class testcase(unittest.TestCase):
logger = set_logger(__name__)
sdk = tools.get_api()
model = tools.get_model()
filters = tools.get_filter()
filter_count = int(tools.read_job_config()['filter_count'])
unfilter_count = int(tools.read_job_config()['unfilter_count'])
timeout = tools.read_job_config()['case_timeout']
def setUp(self):
self.timeout_flag = None
self.flag1 = 0
self.flag2 = 0
self.key=None
self.logger.info('X/E 测试chip0 filter uuid被动扫描 chip1 filter uuid 主动扫描，S chip0 filter uuid 主动扫描')
self.timer = Timer(self.timeout, self.set_timeout)
self.timer.start()
def tearDown(self):
self.timer.cancel()
# 测试方法
def test_scan_filter_uuid(self):
if self.model.startswith('S') or self.model.startswith('s'):
a = threading.Thread(target=self.chip0_scan, args=(0, self.filters['filter_uuid']))
a.setDaemon(True)
a.start()
while True:
if self.flag1 == 1:
self.assertTrue(True)
self.logger.info('pass\n')
break
elif self.timeout_flag:
self.logger.info('fail\n')
self.fail('Case failed,start scan timeout.')
self.logger.error("Case failed,start scan timeout.")
break
else:
a = threading.Thread(target=self.chip0_scan, args=(1, self.filters['filter_uuid']))
b = threading.Thread(target=self.chip1_scan, args=(0, self.filters['filter_uuid']))
a.setDaemon(True)
b.setDaemon(True)
b.start()
a.start()
while True:
if self.flag1==1 and self.flag2==1:
self.assertTrue(True)
self.logger.info('pass\n')
break
elif self.timeout_flag:
self.logger.info('fail\n')
self.fail('Case failed,case timeout.')
self.logger.error("Case failed,start scan timeout.")
# break
sys.exit(1)
class testcase(unittest.TestCase):
logger = set_logger(__name__)
sdk = tools.get_api()
model = tools.get_model()
filter_count = int(tools.read_job_config()['filter_count'])
unfilter_count = int(tools.read_job_config()['unfilter_count'])
timeout = tools.read_job_config()['case_timeout']
def setUp(self):
self.timeout_flag = None
self.flag1 = 0
self.flag2 = 0
self.key=None
self.logger.info('X/E 测试chip0 filter duplicate主动扫描 chip1 不加filter duplicate主动扫描，S chip0 filter duplicate 被动扫描')
self.timer = Timer(self.timeout, self.set_timeout)
self.timer.start()
def tearDown(self):
self.timer.cancel()
class testcase(unittest.TestCase):
logger = set_logger(__name__)
sdk = tools.get_api()
model = tools.get_model()
filters = tools.get_filter()
filter_count = int(tools.read_job_config()['filter_count'])
unfilter_count = tools.read_job_config()['unfilter_count']
timeout = tools.read_job_config()['case_timeout']
def setUp(self):
self.timeout_flag = None
self.flag1 = 0
self.flag2 = 0
self.logger.info('测试X/E chip0 不加filter rssi被动扫描 chip1 filter uuid 被动扫描，S chip0 不加filter uuid 主动扫描')
self.timer = Timer(10, self.set_timeout)
self.timer.start()
def tearDown(self):
self.timer.cancel()
class testcase(unittest.TestCase):
logger = set_logger(__name__)
sdk = tools.get_api()
model = tools.get_model()
filter_count = int(tools.read_job_config()['filter_count'])
unfilter_count = int(tools.read_job_config()['unfilter_count'])
timeout = tools.read_job_config()['case_timeout']
local=tools.read_job_config()["local"]
def setUp(self):
self.timeout_flag = None
self.flag1 = 0
self.flag2 = 0
self.key=None
self.logger.info('X/E duration 参数测试chip0 主动扫 chip1 被动扫d=5.58s ，S chip0 主动扫d=7.8s ')
self.timer = Timer(self.timeout, self.set_timeout)
self.timer.start()
def tearDown(self):
self.timer.cancel()
class testcase(unittest.TestCase):
logger = set_logger(__name__)
sdk = tools.get_api()
model = tools.get_model()
filters = tools.get_filter()
timeout = tools.read_job_config()['case_timeout']
filter_count = int(tools.read_job_config()['filter_count'])
unfilter_count = int(tools.read_job_config()['unfilter_count'])
def setUp(self):
self.timeout_flag = None
self.flag1 = 0
self.flag2 = 0
self.logger.info('测试chip0 filter name主动扫描，chip1 不加过虑主动扫描')
self.timer = Timer(self.timeout, self.set_timeout)
self.timer.start()
def tearDown(self):
self.timer.cancel()
#测试方法
# noinspection PyUnreachableCode,PyUnreachableCode
def test_scan_filter_name(self):
if self.model.startswith('S') or self.model.startswith('s'):
a = threading.Thread(target=self.chip0_scan,
args=(1, self.filters['filter_name']))
b = threading.Thread(target=self.chip0_scan, args=(0, ))
a.setDaemon(True)
b.setDaemon(True)
b.start()
a.start()
while True:
if self.flag1 == 2:
self.assertTrue(True)
self.logger.info('pass\n')
break
elif self.timeout_flag:
self.logger.info('fail\n')
self.fail('Case failed,start scan timeout.')
