def try_bricklet(self, uid, device_identifier, position):
if device_identifier == 231 and "taskint" not in self.outputs:
self.device = BrickletLEDStrip(uid, self.controller.ipcon)
self.outputs["taskint"] = {
"name": "Task Intensity",
"type": "dimmer",
}
self.outputs["taskcol"] = {
"name": "Task Colour",
"type": "select",
}
self.device.set_chip_type(self.device.CHIP_TYPE_WS2811)
self.device.set_channel_mapping(self.device.CHANNEL_MAPPING_BRG)
print("Created LEDBrick Output")
def __init__(self):
# Attribute importiert
self.__UIDmaster = matrixProperties.UIDmaster # "6et15y"
self.__UIDbricklet = matrixProperties.UIDbricklet # "wVj"
self.__HOST = matrixProperties.HOST # "localhost"
self.__PORT = matrixProperties.PORT # 4223
self.__matrixIndexRed = matrixProperties.IndexRed # 0
self.__matrixIndexGreen = matrixProperties.IndexGreen # 1
self.__matrixIndexBlue = matrixProperties.IndexBlue # 2
self.__rows = matrixProperties.ROWS # 10
self.__columns = matrixProperties.COLUMNS # 20
self.__LEDnr = matrixProperties.LEDnr # Liste LED-Nummern 0 bis 199
self.__numLEDS = matrixProperties.NUM_LEDS # 16
self.__rgb = [[0 for i in range(self.__numLEDS)]
for i in range(3)] # RGB-Array
self.__image = matrixProperties.defaultImage # Default-Bild setzen
self.__imageIndexRed = 0
self.__imageIndexGreen = 1
self.__imageIndexBlue = 2
# Instanzvariablen
self.__light = True # Boolean: True / False
# Objekte
print("Instanz LEDmatrix wurde erstellt.")
self.__ipcon = IPConnection() # Create IP connection
self.__masterBrick = BrickMaster(self.__UIDmaster, self.__ipcon)
self.__brickletLEDstrip = BrickletLEDStrip(
self.__UIDbricklet, self.__ipcon) # Create device object
# Connect to brickd --> Verbindung Masterbrick? richtiger RGB-Kanal einstellen?
self.__ipcon.connect(self.__HOST, self.__PORT)
print("Verbindung zu brickd hergestellt.")
self.__brickletLEDstrip.set_frame_duration(
20) # Anzeigedauer Bild: 20ms ergibt 20 Bilder pro Sekunde
self.__brickletLEDstrip.set_channel_mapping(
self.__brickletLEDstrip.CHANNEL_MAPPING_RGB
) # CHANNEL_MAPPING_RGB = 6 -> Farbkanal definieren (RGB statt BGR)
# Callback starten
self.__brickletLEDstrip.register_callback(
self.__brickletLEDstrip.CALLBACK_FRAME_RENDERED,
lambda x: self.__loadPicture__())
print("Callback aktiviert.")
def cb_enumerate(uid, connected_uid, position, hardware_version,
firmware_version, device_identifier, enumeration_type):
print("UID: " + uid)
print("Enumeration Type: " + str(enumeration_type))
if enumeration_type == IPConnection.ENUMERATION_TYPE_DISCONNECTED:
print("")
return
print("Connected UID: " + connected_uid)
print("Position: " + position)
print("Hardware Version: " + str(hardware_version))
print("Firmware Version: " + str(firmware_version))
print("Device Identifier: " + str(device_identifier))
print("")
if device_identifier == LED_BRICKLET:
print(device_identifier, uid, ipcon)
led_bricklet = BrickletLEDStrip(uid, ipcon)
draw(led_bricklet, TEXT)
def __init__(self):
# Attribute importiert
self.__UIDmaster = matrixProperties.UIDmaster # "6et15y"
self.__UIDbricklet = matrixProperties.UIDbricklet # "wVj"
self.__HOST = matrixProperties.HOST # "localhost"
self.__PORT = matrixProperties.PORT # 4223
self.__matrixIndexRed = matrixProperties.IndexRed # 0
self.__matrixIndexGreen = matrixProperties.IndexGreen # 1
self.__matrixIndexBlue = matrixProperties.IndexBlue # 2
self.__rows = matrixProperties.ROWS # 10
self.__columns = matrixProperties.COLUMNS # 20
self.__LEDnr = matrixProperties.LEDnr # Liste LED-Nummern 0 bis 199
self.__numLEDS = matrixProperties.NUM_LEDS # 16
self.__rgb = [[0 for i in range(self.__numLEDS)] for i in range(3)] # RGB-Array
self.__image = matrixProperties.defaultImage # Default-Bild setzen
self.__imageIndexRed = 0
self.__imageIndexGreen = 1
self.__imageIndexBlue = 2
# Instanzvariablen
self.__light = True # Boolean: True / False
# Objekte
print("Instanz LEDmatrix wurde erstellt.")
