def _codegen_jmp(context: Context, op: Op) -> Tuple[Context, Op]:
"""JMP pseudoinstruction: several underlying variants."""
op = op._replace(args=parse_args_if_able(
_PARSE_OPTIONS, context, op, Type.ADDRESS | Type.DEREF_REGISTER
| Type.DEREF_ADDRESS))
# Since this pseudoinstruction can produce code of different lengths, we
# handle updating pos when "not all_args_parsed" in a special way.
if not all_args_parsed(op.args):
advance = 4 if op.args[0].argtype & Type.ADDRESS else 2
return context.advance_by_bytes(advance), op
# We are branching to an address literal.
if op.args[0].argtype & Type.ADDRESS:
_jmpdestcheck(op.args[0])
op = op._replace(todo=None,
hex='D001{:04X}'.format(op.args[0].integer))
# We are branching to an address stored at a memory location in a register.
# (To branch to an address inside a register, use RET).
elif op.args[0].argtype & Type.DEREF_REGISTER:
_regderefcheck(op.args[0], postcrem_from=0, postcrem_to=0)
op = op._replace(todo=None, hex='D0{:X}8'.format(op.args[0].integer))
# We are branching to an address stored at a low memory location.
else:
_lowwordaddrcheck(op.args[0])
op = op._replace(todo=None,
hex='20{:02X}'.format(op.args[0].integer // 2))
return context.advance(op.hex), op
def codegen_immed_to_reg(context: Context, op: Op) -> Tuple[Context, Op]:
op = op._replace(args=parse_args_if_able(_PARSE_OPTIONS, context, op,
Type.REGISTER, Type.NUMBER))
if all_args_parsed(op.args):
_regcheck(op.args[0])
_bytecheck(op.args[1])
digits = (nybble, op.args[0].integer, op.args[1].integer % 256)
op = op._replace(todo=None, hex='{:X}{:X}{:02X}'.format(*digits))
# We can still update pos whether we've parsed all args or not.
return context.advance_by_bytes(2), op
def codegen_onereg(context: Context, op: Op) -> Tuple[Context, Op]:
# Both register arguments to this opcode should be parseable.
op = op._replace(args=parse_args_if_able(_PARSE_OPTIONS, context, op,
Type.REGISTER))
if all_args_parsed(op.args):
_regcheck(*op.args)
digits = (nybble_1, op.args[0].integer, nybble_2)
op = op._replace(todo=None, hex=template.format(*digits))
# We can still update pos whether we've parsed all args or not.
return context.advance_by_bytes(2), op
def _codegen_ctrl(context: Context, op: Op) -> Tuple[Context, Op]:
"""CTRL instruction."""
op = op._replace(args=parse_args_if_able(_PARSE_OPTIONS, context, op,
Type.ADDRESS, Type.NUMBER))
if all_args_parsed(op.args):
_devcheck(op.args[0])
_bytecheck(op.args[1])
digits = (op.args[0].integer, op.args[1].integer % 256)
op = op._replace(todo=None, hex='1{:X}{:02X}'.format(*digits))
# We can still update pos whether we've parsed all args or not.
return context.advance_by_bytes(2), op
def _codegen_putb(context: Context, op: Op) -> Tuple[Context, Op]:
"""PUTB instruction."""
op = op._replace(args=parse_args_if_able(
_PARSE_OPTIONS, context, op, Type.ADDRESS, Type.DEREF_REGISTER))
if all_args_parsed(op.args):
_devcheck(op.args[0])
_regderefcheck(op.args[1], postcrem_from=-4, postcrem_to=4)
modifier = _postcrement_to_modifier(op.args[1].postcrement)
digits = (op.args[0].integer, op.args[1].integer, modifier)
op = op._replace(todo=None, hex='4{:X}{:X}{:X}'.format(*digits))
# We can still update pos whether we've parsed all args or not.
return context.advance_by_bytes(2), op
def _codegen_lwi(context: Context, op: Op) -> Tuple[Context, Op]:
"""LWI pseudoinstruction: MOVE RX, (RO)+; DW i."""
op = op._replace(args=parse_args_if_able(_PARSE_OPTIONS, context, op,
Type.REGISTER, Type.NUMBER))
if all_args_parsed(op.args):
_regcheck(op.args[0])
if not -32767 <= op.args[1].integer <= 65535:
raise ValueError(
'Halfword literal {} not in range -32768..65535'.format(
op.args[1].stripped))
digits = (op.args[0].integer, op.args[1].integer % 65536)
op = op._replace(todo=None, hex='D{:X}01{:04X}'.format(*digits))
# We can still update pos whether we've parsed all args or not.
return context.advance_by_bytes(4), op
def _codegen_call(context: Context, op: Op) -> Tuple[Context, Op]:
"""CALL pseudoinstruction: several underlying variants."""