self.logger.error("Case failed,start scan timeout.")
break
else:
a = threading.Thread(target=self.chip0_scan,
args=(1, self.filters['filter_name']))
b = threading.Thread(target=self.chip1_scan, args=(0, ))
a.setDaemon(True)
b.setDaemon(True)
b.start()
a.start()
while True:
if self.flag1 == 1 and self.flag2 == 1:
self.assertTrue(True)
self.logger.info('pass\n')
break
elif self.timeout_flag:
self.logger.info('fail\n')
self.fail('Case failed,start scan timeout.')
self.logger.error("Case failed,start scan timeout.")
break
# noinspection PyUnreachableCode
def chip0_scan(self, active=0, filter_name=None):
#step1:chip 1 start passive scan,then start chip0 scan.
with closing(
self.sdk.scan(chip=0, active=active,
filter_name=filter_name)) as self.sse1:
count = 0
for message in self.sse1:
if message.startswith('data'):
msg = json.loads(message[5:])
if filter_name:
#进入开启过滤的扫描结果判断流程
if count < self.filter_count:
print('chip0', count, message)
name = msg['name']
if name != self.filters['filter_name']:
self.fail('filter name failed.')
self.logger.debug('filter name failed.')
break
else:
count += 1
else:
self.flag1 += 1
self.logger.debug(
'Step 1:chip0 start scan with filter name success.'
)
break
else:
#进入不开启过滤的扫描结果判断流程
if count < 300:
print('chip0', count, message)
count += 1
else:
self.flag1 += 1
self.logger.debug(
'Step 1:chip0 start scan with no filter name success.'
)
break
# noinspection PyUnreachableCode
def chip1_scan(self, active=0, filter_name=None):
#step2:start chip0 scan.
with closing(
self.sdk.scan(chip=1, active=active,
filter_name=filter_name)) as self.sse2:
count = 0
tmp_name = []
for message in self.sse2:
if message.startswith('data'):
msg = json.loads(message[5:])
if filter_name:
if count < self.filter_count:
print('chip1', count, message)
name = msg['name']
if name != filter_name:
self.fail('filter name failed.')
self.logger.debug('filter name failed.')
break
else:
count += 1
else:
self.flag2 += 1
self.logger.debug(
'Step 2:chip1 start scan with filter name success.'
)
break
else:
#进入不开启过滤的扫描结果判断流程
if count < self.unfilter_count:
print('chip1', count, message)
count += 1
else:
self.flag2 += 1
self.logger.debug(
'Step 2:chip1 start scan with no filter name success.'
