollable_lines=lines + extra_lines), color_theme=ColorTheme(force_bw=True)) scroll_win.active_object = 0 scroll_win.objects.append(object()) key = scroll_win.on_arrow_key(curses.KEY_DOWN) self.assertEquals(scroll_win.current_line[0], 1) self.assertEquals(key, None)
class NSNISAuto(NameService): HEADER_TEXT = _("NIS Name Server") HELP_DATA = (SCI_HELP + "/%s/nis.txt", HEADER_TEXT) def __init__(self, main_win, screen=None): super(NSNISAuto, self).__init__(main_win) self.intro = \ _("Specify how to find a name server for this system.") self.intro2 = \ _("Either let the software search for a name server, " "or specify a name server in the following screen. ") self.intro3 = \ _("The software can find a name server only if that " "server is on the local subnet.") def _show(self): super(NSNISAuto, self)._show() if self.nameservice.nameservice != 'NIS': raise SkipException y_loc = self._paint_opening() y_loc += self.center_win.add_paragraph(self.intro2, y_loc) y_loc += 1 ynlist = [_('Find one'), _('Specify one')] area = WindowArea(x_loc=0, y_loc=y_loc, scrollable_lines=len(ynlist) + 1) area.lines = self.win_size_y - (y_loc + 1) area.columns = self.win_size_x self.scroll_region = ScrollWindow(area, window=self.center_win) y_loc += 1 # blank line # add the entries to the screen for idx, yon in enumerate(ynlist): y_loc += 1 win_area = WindowArea(lines=1, columns=textwidth(yon) + 1, y_loc=idx, x_loc=INDENT) ListItem(win_area, window=self.scroll_region, text=yon, data_obj=yon) self.main_win.do_update() self.center_win.activate_object(self.scroll_region) self.scroll_region.activate_object_force(self.cur_nisnschoice_idx, force_to_top=True) y_loc += 1 # blank line self.center_win.add_paragraph(self.intro3, y_loc) def on_change_screen(self): self.cur_nisnschoice_idx = self.scroll_region.active_object idx = self.cur_nisnschoice_idx self.nameservice.nis_auto = idx
def test_scroll_to_right(self): '''Test to scroll multiple columns to right of scrollarea''' cols = 70 extra_cols = 5 scroll_win = ScrollWindow(WindowArea(70, cols, 0, 0, scrollable_columns=cols + extra_cols), color_theme=ColorTheme(force_bw=True)) scroll_win.scroll(scroll_to_column=5) self.assertTrue(scroll_win.at_right())
def test_scroll_to_bottom(self): '''Test to scroll multiple lines to bottom of scrollarea''' lines = 70 extra_lines = 5 scroll_win = ScrollWindow(WindowArea(lines, 70, 0, 0, scrollable_lines=lines + extra_lines), color_theme=ColorTheme(force_bw=True)) scroll_win.scroll(scroll_to_line=5) self.assertTrue(scroll_win.at_bottom())
def _show(self): '''Display the static paragraph WELCOME_TEXT and all applicable bullet items''' sc_options = get_sc_options_from_doc() max_width = self.win_size_x - WelcomeScreen.INDENT - 1 text = convert_paragraph(WelcomeScreen.WELCOME_TEXT, max_width) # list configuration groups in a comma-separated list with # bullet on first line and indentation on subsequent lines grouplist = list() if configure_group(SC_GROUP_NETWORK): grouplist.append(_("network")) elif configure_group(SC_GROUP_IDENTITY): grouplist.append(_("system hostname")) if configure_group(SC_GROUP_LOCATION): grouplist.append(_("time zone")) if configure_group(SC_GROUP_DATETIME): grouplist.append(_("date and time")) if configure_group(SC_GROUP_USERS): grouplist.append(_("user and root accounts")) if configure_group(SC_GROUP_NS): grouplist.append(_("name services")) grouplist = ", ".join(grouplist) grouplist = convert_paragraph(grouplist, max_width - len(WelcomeScreen.BULLET)) for ln in range(len(grouplist)): if ln == 0: text.append(WelcomeScreen.BULLET + grouplist[ln]) else: text.append(WelcomeScreen.BULLET_INDENT + grouplist[ln]) # display navigation instructions and profile path fmt = {"scprof": sc_options.profile} text.extend(convert_paragraph(WelcomeScreen.NAVIPRO_TEXT % fmt, max_width)) # indent and align while bulletting for bullet in WelcomeScreen.BULLET_ITEMS: btext = convert_paragraph(bullet, max_width - len(WelcomeScreen.BULLET)) for ln in range(len(btext)): if ln == 0: text.append(WelcomeScreen.BULLET + btext[ln]) else: text.append(WelcomeScreen.BULLET_INDENT + btext[ln]) # prepare welcome text in entire window for scrolling area = WindowArea(x_loc=0, y_loc=1, scrollable_lines=(len(text) + 1)) area.lines = self.win_size_y - 1 area.columns = self.win_size_x scroll_region = ScrollWindow(area, window=self.center_win) scroll_region.add_paragraph(text, start_x=WelcomeScreen.INDENT) self.center_win.activate_object(scroll_region)
class NSAltChooser(NameService): HEADER_TEXT = _("Alternate Name Service") HELP_DATA = (SCI_HELP + "/%s/name_service.txt", HEADER_TEXT) def __init__(self, main_win): super(NSAltChooser, self).__init__(main_win) self.intro = \ _("From the list below, select one name service to be " "used by this system. If the desired name service is not " "listed, select None. The selected name service may be " "used in conjunction with DNS.") def _show(self): ''' called upon display of a screen ''' super(NSAltChooser, self)._show() y_loc = self._paint_opening() LOGGER.debug(self.nameservice) # allow the user to select an alternate name service area = WindowArea(x_loc=0, y_loc=y_loc, scrollable_lines=len(NameService.USER_CHOICE_LIST) + 1) area.lines = self.win_size_y - (y_loc + 1) area.columns = self.win_size_x self.scroll_region = ScrollWindow(area, window=self.center_win) # add the entries to the screen menu_item_max_width = self.win_size_x - NameService.SCROLL_SIZE for idx, nsn in enumerate(NameService.USER_CHOICE_LIST): y_loc += 1 hilite = min(menu_item_max_width, textwidth(nsn) + 1) win_area = WindowArea(1, hilite, idx, INDENT) ListItem(win_area, window=self.scroll_region, text=nsn, data_obj=nsn) # finalize positioning self.main_win.do_update() self.center_win.activate_object(self.scroll_region) self.scroll_region.activate_object_force(self.cur_nschoice_idx, force_to_top=True) def on_change_screen(self): ''' called when changes submitted by user for all screens ''' # Save the chosen index and object when leaving the screen self.cur_nschoice_idx = self.scroll_region.active_object idx = self.cur_nschoice_idx LOGGER.info("on_change_screen NS chosen=%s", idx) self.nameservice.nameservice = NameService.CHOICE_LIST[idx]
def _show(self): '''Display the static paragraph WELCOME_TEXT and all applicable bullet items''' sc_options = get_sc_options_from_doc() max_width = self.win_size_x - WelcomeScreen.INDENT - 1 text = convert_paragraph(WelcomeScreen.WELCOME_TEXT, max_width) # list configuration groups in a comma-separated list with # bullet on first line and indentation on subsequent lines grouplist = list() if configure_group(SC_GROUP_NETWORK): grouplist.append(_("network")) elif configure_group(SC_GROUP_IDENTITY): grouplist.append(_("system hostname")) if configure_group(SC_GROUP_LOCATION): grouplist.append(_("time zone")) if configure_group(SC_GROUP_DATETIME): grouplist.append(_("date and time")) if configure_group(SC_GROUP_USERS): grouplist.append(_("user and root accounts")) if configure_group(SC_GROUP_NS): grouplist.append(_("name services")) grouplist = ", ".join(grouplist) grouplist = convert_paragraph(grouplist, max_width - len(WelcomeScreen.BULLET)) for ln in range(len(grouplist)): if ln == 0: text.append(WelcomeScreen.BULLET + grouplist[ln]) else: text.append(WelcomeScreen.BULLET_INDENT + grouplist[ln]) # display navigation instructions and profile path fmt = {"scprof": sc_options.profile} text.extend(convert_paragraph(WelcomeScreen.NAVIPRO_TEXT % fmt, max_width)) # indent and align while bulletting for bullet in WelcomeScreen.BULLET_ITEMS: btext = convert_paragraph(bullet, max_width - len(WelcomeScreen.BULLET)) for ln in range(len(btext)): if ln == 0: text.append(WelcomeScreen.BULLET + btext[ln]) else: text.append(WelcomeScreen.BULLET_INDENT + btext[ln]) # prepare welcome text in entire window for scrolling area = WindowArea(x_loc=0, y_loc=1, scrollable_lines=(len(text) + 1)) area.lines = self.win_size_y - 1 area.columns = self.win_size_x scroll_region = ScrollWindow(area, window=self.center_win) scroll_region.add_paragraph(text, start_x=WelcomeScreen.INDENT) self.center_win.activate_object(scroll_region)
def test_act_obj_indexerr_not_edge(self): '''Test arrow key, active object, IndexError, not at edge''' lines = 4 extra_lines = 9 scroll_win = ScrollWindow(WindowArea(lines, 70, 0, 0, scrollable_lines=lines + extra_lines), color_theme=ColorTheme(force_bw=True)) scroll_win.active_object = 0 scroll_win.objects.append(object()) key = scroll_win.on_arrow_key(curses.KEY_DOWN) self.assertEquals(scroll_win.current_line[0], 1) self.assertEquals(key, None)
class NSDNSChooser(NameService): HEADER_TEXT = _("DNS Name Service") HELP_DATA = (SCI_HELP + "/%s/name_service.txt", HEADER_TEXT) HELP_FORMAT = "%s" def __init__(self, main_win): super(NSDNSChooser, self).__init__(main_win) LOGGER.debug('in NSDNSChooser init') self.intro = \ _("Indicates whether or not the system should use the DNS " "name service.") def _show(self): ''' called upon display of a screen ''' super(NSDNSChooser, self)._show() y_loc = self._paint_opening() LOGGER.debug(self.nameservice) # allow the user to choose DNS or not ynlist = [_('Configure DNS'), _('Do not configure DNS')] area = WindowArea(x_loc=0, y_loc=y_loc, scrollable_lines=len(ynlist) + 1) area.lines = self.win_size_y - (y_loc + 1) area.columns = self.win_size_x self.scroll_region_dns = ScrollWindow(area, window=self.center_win) # add the entries to the screen for idx, yon in enumerate(ynlist): win_area = WindowArea(1, textwidth(yon) + 1, idx, INDENT) ListItem(win_area, window=self.scroll_region_dns, text=yon, data_obj=yon) # finalize positioning self.main_win.do_update() self.center_win.activate_object(self.scroll_region_dns) self.scroll_region_dns.activate_object_force(self.cur_dnschoice_idx, force_to_top=True) def on_change_screen(self): ''' called when changes submitted by user for all screens ''' # Save the chosen index and object when leaving the screen self.cur_dnschoice_idx = self.scroll_region_dns.active_object self.nameservice.dns = (self.cur_dnschoice_idx == 0) LOGGER.info("on_change_screen DNS chosen? %s", self.nameservice.dns)