op = op._replace(args=parse_args_if_able(
_PARSE_OPTIONS, context, op, Type.ADDRESS | Type.REGISTER
| Type.DEREF_REGISTER | Type.DEREF_ADDRESS, Type.REGISTER))
# Since this pseudoinstruction can produce code of different lengths, we
# handle updating pos when "not all_args_parsed" in a special way.
if not all_args_parsed(op.args):
advance = 6 if op.args[0].argtype & Type.ADDRESS else 4
return context.advance_by_bytes(advance), op
# We are calling an address literal. Note that there is a way to do this in
# two halfwords: for that, use the RCALL pseudoinstruction.
if op.args[0].argtype & Type.ADDRESS:
_jmpdestcheck(op.args[0])
_regcheck(op.args[1])
digits_a = (op.args[1].integer, op.args[1].integer, op.args[0].integer)
op = op._replace(todo=None,
hex='0{:X}03D0{:X}1{:04X}'.format(*digits_a))
# We are calling an address stored inside a register.
elif op.args[0].argtype & Type.REGISTER:
_callregcheck(op.args[0], op.args[1])
digits_r = (op.args[1].integer, op.args[0].integer)
op = op._replace(todo=None, hex='0{:X}0300{:X}4'.format(*digits_r))
# We are calling an address stored at a memory location in a register.
elif op.args[0].argtype & Type.DEREF_REGISTER:
_callregcheck(op.args[0], op.args[1])
_regderefcheck(op.args[0], postcrem_from=-2, postcrem_to=2) # Words.
modifier = _postcrement_to_modifier(2 * op.args[0].postcrement)
digits_d = (op.args[1].integer, op.args[0].integer, modifier)
op = op._replace(todo=None, hex='0{:X}03D0{:X}{:X}'.format(*digits_d))
# We are calling an address stored at a low memory location.
else:
_regcheck(op.args[1])
_lowwordaddrcheck(op.args[0])
assert op.opcode is not None # mypy...
if op.args[0].precrement or op.args[0].postcrement:
raise ValueError(
'No (in/de)crementation is allowed for address dereference arguments '
'to {}'.format(op.opcode.upper()))
digits = (op.args[1].integer, op.args[0].integer // 2)
op = op._replace(todo=None, hex='0{:X}0320{:02X}'.format(*digits))
return context.advance(op.hex), op
def _codegen_move(context: Context, op: Op) -> Tuple[Context, Op]:
"""MOVE instruction."""
op = op._replace(
args=parse_args_if_able( # Note fractional crements enabled.
_PARSE_OPTIONS._replace(
fractional_crements=True), context, op, Type.ADDRESS
| Type.REGISTER | Type.DEREF_REGISTER, Type.ADDRESS | Type.REGISTER
| Type.DEREF_REGISTER))
if all_args_parsed(op.args):
if not any(arg.argtype & Type.REGISTER for arg in op.args):
raise ValueError(
'At least one argument to MOVE must be a register')
# This is a move between registers.
elif op.args[0].argtype == op.args[1].argtype == Type.REGISTER:
_regcheck(*op.args)
digits_r = (op.args[0].integer, op.args[1].integer)
op = op._replace(todo=None, hex='0{:X}{:X}4'.format(*digits_r))
# This is a move from/to an address found at a specified memory location.
elif any(arg.argtype == Type.ADDRESS for arg in op.args):
nybble, argaddr, argreg = ((2, op.args[1],
op.args[0]) if op.args[0].argtype
& Type.REGISTER else
(3, op.args[0], op.args[1]))
_regcheck(argreg)
_lowwordaddrcheck(argaddr)
digits_a = (nybble, argreg.integer, argaddr.integer // 2)
op = op._replace(todo=None, hex='{:X}{:X}{:02X}'.format(*digits_a))
# This is a move from/to an address found in a register.
else:
nybble, argderef, argreg = ((5, op.args[0],
op.args[1]) if op.args[0].argtype
& Type.DEREF_REGISTER else
(0xD, op.args[1], op.args[0]))
_regcheck(argreg)
_regderefcheck(argderef, postcrem_from=-2, postcrem_to=2) # Words.
modifier = _postcrement_to_modifier(2 * argderef.postcrement)
digits_d = (nybble, op.args[1].integer, op.args[0].integer,
modifier)
op = op._replace(todo=None,
hex='{:X}{:X}{:X}{:X}'.format(*digits_d))
# We can still update pos whether we've parsed all args or not.
return context.advance_by_bytes(2), op
def _codegen_bra(context: Context, op: Op) -> Tuple[Context, Op]:
"""BRA pseudoinstruction: ADD/SUB R0,#<dist>."""