)
break
def set_timeout(self):
self.timeout_flag = True
class testcase(unittest.TestCase):
logger = set_logger(__name__)
sdk = get_api()
model = get_model()
def setUp(self):
self.timeout_flag = None
self.flag1 = None
self.flag2 = None
self.logger.info('测试两个芯片同时开启被动扫描')
self.timer = Timer(30, self.timeout)
self.timer.start()
def tearDown(self):
self.timer.cancel()
# noinspection PyUnreachableCode
def test_chips_start_scan_meanwhile(self):
if self.model.startswith('S') or self.model.startswith('s'):
self.assertTrue(True)
else:
threading.Thread(target=self.chip0_scan).start()
threading.Thread(target=self.chip1_scan).start()
while True:
if self.flag1 and self.flag2:
self.assertTrue(True)
self.logger.info('pass\n')
break
elif self.timeout_flag:
self.logger.info('fail\n')
self.fail('Case failed,start scan timeout.')
self.logger.error("Case failed,start scan timeout.")
break
# noinspection PyUnreachableCode
def chip0_scan(self):
#step1:chip 1 start passive scan,then start chip0 scan.
with closing(self.sdk.scan(chip=0)) as self.sse1:
count = 0
for message in self.sse1:
if count < 300:
if message.startswith('data'):
# print('chip0',message)
count += 1
if 'scanData' in message:
self.fail('Scan passive mode error',message)
break
elif 'keep-alive' in message:
pass
else:
self.logger.error('start scan fail,%s' % message)
else:
self.flag1 = True
self.logger.debug('Step 1:chip0 start passive scan success.')
break
# noinspection PyUnreachableCode
def chip1_scan(self):
#step2:start chip0 scan.
with closing(self.sdk.scan(chip=1)) as self.sse2:
count = 0
for message in self.sse2:
if count < 300:
if message.startswith('data'):
# print('chip1',message)
count += 1
if 'scanData' in message:
self.fail('Scan passive mode error',message)
break
elif 'keep-alive' in message:
pass
else:
self.logger.error('Step 2:start scan fail,%s' % message)
else:
self.flag2 = True
self.logger.debug('Step 2:chip1 start active scan success ')
break
def timeout(self):
self.timeout_flag = True
class testcase(unittest.TestCase):
logger = set_logger(__name__)
local_sdk, cloud_sdk = tools.get_all_api()
model = tools.get_model()
filters = tools.get_filter()
timeout = tools.read_job_config()['case_timeout']
def setUp(self):
self.timeout_flag = None
self.flag1 = None
self.flag2 = None
self.logger.info('测试点：测试chip0 local扫描的同时,chip1进行cloud扫描')
self.timer = Timer(self.timeout, self.set_timeout)
self.timer.start()
def tearDown(self):
self.timer.cancel()
def test_scan_on_cloud_local(self):
a = threading.Thread(target=self.local_scan)
b = threading.Thread(target=self.cloud_scan)
a.setDaemon(True)
b.setDaemon(True)
b.start()
a.start()
while True:
if self.flag1 and self.flag2:
self.assertTrue(True)
self.logger.info('pass\n')
break
elif self.timeout_flag:
self.logger.info('fail\n')
self.fail('Case failed,start scan timeout.')
self.logger.error("Case failed,start scan timeout.")
break
def test_step(self):
self.flag = None
#step1:start local scan.
with closing(self.local_sdk.scan(chip=1)) as self.sse2:
count = 0
for message in self.sse2:
if message.startswith('data'):
if count < 100:
print('local', count, message)
count += 1
else:
self.flag = True
self.logger.debug('Step 1: start local scan success.')
break
#step3:停止本地扫描
time.sleep(3)
self.logger.debug('Step 2: stop local scan success.')
#step2:start cloud scan.
with closing(self.cloud_sdk.scan(chip=0)) as self.sse1:
count = 0
for message in self.sse1:
if message.startswith('data'):
if count < 100:
print('cloud', count, message)
count += 1
else:
self.flag = True
self.logger.debug('Step 3:start cloud scan success.')
break
def set_timeout(self):
self.timeout_flag = True
class testcase(unittest.TestCase):
logger = set_logger(__name__)
sdk = tools.get_api()
model = tools.get_model()
filter_count = int(tools.read_job_config()['filter_count'])
unfilter_count = int(tools.read_job_config()['unfilter_count'])
timeout = tools.read_job_config()['case_timeout']
local = tools.read_job_config()["local"]
def setUp(self):
self.timeout_flag = None
self.flag1 = 0
self.flag2 = 0
self.key = None
self.logger.info(
'X/E duration 参数测试chip0 被动扫 chip1 主动扫 d=9.99s，S chip0 被动扫d=9.99s '
)
self.timer = Timer(self.timeout, self.set_timeout)
self.timer.start()
def tearDown(self):
self.timer.cancel()
# 测试方法
# noinspection PyUnreachableCode
def test_scan_filter_duplicates(self):
# duration1=2
if self.local == "True":
if self.model.startswith('S') or self.model.startswith('s'):
a = threading.Thread(target=self.chip0_scan, args=(1, 9.99))
a.setDaemon(True)
a.start()
while True:
if self.flag1 == 1:
self.logger.info('pass\n')
break
elif self.timeout_flag:
self.logger.info('fail\n')
self.fail('Case failed,start scan timeout.')
