def __init__(self, num_ch, file_name, sensorLoc, sensorSys, sensor_id, sensor_key, center_freq, bandwidth, meas_duration, atten, samp_rate, avoid_LO):
gr.sync_block.__init__(self,
name="jsonfile_sink",
in_sig=[(bytes, num_ch)],
out_sig=None)
# Establish ssl socket connection to server
self.num_ch = num_ch
# Open file for output stream
self.file_name = file_name
self.f = open(self.file_name, 'wb')
self.srvr = blocks.file_descriptor_sink(self.num_ch * gr.sizeof_char, self.f.fileno())
self.sensorLoc = sensorLoc
self.sensorSys = sensorSys
self.sensor_id = sensor_id
self.sensor_key = sensor_key
self.center_freq = center_freq
self.bandwidth = bandwidth
self.meas_duration = meas_duration
self.atten = atten
self.samp_rate = samp_rate
self.avoid = avoid_LO
print ("Sensor ID: ", self.sensor_id)
# Send location and system info to server
loc_msg = self.read_json_from_file(self.sensorLoc)
sys_msg = self.read_json_from_file(self.sensorSys)
ts = long(round(getLocalUtcTimeStamp()))
print 'Serial no.', self.sensor_id
loc_msg['t'] = ts
loc_msg['SensorID'] = self.sensor_id
sys_msg['t'] = ts
sys_msg['SensorID'] = self.sensor_id
self.post_msg(loc_msg)
self.post_msg(sys_msg)
# Form data header
ts = long(round(getLocalUtcTimeStamp()))
f_start = self.center_freq - self.bandwidth / 2.0
if self.avoid:
#self.center_freq = self.center_freq + self.samp_rate/4.0
#print "Avoiding LO...\nShifting center Frequency to", self.center_freq
f_start = (self.center_freq - self.samp_rate/4) - self.bandwidth/2.0
f_stop = f_start + self.bandwidth
if self.avoid:
print "Avoiding LO, frequencies are shifted to: [",f_start/1e6, "MHz-",f_stop/1e6,"MHz ]"
mpar = Struct(fStart=f_start, fStop=f_stop, n=self.num_ch, td=-1, tm=self.meas_duration, Det='Average', Atten=self.atten)
# Need to add a field for overflow indicator
data_hdr = Struct(Ver='1.0.12', Type='Data', SensorID=self.sensor_id, SensorKey=self.sensor_key, t=ts, Sys2Detect='LTE', Sensitivity='Low', mType='FFT-Power', t1=ts, a=1, nM=-1, Ta=-1, OL='NaN', wnI=-77.0, Comment='Using hard-coded (not detected) system noise power for wnI', Processed='False', DataType = 'Binary - int8', ByteOrder='N/A', Compression='None', mPar=mpar)
self.post_msg(data_hdr)
self.f.flush()
date_str = formatTimeStampLong(ts, loc_msg['TimeZone'])
print date_str, "fc =", self.center_freq/1e6, "MHz. Writing data to file", self.file_name
def main_loop(tb):
if not tb.set_freq(tb.center_freq):
print "Failed to set frequency to", tb.center_freq
sys.exit(1)
print "Set frequency to", tb.center_freq/1e6, "MHz\n"
time.sleep(0.25)
sensor_id = "HackRF"
# Establish ssl socket connection to server
r = requests.post('https://'+tb.dest_host+':8443/sensordata/getStreamingPort/'+sensor_id, verify=False)
print 'server response:', r.text
response = r.json()
print 'socket port =', response['port']
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
tb.s = s = ssl.wrap_socket(sock)#, ca_certs='dummy.crt', cert_reqs=ssl.CERT_NONE)
s.connect((tb.dest_host, response['port']))
tb.set_sock(s)