def display_help_topics(self): '''Display the help topics screen.''' self.main_win.set_header_text(self.help_header) y_loc = 1 y_loc += self.center_win.add_paragraph(self.intro, y_loc, 1, max_x=(self.win_size_x - 1)) y_loc += 1 area = WindowArea(scrollable_lines=(len(self.help_info) + 1), y_loc=y_loc, x_loc=0) terminalui.LOGGER.debug("lines=%s", len(self.help_dict)) area.lines = self.win_size_y - (y_loc + 1) area.columns = self.win_size_x self.scroll_region = ScrollWindow(area, window=self.center_win) # add the entries to the screen terminalui.LOGGER.debug("range=%s", len(self.help_info)) for idx, info in enumerate(self.help_info): # create ListItem for each help topic topic_format = info[1] topic_title = self.help_dict[info[0]][1] help_topic = topic_format % topic_title hilite = min(self.win_size_x, textwidth(help_topic) + 1) list_item = ListItem(WindowArea(1, hilite, idx, 0), window=self.scroll_region, text=help_topic) terminalui.LOGGER.debug("self.screen_last=%s", self.screen_last) if self.screen_last == info[0]: terminalui.LOGGER.debug("Set cur_help_idx = %s", idx) self.cur_help_idx = idx terminalui.LOGGER.debug("beg_y=%d, beg_x=%d", *list_item.window.getbegyx()) self.center_win.activate_object(self.scroll_region) self.scroll_region.activate_object(self.cur_help_idx)
def test_active_object(self): '''Test that arrow key changes active object''' lines = 4 extra_lines = 9 scroll_win = ScrollWindow(WindowArea(lines, 70, 0, 0, scrollable_lines=lines + extra_lines), color_theme=ColorTheme(force_bw=True)) scroll_win.active_object = 0 myobj0 = MockEditField() myobj0.area = MockInnerWin() myobj0.area.y_loc = 1 myobj0.active = True myobj1 = MockEditField() myobj1.area = MockInnerWin() myobj1.area.y_loc = 3 myobj1.active = False scroll_win.objects.append(myobj0) scroll_win.objects.append(myobj1) key = scroll_win.on_arrow_key(curses.KEY_DOWN) self.assertEquals(key, None) self.assertEquals(scroll_win.active_object, 1)
def _show(self): super(NSLDAPProxyBindChooser, self)._show() # check dictionary of screens associated with name service selections if self.nameservice.nameservice != 'LDAP': raise SkipException y_loc = self._paint_opening() ynlist = [_('No'), _('Yes')] area = WindowArea(x_loc=0, y_loc=y_loc, scrollable_lines=len(ynlist) + 1) area.lines = self.win_size_y - (y_loc + 1) area.columns = self.win_size_x self.scroll_region = ScrollWindow(area, window=self.center_win) # add the entries to the screen for idx, yon in enumerate(ynlist): win_area = WindowArea(1, textwidth(yon) + 1, idx, INDENT) ListItem(win_area, window=self.scroll_region, text=yon, data_obj=yon) self.main_win.do_update() self.center_win.activate_object(self.scroll_region) self.scroll_region.activate_object_force(self.cur_pbchoice_idx, force_to_top=True)
class NSLDAPProxyBindChooser(NameService): HEADER_TEXT = _("LDAP Proxy") HELP_DATA = (SCI_HELP + "/%s/ldap_proxy.txt", HEADER_TEXT) def __init__(self, main_win): super(NSLDAPProxyBindChooser, self).__init__(main_win) self.intro = _('Does the profile specify a proxy credential level ' 'and an authentication method other than None?') def _show(self): super(NSLDAPProxyBindChooser, self)._show() # check dictionary of screens associated with name service selections if self.nameservice.nameservice != 'LDAP': raise SkipException y_loc = self._paint_opening() ynlist = [_('No'), _('Yes')] area = WindowArea(x_loc=0, y_loc=y_loc, scrollable_lines=len(ynlist) + 1) area.lines = self.win_size_y - (y_loc + 1) area.columns = self.win_size_x self.scroll_region = ScrollWindow(area, window=self.center_win) # add the entries to the screen for idx, yon in enumerate(ynlist): win_area = WindowArea(1, textwidth(yon) + 1, idx, INDENT) ListItem(win_area, window=self.scroll_region, text=yon, data_obj=yon) self.main_win.do_update() self.center_win.activate_object(self.scroll_region) self.scroll_region.activate_object_force(self.cur_pbchoice_idx, force_to_top=True) def on_change_screen(self): self.cur_pbchoice_idx = self.scroll_region.active_object idx = self.cur_pbchoice_idx self.nameservice.ldap_proxy_bind = idx
def _show(self): '''Prepare a text summary from the DOC and display it to the user in a ScrollWindow ''' y_loc = 1 y_loc += self.center_win.add_paragraph(SummaryScreen.PARAGRAPH, y_loc) y_loc += 1 self.sysconfig = solaris_install.sysconfig.profile.from_engine() summary_text = self.build_summary() # Wrap the summary text, accounting for the INDENT (used below in # the call to add_paragraph) max_chars = self.win_size_x - SummaryScreen.INDENT - 1 summary_text = convert_paragraph(summary_text, max_chars) area = WindowArea(x_loc=0, y_loc=y_loc, scrollable_lines=(len(summary_text) + 1)) area.lines = self.win_size_y - y_loc area.columns = self.win_size_x scroll_region = ScrollWindow(area, window=self.center_win) scroll_region.add_paragraph(summary_text, start_x=SummaryScreen.INDENT) self.center_win.activate_object(scroll_region)
def _show(self): '''Prepare a text summary from the DOC and display it to the user in a ScrollWindow ''' y_loc = 1 y_loc += self.center_win.add_paragraph(SummaryScreen.PARAGRAPH, y_loc) y_loc += 1 self.sysconfig = solaris_install.sysconfig.profile.from_engine() summary_text = self.build_summary() # Wrap the summary text, accounting for the INDENT (used below in # the call to add_paragraph) max_chars = self.win_size_x - SummaryScreen.INDENT - 1 summary_text = convert_paragraph(summary_text, max_chars) area = WindowArea(x_loc=0, y_loc=y_loc, scrollable_lines=(len(summary_text) + 1)) area.lines = self.win_size_y - y_loc area.columns = self.win_size_x scroll_region = ScrollWindow(area, window=self.center_win) scroll_region.add_paragraph(summary_text, start_x=SummaryScreen.INDENT) self.center_win.activate_object(scroll_region)
def test_scroll_past_bottom(self): '''Test to scroll past bottom, should end up at bottom ''' lines = 70 extra_lines = 5 scroll_win = ScrollWindow(WindowArea(lines, 70, 0, 0, scrollable_lines=lines + extra_lines), color_theme=ColorTheme(force_bw=True)) self.assertTrue(scroll_win.at_top()) self.assertFalse(scroll_win.at_bottom()) scroll_win.scroll(lines=10) self.assertFalse(scroll_win.at_top()) self.assertTrue(scroll_win.at_bottom())
def test_scroll_past_right(self): '''Test to scroll past right, should end up at right ''' cols = 70 extra_cols = 5 scroll_win = ScrollWindow(WindowArea(70, cols, 0, 0, scrollable_columns=cols + extra_cols), color_theme=ColorTheme(force_bw=True)) self.assertTrue(scroll_win.at_left()) self.assertFalse(scroll_win.at_right()) scroll_win.scroll(columns=10) self.assertFalse(scroll_win.at_left()) self.assertTrue(scroll_win.at_right())
def reset(self): '''Create the InnerWindows representing the header, footer/border, error line, and main central_area ''' window_size = self.initscr.getmaxyx() win_size_y = window_size[0] win_size_x = window_size[1] footer_area = WindowArea(1, win_size_x, win_size_y - 1, 0) self.footer = InnerWindow(footer_area, color_theme=self.theme, color=self.theme.border) top = self.initscr.derwin(1, win_size_x, 0, 0) left = self.initscr.derwin(win_size_y - 2, 1, 1, 0) right = self.initscr.derwin(win_size_y - 2, 1, 1, win_size_x - 1) self.footer.more_windows = [top, left, right] self.footer.set_color(self.theme.border) header_area = WindowArea(1, win_size_x - 2, 1, 1) self.header = InnerWindow(header_area, color_theme=self.theme, color=self.theme.header) central_win_area = WindowArea(win_size_y - 4, win_size_x - 2, 2, 1) self.central_area = InnerWindow(central_win_area, border_size=(0, 2), color_theme=self.theme) self._active_win = self.central_area popup_win_area = WindowArea(central_win_area.lines - 10, central_win_area.columns - 20, 5, 10, central_win_area.lines - 10) self.popup_win = ScrollWindow(popup_win_area, window=self.central_area, color=self.theme.error_msg, highlight_color=self.theme.error_msg) error_area = WindowArea(1, win_size_x - 2, win_size_y - 2, 1) self.error_line = ErrorWindow(error_area, color_theme=self.theme) self.reset_actions()
def test_vert_scrollbar_created(self): '''Ensure vertical scrollbar is created or not appropriately''' scroll_win = ScrollWindow(WindowArea(70, 70, 0, 0, scrollable_lines=75), color_theme=ColorTheme(force_bw=True)) self.assertTrue(scroll_win.get_use_vert_scroll_bar()) scroll_win = ScrollWindow(WindowArea(70, 70, 0, 0, scrollable_lines=70), color_theme=ColorTheme(force_bw=True)) self.assertFalse(scroll_win.get_use_vert_scroll_bar())
def test_horiz_scrollbar_created(self): '''Ensure horizontal scrollbar is created or not appropriately''' scroll_win = ScrollWindow(WindowArea(70, 70, 0, 0, scrollable_columns=75), color_theme=ColorTheme(force_bw=True)) self.assertTrue(scroll_win.get_use_horiz_scroll_bar()) scroll_win = ScrollWindow(WindowArea(70, 70, 0, 0, scrollable_columns=69), color_theme=ColorTheme(force_bw=True)) self.assertFalse(scroll_win.get_use_horiz_scroll_bar())