self.logger.error("Case failed,start scan timeout.")
break
else:
a = threading.Thread(target=self.chip0_scan, args=(1, ))
b = threading.Thread(target=self.chip1_scan, args=(0, 9.99))
a.setDaemon(True)
b.setDaemon(True)
b.start()
a.start()
while True:
if self.flag1 == 1 and self.flag2 == 1:
self.logger.info('pass\n')
break
elif self.timeout_flag:
self.logger.info('fail\n')
self.fail('Case failed,case timeout.')
self.logger.error("Case failed,start scan timeout.")
break
sys.exit(1)
else:
self.logger.info("AC不需要测试duration参数，duration参数只对AP端生效")
pass
def chip0_scan(self, active=0, duration=None):
# step1:chip 1 start passive scan,then start chip0 scan.
if not duration is None:
if isinstance(duration, str):
duration1 = 5
print("字符串duration=", duration1)
# 负数和0 扫描5s后停止
elif duration <= 0:
duration1 = 5
print("负数和0 duration=", duration1)
# 小数位数小于等于3时，会按照设置的时间停止扫描；小数位数大于3时，参数不起效，一直扫描数据
elif duration > float(str(duration)[:5]):
duration1 = None
print("小数位数大于3 duration=", duration1)
else:
duration1 = duration
else:
duration1 = None
with closing(self.sdk.scan(chip=0, active=active,
duration=duration1)) as self.sse1:
if duration1:
# time.sleep(duration1+0.5)
d1 = datetime.datetime.now()
print("start time at", datetime.datetime.now())
for message in self.sse1:
continue
d2 = datetime.datetime.now()
print("end time at ", datetime.datetime.now())
t = float(((d2 - d1).seconds)) + float(
(d2 - d1).microseconds / 1000 / 1000) - 1
print("second", t)
if t <= duration1:
self.flag1 += 1
self.logger.info(
"Step 1:chip0 start scan with duration success.")
else:
self.fail("chip 0 duration failed")
self.logger.debug("chip 0 duration failed")
else:
count = 0
for message in self.sse1:
if message.startswith("data"):
msg = json.loads(message[5:])
count += 1
print("chip 0 ", count, message)
if count > self.unfilter_count:
self.flag1 += 1
self.logger.info(
"Step 1:chip0 start scan with no duration success."
)
break
# noinspection PyUnreachableCode
def chip1_scan(self, active=0, duration=None):
# step2:start chip1 scan.
# 字符串 扫描5s后停止
if not duration is None:
if isinstance(duration, str):
duration1 = 5
print("字符串duration=", duration1)
# 负数和0 扫描5s后停止
elif duration <= 0:
duration1 = 5
print("负数和0 duration=", duration1)
# 小数位数小于等于3时，会按照设置的时间停止扫描；小数位数大于3时，参数不起效，一直扫描数据
elif duration > float(str(duration)[:5]):
duration1 = None
print("小数位数大于3 duration=", duration1)
else:
duration1 = duration
else:
duration1 = None
with closing(self.sdk.scan(chip=1, active=active,
duration=duration1)) as self.sse1:
if duration1:
# time.sleep(duration1+0.5)
d1 = datetime.datetime.now()
print("start time at", datetime.datetime.now())
for message in self.sse1:
continue
d2 = datetime.datetime.now()
print("end time at ", datetime.datetime.now())
t = float(((d2 - d1).seconds)) + float(
(d2 - d1).microseconds / 1000 / 1000) - 0.5
print("second", t)
if t <= duration1:
self.flag2 += 1
self.logger.info(
"Step 1:chip1 start scan with duration success.")
else:
self.fail("chip 0 duration failed")
self.logger.debug("chip 1 duration failed")
else:
count = 0
for message in self.sse1:
if message.startswith("data"):
msg = json.loads(message[5:])
count += 1
print("chip 0 ", count, message)
if count > self.unfilter_count:
self.flag2 += 1
self.logger.info(
"Step 1:chip1 start scan with no duration success."