# Send location and system info to server
loc_msg = tb.read_json_from_file('sensor.loc')
sys_msg = tb.read_json_from_file('sensor.sys')
ts = long(round(getLocalUtcTimeStamp()))
sensor_key = sys_msg['SensorKey']
print 'Sensor Key', sensor_key
#print 'Serial no.', sensor_id
loc_msg['t'] = ts
loc_msg['SensorID'] = sensor_id
sys_msg['t'] = ts
sys_msg['SensorID'] = sensor_id
tb.send_obj(loc_msg)
tb.send_obj(sys_msg)
# Form data header
ts = long(round(getLocalUtcTimeStamp()))
f_start = tb.center_freq - tb.bandwidth/2.0
if tb.avoid_LO:
f_start = (tb.center_freq - tb.samp_rate/4) - tb.bandwidth/2.0
f_stop = f_start + tb.bandwidth
if tb.avoid_LO:
print "Avoiding LO, frequencies are shifted to: [",f_start/1e6, "MHz-",f_stop/1e6,"MHz ]"
mpar = Struct(fStart=f_start, fStop=f_stop, n=tb.num_ch, td=-1, tm=tb.meas_duration, Det='Average', Atten=tb.atten)
# Need to add a field for overflow indicator
data = Struct(Ver='1.0.12', Type='Data', SensorID='HackRF', SensorKey='12345', t=ts, Sys2Detect='LTE', Sensitivity='Low', mType='FFT-Power', t1=ts, a=1, nM=-1, Ta=-1, OL='NaN', wnI=-77.0, Comment='Using hard-coded (not detected) system noise power for wnI', Processed='False', DataType = 'Binary - int8', ByteOrder='N/A', Compression='None', mPar=mpar)
tb.send_obj(data)
date_str = formatTimeStampLong(ts, loc_msg['TimeZone'])
print date_str, "fc =", tb.center_freq/1e6, "MHz. Sending data to", tb.dest_host
# Start flow graph
tb.start()
tb.wait()
tb.s.close()
print 'Closed socket'
def main_loop(tb):
sensor_id = "TestSensor"
r = requests.post('https://' + tb.dest_host +
'/sensordata/getStreamingPort/' + sensor_id,
verify=False)
print 'server response:', r.text
response = r.json()
print 'socket port =', response['port']
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
tb.s = s = ssl.wrap_socket(sock)
s.connect((tb.dest_host, response['port']))
tb.set_sock(s)
# Send location and system info to server
loc_msg = tb.read_json_from_file('sensor.loc')
loc_msg["SensorID"] = sensor_id
sys_msg = tb.read_json_from_file('sensor.sys')
sys_msg["SensorID"] = sensor_id
ts = long(round(getLocalUtcTimeStamp()))
print 'Serial no.', sensor_id
loc_msg['t'] = ts
loc_msg['SensorID'] = sensor_id
sys_msg['t'] = ts
sys_msg['SensorID'] = sensor_id
tb.send_obj(loc_msg)
tb.send_obj(sys_msg)
# Form data header
ts = long(round(getLocalUtcTimeStamp()))
f_start = tb.center_freq - tb.bandwidth / 2.0
f_stop = f_start + tb.bandwidth
# Note -- dummy atten
mpar = Struct(fStart=f_start,
fStop=f_stop,
n=tb.num_ch,
td=-1,
tm=tb.meas_duration,
Det='Average' if tb.det_type == 'avg' else 'Peak',
Atten=tb.atten)
# Need to add a field for overflow indicator
data = Struct(Ver='1.0.12', Type='Data', SensorID=sensor_id, SensorKey='NaN', t=ts, Sys2Detect='LTE', \
Sensitivity='Low', mType='FFT-Power', t1=ts, a=1, nM=-1, Ta=-1, OL='NaN', wnI=-77.0, \
Comment='Using hard-coded (not detected) system noise power for wnI', \
Processed='False', DataType = 'Binary - int8', ByteOrder='N/A', Compression='None', mPar=mpar)
tb.send_obj(data)
date_str = formatTimeStampLong(ts, loc_msg['TimeZone'])
