def writeBeamPropertyDefinition(fName, spar_stn_list, biplane_flag_list, layup_data, beam_property_name, property_definition_type, coordinate_type, comments, read_layup_eta=True, print_flag=False):
"""
Write the DYMORE-formatted @BEAM_PROPERTY_DEFINITION code block to a file.
Parameters
----------
fName : <string>
A filename. The beam property definition code block will be saved here.
spar_stn_list : <list of ints>
A list of stations whose properties will be included in this code block.
layup_data : <np.array>
An array of cross-sectional data for the entire spar.
This data has been obtained from a layup file.
(See truegrid.read_layup.readLayupFile(...))
beam_property_name : <string>
The label associated with this beam property definition.
property_definition_type : <string>
The format of the properties.
Acceptable values are: 'SECTIONAL_PROPERTIES',
'6X6_MATRICES', or
'PROPERTY_TABLES'
coordinate_type : <string>
The format of coordinates along the span of the beam.
Acceptable values are: 'ETA_COORDINATE',
'CURVILINEAR_COORDINATE' (not yet supported), or
'AXIAL_COORDINATE' (not yet supported)
comments : <string>
The user-defined comment associated with this code block.
read_layup_eta : <logical>
Set to False to use local eta values from a subset of spar stations.
(See truegrid.read_layup_sparStns_to_eta(...))
print_flag : <logical>
Set to True to print debugging information to the screen.
Returns
-------
<none> (However, a file is written to hard disk.)
"""
dymoreMKfile = du.makeFile(dymore_MKblock_filename)
tab = ' '
# write the header for the beam property definition
dymoreMKfile.write('@BEAM_PROPERTY_DEFINITION {\n')
dymoreMKfile.write(tab*1 + '@BEAM_PROPERTY_NAME {' + beam_property_name + '} {\n')
dymoreMKfile.write(tab*2 + '@PROPERTY_DEFINITION_TYPE {' + property_definition_type + '}\n')
dymoreMKfile.write(tab*2 + '@COORDINATE_TYPE {' + coordinate_type + '}\n')
dymoreMKfile.write(tab*2 + '\n')
if not read_layup_eta:
(eta, x1) = rl.sparStns_to_eta(layup_data, spar_stn_list[0], spar_stn_list[-1], pretty_print=print_flag)
# write the mass and stiffness matrices for the beam property definition
for n in range(len(spar_stn_list)):
spar_station = spar_stn_list[n]
if spar_station < 10:
basefilestr = 'spar_station_0' + str(spar_station)
else:
basefilestr = 'spar_station_' + str(spar_station)
if print_flag:
print ''
print '***************'
print basefilestr, ' is_biplane =', biplane_flag_list[n]
print '***************'
# ----------------------------------------------------------------------------------
stationData = rl.extractStationData(layup_data,spar_station)
if stationData['spar station'] < 10:
sparstnstr = '0' + str(stationData['spar station'])
else:
sparstnstr = str(stationData['spar station'])
# vabsMK = 'VABS/M_and_K_matrices/spar_station_' + sparstnstr + '.dat.K'
if biplane_flag_list[n]:
vabsMK = 'VABS/cs_database/biplane_full-hSW/spar_station_' + sparstnstr + '.dat.K'
else:
vabsMK = 'VABS/cs_database/monoplane/spar_station_' + sparstnstr + '.dat.K'
if not read_layup_eta:
stationData['eta'] = eta[n]
du.writeMKmatrices(dymoreMKfile, vabsMK, stationData, CoordType=coordinate_type, debug_flag=False)
# Format the comments for a Dymore code block. Maximum comment length is 5 lines of 120 characters each
comments = du.formatComments(comments)
# write the footer for the beam property definition
dymoreMKfile.write(tab*2 + '@COMMENTS {' + comments + '}\n')
dymoreMKfile.write(tab*1 + '}\n')
dymoreMKfile.write('}\n')
# close the file, which now contains the complete beam property defintion
dymoreMKfile.close()
return
def writeOrientationDistributionDefinition(fName, spar_stn_list, layup_data, orientation_distribution_name, orientation_definition_type, coordinate_type, comments, untwisted=False, read_layup_eta=True, print_flag=False):
"""
Write the DYMORE-formatted @ORIENTATION_DISTRIBUTION_DEFINITION code block.
Parameters
----------
fName : <string>
A filename. The beam property definition code block will be saved here.
spar_stn_list : <list of ints>
A list of stations whose properties will be included in this code block.
layup_data : <np.array>
An array of cross-sectional data for the entire spar.
This data has been obtained from a layup file.
(See truegrid.read_layup.readLayupFile(...))
orientation_distribution_name : <string>
The label associated with this orientation distribution definition.
orientation_definition_type : <string>
The format of the orientation triads.