)
break
def set_timeout(self):
self.timeout_flag = True
class testcase(unittest.TestCase):
logger = set_logger(__name__)
sdk = get_api()
model = get_model()
timeout = read_job_config()['case_timeout']
def setUp(self):
self.logger.info('测试在不同芯片之间，按先后顺序，能否成功开启扫描')
self.timer = Timer(self.timeout,self.close)
self.timer.start()
def tearDown(self):
self.timer.cancel()
def test_start_scan_in_diff_chip(self):
flag = None
if self.model.startswith('S')or self.model.startswith('s'):
self.logger.debug('if model is s1000系列的产品，直接pass')
#if model is s1000系列的产品，直接pass
self.assertTrue(True)
else:
#step1:chip 0 start scan,then stop scan
with closing(self.sdk.scan(chip = 0)) as self.sse:
for message in self.sse:
if message.startswith('data'):
flag = True
self.logger.debug("step1:chip 0 start scan,then stop scan success")
self.sse.close()
elif 'keep-alive' in message:
pass
else:
flag = False
self.logger.error('start scan fail,%s'%message)
#step2:chip 1 start scan,then stop scan.
with closing(self.sdk.scan(chip = 1)) as self.sse:
for message in self.sse:
if message.startswith('data'):
flag = True
self.logger.debug("step2:chip 1 start scan,then stop scan success")
self.sse.close()
elif 'keep-alive' in message:
pass
else:
flag = False
self.logger.error('start scan fail,%s'%message)
#step3:chip 0 start scan,then change to chip1 scan.
with closing(self.sdk.scan(chip = 0)) as self.sse:
for message in self.sse:
if message.startswith('data'):
flag = True
self.logger.debug("step3:chip 0 start scan,then change to chip1 scan success")
# self.change_scan(flag)
self.sse.close()
elif 'keep-alive' in message:
pass
else:
flag = False
self.logger.error('start scan fail,%s'%message)
#step4:chip 1 start scan,then change to chip0 scan.
with closing(self.sdk.scan(chip = 1)) as self.sse:
for message in self.sse:
if message.startswith('data'):
flag = True
self.logger.debug("step4:chip 1 start scan,then change to chip0 scan success")
# self.change_scan2(flag)
self.sse.close()
elif 'keep-alive' in message:
pass
else:
flag = False
self.logger.error('start scan fail,%s'%message)
#step5:chip 0 start scan,then change to chip1 scan.
with closing(self.sdk.scan(chip = 1)) as self.sse:
for message in self.sse:
if message.startswith('data'):
flag = True
self.logger.debug("step5:chip 0 start scan,then change to chip1 scan success.")
self.sse.close()
elif 'keep-alive' in message:
pass
else:
flag = False
self.logger.error('start scan fail,%s'%message)
self.assertTrue(flag)
if flag:
self.logger.info('case pass\n')
else:
self.logger.info('case fail\n')
class testcase(unittest.TestCase):
logger = set_logger(__name__)
api = get_api()
model = get_model()
def setUp(self):
self.logger.info('测试设备的主被动扫描切换功能')
self.timer = Timer(30, self.close)
self.timer.start()
def tearDown(self):
self.timer.cancel()
# noinspection PyUnreachableCode,PyUnreachableCode,PyUnreachableCode,PyUnreachableCode,PyUnreachableCode,PyUnreachableCode,PyUnreachableCode
def test_change_scan_mode(self):
flag = None
count = 0
if self.model.startswith('S') or self.model.startswith('s'):
with closing(self.api.scan(active=0)) as self.sse1:
count = 0
for data1 in self.sse1:
if count < 200:
if 'scanData' in data1:
self.fail('passive scan start fail')
self.logger.error('passive scan start fail')
break
else:
count += 1
flag = True
else:
flag = True
# self.sse.close()
self.logger.debug('Step1:passive scan start success')
break
with closing(self.api.scan(active=1)) as self.sse2:
count = 0
for data2 in self.sse2:
if count < 200:
if 'scanData' in data2:
flag = True
self.logger.debug(
'Step2:Active scan start success')
break
else:
count += 1
else:
self.fail('Active scan start failed')
self.logger.error('Step2:Active scan start fail')
break