self.__ipcon = IPConnection() # Create IP connection
self.__masterBrick = BrickMaster(self.__UIDmaster, self.__ipcon)
self.__brickletLEDstrip = BrickletLEDStrip(self.__UIDbricklet, self.__ipcon) # Create device object
# Connect to brickd --> Verbindung Masterbrick? richtiger RGB-Kanal einstellen?
self.__ipcon.connect(self.__HOST,
self.__PORT)
print("Verbindung zu brickd hergestellt.")
self.__brickletLEDstrip.set_frame_duration(20) # Anzeigedauer Bild: 20ms ergibt 20 Bilder pro Sekunde
self.__brickletLEDstrip.set_channel_mapping(self.__brickletLEDstrip.CHANNEL_MAPPING_RGB) # CHANNEL_MAPPING_RGB = 6 -> Farbkanal definieren (RGB statt BGR)
# Callback starten
self.__brickletLEDstrip.register_callback(self.__brickletLEDstrip.CALLBACK_FRAME_RENDERED,
lambda x: self.__loadPicture__())
print("Callback aktiviert.")
for y in range(anzahl):
if g_index % 2 == 0:
r_index = Ys[y] - 1
else:
r_index = 10 - Ys[y]
red[g_index - 1][r_index] = r
green[g_index - 1][r_index] = g
blue[g_index - 1][r_index] = b
if __name__ == "__main__":
ipcon = IPConnection()
ls = BrickletLEDStrip(UID, ipcon)
ipcon.connect(HOST, PORT)
fClear()
sleep(1)
setColor(255, 255, 255)
yLine(1)
yLine(10)
fOn()
while True:
while puls != 0:
b[r_index] = 255 - (g_index + r_index) * 255 / 200
if g_index == 200:
r_index = NUM_LEDS - 1
if g_index > 0:
ls.set_rgb_values(g_index - NUM_LEDS, NUM_LEDS, [0] * 16, [0] * 16,
[0] * 16)
# Set new data for next render cycle
ls.set_rgb_values(g_index, NUM_LEDS, r, g, b)
if __name__ == "__main__":
ipcon = IPConnection() # Create IP connection
ls = BrickletLEDStrip(UID, ipcon) # Create device object
ipcon.connect(HOST, PORT) # Connect to brickd
# Don't use device before ipcon is connected
# Set frame duration to 50ms (20 frames per second)
ls.set_frame_duration(10)
# Register frame rendered callback to function cb_frame_rendered
ls.register_callback(ls.CALLBACK_FRAME_RENDERED,
lambda x: cb_frame_rendered(x, ls, 0, 0, 255))
# Set initial rgb values to get started
ls.set_rgb_values(0, NUM_LEDS, r, g, b)
for y in range(anzahl):
if g_index % 2 == 1:
r_index = Ys[y] - 1
else:
r_index = 10 - Ys[y]
red[g_index - 1][r_index] = r
green[g_index - 1][r_index] = g
blue[g_index - 1][r_index] = b
if __name__ == "__main__":
ipcon = IPConnection()
ls = BrickletLEDStrip(UID, ipcon)
ipcon.connect(HOST, PORT)
fClear()
sleep(1)
ls.set_frame_duration(1)
ls.register_callback(
ls.CALLBACK_FRAME_RENDERED, lambda w: fLight(
x, anzahl, y1, y2, y3, y4, y5, y6, y7, y8, y9, y10, r, g, b))
setColor(255, 255, 255)
xLine(7)
#!/usr/bin/env python
# -*- coding: utf-8 -*-
HOST = "localhost"
PORT = 4223
UID = "XYZ" # Change XYZ to the UID of your LED Strip Bricklet