def test_no_ut_refresh(self): '''Ensure deep_refresh is updating nested window screen location ''' scroll_win = ScrollWindow(WindowArea(60, 70, 0, 0, scrollable_columns=75), color_theme=ColorTheme(force_bw=True)) scroll_win.window = MockInnerWin() scroll_win.area.lower_right_y = 20 scroll_win.area.lower_right_x = 20 myscroll = ScrollWindow(WindowArea(10, 10, 0, 0, scrollable_columns=15), color_theme=ColorTheme(force_bw=True)) myscroll.window = MockInnerWin() myscroll.area.lower_right_y = 16 myscroll.area.lower_right_x = 18 scroll_win.objects.append(myscroll) scroll_win.area.y_loc = 3 scroll_win.area.x_loc = 5 abs_y = 12 abs_x = 15 scroll_win.latest_yx = (abs_y, abs_x) scroll_win.no_ut_refresh() self.assertEquals(myscroll.latest_yx[0], scroll_win.area.y_loc + abs_y) self.assertEquals(myscroll.latest_yx[1], scroll_win.area.x_loc + abs_x)
class NICSelect(BaseScreen): '''Allow user to choose which ethernet connection to manually configure''' MAX_NICS = 15 HEADER_TEXT = _("Manual Network Configuration") PARAGRAPH = _("Select the one wired network connection to be configured" " during installation") HELP_DATA = (SCI_HELP + "/%s/network_manual.txt", _("Manual Network Configuration")) HELP_FORMAT = " %s" LIST_OFFSET = 2 def __init__(self, main_win): global LOGGER if LOGGER is None: LOGGER = logging.getLogger(INSTALL_LOGGER_NAME + ".sysconfig") super(NICSelect, self).__init__(main_win) self.list_area = WindowArea(1, 0, 0, NICSelect.LIST_OFFSET) # find_links() returns tuple containing # * dictionary of configurable NICs # * number of NICs mandated from global zone. self.ether_nics = NetworkInfo.find_links()[0] self.nic = None def _show(self): '''Create a list of NICs to choose from. If more than 15 NICs are found, create a scrolling region to put them in ''' self.nic = solaris_install.sysconfig.profile.from_engine().nic if self.nic.type != NetworkInfo.MANUAL: raise SkipException if len(self.ether_nics) == 1: self.set_nic_in_profile(self.ether_nics[0]) raise SkipException if self.nic.nic_iface is None: selected_nic_name = "" else: selected_nic_name = NetworkInfo.get_nic_name(self.nic.nic_iface) y_loc = 1 y_loc += self.center_win.add_paragraph(NICSelect.PARAGRAPH, y_loc) selected_nic = 0 y_loc += 1 max_nics = min(NICSelect.MAX_NICS, self.center_win.area.lines - y_loc) if len(self.ether_nics) > max_nics: columns = self.win_size_x - NICSelect.LIST_OFFSET win_area = WindowArea(lines=max_nics, columns=columns, y_loc=y_loc, x_loc=NICSelect.LIST_OFFSET, scrollable_lines=len(self.ether_nics)) self.scroll_region = ScrollWindow(win_area, window=self.center_win) self.list_region = self.scroll_region y_loc = 0 else: self.scroll_region = None self.list_region = self.center_win for nic in self.ether_nics: self.list_area.y_loc = y_loc # # display list item in form of "NIC name (NIC device)" - # e.g. "net0 (bge0)" # If NIC device is not populated, display just NIC name. # list_item_text = NetworkInfo.get_nic_desc(nic) # list item width self.list_area.columns = len(list_item_text) + 1 list_item = ListItem(self.list_area, window=self.list_region, text=list_item_text, data_obj=nic) if NetworkInfo.get_nic_name(nic) == selected_nic_name: selected_nic = list_item y_loc += 1 self.main_win.do_update() if self.scroll_region: self.center_win.activate_object(self.scroll_region) self.scroll_region.activate_object_force(selected_nic, force_to_top=True) else: self.center_win.activate_object(selected_nic) def on_change_screen(self): '''Save the highlighted NIC as the selected NIC''' selected_nic = self.list_region.get_active_object().data_obj self.set_nic_in_profile(selected_nic) def set_nic_in_profile(self, selected_nic): '''Store selected NIC in the profile ''' LOGGER.info("Selecting %s for manual configuration", NetworkInfo.get_nic_desc(selected_nic)) nic = solaris_install.sysconfig.profile.from_engine().nic nic.nic_iface = selected_nic
def test_scroll_right_left_arrow(self): '''Test to scroll right and left with arrow key ''' cols = 3 extra_cols = 5 scroll_win = ScrollWindow(WindowArea(10, cols, 0, 0, scrollable_columns=cols + extra_cols), color_theme=ColorTheme(force_bw=True)) scroll_win.active_object = None self.assertTrue(scroll_win.at_left()) key = scroll_win.on_arrow_key(curses.KEY_RIGHT) self.assertEqual(key, None) self.assertFalse(scroll_win.at_left()) key = scroll_win.on_arrow_key(curses.KEY_LEFT) self.assertEqual(key, None) self.assertTrue(scroll_win.at_left()) key = scroll_win.on_arrow_key(curses.KEY_LEFT) self.assertEqual(key, curses.KEY_LEFT) self.assertTrue(scroll_win.at_left()) scroll_win.scroll(columns=extra_cols - 2) self.assertFalse(scroll_win.at_left()) self.assertFalse(scroll_win.at_right()) scroll_win.on_arrow_key(curses.KEY_RIGHT) self.assertTrue(scroll_win.at_right()) scroll_win.scroll(columns=-(extra_cols - 2)) self.assertFalse(scroll_win.at_left()) self.assertFalse(scroll_win.at_right()) scroll_win.on_arrow_key(curses.KEY_LEFT) self.assertTrue(scroll_win.at_left())
def _show(self): '''Create a list of NICs to choose from. If more than 15 NICs are found, create a scrolling region to put them in ''' self.nic = solaris_install.sysconfig.profile.from_engine().nic if self.nic.type != NetworkInfo.MANUAL: raise SkipException if len(self.ether_nics) == 1: self.set_nic_in_profile(self.ether_nics[0]) raise SkipException if self.nic.nic_iface is None: selected_nic_name = "" else: selected_nic_name = NetworkInfo.get_nic_name(self.nic.nic_iface) y_loc = 1 y_loc += self.center_win.add_paragraph(NICSelect.PARAGRAPH, y_loc) selected_nic = 0 y_loc += 1 max_nics = min(NICSelect.MAX_NICS, self.center_win.area.lines - y_loc) if len(self.ether_nics) > max_nics: columns = self.win_size_x - NICSelect.LIST_OFFSET win_area = WindowArea(lines=max_nics, columns=columns, y_loc=y_loc, x_loc=NICSelect.LIST_OFFSET, scrollable_lines=len(self.ether_nics)) self.scroll_region = ScrollWindow(win_area, window=self.center_win) self.list_region = self.scroll_region y_loc = 0 else: self.scroll_region = None self.list_region = self.center_win for nic in self.ether_nics: self.list_area.y_loc = y_loc # # display list item in form of "NIC name (NIC device)" - # e.g. "net0 (bge0)" # If NIC device is not populated, display just NIC name. # list_item_text = NetworkInfo.get_nic_desc(nic) # list item width self.list_area.columns = len(list_item_text) + 1 list_item = ListItem(self.list_area, window=self.list_region, text=list_item_text, data_obj=nic) if NetworkInfo.get_nic_name(nic) == selected_nic_name: selected_nic = list_item y_loc += 1 self.main_win.do_update() if self.scroll_region: self.center_win.activate_object(self.scroll_region) self.scroll_region.activate_object_force(selected_nic, force_to_top=True) else: self.center_win.activate_object(selected_nic)
class DiskScreen(BaseScreen): ''' Allow the user to select a (valid) disk target for installation Display the partition/slice table for the highlighted disk ''' HEADER_TEXT = _("Disks") PARAGRAPH = _("Where should %(release)s be installed?") % RELEASE REC_SIZE_TEXT = _("Recommended size: ") MIN_SIZE_TEXT = _(" Minimum size: ") DISK_SEEK_TEXT = _("Seeking disks on system") FOUND_x86 = _("The following partitions were found on the disk.") FOUND_SPARC = _("The following slices were found on the disk.") PROPOSED_x86 = _("A partition table was not found. The following is " "proposed.") PROPOSED_SPARC = _("A VTOC label was not found. The following " "is proposed.") PROPOSED_GPT = _("A GPT labeled disk was found. The following is " "proposed.") TOO_SMALL = _("Too small") TOO_BIG_WARN = _("Limited to %.1f TB") GPT_LABELED = _("GPT labeled disk") NO_DISKS = _("No disks found. Additional device drivers may " "be needed.") NO_TARGETS = _("%(release)s cannot be installed on any disk") % RELEASE TGT_ERROR = _("An error occurred while searching for installation" " targets. Please check the install log and file a bug" " at defect.opensolaris.org.") DISK_HEADERS = [(8, _("Type")), (10, _(" Size(GB)")), (6, _("Boot")), (26, _("Device")), (10, _("Vendor")), (3, ""), (10, _("Notes"))] #blank header for the notes column VENDOR_LEN = 15 SPINNER = ["\\", "|", "/", "-"] DISK_WARNING_HEADER = _("Warning") DISK_WARNING_TOOBIG = _("Only the first %.1fTB can be used.") DISK_WARNING_GPT = _("You have chosen a GPT labeled disk. Installing " "onto a GPT labeled disk will cause the loss " "of all existing data and the disk will be " "relabeled as SMI.") CANCEL_BUTTON = _("Cancel") CONTINUE_BUTTON = _("Continue") HELP_DATA = (TUI_HELP + "/%s/disks.txt", _("Disks")) def __init__(self, main_win, target_controller): global LOGGER LOGGER = logging.getLogger(INSTALL_LOGGER_NAME) super(DiskScreen, self).