with closing(self.api.scan(active=0)) as self.sse3:
count = 0
for data3 in self.sse3:
if count < 200:
if 'scanData' in data3:
self.fail('passive scan start fail')
self.logger.error('passive scan start fail')
break
else:
count += 1
else:
flag = True
self.logger.debug('Step3:passive scan start success')
break
with closing(self.api.scan(active=1)) as self.sse4:
count = 0
for data4 in self.sse4:
if count < 200:
if 'scanData' in data4:
flag = True
self.logger.debug(
'Step5:Active scan start success')
break
else:
count += 1
else:
self.fail('Active scan start failed')
self.logger.error('Step5:Active scan start fail')
break
self.assertTrue(flag)
if flag:
self.logger.info('pass\n')
else:
self.logger.info('fail\n')
else:
with closing(self.api.scan(active=0)) as self.sse1:
count = 0
for data1 in self.sse1:
if count < 200:
if 'scanData' in data1:
self.fail('passive scan start fail')
self.sse1.close()
self.logger.error('passive scan start fail')
else:
count += 1
flag = True
else:
flag = True
# self.sse.close()
self.logger.debug('Step1:passive scan start success')
break
with closing(self.api.scan(active=1)) as self.sse2:
count = 0
for data2 in self.sse2:
if count < 200:
if 'scanData' in data2:
flag = True
self.logger.debug(
'Step1:Active scan start success')
break
else:
count += 1
flag = True
else:
self.fail('Active scan start failed')
self.sse2.close()
self.logger.error('Step2:Active scan start success')
with closing(self.api.scan(active=0)) as self.sse3:
count = 0
for data3 in self.sse3:
if count < 200:
if 'scanData' in data3:
self.fail('passive scan start fail')
self.sse3.close()
self.logger.error('passive scan start fail')
else:
count += 1
flag = True
else:
flag = True
self.logger.debug('Step3:passive scan start success')
break
with closing(self.api.scan(active=1)) as self.sse4:
count = 0
for data4 in self.sse4:
if count < 200:
if 'scanData' in data4:
flag = True
self.logger.debug(
'Step1:Active scan start success')
break
else:
count += 1
flag = True
else:
self.fail('Active scan start failed')
self.sse4.close()
self.logger.error('Step4:Active scan start success')
with closing(self.api.scan(chip=1, active=0)) as self.sse5:
count = 0
for data1 in self.sse5:
if count < 200:
if 'scanData' in data1:
self.fail('passive scan start fail')
self.sse5.close()
self.logger.error('passive scan start fail')
else:
count += 1
flag = True
else:
flag = True
# self.sse.close()
self.logger.debug('Step1:passive scan start success')
break
with closing(self.api.scan(chip=1, active=1)) as self.sse6:
count = 0
for data2 in self.sse6:
if count < 200:
if 'scanData' in data2:
flag = True
self.logger.debug(
'Step1:Active scan start success')
break
else:
count += 1
flag = True
else:
self.fail('Active scan start failed')
self.sse6.close()
self.logger.error('Step2:Active scan start success')
with closing(self.api.scan(chip=1, active=0)) as self.sse7:
count = 0
for data3 in self.sse7:
if count < 200:
if 'scanData' in data3:
self.fail('passive scan start fail')
self.sse7.close()
self.logger.error('passive scan start fail')
else:
count += 1
flag = True
else:
flag = True
self.logger.debug('Step3:passive scan start success')
break
with closing(self.api.scan(chip=1, active=1)) as self.sse8:
count = 0
for data4 in self.sse8:
if count < 200:
if 'scanData' in data4:
flag = True
self.logger.debug(
'Step1:Active scan start success')
break
else:
count += 1
flag = True
else:
self.fail('Active scan start failed')
self.sse8.close()
self.logger.error('Step4:Active scan start success')
if flag:
self.logger.info('pass\n')
else:
self.logger.info('fail\n')
# noinspection PyUnreachableCode
def close(self):
self.fail("Case failed,start scan timeout.")
self.logger.error("Case failed,start scan timeout.")