from tinkerforge.ip_connection import IPConnection
from tinkerforge.bricklet_led_strip import BrickletLEDStrip
if __name__ == "__main__":
ipcon = IPConnection() # Create IP connection
ls = BrickletLEDStrip(UID, ipcon) # Create device object
ipcon.connect(HOST, PORT) # Connect to brickd
# Don't use device before ipcon is connected
# Set first 10 LEDs to green
ls.set_rgb_values(0, 10, [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0])
input("Press key to exit\n") # Use raw_input() in Python 2
ipcon.disconnect()
class LEDmatrixConnect(object):
"""
init() wird automatisch nach der Erzeugung der Instanz aufgerufen. (-> magische Methode)
Erstellt ein device Objekt und baut die Verbindung zu brickd auf. (Verbindung zu Master Brick????)
"""
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect[POST])
def __init__(self):
# Attribute importiert
self.__UIDmaster = matrixProperties.UIDmaster # "6et15y"
self.__UIDbricklet = matrixProperties.UIDbricklet # "wVj"
self.__HOST = matrixProperties.HOST # "localhost"
self.__PORT = matrixProperties.PORT # 4223
self.__matrixIndexRed = matrixProperties.IndexRed # 0
self.__matrixIndexGreen = matrixProperties.IndexGreen # 1
self.__matrixIndexBlue = matrixProperties.IndexBlue # 2
self.__rows = matrixProperties.ROWS # 10
self.__columns = matrixProperties.COLUMNS # 20
self.__LEDnr = matrixProperties.LEDnr # Liste LED-Nummern 0 bis 199
self.__numLEDS = matrixProperties.NUM_LEDS # 16
self.__rgb = [[0 for i in range(self.__numLEDS)]
for i in range(3)] # RGB-Array
self.__image = matrixProperties.defaultImage # Default-Bild setzen
self.__imageIndexRed = 0
self.__imageIndexGreen = 1
self.__imageIndexBlue = 2
# Instanzvariablen
self.__light = True # Boolean: True / False
# Objekte
print("Instanz LEDmatrix wurde erstellt.")
self.__ipcon = IPConnection() # Create IP connection
self.__masterBrick = BrickMaster(self.__UIDmaster, self.__ipcon)
self.__brickletLEDstrip = BrickletLEDStrip(
self.__UIDbricklet, self.__ipcon) # Create device object
# Connect to brickd --> Verbindung Masterbrick? richtiger RGB-Kanal einstellen?
self.__ipcon.connect(self.__HOST, self.__PORT)
print("Verbindung zu brickd hergestellt.")
self.__brickletLEDstrip.set_frame_duration(
20) # Anzeigedauer Bild: 20ms ergibt 20 Bilder pro Sekunde
self.__brickletLEDstrip.set_channel_mapping(
self.__brickletLEDstrip.CHANNEL_MAPPING_RGB
) # CHANNEL_MAPPING_RGB = 6 -> Farbkanal definieren (RGB statt BGR)
# Callback starten
self.__brickletLEDstrip.register_callback(
self.__brickletLEDstrip.CALLBACK_FRAME_RENDERED,
lambda x: self.__loadPicture__())
print("Callback aktiviert.")