print date_str, "fc =", tb.center_freq / 1e6, "MHz. Sending data to", tb.dest_host
# Start flow graph
tb.start()
tb.wait()
tb.s.close()
print 'Closed socket'
def __init__(self, num_ch, dest_host, sensorLoc, sensorSys, sensor_id, sensor_key, center_freq, bandwidth, meas_duration, atten):
gr.sync_block.__init__(self,
name="sslsocket_sink",
in_sig=[(bytes, num_ch)],
out_sig=None)
# Establish ssl socket connection to server
self.num_ch = num_ch
self.dest_host = dest_host
self.sensorLoc = sensorLoc
self.sensorSys = sensorSys
self.sensor_id = sensor_id
self.sensor_key = sensor_key
self.center_freq = center_freq
self.bandwidth = bandwidth
self.meas_duration = meas_duration
self.atten = atten
r = requests.post('https://'+self.dest_host+':8443/sensordata/getStreamingPort/'+self.sensor_id, verify=False)
print 'server response:', r.text
response = r.json()
print 'socket port =', response['port']
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
self.sock = ssl.wrap_socket(sock, cert_reqs=ssl.CERT_NONE)
self.sock.connect((self.dest_host, response['port']))
print ("Sensor ID: ", self.sensor_id)
# Send location and system info to server
loc_msg = self.read_json_from_file(self.sensorLoc)
sys_msg = self.read_json_from_file(self.sensorSys)
ts = long(round(getLocalUtcTimeStamp()))
print 'Serial no.', self.sensor_id
loc_msg['t'] = ts
loc_msg['SensorID'] = self.sensor_id
sys_msg['t'] = ts
sys_msg['SensorID'] = self.sensor_id
self.send_obj(loc_msg)
self.send_obj(sys_msg)
# Form data header
ts = long(round(getLocalUtcTimeStamp()))
f_start = self.center_freq - self.bandwidth / 2.0
f_stop = f_start + self.bandwidth
mpar = Struct(fStart=f_start, fStop=f_stop, n=self.num_ch, td=-1, tm=self.meas_duration, Det='Average', Atten=self.atten)
# Need to add a field for overflow indicator
data = Struct(Ver='1.0.12', Type='Data', SensorID=self.sensor_id, SensorKey=self.sensor_key, t=ts, Sys2Detect='LTE', Sensitivity='Low', mType='FFT-Power', t1=ts, a=1, nM=-1, Ta=-1, OL='NaN', wnI=-77.0, Comment='Using hard-coded (not detected) system noise power for wnI', Processed='False', DataType = 'Binary - int8', ByteOrder='N/A', Compression='None', mPar=mpar)
self.send_obj(data)
date_str = formatTimeStampLong(ts, loc_msg['TimeZone'])
print date_str, "fc =", self.center_freq/1e6, "MHz. Sending data to", self.dest_host
def main_loop(tb):
if not tb.set_freq(tb.center_freq):
print "Failed to set frequency to", tb.center_freq
sys.exit(1)
print "Set frequency to", tb.center_freq/1e6, "MHz"
time.sleep(0.25)
# Establish connection to server
r = requests.post('http://'+tb.dest_host+':8000/sensordata/getStreamingPort')
response = r.json()
print 'socket port =', response['port']
tb.s = s = jsocket.JsonClient(address=tb.dest_host, port=response['port'])
s.connect()
tb.set_fd(s.conn.fileno())
# Send location and system info to server
loc_msg = tb.read_json_from_file('sensor.loc')
sys_msg = tb.read_json_from_file('sensor.sys')
ts = long(round(getLocalUtcTimeStamp()))
sensor_id = tb.u.get_usrp_info()['rx_serial']