__init__(main_win) if platform.processor() == "i386": self.found_text = DiskScreen.FOUND_x86 self.proposed_text = DiskScreen.PROPOSED_x86 else: self.found_text = DiskScreen.FOUND_SPARC self.proposed_text = DiskScreen.PROPOSED_SPARC disk_header_text = [] for header in DiskScreen.DISK_HEADERS: header_str = fit_text_truncate(header[1], header[0] - 1, just="left") disk_header_text.append(header_str) self.disk_header_text = " ".join(disk_header_text) max_note_size = DiskScreen.DISK_HEADERS[5][0] self.too_small_text = DiskScreen.TOO_SMALL[:max_note_size] max_disk_size = (Size(MAX_VTOC)).get(Size.tb_units) too_big_warn = DiskScreen.TOO_BIG_WARN % max_disk_size self.too_big_warn = too_big_warn[:max_note_size] self.disk_warning_too_big = \ DiskScreen.DISK_WARNING_TOOBIG % max_disk_size self.disks = [] self.existing_pools = [] self.disk_win = None self.disk_detail = None self.num_targets = 0 self.td_handle = None self._size_line = None self.selected_disk_index = 0 self._minimum_size = None self._recommended_size = None self.engine = InstallEngine.get_instance() self.doc = self.engine.data_object_cache self.tc = target_controller self._target_discovery_completed = False self._target_discovery_status = InstallEngine.EXEC_SUCCESS self._image_size = None def determine_minimum(self): '''Returns minimum install size, fetching first if needed''' self.determine_size_data() return self._minimum_size minimum_size = property(determine_minimum) def determine_recommended(self): '''Returns recommended install size, fetching first if needed''' self.determine_size_data() return self._recommended_size recommended_size = property(determine_recommended) def determine_size_data(self): '''Retrieve the minimum and recommended sizes and generate the string to present that information. ''' if self._minimum_size is None or self._recommended_size is None: self._recommended_size = get_recommended_size(self.tc) self._minimum_size = get_minimum_size(self.tc) def get_size_line(self): '''Returns the line of text displaying the min/recommended sizes''' if self._size_line is None: rec_size_str = locale.format("%.1f", self.recommended_size.get(Size.gb_units)) + LOCALIZED_GB min_size_str = locale.format("%.1f", self.minimum_size.get(Size.gb_units)) + LOCALIZED_GB self._size_line = DiskScreen.REC_SIZE_TEXT + rec_size_str + \ DiskScreen.MIN_SIZE_TEXT + min_size_str return self._size_line size_line = property(get_size_line) def wait_for_disks(self): '''Block while waiting for libtd to finish. Catch F9 and quit if needed ''' self.main_win.actions.pop(curses.KEY_F2, None) self.main_win.actions.pop(curses.KEY_F6, None) self.main_win.actions.pop(curses.KEY_F3, None) self.main_win.show_actions() self.center_win.add_text(DiskScreen.DISK_SEEK_TEXT, 5, 1, self.win_size_x - 3) self.main_win.do_update() offset = textwidth(DiskScreen.DISK_SEEK_TEXT) + 2 spin_index = 0 self.center_win.window.timeout(250) while not self._target_discovery_completed: input_key = self.main_win.getch() if input_key == curses.KEY_F9: if self.confirm_quit(): raise QuitException self.center_win.add_text(DiskScreen.SPINNER[spin_index], 5, offset) self.center_win.no_ut_refresh() self.main_win.do_update() spin_index = (spin_index + 1) % len(DiskScreen.SPINNER) self.center_win.window.timeout(-1) self.center_win.clear() # check the result of target discovery if self._target_discovery_status is not InstallEngine.EXEC_SUCCESS: err_data = (errsvc.get_errors_by_mod_id(TARGET_DISCOVERY))[0] LOGGER.error("Target discovery failed") err = err_data.error_data[liberrsvc.ES_DATA_EXCEPTION] LOGGER.error(err) raise TargetDiscoveryError(("Unexpected error (%s) during target " "discovery. See log for details.") % err) def _td_callback(self, status, errsvc): '''Callback function for Target Discovery checkpoint execution. The status value is saved to be interpreted later. This function sets the self._target_discovery_completed value to true so the wait_for_disks() function will know to stop displaying the spinner. ''' self._target_discovery_status = status self._target_discovery_completed = True def _show(self): '''Create a list of disks to choose from and create the window for displaying the partition/slice information from the selected disk ''' self.wait_for_disks() discovered_target = self.doc.persistent.get_first_child( \ name=Target.DISCOVERED) LOGGER.debug(discovered_target) if discovered_target is None: self.center_win.add_paragraph(DiskScreen.NO_DISKS, 1, 1, max_x=(self.win_size_x - 1)) return self.disks = discovered_target.get_children(class_type=Disk) if not self.disks: self.center_win.add_paragraph(DiskScreen.NO_TARGETS, 1, 1, max_x=(self.win_size_x - 1)) return if self._image_size is None: try: self._image_size = Size(str(get_image_size(LOGGER)) + \ Size.mb_units) LOGGER.debug("Image_size: %s", self._image_size) except: # Unable to get the image size for some reason, allow # the target controller to use it's default size. LOGGER.debug("Unable to get image size") self._image_size = FALLBACK_IMAGE_SIZE # initialize the target controller so the min/max size for # the installation can be calculated. Explicitly do not # want to select an initial disk at this time in case # none of the disks discovered is usable. The target controller # initialization needs to be done everytime we show the disk selection # screen so the desired target node in the DOC can be re-populated # with information from target discovery. self.tc.initialize(image_size=self._image_size, no_initial_disk=True) # Go through all the disks found and find ones that have # enough space for installation. At the same time, see if any # existing disk is the boot disk. If a boot disk is found, move # it to the front of the list num_usable_disks = 0 boot_disk = None for disk in self.disks: LOGGER.debug("size: %s, min: %s" % \ (disk.disk_prop.dev_size, self.minimum_size)) if disk.disk_prop.dev_size >= self.minimum_size: if disk.is_boot_disk(): boot_disk = disk num_usable_disks += 1 if boot_disk is not None: self.disks.remove(boot_disk) self.disks.insert(0, boot_disk) if num_usable_disks == 0: self.center_win.add_paragraph(DiskScreen.NO_DISKS, 1, 1, max_x=(self.win_size_x - 1)) return self.main_win.reset_actions() self.main_win.show_actions() y_loc = 1 self.center_win.add_text(DiskScreen.PARAGRAPH, y_loc, 1) y_loc += 1 self.center_win.add_text(self.size_line, y_loc, 1) y_loc += 2 self.center_win.add_text(self.disk_header_text, y_loc, 1) y_loc += 1 self.center_win.window.hline(y_loc, self.center_win.border_size[1] + 1, curses.ACS_HLINE, textwidth(self.disk_header_text)) y_loc += 1 disk_win_area = WindowArea(4, textwidth(self.disk_header_text) + 2, y_loc, 0) disk_win_area.scrollable_lines = len(self.disks) + 1 self.disk_win = ScrollWindow(disk_win_area, window=self.center_win) disk_item_area = WindowArea(1, disk_win_area.columns - 2, 0, 1) disk_index = 0 len_type = DiskScreen.DISK_HEADERS[0][0] - 1 len_size = DiskScreen.DISK_HEADERS[1][0] - 1 len_boot = DiskScreen.DISK_HEADERS[2][0] - 1 len_dev = DiskScreen.DISK_HEADERS[3][0] - 1 len_mftr = DiskScreen.DISK_HEADERS[4][0] - 1 for disk in self.disks: disk_text_fields = [] if disk.disk_prop is None or disk.disk_prop.dev_type is None: continue type_field = disk.disk_prop.dev_type[:len_type] type_field = ljust_columns(type_field, len_type) disk_text_fields.append(type_field) disk_size = disk.disk_prop.dev_size.get(Size.gb_units) size_field = locale.format("%*.1f", (len_size, disk_size)) disk_text_fields.append(size_field) if disk.is_boot_disk(): bootable_field = "+".center(len_boot) else: bootable_field = " " * (len_boot) disk_text_fields.append(bootable_field) device_field = disk.ctd[:len_dev] device_field = ljust_columns(device_field, len_dev) disk_text_fields.append(device_field) vendor = disk.disk_prop.dev_vendor if vendor is not None: mftr_field = vendor[:len_mftr] mftr_field = ljust_columns(mftr_field, len_mftr) else: mftr_field = " " * len_mftr disk_text_fields.append(mftr_field) selectable = True if disk.disk_prop.dev_size < self.minimum_size: note_field = self.too_small_text selectable = False elif disk_size > Size(MAX_VTOC).get(Size.gb_units): note_field = self.too_big_warn else: note_field = "" disk_text_fields.append(note_field) disk_text = " ".join(disk_text_fields) disk_item_area.y_loc = disk_index disk_list_item = ListItem(disk_item_area, window=self.disk_win, text=disk_text, add_obj=selectable) disk_list_item.on_make_active = on_activate disk_list_item.on_make_active_kwargs["disk"] = disk disk_list_item.on_make_active_kwargs["disk_select"] = self disk_index += 1 self.disk_win.no_ut_refresh() y_loc += 7 disk_detail_area = WindowArea(6, 70, y_loc, 1) self.disk_detail = DiskWindow(disk_detail_area, self.disks[0], target_controller=self.tc, window=self.center_win) self.main_win.do_update() self.center_win.activate_object(self.disk_win) self.disk_win.activate_object(self.selected_disk_index) def on_change_screen(self): ''' Save the index of the current selected object in case the user returns to this screen later ''' # Save the index of the selected object self.selected_disk_index = self.disk_win.active_object LOGGER.debug("disk_selection.on_change_screen, saved_index: %s", self.selected_disk_index) LOGGER.debug(self.doc.persistent) def start_discovery(self): # start target discovery if not self._target_discovery_completed: errsvc.clear_error_list() self.engine.execute_checkpoints(pause_before=TRANSFER_PREP, callback=self._td_callback) def validate(self): '''Validate the size of the disk.''' warning_txt = [] disk = self.disk_detail.ui_obj.doc_obj disk_size_gb = disk.disk_prop.dev_size.get(Size.gb_units) max_size_gb = Size(MAX_VTOC).get(Size.gb_units) if disk_size_gb > max_size_gb: warning_txt.append(self.disk_warning_too_big) warning_txt = " ".join(warning_txt) if warning_txt: # warn the user and give user a chance to change result = self.main_win.pop_up(DiskScreen.DISK_WARNING_HEADER, warning_txt, DiskScreen.CANCEL_BUTTON, DiskScreen.CONTINUE_BUTTON) if not result: raise UIMessage() # let user select different disk