# ======= private Methoden ==========================================================================
# fillRGBs(), fillAsc(), fillDesc(), loadPicture()
def __fillRGBs__(self, yMatrix, xImage, yImage):
""" Private Methode: Füllt die Farbinformationen für einen Pixel in die einzelnen RGB-Arrays ab. """
self.__rgb[self.__matrixIndexRed][yMatrix] = self.__image[xImage][
yImage][self.__imageIndexRed]
self.__rgb[self.__matrixIndexGreen][yMatrix] = self.__image[xImage][
yImage][self.__imageIndexGreen]
self.__rgb[self.__matrixIndexBlue][yMatrix] = self.__image[xImage][
yImage][self.__imageIndexBlue]
def __fillAsc__(self, xImage, yMatrix):
""" Private Methode: Füllt eine Spalte für die LED-Matrix aus (von unten nach oben) """ # 0 bis 9
yImage = 0
i = 0
while (i < self.__rows): # i < 10
self.__fillRGBs__(yMatrix, xImage, yImage)
i += 1
yImage += 1
yMatrix += 1
if (yMatrix >= self.__rows):
yMatrix = 0
def __fillDesc__(self, xImage, yMatrix):
""" Private Methode: Füllt eine Spalte für die LED-Matrix aus (von oben nach unten) """ # 9 bis 0
yImage = 0
i = 0
while (i < self.__rows): # i < 10
self.__fillRGBs__(yMatrix, xImage, yImage)
i += 1
yImage += 1
yMatrix -= 1
if (yMatrix < 0):
yMatrix = self.__rows - 1
def __loadPicture__(self):
""" Methode lädt ein ganzes Bild, sofern self.__light auf True gesetzt ist => Licht an. """
if (self.__light is True):
xMatrix = 0
yMatrix = 0
xImage = 0
columns = self.__columns # 20
while (columns > 0):
if (
xMatrix % 2 == 0
): # Farbwerte von image-array nach rgb-array bei gerader Spalte
y = 0
self.__fillAsc__(xImage, yMatrix)
else: # Farbwerte von image-array nach rgb-array bei ungerader Spalte
y = self.__rows - 1
self.__fillDesc__(xImage, self.__rows - (yMatrix + 1))
# Aufrufen der Methode set_rgb_values(index, length, r, g, b). (r, g, b, verlangen 16er-Array's)
self.__brickletLEDstrip.set_rgb_values(
self.__LEDnr[xMatrix][y],
self.__rows, # self.__rows = 10
self.__rgb[self.__matrixIndexRed],
self.__rgb[self.__matrixIndexGreen],
self.__rgb[self.__matrixIndexBlue])
columns -= 1
xImage += 1
xMatrix += 1
if xMatrix >= self.__columns:
xMatrix = 0
xImage = 0
# ======= public Methoden ==================================================
# connect(), finish(), setVelocity(), lightOff(), setImage(), getImage()
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect/connect[PUT])
def connect(self):
""" Verbindungsaufbau """
self.__ipcon.connect(self.__HOST, self.__PORT)
print("Verbindung zu brickd hergestellt.")
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect/finish[PUT])
def finish(self):
""" Beendet die Verbindung. """
# input("Press key to exit\n")
self.__ipcon.disconnect()
print("Verbindung beendet.")
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect/setVelocity/<int:frequenz>[PUT])
def setFrameDuration(self, millisec: int = 20):
""" Set frame duration to 50ms (20 frames per second).
Verändert die Anzeigedauer eines Frames.
:param millisec: int
"""
self.__brickletLEDstrip.set_frame_duration(millisec)
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect/getFrameDuration[GET])
def getFrameDuration(self) -> int:
""" Gibt einen int-Wert zurück. Anzeigedauer der Frames auf dem LED-Display.
(20ms entspricht 50 Bilder/Sekunde)
:return frame duration: int
"""
return self.__brickletLEDstrip.get_frame_duration()
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect/light/<boolean:status>[PUT])
def light(self, status: bool = True): # status = boolean True / False
""" Licht-Regelung auf 'unterster' Stufe, wirkt sich auf den gesamten LED-Display.