print 'Serial no.', sensor_id
loc_msg['t'] = ts
loc_msg['SensorID'] = sensor_id
sys_msg['t'] = ts
sys_msg['SensorID'] = sensor_id
s.send_obj(loc_msg)
s.send_obj(sys_msg)
# Form data header
ts = long(round(getLocalUtcTimeStamp()))
f_start = tb.center_freq - tb.bandwidth / 2.0
f_stop = f_start + tb.bandwidth
mpar = Struct(fStart=f_start, fStop=f_stop, n=tb.num_ch, td=-1, tm=tb.meas_duration, Det='Average', Atten=tb.atten)
# Need to add a field for overflow indicator
data = Struct(Ver='1.0.12', Type='Data', SensorID=sensor_id, SensorKey='NaN', t=ts, Sys2Detect='LTE', Sensitivity='Low', mType='FFT-Power', t1=ts, a=1, nM=-1, Ta=-1, OL='NaN', wnI=-77.0, Comment='Using hard-coded (not detected) system noise power for wnI', Processed='False', DataType = 'Binary - int8', ByteOrder='N/A', Compression='None', mPar=mpar)
s.send_obj(data)
date_str = formatTimeStampLong(ts, loc_msg['TimeZone'])
print date_str, "fc =", tb.center_freq/1e6, "MHz. Sending data to", tb.dest_host
# Execute flow graph and wait for it to stop
tb.start()
tb.wait()
tb.s.close()
print 'Closed socket'
def testGetDayBoundaryOffset(self):
global tzId
t = timezone.getLocalUtcTimeStamp()
startOfToday = timezone.getDayBoundaryTimeStampFromUtcTimeStamp(
t, tzId)
self.assertTrue(t > startOfToday)
delta = t - startOfToday
now = datetime.datetime.now()
hourOffset = now.hour
minOffset = now.minute
secondOffset = now.second
newDelta = hourOffset * 60 * 60 + minOffset * 60 + secondOffset
self.assertTrue(abs(newDelta - delta) < 2)
def main_loop(tb):
tb.set_next_freq()
time.sleep(0.25)
# Send location and system info to server
loc_msg = tb.read_json_from_file('sensor.loc')
sys_msg = tb.read_json_from_file('sensor.sys')
ts = long(round(getLocalUtcTimeStamp()))
sensor_id = tb.u.get_usrp_info()['rx_serial']
loc_msg['t'] = ts
loc_msg['SensorID'] = sensor_id
sys_msg['t'] = ts
sys_msg['SensorID'] = sensor_id
tb.post_msg(loc_msg)
tb.post_msg(sys_msg)
data_file_path = '/tmp/temp.dat'
num_bands = len(tb.center_freq)
pause_duration = tb.acq_period / num_bands - tb.dwell_delay
n = 0
while 1:
# Form data header
ts = long(round(getLocalUtcTimeStamp()))
if n == 0:
t1s = ts
center_freq = tb.center_freq[tb.band_ind]
bandwidth = tb.bandwidth[tb.band_ind]
f_start = center_freq - bandwidth / 2.0
f_stop = f_start + bandwidth
mpar = Struct(fStart=f_start,
fStop=f_stop,
n=tb.num_ch,
td=tb.dwell_delay,
Det='Average',
Atten=tb.atten)
num_vectors_expected = int(tb.dwell_delay / tb.meas_duration)
# Need to add a field for overflow indicator
data_hdr = Struct(
Ver='1.0.12',
Type='Data',
SensorID=sensor_id,
SensorKey='NaN',
t=ts,
Sys2Detect='LTE',
Sensitivity='Low',
mType='FFT-Power',
t1=t1s,
a=n / num_bands + 1,
nM=num_vectors_expected,
Ta=tb.acq_period,
OL='NaN',
wnI=-77.0,
Comment=
'Using hard-coded (not detected) system noise power for wnI',
Processed='False',
DataType='Binary - int8',
ByteOrder='N/A',
Compression='None',
mPar=mpar)
date_str = formatTimeStampLong(ts, loc_msg['TimeZone'])
print date_str, "fc =", center_freq / 1e6, "MHz. Writing data to file..."