op = op._replace(
args=parse_args_if_able(_PARSE_OPTIONS, context, op, Type.ADDRESS))
if all_args_parsed(op.args) and context.pos is not None:
_jmpdestcheck(op.args[0])
offset = _reljmpoffset(context, op.args[0])
if offset == 0:
logging.warning(
'Line %d: A BRA of +2 bytes (so, an ordinary PC increment) is not '
'supported by the usual relative jump techniques; generating a NOP '
'(MOVE R0, R0) instead', op.lineno)
op = op._replace(todo=None, hex='0004')
else:
digits = (0xA, offset - 1) if offset > 0 else (0xF, -offset - 1)
op = op._replace(todo=None, hex='{:X}0{:02X}'.format(*digits))
# We can still update pos whether we've parsed all args or not.
return context.advance_by_bytes(2), op
def _codegen_movb(context: Context, op: Op) -> Tuple[Context, Op]:
"""MOVB instruction."""
op = op._replace(
args=parse_args_if_able(_PARSE_OPTIONS, context, op, Type.REGISTER
| Type.DEREF_REGISTER, Type.REGISTER
| Type.DEREF_REGISTER))
# Both arguments to this opcode should be parseable.
if op.args[0].argtype == op.args[1].argtype:
raise ValueError(
'One MOVB argument should be a register, and the other should be a '
'register dereference')
if all_args_parsed(op.args):
nybble, argderef, argreg = ((6, op.args[1],
op.args[0]) if op.args[0].argtype
& Type.REGISTER else
(7, op.args[0], op.args[1]))
_regcheck(argreg)
_regderefcheck(argderef, postcrem_from=-4, postcrem_to=4)
modifier = _postcrement_to_modifier(argderef.postcrement)
digits = (nybble, argreg.integer, argderef.integer, modifier)
op = op._replace(todo=None, hex='{:X}{:X}{:X}{:X}'.format(*digits))
# We can still update pos whether we've parsed all args or not.
return context.advance_by_bytes(2), op
def _codegen_rcall(context: Context, op: Op) -> Tuple[Context, Op]:
"""RCALL (R=relocatable) pseudoinstruction: INC2 Rx,R0; BRA <addr>."""
op = op._replace(args=parse_args_if_able(_PARSE_OPTIONS, context, op,
Type.ADDRESS, Type.REGISTER))
assert op.args is not None
if all_args_parsed(op.args) and context.pos is not None:
_jmpdestcheck(op.args[0])
_regcheck(op.args[1])
offset = _reljmpoffset(context, op.args[0])
if offset == 0:
logging.warning(
'Line %d: A +2-byte RCALL (so, an ordinary PC increment) is not '
'supported by the usual relative jump techniques; generating a NOP '
'(MOVE R0, R0) instead', op.lineno)
op = op._replace(todo=None,
hex='0{:X}030004'.format(op.args[1].integer))
else:
digits = ((op.args[1].integer, 0xA, offset - 1) if offset > 0 else
(op.args[1].integer, 0xF, -offset - 1))
op = op._replace(todo=None,
hex='0{:X}03{:X}0{:02X}'.format(*digits))
# We can still update pos whether we've parsed all args or not.
return context.advance_by_bytes(4), op
def codegen_add_or_sub(context: Context, op: Op) -> Tuple[Context, Op]:
op = op._replace(args=parse_args_if_able(_PARSE_OPTIONS, context, op,
Type.REGISTER, Type.NUMBER
| Type.REGISTER))
if all_args_parsed(op.args):
_regcheck(op.args[0])
# Adding/subtracting an immediate value to/from a register.
if op.args[1].argtype & Type.NUMBER:
if not 0 <= op.args[1].integer <= 256:
raise ValueError('Literal {!r} not in range 0..256'.format(
op.args[1].stripped))
elif op.args[1].integer == 0:
assert op.opcode is not None # mypy...
logging.warning(
'Line %d: A #0 literal argument to %s is not supported by the %s '
'instruction; generating a NOP (MOVE R0, R0) instead',
op.lineno, op.opcode.upper(), op.opcode.upper())
op = op._replace(todo=None, hex='0004')
else:
digits = (0xA if add_or_sub == 'add' else 0xF,
op.args[0].integer,
(op.args[1].integer - 1) % 256)
op = op._replace(todo=None,
hex='{:X}{:X}{:02X}'.format(*digits))
# Adding/subtracting the LSB of one register to/from another register.
else:
_regcheck(op.args[1])
digits = (op.args[0].integer, op.args[1].integer,
8 if add_or_sub == 'add' else 9)
op = op._replace(todo=None,
hex='0{:X}{:X}{:X}'.format(*digits))
# We can still update pos whether we've parsed all args or not.
return context.advance_by_bytes(2), op