True = 'Licht an', False = 'Licht aus'
:param status: boolean
"""
self.__light = status
time.sleep(1)
if (status is False):
i = 0
while i < self.__columns: # hier 20
self.__brickletLEDstrip.set_rgb_values(i * 10, 10,
[0] * self.__numLEDS,
[0] * self.__numLEDS,
[0] * self.__numLEDS)
i += 1
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect/setImage/<list:image>[PUT])
def setImage(self, image: list):
""" Liste mit den RGB-Werten der
Form [[[red, green, blue] for i in range(x columns)] for i in range(y rows)]
:param image: list
"""
self.__image = image
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect/setImageRGBindex/<int:red>/<int:green>/<int:blue>[PUT])
def setImageRGBindex(self, red: int, green: int, blue: int):
""" Werte: 0 bis 2, Default: red = 0, green = 1, blue = 2
:param red: int
:param green: int
:param blue: int
"""
self.__imageIndexRed = red
self.__imageIndexGreen = green
self.__imageIndexBlue = blue
#!/usr/bin/env python
# -*- coding: utf-8 -*-
HOST = "localhost"
PORT = 4223
UID = "XYZ" # Change XYZ to the UID of your LED Strip Bricklet
from tinkerforge.ip_connection import IPConnection
from tinkerforge.bricklet_led_strip import BrickletLEDStrip
if __name__ == "__main__":
ipcon = IPConnection() # Create IP connection
ls = BrickletLEDStrip(UID, ipcon) # Create device object
ipcon.connect(HOST, PORT) # Connect to brickd
# Don't use device before ipcon is connected
# Set first 10 LEDs to green
ls.set_rgb_values(0, 10, [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
[255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 0, 0, 0, 0, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0])
raw_input("Press key to exit\n") # Use input() in Python 3
ipcon.disconnect()
def cb_frame_rendered(length, ls):
global r_index
b[r_index] = 0
if r_index == NUM_LEDS-1:
r_index = 0
else:
r_index += 1
b[r_index] = 255
# Set new data for next render cycle
ls.set_rgb_values(0, NUM_LEDS, r, g, b)
if __name__ == "__main__":
ipcon = IPConnection() # Create IP connection
ls = BrickletLEDStrip(UID, ipcon) # Create device object
ipcon.connect(HOST, PORT) # Connect to brickd
# Don't use device before ipcon is connected
# Set frame duration to 50ms (20 frames per second)
ls.set_frame_duration(50)
# Register frame rendered callback to function cb_frame_rendered
ls.register_callback(ls.CALLBACK_FRAME_RENDERED,
lambda x: cb_frame_rendered(x, ls))
# Set initial rgb values to get started
ls.set_rgb_values(0, NUM_LEDS, r, g, b)
raw_input("Press key to exit\n") # Use input() in Python 3
class LEDmatrixConnect(object):
"""
init() wird automatisch nach der Erzeugung der Instanz aufgerufen. (-> magische Methode)
Erstellt ein device Objekt und baut die Verbindung zu brickd auf. (Verbindung zu Master Brick????)
"""
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect[POST])
def __init__(self):
# Attribute importiert
self.__UIDmaster = matrixProperties.UIDmaster # "6et15y"
self.__UIDbricklet = matrixProperties.UIDbricklet # "wVj"
self.__HOST = matrixProperties.HOST # "localhost"
self.__PORT = matrixProperties.PORT # 4223
self.__matrixIndexRed = matrixProperties.IndexRed # 0
self.__matrixIndexGreen = matrixProperties.IndexGreen # 1
self.__matrixIndexBlue = matrixProperties.IndexBlue # 2
self.__rows = matrixProperties.ROWS # 10
self.__columns = matrixProperties.COLUMNS # 20
self.__LEDnr = matrixProperties.LEDnr # Liste LED-Nummern 0 bis 199
self.__numLEDS = matrixProperties.NUM_LEDS # 16
self.__rgb = [[0 for i in range(self.__numLEDS)] for i in range(3)] # RGB-Array
self.__image = matrixProperties.defaultImage # Default-Bild setzen
self.__imageIndexRed = 0
self.__imageIndexGreen = 1
self.__imageIndexBlue = 2
# Instanzvariablen
self.__light = True # Boolean: True / False
# Objekte
print("Instanz LEDmatrix wurde erstellt.")