# Execute flow graph and wait for it to stop
f = open(data_file_path, 'wb')
tb.set_fd(f.fileno())
tb.set_bin2ch_map(tb.bin2ch_map[tb.band_ind])
tb.start()
tb.wait()
# Check the number of power vectors generated and pad if necessary
num_vectors_written = tb.stats.nitems_written(0)
print '\nNum output items:', num_vectors_written
if num_vectors_written != num_vectors_expected:
print 'Warning: Unexpected number of power vectors generated'
if num_vectors_written < num_vectors_expected:
pad_len = (num_vectors_expected -
num_vectors_written) * tb.num_ch
pad = array.array('b', [127] * pad_len)
f.write(pad.tostring())
f.close()
# Post data file
tb.post_data_msg(data_hdr, data_file_path)
# Tune to next frequency and pause
tb.set_next_freq()
print "Pause..."
time.sleep(
max(0, ts + tb.acq_period / num_bands - getLocalUtcTimeStamp()))
tb.head.reset()
n += 1
def main_loop(tb):
if not tb.set_freq(tb.center_freq):
print "Failed to set frequency to", tb.center_freq
sys.exit(1)
print "Set frequency to", tb.center_freq / 1e6, "MHz\n"
time.sleep(0.25)
sensor_id = "HackRF"
# Establish ssl socket connection to server
r = requests.post('https://' + tb.dest_host +
':8443/sensordata/getStreamingPort/' + sensor_id,
verify=False)
print 'server response:', r.text
response = r.json()
print 'socket port =', response['port']
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
tb.s = s = ssl.wrap_socket(
sock) #, ca_certs='dummy.crt', cert_reqs=ssl.CERT_NONE)
s.connect((tb.dest_host, response['port']))
tb.set_sock(s)
# Send location and system info to server
loc_msg = tb.read_json_from_file('sensor.loc')
sys_msg = tb.read_json_from_file('sensor.sys')
ts = long(round(getLocalUtcTimeStamp()))
sensor_key = sys_msg['SensorKey']
print 'Sensor Key', sensor_key
#print 'Serial no.', sensor_id
loc_msg['t'] = ts
loc_msg['SensorID'] = sensor_id
sys_msg['t'] = ts
sys_msg['SensorID'] = sensor_id
tb.send_obj(loc_msg)
tb.send_obj(sys_msg)
# Form data header
ts = long(round(getLocalUtcTimeStamp()))
f_start = tb.center_freq - tb.bandwidth / 2.0
if tb.avoid_LO:
f_start = (tb.center_freq - tb.samp_rate / 4) - tb.bandwidth / 2.0
f_stop = f_start + tb.bandwidth
if tb.avoid_LO:
print "Avoiding LO, frequencies are shifted to: [", f_start / 1e6, "MHz-", f_stop / 1e6, "MHz ]"
mpar = Struct(fStart=f_start,
fStop=f_stop,
n=tb.num_ch,
td=-1,
tm=tb.meas_duration,
Det='Average',
Atten=tb.atten)
# Need to add a field for overflow indicator
data = Struct(
Ver='1.0.12',
Type='Data',
SensorID='HackRF',
SensorKey='12345',
t=ts,
Sys2Detect='LTE',
Sensitivity='Low',
mType='FFT-Power',
t1=ts,
a=1,
nM=-1,
Ta=-1,
OL='NaN',
wnI=-77.0,
Comment='Using hard-coded (not detected) system noise power for wnI',
Processed='False',
DataType='Binary - int8',
ByteOrder='N/A',
Compression='None',
mPar=mpar)
tb.send_obj(data)
date_str = formatTimeStampLong(ts, loc_msg['TimeZone'])