class TimeZone(BaseScreen): '''Allow user to select timezone based on already selected continent and country. ''' UTC_TEXT = _("UTC/GMT") SCROLL_SIZE = 2 BORDER_WIDTH = (0, 3) REGIONS = "regions" LOCATIONS = "locations" TIMEZONE = "timezone" HELP_DATA = (SCI_HELP + "/%s/timezone.txt", _("Time Zone")) def __init__(self, main_win, screen=None): global LOGGER if LOGGER is None: LOGGER = logging.getLogger(INSTALL_LOGGER_NAME + ".sysconfig") super(TimeZone, self).__init__(main_win) self.sys_info = None if screen is None: self.screen = TimeZone.TIMEZONE else: self.screen = screen self.tz_tuples = None self.tz_list = None self.cur_timezone_idx = 0 self.cur_timezone_parent = None self.last_timezone_parent = None self.cur_continent = None self.cur_country = None self.scroll_region = None self.last_country = None self.last_continent = None if self.screen == TimeZone.TIMEZONE: self.header_text = _("Time Zone") self.intro = _("Select your time zone.") self.title = _("Time Zones") elif self.screen == TimeZone.LOCATIONS: self.header_text = _("Time Zone: Locations") self.intro = _("Select the location that contains your time zone.") self.title = _("Locations") self.help_data = (None, None) else: self.header_text = _("Time Zone: Regions") self.intro = _("Select the region that contains your time zone.") self.title = _("Regions") self.help_data = (None, None) def _show(self): '''Create the list of time zones''' LOGGER.debug("self.screen %s", self.screen) sc_profile = solaris_install.sysconfig.profile.from_engine() if sc_profile.system is None: sc_profile.system = SystemInfo() self.sys_info = sc_profile.system self.cur_country = self.sys_info.tz_country self.cur_continent = self.sys_info.tz_region if self.cur_continent == SystemInfo.UTC and self.screen != "regions": raise SkipException self.center_win.border_size = TimeZone.BORDER_WIDTH if self.screen == TimeZone.LOCATIONS: self.cur_timezone_parent = self.cur_continent elif self.screen == TimeZone.TIMEZONE: self.cur_timezone_parent = self.cur_country LOGGER.debug("cur_continent %s, cur_country %s", self.cur_continent, self.cur_country) y_loc = 1 y_loc += self.center_win.add_paragraph(self.intro, y_loc) y_loc += 1 menu_item_max_width = self.win_size_x - TimeZone.SCROLL_SIZE self.center_win.add_text(self.title, y_loc, TimeZone.SCROLL_SIZE) y_loc += 1 self.center_win.window.hline(y_loc, 3, curses.ACS_HLINE, 40) y_loc += 1 tz_list = self.get_timezones(self.cur_continent, self.cur_country) area = WindowArea(x_loc=0, y_loc=y_loc, scrollable_lines=len(tz_list) + 1) area.lines = self.win_size_y - (y_loc + 1) area.columns = self.win_size_x LOGGER.debug("area.lines=%s, area.columns=%s", area.lines, area.columns) self.scroll_region = ScrollWindow(area, window=self.center_win) utc = 0 if self.screen == TimeZone.REGIONS: utc_area = WindowArea(1, len(TimeZone.UTC_TEXT) + 1, 0, TimeZone.SCROLL_SIZE) utc_item = ListItem(utc_area, window=self.scroll_region, text=TimeZone.UTC_TEXT, data_obj=SystemInfo.UTC) utc = 1 # add the entries to the screen for idx, timezone in enumerate(tz_list): LOGGER.log(LOG_LEVEL_INPUT, "tz idx = %i name= %s", idx, tz_list[idx]) hilite = min(menu_item_max_width, len(timezone) + 1) win_area = WindowArea(1, hilite, idx + utc, TimeZone.SCROLL_SIZE) list_item = ListItem(win_area, window=self.scroll_region, text=timezone, data_obj=timezone) y_loc += 1 self.main_win.do_update() self.center_win.activate_object(self.scroll_region) LOGGER.debug("self.cur_timezone_idx=%s", self.cur_timezone_idx) self.scroll_region.activate_object_force(self.cur_timezone_idx, force_to_top=True) def get_timezones(self, continent, country_code): '''Get the timezone info, a list of tuples, each with: [0] timezone name [1] timezone name descriptive [2] localized timezone name ''' LOGGER.debug("get_timezones continent=%s", continent) LOGGER.debug("get_timezones country_code=%s", country_code) LOGGER.debug("get_timezones self.cur_timezone_parent=%s," " self.last_timezone_parent=%s", self.cur_timezone_parent, self.last_timezone_parent) if (self.tz_list is None or self.cur_timezone_parent != self.last_timezone_parent): self.tz_list = [] self.cur_timezone_idx = 0 # pass get_tz_info the correct parameters: # none - to get regions/continents # continent ("America") - to get countries # continent and country code ("America", "US") - to get the # timezones if self.screen == TimeZone.REGIONS: self.tz_tuples = get_tz_info() elif self.screen == TimeZone.LOCATIONS: self.tz_tuples = get_tz_info(continent) else: self.tz_tuples = get_tz_info(continent, country_code) # get name to display. First choice is localized name, then # descriptive name, then plain name LOGGER.debug("number of timezones=%i", len(self.tz_tuples)) for item in self.tz_tuples: if item[2]: LOGGER.debug("tz2 = %s", item[2]) self.tz_list.append(item[2]) elif item[1]: LOGGER.debug("tz1 = %s", item[1]) self.tz_list.append(item[1]) else: LOGGER.debug("tz0 = %s", item[0]) self.tz_list.append(item[0]) return self.tz_list def on_change_screen(self): '''Save the chosen timezone's index and name when leaving the screen''' self.cur_timezone_idx = self.scroll_region.active_object idx = self.cur_timezone_idx self.last_timezone_parent = self.cur_timezone_parent if self.screen == TimeZone.REGIONS: if (self.scroll_region.get_active_object().data_obj == SystemInfo.UTC): self.sys_info.tz_region_idx = 0 self.sys_info.tz_region = SystemInfo.UTC self.sys_info.tz_country = SystemInfo.UTC self.sys_info.tz_timezone = SystemInfo.UTC self.sys_info.tz_display_name = TimeZone.UTC_TEXT else: self.sys_info.tz_region_idx = idx self.sys_info.tz_region = self.tz_tuples[idx - 1][0] LOGGER.debug("on_change_screen sys_info.tz_region: %s", self.sys_info.tz_region) elif self.screen == TimeZone.LOCATIONS: self.sys_info.tz_country_idx = idx self.sys_info.tz_country = self.tz_tuples[idx][0] self.last_continent = self.cur_continent LOGGER.debug("on_change_screen sys_info.tz_country: %s", self.sys_info.tz_country) LOGGER.debug("on_change_screen sys_info.tz_country_idx: %s", self.sys_info.tz_country_idx) else: self.sys_info.tz_timezone_idx = idx self.sys_info.tz_timezone = self.tz_tuples[idx][0] selected_tz = self.scroll_region.get_active_object().data_obj self.sys_info.tz_display_name = selected_tz self.last_country = self.cur_country self.cur_timezone_idx = self.scroll_region.active_object LOGGER.debug("on_change_screen self.sys_info.tz_timezone: %s", self.sys_info.tz_timezone) LOGGER.debug("on_change_screen self.sys_info.tz_timezone_idx:%s", self.sys_info.tz_timezone_idx)
def _show(self): '''Create the list of time zones''' LOGGER.debug("self.screen %s", self.screen) sc_profile = solaris_install.sysconfig.profile.from_engine() if sc_profile.system is None: sc_profile.system = SystemInfo() self.sys_info = sc_profile.system self.cur_country = self.sys_info.tz_country self.cur_continent = self.sys_info.tz_region if self.cur_continent == SystemInfo.UTC and self.screen != "regions": raise SkipException self.center_win.border_size = TimeZone.BORDER_WIDTH if self.screen == TimeZone.LOCATIONS: self.cur_timezone_parent = self.cur_continent elif self.screen == TimeZone.TIMEZONE: self.cur_timezone_parent = self.cur_country LOGGER.debug("cur_continent %s, cur_country %s", self.cur_continent, self.cur_country) y_loc = 1 y_loc += self.center_win.add_paragraph(self.intro, y_loc) y_loc += 1 menu_item_max_width = self.win_size_x - TimeZone.SCROLL_SIZE self.center_win.add_text(self.title, y_loc, TimeZone.SCROLL_SIZE) y_loc += 1 self.center_win.window.hline(y_loc, 3, curses.ACS_HLINE, 40) y_loc += 1 tz_list = self.get_timezones(self.cur_continent, self.cur_country) area = WindowArea(x_loc=0, y_loc=y_loc, scrollable_lines=len(tz_list) + 1) area.lines = self.win_size_y - (y_loc + 1) area.columns = self.win_size_x LOGGER.debug("area.lines=%s, area.columns=%s", area.lines, area.columns) self.scroll_region = ScrollWindow(area, window=self.center_win) utc = 0 if self.screen == TimeZone.REGIONS: utc_area = WindowArea(1, len(TimeZone.UTC_TEXT) + 1, 0, TimeZone.SCROLL_SIZE) utc_item = ListItem(utc_area, window=self.scroll_region, text=TimeZone.UTC_TEXT, data_obj=SystemInfo.UTC) utc = 1 # add the entries to the screen for idx, timezone in enumerate(tz_list): LOGGER.log(LOG_LEVEL_INPUT, "tz idx = %i name= %s", idx, tz_list[idx]) hilite = min(menu_item_max_width, len(timezone) + 1) win_area = WindowArea(1, hilite, idx + utc, TimeZone.SCROLL_SIZE) list_item = ListItem(win_area, window=self.scroll_region, text=timezone, data_obj=timezone) y_loc += 1 self.main_win.do_update() self.center_win.activate_object(self.scroll_region) LOGGER.debug("self.cur_timezone_idx=%s", self.cur_timezone_idx) self.scroll_region.activate_object_force(self.cur_timezone_idx, force_to_top=True)
class DiskWindow(InnerWindow): '''Display and edit disk information, including partitions and slices''' STATIC_PARTITION_HEADERS = [(12, _("Primary"), _("Logical")), (10, _(" Size(GB)"), _(" Size(GB)"))] EDIT_PARTITION_HEADERS = [(13, _("Primary"), _("Logical")), (10, _(" Size(GB)"), _(" Size(GB)")), (7, _(" Avail"), _(" Avail"))] STATIC_SLICE_HEADERS = [(13, _("Slice"), _("Slice")), (2, "#", "#"), (10, _(" Size(GB)"), _(" Size(GB)"))] EDIT_SLICE_HEADERS = [(13, _("Slice"), _("Slice")), (2, "#", "#"), (10, _(" Size(GB)"), _(" Size(GB)")), (7, _(" Avail"), _(" Avail"))] ADD_KEYS = {curses.KEY_LEFT: no_action, curses.KEY_RIGHT: no_action} DEAD_ZONE = 3 SCROLL_PAD = 2 MIN_SIZE = None REC_SIZE = None SIZE_PRECISION = Size(UI_PRECISION).get(Size.gb_units) DESTROYED_MARK = EditField.ASTERISK_CHAR def __init__(self, area, disk_info, editable=False, error_win=None, target_controller=None, **kwargs): '''See also InnerWindow.__init__ disk_info (required) - Either a Disk or Partition object containing the data to be represented. If a Partition objects is provided, it will be used for displaying slice data within that partition. If Disk has partition(s), those are displayed. If not, but it has slices, then those are displayed. If neither partition data nor slice data are available, a ValueError is raised. headers (required) - List of tuples to populate the header of this window with. The first item in each tuple should be the width of the header, the second item should be the left side header. editable (optional) - If True, the window will be created such that data is editable. target_controller(optional) - Target controller ''' global LOGGER LOGGER = logging.getLogger(INSTALL_LOGGER_NAME) self.headers = None self.orig_ext_part_field = None self.orig_logicals_active = False self.ext_part_field = None self.error_win = error_win self.editable = editable self.win_width = None self.left_win = None self.right_win = None self.list_area = None self.edit_area = None super(DiskWindow, self).