self.__ipcon = IPConnection() # Create IP connection
self.__masterBrick = BrickMaster(self.__UIDmaster, self.__ipcon)
self.__brickletLEDstrip = BrickletLEDStrip(self.__UIDbricklet, self.__ipcon) # Create device object
# Connect to brickd --> Verbindung Masterbrick? richtiger RGB-Kanal einstellen?
self.__ipcon.connect(self.__HOST,
self.__PORT)
print("Verbindung zu brickd hergestellt.")
self.__brickletLEDstrip.set_frame_duration(20) # Anzeigedauer Bild: 20ms ergibt 20 Bilder pro Sekunde
self.__brickletLEDstrip.set_channel_mapping(self.__brickletLEDstrip.CHANNEL_MAPPING_RGB) # CHANNEL_MAPPING_RGB = 6 -> Farbkanal definieren (RGB statt BGR)
# Callback starten
self.__brickletLEDstrip.register_callback(self.__brickletLEDstrip.CALLBACK_FRAME_RENDERED,
lambda x: self.__loadPicture__())
print("Callback aktiviert.")
# ======= private Methoden ==========================================================================
# fillRGBs(), fillAsc(), fillDesc(), loadPicture()
def __fillRGBs__(self, yMatrix, xImage, yImage):
""" Private Methode: Füllt die Farbinformationen für einen Pixel in die einzelnen RGB-Arrays ab. """
self.__rgb[self.__matrixIndexRed][yMatrix] = self.__image[xImage][yImage][self.__imageIndexRed]
self.__rgb[self.__matrixIndexGreen][yMatrix] = self.__image[xImage][yImage][self.__imageIndexGreen]
self.__rgb[self.__matrixIndexBlue][yMatrix] = self.__image[xImage][yImage][self.__imageIndexBlue]
def __fillAsc__(self, xImage, yMatrix):
""" Private Methode: Füllt eine Spalte für die LED-Matrix aus (von unten nach oben) """ # 0 bis 9
yImage = 0
i = 0
while (i < self.__rows): # i < 10
self.__fillRGBs__(yMatrix, xImage, yImage)
i += 1
yImage += 1
yMatrix += 1
if (yMatrix >= self.__rows):
yMatrix = 0
def __fillDesc__(self, xImage, yMatrix):
""" Private Methode: Füllt eine Spalte für die LED-Matrix aus (von oben nach unten) """ # 9 bis 0
yImage = 0
i = 0
while (i < self.__rows): # i < 10
self.__fillRGBs__(yMatrix, xImage, yImage)
i += 1
yImage += 1
yMatrix -= 1
if (yMatrix < 0):
yMatrix = self.__rows - 1
def __loadPicture__(self):
""" Methode lädt ein ganzes Bild, sofern self.__light auf True gesetzt ist => Licht an. """
if (self.__light is True):
xMatrix = 0
yMatrix = 0
xImage = 0
columns = self.__columns # 20
while (columns > 0):
if (xMatrix % 2 == 0): # Farbwerte von image-array nach rgb-array bei gerader Spalte
y = 0
self.__fillAsc__(xImage, yMatrix)
else: # Farbwerte von image-array nach rgb-array bei ungerader Spalte
y = self.__rows - 1
self.__fillDesc__(xImage, self.__rows - (yMatrix + 1))
# Aufrufen der Methode set_rgb_values(index, length, r, g, b). (r, g, b, verlangen 16er-Array's)
self.__brickletLEDstrip.set_rgb_values(self.__LEDnr[xMatrix][y], self.__rows, # self.__rows = 10
self.__rgb[self.__matrixIndexRed],
self.__rgb[self.__matrixIndexGreen],
self.__rgb[self.__matrixIndexBlue])
columns -= 1
xImage += 1
xMatrix += 1
if xMatrix >= self.__columns:
xMatrix = 0
xImage = 0
# ======= public Methoden ==================================================
# connect(), finish(), setVelocity(), lightOff(), setImage(), getImage()
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect/connect[PUT])
def connect(self):
""" Verbindungsaufbau """
self.__ipcon.connect(self.__HOST, self.__PORT)
print("Verbindung zu brickd hergestellt.")