Acceptable values are: 'TWIST_ANGLE',
'VECTORS_E2_E3' (not yet supported), or
'EULER_ANGLES_313' (not yet supported), or
'EULER_ANGLES_323' (not yet supported), or
'EULER_ANGLES_321' (not yet supported), or
'EULER_ANGLES_312' (not yet supported)
coordinate_type : <string>
The format of coordinates along the span of the beam.
Acceptable values are: 'ETA_COORDINATE',
'CURVILINEAR_COORDINATE' (not yet supported), or
'AXIAL_COORDINATE' (not yet supported)
comments : <string>
The user-defined comment associated with this code block.
untwisted : <logical>
Set to True to force all TWIST_ANGLE entries to be zero.
read_layup_eta : <logical>
Set to False to use local eta values from a subset of spar stations.
(See truegrid.read_layup_sparStns_to_eta(...))
print_flag : <logical>
Set to True to print debugging information to the screen.
Returns
-------
<none> (However, a file is written to hard disk.)
Example output
--------------
@ORIENTATION_DISTRIBUTION_DEFINITION {
@ORIENTATION_DISTRIBUTION_NAME { orientationSpar } {
@ORIENTATION_DEFINITION_TYPE { TWIST_ANGLE }
@COORDINATE_TYPE { ETA_COORDINATE }
@ETA_COORDINATE {0.00000e+00}
@TWIST_ANGLE {12.1}
@ETA_COORDINATE {2.17628e-03}
@TWIST_ANGLE {10.5}
...
@COMMENTS{CommentText}
}
}
"""
dymoreOrientationFile = du.makeFile(fName)
tab = ' '
# write the header for the orientation distribution definition
dymoreOrientationFile.write('@ORIENTATION_DISTRIBUTION_DEFINITION {\n')
dymoreOrientationFile.write(tab*1 + '@ORIENTATION_DISTRIBUTION_NAME {' + orientation_distribution_name + '} {\n')
dymoreOrientationFile.write(tab*2 + '@ORIENTATION_DEFINITION_TYPE {' + orientation_definition_type + '}\n')
dymoreOrientationFile.write(tab*2 + '@COORDINATE_TYPE {' + coordinate_type + '}\n')
dymoreOrientationFile.write(tab*2 + '\n')
if not read_layup_eta:
(eta, x1) = rl.sparStns_to_eta(layup_data, spar_stn_list[0], spar_stn_list[-1], pretty_print=print_flag)
# write the eta and twist values for the orientation distribution definition
for n in range(len(spar_stn_list)):
spar_station = spar_stn_list[n]
if spar_station < 10:
basefilestr = 'spar_station_0' + str(spar_station)
else:
basefilestr = 'spar_station_' + str(spar_station)
if print_flag:
print ''
print '***************'
print basefilestr
print '***************'
# ----------------------------------------------------------------------------------
stationData = rl.extractStationData(layup_data,spar_station)
if stationData['spar station'] < 10:
sparstnstr = '0' + str(stationData['spar station'])
else:
sparstnstr = str(stationData['spar station'])
if coordinate_type == 'ETA_COORDINATE':
if read_layup_eta:
coord = stationData['eta']
else:
coord = eta[n]
dymoreOrientationFile.write(tab*2 + '@ETA_COORDINATE {' + ('%11.5e' % coord) + '}\n')
elif coordinate_type == 'CURVILINEAR_COORDINATE':
# f.write(tab*2 + '@CURVILINEAR_COORDINATE {' + ('%11.5e' % coord) + '}\n')
print "***WARNING*** CURVILINEAR_COORDINATE feature is not yet supported."
elif coordinate_type == 'AXIAL_COORDINATE':
# dymoreOrientationFile.write(tab*2 + '@AXIAL_COORDINATE {' + ('%11.5e' % stationData['x1']) + '}\n')
print "***WARNING*** AXIAL_COORDINATE feature is not yet supported."
if untwisted:
tw = 0.0
else:
tw = stationData['twist degrees']
dymoreOrientationFile.write(tab*2 + '@TWIST_ANGLE {' + ('%11.5e' % tw) + '}\n')
dymoreOrientationFile.write(tab*2 + '\n')
# Format the comments for a Dymore code block. Maximum comment length is 5 lines of 120 characters each
comments = du.formatComments(comments)
# write the footer for the orientation distribution definition
dymoreOrientationFile.write(tab*2 + '@COMMENTS {' + comments + '}\n')
dymoreOrientationFile.write(tab*1 + '}\n')
dymoreOrientationFile.write('}\n')
# close the file, which now contains the complete orientation distribution defintion
dymoreOrientationFile.close()