print date_str, "fc =", tb.center_freq / 1e6, "MHz. Sending data to", tb.dest_host
# Start flow graph
tb.start()
tb.wait()
tb.s.close()
print 'Closed socket'
def __init__(self, num_ch, file_name, sensorLoc, sensorSys, sensor_id,
sensor_key, center_freq, bandwidth, meas_duration, atten,
samp_rate, avoid_LO):
gr.sync_block.__init__(self,
name="jsonfile_sink",
in_sig=[(bytes, num_ch)],
out_sig=None)
# Establish ssl socket connection to server
self.num_ch = num_ch
# Open file for output stream
self.file_name = file_name
self.f = open(self.file_name, 'wb')
self.srvr = blocks.file_descriptor_sink(self.num_ch * gr.sizeof_char,
self.f.fileno())
self.sensorLoc = sensorLoc
self.sensorSys = sensorSys
self.sensor_id = sensor_id
self.sensor_key = sensor_key
self.center_freq = center_freq
self.bandwidth = bandwidth
self.meas_duration = meas_duration
self.atten = atten
self.samp_rate = samp_rate
self.avoid = avoid_LO
print("Sensor ID: ", self.sensor_id)
# Send location and system info to server
loc_msg = self.read_json_from_file(self.sensorLoc)
sys_msg = self.read_json_from_file(self.sensorSys)
ts = long(round(getLocalUtcTimeStamp()))
print 'Serial no.', self.sensor_id
loc_msg['t'] = ts
loc_msg['SensorID'] = self.sensor_id
sys_msg['t'] = ts
sys_msg['SensorID'] = self.sensor_id
self.post_msg(loc_msg)
self.post_msg(sys_msg)
# Form data header
ts = long(round(getLocalUtcTimeStamp()))
f_start = self.center_freq - self.bandwidth / 2.0
if self.avoid:
#self.center_freq = self.center_freq + self.samp_rate/4.0
#print "Avoiding LO...\nShifting center Frequency to", self.center_freq
f_start = (self.center_freq -
self.samp_rate / 4) - self.bandwidth / 2.0
f_stop = f_start + self.bandwidth
if self.avoid:
print "Avoiding LO, frequencies are shifted to: [", f_start / 1e6, "MHz-", f_stop / 1e6, "MHz ]"
mpar = Struct(fStart=f_start,
fStop=f_stop,
n=self.num_ch,
td=-1,
tm=self.meas_duration,
Det='Average',
Atten=self.atten)
# Need to add a field for overflow indicator
data_hdr = Struct(
Ver='1.0.12',
Type='Data',
SensorID=self.sensor_id,
SensorKey=self.sensor_key,
t=ts,
Sys2Detect='LTE',
Sensitivity='Low',
mType='FFT-Power',
t1=ts,
a=1,
nM=-1,
Ta=-1,
OL='NaN',
wnI=-77.0,
Comment=
'Using hard-coded (not detected) system noise power for wnI',
Processed='False',
DataType='Binary - int8',
ByteOrder='N/A',
Compression='None',
mPar=mpar)
self.post_msg(data_hdr)
self.f.flush()
date_str = formatTimeStampLong(ts, loc_msg['TimeZone'])
print date_str, "fc =", self.center_freq / 1e6, "MHz. Writing data to file", self.file_name
def main_loop(tb):
if not tb.set_freq(tb.center_freq):
print "Failed to set frequency to", tb.center_freq
sys.exit(1)
print "Set frequency to", tb.center_freq / 1e6, "MHz"
time.sleep(0.25)
# Open file for output stream
f = open(tb.file_name, 'wb')
tb.set_fd(f.fileno())
# Write location and system info to file
loc_msg = tb.read_json_from_file('sensor.loc')