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect/finish[PUT])
def finish(self):
""" Beendet die Verbindung. """
# input("Press key to exit\n")
self.__ipcon.disconnect()
print("Verbindung beendet.")
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect/setVelocity/<int:frequenz>[PUT])
def setFrameDuration(self, millisec: int = 20):
""" Set frame duration to 50ms (20 frames per second).
Verändert die Anzeigedauer eines Frames.
:param millisec: int
"""
self.__brickletLEDstrip.set_frame_duration(millisec)
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect/getFrameDuration[GET])
def getFrameDuration(self) -> int:
""" Gibt einen int-Wert zurück. Anzeigedauer der Frames auf dem LED-Display.
(20ms entspricht 50 Bilder/Sekunde)
:return frame duration: int
"""
return self.__brickletLEDstrip.get_frame_duration()
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect/light/<boolean:status>[PUT])
def light(self, status: bool = True): # status = boolean True / False
""" Licht-Regelung auf 'unterster' Stufe, wirkt sich auf den gesamten LED-Display.
True = 'Licht an', False = 'Licht aus'
:param status: boolean
"""
self.__light = status
time.sleep(1)
if (status is False):
i = 0
while i < self.__columns: # hier 20
self.__brickletLEDstrip.set_rgb_values(i * 10, 10, [0] * self.__numLEDS, [0] * self.__numLEDS,
[0] * self.__numLEDS)
i += 1
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect/setImage/<list:image>[PUT])
def setImage(self, image: list):
""" Liste mit den RGB-Werten der
Form [[[red, green, blue] for i in range(x columns)] for i in range(y rows)]
:param image: list
"""
self.__image = image
# @LEDmatrix.route('ledmatrix.bfh.ch/api/v1.0/LEDmatrixConnect/setImageRGBindex/<int:red>/<int:green>/<int:blue>[PUT])
def setImageRGBindex(self, red: int, green: int, blue: int):
""" Werte: 0 bis 2, Default: red = 0, green = 1, blue = 2
:param red: int
:param green: int
:param blue: int
"""
self.__imageIndexRed = red
self.__imageIndexGreen = green
self.__imageIndexBlue = blue
class LightingModule(StateModule):
menu_title = "Lighting"
outputs = {}
edit = False
device = None
current = 0
intens = 100
color = 0
colors = [
{
"name": "Warm",
"color": (255, 160, 25)
},
{
"name": "Cool",
"color": (255, 255, 50)
},
{
"name": "Red",
"color": (255, 0, 0)
},
{
"name": "Blue",
"color": (0, 0, 255)
},
{
"name": "Magenta",
"color": (255, 0, 255)
},
{
"name": "Green",
"color": (0, 255, 0)
},
]
def __init__(self, controller):
super(LightingModule, self).__init__(controller)
self.set_light()
def draw(self, clear=True):
if clear:
self.controller.screen.device.clear_display()
if not len(self.outputs):
self.controller.screen.draw("values", {})
return
outputs = self.outputs[self.outputs.keys()[self.current]]
if self.edit:
name = outputs["name"] + "*"
else:
name = outputs["name"]
if outputs["type"] == "dimmer":
self.controller.screen.draw("values", {
"title": name,
"value": str(self.intens) + " %",
})
if outputs["type"] == "select":
self.controller.screen.draw(
"values", {
"title": name,
"value": str(self.colors[self.color]["name"]),
})
def try_bricklet(self, uid, device_identifier, position):
if device_identifier == 231 and "taskint" not in self.outputs:
self.device = BrickletLEDStrip(uid, self.controller.ipcon)
self.outputs["taskint"] = {
"name": "Task Intensity",
"type": "dimmer",
}
self.outputs["taskcol"] = {
"name": "Task Colour",
"type": "select",
}
self.device.set_chip_type(self.device.CHIP_TYPE_WS2811)