__init__(area, add_obj=editable, **kwargs) self.left_header_string = None self.right_header_string = None self._orig_data = None self.disk_info = None self.has_partition_data = False self.key_dict[curses.KEY_LEFT] = self.on_arrow_key self.key_dict[curses.KEY_RIGHT] = self.on_arrow_key if self.editable: self.key_dict[curses.KEY_F5] = self.change_type self.tc = target_controller self._ui_obj = None self.ui_obj = disk_info self.set_disk_info(ui_obj=self.ui_obj) LOGGER.debug(self.ui_obj) if platform.processor() == "sparc": self.is_x86 = False else: self.is_x86 = True @property def ui_obj(self): return self._ui_obj @ui_obj.setter def ui_obj(self, part): ''' create and set the value for ui_obj depending on type ''' if isinstance(part, Disk): self._ui_obj = UIDisk(self.tc, parent=None, doc_obj=part) elif isinstance(part, Partition): self._ui_obj = UIPartition(self.tc, parent=None, doc_obj=part) else: # Must be a either a Disk or Partition. It's an error to be here raise RuntimeError("disk_info object is invalid") def _init_win(self, window): '''Require at least 70 columns and 6 lines to fit current needs for display of partitions and slices. Builds two inner ScrollWindows for displaying/editing the data. ''' if self.area.columns < 70: raise ValueError("Insufficient space - area.columns < 70") if self.area.lines < 6: raise ValueError("Insufficient space - area.lines < 6") self.win_width = (self.area.columns - DiskWindow.DEAD_ZONE + DiskWindow.SCROLL_PAD) / 2 super(DiskWindow, self)._init_win(window) win_area = WindowArea(self.area.lines - 1, self.win_width, 2, 0) win_area.scrollable_lines = self.area.lines - 2 self.left_win = ScrollWindow(win_area, window=self, add_obj=False) self.left_win.color = None self.left_win.highlight_color = None win_area.x_loc = self.win_width + DiskWindow.DEAD_ZONE win_area.scrollable_lines = 2 * MAX_EXT_PARTS self.right_win = ScrollWindow(win_area, window=self, add_obj=False) self.right_win.color = None self.right_win.highlight_color = None def set_disk_info(self, ui_obj=None, disk_info=None, no_part_ok=False): '''Set up this DiskWindow to represent disk_info''' if ui_obj is not None: disk_info = ui_obj.doc_obj elif disk_info is not None: self.ui_obj = disk_info else: # Should never be this case raise RuntimeError("Unable to find ui_obj or disk_info") part_list = disk_info.get_children(class_type=Partition) if part_list: self.has_partition_data = True else: slice_list = disk_info.get_children(class_type=Slice) if slice_list: self.has_partition_data = False else: # No partitions and no slices if no_part_ok: if self.is_x86: self.has_partition_data = True else: self.has_partition_data = False else: return if self.has_partition_data: if self.editable: self.headers = DiskWindow.EDIT_PARTITION_HEADERS self.list_area = WindowArea(1, self.headers[0][0] + self.headers[1][0], 0, DiskWindow.SCROLL_PAD) self.edit_area = WindowArea(1, self.headers[1][0], 0, self.headers[0][0]) else: self.headers = DiskWindow.STATIC_PARTITION_HEADERS else: if self.editable: self.headers = DiskWindow.EDIT_SLICE_HEADERS self.list_area = WindowArea(1, self.headers[0][0] + self.headers[1][0] + self.headers[2][0], 0, DiskWindow.SCROLL_PAD) self.edit_area = WindowArea(1, self.headers[2][0], 0, self.headers[0][0] + self.headers[1][0]) else: self.headers = DiskWindow.STATIC_SLICE_HEADERS LOGGER.debug("have_partition: %s", self.has_partition_data) LOGGER.debug(self.ui_obj) self.ui_obj.add_unused_parts(no_part_ok=no_part_ok) self.left_win.clear() self.right_win.clear() self.window.erase() self.print_headers() if self.editable: self.active_object = None self.build_edit_fields() self.right_win.bottom = max(0, len(self.right_win.all_objects) - self.right_win.area.lines) if self.has_partition_data: self.orig_ext_part_field = None for obj in self.left_win.objects: if (obj.data_obj.is_extended()): self.orig_ext_part_field = obj self.orig_logicals_active = True break else: self.print_data() def print_headers(self): '''Print the headers for the displayed data. header[0] - The width of this column. header[1] and header[2] are trimmed to this size header[1] - The internationalized text for the left window header[2] - The internationalized text for the right window ''' self.left_header_string = [] self.right_header_string = [] for header in self.headers: left_header_str = header[1] right_header_str = header[2] # Trim the header to fit in the column width, # splitting columns with at least 1 space # Pad with extra space(s) to align the columns left_header_str = fit_text_truncate(left_header_str, header[0] - 1, just="left") self.left_header_string.append(left_header_str) right_header_str = fit_text_truncate(right_header_str, header[0] - 1, just="left") self.right_header_string.append(right_header_str) self.left_header_string = " ".join(self.left_header_string) self.right_header_string = " ".join(self.right_header_string) LOGGER.debug(self.left_header_string) self.add_text(self.left_header_string, 0, DiskWindow.SCROLL_PAD) right_win_offset = (self.win_width + DiskWindow.DEAD_ZONE + DiskWindow.SCROLL_PAD) self.add_text(self.right_header_string, 0, right_win_offset) self.window.hline(1, DiskWindow.SCROLL_PAD, curses.ACS_HLINE, textwidth(self.left_header_string)) self.window.hline(1, right_win_offset, curses.ACS_HLINE, textwidth(self.right_header_string)) self.no_ut_refresh() def print_data(self): '''Print static (non-editable) data. Slices - fill the left side, then remaining slices on the right side. If for some reason not all slices fit, indicate how many more slices there area Partitions - Put standard partitions on the left, logical partitions on the right ''' part_index = 0 data = self.ui_obj.get_parts_in_use() if len(data) == 0: return # should never be this case if self.has_partition_data: max_parts = MAX_PRIMARY_PARTS else: max_parts = min(len(data), self.left_win.area.lines) win = self.left_win y_loc = 0 for next_data in data: LOGGER.debug("next_data: %s", next_data) if y_loc >= max_parts: if win is self.left_win: win = self.right_win y_loc = 0 max_parts = win.area.lines else: num_extra = len(data) - part_index if self.has_partition_data: more_parts_txt = _("%d more partitions") % num_extra else: more_parts_txt = _("%d more slices") % num_extra win.add_text(more_parts_txt, win.area.lines, 3) break x_loc = DiskWindow.SCROLL_PAD field = 0 win.add_text(next_data.get_description(), y_loc, x_loc, self.headers[field][0] - 1) x_loc += self.headers[field][0] field += 1 if not self.has_partition_data: win.add_text(str(next_data.name), y_loc, x_loc, self.headers[field][0] - 1) x_loc += self.headers[field][0] field += 1 win.add_text(locale.format("%*.1f", (self.headers[field][0] - 1, next_data.size.get(Size.gb_units))), y_loc, x_loc, self.headers[field][0] - 1) x_loc += self.headers[field][0] y_loc += 1 field += 1 part_index += 1 self.right_win.use_vert_scroll_bar = False self.no_ut_refresh() def build_edit_fields(self): '''Build subwindows for editing partition sizes For slices, fill the left side, then the right (right side scrolling as needed, though this shouldn't happen unless the number of slices on disk exceeds 8 for some reason) For partitions, fill the left side up to MAX_PRIMARY_PARTS, and place all logical partitions on the right. ''' data = self.ui_obj.get_parts_in_use() if self.has_partition_data: max_left_parts = MAX_PRIMARY_PARTS else: if len(data) == 0: return # should never be this case max_left_parts = min(len(data), self.left_win.area.lines) part_iter = iter(data) try: next_part = part_iter.next() self.objects.append(self.left_win) for y_loc in range(max_left_parts): self.list_area.y_loc = y_loc self.create_list_item(next_part, self.left_win, self.list_area) next_part = part_iter.next() self.objects.append(self.right_win) for y_loc in range(self.right_win.area.scrollable_lines): self.list_area.y_loc = y_loc self.create_list_item(next_part, self.right_win, self.list_area) next_part = part_iter.next() if len(data) > max_left_parts: self.right_win.use_vert_scroll_bar = True except StopIteration: if len(self.right_win.all_objects) <= self.right_win.area.lines: self.right_win.use_vert_scroll_bar = False self.right_win.no_ut_refresh() else: raise ValueError("Could not fit all partitions in DiskWindow") self.no_ut_refresh() def create_list_item(self, next_part, win, list_area): '''Add an entry for next_part (a Partition or Slice) to the DiskWindow ''' list_item = ListItem(list_area, window=win, data_obj=next_part) list_item.key_dict.update(DiskWindow.ADD_KEYS) edit_field = EditField(self.edit_area, window=list_item, numeric_pad=" ", validate=decimal_valid, on_exit=on_exit_edit, error_win=self.error_win, add_obj=False, data_obj=next_part) edit_field.right_justify = True edit_field.validate_kwargs["disk_win"] = self edit_field.on_exit_kwargs["disk_win"] = self edit_field.key_dict.update(DiskWindow.ADD_KEYS) self.update_part(part_field=list_item) return list_item def update_part(self, part_info=None, part_field=None): '''Sync changed partition data to the screen.''' if part_field is None: if part_info is None: raise ValueError("Must supply either part_info or part_field") part_field = self.find_part_field(part_info)[1] elif part_info is None: part_info = part_field.data_obj elif part_field.data_obj is not part_info: raise ValueError("part_field must be a ListItem associated with " "part_info") if not isinstance(part_field, ListItem): raise TypeError("part_field must be a ListItem associated with " "part_info") if self.has_partition_data: desc_text = part_info.get_description() else: desc_length = self.headers[0][0] - 1 desc_text = "%-*.