sys_msg = tb.read_json_from_file('sensor.sys')
ts = long(round(getLocalUtcTimeStamp()))
sensor_id = tb.u.get_usrp_info()['rx_serial']
print 'Serial no.', sensor_id
loc_msg['t'] = ts
loc_msg['SensorID'] = sensor_id
sys_msg['t'] = ts
sys_msg['SensorID'] = sensor_id
tb.post_msg(loc_msg, f)
tb.post_msg(sys_msg, f)
# Form data header
ts = long(round(getLocalUtcTimeStamp()))
f_start = tb.center_freq - tb.bandwidth / 2.0
f_stop = f_start + tb.bandwidth
mpar = Struct(fStart=f_start,
fStop=f_stop,
n=tb.num_ch,
td=-1,
tm=tb.meas_duration,
Det='Average',
Atten=tb.atten)
# Need to add a field for overflow indicator
data_hdr = Struct(
Ver='1.0.12',
Type='Data',
SensorID=sensor_id,
SensorKey='NaN',
t=ts,
Sys2Detect='LTE',
Sensitivity='Low',
mType='FFT-Power',
t1=ts,
a=1,
nM=-1,
Ta=-1,
OL='NaN',
wnI=-77.0,
Comment='Using hard-coded (not detected) system noise power for wnI',
Processed='False',
DataType='Binary - int8',
ByteOrder='N/A',
Compression='None',
mPar=mpar)
tb.post_msg(data_hdr, f)
f.flush()
date_str = formatTimeStampLong(ts, loc_msg['TimeZone'])
print date_str, "fc =", tb.center_freq / 1e6, "MHz. Writing data to file", tb.file_name
# Execute flow graph and wait for it to stop
tb.start()
tb.wait()
f.close()
tf = long(round(getLocalUtcTimeStamp()))
date_str = formatTimeStampLong(tf, loc_msg['TimeZone'])
print 'Closed file', date_str
def main_loop(tb):
tb.set_next_freq()
time.sleep(0.25)
# Send location and system info to server
loc_msg = tb.read_json_from_file('sensor.loc')
sys_msg = tb.read_json_from_file('sensor.sys')
ts = long(round(getLocalUtcTimeStamp()))
sensor_id = tb.u.get_usrp_info()['rx_serial']
loc_msg['t'] = ts
loc_msg['SensorID'] = sensor_id
sys_msg['t'] = ts
sys_msg['SensorID'] = sensor_id
tb.post_msg(loc_msg)
tb.post_msg(sys_msg)
data_file_path = '/tmp/temp.dat'
num_bands = len(tb.center_freq)
pause_duration = tb.acq_period / num_bands - tb.dwell_delay
n = 0
while 1:
# Form data header
ts = long(round(getLocalUtcTimeStamp()))
if n==0:
t1s = ts
center_freq = tb.center_freq[tb.band_ind]
bandwidth = tb.bandwidth[tb.band_ind]
f_start = center_freq - bandwidth / 2.0
f_stop = f_start + bandwidth
mpar = Struct(fStart=f_start, fStop=f_stop, n=tb.num_ch, td=tb.dwell_delay, Det='Average', Atten=tb.atten)
num_vectors_expected = int(tb.dwell_delay / tb.meas_duration)
# Need to add a field for overflow indicator
data_hdr = Struct(Ver='1.0.12', Type='Data', SensorID=sensor_id, SensorKey='NaN', t=ts, Sys2Detect='LTE', Sensitivity='Low', mType='FFT-Power', t1=t1s, a=n/num_bands+1, nM=num_vectors_expected, Ta=tb.acq_period, OL='NaN', wnI=-77.0, Comment='Using hard-coded (not detected) system noise power for wnI', Processed='False', DataType = 'Binary - int8', ByteOrder='N/A', Compression='None', mPar=mpar)
date_str = formatTimeStampLong(ts, loc_msg['TimeZone'])
print date_str, "fc =", center_freq/1e6, "MHz. Writing data to file..."