self.device.set_channel_mapping(self.device.CHANNEL_MAPPING_BRG)
print("Created LEDBrick Output")
def change_light(self, direction):
if self.outputs[self.outputs.keys()[self.current]]["type"] == "dimmer":
if direction == "up" and self.intens < 100:
self.intens += 10
elif direction == "down" and self.intens > 0:
self.intens -= 10
else:
if direction == "up":
if self.color >= len(self.colors) - 1:
self.color = 0
else:
self.color += 1
elif direction == "down":
if self.color <= 0:
self.color = len(self.colors) - 1
else:
self.color -= 1
# print "change " + direction + str(self.color)
def set_light(self):
if self.device:
color = self.colors[self.color]["color"]
color = (int(color[0] * self.intens / 100),
int(color[1] * self.intens / 100),
int(color[2] * self.intens / 100))
r = [color[0] for i in range(16)]
b = [color[1] for i in range(16)]
g = [color[2] for i in range(16)]
self.device.set_rgb_values(0, 16, r, b, g)
r = [255 for i in range(16)]
b = [0 for i in range(16)]
g = [0 for i in range(16)]
self.device.set_rgb_values(17, 1, r, b, g)
self.controller.scheduler.enter(
1,
1,
self.set_light,
(),
)
def navigate(self, direction):
if not self.edit:
if direction == "forward":
self.edit = True
self.draw()
if direction == "back":
self.controller.prev_module()
if direction in ["down", "up"]:
if direction == "down":
self.current = self.current + 1
else:
self.current = self.current - 1
if self.current >= len(self.outputs):
self.current = 0
elif self.current < 0:
self.current = len(self.outputs) - 1
# print "Output: " + str(list(self.outputs)[self.current])
self.draw()
else:
if direction == "back":
self.edit = False
self.draw()
if direction in ["down", "up"]:
self.change_light(direction)
self.draw()
def tick(self):
self.draw(clear=False)
#!/usr/bin/env python
# -*- coding: utf-8 -*-
HOST = "localhost"
PORT = 4223
UID = "wVj" # Change XYZ to the UID of your LED Strip Bricklet
from tinkerforge.ip_connection import IPConnection
from tinkerforge.bricklet_led_strip import BrickletLEDStrip
if __name__ == "__main__":
ipcon = IPConnection() # Create IP connection
ls = BrickletLEDStrip(UID, ipcon) # Create device object
ipcon.connect(HOST, PORT) # Connect to brickd
# Don't use device before ipcon is connected
while 1==1:
# Set first 10 LEDs to green
ls.set_frame_duration(1)
for i in range (13):
r = [200, 0, 0, 200, 11*i, 11*i, 100, 11, 111, 111, 111, 11, 100, 123, 234, 255]
g = [0, 190, 0, 255, 255, 255, 255, 11*i, 255, 255, 255, 200, 10, 20, 11, 11]
b = [0, 0, 100, 150, 11, 77, 11*i, 11*i, 50, 55, 66, 255, 11, 234, 123, 11]
ls.set_rgb_values(16*i, 16, r, g, b)
raw_input("Press key to exit\n") # Use input() in Python 3
ipcon.disconnect()
#!/usr/bin/env python
# -*- coding: utf-8 -*-
HOST = "localhost"
PORT = 4223
UID = "XYZ" # Change XYZ to the UID of your LED Strip Bricklet
from tinkerforge.ip_connection import IPConnection
from tinkerforge.bricklet_led_strip import BrickletLEDStrip
if __name__ == "__main__":
ipcon = IPConnection() # Create IP connection
ls = BrickletLEDStrip(UID, ipcon) # Create device object
ipcon.connect(HOST, PORT) # Connect to brickd
# Don't use device before ipcon is connected
# Set first 10 LEDs to green
r = [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
g = [255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 0, 0, 0, 0, 0, 0]
b = [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
ls.set_rgb_values(0, 10, r, g, b)
raw_input("Press key to exit\n") # Use input() in Python 3
ipcon.disconnect()