*s %s" % (desc_length, desc_length, part_info.get_description(), part_info.name) part_field.set_text(desc_text) edit_field = part_field.all_objects[0] edit_field.set_text(locale.format("%.1f", part_info.size.get(Size.gb_units))) self.mark_if_destroyed(part_field) self._update_edit_field(part_info, part_field, edit_field) self.update_avail_space(part_info=part_info) if self.has_partition_data: if part_info.is_extended(): self.ext_part_field = part_field def _update_edit_field(self, part_info, part_field, edit_field): '''If the partition/slice is editable, add it to the .objects list. If it's also the part_field that's currently selected, then activate the edit field. ''' if part_info.editable(): part_field.objects = [edit_field] active_win = self.get_active_object() if active_win is not None: if active_win.get_active_object() is part_field: part_field.activate_object(edit_field) else: edit_field.make_inactive() part_field.objects = [] part_field.active_object = None def mark_if_destroyed(self, part_field): '''Determine if the partition/slice represented by part_field has changed such that its contents will be destroyed. ''' part_info = part_field.data_obj destroyed = part_info.modified() self.mark_destroyed(part_field, destroyed) def mark_destroyed(self, part_field, destroyed): '''If destroyed is True, add an asterisk indicating that the partition or slice's content will be destroyed during installation. Otherwise, clear the asterisk ''' y_loc = part_field.area.y_loc x_loc = part_field.area.x_loc - 1 if part_field in self.right_win.objects: win = self.right_win else: win = self.left_win if destroyed: win.window.addch(y_loc, x_loc, DiskWindow.DESTROYED_MARK, win.color_theme.inactive) else: win.window.addch(y_loc, x_loc, InnerWindow.BKGD_CHAR) def update_avail_space(self, part_number=None, part_info=None): '''Update the 'Avail' column for the specified slice or partition. If no number is given, all avail columns are updated ''' if part_number is None and part_info is None: self._update_all_avail_space() else: self._update_avail_space(part_number, part_info) def _update_all_avail_space(self): '''Update the 'Avail' column for all slices or partitions.''' idx = 0 for item in self.left_win.objects: self.update_avail_space(idx) idx += 1 for item in self.right_win.objects: self.update_avail_space(idx) idx += 1 y_loc = idx - len(self.left_win.objects) if self.has_partition_data: x_loc = self.headers[0][0] + self.headers[1][0] + 1 field = 2 else: x_loc = (self.headers[0][0] + self.headers[1][0] + self.headers[2][0] + 1) field = 3 if y_loc > 0: self.right_win.add_text(" " * self.headers[field][0], y_loc, x_loc) def _update_avail_space(self, part_number=None, part_info=None): '''Update the 'Avail' column for the specified slice or partition.''' if part_number is None: win, item = self.find_part_field(part_info) elif part_number < len(self.left_win.objects): win = self.left_win item = win.objects[part_number] else: win = self.right_win item = win.objects[part_number - len(self.left_win.objects)] if self.has_partition_data: x_loc = self.headers[0][0] + self.headers[1][0] + 1 field = 2 else: x_loc = (self.headers[0][0] + self.headers[1][0] + self.headers[2][0] + 1) field = 3 y_loc = item.area.y_loc part = item.data_obj max_space = part.get_max_size() max_space = locale.format("%*.1f", (self.headers[field][0], max_space.get(Size.gb_units))) win.add_text(max_space, y_loc, x_loc) def find_part_field(self, part_info): '''Given a PartitionInfo or SliceInfo object, find the associated ListItem. This search compares by reference, and will only succeed if you have a handle to the exact object referenced by the ListItem ''' for win in [self.left_win, self.right_win]: for item in win.objects: if item.data_obj is part_info: return win, item raise ValueError("Part field not found") def reset(self, dummy=None): '''Reset ui_obj to value found from Target Discovery. Meaningful only for editable DiskWindows ''' if not self.editable: return doc = InstallEngine.get_instance().doc # "reset" the desired target reset_obj = None if isinstance(self.ui_obj, UIDisk): reset_obj = (self.tc.reset_layout(disk=self.ui_obj.doc_obj))[0] else: # reset the partition by removing the modified Partition, and # resetting it with the partition found during target discovery. discovered_obj = self.ui_obj.discovered_doc_obj desired_disk = get_desired_target_disk(doc) desired_part = get_solaris_partition(doc) desired_disk.delete_partition(desired_part) part_copy = deepcopy(discovered_obj) desired_disk.insert_children(part_copy) # get the updated reference reset_obj = get_solaris_partition(doc) dump_doc("After doing reset") self.set_disk_info(disk_info=reset_obj) self.activate_solaris_data() def activate_solaris_data(self): '''Find the Solaris Partition / ZFS Root Pool Slice and activate it. ''' if self.editable: solaris_part = self.ui_obj.get_solaris_data() if solaris_part is None: LOGGER.debug("No Solaris data, activating default") self.activate_object() self.right_win.scroll(scroll_to_line=0) return disk_order = self.ui_obj.get_parts_in_use().index(solaris_part) LOGGER.debug("solaris disk at disk_order = %s", disk_order) self.activate_index(disk_order) def make_active(self): '''On activate, select the solaris partition or ZFS root pool, instead of defaulting to 0 ''' self.set_color(self.highlight_color) self.activate_solaris_data() def on_arrow_key(self, input_key): ''' On curses.KEY_LEFT: Move from the right win to the left win On curses.KEY_RIGHT: Move from the left to the right ''' if (input_key == curses.KEY_LEFT and self.get_active_object() is self.right_win and len(self.left_win.objects) > 0): active_object = self.right_win.get_active_object().area.y_loc if (active_object >= len(self.left_win.objects)): active_object = len(self.left_win.objects) - 1 self.activate_object(self.left_win) self.left_win.activate_object(active_object) return None elif (input_key == curses.KEY_RIGHT and self.get_active_object() is self.left_win and len(self.right_win.objects) > 0): active_line = (self.left_win.active_object + self.right_win.current_line[0]) active_object = None force_to_top = False for obj in self.right_win.objects: if obj.area.y_loc >= active_line: active_object = obj off_screen = (self.right_win.current_line[0] + self.right_win.area.lines) if active_object.area.y_loc > off_screen: force_to_top = True break if active_object is None: active_object = 0 self.left_win.activate_object(-1, loop=True) self.activate_object(self.right_win) self.right_win.activate_object_force(active_object, force_to_top=force_to_top) return None return input_key def no_ut_refresh(self, abs_y=None, abs_x=None): '''Refresh self, left win and right win explicitly''' super(DiskWindow, self).no_ut_refresh() self.left_win.no_ut_refresh(abs_y, abs_x) self.right_win.no_ut_refresh(abs_y, abs_x) def change_type(self, dummy): '''Cycle the type for the currently active object, and update its field ''' LOGGER.debug("changing type") part_field = self.get_active_object().get_active_object() part_info = part_field.data_obj part_order = self.ui_obj.get_parts_in_use().index(part_info) old_obj = part_info.discovered_doc_obj old_type = list() if old_obj is not None: if self.has_partition_data: old_type.append(old_obj.part_type) else: if old_obj.in_zpool is not None: old_type.append(old_obj.in_zpool) else: in_use = part_info.doc_obj.in_use if in_use is not None: if in_use['used_name']: old_type.append((in_use['used_name'])[0]) LOGGER.debug("extra type to cycle: %s", old_type) part_info.cycle_type(extra_type=old_type) self.set_disk_info(ui_obj=self.ui_obj, no_part_ok=True) self.activate_index(part_order) return None def create_extended(self, ext_part_field): '''If this is the original extended partition, restore the original logical partitions. Otherwise, create a single unused logical partition. ''' if not ext_part_field.data_obj.modified(): self.right_win.clear() self.orig_logicals_active = True logicals = deepcopy(self._orig_data.get_logicals()) self.disk_info.partitions.extend(logicals) for idx, logical in enumerate(logicals): self.list_area.y_loc = idx self.create_list_item(logical, self.right_win, self.list_area) if self.right_win not in self.objects: self.objects.append(self.right_win) self.right_win.activate_object_force(0, force_to_top=True) self.right_win.make_inactive() self.right_win.no_ut_refresh() else: # Leave old data be, create new Unused logical partition if self.right_win not in self.objects: self.objects.append(self.right_win) self.append_unused_logical() def activate_index(self, obj_index): '''Activate the object at the specified index ''' if obj_index < len(self.left_win.objects): LOGGER.debug("activating in left_win") self.left_win.activate_object(obj_index) self.activate_object(self.left_win) self.right_win.scroll(scroll_to_line=0) else: activate = obj_index - len(self.left_win.objects) LOGGER.debug('activating in right win') self.right_win.activate_object_force(activate, force_to_top=True) self.activate_object(self.right_win) left_active = self.left_win.get_active_object() if left_active is not None: left_active.make_inactive() def append_unused_logical(self): '''Adds a single Unused logical partition to the right window''' new_part = self.disk_info.append_unused_logical() self.list_area.y_loc = len(self.right_win.all_objects) bottom = self.list_area.y_loc - self.right_win.area.lines + 1 self.right_win.bottom = max(0, bottom) self.create_list_item(new_part, self.right_win, self.list_area) scroll = len(self.right_win.all_objects) > self.right_win.area.lines self.right_win.use_vert_scroll_bar = scroll self.right_win.no_ut_refresh()