# Execute flow graph and wait for it to stop
f = open(data_file_path,'wb')
tb.set_fd(f.fileno())
tb.set_bin2ch_map(tb.bin2ch_map[tb.band_ind])
tb.start()
tb.wait()
# Check the number of power vectors generated and pad if necessary
num_vectors_written = tb.stats.nitems_written(0)
print '\nNum output items:', num_vectors_written
if num_vectors_written != num_vectors_expected:
print 'Warning: Unexpected number of power vectors generated'
if num_vectors_written < num_vectors_expected:
pad_len = (num_vectors_expected - num_vectors_written) * tb.num_ch
pad = array.array('b', [127]*pad_len)
f.write(pad.tostring())
f.close()
# Post data file
tb.post_data_msg(data_hdr, data_file_path)
# Tune to next frequency and pause
tb.set_next_freq()
print "Pause..."
time.sleep(max(0, ts + tb.acq_period / num_bands - getLocalUtcTimeStamp()))
tb.head.reset()
n += 1
def testGetLocalTimeFromUniversalTime(self):
utc = timezone.getLocalUtcTimeStamp()
localtime, tzName = timezone.getLocalTime(utc, tzId)
now = time.time()
self.assertTrue(abs(now - localtime) < 2)
def __init__(self, num_ch, dest_host, sensorLoc, sensorSys, sensor_id,
sensor_key, center_freq, bandwidth, meas_duration, atten):
gr.sync_block.__init__(self,
name="sslsocket_sink",
in_sig=[(bytes, num_ch)],
out_sig=None)
# Establish ssl socket connection to server
self.num_ch = num_ch
self.dest_host = dest_host
self.sensorLoc = sensorLoc
self.sensorSys = sensorSys
self.sensor_id = sensor_id
self.sensor_key = sensor_key
self.center_freq = center_freq
self.bandwidth = bandwidth
self.meas_duration = meas_duration
self.atten = atten
r = requests.post('https://' + self.dest_host +
':8443/sensordata/getStreamingPort/' +
self.sensor_id,
verify=False)
print 'server response:', r.text
response = r.json()
print 'socket port =', response['port']
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
self.sock = ssl.wrap_socket(sock, cert_reqs=ssl.CERT_NONE)
self.sock.connect((self.dest_host, response['port']))
print("Sensor ID: ", self.sensor_id)
# Send location and system info to server
loc_msg = self.read_json_from_file(self.sensorLoc)
sys_msg = self.read_json_from_file(self.sensorSys)
ts = long(round(getLocalUtcTimeStamp()))
print 'Serial no.', self.sensor_id
loc_msg['t'] = ts
loc_msg['SensorID'] = self.sensor_id
sys_msg['t'] = ts
sys_msg['SensorID'] = self.sensor_id
self.send_obj(loc_msg)
self.send_obj(sys_msg)
# Form data header
ts = long(round(getLocalUtcTimeStamp()))
f_start = self.center_freq - self.bandwidth / 2.0
f_stop = f_start + self.bandwidth
mpar = Struct(fStart=f_start,
fStop=f_stop,
n=self.num_ch,
td=-1,
tm=self.meas_duration,
Det='Average',
Atten=self.atten)
# Need to add a field for overflow indicator
data = Struct(
Ver='1.0.12',
Type='Data',
SensorID=self.sensor_id,
SensorKey=self.sensor_key,
t=ts,
Sys2Detect='LTE',
Sensitivity='Low',
mType='FFT-Power',
t1=ts,
a=1,
nM=-1,
Ta=-1,
OL='NaN',
wnI=-77.0,
Comment=
'Using hard-coded (not detected) system noise power for wnI',
Processed='False',
DataType='Binary - int8',
ByteOrder='N/A',
Compression='None',
mPar=mpar)
self.send_obj(data)
date_str = formatTimeStampLong(ts, loc_msg['TimeZone'])
print date_str, "fc =", self.center_freq / 1e6, "MHz. Sending data to", self.dest_host