def _show(self): '''Create a list of NICs to choose from. If more than 15 NICs are found, create a scrolling region to put them in ''' self.nic = solaris_install.sysconfig.profile.from_engine().nic if self.nic.type != NetworkInfo.MANUAL: raise SkipException if len(self.ether_nics) == 1: self.set_nic_in_profile(self.ether_nics[0]) raise SkipException if self.nic.nic_iface is None: selected_nic_name = "" else: selected_nic_name = NetworkInfo.get_nic_name(self.nic.nic_iface) y_loc = 1 y_loc += self.center_win.add_paragraph(NICSelect.PARAGRAPH, y_loc) selected_nic = 0 y_loc += 1 max_nics = min(NICSelect.MAX_NICS, self.center_win.area.lines - y_loc) if len(self.ether_nics) > max_nics: columns = self.win_size_x - NICSelect.LIST_OFFSET win_area = WindowArea(lines=max_nics, columns=columns, y_loc=y_loc, x_loc=NICSelect.LIST_OFFSET, scrollable_lines=len(self.ether_nics)) self.scroll_region = ScrollWindow(win_area, window=self.center_win) self.list_region = self.scroll_region y_loc = 0 else: self.scroll_region = None self.list_region = self.center_win for nic in self.ether_nics: self.list_area.y_loc = y_loc # # display list item in form of "NIC name (NIC device)" - # e.g. "net0 (bge0)" # If NIC device is not populated, display just NIC name. # list_item_text = NetworkInfo.get_nic_desc(nic) # list item width self.list_area.columns = len(list_item_text) + 1 list_item = ListItem(self.list_area, window=self.list_region, text=list_item_text, data_obj=nic) if NetworkInfo.get_nic_name(nic) == selected_nic_name: selected_nic = list_item y_loc += 1 self.main_win.do_update() if self.scroll_region: self.center_win.activate_object(self.scroll_region) self.scroll_region.activate_object_force(selected_nic, force_to_top=True) else: self.center_win.activate_object(selected_nic)
def test_scroll_down_up_arrow(self): '''Test to scroll down and up with arrow key ''' lines = 4 extra_lines = 9 scroll_win = ScrollWindow(WindowArea(lines, 70, 0, 0, scrollable_lines=lines + extra_lines), color_theme=ColorTheme(force_bw=True)) scroll_win.active_object = None self.assertTrue(scroll_win.at_top()) key = scroll_win.on_arrow_key(curses.KEY_DOWN) self.assertEqual(key, None) self.assertFalse(scroll_win.at_top()) key = scroll_win.on_arrow_key(curses.KEY_UP) self.assertEqual(key, None) self.assertTrue(scroll_win.at_top()) key = scroll_win.on_arrow_key(curses.KEY_UP) self.assertEqual(key, curses.KEY_UP) self.assertTrue(scroll_win.at_top()) scroll_win.scroll(extra_lines - 2) self.assertFalse(scroll_win.at_bottom()) scroll_win.on_arrow_key(curses.KEY_DOWN) self.assertTrue(scroll_win.at_bottom()) scroll_win.scroll(-(extra_lines - 2)) self.assertFalse(scroll_win.at_top()) scroll_win.on_arrow_key(curses.KEY_UP) self.assertTrue(scroll_win.at_top())
def test_scroll_right_left_arrow(self): '''Test to scroll right and left with arrow key ''' cols = 3 extra_cols = 5 scroll_win = ScrollWindow(WindowArea(10, cols, 0, 0, scrollable_columns=cols+extra_cols), color_theme=ColorTheme(force_bw=True)) scroll_win.active_object = None self.assertTrue(scroll_win.at_left()) key = scroll_win.on_arrow_key(curses.KEY_RIGHT) self.assertEqual(key, None) self.assertFalse(scroll_win.at_left()) key = scroll_win.on_arrow_key(curses.KEY_LEFT) self.assertEqual(key, None) self.assertTrue(scroll_win.at_left()) key = scroll_win.on_arrow_key(curses.KEY_LEFT) self.assertEqual(key, curses.KEY_LEFT) self.assertTrue(scroll_win.at_left()) scroll_win.scroll(columns=extra_cols-2) self.assertFalse(scroll_win.at_left()) self.assertFalse(scroll_win.at_right()) scroll_win.on_arrow_key(curses.KEY_RIGHT) self.assertTrue(scroll_win.at_right()) scroll_win.scroll(columns=-(extra_cols-2)) self.assertFalse(scroll_win.at_left()) self.assertFalse(scroll_win.at_right()) scroll_win.on_arrow_key(curses.KEY_LEFT) self.assertTrue(scroll_win.at_left())
def test_scroll_down_up_arrow(self): '''Test to scroll down and up with arrow key ''' lines = 4 extra_lines = 9 scroll_win = ScrollWindow(WindowArea(lines, 70, 0, 0, scrollable_lines=lines + extra_lines), color_theme=ColorTheme(force_bw=True)) scroll_win.active_object = None self.assertTrue(scroll_win.at_top()) key = scroll_win.on_arrow_key(curses.KEY_DOWN) self.assertEqual(key, None) self.assertFalse(scroll_win.at_top()) key = scroll_win.on_arrow_key(curses.KEY_UP) self.assertEqual(key, None) self.assertTrue(scroll_win.at_top()) key = scroll_win.on_arrow_key(curses.KEY_UP) self.assertEqual(key, curses.KEY_UP) self.assertTrue(scroll_win.at_top()) scroll_win.scroll(extra_lines-2) self.assertFalse(scroll_win.at_bottom()) scroll_win.on_arrow_key(curses.KEY_DOWN) self.assertTrue(scroll_win.at_bottom()) scroll_win.scroll(-(extra_lines-2)) self.assertFalse(scroll_win.at_top()) scroll_win.on_arrow_key(curses.KEY_UP) self.assertTrue(scroll_win.at_top())
def _show(self): '''Create a list of disks to choose from and create the window for displaying the partition/slice information from the selected disk ''' self.wait_for_disks() discovered_target = self.doc.persistent.get_first_child( \ name=Target.DISCOVERED) LOGGER.debug(discovered_target) if discovered_target is None: self.center_win.add_paragraph(DiskScreen.NO_DISKS, 1, 1, max_x=(self.win_size_x - 1)) return self.disks = discovered_target.get_children(class_type=Disk) if not self.disks: self.center_win.add_paragraph(DiskScreen.NO_TARGETS, 1, 1, max_x=(self.win_size_x - 1)) return if self._image_size is None: try: self._image_size = Size(str(get_image_size(LOGGER)) + \ Size.mb_units) LOGGER.debug("Image_size: %s", self._image_size) except: # Unable to get the image size for some reason, allow # the target controller to use it's default size. LOGGER.debug("Unable to get image size") self._image_size = FALLBACK_IMAGE_SIZE # initialize the target controller so the min/max size for # the installation can be calculated. Explicitly do not # want to select an initial disk at this time in case # none of the disks discovered is usable. The target controller # initialization needs to be done everytime we show the disk selection # screen so the desired target node in the DOC can be re-populated # with information from target discovery. self.tc.initialize(image_size=self._image_size, no_initial_disk=True) # Go through all the disks found and find ones that have # enough space for installation. At the same time, see if any # existing disk is the boot disk. If a boot disk is found, move # it to the front of the list num_usable_disks = 0 boot_disk = None for disk in self.disks: LOGGER.debug("size: %s, min: %s" % \ (disk.disk_prop.dev_size, self.minimum_size)) if disk.disk_prop.dev_size >= self.minimum_size: if disk.is_boot_disk(): boot_disk = disk num_usable_disks += 1 if boot_disk is not None: self.disks.remove(boot_disk) self.disks.insert(0, boot_disk) if num_usable_disks == 0: self.center_win.add_paragraph(DiskScreen.NO_DISKS, 1, 1, max_x=(self.win_size_x - 1)) return self.main_win.reset_actions() self.main_win.show_actions() y_loc = 1 self.center_win.add_text(DiskScreen.PARAGRAPH, y_loc, 1) y_loc += 1 self.center_win.add_text(self.size_line, y_loc, 1) y_loc += 2 self.center_win.add_text(self.disk_header_text, y_loc, 1) y_loc += 1 self.center_win.window.hline(y_loc, self.center_win.border_size[1] + 1, curses.ACS_HLINE, textwidth(self.disk_header_text)) y_loc += 1 disk_win_area = WindowArea(4, textwidth(self.disk_header_text) + 2, y_loc, 0) disk_win_area.scrollable_lines = len(self.disks) + 1 self.disk_win = ScrollWindow(disk_win_area, window=self.center_win) disk_item_area = WindowArea(1, disk_win_area.columns - 2, 0, 1) disk_index = 0 len_type = DiskScreen.DISK_HEADERS[0][0] - 1 len_size = DiskScreen.DISK_HEADERS[1][0] - 1 len_boot = DiskScreen.DISK_HEADERS[2][0] - 1 len_dev = DiskScreen.DISK_HEADERS[3][0] - 1 len_mftr = DiskScreen.DISK_HEADERS[4][0] - 1 for disk in self.disks: disk_text_fields = [] if disk.disk_prop is None or disk.disk_prop.dev_type is None: continue type_field = disk.disk_prop.dev_type[:len_type] type_field = ljust_columns(type_field, len_type) disk_text_fields.append(type_field) disk_size = disk.disk_prop.dev_size.get(Size.gb_units) size_field = locale.format("%*.1f", (len_size, disk_size)) disk_text_fields.append(size_field) if disk.is_boot_disk(): bootable_field = "+".center(len_boot) else: bootable_field = " " * (len_boot) disk_text_fields.append(bootable_field) device_field = disk.ctd[:len_dev] device_field = ljust_columns(device_field, len_dev) disk_text_fields.append(device_field) vendor = disk.disk_prop.dev_vendor if vendor is not None: mftr_field = vendor[:len_mftr] mftr_field = ljust_columns(mftr_field, len_mftr) else: mftr_field = " " * len_mftr disk_text_fields.append(mftr_field) selectable = True if disk.disk_prop.dev_size < self.minimum_size: note_field = self.too_small_text selectable = False elif disk_size > Size(MAX_VTOC).get(Size.gb_units): note_field = self.too_big_warn else: note_field = "" disk_text_fields.append(note_field) disk_text = " ".join(disk_text_fields) disk_item_area.y_loc = disk_index disk_list_item = ListItem(disk_item_area, window=self.disk_win, text=disk_text, add_obj=selectable) disk_list_item.on_make_active = on_activate disk_list_item.on_make_active_kwargs["disk"] = disk disk_list_item.on_make_active_kwargs["disk_select"] = self disk_index += 1 self.disk_win.no_ut_refresh() y_loc += 7 disk_detail_area = WindowArea(6, 70, y_loc, 1) self.disk_detail = DiskWindow(disk_detail_area, self.disks[0], target_controller=self.tc, window=self.center_win) self.main_win.do_update() self.center_win.activate_object(self.disk_win) self.disk_win.activate_object(self.selected_disk_index)